[Why]
For FreeSync HDR, native color space flag in AMD VSIF(BT.709) should be
used when intepreting content and color space flag in VSC or AVI
infoFrame should be ignored. However, it turned out some userspace
application still use color flag in VSC or AVI infoFrame which is
incorrect.
[How]
Transfer function is used when building the VSC and AVI infoFrame. Set
colorimetry to BT.709 when all the following match:
1. Pixel format is YCbCr;
2. In FreeSync 2 HDR, color is COLOR_SPACE_2020_YCBCR;
3. Transfer function is TRANSFER_FUNC_GAMMA_22;
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Ma Hanghong <hanghong.ma@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Now dynamic ODM will now be disabled when MPO is required safe
transitions to avoid underflow, but we are triggering the way of minimal
transition too often. Commit state of dc with no check will do pipeline
setup which may re-initialize the component with no need such as audio.
[HOW]
Just do the minimal transition when all of pipes are in use, otherwise
return true to skip.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Dillon Varone <Dillon.Varone@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: zhikzhai <zhikai.zhai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Skipping vblank during global sync update request can result in
underflow on certain displays.
[HOW]
Roll back to the previous behavior where DC waits for vblank during pipe
programming.
Fixes: 5d3e144214 ("drm/amd/display: do not wait for vblank during pipe programming")
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Martin Leung <Martin.Leung@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Haiyi Zhou <Haiyi.Zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On some linux based OS, the hotplug->HDCP start takes longer than
4seconds (by ~100ms) This is due to the HDCP delay (3 sec) so we only
have 1 second to hotplug->stream enablement, which is not enough for
certain OS configs.
[How]
Change the Delay to 0 seconds. From testing it seems like 0 Seconds can
pass 1.x and 2.x compliances
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Aurabindo Pillai <Aurabindo.Pillai@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
reuse struct rect rather than adding a new struct.
[How]
- Userspace keeps inputting x_start, y_start, x_end, y_end
- We translate data to x, y, width, height in code flow to store
- translate back to x_start, y_start, x_end, y_end before programming HW
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Porting secure display feature from DCN10 to DCN21. Support single
display for now and will extend to multiple displays.
[How]
- use workqueue to offload works for dmub or dmcu firmware
- after receiving ROI update from userspace, set skip_frame_cnt to 1
- refactor amdgpu_dm_crtc_handle_crc_window_irq()
- disable PSR before activating secure_display on a crtc
- check if secure_display is activated before enabling psr
- only work for single display for now.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wayne Lin <Wayne.Lin@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alan Liu <HaoPing.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This file was split in commit 5d945cbcd4
("drm/amd/display: Create a file dedicated to planes") and the logic in
dm_plane_format_mod_supported() function got changed by a switch logic.
That change broke drm_plane modifiers setting on series 5000 APUs
(tested on OXP mini AMD 5800U and HP Dev One 5850U PRO)
leading to Gamescope not working as reported on GitHub[1]
To reproduce the issue, enter a TTY and run:
$ gamescope -- vkcube
With said commit applied it will abort. This one restores the old logic,
fixing the issue that affects Gamescope.
[1](https://github.com/Plagman/gamescope/issues/624)
Cc: <stable@vger.kernel.org> # 6.0.x
Signed-off-by: Joaquín Ignacio Aramendía <samsagax@gmail.com>
Reviewed-by: Bas Nieuwenhuizen <bas@basnieuwenhuizen.nl>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
Read set_power_state dpcd after HPD cause USB4 CTS 4.2.1.1
[How]
Read LTTPR caps first. If aux channel not ready, wake up aux channel.
If wake up aux channel return pass, retrieve lttpr caps again. If wake
up aux channel return false, register a detection retry timer.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Lewis Huang <Lewis.Huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
VPG doesn't have the ability to mute audio output by sending all 0s in
audio SDP. The existing implemention is disabling audio SDP instead.
This is same as what dp_audio_enable does. Since it is no longer
referenced by any callers, we decided to remove this interface for
simplicity.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
1. As recommended by hardware team, don't enable APG when stream is not
enabled.
2. Move audio stream encoder programming into link_hwss.
[how]
1. Merge dp_audio_enable into enable audio stream hw sequence.
2. Move stream encoder programming into link hwss level to unify stream
encoder programming interface.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of the programming expectation for using DML functions, DC
requires that any DML function invoked outside DML uses:
DC_FP_START();
... dml function ...
DC_FP_END();
Additionally, all the DML functions that can be invoked outside the DML
folder call the function dc_assert_fp_enabled(), which is responsible
for triggering a warning in the case that the DML function was not
guarded by the DC_FP_START/END. For this reason, call DC_FP_START/END
inside DML is wrong, and this commit removes all of those references.
Tested-by: Mark Broadworth <mark.broadworth@amd.com>
Reviewed-by: Nevenko Stupar <Nevenko.Stupar@amd.com>
Reviewed-by: Jun Lei <Jun.Lei@amd.com>
Acked-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
In the S2idle suspend/resume phase the gfxoff is keeping functional so
some IP blocks will be likely to reinitialize at gfxoff entry and that
will result in failing to program GC registers.Therefore, let disallow
gfxoff until AMDGPU IPs reinitialized completely.
Signed-off-by: Prike Liang <Prike.Liang@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
IMU is a new firmware for GFX11.
There are four means by which firmware version can be queried
from the driver: device attributes, vf2pf, debugfs,
and the AMDGPU_INFO_FW_VERSION option in the amdgpu info ioctl.
Add IMU as an option for those four methods.
V2: Added debugfs
Reviewed-by: Likun Gao <Likun.Gao@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: David Francis <David.Francis@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The symbol is not used outside of the file, so mark it static.
Fixes the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mpc.c:985:24: warning:
symbol 'dcn32_mpc_funcs' was not declared. Should it be static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The symbol is not used outside of the file, so mark it static.
Fixes the following warning:
drivers/gpu/drm/amd/amdgpu/../display/dc/dcn32/dcn32_mmhubbub.c:214:28:
warning: symbol 'dcn32_mmhubbub_funcs' was
not declared. Should it be static?
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
These symbols qp_table_422_10bpc_min, qp_table_444_8bpc_max,
qp_table_420_12bpc_max, qp_table_444_10bpc_min, qp_table_420_8bpc_max,
qp_table_444_8bpc_min, qp_table_444_12bpc_min, qp_table_420_12bpc_min,
qp_table_422_12bpc_min, qp_table_422_12bpc_max, qp_table_444_12bpc_max,
qp_table_420_8bpc_min, qp_table_422_8bpc_min, qp_table_422_10bpc_max,
qp_table_420_10bpc_max, qp_table_420_10bpc_min, qp_table_444_10bpc_max,
qp_table_422_8bpc_max are not used outside of the file,
so mark them static.
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:28:18: warning:
symbol 'qp_table_422_10bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:61:18: warning:
symbol 'qp_table_444_8bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:102:18: warning:
symbol 'qp_table_420_12bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:135:18: warning:
symbol 'qp_table_444_10bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:188:18: warning:
symbol 'qp_table_420_8bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:209:18: warning:
symbol 'qp_table_444_8bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:250:18: warning:
symbol 'qp_table_444_12bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:315:18: warning:
symbol 'qp_table_420_12bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:348:18: warning:
symbol 'qp_table_422_12bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:389:18: warning:
symbol 'qp_table_422_12bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:430:18: warning:
symbol 'qp_table_444_12bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:495:18: warning:
symbol 'qp_table_420_8bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:516:18: warning:
symbol 'qp_table_422_8bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:541:18: warning:
symbol 'qp_table_422_10bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:574:16: warning:
symbol 'qp_table_420_10bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:601:18: warning:
symbol 'qp_table_420_10bpc_min' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:628:18: warning:
symbol 'qp_table_444_10bpc_max' was not declared. Should it be static?
./drivers/gpu/drm/amd/amdgpu/../display/dc/dml/dsc/qp_tables.h:681:18: warning:
symbol 'qp_table_422_8bpc_max' was not declared. Should it be static?
Signed-off-by: ruanjinjie <ruanjinjie@huawei.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Commit 8795e182b0 ("PCI/portdrv: Don't disable AER reporting in get_port_device_capability()")
uncovered a bug in amdgpu that required a reordering of the driver
init sequence to avoid accessing a special register on the GPU
before it was properly set up leading to an PCI AER error. This
reordering uncovered a different hw programming ordering dependency
in some APUs where the SDMA doorbells need to be programmed before
the GFX doorbells. To fix this, move the SDMA doorbell programming
back into the soc15 common code, but use the actual doorbell range
values directly rather than the values stored in the ring structure
since those will not be initialized at this point.
This is a partial revert, but with the doorbell assignment
fixed so the proper doorbell index is set before it's used.
Fixes: e3163bc8ff ("drm/amdgpu: move nbio sdma_doorbell_range() into sdma code for vega")
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: skhan@linuxfoundation.org
When using a device based on DCN32/321,
we have an issue where a second
4k@60Hz display does not light up,
and the system becomes unresponsive
for a few minutes. In the debug process,
it was possible to see a hang
in the function dcn20_post_unlock_program_front_end
in this part:
for (j = 0; j < TIMEOUT_FOR_PIPE_ENABLE_MS*1000
&& hubp->funcs->hubp_is_flip_pending(hubp); j++)
mdelay(1);
}
The hubp_is_flip_pending always returns positive
for waiting pending flips which is a symptom of
pipe hang. Additionally, the dmesg log shows
this message after a few minutes:
BUG: soft lockup - CPU#4 stuck for 26s!
...
[ +0.000003] dcn20_post_unlock_program_front_end+0x112/0x340 [amdgpu]
[ +0.000171] dc_commit_state_no_check+0x63d/0xbf0 [amdgpu]
[ +0.000155] ? dc_validate_global_state+0x358/0x3d0 [amdgpu]
[ +0.000154] dc_commit_state+0xe2/0xf0 [amdgpu]
This confirmed the hypothesis that we had a pipe
hanging somewhere. Next, after checking the
ftrace entries, we have the below weird
sequence:
[..]
2) | dcn10_lock_all_pipes [amdgpu]() {
2) 0.120 us | optc1_is_tg_enabled [amdgpu]();
2) | dcn20_pipe_control_lock [amdgpu]() {
2) | dc_dmub_srv_clear_inbox0_ack [amdgpu]() {
2) 0.121 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.551 us | }
2) | dc_dmub_srv_send_inbox0_cmd [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_write [amdgpu]();
2) 0.511 us | }
2) | dc_dmub_srv_wait_for_inbox0_ack [amdgpu]() {
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
2) 0.110 us | amdgpu_dm_dmub_reg_read [amdgpu]();
[..]
We are not expected to read from dmub register
so many times and for so long. From the trace log,
it was possible to identify that the function
dcn20_pipe_control_lock was triggering the dmub
operation when it was unnecessary and causing
the hang issue. This commit drops the unnecessary
dmub code and, consequently, fixes the second display not
lighting up the issue.
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Acked-by: Qingqing Zhuo <qingqing.zhuo@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Sub-viewport (Subvp) feature is used for changing MCLK without causing
any display artifact, requiring special treatment from the plane and
stream perspective since DC needs to read data from the cache when using
subvp. However, the function dc_commit_updates_for_stream does not
provide all the support needed by this feature which will make this
function legacy at some point. For this reason, this commit enables
dc_update_planes_and_stream for ASICs that support this feature but
preserves the old behavior for other ASICs. However,
dc_update_planes_and_stream should replace dc_commit_updates_for_stream
for all ASICs since it does most of the tasks executed by
dc_commit_updates_for_stream with other extra operations, but we need to
run tests before making this change.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Rodrigo Siqueira <Rodrigo.Siqueira@amd.com>
Co-developed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
