Pull Qualcomm clk driver fixes from Bjorn Andersson:
The parking of shared RCGs during registration parks the MDP source
clock, disabling display until the msm display driver successfully
initializes the hardware again. Mark this clock on Makena and Hamoa as
"no_init_park" to retain a working recovery console etc.
* tag 'qcom-clk-fixes-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: dispcc-sc8280xp: Don't park mdp_clk_src at registration time
clk: qcom: x1e80100-dispcc: Stop disp_cc_mdss_mdp_clk_src from getting parked
Pull a Samsung clk driver fix from Krzysztof Kozlowski:
Google GS101: Correct the register name for saving and restoring state
during system suspend and resume. Lack of proper save/restore leads to
incorrect clock values after system resume.
* tag 'samsung-clk-fixes-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
clk: samsung: gs101: Fix missing USI7_USI DIV clock in peric0_clk_regs
In the peric0_clk_regs array, the divider register offset for USI6 was
accidentally listed twice, while the divider for USI7 was omitted.
Missing this DIV register causes the USI7 clock divider setting to be
lost and reset to its hardware default value during a suspend/resume
cycle.
Replace the duplicated USI6 DIV entry with the correct USI7 DIV
register.
Fixes: 893f133a04 ("clk: samsung: gs101: add support for cmu_peric0")
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Reviewed-by: Peter Griffin <peter.griffin@linaro.org>
Reviewed-by: Tudor Ambarus <tudor.ambarus@linaro.org>
Link: https://patch.msgid.link/20260505171457.1960837-1-visitorckw@gmail.com
Signed-off-by: Krzysztof Kozlowski <krzk@kernel.org>
Parking disp_cc_mdss_mdp_clk_src at 19.2MHz causing the EFI GOP framebuffer
to stop functioning. The EFI GOP framebuffer should keep working until
the msm display driver loads, to help with boot debugging and to ensure
display output when the msm module is not in the initramfs.
Switch disp_cc_mdss_mdp_clk_src over to clk_rcg2_shared_no_init_park_ops
to keep the EFI GOP working after binding the x1e80100-dispcc driver.
Suggested-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Signed-off-by: Hans de Goede <johannes.goede@oss.qualcomm.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Fixes: 01a0a6cc8c ("clk: qcom: Park shared RCGs upon registration")
Link: https://lore.kernel.org/r/20260425123351.6292-1-johannes.goede@oss.qualcomm.com
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
The driver reuses the OF node of the parent multi-function device but
fails to take another reference to balance the one dropped by the
platform bus code when unbinding the MFD and deregistering the child
devices.
Fix this by using the intended helper for reusing OF nodes.
Fixes: 2dc51ca822 ("clk: RK808: Reduce 'struct rk808' usage")
Cc: stable@vger.kernel.org # 6.5
Cc: Sebastian Reichel <sebastian.reichel@collabora.com>
Signed-off-by: Johan Hovold <johan@kernel.org>
Reviewed-by: Sebastian Reichel <sebastian.reichel@collabora.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Grow our clk-eyeq family; it knows how to spawn reset provider and pin
controller children. Expand with a generic PHY driver on EyeQ5.
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The auxiliary device creation of this driver is simple enough to
use the available auxiliary device creation helper.
Use it and remove some boilerplate code.
Tested-by: Théo Lebrun <theo.lebrun@bootlin.com> # On Mobileye EyeQ5
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Signed-off-by: Théo Lebrun <theo.lebrun@bootlin.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
top_dclk is the DDR bus clock. If it is gated by clk_disable_unused,
all memory-mapped bus transactions cease to function, causing DMA
engines to hang and general system instability.
Mark it CLK_IS_CRITICAL so the CCF never gates it during the
unused clock sweep.
Fixes: e371a77255 ("clk: spacemit: k3: add the clock tree")
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Troy Mitchell <troy.mitchell@linux.spacemit.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull clk fix from Stephen Boyd:
"One more fix for the merge window to avoid a boot hang on
Raspberry Pi 3B by marking the VEC clk critical so that it
doesn't get turned off and hang the bus"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux:
clk: bcm: rpi: Mark VEC clock as CLK_IGNORE_UNUSED
Pull clk updates from Stephen Boyd:
"We've finally gotten rid of the struct clk_ops::round_rate() code
after months of effort from Brian Masney. Now the only option is to
use determine_rate(), which is good because that takes a struct
argument instead of just a couple unsigned longs, allowing us to
easily modify the way we determine and set rates in the clk tree.
Beyond that core framework change we've got the typical pile of new
SoC clk driver additions, fixes for clk data and/or adding missing
clks because the consumer driver using those clks wasn't ready, etc.
The usual suspects are all here: Qualcomm, Samsung, Mediatek, and
Rockchip along with some newcomers making RISC-V SoCs like ESWIN's
eic700 and Tenstorrent's Atlantis. The clk driver side of this looks
pretty normal.
Core:
- Remove the round_rate() clk op (yay!)
New Drivers:
- ESWIN eic700 SoC clk support
- Econet EN751221 SoC clock/reset support
- Global TCSR, RPMh, and display clock controller support for the
Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller support
for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Axis ARTPEC-9: Add new PLL clocks and new drivers for eight clock
controllers on the SoC
- ExynosAutov920: Add G3D (GPU) clock controller
- Clock driver for the Rockchip RV1103B SoC
- Initial support for the Renesas RZ/G3L (R9A08G046) SoC
- Clock and reset controllers (e.g. PRCM) in the Tenstorrent Atlantis SoC"
* tag 'clk-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/clk/linux: (132 commits)
clk: visconti: pll: initialize clk_init_data to zero
clk: fsl-sai: Add MCLK generation support
clk: fsl-sai: Extract clock setup into fsl_sai_clk_register()
dt-bindings: clock: fsl-sai: Document clock-cells = <1> support
clk: fsl-sai: Add i.MX8M support with 8 byte register offset
clk: fsl-sai: Sort the headers
dt-bindings: clock: fsl-sai: Document i.MX8M support
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
...
Pull SoC driver updates from Arnd Bergmann:
"The driver updates again are all over the place with many minor fixes
going into platform specific code. The most notable changes are:
- Support for Microchip pic64gx system controllers
- Work on cleaning up devicetree bindings for SoC drivers, and
converting them into the new format
- Lots of smaller changes for Qualcomm SoC drivers, including support
for a number of newly supported chips
- reset controller API cleanups and a new driver for Cix Sky1
- Reworks of the Tegra PMC and CBB drivers, along with a change to
how individual Tegra SoCs get selected in Kconfig and BPMP firmware
driver updates including a refresh of the ABI header to match the
version used by firmware
- STM32 updates to the firewall bus driver and support for the debug
bus through OP-TEE
- SCMI firmware driver improvements for reliability, in particular
for dealing with broken firmware interrupts
- Memory driver updates for Tegra, and a patch to remove the unused
Baikal T1 driver"
* tag 'soc-drivers-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (193 commits)
firmware: arm_ffa: Use the correct buffer size during RXTX_MAP
firmware: qcom: scm: Allow QSEECOM on Lenovo IdeaCentre Mini X
clk: spear: fix resource leak in clk_register_vco_pll()
reset: rzv2h-usb2phy: Add support for VBUS mux controller registration
reset: rzv2h-usb2phy: Convert to regmap API
dt-bindings: reset: renesas,rzv2h-usb2phy: Document RZ/G3E USB2PHY reset
dt-bindings: reset: renesas,rzv2h-usb2phy: Add '#mux-state-cells' property
soc: microchip: add mpfs gpio interrupt mux driver
dt-bindings: soc: microchip: document PolarFire SoC's gpio interrupt mux
gpio: mpfs: Add interrupt support
soc: qcom: ubwc: add helpers to get programmable values
soc: qcom: ubwc: add helper to get min_acc length
firmware: qcom: scm: Register gunyah watchdog device
soc: qcom: socinfo: Add SoC ID for SA8650P
dt-bindings: arm: qcom,ids: Add SoC ID for SA8650P
firmware: qcom: scm: Allow QSEECOM on Mahua CRD
soc: qcom: wcnss: simplify allocation of req
soc: qcom: pd-mapper: Add support for Eliza
soc: qcom: aoss: compare against normalized cooling state
soc: qcom: llcc: fix v1 SB syndrome register offset
...
Declare the PLLs and fixed factors found in the EyeQ6Lplus OLB as part
of the match data for the "mobileye,eyeq6lplus-olb" compatible.
The PLL and fixed factor of the CPU are registered in early init as they
are required during the boot by the GIC timer.
Also select clk-eyeq for all EYEQ SoCs instead of listing each one
individually, as it is needed by all Mobileye EyeQ SoC.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The spread spectrum of the PLL found in eyeQ OLB is in 1/1024 parts of the
frequency, not in 1/1000, so adjust the computation of the accuracy. Also
correct the downspreading to match.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The output of the PLL is routed before the post-divisor so it should be
ignored when computing the frequency of the PLL, functional change is
implemented to reflect how the clock signal is wired internally.
For the PLL of the EyeQ5, EyeQ6L, and EyeQ6H, this change has no impact
as the post-divisor is either reported as disabled or set to 1. The PLL
frequency is the same before and after the post-divisor.
For the PLL in EyeQ6Lplus, however, the post-divisor is not 1, so it must
be ignored to compute the correct frequency.
Signed-off-by: Benoît Monin <benoit.monin@bootlin.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Sashiko reported the following:
> The struct clk_init_data init is declared on the stack without being
> fully zero-initialized. While fields like name, flags, parent_names,
> num_parents, and ops are explicitly assigned, the parent_data and
> parent_hws fields are left containing stack garbage.
clk_core_populate_parent_map() currently prefers the parent names over
the parent data and hws, so this isn't a problem at the moment. If that
ordering ever changed in the future, then this could lead to some
unexpected crashes. Let's just go ahead and make sure that the struct
clk_init_data is initialized to zero as a good practice.
Fixes: b4cbe606dc ("clk: visconti: Add support common clock driver and reset driver")
Link: https://sashiko.dev/#/patchset/20260326042317.122536-1-rosenp%40gmail.com
Signed-off-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Benoît Monin <benoit.monin@bootlin.com>
Reviewed-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.x90@mail.toshiba>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The driver currently supports generating BCLK. There are systems which
require generation of MCLK instead. Register new MCLK clock and handle
clock-cells = <1> to differentiate between BCLK and MCLK. In case of a
legacy system with clock-cells = <0>, the driver behaves as before, i.e.
always returns BCLK.
Note that it is not possible re-use the current SAI audio driver to
generate MCLK and correctly enable and disable the MCLK.
If SAI (audio driver) is used to control the MCLK enablement, then MCLK
clock is not always enabled, and it is not necessarily enabled when the
codec may need the clock to be enabled. There is also no way for the
codec node to specify phandle to clock provider in DT, because the SAI
(audio driver) is not clock provider.
If SAI (clock driver) is used to control the MCLK enablement, then MCLK
clock is enabled when the codec needs the clock enabled, because the
codec is the clock consumer and the SAI (clock driver) is the clock
provider, and the codec driver can request the clock to be enabled when
needed. There is also the usual phandle to clock provider in DT, because
the SAI (clock driver) is clock provider.
Acked-by: Michael Walle <mwalle@kernel.org>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Create helper function fsl_sai_clk_register() to set up and register
SAI clock. Rename BCLK specific struct fsl_sai_clk members with bclk_
prefix. Use of_node_full_name(dev->of_node) and clock name to register
uniquely named clock. This is done in preparation for the follow up
patch, which adds MCLK support.
Signed-off-by: Marek Vasut <marex@nabladev.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The i.MX8M/Mini/Nano/Plus variant of the SAI IP has control registers
shifted by +8 bytes and requires additional bus clock. Add support for
the i.MX8M variant of the IP with this register shift and additional
clock.
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Marek Vasut <marex@nabladev.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull round_rate refactoring from Brian Masney:
Now that all of the dependencies across the tree have been merged into
Linus's tree, here's a small series with the following changes:
- Converts clk-composite from round_rate() to determine_rate()
- Removes the round_rate() clk op
- Removes the deprecated functions divider_round_rate(),
divider_round_rate_parent(), and divider_ro_round_rate_parent() since
these are just wrappers for the corresponding determine_rate variant
* tag 'clk-remove-deprecated-apis-v7.1' of ssh://github.com/masneyb/linux:
clk: divider: remove divider_round_rate() and divider_round_rate_parent()
clk: divider: remove divider_ro_round_rate_parent()
clk: remove round_rate() clk ops
clk: composite: convert from round_rate() to determine_rate()
clk: test: remove references to clk_ops.round_rate
Pull Qualcomm clock driver updates from Bjorn Andersson:
- Global TCSR, RPMh, and display clock controller support for
the Qualcomm Eliza platform
- TCSR, the multiple global, and the RPMh clock controller
support for the Qualcomm Nord platform
- GPU clock controller support for Qualcomm SM8750
- Video and GPU clock controller support for Qualcomm Glymur
- Global clock controller support for Qualcomm IPQ5210
- Introduce various smaller display-related fixes across
Qualcomm Kaanapali, Milos, SC8280XP, SM4450, SM8250, and
SA8775P.
- Add missing GDSCs and fix retention flags for PCIe and USB
power domains on SC8180X.
- Enable runtime PM support to ensure performance votes are
propagated to CX on Qualcomm platforms.
- Mark the USB QTB clock as always-on on Qualcomm Hamoa, in
order to ensure the SMMU can work even when USB controller
device is sleeping.
- Qualcomm IPQ6018 and IPQ8074 support in the IPQ CMN PLL
driver
- MDSS resets for Qualcomm SC7180, SM6115, and SM6125, to allow
display subsystem driver to reset the hardware from the state
left by the bootloader.
* tag 'qcom-clk-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux: (67 commits)
clk: qcom: gcc: Add multiple global clock controller driver for Nord SoC
clk: qcom: rpmh: Add support for Nord rpmh clocks
clk: qcom: Add TCSR clock driver for Nord SoC
dt-bindings: clock: qcom: Add Nord Global Clock Controller
dt-bindings: clock: qcom-rpmhcc: Add support for Nord SoCs
dt-bindings: clock: qcom: Document the Nord SoC TCSR Clock Controller
clk: qcom: gcc-x1e80100: Keep GCC USB QTB clock always ON
clk: qcom: Constify list of critical CBCR registers
clk: qcom: Constify qcom_cc_driver_data
clk: qcom: videocc-glymur: Constify qcom_cc_desc
clk: qcom: Add a driver for SM8750 GPU clocks
dt-bindings: clock: qcom: Add SM8750 GPU clocks
clk: qcom: ipq-cmn-pll: Add IPQ8074 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ8074
clk: qcom: ipq-cmn-pll: Add IPQ6018 SoC support
dt-bindings: clock: qcom: Add CMN PLL support for IPQ6018
clk: qcom: gdsc: Fix error path on registration of multiple pm subdomains
dt-bindings: clock: qcom: Add missing power-domains property
clk: qcom: gcc-eliza: Enable FORCE_MEM_CORE_ON for UFS AXI PHY clock
clk: qcom: dispcc-sc7180: Add missing MDSS resets
...
Pull Allwinner clk driver updates from Chen-Yu Tsai:
Just one change for this cycle, implementing support for the r-spi
module clock in the A523 PRCM block, which was somehow missing during
the initial bring-up.
* tag 'sunxi-clk-for-7.1' of https://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
clk: sunxi-ng: sun55i-a523-r: Add missing r-spi module clock
Pull a Qualcomm clk driver fix from Bjorn Andersson
- Fix the clock ops for SM8450 DPTX1 aux clock src to ensure
DisplayPort works
* tag 'qcom-clk-fixes-for-7.0' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
clk: qcom: dispcc-sm8450: use RCG2 ops for DPTX1 AUX clock source
Pull a microchip clk driver fix from Claudiu Beznea:
- Fix out of bounds access for MPFS CCC clock controller
* tag 'clk-microchip-fixes-7.0' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
clk: microchip: mpfs-ccc: fix out of bounds access during output registration
Pull i.MX clock driver updates from Abel Vesa:
- Add optional ENET reference pad clock inputs for i.MX6Q/UL
- Fix debug output in PLL14xx driver to use unsigned format specifier
- Add 333.333 MHz and 477.4 MHz support to fracn-gppll for display use cases
- Fix device node reference leaks in i.MX6 driver
- Fix device node reference leak in of_assigned_ldb_sels()
- Fix ACM clock flags on i.MX8 to prevent SAI sysclk failures
- Move VF610_CLK_END define into the driver
- Add VF610 Ethernet switch clock support
- Correct CSI PHY parent clock selection on i.MX8MQ
* tag 'clk-imx-7.1' of git://git.kernel.org/pub/scm/linux/kernel/git/abelvesa/linux:
clk: imx8mq: Correct the CSI PHY sels
clk: vf610: Add support for the Ethernet switch clocks
dt-bindings: clock: vf610: Add definitions for MTIP L2 switch
dt-bindings: clock: vf610: Drop VF610_CLK_END define
clk: vf610: Move VF610_CLK_END define to clk-vf610 driver
clk: imx: imx8-acm: fix flags for acm clocks
clk: imx: imx6q: Fix device node reference leak in of_assigned_ldb_sels()
clk: imx: imx6q: Fix device node reference leak in pll6_bypassed()
clk: imx: fracn-gppll: Add 477.4MHz support
clk: imx: fracn-gppll: Add 333.333333 MHz support
clk: imx: pll14xx: Use unsigned format specifier
dt-bindings: clock: imx6q[ul]-clock: add optional clock enet[1]_ref_pad
Pull Rockchip clk driver updates from Heiko Stuebner:
- Clock driver for the Rockchip RV1103B SoC
For whatever reason that SoC only got a B addition to the name,
but major changes internally - likely it is pin compatible with
the non-b-variant. Other change is actually exporting PCIe
pipe-clocks that were already in the binding.
* tag 'v7.1-rockchip-clk1' of https://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3568: Add PCIe pipe clock gates
clk: rockchip: Add clock controller for the RV1103B
dt-bindings: clock: rockchip: Add RV1103B CRU support
