Chris Mason reported a performance regression on big iron. Reports of
this kind were usually reported as part of a micro benchmark but Chris'
test did mimic his real workload. This makes it a real regression.
The root cause is rcuref_get() which is invoked during each futex
operation. If all threads of an application do this simultaneously then
it leads to cache line bouncing and the performance drops.
Disable FUTEX_PRIVATE_HASH entirely for this cycle. The performance
regression will be addressed in the following cycle enabling the option
again.
Closes: https://lore.kernel.org/all/3ad05298-351e-4d61-9972-ca45a0a50e33@meta.com/
Reported-by: Chris Mason <clm@meta.com>
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250630145034.8JnINEaS@linutronix.de
Trying to compile an x86 kernel on big endian results in this error:
net/ipv4/netfilter/iptable_nat.o: warning: objtool: iptable_nat_table_init+0x150: Unknown annotation type: 50331648
make[5]: *** [scripts/Makefile.build:287: net/ipv4/netfilter/iptable_nat.o] Error 255
Reason is a missing endian conversion in read_annotate().
Add the missing conversion to fix this.
Fixes: 2116b349e2 ("objtool: Generic annotation infrastructure")
Signed-off-by: Heiko Carstens <hca@linux.ibm.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lkml.kernel.org/r/20250630131230.4130185-1-hca@linux.ibm.com
On Mon, Jun 02, 2025 at 03:22:13PM +0800, Kuyo Chang wrote:
> So, the potential race scenario is:
>
> CPU0 CPU1
> // doing migrate_swap(cpu0/cpu1)
> stop_two_cpus()
> ...
> // doing _cpu_down()
> sched_cpu_deactivate()
> set_cpu_active(cpu, false);
> balance_push_set(cpu, true);
> cpu_stop_queue_two_works
> __cpu_stop_queue_work(stopper1,...);
> __cpu_stop_queue_work(stopper2,..);
> stop_cpus_in_progress -> true
> preempt_enable();
> ...
> 1st balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 1st add push_work
> wake_up_q(&wakeq); -> "wakeq is empty.
> This implies that the stopper is at wakeq@migrate_swap."
> preempt_disable
> wake_up_q(&wakeq);
> wake_up_process // wakeup migrate/0
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond ->meet below case
> if (cpu == smp_processor_id())
> return false;
> ttwu_do_activate
> //migrate/0 wakeup done
> wake_up_process // wakeup migrate/1
> try_to_wake_up
> ttwu_queue
> ttwu_queue_cond
> ttwu_queue_wakelist
> __ttwu_queue_wakelist
> __smp_call_single_queue
> preempt_enable();
>
> 2nd balance_push
> stop_one_cpu_nowait
> cpu_stop_queue_work
> __cpu_stop_queue_work
> list_add_tail -> 2nd add push_work, so the double list add is detected
> ...
> ...
> cpu1 get ipi, do sched_ttwu_pending, wakeup migrate/1
>
So this balance_push() is part of schedule(), and schedule() is supposed
to switch to stopper task, but because of this race condition, stopper
task is stuck in WAKING state and not actually visible to be picked.
Therefore CPU1 can do another schedule() and end up doing another
balance_push() even though the last one hasn't been done yet.
This is a confluence of fail, where both wake_q and ttwu_wakelist can
cause crucial wakeups to be delayed, resulting in the malfunction of
balance_push.
Since there is only a single stopper thread to be woken, the wake_q
doesn't really add anything here, and can be removed in favour of
direct wakeups of the stopper thread.
Then add a clause to ttwu_queue_cond() to ensure the stopper threads
are never queued / delayed.
Of all 3 moving parts, the last addition was the balance_push()
machinery, so pick that as the point the bug was introduced.
Fixes: 2558aacff8 ("sched/hotplug: Ensure only per-cpu kthreads run during hotplug")
Reported-by: Kuyo Chang <kuyo.chang@mediatek.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Tested-by: Kuyo Chang <kuyo.chang@mediatek.com>
Link: https://lkml.kernel.org/r/20250605100009.GO39944@noisy.programming.kicks-ass.net
MEI GSC interrupt comes from i915. It has top half and bottom half.
Top half is called from i915 interrupt handler. It should be in
irq disabled context.
With RT kernel, by default i915 IRQ handler is in threaded IRQ. MEI GSC
top half might be in threaded IRQ context. generic_handle_irq_safe API
could be called from either IRQ or process context, it disables local
IRQ then calls MEI GSC interrupt top half.
This change fixes A380/A770 GPU boot hang issue with RT kernel.
Fixes: 1e3dc1d862 ("drm/i915/gsc: add gsc as a mei auxiliary device")
Tested-by: Furong Zhou <furong.zhou@intel.com>
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Acked-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Junxiao Chang <junxiao.chang@intel.com>
Link: https://lore.kernel.org/r/20250425151108.643649-1-junxiao.chang@intel.com
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
(cherry picked from commit dccf655f69)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
The following error has been reported sporadically by CI when a test
unbinds the i915 driver on a ring submission platform:
<4> [239.330153] ------------[ cut here ]------------
<4> [239.330166] i915 0000:00:02.0: [drm] drm_WARN_ON(dev_priv->mm.shrink_count)
<4> [239.330196] WARNING: CPU: 1 PID: 18570 at drivers/gpu/drm/i915/i915_gem.c:1309 i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330640] RIP: 0010:i915_gem_cleanup_early+0x13e/0x150 [i915]
...
<4> [239.330942] Call Trace:
<4> [239.330944] <TASK>
<4> [239.330949] i915_driver_late_release+0x2b/0xa0 [i915]
<4> [239.331202] i915_driver_release+0x86/0xa0 [i915]
<4> [239.331482] devm_drm_dev_init_release+0x61/0x90
<4> [239.331494] devm_action_release+0x15/0x30
<4> [239.331504] release_nodes+0x3d/0x120
<4> [239.331517] devres_release_all+0x96/0xd0
<4> [239.331533] device_unbind_cleanup+0x12/0x80
<4> [239.331543] device_release_driver_internal+0x23a/0x280
<4> [239.331550] ? bus_find_device+0xa5/0xe0
<4> [239.331563] device_driver_detach+0x14/0x20
...
<4> [357.719679] ---[ end trace 0000000000000000 ]---
If the test also unloads the i915 module then that's followed with:
<3> [357.787478] =============================================================================
<3> [357.788006] BUG i915_vma (Tainted: G U W N ): Objects remaining on __kmem_cache_shutdown()
<3> [357.788031] -----------------------------------------------------------------------------
<3> [357.788204] Object 0xffff888109e7f480 @offset=29824
<3> [357.788670] Allocated in i915_vma_instance+0xee/0xc10 [i915] age=292729 cpu=4 pid=2244
<4> [357.788994] i915_vma_instance+0xee/0xc10 [i915]
<4> [357.789290] init_status_page+0x7b/0x420 [i915]
<4> [357.789532] intel_engines_init+0x1d8/0x980 [i915]
<4> [357.789772] intel_gt_init+0x175/0x450 [i915]
<4> [357.790014] i915_gem_init+0x113/0x340 [i915]
<4> [357.790281] i915_driver_probe+0x847/0xed0 [i915]
<4> [357.790504] i915_pci_probe+0xe6/0x220 [i915]
...
Closer analysis of CI results history has revealed a dependency of the
error on a few IGT tests, namely:
- igt@api_intel_allocator@fork-simple-stress-signal,
- igt@api_intel_allocator@two-level-inception-interruptible,
- igt@gem_linear_blits@interruptible,
- igt@prime_mmap_coherency@ioctl-errors,
which invisibly trigger the issue, then exhibited with first driver unbind
attempt.
All of the above tests perform actions which are actively interrupted with
signals. Further debugging has allowed to narrow that scope down to
DRM_IOCTL_I915_GEM_EXECBUFFER2, and ring_context_alloc(), specific to ring
submission, in particular.
If successful then that function, or its execlists or GuC submission
equivalent, is supposed to be called only once per GEM context engine,
followed by raise of a flag that prevents the function from being called
again. The function is expected to unwind its internal errors itself, so
it may be safely called once more after it returns an error.
In case of ring submission, the function first gets a reference to the
engine's legacy timeline and then allocates a VMA. If the VMA allocation
fails, e.g. when i915_vma_instance() called from inside is interrupted
with a signal, then ring_context_alloc() fails, leaving the timeline held
referenced. On next I915_GEM_EXECBUFFER2 IOCTL, another reference to the
timeline is got, and only that last one is put on successful completion.
As a consequence, the legacy timeline, with its underlying engine status
page's VMA object, is still held and not released on driver unbind.
Get the legacy timeline only after successful allocation of the context
engine's VMA.
v2: Add a note on other submission methods (Krzysztof Karas):
Both execlists and GuC submission use lrc_alloc() which seems free
from a similar issue.
Fixes: 75d0a7f31e ("drm/i915: Lift timeline into intel_context")
Closes: https://gitlab.freedesktop.org/drm/i915/kernel/-/issues/12061
Cc: Chris Wilson <chris.p.wilson@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Krzysztof Karas <krzysztof.karas@intel.com>
Reviewed-by: Sebastian Brzezinka <sebastian.brzezinka@intel.com>
Reviewed-by: Krzysztof Niemiec <krzysztof.niemiec@intel.com>
Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Nitin Gote <nitin.r.gote@intel.com>
Reviewed-by: Andi Shyti <andi.shyti@linux.intel.com>
Signed-off-by: Andi Shyti <andi.shyti@linux.intel.com>
Link: https://lore.kernel.org/r/20250611104352.1014011-2-janusz.krzysztofik@linux.intel.com
(cherry picked from commit cc43422b3c)
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- MGMT: set_mesh: update LE scan interval and window
- MGMT: mesh_send: check instances prior disabling advertising
- hci_sync: revert some mesh modifications
- hci_sync: Set extended advertising data synchronously
- hci_sync: Prevent unintended pause by checking if advertising is active
* tag 'for-net-2025-06-27' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: HCI: Set extended advertising data synchronously
Bluetooth: MGMT: mesh_send: check instances prior disabling advertising
Bluetooth: MGMT: set_mesh: update LE scan interval and window
Bluetooth: hci_sync: revert some mesh modifications
Bluetooth: Prevent unintended pause by checking if advertising is active
====================
Link: https://patch.msgid.link/20250627181601.520435-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull io_uring fix from Jens Axboe:
"Now that anonymous inodes set S_IFREG, this breaks the io_uring
read/write retries for short reads/writes. As things like timerfd and
eventfd are anon inodes, applications that previously did:
unsigned long event_data[2];
io_uring_prep_read(sqe, evfd, event_data, sizeof(event_data), 0);
and just got a short read when 1 event was posted, will now wait for
the full amount before posting a completion.
This caused issues for the ghostty application, making it basically
unusable due to excessive buffering"
* tag 'io_uring-6.16-20250630' of git://git.kernel.dk/linux:
io_uring: gate REQ_F_ISREG on !S_ANON_INODE as well
When using Secure TSC, the GUEST_TSC_FREQ MSR reports a frequency based on
the nominal P0 frequency, which deviates slightly (typically ~0.2%) from
the actual mean TSC frequency due to clocking parameters.
Over extended VM uptime, this discrepancy accumulates, causing clock skew
between the hypervisor and a SEV-SNP VM, leading to early timer interrupts as
perceived by the guest.
The guest kernel relies on the reported nominal frequency for TSC-based
timekeeping, while the actual frequency set during SNP_LAUNCH_START may
differ. This mismatch results in inaccurate time calculations, causing the
guest to perceive hrtimers as firing earlier than expected.
Utilize the TSC_FACTOR from the SEV firmware's secrets page (see "Secrets
Page Format" in the SNP Firmware ABI Specification) to calculate the mean
TSC frequency, ensuring accurate timekeeping and mitigating clock skew in
SEV-SNP VMs.
Use early_ioremap_encrypted() to map the secrets page as
ioremap_encrypted() uses kmalloc() which is not available during early TSC
initialization and causes a panic.
[ bp: Drop the silly dummy var:
https://lore.kernel.org/r/20250630192726.GBaGLlHl84xIopx4Pt@fat_crate.local ]
Fixes: 73bbf3b0fb ("x86/tsc: Init the TSC for Secure TSC guests")
Signed-off-by: Nikunj A Dadhania <nikunj@amd.com>
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Cc: stable@vger.kernel.org
Link: https://lore.kernel.org/20250630081858.485187-1-nikunj@amd.com
Today, a few work structs inside tcon are initialized inside
cifs_get_tcon and not in tcon_info_alloc. As a result, if a tcon
is obtained from tcon_info_alloc, but not called as a part of
cifs_get_tcon, we may trip over.
Cc: <stable@vger.kernel.org>
Signed-off-by: Shyam Prasad N <sprasad@microsoft.com>
Reviewed-by: Paulo Alcantara (Red Hat) <pc@manguebit.org>
Signed-off-by: Steve French <stfrench@microsoft.com>
PL1 cannot be disabled on some platforms. The ENABLE bit is still set
after software clears it. This behavior leads to a scenario where, upon
user request to disable the Power Limit through the powercap sysfs, the
ENABLE bit remains set while the CLAMPING bit is inadvertently cleared.
According to the Intel Software Developer's Manual, the CLAMPING bit,
"When set, allows the processor to go below the OS requested P states in
order to maintain the power below specified Platform Power Limit value."
Thus this means the system may operate at higher power levels than
intended on such platforms.
Enhance the code to check ENABLE bit after writing to it, and stop
further processing if ENABLE bit cannot be changed.
Reported-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Fixes: 2d281d8196 ("PowerCap: Introduce Intel RAPL power capping driver")
Cc: All applicable <stable@vger.kernel.org>
Signed-off-by: Zhang Rui <rui.zhang@intel.com>
Link: https://patch.msgid.link/20250619071340.384782-1-rui.zhang@intel.com
[ rjw: Use str_enabled_disabled() instead of open-coded equivalent ]
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
[WHY]
Rounding error sometimes occurs when the refresh rate is equal to a panel's
max refresh rate, causing HDMI compliance failures.
[HOW]
Added a case so that we round up to avoid v_total_min to be below a panel's
minimum bound.
Reviewed-by: Jun Lei <jun.lei@amd.com>
Signed-off-by: Harold Sun <Harold.Sun@amd.com>
Signed-off-by: Ray Wu <ray.wu@amd.com>
Tested-by: Daniel Wheeler <daniel.wheeler@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit fe7645d22b)
patch dd64956685 ("drm/amdgpu: Remove duplicated "context still
alive" check") removed ctx put, which will cause amdgpu_ctx_fini()
cannot be called and then cause some finished fence that added by
amdgpu_ctx_add_fence() cannot be released and cause memleak.
Fixes: dd64956685 ("drm/amdgpu: Remove duplicated "context still alive" check")
Signed-off-by: Lin.Cao <lincao12@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 8cf66089e2)
Cc: stable@vger.kernel.org
If the process is exiting, the mmput inside mmu notifier callback from
compactd or fork or numa balancing could release the last reference
of mm struct to call exit_mmap and free_pgtable, this triggers deadlock
with below backtrace.
The deadlock will leak kfd process as mmu notifier release is not called
and cause VRAM leaking.
The fix is to take mm reference mmget_non_zero when adding prange to the
deferred list to pair with mmput in deferred list work.
If prange split and add into pchild list, the pchild work_item.mm is not
used, so remove the mm parameter from svm_range_unmap_split and
svm_range_add_child.
The backtrace of hung task:
INFO: task python:348105 blocked for more than 64512 seconds.
Call Trace:
__schedule+0x1c3/0x550
schedule+0x46/0xb0
rwsem_down_write_slowpath+0x24b/0x4c0
unlink_anon_vmas+0xb1/0x1c0
free_pgtables+0xa9/0x130
exit_mmap+0xbc/0x1a0
mmput+0x5a/0x140
svm_range_cpu_invalidate_pagetables+0x2b/0x40 [amdgpu]
mn_itree_invalidate+0x72/0xc0
__mmu_notifier_invalidate_range_start+0x48/0x60
try_to_unmap_one+0x10fa/0x1400
rmap_walk_anon+0x196/0x460
try_to_unmap+0xbb/0x210
migrate_page_unmap+0x54d/0x7e0
migrate_pages_batch+0x1c3/0xae0
migrate_pages_sync+0x98/0x240
migrate_pages+0x25c/0x520
compact_zone+0x29d/0x590
compact_zone_order+0xb6/0xf0
try_to_compact_pages+0xbe/0x220
__alloc_pages_direct_compact+0x96/0x1a0
__alloc_pages_slowpath+0x410/0x930
__alloc_pages_nodemask+0x3a9/0x3e0
do_huge_pmd_anonymous_page+0xd7/0x3e0
__handle_mm_fault+0x5e3/0x5f0
handle_mm_fault+0xf7/0x2e0
hmm_vma_fault.isra.0+0x4d/0xa0
walk_pmd_range.isra.0+0xa8/0x310
walk_pud_range+0x167/0x240
walk_pgd_range+0x55/0x100
__walk_page_range+0x87/0x90
walk_page_range+0xf6/0x160
hmm_range_fault+0x4f/0x90
amdgpu_hmm_range_get_pages+0x123/0x230 [amdgpu]
amdgpu_ttm_tt_get_user_pages+0xb1/0x150 [amdgpu]
init_user_pages+0xb1/0x2a0 [amdgpu]
amdgpu_amdkfd_gpuvm_alloc_memory_of_gpu+0x543/0x7d0 [amdgpu]
kfd_ioctl_alloc_memory_of_gpu+0x24c/0x4e0 [amdgpu]
kfd_ioctl+0x29d/0x500 [amdgpu]
Fixes: fa582c6f36 ("drm/amdkfd: Use mmget_not_zero in MMU notifier")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit a29e067bd3)
Cc: stable@vger.kernel.org
Set memory mtype to UC host memory when ext-coherent
flag is set and memory is registered as a SVM allocation.
Reviewed-by: Amber Lin <Amber.Lin@amd.com>
Signed-off-by: David Yat Sin <David.YatSin@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 5d14fdab47)
SDMA 5.x only supports engine soft reset which resets
all queues on the engine. As such, we need to suspend
KFD queues around resets like we do for SDMA 4.x.
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
(cherry picked from commit 61feed0baa)
The apple driver relies on being able to directly find the matching root
port structure from the platform device that represents this port.
A previous hack stashed a pointer to the root port structure in the config
window private pointer, but that ended up relying on assumptions that break
other drivers.
Instead, bite the bullet and track the association as part of the driver
itself as a list of probed root ports.
Signed-off-by: Marc Zyngier <maz@kernel.org>
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Geert Uytterhoeven <geert+renesas@glider.be>
Link: https://patch.msgid.link/20250625111806.4153773-3-maz@kernel.org
Perform fix similar to the one in the commit 85e444a681 ("drm/bridge:
Fix assignment of the of_node of the parent to aux bridge").
The assignment of the of_node to the aux HPD bridge needs to mark the
of_node as reused, otherwise driver core will attempt to bind resources
like pinctrl, which is going to fail as corresponding pins are already
marked as used by the parent device.
Fix that by using the device_set_of_node_from_dev() helper instead of
assigning it directly.
Fixes: e560518a6c ("drm/bridge: implement generic DP HPD bridge")
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250608-fix-aud-hpd-bridge-v1-1-4641a6f8e381@oss.qualcomm.com
Pull RTC fixes from Alexandre Belloni:
"Some fixes for 6.16. The cmos one is important for PREEMPT_RT. I've
also added the s5m changes as they had a dependency on the MFD pull
request that was included in 6.16-rc1 and we didn't synchronize before
the merge window and they won't hurt.
- cmos: use spin_lock_irqsave in cmos_interrupt
- pcf2127: fix SPI command byte for PCF2131
- s5m: add S2MPG10 support"
* tag 'rtc-6.16-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux:
rtc: pcf2127: add missing semicolon after statement
rtc: pcf2127: fix SPI command byte for PCF2131
rtc: cmos: use spin_lock_irqsave in cmos_interrupt
rtc: s5m: replace open-coded read/modify/write registers with regmap helpers
rtc: s5m: replace regmap_update_bits with regmap_clear/set_bits
rtc: s5m: switch to devm_device_init_wakeup
rtc: s5m: fix a typo: peding -> pending
rtc: s5m: add support for S2MPG10 RTC
rtc: s5m: prepare for external regmap
rtc: s5m: cache device type during probe
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any mp886x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for mp8867 and mp8869.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095918.912-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Currently, the driver_data of the i2c ID table is wrong, so it won't
work if any sy8824x user makes use of the ID table. Fortunately, there's
no such user in upstream source code, we can fix the issue by using
different ID table entry for sy8824c, sy8824e, sy20276 and sy20278.
Signed-off-by: Jisheng Zhang <jszhang@kernel.org>
Link: https://patch.msgid.link/20250629095905.898-1-jszhang@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Delayed work that prevents USB3 hubs from runtime-suspending too early
needed to be flushed in hub_quiesce() to resolve issues detected on
QC SC8280XP CRD board during suspend resume testing.
This flushing did however trigger new issues on Raspberry Pi 3B+, which
doesn't have USB3 ports, and doesn't queue any post resume delayed work.
The flushed 'hub->init_work' item is used for several purposes, and
is originally initialized with a 'NULL' work function. The work function
is also changed on the fly, which may contribute to the issue.
Solve this by creating a dedicated delayed work item for post resume work,
and flush that delayed work in hub_quiesce()
Cc: stable <stable@kernel.org>
Fixes: a49e1e2e78 ("usb: hub: Fix flushing and scheduling of delayed work that tunes runtime pm")
Reported-by: Mark Brown <broonie@kernel.org>
Closes: https://lore.kernel.org/linux-usb/aF5rNp1l0LWITnEB@finisterre.sirena.org.uk
Signed-off-by: Mathias Nyman <mathias.nyman@linux.intel.com>
Tested-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com> # SC8280XP CRD
Tested-by: Mark Brown <broonie@kernel.org>
Link: https://lore.kernel.org/r/20250627164348.3982628-2-mathias.nyman@linux.intel.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
There is a potential NULL pointer dereference in zd_mac_tx_to_dev(). For
example, the following is possible:
T0 T1
zd_mac_tx_to_dev()
/* len == skb_queue_len(q) */
while (len > ZD_MAC_MAX_ACK_WAITERS) {
filter_ack()
spin_lock_irqsave(&q->lock, flags);
/* position == skb_queue_len(q) */
for (i=1; i<position; i++)
skb = __skb_dequeue(q)
if (mac->type == NL80211_IFTYPE_AP)
skb = __skb_dequeue(q);
spin_unlock_irqrestore(&q->lock, flags);
skb_dequeue() -> NULL
Since there is a small gap between checking skb queue length and skb being
unconditionally dequeued in zd_mac_tx_to_dev(), skb_dequeue() can return NULL.
Then the pointer is passed to zd_mac_tx_status() where it is dereferenced.
In order to avoid potential NULL pointer dereference due to situations like
above, check if skb is not NULL before passing it to zd_mac_tx_status().
Found by Linux Verification Center (linuxtesting.org) with SVACE.
Fixes: 459c51ad6e ("zd1211rw: port to mac80211")
Signed-off-by: Daniil Dulov <d.dulov@aladdin.ru>
Link: https://patch.msgid.link/20250626114619.172631-1-d.dulov@aladdin.ru
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
Add FALLOC_FL_ALLOCATE_RANGE to the set of supported fallocate flags in
XFS_FALLOC_FL_SUPPORTED. This change improves code clarity and maintains
by explicitly showing this flag in the supported flags mask.
Note that since FALLOC_FL_ALLOCATE_RANGE is defined as 0x00, this addition
has no functional modifications.
Reviewed-by: Carlos Maiolino <cmaiolino@redhat.com>
Signed-off-by: Youling Tang <tangyouling@kylinos.cn>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Carlos Maiolino <cem@kernel.org>
Merge series from Gabor Juhos <j4g8y7@gmail.com>:
The 'spi-qpic-nand' driver may cause memory corruption under some
circumstances. The first patch in the series changes the driver to
avoid that, whereas the second adds some sanity checks to the common
QPIC code in order to make detecting such errors easier in the future.
Fixes a logic issue in mlxreg_lc_completion_notify() where the
intention was to check if MLXREG_LC_POWERED flag is not set before
powering on the device.
The original code used "state & ~MLXREG_LC_POWERED" to check for the
absence of the POWERED bit. However this condition evaluates to true
even when other bits are set, leading to potentially incorrect
behavior.
Corrected the logic to explicitly check for the absence of
MLXREG_LC_POWERED using !(state & MLXREG_LC_POWERED).
Fixes: 62f9529b8d ("platform/mellanox: mlxreg-lc: Add initial support for Nvidia line card devices")
Suggested-by: Vadim Pasternak <vadimp@nvidia.com>
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Link: https://lore.kernel.org/r/20250630105812.601014-1-alok.a.tiwari@oracle.com
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
A new header fch.h was created to store registers used by different AMD
drivers. This header was included by i2c-piix4 in
commit 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH
definitions to <asm/amd/fch.h>"). To prevent compile failures on non-x86
archs i2c-piix4 was set to only compile on x86 by commit 7e173eb82a
("i2c: piix4: Make CONFIG_I2C_PIIX4 dependent on CONFIG_X86").
This was not a good decision because loongarch and mips both actually
support i2c-piix4 and set it enabled in the defconfig.
Move the header to a location accessible by all architectures.
Fixes: 624b0d5696 ("i2c: piix4, x86/platform: Move the SB800 PIIX4 FCH definitions to <asm/amd/fch.h>")
Suggested-by: Hans de Goede <hansg@kernel.org>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Hans de Goede <hansg@kernel.org>
Link: https://lore.kernel.org/r/20250610205817.3912944-1-superm1@kernel.org
Reviewed-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@linux.intel.com>
