Joseph Huang says:
====================
Add support for mdb offload failure notification
Currently the bridge does not provide real-time feedback to user space
on whether or not an attempt to offload an mdb entry was successful.
This patch set adds support to notify user space about failed offload
attempts, and is controlled by a new knob mdb_offload_fail_notification.
A break-down of the patches in the series:
Patch 1 adds offload failed flag to indicate that the offload attempt
has failed. The flag is reflected in netlink mdb entry flags.
Patch 2 adds the new bridge bool option mdb_offload_fail_notification.
Patch 3 notifies user space when the result is known, controlled by
mdb_offload_fail_notification setting.
====================
Link: https://patch.msgid.link/20250411150323.1117797-1-Joseph.Huang@garmin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Peter Seiderer says:
====================
net: pktgen: fix checkpatch code style errors/warnings
Fix checkpatch detected code style errors/warnings detected in
the file net/core/pktgen.c (remaining checkpatch checks will be addressed
in a follow up patch set).
====================
Link: https://patch.msgid.link/20250410071749.30505-1-ps.report@gmx.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix checkpatch code style warnings:
WARNING: Missing a blank line after declarations
#761: FILE: net/core/pktgen.c:761:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#780: FILE: net/core/pktgen.c:780:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#806: FILE: net/core/pktgen.c:806:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#823: FILE: net/core/pktgen.c:823:
+ char c;
+ if (get_user(c, &user_buffer[i]))
WARNING: Missing a blank line after declarations
#1968: FILE: net/core/pktgen.c:1968:
+ char f[32];
+ memset(f, 0, 32);
WARNING: Missing a blank line after declarations
#2410: FILE: net/core/pktgen.c:2410:
+ struct pktgen_net *pn = net_generic(dev_net(pkt_dev->odev), pg_net_id);
+ if (!x) {
WARNING: Missing a blank line after declarations
#2442: FILE: net/core/pktgen.c:2442:
+ __u16 t;
+ if (pkt_dev->flags & F_QUEUE_MAP_RND) {
WARNING: Missing a blank line after declarations
#2523: FILE: net/core/pktgen.c:2523:
+ unsigned int i;
+ for (i = 0; i < pkt_dev->nr_labels; i++)
WARNING: Missing a blank line after declarations
#2567: FILE: net/core/pktgen.c:2567:
+ __u32 t;
+ if (pkt_dev->flags & F_IPSRC_RND)
WARNING: Missing a blank line after declarations
#2587: FILE: net/core/pktgen.c:2587:
+ __be32 s;
+ if (pkt_dev->flags & F_IPDST_RND) {
WARNING: Missing a blank line after declarations
#2634: FILE: net/core/pktgen.c:2634:
+ __u32 t;
+ if (pkt_dev->flags & F_TXSIZE_RND) {
WARNING: Missing a blank line after declarations
#2736: FILE: net/core/pktgen.c:2736:
+ int i;
+ for (i = 0; i < pkt_dev->cflows; i++) {
WARNING: Missing a blank line after declarations
#2738: FILE: net/core/pktgen.c:2738:
+ struct xfrm_state *x = pkt_dev->flows[i].x;
+ if (x) {
WARNING: Missing a blank line after declarations
#2752: FILE: net/core/pktgen.c:2752:
+ int nhead = 0;
+ if (x) {
WARNING: Missing a blank line after declarations
#2795: FILE: net/core/pktgen.c:2795:
+ unsigned int i;
+ for (i = 0; i < pkt_dev->nr_labels; i++)
WARNING: Missing a blank line after declarations
#3480: FILE: net/core/pktgen.c:3480:
+ ktime_t idle_start = ktime_get();
+ schedule();
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Fix checkpatch code style warnings:
WARNING: Block comments use a trailing */ on a separate line
+ * removal by worker thread */
WARNING: Block comments use * on subsequent lines
+ __u8 tos; /* six MSB of (former) IPv4 TOS
+ are for dscp codepoint */
WARNING: Block comments use a trailing */ on a separate line
+ are for dscp codepoint */
WARNING: Block comments use * on subsequent lines
+ __u8 traffic_class; /* ditto for the (former) Traffic Class in IPv6
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use a trailing */ on a separate line
+ (see RFC 3260, sec. 4) */
WARNING: Block comments use * on subsequent lines
+ /* = {
+ 0x00, 0x80, 0xC8, 0x79, 0xB3, 0xCB,
WARNING: Block comments use * on subsequent lines
+ /* Field for thread to receive "posted" events terminate,
+ stop ifs etc. */
WARNING: Block comments use a trailing */ on a separate line
+ stop ifs etc. */
WARNING: Block comments should align the * on each line
+ * we go look for it ...
+*/
WARNING: Block comments use a trailing */ on a separate line
+ * we resolve the dst issue */
WARNING: Block comments use a trailing */ on a separate line
+ * with proc_create_data() */
Signed-off-by: Peter Seiderer <ps.report@gmx.net>
Reviewed-by: Toke Høiland-Jørgensen <toke@redhat.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
netdevice reg_state was split into two 16 bit enums back in 2010
in commit a2835763e1 ("rtnetlink: handle rtnl_link netlink
notifications manually"). Since the split the fields have been
moved apart, and last year we converted reg_state to a normal
u8 in commit 4d42b37def ("net: convert dev->reg_state to u8").
rtnl_link_state being a 16 bitfield makes no sense. Convert it
to a single bool, it seems very unlikely after 15 years that
we'll need more values in it.
We could drop dev->rtnl_link_ops from the conditions but feels
like having it there more clearly points at the reason for this
hack.
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250410014246.780885-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In order to work properly PRP requires slave1 and slave2 to share the
same MAC address. To ease the configuration process on userspace tools,
sync the slave2 MAC address with slave1. In addition, when deleting the
port from the list, restore the original MAC address.
Signed-off-by: Fernando Fernandez Mancera <ffmancera@riseup.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Airoha AN7581 SoC ship with a Switch based on the MT753x Switch embedded
in other SoC like the MT7581 and the MT7988. Similar to these they
require configuring some pin to enable LED PHYs.
Add support for the PHY ID for the Airoha embedded Switch and define a
simple probe function to toggle these pins. Also fill the LED functions
and add dedicated function to define LED polarity.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250410100410.348-2-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When commit 462a3daad6 ("net: phy: mediatek: fix compile-test
dependencies") fixed the dependency, it should have also introduced
an or on COMPILE_TEST to permit this driver to be compile-tested even if
NVMEM_MTK_EFUSE wasn't selected. The driver makes use of NVMEM API that
are always compiled (return error) so the driver can actually be
compiled even without that config.
Fix and simplify the dependency condition of this kernel config.
Fixes: 462a3daad6 ("net: phy: mediatek: fix compile-test dependencies")
Acked-by: Daniel Golle <daniel@makrotopia.org>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Link: https://patch.msgid.link/20250410100410.348-1-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kuniyuki Iwashima says:
====================
net: Retire DCCP socket.
As announced by commit b144fcaf46 ("dccp: Print deprecation
notice."), it's time to remove DCCP socket.
The patch 2 removes net/dccp, LSM code, doc, and etc, leaving
DCCP netfilter modules.
The patch 3 unexports shared functions for DCCP, and the patch 4
renames tcp_or_dccp_get_hashinfo() to tcp_get_hashinfo().
We can do more cleanup; for example, remove IPPROTO_TCP checks in
__inet6?_check_established(), remove __module_get() for twsk,
remove timewait_sock_ops.twsk_destructor(), etc, but it will be
more of TCP stuff, so I'll defer to a later series.
v2: https://lore.kernel.org/20250409003014.19697-1-kuniyu@amazon.com
v1: https://lore.kernel.org/20250407231823.95927-1-kuniyu@amazon.com
====================
Link: https://patch.msgid.link/20250410023921.11307-1-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
DCCP was orphaned in 2021 by commit 054c4610bd ("MAINTAINERS: dccp:
move Gerrit Renker to CREDITS"), which noted that the last maintainer
had been inactive for five years.
In recent years, it has become a playground for syzbot, and most changes
to DCCP have been odd bug fixes triggered by syzbot. Apart from that,
the only changes have been driven by treewide or networking API updates
or adjustments related to TCP.
Thus, in 2023, we announced we would remove DCCP in 2025 via commit
b144fcaf46 ("dccp: Print deprecation notice.").
Since then, only one individual has contacted the netdev mailing list. [0]
There is ongoing research for Multipath DCCP. The repository is hosted
on GitHub [1], and development is not taking place through the upstream
community. While the repository is published under the GPLv2 license,
the scheduling part remains proprietary, with a LICENSE file [2] stating:
"This is not Open Source software."
The researcher mentioned a plan to address the licensing issue, upstream
the patches, and step up as a maintainer, but there has been no further
communication since then.
Maintaining DCCP for a decade without any real users has become a burden.
Therefore, it's time to remove it.
Removing DCCP will also provide significant benefits to TCP. It allows
us to freely reorganize the layout of struct inet_connection_sock, which
is currently shared with DCCP, and optimize it to reduce the number of
cachelines accessed in the TCP fast path.
Note that we keep DCCP netfilter modules as requested. [3]
Link: https://lore.kernel.org/netdev/20230710182253.81446-1-kuniyu@amazon.com/T/#u #[0]
Link: https://github.com/telekom/mp-dccp #[1]
Link: https://github.com/telekom/mp-dccp/blob/mpdccp_v03_k5.10/net/dccp/non_gpl_scheduler/LICENSE #[2]
Link: https://lore.kernel.org/netdev/Z_VQ0KlCRkqYWXa-@calendula/ #[3]
Signed-off-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Acked-by: Paul Moore <paul@paul-moore.com> (LSM and SELinux)
Acked-by: Casey Schaufler <casey@schaufler-ca.com>
Link: https://patch.msgid.link/20250410023921.11307-3-kuniyu@amazon.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
EN8811H outputs 25MHz or 50MHz clocks on CKO, selected by GPIO3.
CKO clock operates continuously from power-up through md32 loading.
Implement clk provider driver so we can disable the clock output in case
it isn't needed, which also helps to reduce EMF noise
Signed-off-by: Lucien.Jheng <lucienx123@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/20250409150902.3596-1-lucienx123@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some stm32 implementations need the receive clock running in suspend,
as indicated by dwmac->ops->clk_rx_enable_in_suspend. The existing
code achieved this in a rather complex way, by passing a flag around.
However, the clk API prepare/enables are counted - which means that a
clock won't be stopped as long as there are more prepare and enables
than disables and unprepares, just like a reference count.
Therefore, we can simplify this logic by calling clk_prepare_enable()
an additional time in the probe function if this flag is set, and then
balancing that at remove time.
With this, we can avoid passing a "are we suspending" and "are we
resuming" flag to various functions in the driver.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
In the ip_route_output_key_cash_rcu function, the input fl4 member saddr is
first checked to be non-zero before entering multicast, broadcast and
arbitrary IP address checks. However, the fact that the IP address is not
0 has already ruled out the possibility of any address, so remove
unnecessary judgment.
Signed-off-by: Zhengchao Shao <shaozhengchao@163.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250409033321.108244-1-shaozhengchao@163.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
tools: ynl: c: basic netlink-raw support
Basic support for netlink-raw AKA classic netlink in user space C codegen.
This series is enough to read routes and addresses from the kernel
(see the samples in patches 12 and 13).
Specs need to be slightly adjusted and decorated with the c naming info.
In terms of codegen this series includes just the basic plumbing required
to skip genlmsghdr and handle request types which may technically also
be legal in genetlink-legacy but are very uncommon there.
Subsequent series will add support for:
- handling CRUD-style notifications
- code gen for array types classic netlink uses
- sub-message support
v1: https://lore.kernel.org/20250409000400.492371-1-kuba@kernel.org
====================
Link: https://patch.msgid.link/20250410014658.782120-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
YNL C can now generate code for simple classic netlink families.
Include rt-route in the Makefile for generation and add a sample.
$ ./tools/net/ynl/samples/rt-route
oif: wlp0s20f3 gateway: 192.168.1.1
oif: wlp0s20f3 dst: 192.168.1.0/24
oif: vpn0 dst: fe80::/64
oif: wlp0s20f3 dst: fe80::/64
oif: wlp0s20f3 gateway: fe80::200:5eff:fe00:201
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-14-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If the type for the response to do and dump are the same we don't
generate it twice. This is called "type_consistent" in the generator.
Consider operations which only have dump to also be consistent.
This removes unnecessary "_dump" from the names. There's a number
of GET ops in classic Netlink which only have dump handlers.
Make sure we output the "onesided" types, normally if the type
is consistent we only output it when we render the do structures.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250410014658.782120-11-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
C codegen skips generating the structs if request/reply has no attrs.
In such cases the request op takes no argument and return int
(rather than response struct). In case of classic netlink a lot of
information gets passed using the fixed struct, however, so adjust
the logic to consider a request empty only if it has no attrs _and_
no fixed struct.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250410014658.782120-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Classic netlink has static family IDs specified in YAML,
there is no family name -> ID lookup. Support providing
the ID info to the library via the generated struct and
make library use it. Since NETLINK_ROUTE is ID 0 we need
an extra boolean to indicate classic_id is to be used.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of the attribute list is to list the attributes
which will be included in a given message to shrink the objects
for families with huge attr spaces. Fixed headers are always
present in their entirety (between netlink header and the attrs)
so there's no point in listing their members. Current C codegen
doesn't expect them and tries to look them up in the attribute space.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The purpose of the attribute list is to list the attributes
which will be included in a given message to shrink the objects
for families with huge attr spaces. Fixed headers are always
present in their entirety (between netlink header and the attrs)
so there's no point in listing their members. Current C codegen
doesn't expect them and tries to look them up in the attribute space.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The rtnetlink family names are set to rt-$name within the YAML
but the files are called rt_$name. C codegen assumes that the
generated file name will match the family. The use of dashes
is in line with our general expectation that name properties
in the spec use dashes not underscores (even tho, as Donald
points out most genl families use underscores in the name).
We have 3 un-ideal options to choose from:
- accept the slight inconsistency with old families using _, or
- accept the slight annoyance with all languages having to do s/-/_/
when looking up family ID, or
- accept the inconsistency with all name properties in new YAML spec
being separated with - and just the family name always using _.
Pick option 1 and rename the rtnl spec files.
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Link: https://patch.msgid.link/20250410014658.782120-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ASIX AX88772B based USB 10/100 Ethernet adapter doesn't come
up ("carrier off"), despite the built-in 100BASE-FX PHY positive link
indication. The internal PHY is configured (using EEPROM) in fixed
100 Mbps full duplex mode.
The primary problem appears to be using carrier_netif_{on,off}() while,
at the same time, delegating carrier management to phylink. Use only the
latter and remove "manual control" in the asix driver.
I don't have any other AX88772 board here, but the problem doesn't seem
specific to a particular board or settings - it's probably
timing-dependent.
Remove unused asix_adjust_link() as well.
Signed-off-by: Krzysztof Hałasa <khalasa@piap.pl>
Tested-by: Oleksij Rempel <o.rempel@pengutronix.de>
Link: https://patch.msgid.link/m3plhmdfte.fsf_-_@t19.piap.pl
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
