mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-14 12:21:15 -04:00
fb5bc347311b1d78dc608c91c2d68327b0a1d1d4
1395387 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Linus Torvalds
|
fb5bc34731 |
Merge tag 'loongarch-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson
Pull LoongArch updates from Huacai Chen: - Initialize acpi_gbl_use_global_lock to false - Allow specify SIMD width via kernel parameters - Add kexec_file (both EFI & ELF format) support - Add PER_VMA_LOCK for page fault handling support - Improve BPF trampoline support - Update the default config file - Some bug fixes and other small changes * tag 'loongarch-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson: (23 commits) LoongArch: Update Loongson-3 default config file LoongArch: BPF: Sign-extend struct ops return values properly LoongArch: BPF: Make error handling robust in arch_prepare_bpf_trampoline() LoongArch: BPF: Make trampoline size stable LoongArch: BPF: Don't align trampoline size LoongArch: BPF: No support of struct argument in trampoline programs LoongArch: BPF: No text_poke() for kernel text LoongArch: BPF: Remove duplicated bpf_flush_icache() LoongArch: BPF: Remove duplicated flags check LoongArch: BPF: Fix uninitialized symbol 'retval_off' LoongArch: BPF: Optimize sign-extention mov instructions LoongArch: Handle new atomic instructions for probes LoongArch: Try VMA lock-based page fault handling first LoongArch: Automatically disable kaslr if boot from kexec_file LoongArch: Add crash dump support for kexec_file LoongArch: Add ELF binary support for kexec_file LoongArch: Add EFI binary support for kexec_file LoongArch: Add preparatory infrastructure for kexec_file LoongArch: Add struct loongarch_image_header for kernel LoongArch: Allow specify SIMD width via kernel parameters ... |
||
|
Linus Torvalds
|
fc282d1731 |
Merge tag 'uml-for-linux-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux
Pull uml updates from Johannes Berg: - minor preparations for SMP support - SPARSE_IRQ support for kunit - help output cleanups * tag 'uml-for-linux-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/uml/linux: um: Remove unused ipi_pipe field from cpuinfo_um um: Remove unused cpu_data and current_cpu_data macros um: Stop tracking virtual CPUs via mm_cpumask() um: Centralize stub size calculations um: Remove outdated comment about STUB_DATA_PAGES um: Remove unused offset and child_err fields from stub_data um: Indent time-travel help messages um: Fix help message for ssl-non-raw um: vector: Fix indentation for help message um: Add missing trailing newline to help messages um: virtio-pci: implement .shutdown() um: Support SPARSE_IRQ |
||
|
Linus Torvalds
|
ba9dac9873 |
Merge tag 'libnvdimm-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm
Pull libnvdimm updates from Ira Weiny: "Primarily bug fixes. Dave introduced the usage of cleanup.h a bit late in the cycle to help with the new label work required within CXL [1] nvdimm: - Return -ENOMEM if devm_kcalloc() fails in ndtest_probe() - Clean up __nd_ioctl() and remove gotos - Remove duplicate linux/slab.h header - Introduce guard() for nvdimm_bus_lock - Use str_plural() to simplify the code ACPI: - NFIT: Fix incorrect ndr_desc being reportedin dev_err message" Link: https://lore.kernel.org/all/20250917134116.1623730-1-s.neeraj@samsung.com/ [1] * tag 'libnvdimm-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm: nvdimm: Remove duplicate linux/slab.h header nvdimm: ndtest: Return -ENOMEM if devm_kcalloc() fails in ndtest_probe() nvdimm: Clean up __nd_ioctl() and remove gotos nvdimm: Introduce guard() for nvdimm_bus_lock ACPI: NFIT: Fix incorrect ndr_desc being reportedin dev_err message nvdimm: Use str_plural() to simplify the code |
||
|
Linus Torvalds
|
169c9d06a2 |
Merge tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog
Pull watchdog updates from Wim Van Sebroeck: - renesas,wdt: Add support for RZ/T2H and RZ/N2H - Add SMARC-sAM67 support - Several small fixes and improvements * tag 'linux-watchdog-6.18-rc1' of git://www.linux-watchdog.org/linux-watchdog: watchdog/hpwdt New maintianer dt-bindings: watchdog: add SMARC-sAM67 support watchdog: mpc8xxx_wdt: Reload the watchdog timer when enabling the watchdog watchdog: visconti: don't print superfluous errors watchdog: rzv2h_wdt: don't print superfluous errors watchdog: rzg2l_wdt: don't print superfluous errors watchdog: s3c2410_wdt: exynosautov9: Enable supported features watchdog: s3c2410_wdt: exynosautov920: Enable QUIRK_HAS_32BIT_CNT watchdog: s3c2410_wdt: Increase max timeout value of watchdog watchdog: s3c2410_wdt: Fix max_timeout being calculated larger watchdog: s3c2410_wdt: Replace hardcoded values with macro definitions watchdog: rzv2h: Improve error strings and add newlines watchdog: rzv2h: Add support for RZ/T2H watchdog: rzv2h: Add support for configurable count clock source watchdog: rzv2h: Make "oscclk" and reset controller optional watchdog: rzv2h: Obtain clock-divider and timeout values from OF match data dt-bindings: watchdog: renesas,wdt: Add support for RZ/T2H and RZ/N2H watchdog: intel_oc_wdt: Do not try to write into const memory |
||
|
Linus Torvalds
|
2f2c725493 |
Merge tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci
Pull pci updates from Bjorn Helgaas:
"Enumeration:
- Add PCI_FIND_NEXT_CAP() and PCI_FIND_NEXT_EXT_CAP() macros that
take config space accessor functions.
Implement pci_find_capability(), pci_find_ext_capability(), and
dwc, dwc endpoint, and cadence capability search interfaces with
them (Hans Zhang)
- Leave parent unit address 0 in 'interrupt-map' so that when we
build devicetree nodes to describe PCI functions that contain
multiple peripherals, we can build this property even when
interrupt controllers lack 'reg' properties (Lorenzo Pieralisi)
- Add a Xeon 6 quirk to disable Extended Tags and limit Max Read
Request Size to 128B to avoid a performance issue (Ilpo Järvinen)
- Add sysfs 'serial_number' file to expose the Device Serial Number
(Matthew Wood)
- Fix pci_acpi_preserve_config() memory leak (Nirmoy Das)
Resource management:
- Align m68k pcibios_enable_device() with other arches (Ilpo
Järvinen)
- Remove sparc pcibios_enable_device() implementations that don't do
anything beyond what pci_enable_resources() does (Ilpo Järvinen)
- Remove mips pcibios_enable_resources() and use
pci_enable_resources() instead (Ilpo Järvinen)
- Clean up bridge window sizing and assignment (Ilpo Järvinen),
including:
- Leave non-claimed bridge windows disabled
- Enable bridges even if a window wasn't assigned because not all
windows are required by downstream devices
- Preserve bridge window type when releasing the resource, since
the type is needed for reassignment
- Consolidate selection of bridge windows into two new
interfaces, pbus_select_window() and
pbus_select_window_for_type(), so this is done consistently
- Compute bridge window start and end earlier to avoid logging
stale information
MSI:
- Add quirk to disable MSI on RDC PCI to PCIe bridges (Marcos Del Sol
Vives)
Error handling:
- Align AER with EEH by allowing drivers to request a Bus Reset on
Non-Fatal Errors (in addition to the reset on Fatal Errors that we
already do) (Lukas Wunner)
- If error recovery fails, emit FAILED_RECOVERY uevents for the
devices, not for the bridge leading to them.
This makes them correspond to BEGIN_RECOVERY uevents (Lukas Wunner)
- Align AER with EEH by calling err_handler.error_detected()
callbacks to notify drivers if error recovery fails (Lukas Wunner)
- Align AER with EEH by restoring device error_state to
pci_channel_io_normal before the err_handler.slot_reset() callback.
This is earlier than before the err_handler.resume() callback
(Lukas Wunner)
- Emit a BEGIN_RECOVERY uevent when driver's
err_handler.error_detected() requests a reset, as well as when it
says recovery is complete or can be done without a reset (Niklas
Schnelle)
- Align s390 with AER and EEH by emitting uevents during error
recovery (Niklas Schnelle)
- Align EEH with AER and s390 by emitting BEGIN_RECOVERY,
SUCCESSFUL_RECOVERY, or FAILED_RECOVERY uevents depending on the
result of err_handler.error_detected() (Niklas Schnelle)
- Fix a NULL pointer dereference in aer_ratelimit() when ACPI GHES
error information identifies a device without an AER Capability
(Breno Leitao)
- Update error decoding and TLP Log printing for new errors in
current PCIe base spec (Lukas Wunner)
- Update error recovery documentation to match the current code
and use consistent nomenclature (Lukas Wunner)
ASPM:
- Enable all ClockPM and ASPM states for devicetree platforms, since
there's typically no firmware that enables ASPM
This is a risky change that may uncover hardware or configuration
defects at boot-time rather than when users enable ASPM via sysfs
later. Booting with "pcie_aspm=off" prevents this enabling
(Manivannan Sadhasivam)
- Remove the qcom code that enabled ASPM (Manivannan Sadhasivam)
Power management:
- If a device has already been disconnected, e.g., by a hotplug
removal, don't bother trying to resume it to D0 when detaching the
driver.
This avoids annoying "Unable to change power state from D3cold to
D0" messages (Mario Limonciello)
- Ensure devices are powered up before config reads for
'max_link_width', 'current_link_speed', 'current_link_width',
'secondary_bus_number', and 'subordinate_bus_number' sysfs files.
This prevents using invalid data (~0) in drivers or lspci and,
depending on how the PCIe controller reports errors, may avoid
error interrupts or crashes (Brian Norris)
Virtualization:
- Add rescan/remove locking when enabling/disabling SR-IOV, which
avoids list corruption on s390, where disabling SR-IOV also
generates hotplug events (Niklas Schnelle)
Peer-to-peer DMA:
- Free struct p2p_pgmap, not a member within it, in the
pci_p2pdma_add_resource() error path (Sungho Kim)
Endpoint framework:
- Document sysfs interface for BAR assignment of vNTB endpoint
functions (Jerome Brunet)
- Fix array underflow in endpoint BAR test case (Dan Carpenter)
- Skip endpoint IRQ test if the IRQ is out of range to avoid false
errors (Christian Bruel)
- Fix endpoint test case for controllers with fixed-size BARs smaller
than requested by the test (Marek Vasut)
- Restore inbound translation when disabling doorbell so the endpoint
doorbell test case can be run more than once (Niklas Cassel)
- Avoid a NULL pointer dereference when releasing DMA channels in
endpoint DMA test case (Shin'ichiro Kawasaki)
- Convert tegra194 interrupt number to MSI vector to fix endpoint
Kselftest MSI_TEST test case (Niklas Cassel)
- Reset tegra194 BARs when running in endpoint mode so the BAR tests
don't overwrite the ATU settings in BAR4 (Niklas Cassel)
- Handle errors in tegra194 BPMP transactions so we don't mistakenly
skip future PERST# assertion (Vidya Sagar)
AMD MDB PCIe controller driver:
- Update DT binding example to separate PERST# to a Root Port stanza
to make multiple Root Ports possible in the future (Sai Krishna
Musham)
- Add driver support for PERST# being described in a Root Port
stanza, falling back to the host bridge if not found there (Sai
Krishna Musham)
Freescale i.MX6 PCIe controller driver:
- Enable the 3.3V Vaux supply if available so devices can request
wakeup with either Beacon or WAKE# (Richard Zhu)
MediaTek PCIe Gen3 controller driver:
- Add optional sys clock ready time setting to avoid sys_clk_rdy
signal glitching in MT6991 and MT8196 (AngeloGioacchino Del Regno)
- Add DT binding and driver support for MT6991 and MT8196
(AngeloGioacchino Del Regno)
NVIDIA Tegra PCIe controller driver:
- When asserting PERST#, disable the controller instead of mistakenly
disabling the PLL twice (Nagarjuna Kristam)
- Convert struct tegra_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
Qualcomm PCIe controller driver:
- Select PCI Power Control Slot driver so slot voltage rails can be
turned on/off if described in Root Port devicetree node (Qiang Yu)
- Parse only PCI bridge child nodes in devicetree, skipping unrelated
nodes such as OPP (Operating Performance Points), which caused
probe failures (Krishna Chaitanya Chundru)
- Add 8.0 GT/s and 32.0 GT/s equalization settings (Ziyue Zhang)
- Consolidate Root Port 'phy' and 'reset' properties in struct
qcom_pcie_port, regardless of whether we got them from the Root
Port node or the host bridge node (Manivannan Sadhasivam)
- Fetch and map the ELBI register space in the DWC core rather than
in each driver individually (Krishna Chaitanya Chundru)
- Enable ECAM mechanism in DWC core by setting up iATU with 'CFG
Shift Feature' and use this in the qcom driver (Krishna Chaitanya
Chundru)
- Add SM8750 compatible to qcom,pcie-sm8550.yaml (Krishna Chaitanya
Chundru)
- Update qcom,pcie-x1e80100.yaml to allow fifth PCIe host on Qualcomm
Glymur, which is compatible with X1E80100 but doesn't have the
cnoc_sf_axi clock (Qiang Yu)
Renesas R-Car PCIe controller driver:
- Fix a typo that prevented correct PHY initialization (Marek Vasut)
- Add a missing 1ms delay after PWR reset assertion as required by
the V4H manual (Marek Vasut)
- Assure reset has completed before DBI access to avoid SError (Marek
Vasut)
- Fix inverted PHY initialization check, which sometimes led to
timeouts and failure to start the controller (Marek Vasut)
- Pass the correct IRQ domain to generic_handle_domain_irq() to fix a
regression when converting to msi_create_parent_irq_domain()
(Claudiu Beznea)
- Drop the spinlock protecting the PMSR register - it's no longer
required since pci_lock already serializes accesses (Marek Vasut)
- Convert struct rcar_msi mask_lock to raw spinlock to avoid a lock
nesting error (Marek Vasut)
SOPHGO PCIe controller driver:
- Check for existence of struct cdns_pcie.ops before using it to
allow Cadence drivers that don't need to supply ops (Chen Wang)
- Add DT binding and driver for the SOPHGO SG2042 PCIe controller
(Chen Wang)
STMicroelectronics STM32MP25 PCIe controller driver:
- Update pinctrl documentation of initial states and use in runtime
suspend/resume (Christian Bruel)
- Add pinctrl_pm_select_init_state() for use by stm32 driver, which
needs it during resume (Christian Bruel)
- Add devicetree bindings and drivers for the STMicroelectronics
STM32MP25 in host and endpoint modes (Christian Bruel)
Synopsys DesignWare PCIe controller driver:
- Add support for x16 in devicetree 'num-lanes' property (Konrad
Dybcio)
- Verify that if DT specifies a single IRQ for all eDMA channels, it
is named 'dma' (Niklas Cassel)
TI J721E PCIe driver:
- Add MODULE_DEVICE_TABLE() so driver can be autoloaded (Siddharth
Vadapalli)
- Power controller off before configuring the glue layer so the
controller latches the correct values on power-on (Siddharth
Vadapalli)
TI Keystone PCIe controller driver:
- Use devm_request_irq() so 'ks-pcie-error-irq' is freed when driver
exits with error (Siddharth Vadapalli)
- Add Peripheral Virtualization Unit (PVU), which restricts DMA from
PCIe devices to specific regions of host memory, to the ti,am65
binding (Jan Kiszka)
Xilinx NWL PCIe controller driver:
- Clear bootloader E_ECAM_CONTROL before merging in the new driver
value to avoid writing invalid values (Jani Nurminen)"
* tag 'pci-v6.18-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (141 commits)
PCI/AER: Avoid NULL pointer dereference in aer_ratelimit()
MAINTAINERS: Add entry for ST STM32MP25 PCIe drivers
PCI: stm32-ep: Add PCIe Endpoint support for STM32MP25
dt-bindings: PCI: Add STM32MP25 PCIe Endpoint bindings
PCI: stm32: Add PCIe host support for STM32MP25
PCI: xilinx-nwl: Fix ECAM programming
PCI: j721e: Fix incorrect error message in probe()
PCI: keystone: Use devm_request_irq() to free "ks-pcie-error-irq" on exit
dt-bindings: PCI: qcom,pcie-x1e80100: Set clocks minItems for the fifth Glymur PCIe Controller
PCI: dwc: Support 16-lane operation
PCI: Add lockdep assertion in pci_stop_and_remove_bus_device()
PCI/IOV: Add PCI rescan-remove locking when enabling/disabling SR-IOV
PCI: rcar-host: Convert struct rcar_msi mask_lock into raw spinlock
PCI: tegra194: Rename 'root_bus' to 'root_port_bus' in tegra_pcie_downstream_dev_to_D0()
PCI: tegra: Convert struct tegra_msi mask_lock into raw spinlock
PCI: rcar-gen4: Fix inverted break condition in PHY initialization
PCI: rcar-gen4: Assure reset occurs before DBI access
PCI: rcar-gen4: Add missing 1ms delay after PWR reset assertion
PCI: Set up bridge resources earlier
PCI: rcar-host: Drop PMSR spinlock
...
|
||
|
Linus Torvalds
|
e4c0fdd5af |
Merge tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine
Pull dmaengine updates from Vinod Koul: "A couple of new device support and small driver updates for this round. New support: - Intel idxd Wildcat Lake family support - SpacemiT K1 PDMA controller support - Renesas RZ/G3E family support Updates: - Xilinx shutdown support and dma client properties update - Designware edma callback_result support" * tag 'dmaengine-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: dt-bindings: dma: rz-dmac: Document RZ/G3E family of SoCs dmaengine: dw-edma: Set status for callback_result dmaengine: mv_xor: match alloc_wc and free_wc dmaengine: mmp_pdma: Add SpacemiT K1 PDMA support with 64-bit addressing dmaengine: mmp_pdma: Add operations structure for controller abstraction dmaengine: mmp_pdma: Add reset controller support dmaengine: mmp_pdma: Add clock support dt-bindings: dma: Add SpacemiT K1 PDMA controller dt-bindings: dmaengine: xilinx_dma: Remove DMA client properties dmaengine: Fix dma_async_tx_descriptor->tx_submit documentation dmaengine: xilinx_dma: Support descriptor setup from dma_vecs dmaengine: sh: setup_xref error handling dmaengine: Replace zero-length array with flexible-array dmaengine: ppc4xx: Remove space before newline dmaengine: idxd: Add a new IAA device ID for Wildcat Lake family platforms dmaengine: idxd: Replace memset(0) + strscpy() with strscpy_pad() dt-bindings: dma: nvidia,tegra20-apbdma: Add undocumented compatibles and "clock-names" dmaengine: zynqmp_dma: Add shutdown operation support |
||
|
Linus Torvalds
|
1d1ba4d390 |
Merge tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy
Pull phy updates from Vinod Koul:
"The usual bunch of device support and update to drivers.
New Support
- Qualcomm SM8750 QMP PCIe PHY dual lane support, PMIV0104 eusb2
repeater support, QCS8300 eDP PHY support
- Renesas RZ/T2H and RZ/N2H support and updates to driver for that
- TI TCAN1051 phy support
- Rockchip rk3588 dphy support, RK3528 combphy support
Updates:
- cadence updates for calibration and polling for ready and enabling
of lower resolutions, runtime pm support,
- Rockchip: enable U3 otg port
- Renesas USXGMII mode support
- Qualcomm UFS PHY and PLL regulator load support"
* tag 'phy-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/phy/linux-phy: (64 commits)
phy: rockchip: phy-rockchip-inno-csidphy: add support for rk3588 variant
phy: rockchip: phy-rockchip-inno-csidphy: allow for different reset lines
phy: rockchip: phy-rockchip-inno-csidphy: allow writes to grf register 0
dt-bindings: phy: rockchip-inno-csi-dphy: add rk3588 variant
dt-bindings: phy: rockchip-inno-csi-dphy: make power-domains non-required
phy: cadence: cdns-dphy: Enable lower resolutions in dphy
phy: renesas: r8a779f0-ether-serdes: add new step added to latest datasheet
phy: renesas: r8a779f0-ether-serdes: add USXGMII mode
phy: sophgo: Add USB 2.0 PHY driver for Sophgo CV18XX/SG200X
dt-bindings: phy: Add Sophgo CV1800 USB phy
phy: cadence: cdns-dphy: Update calibration wait time for startup state machine
phy: cadence: cdns-dphy: Fix PLL lock and O_CMN_READY polling
phy: renesas: rcar-gen3-usb2: Fix ID check logic with VBUS valid
dt-bindings: phy: ti,tcan104x-can: Document TI TCAN1051
phy: lynx-28g: check return value when calling lynx_28g_pll_get
phy: qcom: m31-eusb2: Fix the error log while enabling clock
phy: rockchip: usbdp: Remove redundant ternary operators
phy: renesas: rcar-gen3-usb2: Remove redundant ternary operators
phy: hisilicon: Remove redundant ternary operators
phy: qcom-qmp-ufs: Add PHY and PLL regulator load
...
|
||
|
Linus Torvalds
|
58b65f6dcc |
Merge tag 'soundwire-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire
Pull soundwire updates from Vinod Koul:
"A very small update this time
- add few registers to debugfs
- core: drop dev_pm_domain_detach() call and use min() to improve
code"
* tag 'soundwire-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: Use min() to improve code
soundwire: bus: Drop dev_pm_domain_detach() call
soundwire: debugfs: add SCP_SDCA_IntStatX and SCP_SDCA_IntMaskX registers
|
||
|
Linus Torvalds
|
fd94619c43 |
Merge tag 'zonefs-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs
Pull zonefs update from Damien Le Moal: - Some comment spelling fixes (Xichao) * tag 'zonefs-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/dlemoal/zonefs: zonefs: correct some spelling mistakes |
||
|
Linus Torvalds
|
4b616669d1 |
Merge tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux
Pull ata updates from Damien Le Moal: - Improve the DT bindings documentation for the highbanck, imx and xgene-ahci controllers (Krzysztof, Fabio, Rob) * tag 'ata-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux: dt-bindings: ata: apm,xgene-ahci: Add apm,xgene-ahci-v2 support dt-bindings: ata: imx: Document 'target-supply' dt-bindings: ata: highbank: Minor whitespace cleanup in example |
||
|
Linus Torvalds
|
7a405dbb0f |
Merge tag 'mm-stable-2025-10-03-16-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm
Pull more MM updates from Andrew Morton:
"Only two patch series in this pull request:
- "mm/memory_hotplug: fixup crash during uevent handling" from Hannes
Reinecke fixes a race that was causing udev to trigger a crash in
the memory hotplug code
- "mm_slot: following fixup for usage of mm_slot_entry()" from Wei
Yang adds some touchups to the just-merged mm_slot changes"
* tag 'mm-stable-2025-10-03-16-49' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm/khugepaged: use KMEM_CACHE()
mm/ksm: cleanup mm_slot_entry() invocation
Documentation/mm: drop pxx_mkdevmap() descriptions from page table helpers
mm: clean up is_guard_pte_marker()
drivers/base: move memory_block_add_nid() into the caller
mm/memory_hotplug: activate node before adding new memory blocks
drivers/base/memory: add node id parameter to add_memory_block()
|
||
|
Linus Torvalds
|
cf0e371d2b |
Merge tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi
Pull EFI updates from Ard Biesheuvel: - Document what OVMF stands for (Open Virtual Machine Firmware) - Clear NX restrictions also from 'more reliable' type memory when using the DXE service API * tag 'efi-next-for-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/efi/efi: efi/x86: Memory protection on EfiGcdMemoryTypeMoreReliable efi: Explain OVMF acronym in OVMF_DEBUG_LOG help text |
||
|
Linus Torvalds
|
678074f1a8 |
Merge tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity
Pull integrity updates from Mimi Zohar: "Just a couple of changes: crypto code cleanup and a IMA xattr bug fix" * tag 'integrity-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/zohar/linux-integrity: ima: don't clear IMA_DIGSIG flag when setting or removing non-IMA xattr lib/digsig: Use SHA-1 library instead of crypto_shash integrity: Select CRYPTO from INTEGRITY_ASYMMETRIC_KEYS |
||
|
Linus Torvalds
|
6a74422b97 |
Merge tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux
Pull MIPS updates from Thomas Bogendoerfer: - switch longson32 platform to DT and use MIPS_GENERIC framework - cleanups/fixes for lantiq DTs - other cleanups and fixes * tag 'mips_6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux: (30 commits) mips: math-emu: replace deprecated strcpy() in me-debugfs MIPS: configs: Consolidate Loongson1 defconfigs MIPS: Unify Loongson1 PRID_REV MIPS: loongson32: Switch to generic core MIPS: loongson: Add built-in DTB support MIPS: dts: loongson: Add CQ-T300B board MIPS: dts: loongson: Add Smartloong-1C board MIPS: dts: loongson: Add LSGZ_1B_DEV board MIPS: dts: loongson: Add LS1B-DEMO board dt-bindings: mips: loongson: Add LS1B-DEMO and CQ-T300B mips: lantiq: danube: rename stp node on EASY50712 reference board mips: lantiq: xway: sysctrl: rename stp clock MIPS: RB532: Replace deprecated strcpy() with memcpy() and strscpy() MIPS: Loongson64: Replace deprecated strcpy() with strscpy_pad() MIPS: generic: Replace deprecated strcpy() in ocelot_detect() MIPS: octeon: Replace deprecated strcpy() in octeon_model_get_string_buffer() MIPS: octeon: Replace memset(0) + deprecated strcpy() with strscpy_pad() MIPS: arc: Replace deprecated strcpy() with memcpy() MIPS: txx9: Replace deprecated strcpy() with strscpy() MIPS: sni: Replace deprecated strcpy() in sni_console_setup() ... |
||
|
Linus Torvalds
|
742adaa16d |
Merge tag 'for-linus' of https://github.com/openrisc/linux
Pull OpenRISC updates from Stafford Horne: "I picked up one series from Chen Miao, our Google Summer of Code contributor, which adds OpenRISC support for static keys" * tag 'for-linus' of https://github.com/openrisc/linux: openrisc: Add jump label support openrisc: Regenerate defconfigs. openrisc: Add R_OR1K_32_PCREL relocation type module support openrisc: Add text patching API support |
||
|
Linus Torvalds
|
21fbefc588 |
Merge tag 'trace-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing updates from Steven Rostedt: - Use READ_ONCE() and WRITE_ONCE() instead of RCU for syscall tracepoints Individual system call trace events are pseudo events attached to the raw_syscall trace events that just trace the entry and exit of all system calls. When any of these individual system call trace events get enabled, an element in an array indexed by the system call number is assigned to the trace file that defines how to trace it. When the trace event triggers, it reads this array and if the array has an element, it uses that trace file to know what to write it (the trace file defines the output format of the corresponding system call). The issue is that it uses rcu_dereference_ptr() and marks the elements of the array as using RCU. This is incorrect. There is no RCU synchronization here. The event file that is pointed to has a completely different way to make sure its freed properly. The reading of the array during the system call trace event is only to know if there is a value or not. If not, it does nothing (it means this system call isn't being traced). If it does, it uses the information to store the system call data. The RCU usage here can simply be replaced by READ_ONCE() and WRITE_ONCE() macros. - Have the system call trace events use "0x" for hex values Some system call trace events display hex values but do not have "0x" in front of it. Seeing "count: 44" can be assumed that it is 44 decimal when in actuality it is 44 hex (68 decimal). Display "0x44" instead. - Use vmalloc_array() in tracing_map_sort_entries() The function tracing_map_sort_entries() used array_size() and vmalloc() when it could have simply used vmalloc_array(). - Use for_each_online_cpu() in trace_osnoise.c() Instead of open coding for_each_cpu(cpu, cpu_online_mask), use for_each_online_cpu(). - Move the buffer field in struct trace_seq to the end The buffer field in struct trace_seq is architecture dependent in size, and caused padding for the fields after it. By moving the buffer to the end of the structure, it compacts the trace_seq structure better. - Remove redundant zeroing of cmdline_idx field in saved_cmdlines_buffer() The structure that contains cmdline_idx is zeroed by memset(), no need to explicitly zero any of its fields after that. - Use system_percpu_wq instead of system_wq in user_event_mm_remove() As system_wq is being deprecated, use the new wq. - Add cond_resched() is ftrace_module_enable() Some modules have a lot of functions (thousands of them), and the enabling of those functions can take some time. On non preemtable kernels, it was triggering a watchdog timeout. Add a cond_resched() to prevent that. - Add a BUILD_BUG_ON() to make sure PID_MAX_DEFAULT is always a power of 2 There's code that depends on PID_MAX_DEFAULT being a power of 2 or it will break. If in the future that changes, make sure the build fails to ensure that the code is fixed that depends on this. - Grab mutex_lock() before ever exiting s_start() The s_start() function is a seq_file start routine. As s_stop() is always called even if s_start() fails, and s_stop() expects the event_mutex to be held as it will always release it. That mutex must always be taken in s_start() even if that function fails. * tag 'trace-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix lock imbalance in s_start() memory allocation failure path tracing: Ensure optimized hashing works ftrace: Fix softlockup in ftrace_module_enable tracing: replace use of system_wq with system_percpu_wq tracing: Remove redundant 0 value initialization tracing: Move buffer in trace_seq to end of struct tracing/osnoise: Use for_each_online_cpu() instead of for_each_cpu() tracing: Use vmalloc_array() to improve code tracing: Have syscall trace events show "0x" for values greater than 10 tracing: Replace syscall RCU pointer assignment with READ/WRITE_ONCE() |
||
|
Linus Torvalds
|
d9f24f8e60 |
Merge tag 'trace-tools-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull tracing tools updates from Steven Rostedt - This is mostly just consolidating code between osnoise/timerlat and top/hist for easier maintenance and less future divergence * tag 'trace-tools-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tools/rtla: Add remaining support for osnoise actions tools/rtla: Add test engine support for unexpected output tools/rtla: Fix -A option name in test comment tools/rtla: Consolidate code between osnoise/timerlat and hist/top tools/rtla: Create common_apply_config() tools/rtla: Move top/hist params into common struct tools/rtla: Consolidate common parameters into shared structure |
||
|
Linus Torvalds
|
2cd14dff16 |
Merge tag 'probes-fixes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace
Pull probe fix from Masami Hiramatsu: - Fix race condition in kprobe initialization causing NULL pointer dereference. This happens on weak memory model, which does not correctly manage the flags access with appropriate memory barriers. Use RELEASE-ACQUIRE to fix it. * tag 'probes-fixes-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace: tracing: Fix race condition in kprobe initialization causing NULL pointer dereference |
||
|
Huacai Chen
|
032676ff82 |
LoongArch: Update Loongson-3 default config file
1. Increase NR_CPUS to 2048. 2. Enable KEXEC_FILE options. 3. Enable some EXT4/XFS options. 4. Enable Loongson PWM/MMC/BMC/SE drivers. 5. Enable simple DRM driver. 6. Enable some Intel ethernet drivers. 7. Enable some gpio drivers. 8. Enable some network options. 9. Enable SM3/SM4 cryptographic algorithms. Signed-off-by: Huacai Chen <chenhuacai@loongson.cn> |
||
|
Linus Torvalds
|
6093a688a0 |
Merge tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc
Pull Char/Misc/IIO/Binder updates from Greg KH:
"Here is the big set of char/misc/iio and other driver subsystem
changes for 6.18-rc1.
Loads of different stuff in here, it was a busy development cycle in
lots of different subsystems, with over 27k new lines added to the
tree.
Included in here are:
- IIO updates including new drivers, reworking of existing apis, and
other goodness in the sensor subsystems
- MEI driver updates and additions
- NVMEM driver updates
- slimbus removal for an unused driver and some other minor updates
- coresight driver updates and additions
- MHI driver updates
- comedi driver updates and fixes
- extcon driver updates
- interconnect driver additions
- eeprom driver updates and fixes
- minor UIO driver updates
- tiny W1 driver updates
But the majority of new code is in the rust bindings and additions,
which includes:
- misc driver rust binding updates for read/write support, we can now
write "normal" misc drivers in rust fully, and the sample driver
shows how this can be done.
- Initial framework for USB driver rust bindings, which are disabled
for now in the build, due to limited support, but coming in through
this tree due to dependencies on other rust binding changes that
were in here. I'll be enabling these back on in the build in the
usb.git tree after -rc1 is out so that developers can continue to
work on these in linux-next over the next development cycle.
- Android Binder driver implemented in Rust.
This is the big one, and was driving a huge majority of the rust
binding work over the past years. Right now there are two binder
drivers in the kernel, selected only at build time as to which one
to use as binder wants to be included in the system at boot time.
The binder C maintainers all agreed on this, as eventually, they
want the C code to be removed from the tree, but it will take a few
releases to get there while both are maintained to ensure that the
rust implementation is fully stable and compliant with the existing
userspace apis.
All of these have been in linux-next for a while"
* tag 'char-misc-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (320 commits)
rust: usb: keep usb::Device private for now
rust: usb: don't retain device context for the interface parent
USB: disable rust bindings from the build for now
samples: rust: add a USB driver sample
rust: usb: add basic USB abstractions
coresight: Add label sysfs node support
dt-bindings: arm: Add label in the coresight components
coresight: tnoc: add new AMBA ID to support Trace Noc V2
coresight: Fix incorrect handling for return value of devm_kzalloc
coresight: tpda: fix the logic to setup the element size
coresight: trbe: Return NULL pointer for allocation failures
coresight: Refactor runtime PM
coresight: Make clock sequence consistent
coresight: Refactor driver data allocation
coresight: Consolidate clock enabling
coresight: Avoid enable programming clock duplicately
coresight: Appropriately disable trace bus clocks
coresight: Appropriately disable programming clocks
coresight: etm4x: Support atclk
coresight: catu: Support atclk
...
|
||
|
Linus Torvalds
|
59697e061f |
Merge tag 'staging-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging
Pull staging driver updates from Greg KH: "Here is the 'big' set of staging driver changes for 6.18-rc1. Nothing really exciting in here they pretty much consist of: - minor coding style changes and cleanups - some api layer removals where not needed Overall a quiet development cycle. All have been in linux-next for a while with no reported issues" * tag 'staging-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (63 commits) staging: rtl8723bs: xmit: rephrase comment and drop extra space staging: sm750fb: rename camel case variable staging: rtl8723bs: hal: put return type and function name on one line staging: rtl8723bs: fix typo in comment staging: sm750fb: rename snake case variables staging: sm750fb: remove unnecessary volatile qualifiers staging: rtl8723bs: rtw_efuse.h: simplify copyright banner staging: rtl8723bs: remove unused tables staging: rtl8723bs: Hal_EfuseParseAntennaDiversity_8723B is empty staging: rtl8723bs: remove REG_EFUSE_ACCESS_8723 and EFUSE_ACCESS_ON_8723 staging: rtl8723bs: remove bWrite from Hal_EfusePowerSwitch staging: rtl8723bs: remove wrapper Efuse_PowerSwitch staging: octeon: Clean up dead code in ethernet-tx.c staging: rtl8723bs: fix fortify warnings by using struct_group staging: gpib: use int type to store negative error codes staging: rtl8723bs: remove include/recv_osdep.h staging: rtl8723bs: remove os_dep/recv_linux.c staging: rtl8723bs: rename rtw_os_recv_indicate_pkt staging: rtl8723bs: move rtw_os_recv_indicate_pkt to rtw_recv.c staging: rtl8723bs: rename rtw_os_alloc_msdu_pkt ... |
||
|
Linus Torvalds
|
c6006b8ca1 |
Merge tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and thunderbolt drivers for 6.18-rc1. It
was another normal development cycle, with lots of the usual drivers
getting updates:
- Thunderbolt driver cleanups and additions
- dwc3 driver updates
- dwc2 driver updates
- typec driver updates
- xhci driver updates and additions
- offload USB engine updates for better power management
- unused tracepoint removals
- usb gadget fixes and updates as more users start to rely on these
drivers instead of the "old" function gadget drivers
- new USB device ids
- other minor driver USB driver updates
- new USB I/O driver framework and driver additions"
The last item, the usb i/o driver, has an i2c and gpio driver added
through this tree. Those drivers were acked by the respective
subsystem maintainers.
All of these have been in linux-next for a while"
* tag 'usb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (132 commits)
usb: vhci-hcd: Prevent suspending virtually attached devices
USB: serial: option: add SIMCom 8230C compositions
thunderbolt: Fix use-after-free in tb_dp_dprx_work
usb: xhci: align PORTSC trace with one-based port numbering
usb: xhci: correct indentation for PORTSC tracing function
usb: xhci: improve TR Dequeue Pointer mask
usb: xhci-pci: add support for hosts with zero USB3 ports
usb: xhci: Update a comment about Stop Endpoint retries
Revert "usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running"
usb: gadget: f_rndis: Refactor bind path to use __free()
usb: gadget: f_ecm: Refactor bind path to use __free()
usb: gadget: f_acm: Refactor bind path to use __free()
usb: gadget: f_ncm: Refactor bind path to use __free()
usb: gadget: Introduce free_usb_request helper
usb: gadget: Store endpoint pointer in usb_request
usb: host: xhci-rcar: Add Renesas RZ/G3E USB3 Host driver support
usb: host: xhci-plat: Add .post_resume_quirk for struct xhci_plat_priv
usb: host: xhci-rcar: Move R-Car reg definitions
dt-bindings: usb: Document Renesas RZ/G3E USB3HOST
usb: gadget: f_fs: Fix epfile null pointer access after ep enable.
...
|
||
|
Linus Torvalds
|
5d2f4730bb |
Merge tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty
Pull tty/serial updates from Greg KH:
"Here are some small updates for tty/serial drivers for 6.18-rc1.
Not many changes overall, just the usual:
- abi cleanups and reworking of the tty functions by Jiri by adding
console lock guard logic
- 8250_platform driver updates
- qcom-geni driver updates
- other minor serial driver updates
- some more vt escape codes added
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (43 commits)
tty: serial: fix help message for SERIAL_CPM
serial: 8250: omap: Support wakeup pinctrl state on suspend
dt-bindings: serial: 8250_omap: Add wakeup pinctrl state
serial: max310x: improve interrupt handling
vt: move vc_saved_screen to within tty allocated judgment
Revert "m68k: make HPDCA and HPAPCI bools"
tty: remove redundant condition checks
tty/vt: Add missing return value for VT_RESIZE in vt_ioctl()
vt: remove redundant check on vc_mode in con_font_set()
serial: qcom-geni: Add DFS clock mode support to GENI UART driver
m68k: make HPDCA and HPAPCI bools
tty: n_gsm: Don't block input queue by waiting MSC
serial: qcom-geni: Fix off-by-one error in ida_alloc_range()
serdev: Drop dev_pm_domain_detach() call
serial: sc16is7xx: drop redundant conversion to bool
vt: add support for smput/rmput escape codes
serial: stm32: allow selecting console when the driver is module
serial: 8250_core: fix coding style issue
tty: serial: Modify the use of dev_err_probe()
s390/char/con3270: use tty_port_tty guard()
...
|
||
|
Linus Torvalds
|
cc07b0a3af |
Merge tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux
Pull MTD updates from Miquel Raynal:
"MTD core:
- Bad blocks increment is skipped if the block is already known bad
(improves user statistics relevance)
- Expose the OOB layout via debugfs
Raw NAND:
- Add support for Loongson-2K1000 and Loongson-2K0500 NAND
controllers, including extra features, such as chip select
and 6-byte NAND ID reading support
- Drop the s3c2410 driver
SPI NAND:
- Important SPI NAND continuous read improvements and fixes
- Add support for FudanMicro FM25S01A
- Add support for continuous reads in Gigadevice vendor driver
ECC:
- Add support for the Realtek ECC engine
SPI NOR:
- Some flashes can't perform reads or writes with start or end being
an odd number in Octal DTR mode. File systems like UBIFS can
request such reads or writes, causing the transaction to error out.
Pad the read or write transactions with extra bytes to avoid this
problem.
And the usual amount of various miscellaneous fixes"
* tag 'mtd/for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mtd/linux: (46 commits)
mtd: rawnand: sunxi: drop unused module alias
mtd: rawnand: stm32_fmc2: drop unused module alias
mtd: rawnand: rockchip: drop unused module alias
mtd: rawnand: pl353: drop unused module alias
mtd: rawnand: omap2: drop unused module alias
mtd: rawnand: atmel: drop unused module alias
mtd: onenand: omap2: drop unused module alias
mtd: hyperbus: hbmc-am654: drop unused module alias
mtd: jedec_probe: use struct_size() helper for cfiq allocation
mtd: cfi: use struct_size() helper for cfiq allocation
mtd: nand: raw: gpmi: fix clocks when CONFIG_PM=N
mtd: rawnand: omap2: fix device leak on probe failure
mtd: rawnand: atmel: Fix error handling path in atmel_nand_controller_add_nands
mtd: nand: realtek-ecc: Add Realtek external ECC engine support
dt-bindings: mtd: Add realtek,rtl9301-ecc
mtd: spinand: repeat reading in regular mode if continuous reading fails
mtd: spinand: try a regular dirmap if creating a dirmap for continuous reading fails
mtd: spinand: fix direct mapping creation sizes
mtd: rawnand: fsmc: Default to autodetect buswidth
mtd: nand: move nand_check_erased_ecc_chunk() to nand/core
...
|
||
|
Linus Torvalds
|
20f868da2c |
Merge tag 'rpmsg-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull rpmsg updates from Bjorn Andersson: - Clean up the dev_pm_domain integration in rpmsg core. Correct module aliases for the rpmsg char driver. - Transition Qualcomm SMD and GLINK drivers to strscpy() and fix the regression in legacy code for acquiring outgoing interrupts using the non-mailbox based mechanism. * tag 'rpmsg-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: rpmsg: qcom_smd: Fix fallback to qcom,ipc parse rpmsg: Use strscpy() instead of strscpy_pad() rpmsg: core: Drop dev_pm_domain_detach() call rpmsg: char: Export alias for RPMSG ID rpmsg-raw from table |
||
|
Linus Torvalds
|
c35f902cb3 |
Merge tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux
Pull remoteproc updates from Bjorn Andersson: - Enable coredump support for the i.MX HiFi core remoteproc, and clean up the i.MX remoteproc driver. - Introduce remoteprocs on the Qualcomm Milos platform. Gracefully shut own the ADSP remoteproc when bootloader has loaded the "Lite" firmware on X Elite. Improve the resource handover procedure to avoid possibly duplicate handling. - Transition the TI DA8xx, TI Keystone, and TI Wakeup M3 remoteproc drivers to handle resources using devres. * tag 'rproc-v6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux: (29 commits) remoteproc: pru: Fix potential NULL pointer dereference in pru_rproc_set_ctable() remoteproc: qcom: pas: Drop redundant assignment to ret remoteproc: qcom: pas: Shutdown lite ADSP DTB on X1E remoteproc: qcom: q6v5: Avoid handling handover twice remoteproc: qcom: q6v5: Avoid disabling handover IRQ twice remoteproc: qcom: pas: Add Milos remoteproc support dt-bindings: remoteproc: qcom,milos-pas: Document remoteprocs remoteproc: qcom_q6v5_mss: support loading MBN file on msm8974 remoteproc: imx_rproc: Clean up after ops introduction remoteproc: imx_rproc: Simplify IMX_RPROC_SMC switch case remoteproc: imx_rproc: Simplify IMX_RPROC_SCU_API switch case remoteproc: imx_rproc: Simplify IMX_RPROC_MMIO switch case remoteproc: imx_rproc: Move imx_rproc_dcfg closer to imx_rproc_of_match remoteproc: imx_rproc: Introduce start/stop/detect_mode ops for imx_rproc_dcfg remoteproc: k3: Correctly release some resources allocated in k3_rproc_request_mbox() remoteproc: wkup_m3: Use devm_rproc_add() helper remoteproc: wkup_m3: Use devm_rproc_alloc() helper remoteproc: wkup_m3: Use devm action to call PM runtime put sync remoteproc: wkup_m3: Use devm_pm_runtime_enable() helper remoteproc: keystone: Use devm_rproc_add() helper ... |
||
|
Linus Torvalds
|
54ba6d9b13 |
Merge tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid
Pull HID updates from Benjamin Tissoires:
- haptic touchpad support (Angela Czubak and Jonathan Denose)
- support for audio jack handling on DualSense Playstation controllers
(Cristian Ciocaltea)
- allow HID-BPF to rebind a driver to hid-multitouch (Benjamin
Tissoires)
- rework hidraw ioctls to make them safer (and tested) (Benjamin
Tissoires)
- various PIDFF and universal-PIDFF fixes/improvements (Tomasz Pakuła)
- better configuration of Intel QuickI2C through ACPI (Xinpeng Sun)
- other assorted cleanups and fixes
* tag 'hid-for-linus-2025093001' of git://git.kernel.org/pub/scm/linux/kernel/git/hid/hid: (58 commits)
HID: playstation: Switch to scoped_guard() in {dualsense|dualshock4}_output_worker()
HID: playstation: Silence sparse warnings for locking context imbalances
HID: playstation: Update SP preamp gain comment line
HID: intel-thc-hid: intel-quicki2c: support ACPI config for advanced features
HID: core: Change hid_driver to use a const char* for name
HID: hidraw: tighten ioctl command parsing
selftests/hid: hidraw: forge wrong ioctls and tests them
selftests/hid: hidraw: add more coverage for hidraw ioctls
selftests/hid: update vmtest.sh for virtme-ng
HID: playstation: Support DualSense audio jack event reporting
HID: playstation: Support DualSense audio jack hotplug detection
HID: playstation: Redefine DualSense input report status field
HID: playstation: Prefer kzalloc(sizeof(*buf)...)
HID: playstation: Document spinlock_t usage
HID: playstation: Fix all alignment and line length issues
HID: playstation: Correct spelling in comment sections
HID: playstation: Replace uint{32,16,8}_t with u{32,16,8}
HID: playstation: Simplify locking with guard() and scoped_guard()
HID: playstation: Add spaces around arithmetic operators
HID: playstation: Make use of bitfield macros
...
|
||
|
Linus Torvalds
|
b66451723c |
Merge tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86
Pull x86 platform driver updates from Ilpo Järvinen:
- amd/pmf:
- Add support for adjusting PMF PPT and PPT APU thresholds
- Extend custom BIOS inputs for more policies
- Update ta_pmf_action structure to the latest PMF TA
- arm64:
- thinkpad-t14s-ec: Add EC driver for ThinkPad T14s Gen6 Snapdragon
- int3472:
- Increase handshake GPIO delay
- intel/pmc:
- SSRAM support for Lunar Lake and Panther Lake
- Support reading substate requirements data from S0ix blockers
(for platforms starting from Panther Lake)
- Wildcat Lake support
- intel-uncore-freq:
- Solve duplicate sysfs entry warnings
- Present unique domain ID per package
- portwell-ec:
- Support suspend/resume
- Add hwmon support for voltage and temperature
- redmi-wmi:
- Add WMI driver for Redmibook keyboard
- think-lmi:
- Certificate support for ThinkCenter
- x86-android-tables + others:
- Convert away from legacy GPIO APIs
- x86-android-tables:
- Add support for Acer A1-840 tablet
- Fix modules list for Lenovo devices
- Stop using EPROBE_DEFER
- Miscellaneous cleanups / refactoring / improvements
* tag 'platform-drivers-x86-v6.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86: (63 commits)
platform/x86: pcengines-apuv2: Use static device properties
platform/x86: meraki-mx100: Use static device properties
platform/x86: barco-p50-gpio: use software nodes for gpio-leds/keys
platform/x86: x86-android-tablets: Stop using EPROBE_DEFER
platform/x86: x86-android-tablets: Fix modules lists for Lenovo devices
platform/x86: x86-android-tablets: Simplify lenovo_yoga_tab2_830_1050_exit()
platform/x86: x86-android-tablets: Add support for Acer A1-840 tablet
platform/x86: x86-android-tablets: Move Acer info to its own file
platform/x86: x86-android-tablets: Update my email address
platform/x86: x86-android-tablets: Simplify node-group [un]registration
platform/x86: x86-android-tablets: use swnode_group instead of manual registering
platform/x86: x86-android-tablets: replace bat_swnode with swnode_group
platform/x86: x86-android-tablets: convert gpio_keys devices to GPIO references
platform/x86: x86-android-tablets: remove support for GPIO lookup tables
platform/x86: x86-android-tablets: convert Yoga Tab2 fast charger to GPIO references
platform/x86: x86-android-tablets: convert HID-I2C devices to GPIO references
platform/x86: x86-android-tablets: convert wm1502 devices to GPIO references
platform/x86: x86-android-tablets: convert int3496 devices to GPIO references
platform/x86: x86-android-tablets: convert EDT devices to GPIO references
platform/x86: x86-android-tablets: convert Novatek devices to GPIO references
...
|
||
|
Linus Torvalds
|
b4e5bb5555 |
Merge tag 'keys-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd
Pull keys updates from Jarkko Sakkinen: "A few minor updates/fixes for keys" * tag 'keys-next-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/jarkko/linux-tpmdd: security: keys: use menuconfig for KEYS symbol KEYS: encrypted: Use SHA-256 library instead of crypto_shash KEYS: trusted_tpm1: Move private functionality out of public header KEYS: trusted_tpm1: Use SHA-1 library instead of crypto_shash KEYS: trusted_tpm1: Compare HMAC values in constant time |
||
|
Linus Torvalds
|
908057d185 |
Merge tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6
Pull crypto updates from Herbert Xu: "Drivers: - Add ciphertext hiding support to ccp - Add hashjoin, gather and UDMA data move features to hisilicon - Add lz4 and lz77_only to hisilicon - Add xilinx hwrng driver - Add ti driver with ecb/cbc aes support - Add ring buffer idle and command queue telemetry for GEN6 in qat Others: - Use rcu_dereference_all to stop false alarms in rhashtable - Fix CPU number wraparound in padata" * tag 'v6.18-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (78 commits) dt-bindings: rng: hisi-rng: convert to DT schema crypto: doc - Add explicit title heading to API docs hwrng: ks-sa - fix division by zero in ks_sa_rng_init KEYS: X.509: Fix Basic Constraints CA flag parsing crypto: anubis - simplify return statement in anubis_mod_init crypto: hisilicon/qm - set NULL to qm->debug.qm_diff_regs crypto: hisilicon/qm - clear all VF configurations in the hardware crypto: hisilicon - enable error reporting again crypto: hisilicon/qm - mask axi error before memory init crypto: hisilicon/qm - invalidate queues in use crypto: qat - Return pointer directly in adf_ctl_alloc_resources crypto: aspeed - Fix dma_unmap_sg() direction rhashtable: Use rcu_dereference_all and rcu_dereference_all_check crypto: comp - Use same definition of context alloc and free ops crypto: omap - convert from tasklet to BH workqueue crypto: qat - Replace kzalloc() + copy_from_user() with memdup_user() crypto: caam - double the entropy delay interval for retry padata: WQ_PERCPU added to alloc_workqueue users padata: replace use of system_unbound_wq with system_dfl_wq crypto: cryptd - WQ_PERCPU added to alloc_workqueue users ... |
||
|
Linus Torvalds
|
d104e3d17f |
Merge tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl
Pull CXL updates from Dave Jiang:
"The changes include adding poison injection support, fixing CXL access
coordinates when onlining CXL memory, and delaing the enumeration of
downstream switch ports for CXL hierarchy to ensure that the CXL link
is established at the time of enumeration to address a few issues
observed on AMD and Intel platforms.
Misc changes:
- Use str_plural() instead of open code for emitting strings.
- Use str_enabled_disabled() instead of ternary operator
- Fix emit of type resource_size_t argument for
validate_region_offset()
- Typo fixup in CXL driver-api documentation
- Rename CFMWS coherency restriction defines
- Add convention doc describe dealing with x86 low memory hole
and CXL
Poison Inject support:
- Move hpa_to_spa callback to new reoot decoder ops structure
- Define a SPA to HPA callback for interleave calculation with
XOR math
- Add support for SPA to DPA address translation with XOR
- Add locked variants of poison inject and clear functions
- Add inject and clear poison support by region offset
CXL access coordinates update fix:
- A comment update for hotplug memory callback prority defines
- Add node_update_perf_attrs() for updating perf attrs on a node
- Update cxl_access_coordinates() to use the new node update function
- Remove hmat_update_target_coordinates() and related code
CXL delayed downstream port enumeration and initialization:
- Add helper to detect top of CXL device topology and remove
open coding
- Add helper to delete single dport
- Add a cached copy of target_map to cxl_decoder
- Refactor decoder setup to reduce cxl_test burden
- Defer dport allocation for switch ports
- Add mock version of devm_cxl_add_dport_by_dev() for cxl_test
- Adjust the mock version of devm_cxl_switch_port_decoders_setup()
due to cxl core usage
- Setup target_map for cxl_test decoder initialization
- Change SSLBIS handler to handle single dport
- Move port register setup to when first dport appears"
* tag 'cxl-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (25 commits)
cxl: Move port register setup to when first dport appear
cxl: Change sslbis handler to only handle single dport
cxl/test: Setup target_map for cxl_test decoder initialization
cxl/test: Adjust the mock version of devm_cxl_switch_port_decoders_setup()
cxl/test: Add mock version of devm_cxl_add_dport_by_dev()
cxl: Defer dport allocation for switch ports
cxl/test: Refactor decoder setup to reduce cxl_test burden
cxl: Add a cached copy of target_map to cxl_decoder
cxl: Add helper to delete dport
cxl: Add helper to detect top of CXL device topology
cxl: Documentation/driver-api/cxl: Describe the x86 Low Memory Hole solution
cxl/acpi: Rename CFMW coherency restrictions
Documentation/driver-api: Fix typo error in cxl
acpi/hmat: Remove now unused hmat_update_target_coordinates()
cxl, acpi/hmat: Update CXL access coordinates directly instead of through HMAT
drivers/base/node: Add a helper function node_update_perf_attrs()
mm/memory_hotplug: Update comment for hotplug memory callback priorities
cxl: Fix emit of type resource_size_t argument for validate_region_offset()
cxl/region: Add inject and clear poison by region offset
cxl/core: Add locked variants of the poison inject and clear funcs
...
|
||
|
Linus Torvalds
|
67da125e30 |
Merge tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux
Pull RCU updates from Paul McKenney:
"Documentation updates:
- Update whatisRCU.rst and checklist.rst for recent RCU API additions
- Fix RCU documentation formatting and typos
- Replace dead Ottawa Linux Symposium links in RTFP.txt
Miscellaneous RCU updates:
- Document that rcu_barrier() hurries RCU_LAZY callbacks
- Remove redundant interrupt disabling from
rcu_preempt_deferred_qs_handler()
- Move list_for_each_rcu from list.h to rculist.h, and adjust the
include directive in kernel/cgroup/dmem.c accordingly
- Make initial set of changes to accommodate upcoming
system_percpu_wq changes
SRCU updates:
- Create an srcu_read_lock_fast_notrace() for eventual use in
tracing, including adding guards
- Document the reliance on per-CPU operations as implicit RCU readers
in __srcu_read_{,un}lock_fast()
- Document the srcu_flip() function's memory-barrier D's relationship
to SRCU-fast readers
- Remove a redundant preempt_disable() and preempt_enable() pair from
srcu_gp_start_if_needed()
Torture-test updates:
- Fix jitter.sh spin time so that it actually varies as advertised.
It is still quite coarse-grained, but at least it does now vary
- Update torture.sh help text to include the not-so-new --do-normal
parameter, which permits (for example) testing KCSAN kernels
without doing non-debug kernels
- Fix a number of false-positive diagnostics that were being
triggered by rcutorture starting before boot completed. Running
multiple near-CPU-bound rcutorture processes when there is only the
boot CPU is after all a bit excessive
- Substitute kcalloc() for kzalloc()
- Remove a redundant kfree() and NULL out kfree()ed objects"
* tag 'rcu.2025.09.26a' of git://git.kernel.org/pub/scm/linux/kernel/git/rcu/linux: (31 commits)
rcu: WQ_UNBOUND added to sync_wq workqueue
rcu: WQ_PERCPU added to alloc_workqueue users
rcu: replace use of system_wq with system_percpu_wq
refperf: Set reader_tasks to NULL after kfree()
refperf: Remove redundant kfree() after torture_stop_kthread()
srcu/tiny: Remove preempt_disable/enable() in srcu_gp_start_if_needed()
srcu: Document srcu_flip() memory-barrier D relation to SRCU-fast
srcu: Document __srcu_read_{,un}lock_fast() implicit RCU readers
rculist: move list_for_each_rcu() to where it belongs
refscale: Use kcalloc() instead of kzalloc()
rcutorture: Use kcalloc() instead of kzalloc()
docs: rcu: Replace multiple dead OLS links in RTFP.txt
doc: Fix typo in RCU's torture.rst documentation
Documentation: RCU: Retitle toctree index
Documentation: RCU: Reduce toctree depth
Documentation: RCU: Wrap kvm-remote.sh rerun snippet in literal code block
rcu: docs: Requirements.rst: Abide by conventions of kernel documentation
doc: Add RCU guards to checklist.rst
doc: Update whatisRCU.rst for recent RCU API additions
rcutorture: Delay forward-progress testing until boot completes
...
|
||
|
Linus Torvalds
|
48e3694ae7 |
Merge tag 'printk-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux
Pull printk updates from Petr Mladek: - Add KUnit test for the printk ring buffer - Fix the check of the maximal record size which is allowed to be stored into the printk ring buffer. It prevents corruptions of the ring buffer. Note that printk() is on the safe side. The messages are limited by 1kB buffer and are always small enough for the minimal log buffer size 4kB, see CONFIG_LOG_BUF_SHIFT definition. * tag 'printk-for-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/printk/linux: printk: ringbuffer: Fix data block max size check printk: kunit: support offstack cpumask printk: kunit: Fix __counted_by() in struct prbtest_rbdata printk: ringbuffer: Explain why the KUnit test ignores failed writes printk: ringbuffer: Add KUnit test |
||
|
Linus Torvalds
|
b41048485e |
Merge tag 'memblock-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock
Pull mm-init update from Mike Rapoport: "Simplify deferred initialization of struct pages Refactor and simplify deferred initialization of the memory map. Beside the negative diffstat it gives 3ms (55ms vs 58ms) reduction in the initialization of deferred pages on single node system with 64GiB of RAM" * tag 'memblock-v6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock: memblock: drop for_each_free_mem_pfn_range_in_zone_from() mm/mm_init: drop deferred_init_maxorder() mm/mm_init: deferred_init_memmap: use a job per zone mm/mm_init: use deferred_init_memmap_chunk() in deferred_grow_zone() |
||
|
Linus Torvalds
|
c4c8bcab18 |
Merge tag 'sparc-for-6.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc
Pull sparc updates from Andreas Larsson:
- Add relocation handling for R_SPARC_UA64 for sparc64 that is
generated by llvm and clarify printout on missing relocation handler
- Fix missing hugetlb tte initialization for sun4u
- Code cleanup for redundant use of __GPF_NOWARN for sparc64
- Fix prototypes of reads[bwl]() for sparc64 by adding missing const
and volatile pointer qualifiers
- Fix bugs in accurate exception reporting in multiple machine specific
sparc64 variants of copy_{from,to}_user() for sparc64
- Fix memory leak in error handling for sparc32
- Drop -ansi from asflags and replace __ASSEMBLY__ with __ASSEMBLER__
in headers for all arch/sparc
- Replace strcpy() with strscpy() for all arch/sparc
* tag 'sparc-for-6.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/alarsson/linux-sparc: (22 commits)
sparc: Replace deprecated strcpy() with strscpy() in handle_nextprop_quirks()
sparc64: Replace deprecated strcpy() with strscpy() in build_path_component()
sparc: Replace deprecated strcpy() with strscpy() in prom_32.c
sparc: Replace deprecated strcpy() with strscpy() in domain services driver
sparc64: Replace deprecated strcpy() with strscpy() in prom_nextprop()
sparc: floppy: Replace deprecated strcpy() with strscpy() in sun_floppy_init()
sparc: parport: Replace deprecated strcpy() with strscpy() in ecpp_probe()
sparc: PCI: Replace deprecated strcpy() with strscpy()
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in non-uapi headers
sparc: Replace __ASSEMBLY__ with __ASSEMBLER__ in uapi headers
sparc: Drop the "-ansi" from the asflags
sparc: fix error handling in scan_one_device()
sparc: fix accurate exception reporting in copy_{from,to}_user for M7
sparc: fix accurate exception reporting in copy_to_user for Niagara 4
sparc: fix accurate exception reporting in copy_{from_to}_user for Niagara
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC III
sparc: fix accurate exception reporting in copy_{from_to}_user for UltraSPARC
sparc64: fix prototypes of reads[bwl]()
sparc64: Remove redundant __GFP_NOWARN
sparc64: fix hugetlb for sun4u
...
|
||
|
Linus Torvalds
|
86bcf7be1e |
Merge tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux
Pull more RISC-V updates from Paul Walmsley:
- Support for the RISC-V-standardized RPMI interface.
RPMI is a platform management communication mechanism between OSes
running on application processors, and a remote platform management
processor. Similar to ARM SCMI, TI SCI, etc. This includes irqchip,
mailbox, and clk changes.
- Support for the RISC-V-standardized MPXY SBI extension.
MPXY is a RISC-V-specific standard implementing a shared memory
mailbox between S-mode operating systems (e.g., Linux) and M-mode
firmware (e.g., OpenSBI). It is part of this PR since one of its use
cases is to enable M-mode firmware to act as a single RPMI client for
all RPMI activity on a core (including S-mode RPMI activity).
Includes a mailbox driver.
- Some ACPI-related updates to enable the use of RPMI and MPXY.
- The addition of Linux-wide memcpy_{from,to}_le32() static inline
functions, for RPMI use.
- An ACPI Kconfig change to enable boot logos on any ACPI-using
architecture (including RISC-V)
- A RISC-V defconfig change to add GPIO keyboard and event device
support, for front panel shutdown or reboot buttons
* tag 'riscv-for-linus-6.18-mw2' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux: (26 commits)
clk: COMMON_CLK_RPMI should depend on RISCV
ACPI: support BGRT table on RISC-V
MAINTAINERS: Add entry for RISC-V RPMI and MPXY drivers
RISC-V: Enable GPIO keyboard and event device in RV64 defconfig
irqchip/riscv-rpmi-sysmsi: Add ACPI support
mailbox/riscv-sbi-mpxy: Add ACPI support
irqchip/irq-riscv-imsic-early: Export imsic_acpi_get_fwnode()
ACPI: RISC-V: Add RPMI System MSI to GSI mapping
ACPI: RISC-V: Add support to update gsi range
ACPI: RISC-V: Create interrupt controller list in sorted order
ACPI: scan: Update honor list for RPMI System MSI
ACPI: Add support for nargs_prop in acpi_fwnode_get_reference_args()
ACPI: property: Refactor acpi_fwnode_get_reference_args() to support nargs_prop
irqchip: Add driver for the RPMI system MSI service group
dt-bindings: Add RPMI system MSI interrupt controller bindings
dt-bindings: Add RPMI system MSI message proxy bindings
clk: Add clock driver for the RISC-V RPMI clock service group
dt-bindings: clock: Add RPMI clock service controller bindings
dt-bindings: clock: Add RPMI clock service message proxy bindings
mailbox: Add RISC-V SBI message proxy (MPXY) based mailbox driver
...
|
||
|
Linus Torvalds
|
7c738cb4ca |
Merge tag 'x86_entry_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 entry updates from Dave Hansen: "A pair of x86/entry updates. The FRED one adjusts the kernel to the latest spec. The spec change prevents attackers from abusing kernel entry points. The second one came about because of the LASS work[1]. It moves the vsyscall emulation code away from depending on X86_PF_INSTR which is not available on some CPUs. Those CPUs are pretty obscure these days, but this still seems like the right thing to do. It also makes this code consistent with some things that the LASS code is going to do. - Use RIP instead of X86_PF_INSTR for vsyscall emulation - Remove ENDBR64 from FRED entry points" Link: https://lore.kernel.org/lkml/20250620135325.3300848-1-kirill.shutemov@linux.intel.com/ [1] * tag 'x86_entry_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/fred: Remove ENDBR64 from FRED entry points x86/vsyscall: Do not require X86_PF_INSTR to emulate vsyscall |
||
|
Linus Torvalds
|
be786eba12 |
Merge tag 'x86_mm_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 mm update from Dave Hansen: "A single change to remove an open-coded TLB flush operation by using an existing helper. This came out of Rik van Riel's work to get the INVLPGB instruction working. - Change cpa_flush() to call flush_kernel_range() directly" * tag 'x86_mm_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Change cpa_flush() to call flush_kernel_range() directly |
||
|
Linus Torvalds
|
50ac57c3b1 |
Merge tag 'x86_tdx_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip
Pull x86 TDX updates from Dave Hansen:
"The biggest change here is making TDX and kexec play nicely together.
Before this, the memory encryption hardware (which doesn't respect
cache coherency) could write back old cachelines on top of data in the
new kernel, so kexec and TDX were made mutually exclusive. This
removes the limitation.
There is also some work to tighten up a hardware bug workaround and
some MAINTAINERS updates.
- Make TDX and kexec work together
- Skip TDX bug workaround when the bug is not present
- Update maintainers entries"
* tag 'x86_tdx_for_6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/virt/tdx: Use precalculated TDVPR page physical address
KVM/TDX: Explicitly do WBINVD when no more TDX SEAMCALLs
x86/virt/tdx: Update the kexec section in the TDX documentation
x86/virt/tdx: Remove the !KEXEC_CORE dependency
x86/kexec: Disable kexec/kdump on platforms with TDX partial write erratum
x86/virt/tdx: Mark memory cache state incoherent when making SEAMCALL
x86/sme: Use percpu boolean to control WBINVD during kexec
x86/kexec: Consolidate relocate_kernel() function parameters
x86/tdx: Skip clearing reclaimed pages unless X86_BUG_TDX_PW_MCE is present
x86/tdx: Tidy reset_pamt functions
x86/tdx: Eliminate duplicate code in tdx_clear_page()
MAINTAINERS: Add KVM mail list to the TDX entry
MAINTAINERS: Add Rick Edgecombe as a TDX reviewer
MAINTAINERS: Update the file list in the TDX entry.
|
||
|
Linus Torvalds
|
5b7ce93854 |
Merge tag 'kgdb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux
Pull kgdb updates from Daniel Thompson: "A collection of small cleanups this cycle. Thorsten Blum has replaced a number strcpy() calls with safer alternatives (fixing a pointer aliasing bug in the process). Colin Ian King has simplified things by removing some unreachable code" * tag 'kgdb-6.18-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/danielt/linux: kdb: remove redundant check for scancode 0xe0 kdb: Replace deprecated strcpy() with helper function in kdb_defcmd() kdb: Replace deprecated strcpy() with memcpy() in parse_grep() kdb: Replace deprecated strcpy() with memmove() in vkdb_printf() kdb: Replace deprecated strcpy() with memcpy() in kdb_strdup() kernel: debug: gdbstub: Replace deprecated strcpy() with strscpy() |
||
|
Linus Torvalds
|
f3826aa996 |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Pull kvm updates from Paolo Bonzini:
"This excludes the bulk of the x86 changes, which I will send
separately. They have two not complex but relatively unusual conflicts
so I will wait for other dust to settle.
guest_memfd:
- Add support for host userspace mapping of guest_memfd-backed memory
for VM types that do NOT use support KVM_MEMORY_ATTRIBUTE_PRIVATE
(which isn't precisely the same thing as CoCo VMs, since x86's
SEV-MEM and SEV-ES have no way to detect private vs. shared).
This lays the groundwork for removal of guest memory from the
kernel direct map, as well as for limited mmap() for
guest_memfd-backed memory.
For more information see:
- commit
|
||
|
Linus Torvalds
|
bf897d2626 |
Merge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Pull virtio updates from Michael Tsirkin:
"Just fixes and cleanups this time around. The mapping cleanups are
preparing the ground for new features, though"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
virtio-vdpa: Drop redundant conversion to bool
vduse: Use fixed 4KB bounce pages for non-4KB page size
vduse: switch to use virtio map API instead of DMA API
vdpa: introduce map ops
vdpa: support virtio_map
virtio: introduce map ops in virtio core
virtio_ring: rename dma_handle to map_handle
virtio: introduce virtio_map container union
virtio: rename dma helpers
virtio_ring: switch to use dma_{map|unmap}_page()
virtio_ring: constify virtqueue pointer for DMA helpers
virtio_balloon: Remove redundant __GFP_NOWARN
vhost: vringh: Fix copy_to_iter return value check
vhost: vringh: Modify the return value check
|
||
|
Linus Torvalds
|
55a42f78ff |
Merge tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio
Pull VFIO updates from Alex Williamson:
- Use fdinfo to expose the sysfs path of a device represented by a vfio
device file (Alex Mastro)
- Mark vfio-fsl-mc, vfio-amba, and the reset functions for
vfio-platform for removal as these are either orphaned or believed to
be unused (Alex Williamson)
- Add reviewers for vfio-platform to save it from also being marked for
removal (Mostafa Saleh, Pranjal Shrivastava)
- VFIO selftests, including basic sanity testing and minimal userspace
drivers for testing against real hardware. This is also expected to
provide integration with KVM selftests for KVM-VFIO interfaces (David
Matlack, Josh Hilke)
- Fix drivers/cdx and vfio/cdx to build without CONFIG_GENERIC_MSI_IRQ
(Nipun Gupta)
- Fix reference leak in hisi_acc (Miaoqian Lin)
- Use consistent return for unsupported device feature (Alex Mastro)
- Unwind using the correct memory free callback in vfio/pds (Zilin
Guan)
- Use IRQ_DISABLE_LAZY flag to improve handling of pre-PCI2.3 INTx and
resolve stalled interrupt on ppc64 (Timothy Pearson)
- Enable GB300 in nvgrace-gpu vfio-pci variant driver (Tushar Dave)
- Misc:
- Drop unnecessary ternary conversion in vfio/pci (Xichao Zhao)
- Grammatical fix in nvgrace-gpu (Morduan Zang)
- Update Shameer's email address (Shameer Kolothum)
- Fix document build warning (Alex Williamson)
* tag 'vfio-v6.18-rc1' of https://github.com/awilliam/linux-vfio: (48 commits)
vfio/nvgrace-gpu: Add GB300 SKU to the devid table
vfio/pci: Fix INTx handling on legacy non-PCI 2.3 devices
vfio/pds: replace bitmap_free with vfree
vfio: return -ENOTTY for unsupported device feature
hisi_acc_vfio_pci: Fix reference leak in hisi_acc_vfio_debug_init
vfio/platform: Mark reset drivers for removal
vfio/amba: Mark for removal
MAINTAINERS: Add myself as VFIO-platform reviewer
MAINTAINERS: Add myself as VFIO-platform reviewer
docs: proc.rst: Fix VFIO Device title formatting
vfio: selftests: Fix .gitignore for already tracked files
vfio/cdx: update driver to build without CONFIG_GENERIC_MSI_IRQ
cdx: don't select CONFIG_GENERIC_MSI_IRQ
MAINTAINERS: Update Shameer Kolothum's email address
vfio: selftests: Add a script to help with running VFIO selftests
vfio: selftests: Make iommufd the default iommu_mode
vfio: selftests: Add iommufd mode
vfio: selftests: Add iommufd_compat_type1{,v2} modes
vfio: selftests: Add vfio_type1v2_mode
vfio: selftests: Replicate tests across all iommu_modes
...
|
||
|
Randy Dunlap
|
8be70a8fc6 |
security: keys: use menuconfig for KEYS symbol
Give the KEYS kconfig symbol and its associated symbols a separate menu space under Security options by using "menuconfig" instead of "config". This also makes it easier to find the security and LSM options. Signed-off-by: Randy Dunlap <rdunlap@infradead.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Eric Biggers
|
9b8d24a49f |
KEYS: encrypted: Use SHA-256 library instead of crypto_shash
Instead of the "sha256" crypto_shash, just use sha256(). Similarly, instead of the "hmac(sha256)" crypto_shash, just use hmac_sha256_usingrawkey(). This is simpler and faster. Signed-off-by: Eric Biggers <ebiggers@kernel.org> Reviewed-by: Jarkko Sakkinen <jarkko@kernel.org> Reviewed-by: Mimi Zohar <zohar@linux.ibm.com> Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org> |
||
|
Linus Torvalds
|
cbf33b8e0b |
Merge tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Pull bpf fixes from Alexei Starovoitov: - Fix selftests/bpf (typo, conflicts) and unbreak BPF CI (Jiri Olsa) - Remove linux/unaligned.h dependency for libbpf_sha256 (Andrii Nakryiko) and add a test (Eric Biggers) - Reject negative offsets for ALU operations in the verifier (Yazhou Tang) and add a test (Eduard Zingerman) - Skip scalar adjustment for BPF_NEG operation if destination register is a pointer (Brahmajit Das) and add a test (KaFai Wan) * tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: libbpf: Fix missing #pragma in libbpf_utils.c selftests/bpf: Add tests for rejection of ALU ops with negative offsets selftests/bpf: Add test for libbpf_sha256() bpf: Reject negative offsets for ALU ops libbpf: remove linux/unaligned.h dependency for libbpf_sha256() libbpf: move libbpf_sha256() implementation into libbpf_utils.c libbpf: move libbpf_errstr() into libbpf_utils.c libbpf: remove unused libbpf_strerror_r and STRERR_BUFSIZE libbpf: make libbpf_errno.c into more generic libbpf_utils.c selftests/bpf: Add test for BPF_NEG alu on CONST_PTR_TO_MAP bpf: Skip scalar adjustment for BPF_NEG if dst is a pointer selftests/bpf: Fix realloc size in bpf_get_addrs selftests/bpf: Fix typo in subtest_basic_usdt after merge conflict selftests/bpf: Fix open-coded gettid syscall in uprobe syscall tests |
||
|
Linus Torvalds
|
d955299b5c |
Merge tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc
Pull SoC build fix from Arnd Bergmann: "One commit for the dt bindings was missing from the dt branch, this one is already pending in the clk tree that contains the corresponding device driver" * tag 'soc-fixes-6.18' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: dt-bindings: clock: Add ARTPEC-8 clock controller |
||
|
Linus Torvalds
|
674b0ddb75 |
Merge tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi
Pull SCSI updates from James Bottomley: "Usual driver updates (ufs, mpi3mr, lpfc, pm80xx, mpt3sas) plus assorted cleanups and fixes. The only core update is to sd.c and is mostly cosmetic" * tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (105 commits) scsi: MAINTAINERS: Update FC element owners scsi: mpt3sas: Update driver version to 54.100.00.00 scsi: mpt3sas: Add support for 22.5 Gbps SAS link rate scsi: mpt3sas: Suppress unnecessary IOCLogInfo on CONFIG_INVALID_PAGE scsi: mpt3sas: Fix crash in transport port remove by using ioc_info() scsi: ufs: ufs-qcom: Add support for limiting HS gear and rate scsi: ufs: pltfrm: Add DT support to limit HS gear and gear rate scsi: ufs: ufs-qcom: Remove redundant re-assignment to hs_rate scsi: ufs: dt-bindings: Document gear and rate limit properties scsi: ufs: core: Fix data race in CPU latency PM QoS request handling scsi: libfc: Fix potential buffer overflow in fc_ct_ms_fill() scsi: storvsc: Remove redundant ternary operators scsi: ufs: core: Change MCQ interrupt enable flow scsi: smartpqi: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Replace kmalloc() + copy_from_user() with memdup_user() scsi: hpsa: Fix potential memory leak in hpsa_big_passthru_ioctl() scsi: lpfc: Copyright updates for 14.4.0.11 patches scsi: lpfc: Update lpfc version to 14.4.0.11 scsi: lpfc: Convert debugfs directory counts from atomic to unsigned int scsi: lpfc: Clean up extraneous phba dentries ... |
||
|
Linus Torvalds
|
7dbec0bbc3 |
Merge tag 'for-6.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm
Pull device mapper updates from Mikulas Patocka: - a new dm-pcache target for read/write caching on persistent memory - fix typos in docs - misc small refactoring - mark dm-error with DM_TARGET_PASSES_INTEGRITY - dm-request-based: fix NULL pointer dereference and quiesce_depth out of sync - dm-linear: optimize REQ_PREFLUSH - dm-vdo: return error on corrupted metadata - dm-integrity: support asynchronous hash interface * tag 'for-6.18/dm-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/device-mapper/linux-dm: (27 commits) dm raid: use proper md_ro_state enumerators dm-integrity: prefer synchronous hash interface dm-integrity: enable asynchronous hash interface dm-integrity: rename internal_hash dm-integrity: add the "offset" argument dm-integrity: allocate the recalculate buffer with kmalloc dm-integrity: introduce integrity_kmap and integrity_kunmap dm-integrity: replace bvec_kmap_local with kmap_local_page dm-integrity: use internal variable for digestsize dm vdo: return error on corrupted metadata in start_restoring_volume functions dm vdo: Update code to use mem_is_zero dm: optimize REQ_PREFLUSH with data when using the linear target dm-pcache: use int type to store negative error codes dm: fix "writen"->"written" dm-pcache: cleanup: fix coding style report by checkpatch.pl dm-pcache: remove ctrl_lock for pcache_cache_segment dm: fix NULL pointer dereference in __dm_suspend() dm: fix queue start/stop imbalance under suspend/load/resume races dm-pcache: add persistent cache target in device-mapper dm error: mark as DM_TARGET_PASSES_INTEGRITY ... |
||
|
Linus Torvalds
|
2ccb4d203f |
Merge tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma
Pull rdma updates from Jason Gunthorpe:
"A new Pensando ionic driver, a new Gen 3 HW support for Intel irdma,
and lots of small bnxt_re improvements.
- Small bug fixes and improves to hfi1, efa, mlx5, erdma, rdmarvt,
siw
- Allow userspace access to IB service records through the rdmacm
- Optimize dma mapping for erdma
- Fix shutdown of the GSI QP in mana
- Support relaxed ordering MR and fix a corruption bug with mlx5 DMA
Data Direct
- Many improvement to bnxt_re:
- Debugging features and counters
- Improve performance of some commands
- Change flow_label reporting in completions
- Mirror vnic
- RDMA flow support
- New RDMA driver for Pensando Ethernet devices: ionic
- Gen 3 hardware support for the Intel irdma driver
- Fix rdma routing resolution with VRFs"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rdma/rdma: (85 commits)
RDMA/ionic: Fix memory leak of admin q_wr
RDMA/siw: Always report immediate post SQ errors
RDMA/bnxt_re: improve clarity in ALLOC_PAGE handler
RDMA/irdma: Remove unused struct irdma_cq fields
RDMA/irdma: Fix positive vs negative error codes in irdma_post_send()
RDMA/bnxt_re: Remove non-statistics counters from hw_counters
RDMA/bnxt_re: Add debugfs info entry for device and resource information
RDMA/bnxt_re: Fix incorrect errno used in function comments
RDMA: Use %pe format specifier for error pointers
RDMA/ionic: Use ether_addr_copy instead of memcpy
RDMA/ionic: Fix build failure on SPARC due to xchg() operand size
RDMA/rxe: Fix race in do_task() when draining
IB/sa: Fix sa_local_svc_timeout_ms read race
IB/ipoib: Ignore L3 master device
RDMA/core: Use route entry flag to decide on loopback traffic
RDMA/core: Resolve MAC of next-hop device without ARP support
RDMA/core: Squash a single user static function
RDMA/irdma: Update Kconfig
RDMA/irdma: Extend CQE Error and Flush Handling for GEN3 Devices
RDMA/irdma: Add Atomic Operations support
...
|