When a direct I/O write is performed, iomap_dio_rw() invalidates the
part of the page cache which the write is going to before carrying out
the write. In the odd case, the direct I/O write will be reading from
the same page it is writing to. gfs2 carries out writes with page
faults disabled, so it should have been obvious that this page
invalidation can cause iomap_dio_rw() to never make any progress.
Currently, gfs2 will end up in an endless retry loop in
gfs2_file_direct_write() instead, though.
Break this endless loop by limiting the number of retries and falling
back to buffered I/O after that.
Also simplify should_fault_in_pages() sightly and add a comment to make
the above case easier to understand.
Reported-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andreas Gruenbacher <agruenba@redhat.com>
Pull btrfs fixes from David Sterba:
"One bug fix and two build warning fixes:
- call proper end bio callback for metadata RAID0 in a rare case of
an unaligned block
- fix uninitialized variable (reported by gcc 10.2)
- fix warning about potential access beyond array bounds on mips64
with 64k pages (runtime check would not allow that)"
* tag 'for-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix csum_tree_block page iteration to avoid tripping on -Werror=array-bounds
btrfs: fix an uninitialized variable warning in btrfs_log_inode
btrfs: call btrfs_orig_bbio_end_io in btrfs_end_bio_work
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix BPF CO-RE naming convention for checking the availability of
fields on 'union perf_mem_data_src' on the running kernel
- Remove the use of llvm-strip on BPF skel object files, not needed,
fixes a build breakage when the llvm package, that contains it in
most distros, isn't installed
- Fix tools that use both evsel->{bpf_counter_list,bpf_filters},
removing them from a union
- Remove extra "--" from the 'perf ftrace latency' --use-nsec option,
previously it was working only when using the '-n' alternative
- Don't stop building when both binutils-devel and a C++ compiler isn't
available to compile the alternative C++ demangle support code,
disable that feature instead
- Sync the linux/in.h and coresight-pmu.h header copies with the kernel
sources
- Fix relative include path to cs-etm.h
* tag 'perf-tools-fixes-for-v6.4-2-2023-05-30' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf evsel: Separate bpf_counter_list and bpf_filters, can be used at the same time
tools headers UAPI: Sync the linux/in.h with the kernel sources
perf cs-etm: Copy kernel coresight-pmu.h header
perf bpf: Do not use llvm-strip on BPF binary
perf build: Don't compile demangle-cxx.cpp if not necessary
perf arm: Fix include path to cs-etm.h
perf bpf filter: Fix a broken perf sample data naming for BPF CO-RE
perf ftrace latency: Remove unnecessary "--" from --use-nsec option
Pull regmap fixes from Mark Brown:
"The most important fix here is for missing dropping of the RCU read
lock when syncing maple tree register caches, the physical devices I
have that use the code don't do any syncing so I'd only ever tested
this with virtual devices and missed the fact that we need to drop the
lock in order to write to buses that need to sleep.
Otherwise there's a fix for an edge case when splitting up large batch
writes which has been lurking for a long time, a check to make sure
nobody writes new drivers with a bug that was found in several
SoundWire drivers and a tweak to the way the new kunit tests are
enabled to ensure they don't cause regmap to be enabled when it
wouldn't otherwise be"
* tag 'regmap-fix-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: maple: Drop the RCU read lock while syncing registers
regmap: sdw: check for invalid multi-register writes config
regmap: Account for register length when chunking
regmap: REGMAP_KUNIT should not select REGMAP
Pull modules fix from Luis Chamberlain:
"A fix is provided for ia64. Even though ia64 is on life support it
helps to fix issues if we can. Thanks to Linus for doing tons of the
ia64 debugging"
* tag 'modules-6.4-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/mcgrof/linux:
module: fix module load for ia64
Pull tracing fixes from Steven Rostedt:
"User events:
- Use long instead of int for storing the enable set/clear bit, as it
was found that big endian machines could end up using the wrong
bits.
- Split allocating mm and attaching it. This keeps the allocation
separate from the registration and avoids various races.
- Remove RCU locking around pin_user_pages_remote() as that can
schedule. The RCU protection is no longer needed with the above
split of mm allocation and attaching.
- Rename the "link" fields of the various structs to something more
meaningful.
- Add comments around user_event_mm struct usage and locking
requirements.
Timerlat tracer:
- Fix missed wakeup of timerlat thread caused by the timerlat
interrupt triggering when tracing is off. The timer interrupt
handler needs to always wake up the timerlat thread regardless if
tracing is enabled or not, otherwise, it will never wake up.
Histograms:
- Fix regression of breaking the "stacktrace" modifier for variables.
That modifier cannot be used for values, but can be used for
variables that are passed from one histogram to the next. This was
broken when adding the restriction to values as the variable logic
used the same code.
- Rename the special field "stacktrace" to "common_stacktrace".
Special fields (that are not actually part of the event, but can
act just like event fields, like 'comm' and 'timestamp') should be
prefixed with 'common_' for consistency. To keep backward
compatibility, 'stacktrace' can still be used (as with the special
field 'cpu'), but can be overridden if the event has a field called
'stacktrace'.
- Update the synthetic event selftests to use the new name (synthetic
events are created by histograms)
Tracing bootup selftests:
- Reorganize the code to keep artifacts of the selftests not compiled
in when selftests are not configured.
- Add various cond_resched() around the selftest code, as the
softlock watchdog was triggering much more often. It appears that
the kernel runs slower now with full debugging enabled.
- While debugging ftrace with ftrace (using an instance ring buffer
instead of the top level one), I found that the selftests were
disabling prints to the debug instance.
This should not happen, as the selftests only disable printing to
the main buffer as the selftests examine the main buffer to see if
it has what it expects, and prints can make the tests fail.
Make the selftests only disable printing to the toplevel buffer,
and leave the instance buffers alone"
* tag 'trace-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
tracing: Have function_graph selftest call cond_resched()
tracing: Only make selftest conditionals affect the global_trace
tracing: Make tracing_selftest_running/delete nops when not used
tracing: Have tracer selftests call cond_resched() before running
tracing: Move setting of tracing_selftest_running out of register_tracer()
tracing/selftests: Update synthetic event selftest to use common_stacktrace
tracing: Rename stacktrace field to common_stacktrace
tracing/histograms: Allow variables to have some modifiers
tracing/user_events: Document user_event_mm one-shot list usage
tracing/user_events: Rename link fields for clarity
tracing/user_events: Remove RCU lock while pinning pages
tracing/user_events: Split up mm alloc and attach
tracing/timerlat: Always wakeup the timerlat thread
tracing/user_events: Use long vs int for atomic bit ops
Pull crypto fix from Herbert Xu:
"Fix an alignment crash in x86/aria"
* tag 'v6.4-p3' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
crypto: x86/aria - Use 16 byte alignment for GFNI constant vectors
This reverts commit 9828ed3f69.
Sadly, it does seem to cause failures to load modules. Johan Hovold reports:
"This change breaks module loading during boot on the Lenovo Thinkpad
X13s (aarch64).
Specifically it results in indefinite probe deferral of the display
and USB (ethernet) which makes it a pain to debug. Typing in the dark
to acquire some logs reveals that other modules are missing as well"
Since this was applied late as a "let's try this", I'm reverting it
asap, and we can try to figure out what goes wrong later. The excessive
parallel module loading problem is annoying, but not noticeable in
normal situations, and this was only meant as an optimistic workaround
for a user-space bug.
One possible solution may be to do the optimistic exclusive open first,
and then use a lock to serialize loading if that fails.
Reported-by: Johan Hovold <johan@kernel.org>
Link: https://lore.kernel.org/lkml/ZHRpH-JXAxA6DnzR@hovoldconsulting.com/
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
When all kernel debugging is enabled (lockdep, KSAN, etc), the function
graph enabling and disabling can take several seconds to complete. The
function_graph selftest enables and disables function graph tracing
several times. With full debugging enabled, the soft lockup watchdog was
triggering because the selftest was running without ever scheduling.
Add cond_resched() throughout the test to make sure it does not trigger
the soft lockup detector.
Link: https://lkml.kernel.org/r/20230528051742.1325503-6-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The tracing_selftest_running and tracing_selftest_disabled variables were
to keep trace_printk() and other writes from affecting the tracing
selftests, as the tracing selftests would examine the ring buffer to see
if it contained what it expected or not. trace_printk() and friends could
add to the ring buffer and cause the selftests to fail (and then disable
the tracer that was being tested). To keep that from happening, these
variables were added and would keep trace_printk() and friends from
writing to the ring buffer while the tests were going on.
But this was only the top level ring buffer (owned by the global_trace
instance). There is no reason to prevent writing into ring buffers of
other instances via the trace_array_printk() and friends. For the
functions that could be used by other instances, check if the global_trace
is the tracer instance that is being written to before deciding to not
allow the write.
Link: https://lkml.kernel.org/r/20230528051742.1325503-5-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
As there are more and more internal selftests being added to the Linux
kernel (KSAN, lockdep, etc) the selftests are taking longer to run when
these are enabled. Add a cond_resched() to the calling of
do_run_tracer_selftest() to force a schedule if NEED_RESCHED is set,
otherwise the soft lockup watchdog may trigger on boot up.
Link: https://lkml.kernel.org/r/20230528051742.1325503-3-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
The variables tracing_selftest_running and tracing_selftest_disabled are
only used for when CONFIG_FTRACE_STARTUP_TEST is enabled. Make them only
visible within the selftest code. The setting of those variables are in
the register_tracer() call, and set in a location where they do not need
to be. Create a wrapper around run_tracer_selftest() called
do_run_tracer_selftest() which sets those variables, and have
register_tracer() call that instead.
Having those variables only set within the CONFIG_FTRACE_STARTUP_TEST
scope gets rid of them (and also the ability to remove testing against
them) when the startup tests are not enabled (most cases).
Link: https://lkml.kernel.org/r/20230528051742.1325503-2-rostedt@goodmis.org
Signed-off-by: Steven Rostedt (Google) <rostedt@goodmis.org>
Pull dmaengine fixes from Vinod Koul:
"Driver fixes for the at-hdmac, pl330, TI and IDXD drivers:
- AT HDMAC driver fixes for Flow Controller bitfield, peripheral ID
handling and potential NULL dereference check
- PL330 function rename to avoid conflicts
- build warning fix for pm function in TI driver
- IDXD driver fix for passing freed memory"
* tag 'dmaengine-fix-6.4' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine:
dmaengine: at_hdmac: Extend the Flow Controller bitfield to three bits
dmaengine: at_hdmac: Repair bitfield macros for peripheral ID handling
dmaengine: pl330: rename _start to prevent build error
dmaengine: at_xdmac: fix potential Oops in at_xdmac_prep_interleaved()
dmaengine: ti: k3-udma: annotate pm function with __maybe_unused
dmaengine: idxd: Fix passing freed memory in idxd_cdev_open()
Pull x86 cpu fix from Thomas Gleixner:
"A single fix for x86:
- Prevent a bogus setting for the number of HT siblings, which is
caused by the CPUID evaluation trainwreck of X86. That recomputes
the value for each CPU, so the last CPU "wins". That can cause
completely bogus sibling values"
* tag 'x86-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/topology: Fix erroneous smp_num_siblings on Intel Hybrid platforms
Pull perf fixes from Thomas Gleixner:
"A small set of perf fixes:
- Make the MSR-readout based CHA discovery work around broken
discovery tables in some SPR firmwares.
- Prevent saving PEBS configuration which has software bits set that
cause a crash when restored into the relevant MSR"
* tag 'perf-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/uncore: Correct the number of CHAs on SPR
perf/x86/intel: Save/restore cpuc->active_pebs_data_cfg when using guest PEBS
Pull unwinder fixes from Thomas Gleixner:
"A set of unwinder and tooling fixes:
- Ensure that the stack pointer on x86 is aligned again so that the
unwinder does not read past the end of the stack
- Discard .note.gnu.property section which has a pointlessly
different alignment than the other note sections. That confuses
tooling of all sorts including readelf, libbpf and pahole"
* tag 'objtool-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/show_trace_log_lvl: Ensure stack pointer is aligned, again
vmlinux.lds.h: Discard .note.gnu.property section
Pull debugobjects fixes from Thomas Gleixner:
"Two fixes for debugobjects:
- Prevent the allocation path from waking up kswapd.
That's a long standing issue due to the GFP_ATOMIC allocation flag.
As debug objects can be invoked from pretty much any context waking
kswapd can end up in arbitrary lock chains versus the waitqueue
lock
- Correct the explicit lockdep wait-type violation in
debug_object_fill_pool()"
* tag 'core-debugobjects-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Don't wake up kswapd from fill_pool()
debugobjects,locking: Annotate debug_object_fill_pool() wait type violation
Pull irq fixes from Thomas Gleixner:
"A set of fixes for interrupt chip drivers:
- Prevent loss of state in the MIPS GIC interrupt controller
- Disable pseudo NMIs on Mediatek based Chromebooks as they have
firmware issues which cause instantenous chrashes and freezes wen
pseudo NMIs are used
- Fix the error handling path in the MBIGEN driver and a defined but
not used warning in the meson-gpio interrupt chip driver"
* tag 'irq-urgent-2023-05-28' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mbigen: Unify the error handling in mbigen_of_create_domain()
irqchip/meson-gpio: Mark OF related data as maybe unused
irqchip/mips-gic: Use raw spinlock for gic_lock
irqchip/mips-gic: Don't touch vl_map if a local interrupt is not routable
irqchip/gic-v3: Disable pseudo NMIs on Mediatek devices w/ firmware issues
dt-bindings: interrupt-controller: arm,gic-v3: Add quirk for Mediatek SoCs w/ broken FW
Pull MIPS fixes from Thomas Bogendoerfer:
- fixes to get alchemy platform back in shape
- fix for initrd detection
* tag 'mips-fixes_6.4_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
mips: Move initrd_start check after initrd address sanitisation.
MIPS: Alchemy: fix dbdma2
MIPS: Restore Au1300 support
MIPS: unhide PATA_PLATFORM
Pull powerpc fix from Michael Ellerman:
- Reinstate ARCH_FORCE_MAX_ORDER ranges to fix various breakage
* tag 'powerpc-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc/mm: Reinstate ARCH_FORCE_MAX_ORDER ranges
Pull xen fixes from Juergen Gross:
- a double free fix in the Xen pvcalls backend driver
- a fix for a regression causing the MSI related sysfs entries to not
being created in Xen PV guests
- a fix in the Xen blkfront driver for handling insane input data
better
* tag 'for-linus-6.4-rc4-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/xen/tip:
x86/pci/xen: populate MSI sysfs entries
xen/pvcalls-back: fix double frees with pvcalls_new_active_socket()
xen/blkfront: Only check REQ_FUA for writes
Pull char/misc fixes from Greg KH:
"Here are some small driver fixes for 6.4-rc4. They are just two
different types:
- binder fixes and reverts for reported problems and regressions in
the binder "driver".
- coresight driver fixes for reported problems.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'char-misc-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
binder: fix UAF of alloc->vma in race with munmap()
binder: add lockless binder_alloc_(set|get)_vma()
Revert "android: binder: stop saving a pointer to the VMA"
Revert "binder_alloc: add missing mmap_lock calls when using the VMA"
binder: fix UAF caused by faulty buffer cleanup
coresight: perf: Release Coresight path when alloc trace id failed
coresight: Fix signedness bug in tmc_etr_buf_insert_barrier_packet()
Pull compute express link fixes from Dan Williams:
"The 'media ready' series prevents the driver from acting on bad
capacity information, and it moves some checks earlier in the init
sequence which impacts topics in the queue for 6.5.
Additional hotplug testing uncovered a missing enable for memory
decode. A debug crash fix is also included.
Summary:
- Stop trusting capacity data before the "media ready" indication
- Add missing HDM decoder capability enable for the cold-plug case
- Fix a debug message induced crash"
* tag 'cxl-fixes-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Explicitly initialize resources when media is not ready
cxl/port: Fix NULL pointer access in devm_cxl_add_port()
cxl: Move cxl_await_media_ready() to before capacity info retrieval
cxl: Wait Memory_Info_Valid before access memory related info
cxl/port: Enable the HDM decoder capability for switch ports
Pull ARM SoC fixes from Arnd Bergmann:
"There have not been a lot of fixes for for the soc tree in 6.4, but
these have been sitting here for too long.
For the devicetree side, there is one minor warning fix for vexpress,
the rest all all for the the NXP i.MX platforms: SoC specific bugfixes
for the iMX8 clocks and its USB-3.0 gadget device, as well as board
specific fixes for regulators and the phy on some of the i.MX boards.
The microchip risc-v and arm32 maintainers now also add a shared
maintainer file entry for the arm64 parts.
The remaining fixes are all for firmware drivers, addressing mistakes
in the optee, scmi and ff-a firmware driver implementation, mostly in
the error handling code, incorrect use of the alloc_workqueue()
interface in SCMI, and compatibility with corner cases of the firmware
implementation"
* tag 'arm-fixes-6.4-1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: update arm64 Microchip entries
arm64: dts: imx8: fix USB 3.0 Gadget Failure in QM & QXPB0 at super speed
dt-binding: cdns,usb3: Fix cdns,on-chip-buff-size type
arm64: dts: colibri-imx8x: delete adc1 and dsp
arm64: dts: colibri-imx8x: fix iris pinctrl configuration
arm64: dts: colibri-imx8x: move pinctrl property from SoM to eval board
arm64: dts: colibri-imx8x: fix eval board pin configuration
arm64: dts: imx8mp: Fix video clock parents
ARM: dts: imx6qdl-mba6: Add missing pvcie-supply regulator
ARM: dts: imx6ull-dhcor: Set and limit the mode for PMIC buck 1, 2 and 3
arm64: dts: imx8mn-var-som: fix PHY detection bug by adding deassert delay
arm64: dts: imx8mn: Fix video clock parents
firmware: arm_ffa: Set reserved/MBZ fields to zero in the memory descriptors
firmware: arm_ffa: Fix FFA device names for logical partitions
firmware: arm_ffa: Fix usage of partition info get count flag
firmware: arm_ffa: Check if ffa_driver remove is present before executing
arm64: dts: arm: add missing cache properties
ARM: dts: vexpress: add missing cache properties
firmware: arm_scmi: Fix incorrect alloc_workqueue() invocation
optee: fix uninited async notif value
Pull PCI fix from Bjorn Helgaas:
- Quirk Ice Lake Root Ports to work around DPC log size issue (Mika
Westerberg)
* tag 'pci-v6.4-fixes-1' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci:
PCI/DPC: Quirk PIO log size for Intel Ice Lake Root Ports
Pull VFIO fix from Alex Williamson:
- Test for and return error for invalid pfns through the pin pages
interface (Yan Zhao)
* tag 'vfio-v6.4-rc4' of https://github.com/awilliam/linux-vfio:
vfio/type1: check pfn valid before converting to struct page
Pull block fixes from Jens Axboe:
"A few fixes for the storage side of things:
- Fix bio caching condition for passthrough IO (Anuj)
- end-of-device check fix for zero sized devices (Christoph)
- Update Paolo's email address
- NVMe pull request via Keith with a single quirk addition
- Fix regression in how wbt enablement is done (Yu)
- Fix race in active queue accounting (Tian)"
* tag 'block-6.4-2023-05-26' of git://git.kernel.dk/linux:
NVMe: Add MAXIO 1602 to bogus nid list.
block: make bio_check_eod work for zero sized devices
block: fix bio-cache for passthru IO
block, bfq: update Paolo's address in maintainer list
blk-mq: fix race condition in active queue accounting
blk-wbt: fix that wbt can't be disabled by default
Pull io_uring fix from Jens Axboe:
"Just a single fix for the conditional schedule with the SQPOLL thread,
dropping the uring_lock if we do need to reschedule"
* tag 'io_uring-6.4-2023-05-26' of git://git.kernel.dk/linux:
io_uring: unlock sqd->lock before sq thread release CPU
When compiling on a MIPS 64-bit machine we get these warnings:
In file included from ./arch/mips/include/asm/cacheflush.h:13,
from ./include/linux/cacheflush.h:5,
from ./include/linux/highmem.h:8,
from ./include/linux/bvec.h:10,
from ./include/linux/blk_types.h:10,
from ./include/linux/blkdev.h:9,
from fs/btrfs/disk-io.c:7:
fs/btrfs/disk-io.c: In function ‘csum_tree_block’:
fs/btrfs/disk-io.c💯34: error: array subscript 1 is above array bounds of ‘struct page *[1]’ [-Werror=array-bounds]
100 | kaddr = page_address(buf->pages[i]);
| ~~~~~~~~~~^~~
./include/linux/mm.h:2135:48: note: in definition of macro ‘page_address’
2135 | #define page_address(page) lowmem_page_address(page)
| ^~~~
cc1: all warnings being treated as errors
We can check if i overflows to solve the problem. However, this doesn't make
much sense, since i == 1 and num_pages == 1 doesn't execute the body of the loop.
In addition, i < num_pages can also ensure that buf->pages[i] will not cross
the boundary. Unfortunately, this doesn't help with the problem observed here:
gcc still complains.
To fix this add a compile-time condition for the extent buffer page
array size limit, which would eventually lead to eliminating the whole
for loop.
CC: stable@vger.kernel.org # 5.10+
Signed-off-by: pengfuyuan <pengfuyuan@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
This fixes the following warning reported by gcc 10.2.1 under x86_64:
../fs/btrfs/tree-log.c: In function ‘btrfs_log_inode’:
../fs/btrfs/tree-log.c:6211:9: error: ‘last_range_start’ may be used uninitialized in this function [-Werror=maybe-uninitialized]
6211 | ret = insert_dir_log_key(trans, log, path, key.objectid,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
6212 | first_dir_index, last_dir_index);
| ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
../fs/btrfs/tree-log.c:6161:6: note: ‘last_range_start’ was declared here
6161 | u64 last_range_start;
| ^~~~~~~~~~~~~~~~
This might be a false positive fixed in later compiler versions but we
want to have it fixed.
Reported-by: k2ci <kernel-bot@kylinos.cn>
Reviewed-by: Anand Jain <anand.jain@oracle.com>
Signed-off-by: Shida Zhang <zhangshida@kylinos.cn>
Reviewed-by: David Sterba <dsterba@suse.com>
Signed-off-by: David Sterba <dsterba@suse.com>
When I implemented the storage layer bio splitting, I was under the
assumption that we'll never split metadata bios. But Qu reminded me that
this can actually happen with very old file systems with unaligned
metadata chunks and RAID0.
I still haven't seen such a case in practice, but we better handled this
case, especially as it is fairly easily to do not calling the ->end_іo
method directly in btrfs_end_io_work, and using the proper
btrfs_orig_bbio_end_io helper instead.
In addition to the old file system with unaligned metadata chunks case
documented in the commit log, the combination of the new scrub code
with Johannes pending raid-stripe-tree also triggers this case. We
spent some time debugging it and found that this patch solves
the problem.
Fixes: 103c19723c ("btrfs: split the bio submission path into a separate file")
CC: stable@vger.kernel.org # 6.3+
Reviewed-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Tested-by: Johannes Thumshirn <johannes.thumshirn@wdc.com>
Signed-off-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: David Sterba <dsterba@suse.com>
Pull thermal control fix from Rafael Wysocki:
"Fix a regression introduced inadvertently during the 6.3 cycle by a
commit making the Intel int340x thermal driver use sysfs_emit_at()
instead of scnprintf() (Srinivas Pandruvada)"
* tag 'thermal-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: intel: int340x: Add new line for UUID display
Pull power management fixes from Rafael Wysocki:
"Fix three issues related to the ->fast_switch callback in the AMD
P-state cpufreq driver (Gautham R. Shenoy and Wyes Karny)"
* tag 'pm-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpufreq: amd-pstate: Update policy->cur in amd_pstate_adjust_perf()
cpufreq: amd-pstate: Remove fast_switch_possible flag from active driver
cpufreq: amd-pstate: Add ->fast_switch() callback
When media is not ready do not assume that the capacity information from
the identify command is valid, i.e. ->total_bytes
->partition_align_bytes ->{volatile,persistent}_only_bytes. Explicitly
zero out the capacity resources and exit early.
Given zero-init of those fields this patch is functionally equivalent to
the prior state, but it improves readability and robustness going
forward.
Signed-off-by: Dave Jiang <dave.jiang@intel.com>
Link: https://lore.kernel.org/r/168506118166.3004974.13523455340007852589.stgit@djiang5-mobl3
Signed-off-by: Dan Williams <dan.j.williams@intel.com>
Pull gpio fixes from Bartosz Golaszewski:
- fix incorrect output in in-tree gpio tools
- fix a shell coding issue in gpio-sim selftests
- correctly set the permissions for debugfs attributes exposed by
gpio-mockup
- fix chip name and pin count in gpio-f7188x for one of the supported
models
- fix numberspace pollution when using dynamically and statically
allocated GPIOs together
* tag 'gpio-fixes-for-v6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
gpio-f7188x: fix chip name and pin count on Nuvoton chip
gpiolib: fix allocation of mixed dynamic/static GPIOs
gpio: mockup: Fix mode of debugfs files
selftests: gpio: gpio-sim: Fix BUG: test FAILED due to recent change
tools: gpio: fix debounce_period_us output of lsgpio
Pull btrfs fixes from David Sterba:
- handle memory allocation error in checksumming helper (reported by
syzbot)
- fix lockdep splat when aborting a transaction, add NOFS protection
around invalidate_inode_pages2 that could allocate with GFP_KERNEL
- reduce chances to hit an ENOSPC during scrub with RAID56 profiles
* tag 'for-6.4-rc3-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: use nofs when cleaning up aborted transactions
btrfs: handle memory allocation failure in btrfs_csum_one_bio
btrfs: scrub: try harder to mark RAID56 block groups read-only
Pull drm fixes from Dave Airlie:
"This week's collection is pretty spread out, accel/qaic has a bunch of
fixes, amdgpu, then lots of single fixes across a bunch of places.
core:
- fix drmm_mutex_init lock class
mgag200:
- fix gamma lut initialisation
pl111:
- fix FB depth on IMPD-1 framebuffer
amdgpu:
- Fix missing BO unlocking in KIQ error path
- Avoid spurious secure display error messages
- SMU13 fix
- Fix an OD regression
- GPU reset display IRQ warning fix
- MST fix
radeon:
- Fix a DP regression
i915:
- PIPEDMC disabling fix for bigjoiner config
panel:
- fix aya neo air plus quirk
sched:
- remove redundant NULL check
qaic:
- fix NNC message corruption
- Grab ch_lock during QAIC_ATTACH_SLICE_BO
- Flush the transfer list again
- Validate if BO is sliced before slicing
- Validate user data before grabbing any lock
- initialize ret variable to 0
- silence some uninitialized variable warnings"
* tag 'drm-fixes-2023-05-26' of git://anongit.freedesktop.org/drm/drm:
drm/amd/display: Have Payload Properly Created After Resume
drm/amd/display: Fix warning in disabling vblank irq
drm/amd/pm: Fix output of pp_od_clk_voltage
drm/amd/pm: add missing NotifyPowerSource message mapping for SMU13.0.7
drm/radeon: reintroduce radeon_dp_work_func content
drm/amdgpu: don't enable secure display on incompatible platforms
drm:amd:amdgpu: Fix missing buffer object unlock in failure path
accel/qaic: Fix NNC message corruption
accel/qaic: Grab ch_lock during QAIC_ATTACH_SLICE_BO
accel/qaic: Flush the transfer list again
accel/qaic: Validate if BO is sliced before slicing
accel/qaic: Validate user data before grabbing any lock
accel/qaic: initialize ret variable to 0
drm/i915: Fix PIPEDMC disabling for a bigjoiner configuration
drm: fix drmm_mutex_init()
drm/sched: Remove redundant check
drm: panel-orientation-quirks: Change Air's quirk to support Air Plus
accel/qaic: silence some uninitialized variable warnings
drm/pl111: Fix FB depth on IMPD-1 framebuffer
drm/mgag200: Fix gamma lut not initialized.
I tried to streamline our user memory copy code fairly aggressively in
commit adfcf4231b ("x86: don't use REP_GOOD or ERMS for user memory
copies"), in order to then be able to clean up the code and inline the
modern FSRM case in commit 577e6a7fd5 ("x86: inline the 'rep movs' in
user copies for the FSRM case").
We had reports [1] of that causing regressions earlier with blogbench,
but that turned out to be a horrible benchmark for that case, and not a
sufficient reason for re-instating "rep movsb" on older machines.
However, now Eric Dumazet reported [2] a regression in performance that
seems to be a rather more real benchmark, where due to the removal of
"rep movs" a TCP stream over a 100Gbps network no longer reaches line
speed.
And it turns out that with the simplified the calling convention for the
non-FSRM case in commit 427fda2c8a ("x86: improve on the non-rep
'copy_user' function"), re-introducing the ERMS case is actually fairly
simple.
Of course, that "fairly simple" is glossing over several missteps due to
having to fight our assembler alternative code. This code really wanted
to rewrite a conditional branch to have two different targets, but that
made objtool sufficiently unhappy that this instead just ended up doing
a choice between "jump to the unrolled loop, or use 'rep movsb'
directly".
Let's see if somebody finds a case where the kernel memory copies also
care (see commit 68674f94ff: "x86: don't use REP_GOOD or ERMS for
small memory copies"). But Eric does argue that the user copies are
special because networking tries to copy up to 32KB at a time, if
order-3 pages allocations are possible.
In-kernel memory copies are typically small, unless they are the special
"copy pages at a time" kind that still use "rep movs".
Link: https://lore.kernel.org/lkml/202305041446.71d46724-yujie.liu@intel.com/ [1]
Link: https://lore.kernel.org/lkml/CANn89iKUbyrJ=r2+_kK+sb2ZSSHifFZ7QkPLDpAtkJ8v4WUumA@mail.gmail.com/ [2]
Reported-and-tested-by: Eric Dumazet <edumazet@google.com>
Fixes: adfcf4231b ("x86: don't use REP_GOOD or ERMS for user memory copies")
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
'struct evsel' uses a union for the two lists. This turned out to be
error prone.
For example:
[root@quaco ~]# perf stat --bpf-prog 5246
Error: cpu-clock event does not have sample flags 66c660
failed to set filter "(null)" on event cpu-clock with 2 (No such file or directory)
[root@quaco ~]# perf stat --bpf-prog 5246
Fix this issue by separating the two lists.
Fixes: 56ec9457a4 ("perf bpf filter: Implement event sample filtering")
Signed-off-by: Song Liu <song@kernel.org>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: kernel-team@meta.com
Link: https://lore.kernel.org/r/20230519235757.3613719-1-song@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
llvm-strip is not really required. Remove this dependency to make it
easier to build perf with BUILD_BPF_SKEL=1.
Committer notes:
This removes the need for the 'llvm' package just to get llvm-strip.
Reported-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Song Liu <song@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Pull NVMe fix from Keith:
"nvme fixes for 6.4
One nvme quirk (Tatsuki)"
* tag 'nvme-6.4-2023-05-26' of git://git.infradead.org/nvme:
NVMe: Add MAXIO 1602 to bogus nid list.
