Commit 7c32f7a2d3db ("selftests: net: py: don't default to shell=True")
changed the cmd() helper to avoid spawning a shell unless explicitly
requested.
The devlink_rate_tc_bw test enables SR-IOV by writing to the
sriov_numvfs sysfs attribute using redirection. Without shell=True the
redirection is not interpreted and the VF device never appears,
causing the test to fail.
Fix by explicitly passing shell=True in the two places that update
sriov_numvfs.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-5-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
GenerateTraffic was added to spin up long-running iperf3 load, mainly
to drive high PPS background traffic. It was never meant to provide
stable throughput numbers, and trying to repurpose it for measurement
does not make sense.
Introduce Iperf3Runner to allow tests to split out server/client
configuration, control start/stop, and collect JSON output for
analysis. This makes it possible to measure bandwidth directly when
validating egress shaping.
GenerateTraffic stays as the background load generator, reusing the
common iperf3 helpers under the hood.
Signed-off-by: Carolina Jubran <cjubran@nvidia.com>
Reviewed-by: Cosmin Ratiu <cratiu@nvidia.com>
Reviewed-by: Nimrod Oren <noren@nvidia.com>
Link: https://patch.msgid.link/20251130091938.4109055-3-cjubran@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
This removes some noise that can be distracting while looking at
selftests by redirecting socat stderr to /dev/null.
Before this commit, netcons_basic would output:
Running with target mode: basic (ipv6)
2025/11/29 12:08:03 socat[259] W exiting on signal 15
2025/11/29 12:08:03 socat[271] W exiting on signal 15
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
2025/11/29 12:08:05 socat[329] W exiting on signal 15
2025/11/29 12:08:05 socat[322] W exiting on signal 15
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[386] W exiting on signal 15
2025/11/29 12:08:08 socat[380] W exiting on signal 15
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
2025/11/29 12:08:10 socat[440] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
2025/11/29 12:08:10 socat[435] W exiting on signal 15
extended : ipv4 : Test passed
After these changes, output looks like:
Running with target mode: basic (ipv6)
basic : ipv6 : Test passed
Running with target mode: basic (ipv4)
basic : ipv4 : Test passed
Running with target mode: extended (ipv6)
extended : ipv6 : Test passed
Running with target mode: extended (ipv4)
extended : ipv4 : Test passed
Signed-off-by: Andre Carvalho <asantostc@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20251129-netcons-socat-noise-v1-1-605a0cea8fca@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
New NIPA installation had been reporting a few flaky tests.
arp_ndisc_evict_nocarrier is most flaky of them all.
I suspect that the flakiness is due to udev swapping the MAC
addresses on the interfaces. Extend the message in
arp_ndisc_evict_nocarrier to hint at this potential issue.
Having the neigh get fail right after ping is rather unusual,
unless udev changes the MAC addr causing a flush in the meantime.
Link: https://patch.msgid.link/20251127194556.2409574-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull pidfd and coredump updates from Christian Brauner:
"Features:
- Expose coredump signal via pidfd
Expose the signal that caused the coredump through the pidfd
interface. The recent changes to rework coredump handling to rely
on unix sockets are in the process of being used in systemd. The
previous systemd coredump container interface requires the coredump
file descriptor and basic information including the signal number
to be sent to the container. This means the signal number needs to
be available before sending the coredump to the container.
- Add supported_mask field to pidfd
Add a new supported_mask field to struct pidfd_info that indicates
which information fields are supported by the running kernel. This
allows userspace to detect feature availability without relying on
error codes or kernel version checks.
Cleanups:
- Drop struct pidfs_exit_info and prepare to drop exit_info pointer,
simplifying the internal publication mechanism for exit and
coredump information retrievable via the pidfd ioctl
- Use guard() for task_lock in pidfs
- Reduce wait_pidfd lock scope
- Add missing PIDFD_INFO_SIZE_VER1 constant
- Add missing BUILD_BUG_ON() assert on struct pidfd_info
Fixes:
- Fix PIDFD_INFO_COREDUMP handling
Selftests:
- Split out coredump socket tests and common helpers into separate
files for better organization
- Fix userspace coredump client detection issues
- Handle edge-triggered epoll correctly
- Ignore ENOSPC errors in tests
- Add debug logging to coredump socket tests, socket protocol tests,
and test helpers
- Add tests for PIDFD_INFO_COREDUMP_SIGNAL
- Add tests for supported_mask field
- Update pidfd header for selftests"
* tag 'vfs-6.19-rc1.coredump' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (23 commits)
pidfs: reduce wait_pidfd lock scope
selftests/coredump: add second PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: add first PIDFD_INFO_COREDUMP_SIGNAL test
selftests/coredump: ignore ENOSPC errors
selftests/coredump: add debug logging to coredump socket protocol tests
selftests/coredump: add debug logging to coredump socket tests
selftests/coredump: add debug logging to test helpers
selftests/coredump: handle edge-triggered epoll correctly
selftests/coredump: fix userspace coredump client detection
selftests/coredump: fix userspace client detection
selftests/coredump: split out coredump socket tests
selftests/coredump: split out common helpers
selftests/pidfd: add second supported_mask test
selftests/pidfd: add first supported_mask test
selftests/pidfd: update pidfd header
pidfs: expose coredump signal
pidfs: drop struct pidfs_exit_info
pidfs: prepare to drop exit_info pointer
pidfd: add a new supported_mask field
pidfs: add missing BUILD_BUG_ON() assert on struct pidfd_info
...
Pull namespace updates from Christian Brauner:
"This contains substantial namespace infrastructure changes including a new
system call, active reference counting, and extensive header cleanups.
The branch depends on the shared kbuild branch for -fms-extensions support.
Features:
- listns() system call
Add a new listns() system call that allows userspace to iterate
through namespaces in the system. This provides a programmatic
interface to discover and inspect namespaces, addressing
longstanding limitations:
Currently, there is no direct way for userspace to enumerate
namespaces. Applications must resort to scanning /proc/*/ns/ across
all processes, which is:
- Inefficient - requires iterating over all processes
- Incomplete - misses namespaces not attached to any running
process but kept alive by file descriptors, bind mounts, or
parent references
- Permission-heavy - requires access to /proc for many processes
- No ordering or ownership information
- No filtering per namespace type
The listns() system call solves these problems:
ssize_t listns(const struct ns_id_req *req, u64 *ns_ids,
size_t nr_ns_ids, unsigned int flags);
struct ns_id_req {
__u32 size;
__u32 spare;
__u64 ns_id;
struct /* listns */ {
__u32 ns_type;
__u32 spare2;
__u64 user_ns_id;
};
};
Features include:
- Pagination support for large namespace sets
- Filtering by namespace type (MNT_NS, NET_NS, USER_NS, etc.)
- Filtering by owning user namespace
- Permission checks respecting namespace isolation
- Active Reference Counting
Introduce an active reference count that tracks namespace
visibility to userspace. A namespace is visible in the following
cases:
- The namespace is in use by a task
- The namespace is persisted through a VFS object (namespace file
descriptor or bind-mount)
- The namespace is a hierarchical type and is the parent of child
namespaces
The active reference count does not regulate lifetime (that's still
done by the normal reference count) - it only regulates visibility
to namespace file handles and listns().
This prevents resurrection of namespaces that are pinned only for
internal kernel reasons (e.g., user namespaces held by
file->f_cred, lazy TLB references on idle CPUs, etc.) which should
not be accessible via (1)-(3).
- Unified Namespace Tree
Introduce a unified tree structure for all namespaces with:
- Fixed IDs assigned to initial namespaces
- Lookup based solely on inode number
- Maintained list of owned namespaces per user namespace
- Simplified rbtree comparison helpers
Cleanups
- Header Reorganization:
- Move namespace types into separate header (ns_common_types.h)
- Decouple nstree from ns_common header
- Move nstree types into separate header
- Switch to new ns_tree_{node,root} structures with helper functions
- Use guards for ns_tree_lock
- Initial Namespace Reference Count Optimization
- Make all reference counts on initial namespaces a nop to avoid
pointless cacheline ping-pong for namespaces that can never go
away
- Drop custom reference count initialization for initial namespaces
- Add NS_COMMON_INIT() macro and use it for all namespaces
- pid: rely on common reference count behavior
- Miscellaneous Cleanups
- Rename exit_task_namespaces() to exit_nsproxy_namespaces()
- Rename is_initial_namespace() and make argument const
- Use boolean to indicate anonymous mount namespace
- Simplify owner list iteration in nstree
- nsfs: raise SB_I_NODEV, SB_I_NOEXEC, and DCACHE_DONTCACHE explicitly
- nsfs: use inode_just_drop()
- pidfs: raise DCACHE_DONTCACHE explicitly
- pidfs: simplify PIDFD_GET__NAMESPACE ioctls
- libfs: allow to specify s_d_flags
- cgroup: add cgroup namespace to tree after owner is set
- nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
Fixes:
- setns(pidfd, ...) race condition
Fix a subtle race when using pidfds with setns(). When the target
task exits after prepare_nsset() but before commit_nsset(), the
namespace's active reference count might have been dropped. If
setns() then installs the namespaces, it would bump the active
reference count from zero without taking the required reference on
the owner namespace, leading to underflow when later decremented.
The fix resurrects the ownership chain if necessary - if the caller
succeeded in grabbing passive references, the setns() should
succeed even if the target task exits or gets reaped.
- Return EFAULT on put_user() error instead of success
- Make sure references are dropped outside of RCU lock (some
namespaces like mount namespace sleep when putting the last
reference)
- Don't skip active reference count initialization for network
namespace
- Add asserts for active refcount underflow
- Add asserts for initial namespace reference counts (both passive
and active)
- ipc: enable is_ns_init_id() assertions
- Fix kernel-doc comments for internal nstree functions
- Selftests
- 15 active reference count tests
- 9 listns() functionality tests
- 7 listns() permission tests
- 12 inactive namespace resurrection tests
- 3 threaded active reference count tests
- commit_creds() active reference tests
- Pagination and stress tests
- EFAULT handling test
- nsid tests fixes"
* tag 'namespace-6.19-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vfs/vfs: (103 commits)
pidfs: simplify PIDFD_GET_<type>_NAMESPACE ioctls
nstree: fix kernel-doc comments for internal functions
nsproxy: fix free_nsproxy() and simplify create_new_namespaces()
selftests/namespaces: fix nsid tests
ns: drop custom reference count initialization for initial namespaces
pid: rely on common reference count behavior
ns: add asserts for initial namespace active reference counts
ns: add asserts for initial namespace reference counts
ns: make all reference counts on initial namespace a nop
ipc: enable is_ns_init_id() assertions
fs: use boolean to indicate anonymous mount namespace
ns: rename is_initial_namespace()
ns: make is_initial_namespace() argument const
nstree: use guards for ns_tree_lock
nstree: simplify owner list iteration
nstree: switch to new structures
nstree: add helper to operate on struct ns_tree_{node,root}
nstree: move nstree types into separate header
nstree: decouple from ns_common header
ns: move namespace types into separate header
...
* kvm-arm64/nv-xnx-haf: (22 commits)
: Support for FEAT_XNX and FEAT_HAF in nested
:
: Add support for a couple of MMU-related features that weren't
: implemented by KVM's software page table walk:
:
: - FEAT_XNX: Allows the hypervisor to describe execute permissions
: separately for EL0 and EL1
:
: - FEAT_HAF: Hardware update of the Access Flag, which in the context of
: nested means software walkers must also set the Access Flag.
:
: The series also adds some basic support for testing KVM's emulation of
: the AT instruction, including the implementation detail that AT sets the
: Access Flag in KVM.
KVM: arm64: at: Update AF on software walk only if VM has FEAT_HAFDBS
KVM: arm64: at: Use correct HA bit in TCR_EL2 when regime is EL2
KVM: arm64: Document KVM_PGTABLE_PROT_{UX,PX}
KVM: arm64: Fix spelling mistake "Unexpeced" -> "Unexpected"
KVM: arm64: Add break to default case in kvm_pgtable_stage2_pte_prot()
KVM: arm64: Add endian casting to kvm_swap_s[12]_desc()
KVM: arm64: Fix compilation when CONFIG_ARM64_USE_LSE_ATOMICS=n
KVM: arm64: selftests: Add test for AT emulation
KVM: arm64: nv: Expose hardware access flag management to NV guests
KVM: arm64: nv: Implement HW access flag management in stage-2 SW PTW
KVM: arm64: Implement HW access flag management in stage-1 SW PTW
KVM: arm64: Propagate PTW errors up to AT emulation
KVM: arm64: Add helper for swapping guest descriptor
KVM: arm64: nv: Use pgtable definitions in stage-2 walk
KVM: arm64: Handle endianness in read helper for emulated PTW
KVM: arm64: nv: Stop passing vCPU through void ptr in S2 PTW
KVM: arm64: Call helper for reading descriptors directly
KVM: arm64: nv: Advertise support for FEAT_XNX
KVM: arm64: Teach ptdump about FEAT_XNX permissions
KVM: arm64: nv: Forward FEAT_XNX permissions to the shadow stage-2
...
Signed-off-by: Oliver Upton <oupton@kernel.org>
* kvm-arm64/vgic-lr-overflow: (50 commits)
: Support for VGIC LR overflows, courtesy of Marc Zyngier
:
: Address deficiencies in KVM's GIC emulation when a vCPU has more active
: IRQs than can be represented in the VGIC list registers. Sort the AP
: list to prioritize inactive and pending IRQs, potentially spilling
: active IRQs outside of the LRs.
:
: Handle deactivation of IRQs outside of the LRs for both EOImode=0/1,
: which involves special consideration for SPIs being deactivated from a
: different vCPU than the one that acked it.
KVM: arm64: Convert ICH_HCR_EL2_TDIR cap to EARLY_LOCAL_CPU_FEATURE
KVM: arm64: selftests: vgic_irq: Add timer deactivation test
KVM: arm64: selftests: vgic_irq: Add Group-0 enable test
KVM: arm64: selftests: vgic_irq: Add asymmetric SPI deaectivation test
KVM: arm64: selftests: vgic_irq: Perform EOImode==1 deactivation in ack order
KVM: arm64: selftests: vgic_irq: Remove LR-bound limitation
KVM: arm64: selftests: vgic_irq: Exclude timer-controlled interrupts
KVM: arm64: selftests: vgic_irq: Change configuration before enabling interrupt
KVM: arm64: selftests: vgic_irq: Fix GUEST_ASSERT_IAR_EMPTY() helper
KVM: arm64: selftests: gic_v3: Disable Group-0 interrupts by default
KVM: arm64: selftests: gic_v3: Add irq group setting helper
KVM: arm64: GICv2: Always trap GICV_DIR register
KVM: arm64: GICv2: Handle deactivation via GICV_DIR traps
KVM: arm64: GICv2: Handle LR overflow when EOImode==0
KVM: arm64: GICv3: Force exit to sync ICH_HCR_EL2.En
KVM: arm64: GICv3: nv: Plug L1 LR sync into deactivation primitive
KVM: arm64: GICv3: nv: Resync LRs/VMCR/HCR early for better MI emulation
KVM: arm64: GICv3: Avoid broadcast kick on CPUs lacking TDIR
KVM: arm64: GICv3: Handle in-LR deactivation when possible
KVM: arm64: GICv3: Add SPI tracking to handle asymmetric deactivation
...
Signed-off-by: Oliver Upton <oupton@kernel.org>
* kvm-arm64/sea-user:
: Userspace handling of SEAs, courtesy of Jiaqi Yan
:
: Add support for processing external aborts in userspace in situations
: where the host has failed to do so, allowing the VMM to potentially
: reinject an external abort into the VM.
Documentation: kvm: new UAPI for handling SEA
KVM: selftests: Test for KVM_EXIT_ARM_SEA
KVM: arm64: VM exit to userspace to handle SEA
Signed-off-by: Oliver Upton <oupton@kernel.org>
- In order to prepare the layout for nohz_full work deferral to
user exit, the context tracking state must shrink the counter
of transitions to/from RCU not watching. The only possible hazard
is to trigger wrap-around more easily, delaying a bit grace periods
when that happens. This should be a rare event though. Yet add
debugging and torture code to test that assumption.
- Fix memory leak on locktorture module
- Annotate accesses in rculist_nulls.h to prevent from KCSAN warnings.
On recent discussions, we also concluded that all those WRITE_ONCE()
and READ_ONCE() on list APIs deserve appropriate comments. Something
to be expected for the next cycle.
- Provide a script to apply several configs to several commits with torture.
- Allow torture to reuse a build directory in order to save needless
rebuild time.
- Various cleanups.
Patch series "initial work on making VMA flags a bitmap", v3.
We are in the rather silly situation that we are running out of VMA flags
as they are currently limited to a system word in size.
This leads to absurd situations where we limit features to 64-bit
architectures only because we simply do not have the ability to add a flag
for 32-bit ones.
This is very constraining and leads to hacks or, in the worst case, simply
an inability to implement features we want for entirely arbitrary reasons.
This also of course gives us something of a Y2K type situation in mm where
we might eventually exhaust all of the VMA flags even on 64-bit systems.
This series lays the groundwork for getting away from this limitation by
establishing VMA flags as a bitmap whose size we can increase in future
beyond 64 bits if required.
This is necessarily a highly iterative process given the extensive use of
VMA flags throughout the kernel, so we start by performing basic steps.
Firstly, we declare VMA flags by bit number rather than by value,
retaining the VM_xxx fields but in terms of these newly introduced
VMA_xxx_BIT fields.
While we are here, we use sparse annotations to ensure that, when dealing
with VMA bit number parameters, we cannot be passed values which are not
declared as such - providing some useful type safety.
We then introduce an opaque VMA flag type, much like the opaque mm_struct
flag type introduced in commit bb6525f2f8 ("mm: add bitmap mm->flags
field"), which we establish in union with vma->vm_flags (but still set at
system word size meaning there is no functional or data type size change).
We update the vm_flags_xxx() helpers to use this new bitmap, introducing
sensible helpers to do so.
This series lays the foundation for further work to expand the use of
bitmap VMA flags and eventually eliminate these arbitrary restrictions.
This patch (of 4):
In order to lay the groundwork for VMA flags being a bitmap rather than a
system word in size, we need to be able to consistently refer to VMA flags
by bit number rather than value.
Take this opportunity to do so in an enum which we which is additionally
useful for tooling to extract metadata from.
This additionally makes it very clear which bits are being used for what
at a glance.
We use the VMA_ prefix for the bit values as it is logical to do so since
these reference VMAs. We consistently suffix with _BIT to make it clear
what the values refer to.
We declare bit values even when the flags that use them would not be
enabled by config options as this is simply clearer and clearly defines
what bit numbers are used for what, at no additional cost.
We declare a sparse-bitwise type vma_flag_t which ensures that users can't
pass around invalid VMA flags by accident and prepares for future work
towards VMA flags being a bitmap where we want to ensure bit values are
type safe.
To make life easier, we declare some macro helpers - DECLARE_VMA_BIT()
allows us to avoid duplication in the enum bit number declarations (and
maintaining the sparse __bitwise attribute), and INIT_VM_FLAG() is used to
assist with declaration of flags.
Unfortunately we can't declare both in the enum, as we run into issue with
logic in the kernel requiring that flags are preprocessor definitions, and
additionally we cannot have a macro which declares another macro so we
must define each flag macro directly.
Additionally, update the VMA userland testing vma_internal.h header to
include these changes.
We also have to fix the parameters to the vma_flag_*_atomic() functions
since VMA_MAYBE_GUARD_BIT is now of type vma_flag_t and sparse will
complain otherwise.
We have to update some rather silly if-deffery found in mm/task_mmu.c
which would otherwise break.
Finally, we update the rust binding helper as now it cannot auto-detect
the flags at all.
Link: https://lkml.kernel.org/r/cover.1764064556.git.lorenzo.stoakes@oracle.com
Link: https://lkml.kernel.org/r/3a35e5a0bcfa00e84af24cbafc0653e74deda64a.1764064556.git.lorenzo.stoakes@oracle.com
Signed-off-by: Lorenzo Stoakes <lorenzo.stoakes@oracle.com>
Acked-by: Vlastimil Babka <vbabka@suse.cz>
Reviewed-by: Pedro Falcato <pfalcato@suse.de>
Acked-by: Alice Ryhl <aliceryhl@google.com> [rust]
Cc: Alex Gaynor <alex.gaynor@gmail.com>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Andreas Hindborg <a.hindborg@kernel.org>
Cc: Axel Rasmussen <axelrasmussen@google.com>
Cc: Baolin Wang <baolin.wang@linux.alibaba.com>
Cc: Baoquan He <bhe@redhat.com>
Cc: Barry Song <baohua@kernel.org>
Cc: Ben Segall <bsegall@google.com>
Cc: Björn Roy Baron <bjorn3_gh@protonmail.com>
Cc: Boqun Feng <boqun.feng@gmail.com>
Cc: Byungchul Park <byungchul@sk.com>
Cc: Chengming Zhou <chengming.zhou@linux.dev>
Cc: Chris Li <chrisl@kernel.org>
Cc: Danilo Krummrich <dakr@kernel.org>
Cc: David Hildenbrand <david@redhat.com>
Cc: David Rientjes <rientjes@google.com>
Cc: Dev Jain <dev.jain@arm.com>
Cc: Dietmar Eggemann <dietmar.eggemann@arm.com>
Cc: Gary Guo <gary@garyguo.net>
Cc: Gregory Price <gourry@gourry.net>
Cc: "Huang, Ying" <ying.huang@linux.alibaba.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jann Horn <jannh@google.com>
Cc: Jason Gunthorpe <jgg@ziepe.ca>
Cc: Johannes Weiner <hannes@cmpxchg.org>
Cc: John Hubbard <jhubbard@nvidia.com>
Cc: Joshua Hahn <joshua.hahnjy@gmail.com>
Cc: Juri Lelli <juri.lelli@redhat.com>
Cc: Kairui Song <kasong@tencent.com>
Cc: Kees Cook <kees@kernel.org>
Cc: Kemeng Shi <shikemeng@huaweicloud.com>
Cc: Lance Yang <lance.yang@linux.dev>
Cc: Leon Romanovsky <leon@kernel.org>
Cc: Liam Howlett <liam.howlett@oracle.com>
Cc: Mathew Brost <matthew.brost@intel.com>
Cc: Matthew Wilcox (Oracle) <willy@infradead.org>
Cc: Mel Gorman <mgorman <mgorman@suse.de>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Miguel Ojeda <ojeda@kernel.org>
Cc: Mike Rapoport <rppt@kernel.org>
Cc: Muchun Song <muchun.song@linux.dev>
Cc: Nhat Pham <nphamcs@gmail.com>
Cc: Nico Pache <npache@redhat.com>
Cc: Oscar Salvador <osalvador@suse.de>
Cc: Peter Xu <peterx@redhat.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Qi Zheng <zhengqi.arch@bytedance.com>
Cc: Rakie Kim <rakie.kim@sk.com>
Cc: Rik van Riel <riel@surriel.com>
Cc: Ryan Roberts <ryan.roberts@arm.com>
Cc: Shakeel Butt <shakeel.butt@linux.dev>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Suren Baghdasaryan <surenb@google.com>
Cc: Trevor Gross <tmgross@umich.edu>
Cc: Valentin Schneider <vschneid@redhat.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Wei Xu <weixugc@google.com>
Cc: xu xin <xu.xin16@zte.com.cn>
Cc: Yuanchu Xie <yuanchu@google.com>
Cc: Zi Yan <ziy@nvidia.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
test_tc_edt currently defines the target rate in both the userspace and
BPF parts. This value could be defined once in the userspace part if we
make it able to configure the BPF program before starting the test.
Add a target_rate variable in the BPF part, and make the userspace part
set it to the desired rate before attaching the shaping program.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-4-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
test_tc_edt.sh uses a pair of veth and a BPF program attached to the TX
veth to shape the traffic to 5MBps. It then checks that the amount of
received bytes (at interface level), compared to the TX duration, indeed
matches 5Mbps.
Convert this test script to the test_progs framework:
- keep the double veth setup, isolated in two veths
- run a small tcp server, and connect client to server
- push a pre-configured amount of bytes, and measure how much time has
been needed to push those
- ensure that this rate is in a 2% error margin around the target rate
This two percent value, while being tight, is hopefully large enough to
not make the test too flaky in CI, while also turning it into a small
example of BPF-based shaping.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-2-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The test_tc_edt BPF program uses a custom section name, which works fine
when manually loading it with tc, but prevents it from being loaded with
libbpf.
Update the program section name to "tc" to be able to manipulate it with
a libbpf-based C test.
Signed-off-by: Alexis Lothoré (eBPF Foundation) <alexis.lothore@bootlin.com>
Link: https://lore.kernel.org/r/20251128-tc_edt-v2-1-26db48373e73@bootlin.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Jakub reported increased flakiness in bond_macvlan_ipvlan.sh on regular
kernel, while the tests consistently pass on a debug kernel. This suggests
a timing-sensitive issue.
To mitigate this, introduce a short sleep before each xvlan_over_bond
connectivity check. The delay helps ensure neighbor and route cache
have fully converged before verifying connectivity.
The sleep interval is kept minimal since check_connection() is invoked
nearly 100 times during the test.
Fixes: 246af950b9 ("selftests: bonding: add macvlan over bond testing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Closes: https://lore.kernel.org/netdev/20251114082014.750edfad@kernel.org
Signed-off-by: Hangbin Liu <liuhangbin@gmail.com>
Link: https://patch.msgid.link/20251127143310.47740-1-liuhangbin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
runqslower was added in commit 9c01546d26 "tools/bpf: Add runqslower
tool to tools/bpf" as a BCC port to showcase early BPF CO-RE + libbpf
workflows. runqslower continues to live in BCC (libbpf-tools), so there
is no need to keep building and maintaining it.
Drop tools/bpf/runqslower and remove all build hooks in tools/bpf and
selftests accordingly.
Signed-off-by: Hoyeon Lee <hoyeon.lee@suse.com>
Link: https://lore.kernel.org/r/20251126093821.373291-1-hoyeon.lee@suse.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Add a new VFIO selftest for measuring the time it takes to run
vfio_pci_device_init() in parallel for one or more devices.
This test serves as manual regression test for the performance
improvement of commit e908f58b6b ("vfio/pci: Separate SR-IOV VF
dev_set"). For example, when running this test with 64 VFs under the
same PF:
Before:
$ ./vfio_pci_device_init_perf_test -r vfio_pci_device_init_perf_test.iommufd.init 0000:1a:00.0 0000:1a:00.1 ...
...
Wall time: 6.653234463s
Min init time (per device): 0.101215344s
Max init time (per device): 6.652755941s
Avg init time (per device): 3.377609608s
After:
$ ./vfio_pci_device_init_perf_test -r vfio_pci_device_init_perf_test.iommufd.init 0000:1a:00.0 0000:1a:00.1 ...
...
Wall time: 0.122978332s
Min init time (per device): 0.108121915s
Max init time (per device): 0.122762761s
Avg init time (per device): 0.113816748s
This test does not make any assertions about performance, since any such
assertion is likely to be flaky due to system differences and random
noise. However this test can be fed into automation to detect
regressions, and can be used by developers in the future to measure
performance optimizations.
Suggested-by: Aaron Lewis <aaronlewis@google.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-19-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split out the contents of libvfio.h into separate header files, but keep
libvfio.h as the top-level include that all tests can use.
Put all new header files into a libvfio/ subdirectory to avoid future
name conflicts in include paths when libvfio is used by other selftests
like KVM.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-17-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Drop the struct vfio_pci_device wrappers for IOMMU map/unmap functions
and require tests to directly call iommu_map(), iommu_unmap(), etc. This
results in more concise code, and also makes it clear the map operations
are happening on a struct iommu, not necessarily on a specific device,
especially when multi-device tests are introduced.
Do the same for iova_allocator_init() as that function only needs the
struct iommu, not struct vfio_pci_device.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-14-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move the IOVA allocator into its own file, to provide better separation
between the allocator and the struct vfio_pci_device helper code.
The allocator could go into iommu.c, but it is standalone enough that a
separate file seems cleaner. This also continues the trend of having a
.c for every major object in VFIO selftests (vfio_pci_device.c,
vfio_pci_driver.c, iommu.c, and now iova_allocator.c).
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-13-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Rename struct vfio_dma_region to dma_region. This is in preparation for
separating the VFIO PCI device library code from the IOMMU library code.
This name change also better reflects the fact that DMA mappings can be
managed by either VFIO or IOMMUFD. i.e. the "vfio_" prefix is
misleading.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-11-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Upgrade various logging in the VFIO selftests drivers from dev_info() to
dev_err(). All of these logs indicate scenarios that may be unexpected.
For example, the logging during probing indicates matching devices but
that aren't supported by the driver. And the memcpy errors can indicate
a problem if the caller was not trying to do something like exercise I/O
fault handling. Exercising I/O fault handling is certainly a valid thing
to do, but the driver can't infer the caller's expectations, so better
to just log with dev_err().
Suggested-by: Raghavendra Rao Ananta <rananta@google.com>
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-10-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Eliminate overly chatty logs that are printed during almost every test.
These logs are adding more noise than value. If a test cares about this
information it can log it itself. This is especially true as the VFIO
selftests gains support for multiple devices in a single test (which
multiplies all these logs).
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-8-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Support tests that want to add multiple devices to the same
container/iommufd by decoupling struct vfio_pci_device from
struct iommu.
Multi-devices tests can now put multiple devices in the same
container/iommufd like so:
iommu = iommu_init(iommu_mode);
device1 = vfio_pci_device_init(bdf1, iommu);
device2 = vfio_pci_device_init(bdf2, iommu);
device3 = vfio_pci_device_init(bdf3, iommu);
...
vfio_pci_device_cleanup(device3);
vfio_pci_device_cleanup(device2);
vfio_pci_device_cleanup(device1);
iommu_cleanup(iommu);
To account for the new separation of vfio_pci_device and iommu, update
existing tests to initialize and cleanup a struct iommu.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-7-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Add support for passing multiple device BDFs to a test via the command
line. This is a prerequisite for multi-device tests.
Single-device tests can continue using vfio_selftests_get_bdf(), which
will continue to return argv[argc - 1] (if it is a BDF string), or the
environment variable $VFIO_SELFTESTS_BDF otherwise.
For multi-device tests, a new helper called vfio_selftests_get_bdfs() is
introduced which will return an array of all BDFs found at the end of
argv[], as well as the number of BDFs found (passed back to the caller
via argument). The array of BDFs returned does not need to be freed by
the caller.
The environment variable VFIO_SELFTESTS_BDF continues to support only a
single BDF for the time being.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-4-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Split run.sh into separate scripts (setup.sh, run.sh, cleanup.sh) to
enable multi-device testing, and prepare for VFIO selftests
automatically detecting which devices to use for testing by storing
device metadata on the filesystem.
- setup.sh takes one or more BDFs as arguments and sets up each device.
Metadata about each device is stored on the filesystem in the
directory:
${TMPDIR:-/tmp}/vfio-selftests-devices
Within this directory is a directory for each BDF, and then files in
those directories that cleanup.sh uses to cleanup the device.
- run.sh runs a selftest by passing it the BDFs of all set up devices.
- cleanup.sh takes zero or more BDFs as arguments and cleans up each
device. If no BDFs are provided, it cleans up all devices.
This split enables multi-device testing by allowing multiple BDFs to be
set up and passed into tests:
For example:
$ tools/testing/selftests/vfio/scripts/setup.sh <BDF1> <BDF2>
$ tools/testing/selftests/vfio/scripts/setup.sh <BDF3>
$ tools/testing/selftests/vfio/scripts/run.sh echo
<BDF1> <BDF2> <BDF3>
$ tools/testing/selftests/vfio/scripts/cleanup.sh
In the future, VFIO selftests can automatically detect set up devices by
inspecting ${TMPDIR:-/tmp}/vfio-selftests-devices. This will avoid the
need for the run.sh script.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-3-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Move run.sh in a new sub-directory scripts/. This directory will be used
to house various helper scripts to be used by humans and automation for
running VFIO selftests.
Opportunistically also switch run.sh from TEST_PROGS_EXTENDED to
TEST_FILES. The former is for actual test executables that are just not
run by default. TEST_FILES is a better fit for helper scripts.
No functional change intended.
Reviewed-by: Alex Mastro <amastro@fb.com>
Tested-by: Alex Mastro <amastro@fb.com>
Reviewed-by: Raghavendra Rao Ananta <rananta@google.com>
Signed-off-by: David Matlack <dmatlack@google.com>
Link: https://lore.kernel.org/r/20251126231733.3302983-2-dmatlack@google.com
Signed-off-by: Alex Williamson <alex@shazbot.org>
Test disconnected directories with two test suites
(layout4_disconnected_leafs and layout5_disconnected_branch) and 43
variants to cover the main corner cases.
These tests are complementary to the previous commit.
Add test_renameat() and test_exchangeat() helpers.
Test coverage for security/landlock is 92.1% of 1927 lines according to
LLVM 20.
Cc: Günther Noack <gnoack@google.com>
Cc: Song Liu <song@kernel.org>
Cc: Tingmao Wang <m@maowtm.org>
Link: https://lore.kernel.org/r/20251128172200.760753-5-mic@digikod.net
Signed-off-by: Mickaël Salaün <mic@digikod.net>
