Several vendor drivers have a requirement to send a synchronous raw HCI
reset with HCI_INIT_TIMEOUT.
Add a dedicated __hci_reset_sync() for them to use.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
'struct btusb_data' ideally should not include vendor specific
fields, but it currently includes the QCA devcoredump member
'struct qca_dump_info qca_dump'.
Fix by moving it into hci_dev private area accessed by hci_get_priv().
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Devcoredump is not enabled for ATH3012 or QCA_ROME, but they
unconditionally populate devcoredump fields in btusb_setup_qca().
Fix by populating devcoredump fields only when BTUSB_QCA_WCN6855 is
set, which marks the first generation of QCA BT SoCs for which
devcoredump is enabled.
Fixes: 20981ce2d5 ("Bluetooth: btusb: Add WCN6855 devcoredump support")
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add @match_id to btusb_data to record the matched usb_device_id
which will be used later.
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
qca_set_bdaddr() waits for HCI_EV_VENDOR when sending
EDL_WRITE_BD_ADDR_OPCODE (0xFC14), but the controller responds with
Command Complete event as confirmed by btmon on WCN7850:
< HCI Command: Vendor (0x3f|0x0014) plen 6 #3 [hci0]
11 22 33 44 55 66
> HCI Event: Command Complete (0x0e) plen 4 #4 [hci0]
Vendor (0x3f|0x0014) ncmd 1
Status: Success (0x00)
Fix by passing 0 as the event parameter to __hci_cmd_sync_ev() to
wait for the command complete event instead.
Fixes: 5c0a1001c8 ("Bluetooth: hci_qca: Add helper to set device address")
Reviewed-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Signed-off-by: Zijun Hu <zijun.hu@oss.qualcomm.com>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
hci_cmd_sync_dequeue_once() had a single in-tree caller,
hci_cancel_connect_sync(), which now holds cmd_sync_work_lock across the
in-flight create flag test and the dequeue and so open-codes the lookup
and cancel under that lock. That leaves the exported
hci_cmd_sync_dequeue_once() with no in-tree user, so remove it along with
its declaration.
Signed-off-by: Siwei Zhang <oss@fourdim.xyz>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Simplify 'force_no_mitm_write()' by using the convenient
'kstrtobool_from_user()'.
Signed-off-by: Dmitry Antipov <dmantipov@yandex.ru>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Enable compiler context analysis for Bluetooth subsystem and drivers.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
Don't check complex conn->lock usage in l2cap_sock_shutdown(). The
analysis cannot know that chan->conn pointer is never replaced by a
different l2cap_conn.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
compiler-context-analysis.h doesn't have tools to deal with the
conditional SRCU locking on return value used here, so just disable the
analysis in places instead of refactoring, in order to not make code
changes here.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Add minimal compiler context analysis annotations, required for
compilation to pass.
Signed-off-by: Pauli Virtanen <pav@iki.fi>
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
Johannes Berg says:
====================
Quite a bunch more work, of note:
- iwlwifi: new FW version support
- mt76:
- mt7928 support
- mt7925 NAN support
- mt7996 AP powersave improvements
- rtw89:
- LED support
- RTL8922DE support
- dual-BT coex for RTL8922D
- ath12k: AHB platform MultiPD support
- cfg80211: pre-assign cookies for operations
- mac80211: AQL support for multicast
* tag 'wireless-next-2026-08-06' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (403 commits)
wifi: nxpwifi: bound uAP association event IEs to the event buffer
wifi: nxpwifi: detach sync command buffer on interrupted wait
wifi: brcmfmac: Fix memory leak in brcmf_sdio_read_control()
wifi: rsi: Fix types to appease CFI
wifi: mac80211: skip default WMM setup for AP_VLAN links
wifi: nxpwifi: fix multiple static analysis errors and warnings
wifi: morsemicro: MM81X should be invisible and selected by its users
wifi: nxp: NXPWIFI should be invisible and selected by its users
wifi: cfg80211: stop PMSR before P2P and NAN teardown
wifi: mac80211: disconnect on CSA to channel 0
wifi: brcmfmac: fix P2P action frame handling without device vif
wifi: brcmfmac: Set DMA direction for msgbuf packet IDs
wifi: brcmfmac: validate msgbuf flowring IDs before use
wifi: mac80211: fix RCU usage in peer probing
wifi: mac80211: fix RCU dereference in throughput estimate
wifi: wilc1000: validate monitor transmit frame headers
wifi: mac80211: skip unused probe response countdown offsets
wifi: zd1211rw: reject secondary interfaces to prevent conflicts
wifi: nl80211: clean up color-change beacon data on errors
wifi: mac80211: send TWT teardown to peer after setup TX failure
...
====================
Link: https://patch.msgid.link/20260806121304.190084-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter.
Looks like our attempt to keep the PRs smaller have only prevented
this one from getting even bigger. In the last 9 days there were
405 postings explicitly tagged with [PATCH net], vs 687 with [PATCH
net-next]. 37% of posted patches being fixes is pretty crazy, and
that's likely undercounting because LLM "researchers" more often post
fixes without knowing to tag the patches for specific trees. I don't
have historic data.
In any case, we keep adjusting the criteria. The next PR will be
smaller.
Current release - regressions:
- net: defer netdev KOBJ_ADD uevent until the device is published,
previously rtnl_lock would serialize the accesses vs publishing
- net: explicitly cancel work to avoid races with ref tracker exit
- qrtr: ns: raise lookup limit to 128
- eth: hns3: fix speed configuration residue after driver reload
Previous releases - regressions:
- tcp: do not change rcv_ssthresh in tcp_measure_rcv_mss(), regressed
flows with MSS and scaling_ratio variability
- Revert "net: thunderbolt: Enable end-to-end flow control also in
transmit", broke some platforms (no packets coming thru)
- eth: stmmac: resume PHY before hardware setup when opening the
interface
Previous releases - always broken:
- another pile of fixes for less common protocols (SCTP, TLS, SMC
etc.)
- close a couple of AF_PACKET bugs and ways it can build skbs
problematic for the rest of the stack
- bridge: mrp: fix uninitialised bytes on the wire
- net: devmem: prevent net-iov / page mixing, avoid crashes
- eth: atlantic: free RX pages of consumed but not refilled buffers"
* tag 'net-7.2-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (116 commits)
igc: fix netdev not re-attached after resume if interface is down
tls: don't abort the connection on signal-interrupted sends
net: avoid theoretical races with ref drain
net: Defer netdev KOBJ_ADD uevent until the device is published
MAINTAINERS: dpll: zl3073x: replace Prathosh Satish with Min Li
sctp: clear control chunk transport if it is being removed
net/atm: fix slab-out-of-bounds read in vcc_setsockopt()
s390/ism: Fix UAF of sba and ieq during ism_dev_exit()
packet: use consistent hard_header_len in TX_RING send path
packet: use consistent hard_header_len in non-ring send paths
net: remove CAP_SYS_RAWIO zero-padding in dev_validate_header
bnge: Fix resource leak in bnge_init_nic() error path
ptp: ocp: Fix board ID over-read
tls: rx: restore msg_iter before TLS 1.3 optimistic retry
selftests: tls: add a test for splicing onto a full plaintext record
tls: don't leave a full plaintext sk_msg ring unpushed
xdp: reject clones that overrun skb_shared_info tailroom
mptcp: reclaim forward-allocated memory on RX path errors
mptcp: fastopen: only mark MPTFO subflows with SYN data
mptcp: pm: fix memory leak from alloc-during-teardown race
...
BPF_SOCK_OPS_RWND_INIT lets a sockops BPF program pick the initial TCP
receive window, e.g. to advertise a larger window up front in environments
where that is known to be safe. Today it is only effective for the passive
(listener) side; on the active (connect) side the value is computed and
then silently discarded.
On the passive path tcp_openreq_init_rwin() inflates full_space when the
program returns a non-zero window, so tcp_select_initial_window() can offer
it:
else if (full_space < (u64)rcv_wnd * mss)
full_space = min_t(u64, (u64)rcv_wnd * mss, INT_MAX);
tcp_select_initial_window() only clamps the requested window *down* to the
available space, so without inflating the space first the BPF reply can
never raise the offered window above tcp_full_space(sk).
tcp_connect_init() calls tcp_rwnd_init_bpf() but never inflates full_space,
so on connect() the requested window is clamped back to tcp_full_space(sk)
(~64KB at the default rcvbuf) and the program's value is ignored.
Inflate full_space in tcp_connect_init() as well; tp->advmss is the mss the
listener path uses (both are tcp_mss_clamp(tp, dst_metric_advmss(dst))).
Read full_space after tcp_rwnd_init_bpf() so a program that also adjusts
SO_RCVBUF is still reflected. Compute the inflated value in u64 and clamp
to INT_MAX to avoid overflow (full_space is int, rcv_wnd is u32), and
apply the same overflow fix to the existing listener-side computation.
tcp_select_initial_window() itself also computes init_rcv_wnd * mss in
32-bit when clamping the offered window down to the requested value. A
large requested window (init_rcv_wnd greater than ~2.9M segments at
1460 mss) wraps this multiply and collapses the offered window to a tiny
value, so compute it in u64 as well.
Signed-off-by: Tejas Birajdar <tejasbirajdar@meta.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260730220055.2946171-1-tejasbirajdar@meta.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
__igc_resume() calls netif_device_attach() only inside the
netif_running() branch, so an interface that was down during suspend
is never re-attached on resume. It then stays in the not-present state
that __igc_shutdown() set via netif_device_detach(): ethtool reports
ENODEV and every attempt to bring the interface up fails the
netif_device_present() check in __dev_open() with -ENODEV, silently,
since __igc_resume() returns 0. Only reloading the driver recovers the
device.
This is easy to hit in practice because NetworkManager brings managed
interfaces down before sleep unless Wake-on-LAN is configured, making
the adapter unusable after every suspend/resume cycle with WoL
disabled.
Re-attach the netdev on every successful resume, as igb and e1000e do.
Fixes: 6f31d6b643 ("igc: Refactor runtime power management flow")
Cc: stable@vger.kernel.org
Signed-off-by: Philipp David <pd-lkml@3b.pm>
Reviewed-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Dima Ruinskiy <dima.ruinskiy@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Link: https://patch.msgid.link/20260804222205.1580328-11-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When a signal interrupts a blocking send, tls_tx_records() treats the
resulting -ERESTARTSYS as a transmission failure and marks the socket
errored via tls_err_abort() with the raw error code. Later syscalls
return the kernel-internal errno 512 (ERESTARTSYS) to userspace, as the
signal it stems from is no longer pending during syscall exit and thus
never translated.
An interrupted send is not a connection error: the partially sent record
stays queued and is resent later. Interrupt error codes are therefore
excluded from the abort in the same way as -EAGAIN.
Fixes: b341ca51d2 ("tls: Fix tls_sw_sendmsg error handling")
Signed-off-by: Maximilian Immanuel Brandtner <maxbr@linux.ibm.com>
Link: https://patch.msgid.link/20260805063109.1772314-1-maxbr@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Technically, it's illegal to take a ref on a netdev just because
we have a pointer on which we already hold a ref, with no other
protection. This is because our simple per-cpu refcount
implementation cannot atomically read the count.
Let's make sure we cancel outstanding work and never queue more
work for a device we know is dead. This way taking a ref on
a dev we know is on the netdev_work_list is always going to be safe.
Jiangshan Yi reports that the issues is caught by ref tracker infra
leading to a warning:
WARNING: lib/ref_tracker.c:322 at ref_tracker_free
WARNING: lib/ref_tracker.c:246 at ref_tracker_dir_exit
Reported-by: Jiangshan Yi <yijiangshan@kylinos.cn>
Link: https://lore.kernel.org/20260731035135.3917308-2-yijiangshan@kylinos.cn
Fixes: 12c765be84 ("net: turn the rx_mode work into a generic netdev_work facility")
Link: https://patch.msgid.link/20260806022821.2079945-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdev_register_kobject() calls device_add(), which emits KOBJ_ADD and
wakes udev, but register_netdevice() only makes the device findable by
name later, in list_netdevice(). A udev worker that reacts to the uevent
can therefore run against a device that no lookup can find yet.
This used to be harmless because the ethtool ioctl took the rtnl_lock
when looking the device up, and register_netdevice() runs under rtnl, so
the worker simply blocked until registration finished. The commit in the
fixes tag moved the lookup out from under rtnl for ops-locked drivers.
Now there is a short window in register_netdevice() between
netdev_register_kobject() until list_netdevice() when the device is not
findable by name.
This was reproduced with the mlx5 driver on a kernel with KASAN enabled
during devlink reload: systemd-udevd's net_driver builtin gets -ENODEV
from ETHTOOL_GDRVINFO, which was preventing interface renaming.
Suppress the uevent in netdev_register_kobject() and emit it from
register_netdevice() next to rtmsg_ifinfo(). This is the last point in
register_netdevice() where no error can happen, so only fully registered
devices are announced: the registration error paths never reach it, and
the device_del() that unwinds them stays silent as well, leaving
userspace with neither an add nor a remove.
Fixes: f994752b11 ("net: ethtool: optionally skip rtnl_lock on IOCTL path")
Signed-off-by: Dragos Tatulea <dtatulea@nvidia.com>
Reviewed-by: Shahar Shitrit <shshitrit@nvidia.com>
Link: https://patch.msgid.link/20260806080758.2039586-2-dtatulea@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
sctp_make_heartbeat_ack() caches the destination transport in
chunk->transport without taking a reference. When src_out_of_asoc_ok is
enabled, the HEARTBEAT ACK may remain queued on control_chunk_list instead
of being transmitted immediately.
If the peer transport is removed while the chunk is still queued,
sctp_assoc_rm_peer() drops the transport and schedules it for RCU freeing,
but only clears cached transport pointers in out_chunk_list. The queued
control chunk therefore retains a dangling transport pointer.
Once an ASCONF_ACK clears the suppression and the queued control chunk is
transmitted, SCTP dereferences the stale transport pointer, leading to a
use-after-free.
Fix this by also clearing chunk->transport for queued control chunks in
control_chunk_list when removing the transport.
Fixes: 8a07eb0a50 ("sctp: Add ASCONF operation on the single-homed host")
Reported-by: Daniele Linguaglossa <danielelinguaglossa@gmail.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Link: https://patch.msgid.link/7e1168cb722132152a29d47e5eafaeac4a3bf6f3.1785943120.git.lucien.xin@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
vcc_setsockopt() contained an ineffective optlen check:
if (__SO_LEVEL_MATCH(optname, level) && optlen != __SO_SIZE(optname))
return -EINVAL;
If __SO_LEVEL_MATCH(optname, level) evaluated to false (e.g. if the caller
passed a mismatched level), the length check optlen != __SO_SIZE(optname)
was short-circuited and bypassed. Execution then fell through to switch(optname),
calling copy_from_sockptr() assuming optval contained sufficient space.
Furthermore, even if level matched, a cgroup BPF setsockopt filter could shrink
optlen after entry. Because copy_from_sockptr() on kernel pointers uses memcpy(),
this leads to a KASAN slab-out-of-bounds read when optlen is smaller than the
expected structure size.
Fix this by using copy_safe_from_sockptr(), which unconditionally validates
that optlen is at least the expected size before copying. Also change the local
'value' variable type from 'unsigned long' to 'int' so that SO_SETCLP matches
its sizeof(int) ABI encoding on 64-bit systems.
Fixes: 1da177e4c3 ("Linux-2.6.12-rc2")
Reported-by: syzbot+53ecc09fb81df10ef4de@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=53ecc09fb81df10ef4de
Signed-off-by: Eric Dumazet <edumazet@google.com>
Link: https://patch.msgid.link/20260805131508.3227331-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A ism interrupt handler can be active in parallel with ism_dev_exit(),
accessing freed data structures.
No new interrupts will be generated after unregister_ieq(). Drain ongoing
interrupt handlers by free_irq(), before freeing ism data structures.
Fixes: 684b89bc39 ("s390/ism: add device driver for internal shared memory")
Signed-off-by: Alexandra Winter <wintera@linux.ibm.com>
Link: https://patch.msgid.link/20260805131043.954639-1-wintera@linux.ibm.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Qihang Tang says:
====================
net: fix hard_header_len races in packet send paths
The packet socket TX paths read dev->hard_header_len independently for
skb allocation and header construction. Concurrent netdevice
reconfiguration (e.g. bonding device type changes) can change this value
in between, leading to mismatched headroom and copy length, and in the
SOCK_RAW case to out-of-bounds writes.
Patch 1 removes the CAP_SYS_RAWIO zero-padding branch in
dev_validate_header(). That branch sizes a memset against the live
dev->hard_header_len while operating on an skb whose headroom was
allocated from an earlier hard_header_len read, so a concurrent increase
can write past the reserved buffer. Removing it first keeps the later
snapshot fixes bisect-safe: they do not replace an earlier skb_under_panic
with a silent overwrite.
Patches 2 and 3 snapshot hard_header_len once per send and use it
consistently for allocation and construction, in the non-ring and TX_RING
paths respectively. The separate SOCK_DGRAM consistency problem between
hard_header_len and header_ops->create remains out of scope, as noted in
the commit messages.
====================
Link: https://patch.msgid.link/20260805125729.19220-1-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tpacket_snd() reads dev->hard_header_len independently for skb
allocation and header construction in tpacket_fill_skb(). Concurrent
netdevice reconfiguration can therefore make the reserved headroom
smaller than the amount later pushed, or make copylen - hard_header_len
negative.
Snapshot hard_header_len once before processing ring frames and use it
for the frame limit, headroom allocation, copy length, and skb
construction. Pass the snapshot to tpacket_fill_skb().
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: 69e3c75f4d ("net: TX_RING and packet mmap")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-4-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
packet_snd() reads dev->hard_header_len multiple times while allocating
and constructing an skb. Device reconfiguration can change this value
concurrently, for example through bonding device type changes.
For SOCK_RAW, packet_snd() can save a larger value in reserve and later
allocate headroom using a smaller value. Moving skb->data back by reserve
then places it before skb->head, and the following copy from userspace can
attempt an out-of-bounds write.
packet_sendmsg_spkt() has the same issue because it calculates its
reservation and header offset from separate reads before dropping the RCU
read lock to allocate the skb.
Add LL_RESERVED_SPACE_EX() for callers that already saved a header length.
Read hard_header_len once in packet_snd() and use it for allocation and
construction. In packet_sendmsg_spkt(), preserve the allocation-time value
through the device lookup retry.
The separate SOCK_DGRAM consistency problem between hard_header_len and
header_ops->create is not addressed here.
Fixes: b84bbaf7a6 ("packet: in packet_snd start writing at link layer allocation")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-3-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
dev_validate_header() reads dev->hard_header_len directly when
zero-padding short link layer headers for CAP_SYS_RAWIO holders:
if (capable(CAP_SYS_RAWIO)) {
memset(ll_header + len, 0, dev->hard_header_len - len);
return true;
}
Packet send paths call dev_validate_header() on skbs whose headroom was
allocated from an earlier hard_header_len read. If the device is
reconfigured so that dev->hard_header_len increases before validation,
the memset writes past the reserved buffer, an out-of-bounds write.
This out-of-bounds write is masked in some SOCK_RAW paths today because
the same concurrent increase can first make skb_push() exceed the
reserved headroom and trigger skb_under_panic(). Remove the zero-padding
branch before making those hard_header_len reads consistent, so the
snapshot fixes do not turn a loud panic into a silent overwrite.
This path is only reached for variable length L2 protocols, where
len < hard_header_len but len >= min_header_len. No remaining in-tree
variable length L2 protocol implements header_ops->validate, and the
CAP_SYS_RAWIO bypass that zero-pads and accepts short headers has no
real value beyond allowing testing of intentionally malformed input.
Drop the CAP_SYS_RAWIO branch. The remaining reads of
dev->hard_header_len in dev_validate_header() are comparisons only and
have no memory safety impact.
Suggested-by: Willem de Bruijn <willemb@google.com>
Fixes: 2793a23aac ("net: validate variable length ll headers")
Cc: stable@vger.kernel.org
Signed-off-by: Qihang Tang <q.h.hack.winter@gmail.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Link: https://patch.msgid.link/20260805125729.19220-2-q.h.hack.winter@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
fjes_remove() destroys the driver workqueues before unregistering the
netdev. The interrupt handler queues work on them, but the IRQ is only
freed from fjes_close() under unregister_netdev(), so an interrupt in that
window can queue work once the workqueues are gone.
Unregister the netdev first so fjes_close() frees the IRQ and cancels the
workers before the workqueues are destroyed. force_close_task, which the
workers arm on the system workqueue, is handled in the next patch.
This issue was found by an in-house static analysis tool.
Cc: stable+noautosel@kernel.org # untested fix to a driver init path race
Signed-off-by: Fan Wu <fanwu01@zju.edu.cn>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20260805011410.414431-1-fanwu01@zju.edu.cn
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The EEPROM board ID is a fixed 13-byte field and is not guaranteed to
contain a NUL terminator. Passing it directly to
devlink_info_version_fixed_put() treats it as a C string and may read
beyond the field.
Format at most OCP_BOARD_ID_LEN bytes into the existing local buffer
before reporting the ID. Use a precision limit because the snprintf()
output size alone does not bound the source string scan.
Fixes: 0cfcdd1ebc ("ptp: ocp: add nvmem interface for accessing eeprom")
Cc: stable@vger.kernel.org
Signed-off-by: Ahmad Byagowi <ahmadexp@gmail.com>
Reviewed-by: Vadim Fedorenko <vadim.fedorenko@linux.dev>
Link: https://patch.msgid.link/20260804210751.48248-1-ahmadexp@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
tls_decrypt_sg() advances msg->msg_iter when it maps user pages for
the optimistic TLS 1.3 zero-copy path. If the decrypted record turns
out not to be unpadded application data, tls_decrypt_sw() retries into
a kernel skb, but leaves the iterator advanced.
The subsequent copy from the skb then writes decrypted bytes again at
a later point in the caller iovecs while recvmsg() reports only the
post-retry length. A TLS peer can trigger this after the receiver
enables TLS_RX_EXPECT_NO_PAD.
Revert the iterator by the number of bytes consumed by the optimistic
mapping before retrying without zero-copy.
Add a selftest which sends a TLS 1.3 control record with
TLS_RX_EXPECT_NO_PAD enabled and verifies that recvmsg() does not
overwrite later iovecs beyond the returned length.
Fixes: ce61327ce9 ("tls: rx: support optimistic decrypt to user buffer with TLS 1.3")
Cc: stable@vger.kernel.org
Signed-off-by: Jérémy Jean <Jeremy.Jean@oss.cyber.gouv.fr>
Link: https://patch.msgid.link/20260804125528.2139928-1-Jeremy.Jean@oss.cyber.gouv.fr
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
chanyoung says:
====================
tls: fix plaintext sk_msg ring over-fill
An unprivileged user can oops the kernel by splicing into a kTLS socket
whose open record already has a full plaintext sk_msg ring. Reproduced on
net (53658c6f36) with a stock config, no KASAN.
Patch 2 oopses an unpatched kernel and passes with patch 1 applied.
====================
Link: https://patch.msgid.link/20260804052837.49015-1-ppoo1220@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Splicing onto a plaintext sk_msg ring that is already full used to wrap the
ring and make the kernel oops in the scatterwalk once the record was
pushed.
Only the copy path leaves the ring full without pushing it, so splice until
the ring is one fragment short, add the last fragment with a one-byte
MSG_MORE send, and splice once more before pushing the record.
CONFIG_MAX_SKB_FRAGS is 17..45, so that last fragment follows between 16
and 44 splices; sweep that range to trigger the bug on any build.
Signed-off-by: chanyoung <ppoo1220@gmail.com>
Link: https://patch.msgid.link/20260804052837.49015-3-ppoo1220@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When the copy path in tls_sw_sendmsg_locked() adds the fragment that fills
the plaintext sk_msg ring, it does not set full_record, so the record is
left full and unpushed. A later splice() then adds to an already full
ring: sk_msg_page_add() has no fullness check of its own, so sg.end wraps
onto sg.start and the ring appears empty. Fragments added after that
overwrite live entries, and sg.size no longer matches what is reachable
between sg.start and sg.end, so pushing the record runs the scatterwalk off
the end of the scatterlist.
An unprivileged user can trigger this on a loopback TCP socket with the
"tls" ULP attached:
BUG: kernel NULL pointer dereference, address: 0000000000000008
RIP: 0010:memcpy_from_scatterwalk+0x32/0xc0
Call Trace:
skcipher_walk_next+0x1d1/0x2c0
gcm_encrypt_aesni_avx+0x1e9/0x220
bpf_exec_tx_verdict+0x3bb/0x860
tls_sw_sendmsg+0xa1a/0xca0
__sys_sendto+0x1da/0x1f0
Set full_record in the copy path when the ring becomes full, and push a
record that is already full on entry to the sendmsg loop.
Suggested-by: Sabrina Dubroca <sd@queasysnail.net>
Fixes: fe1e81d4f7 ("tls/sw: Support MSG_SPLICE_PAGES")
Cc: stable@vger.kernel.org
Signed-off-by: chanyoung <ppoo1220@gmail.com>
Link: https://patch.msgid.link/20260804052837.49015-2-ppoo1220@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xdpf_clone() clones broadcast copies into a single page and sets
frame_sz to PAGE_SIZE. __xdp_build_skb_from_frame() later treats that
page like a normal XDP frame and expects the usual skb_shared_info
tailroom at the end of the buffer.
The current check only rejects frames whose linear xdp_frame header,
headroom, and packet data exceed PAGE_SIZE. A source frame backed by a
larger allocation can still satisfy that check while extending into the
clone's required shared-info area. When such a clone is converted back
into an skb, build_skb_around() places skb_shared_info over live packet
bytes and later writes can corrupt XDP return metadata.
Reject clones unless their linear area fits inside
SKB_WITH_OVERHEAD(PAGE_SIZE), matching the tailroom requirement already
enforced by the XDP-to-skb conversion path.
Fixes: e624d4ed4a ("xdp: Extend xdp_redirect_map with broadcast support")
Cc: stable@vger.kernel.org
Reported-by: Vega <vega@nebusec.ai>
Signed-off-by: Zhiling Zou <zhilinz@nebusec.ai>
Link: https://patch.msgid.link/6b2afef5d1738763c6965e8e466eb16e43e4f956.1785757386.git.zhilinz@nebusec.ai
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Matthieu Baerts says:
====================
mptcp: misc fixes for v7.2-rc6
Here are various unrelated fixes:
- Patches 1-3: harden incoming MPTCP suboptions parsing by rejecting
non-combinable ones. Patch 3 removes unreachable code after patch 2
added here for consistency, and to reduce comments from AI reviews.
Fixes for v5.6.
- Patch 4: fix a data race in the ADD_ADDR timer callback. A fix for
v5.13.
- Patch 5: correctly catch data corruption during the MPTCP join
selftest by marking tests as failed, instead of only printing a
warning. A fix for v5.18.
- Patch 6: fix a leak with the userspace ADD_ADDR list in case of race
condition during teardown. A fix for v5.19.
- Patch 7: deal with MPTFO with a valid token, but no data in the SYN. A
fix for v6.2.
- Patch 8: reclaim forward-allocated memory in case of error on the
receive side. A fix for v6.19.
====================
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-0-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Passive TCP Fast Open accepts a valid-cookie SYN even when it carries
no data. In that case the child socket's receive queue is intentionally
left empty.
mptcp_fastopen_subflow_synack_set_params() set is_mptfo before checking
for queued SYN data. That made data-less TFO SYNs hit a WARN and, if
the warning was non-fatal, left stale MPTFO state behind. The stale
flag could later trigger a state-confusion bug in
check_fully_established().
Only mark the subflow as MPTFO after confirming that an SKB was queued.
Return quietly when the receive queue is empty.
Note that mptcp_subflow_context's is_mptfo field is now not just about
subflows where the TFO was present, but about MPTFO subflow that
consumed SYN data. Only having a valid cookie but not carrying data is
not really "doing TFO".
Fixes: 36b122baf6 ("mptcp: add subflow_v(4,6)_send_synack()")
Cc: stable@vger.kernel.org
Reported-by: Yuan Tan <yuantan098@gmail.com>
Reported-by: Yifan Wu <yifanwucs@gmail.com>
Reported-by: Juefei Pu <tomapufckgml@gmail.com>
Reported-by: Zhengchuan Liang <zcliangcn@gmail.com>
Reported-by: Xin Liu <bird@lzu.edu.cn>
Signed-off-by: Wyatt Feng <bronzed_45_vested@icloud.com>
Signed-off-by: Ren Wei <n05ec@lzu.edu.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-7-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
mptcp_pm_destroy() empties msk->pm.anno_list and
msk->pm.userspace_pm_local_addr_list under msk->pm.lock during socket
teardown, dropping the lock between the two.
A concurrent userspace PM genl ANNOUNCE on the same msk holds a sock
reference via mptcp_token_get_sock() and, in
mptcp_pm_nl_announce_doit(), calls
mptcp_userspace_pm_append_new_local_addr() and
mptcp_pm_announced_alloc(). Both take msk->pm.lock briefly to add to
their respective lists. Because the genl handler holds a sock reference,
mptcp_pm_destroy() may run on the same msk via mptcp_disconnect(), which
invokes mptcp_destroy_common() without dropping the sock refcount,
before the handler completes.
If the lock acquisitions interleave such that mptcp_pm_destroy() empties
a list first, the later alloc adds its entry to a list head that nothing
else iterates for this msk, and the entry leaks. kmemleak reports both
mptcp_pm_add_addr objects (from mptcp_pm_announced_alloc()) and
mptcp_pm_addr_entry objects (from
mptcp_userspace_pm_append_new_local_addr()) under sustained concurrent
ANNOUNCE + close load against the userspace PM.
Add an MPTCP_PM_DESTROYING bit in msk->pm.status, set by
mptcp_pm_destroy() under pm.lock before the lists are emptied and
checked under pm.lock by the alloc paths. Either the alloc takes pm.lock
first, in which case its entry is on the list when mptcp_pm_destroy()
frees it; or mptcp_pm_destroy() takes pm.lock first, in which case the
later alloc observes the bit and refuses.
Found by an MPTCP protocol-flow harness extending BRF (arXiv:2305.08782).
Fixes: 9ab4807c84 ("mptcp: netlink: Add MPTCP_PM_CMD_ANNOUNCE")
Cc: stable@vger.kernel.org
Signed-off-by: Shardul Bankar <shardul.b@mpiricsoftware.com>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-6-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
check_transfer() compares the input and output files byte-by-byte using
`cmp -l "$in" "$out" | while read ...`. Because the while-loop body runs
in a subshell (the script sets neither lastpipe nor pipefail), the
fail_test call inside it -- which sets the global ret/last_test_failed --
and the `return 1` both act on the subshell, not on check_transfer().
check_transfer() thus always falls through to `return 0`, and any data
corruption affecting only the payload (leaving the subflow/PM counters
untouched) is silently reported as PASS.
Fixes: 8117dac3e7 ("selftests: mptcp: add invert check in check_transfer")
Cc: stable@vger.kernel.org
Signed-off-by: Gang Yan <yangang@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-5-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The timer callback reads entry->retrans_times outside pm.lock to decide
whether to call mptcp_pm_subflow_established(). Since
mptcp_pm_announced_del_timer() can concurrently set retrans_times =
ADD_ADDR_RETRANS_MAX under pm.lock, a race condition exists.
I discovered this issue while studying the code. AI tools helped me to
verify the issue can potentially happen under race conditions.
Use a local 'retransmit' flag set inside pm.lock to capture whether
retransmission is still possible when the lock is taken. This allows to
call mptcp_pm_subflow_established() accordingly, and not depending on
the situation that can be different when checked outside the pm.lock.
Fixes: 348d5c1dec ("mptcp: move to next addr when timeout")
Cc: stable@vger.kernel.org
Signed-off-by: Qing Luo <luoqing@kylinos.cn>
Reviewed-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-4-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some MPTCP suboptions are mutually exclusive according to the RFC8684,
but also because in different places, the code doesn't expect some
combinations to be present. That's specially true for suboptions that
would be present twice, but with different attributes.
The new restrictions are the same as the ones applied on the output
side, with mptcp_write_options. The same rules can be reused with a
small fix: an MP_FASTCLOSE can be used with a DSS when the sender picks
this option [1], which is not the case on Linux. Here are the rules:
Which options can be used together?
X: mutually exclusive
O: often used together
C: can be used together in some cases
P: could be used together but we prefer not to (optimisations)
| Opt: | MPC | MPJ | DSS | ADD | RM | PRIO | FAIL | FC |
|------|------|------|------|------|------|------|------|------|
| MPC |------|------|------|------|------|------|------|------|
| MPJ | X |------|------|------|------|------|------|------|
| DSS | X | X |------|------|------|------|------|------|
| ADD | X | X | P |------|------|------|------|------|
| RM | C | C | C | P |------|------|------|------|
| PRIO | X | C | C | C | C |------|------|------|
| FAIL | X | X | C | X | X | X |------|------|
| FC | X | X | P | X | X | X | X |------|
| RST | X | X | X | X | X | X | O | O |
|------|------|------|------|------|------|------|------|------|
The only difference is with the 'P': another stack could send and
ADD_ADDR with other suboptions (DSS, RM_ADDR), and this should be
allowed.
A few points of attention:
- In theory, an MP_CAPABLE could be used with a RM_ADDR, but there is
no reason to add it with a SYN. Note that even with a 4th ACK, it
doesn't seem to be useful, except when IDs are known in advance via
another channel. Better not to break that.
- Now, combining both an MP_CAPABLE and an MP_JOIN will no longer
result to a reject of the two options, but only the second suboption
is ignored. That seems OK to do that for this unexpected error. At
least now all inconsistent combinations are handled the same way.
This could change later in next. This also means the explicit checks
for having both MPC + MPJ in subflow.c will now be unreachable.
That's fine, they will be removed in a follow-up patch.
- In case of conflicting combinations, the extra suboption(s) is/are
ignored: having such combinations either means the remote peer is
buggy, or is evil. The simplest action is then taken in this case:
stop processing the current suboption.
- In mp_opt->suboptions, there is also a bit reserved to the checksum,
which can be used in an MP_CAPABLE and a DSS. Each time a DSS option
can be used in parallel with another option, the checksum can be set,
so the verification is combined into a new OPTIONS_MPTCP_DSS macro.
- An MP_CAPABLE ACK can carry a Data-Level Length, and an optional
Checksum: they are the same as the ones found in a DSS, because a DSS
cannot be used in parallel to an MP_CAPABLE. Similarly, even if there
is room, a DSS cannot be used with an MP_JOIN.
Fixes: eda7acddf8 ("mptcp: Handle MPTCP TCP options")
Cc: stable@vger.kernel.org
Link: https://www.rfc-editor.org/rfc/rfc8684.html#section-3.5-5.1 [1]
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Link: https://patch.msgid.link/20260803-net-mptcp-misc-fixes-7-2-rc6-v2-2-b8f496d71664@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In cxacru_unbind(), cancel_delayed_work_sync() was conditionally skipped
when poll_state was CXPOLL_STOPPED. However, a work item previously
scheduled when poll_state was CXPOLL_POLLING may still be pending in the
workqueue at the time poll_state transitions to CXPOLL_STOPPED. Skipping
cancel_delayed_work_sync() in this case allows the work to fire after
cxacru_data is freed, causing a use-after-free when cxacru_poll_status()
attempts to acquire instance->poll_state_serialize.
Fix this by always calling cancel_delayed_work_sync() regardless of
poll_state, ensuring no pending or in-flight work can access the freed
instance.
Cc: stable+noautosel@kernel.org # untested fix to a driver init path race
Reported-by: syzbot+24eb38c789655fc43663@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=24eb38c789655fc43663
Signed-off-by: Nguyen Quang Le Kien <khiemtranzo532001@gmail.com>
Link: https://patch.msgid.link/20260803101716.2592486-1-khiemtranzo532001@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
