As stm32_defconfig is dedicated to STM32 MCUs, disable
CONFIG_COMMON_CLK_STM32MP flag which is only used by STM32 MPUs.
Disable CONFIG_SUSPEND, CONFIG_ADVISE_SYSCALLS, CONFIG_IO_URING
CONFIG_POSIX_TIMERS, CONFIG_GCC_PLUGINS, it will reduce the kernel
image size for these platforms which embed a low amount of memory.
Tested on STM32F746-DISCO board which embeds 8MB of memory.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241220125506.3157268-5-patrice.chotard@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Running make savedefconfig highlights some useless flags.
Since 54a48aa3d558 ("Compiler Attributes: remove CONFIG_ENABLE_MUST_CHECK")
flag ENABLE_MUST_CHECK has been removed.
Since 35260cf545 ("Kconfig.debug: fix SCHED_DEBUG dependency")
SCHED_DEBUG depends on DEBUG_KERNEL and PROC_FS.
As PROC_FS is not set, SCHED_DEBUG reference can be removed.
Since 7801104268 ("scsi: bsg: Move bsg_scsi_ops to drivers/scsi/")
BLK_DEV_BSG depends on SCSI. As SCSI is not set, BLK_DEV_BSG reference
can be removed.
Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20241220125506.3157268-3-patrice.chotard@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
The CMN PLL hardware block is available in the Qualcomm IPQ SoC such
as IPQ9574 and IPQ5332. It provides fixed rate output clocks to Ethernet
related hardware blocks such as external Ethernet PHY or switch. This
driver is initially being enabled for IPQ9574. All boards based on
IPQ9574 SoC will require to include this driver in the build.
This CMN PLL hardware block does not provide any other specific function
on the IPQ SoC other than enabling output clocks to Ethernet related
devices.
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Luo Jie <quic_luoj@quicinc.com>
Link: https://lore.kernel.org/r/20250103-qcom_ipq_cmnpll-v8-3-c89fb4d4849d@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Enable clock controller, interconnect and pinctrl for Qualcomm
QCS8300 platform to boot QCS8300 RIDE board to UART console.
The serial engine depends on gcc, interconnect and pinctrl. Since
the serial console driver is only available as built-in, so these
configs needs be built-in for the UART device to probe and register
the console.
Reviewed-by: Krzysztof Kozlowski <krzk@kernel.org>
Signed-off-by: Jingyi Wang <quic_jingyw@quicinc.com>
Link: https://lore.kernel.org/r/20241203-qcs8300_initial_dtsi-v4-2-d7c953484024@quicinc.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Renesas ARM defconfig updates for v6.14
- Enable Watchdog support for the RZ/V2H(P) SoC and the RZ/V2H EVK
board in the ARM64 defconfig,
- Refresh shmobile_defconfig for v6.13-rc1,
- Enable support for the Renesas RZ/G3E (R9A09G047) SoC in the ARM64
defconfig.
* tag 'renesas-arm-defconfig-for-v6.14-tag1' of https://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: defconfig: Enable R9A09G047 SoC
ARM: shmobile: defconfig: Refresh for v6.13-rc1
arm64: defconfig: Enable Renesas RZ/V2H(P) Watchdog driver
Link: https://lore.kernel.org/r/cover.1734689799.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
ITE IT6263 LVDS to HDMI converter is populated on NXP IMX-LVDS-HDMI
and IMX-DLVDS-HDMI adapter cards. The adapter cards can connect to
i.MX8MP EVK base board to support video output through HDMI connectors.
Build the ITE IT6263 driver as a module.
Signed-off-by: Liu Ying <victor.liu@nxp.com>
Reviewed-by: Biju Das <biju.das.jz@bp.renesas.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull Kbuild fixes from Masahiro Yamada:
- Fix a section mismatch warning in modpost
- Fix Debian package build error with the O= option
* tag 'kbuild-fixes-v6.13' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kbuild: deb-pkg: fix build error with O=
modpost: Add .irqentry.text to OTHER_SECTIONS
Pull irq fixes from Borislav Petkov:
- Fix a /proc/interrupts formatting regression
- Have the BCM2836 interrupt controller enter power management states
properly
- Other fixlets
* tag 'irq_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/stm32mp-exti: CONFIG_STM32MP_EXTI should not default to y when compile-testing
genirq/proc: Add missing space separator back
irqchip/bcm2836: Enable SKIP_SET_WAKE and MASK_ON_SUSPEND
irqchip/gic-v3: Fix irq_complete_ack() comment
Pull timer fix from Borislav Petkov:
- Handle the case where clocksources with small counter width can,
in conjunction with overly long idle sleeps, falsely trigger the
negative motion detection of clocksources
* tag 'timers_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
clocksource: Make negative motion detection more robust
Pull x86 fixes from Borislav Petkov:
- Have the Automatic IBRS setting check on AMD does not falsely fire in
the guest when it has been set already on the host
- Make sure cacheinfo structures memory is allocated to address a boot
NULL ptr dereference on Intel Meteor Lake which has different numbers
of subleafs in its CPUID(4) leaf
- Take care of the GDT restoring on the kexec path too, as expected by
the kernel
- Make sure SMP is not disabled when IO-APIC is disabled on the kernel
cmdline
- Add a PGD flag _PAGE_NOPTISHADOW to instruct machinery not to
propagate changes to the kernelmode page tables, to the user portion,
in PTI
- Mark Intel Lunar Lake as affected by an issue where MONITOR wakeups
can get lost and thus user-visible delays happen
- Make sure PKRU is properly restored with XRSTOR on AMD after a PRKU
write of 0 (WRPKRU) which will mark PKRU in its init state and thus
lose the actual buffer
* tag 'x86_urgent_for_v6.13_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/CPU/AMD: WARN when setting EFER.AUTOIBRS if and only if the WRMSR fails
x86/cacheinfo: Delete global num_cache_leaves
cacheinfo: Allocate memory during CPU hotplug if not done from the primary CPU
x86/kexec: Restore GDT on return from ::preserve_context kexec
x86/cpu/topology: Remove limit of CPUs due to disabled IO/APIC
x86/mm: Add _PAGE_NOPTISHADOW bit to avoid updating userspace page tables
x86/cpu: Add Lunar Lake to list of CPUs with a broken MONITOR implementation
x86/pkeys: Ensure updated PKRU value is XRSTOR'd
x86/pkeys: Change caller of update_pkru_in_sigframe()
Pull misc fixes from Andrew Morton:
"24 hotfixes. 17 are cc:stable. 15 are MM and 9 are non-MM.
The usual bunch of singletons - please see the relevant changelogs for
details"
* tag 'mm-hotfixes-stable-2024-12-07-22-39' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (24 commits)
iio: magnetometer: yas530: use signed integer type for clamp limits
sched/numa: fix memory leak due to the overwritten vma->numab_state
mm/damon: fix order of arguments in damos_before_apply tracepoint
lib: stackinit: hide never-taken branch from compiler
mm/filemap: don't call folio_test_locked() without a reference in next_uptodate_folio()
scatterlist: fix incorrect func name in kernel-doc
mm: correct typo in MMAP_STATE() macro
mm: respect mmap hint address when aligning for THP
mm: memcg: declare do_memsw_account inline
mm/codetag: swap tags when migrate pages
ocfs2: update seq_file index in ocfs2_dlm_seq_next
stackdepot: fix stack_depot_save_flags() in NMI context
mm: open-code page_folio() in dump_page()
mm: open-code PageTail in folio_flags() and const_folio_flags()
mm: fix vrealloc()'s KASAN poisoning logic
Revert "readahead: properly shorten readahead when falling back to do_page_cache_ra()"
selftests/damon: add _damon_sysfs.py to TEST_FILES
selftest: hugetlb_dio: fix test naming
ocfs2: free inode when ocfs2_get_init_inode() fails
nilfs2: fix potential out-of-bounds memory access in nilfs_find_entry()
...
Since commit 13b25489b6 ("kbuild: change working directory to external
module directory with M="), the Debian package build fails if a relative
path is specified with the O= option.
$ make O=build bindeb-pkg
[ snip ]
dpkg-deb: building package 'linux-image-6.13.0-rc1' in '../linux-image-6.13.0-rc1_6.13.0-rc1-6_amd64.deb'.
Rebuilding host programs with x86_64-linux-gnu-gcc...
make[6]: Entering directory '/home/masahiro/linux/build'
/home/masahiro/linux/Makefile:190: *** specified kernel directory "build" does not exist. Stop.
This occurs because the sub_make_done flag is cleared, even though the
working directory is already in the output directory.
Passing KBUILD_OUTPUT=. resolves the issue.
Fixes: 13b25489b6 ("kbuild: change working directory to external module directory with M=")
Reported-by: Charlie Jenkins <charlie@rivosinc.com>
Closes: https://lore.kernel.org/all/Z1DnP-GJcfseyrM3@ghost/
Tested-by: Charlie Jenkins <charlie@rivosinc.com>
Reviewed-by: Charlie Jenkins <charlie@rivosinc.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The compiler can fully inline the actual handler function of an interrupt
entry into the .irqentry.text entry point. If such a function contains an
access which has an exception table entry, modpost complains about a
section mismatch:
WARNING: vmlinux.o(__ex_table+0x447c): Section mismatch in reference ...
The relocation at __ex_table+0x447c references section ".irqentry.text"
which is not in the list of authorized sections.
Add .irqentry.text to OTHER_SECTIONS to cure the issue.
Reported-by: Sergey Senozhatsky <senozhatsky@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: stable@vger.kernel.org # needed for linux-5.4-y
Link: https://lore.kernel.org/all/20241128111844.GE10431@google.com/
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull smb client fixes from Steve French:
- DFS fix (for race with tree disconnect and dfs cache worker)
- Four fixes for SMB3.1.1 posix extensions:
- improve special file support e.g. to Samba, retrieving the file
type earlier
- reduce roundtrips (e.g. on ls -l, in some cases)
* tag '6.13-rc1-smb3-client-fixes' of git://git.samba.org/sfrench/cifs-2.6:
smb: client: fix potential race in cifs_put_tcon()
smb3.1.1: fix posix mounts to older servers
fs/smb/client: cifs_prime_dcache() for SMB3 POSIX reparse points
fs/smb/client: Implement new SMB3 POSIX type
fs/smb/client: avoid querying SMB2_OP_QUERY_WSL_EA for SMB3 POSIX
Pull SCSI fixes from James Bottomley:
"Large number of small fixes, all in drivers"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (32 commits)
scsi: scsi_debug: Fix hrtimer support for ndelay
scsi: storvsc: Do not flag MAINTENANCE_IN return of SRB_STATUS_DATA_OVERRUN as an error
scsi: ufs: core: Add missing post notify for power mode change
scsi: sg: Fix slab-use-after-free read in sg_release()
scsi: ufs: core: sysfs: Prevent div by zero
scsi: qla2xxx: Update version to 10.02.09.400-k
scsi: qla2xxx: Supported speed displayed incorrectly for VPorts
scsi: qla2xxx: Fix NVMe and NPIV connect issue
scsi: qla2xxx: Remove check req_sg_cnt should be equal to rsp_sg_cnt
scsi: qla2xxx: Fix use after free on unload
scsi: qla2xxx: Fix abort in bsg timeout
scsi: mpi3mr: Update driver version to 8.12.0.3.50
scsi: mpi3mr: Handling of fault code for insufficient power
scsi: mpi3mr: Start controller indexing from 0
scsi: mpi3mr: Fix corrupt config pages PHY state is switched in sysfs
scsi: mpi3mr: Synchronize access to ioctl data buffer
scsi: mpt3sas: Update driver version to 51.100.00.00
scsi: mpt3sas: Diag-Reset when Doorbell-In-Use bit is set during driver load time
scsi: ufs: pltfrm: Dellocate HBA during ufshcd_pltfrm_remove()
scsi: ufs: pltfrm: Drop PM runtime reference count after ufshcd_remove()
...
Pull block fixes from Jens Axboe:
- NVMe pull request via Keith:
- Target fix using incorrect zero buffer (Nilay)
- Device specifc deallocate quirk fixes (Christoph, Keith)
- Fabrics fix for handling max command target bugs (Maurizio)
- Cocci fix usage for kzalloc (Yu-Chen)
- DMA size fix for host memory buffer feature (Christoph)
- Fabrics queue cleanup fixes (Chunguang)
- CPU hotplug ordering fixes
- Add missing MODULE_DESCRIPTION for rnull
- bcache error value fix
- virtio-blk queue freeze fix
* tag 'block-6.13-20241207' of git://git.kernel.dk/linux:
blk-mq: move cpuhp callback registering out of q->sysfs_lock
blk-mq: register cpuhp callback after hctx is added to xarray table
virtio-blk: don't keep queue frozen during system suspend
nvme-tcp: simplify nvme_tcp_teardown_io_queues()
nvme-tcp: no need to quiesce admin_q in nvme_tcp_teardown_io_queues()
nvme-rdma: unquiesce admin_q before destroy it
nvme-tcp: fix the memleak while create new ctrl failed
nvme-pci: don't use dma_alloc_noncontiguous with 0 merge boundary
nvmet: replace kmalloc + memset with kzalloc for data allocation
nvme-fabrics: handle zero MAXCMD without closing the connection
bcache: revert replacing IS_ERR_OR_NULL with IS_ERR again
nvme-pci: remove two deallocate zeroes quirks
block: rnull: add missing MODULE_DESCRIPTION
nvme: don't apply NVME_QUIRK_DEALLOCATE_ZEROES when DSM is not supported
nvmet: use kzalloc instead of ZERO_PAGE in nvme_execute_identify_ns_nvm()
Pull io_uring fix from Jens Axboe:
"A single fix for a parameter type which affects 32-bit"
* tag 'io_uring-6.13-20241207' of git://git.kernel.dk/linux:
io_uring: Change res2 parameter type in io_uring_cmd_done
Pull bpf fixes from Daniel Borkmann::
- Fix several issues for BPF LPM trie map which were found by syzbot
and during addition of new test cases (Hou Tao)
- Fix a missing process_iter_arg register type check in the BPF
verifier (Kumar Kartikeya Dwivedi, Tao Lyu)
- Fix several correctness gaps in the BPF verifier when interacting
with the BPF stack without CAP_PERFMON (Kumar Kartikeya Dwivedi,
Eduard Zingerman, Tao Lyu)
- Fix OOB BPF map writes when deleting elements for the case of xsk map
as well as devmap (Maciej Fijalkowski)
- Fix xsk sockets to always clear DMA mapping information when
unmapping the pool (Larysa Zaremba)
- Fix sk_mem_uncharge logic in tcp_bpf_sendmsg to only uncharge after
sent bytes have been finalized (Zijian Zhang)
- Fix BPF sockmap with vsocks which was missing a queue check in poll
and sockmap cleanup on close (Michal Luczaj)
- Fix tools infra to override makefile ARCH variable if defined but
empty, which addresses cross-building tools. (Björn Töpel)
- Fix two resolve_btfids build warnings on unresolved bpf_lsm symbols
(Thomas Weißschuh)
- Fix a NULL pointer dereference in bpftool (Amir Mohammadi)
- Fix BPF selftests to check for CONFIG_PREEMPTION instead of
CONFIG_PREEMPT (Sebastian Andrzej Siewior)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: (31 commits)
selftests/bpf: Add more test cases for LPM trie
selftests/bpf: Move test_lpm_map.c to map_tests
bpf: Use raw_spinlock_t for LPM trie
bpf: Switch to bpf mem allocator for LPM trie
bpf: Fix exact match conditions in trie_get_next_key()
bpf: Handle in-place update for full LPM trie correctly
bpf: Handle BPF_EXIST and BPF_NOEXIST for LPM trie
bpf: Remove unnecessary kfree(im_node) in lpm_trie_update_elem
bpf: Remove unnecessary check when updating LPM trie
selftests/bpf: Add test for narrow spill into 64-bit spilled scalar
selftests/bpf: Add test for reading from STACK_INVALID slots
selftests/bpf: Introduce __caps_unpriv annotation for tests
bpf: Fix narrow scalar spill onto 64-bit spilled scalar slots
bpf: Don't mark STACK_INVALID as STACK_MISC in mark_stack_slot_misc
samples/bpf: Remove unnecessary -I flags from libbpf EXTRA_CFLAGS
bpf: Zero index arg error string for dynptr and iter
selftests/bpf: Add tests for iter arg check
bpf: Ensure reg is PTR_TO_STACK in process_iter_arg
tools: Override makefile ARCH variable if defined, but empty
selftests/bpf: Add apply_bytes test to test_txmsg_redir_wait_sndmem in test_sockmap
...
Pull arm64 fixes from Catalin Marinas:
"Nothing major, some left-overs from the recent merging window (MTE,
coco) and some newly found issues like the ptrace() ones.
- MTE/hugetlbfs:
- Set VM_MTE_ALLOWED in the arch code and remove it from the core
code for hugetlbfs mappings
- Fix copy_highpage() warning when the source is a huge page but
not MTE tagged, taking the wrong small page path
- drivers/virt/coco:
- Add the pKVM and Arm CCA drivers under the arm64 maintainership
- Fix the pkvm driver to fall back to ioremap() (and warn) if the
MMIO_GUARD hypercall fails
- Keep the Arm CCA driver default 'n' rather than 'm'
- A series of fixes for the arm64 ptrace() implementation,
potentially leading to the kernel consuming uninitialised stack
variables when PTRACE_SETREGSET is invoked with a length of 0
- Fix zone_dma_limit calculation when RAM starts below 4GB and
ZONE_DMA is capped to this limit
- Fix early boot warning with CONFIG_DEBUG_VIRTUAL=y triggered by a
call to page_to_phys() (from patch_map()) which checks pfn_valid()
before vmemmap has been set up
- Do not clobber bits 15:8 of the ASID used for TTBR1_EL1 and TLBI
ops when the kernel assumes 8-bit ASIDs but running under a
hypervisor on a system that implements 16-bit ASIDs (found running
Linux under Parallels on Apple M4)
- ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A as it
is using the same SMMU PMCG as HIP09 and suffers from the same
errata
- Add GCS to cpucap_is_possible(), missed in the recent merge"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: ptrace: fix partial SETREGSET for NT_ARM_GCS
arm64: ptrace: fix partial SETREGSET for NT_ARM_POE
arm64: ptrace: fix partial SETREGSET for NT_ARM_FPMR
arm64: ptrace: fix partial SETREGSET for NT_ARM_TAGGED_ADDR_CTRL
arm64: cpufeature: Add GCS to cpucap_is_possible()
coco: virt: arm64: Do not enable cca guest driver by default
arm64: mte: Fix copy_highpage() warning on hugetlb folios
arm64: Ensure bits ASID[15:8] are masked out when the kernel uses 8-bit ASIDs
ACPI/IORT: Add PMCG platform information for HiSilicon HIP09A
MAINTAINERS: Add CCA and pKVM CoCO guest support to the ARM64 entry
drivers/virt: pkvm: Don't fail ioremap() call if MMIO_GUARD fails
arm64: patching: avoid early page_to_phys()
arm64: mm: Fix zone_dma_limit calculation
arm64: mte: set VM_MTE_ALLOWED for hugetlbfs at correct place
Pull memblock fixes from Mike Rapoport:
"Restore check for node validity in arch_numa.
The rework of NUMA initialization in arch_numa dropped a check that
refused to accept configurations with invalid node IDs.
Restore that check to ensure that when firmware passes invalid nodes,
such configuration is rejected and kernel gracefully falls back to
dummy NUMA"
* tag 'fixes-2024-12-06' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arch_numa: Restore nid checks before registering a memblock with a node
memblock: allow zero threshold in validate_numa_converage()
Pull more drm fixes from Simona Vetter:
"Due to mailing list unreliability we missed the amdgpu pull, hence
part two with that now included:
- amdgu: mostly display fixes + jpeg vcn 1.0, sriov, dcn4.0 resume
fixes
- amdkfd fixes"
* tag 'drm-fixes-2024-12-06' of https://gitlab.freedesktop.org/drm/kernel:
drm/amdgpu: rework resume handling for display (v2)
drm/amd/pm: fix and simplify workload handling
Revert "drm/amd/pm: correct the workload setting"
drm/amdgpu: fix sriov reinit late orders
drm/amdgpu: Fix ISP hw init issue
drm/amd/display: Add hblank borrowing support
drm/amd/display: Limit VTotal range to max hw cap minus fp
drm/amd/display: Correct prefetch calculation
drm/amd/display: Add option to retrieve detile buffer size
drm/amd/display: Add a left edge pixel if in YCbCr422 or YCbCr420 and odm
drm/amdkfd: hard-code cacheline for gc943,gc944
drm/amdkfd: add MEC version that supports no PCIe atomics for GFX12
drm/amd/display: Fix programming backlight on OLED panels
drm/amd: Sanity check the ACPI EDID
drm/amdgpu/hdp7.0: do a posting read when flushing HDP
drm/amdgpu/hdp6.0: do a posting read when flushing HDP
drm/amdgpu/hdp5.2: do a posting read when flushing HDP
drm/amdgpu/hdp5.0: do a posting read when flushing HDP
drm/amdgpu/hdp4.0: do a posting read when flushing HDP
drm/amdgpu/jpeg1.0: fix idle work handler
