The HVS can change AXI request mode based on how full the COB
FIFOs are.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
With HVS channel 2 now being used for live video, change the
panic mode for all channels to be explicitly set by the driver,
and the same for all channels.
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-2-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
The HVS Composite Output Buffer (COB) is the memory used to
generate the output pixel data.
Until now the vc4 driver has been relying on the firmware to
have set these to sensible values.
In testing triple screen support it has been noted that only
1 line was being assigned to HVS channel 2. Whilst that is fine
for the transposer (TXP), and indeed needed as only some pixels
have an alpha channel, it is insufficient to run a live display.
Split the COB more evenly between the 3 HVS channels.
Fixes: c54619b0bf ("drm/vc4: Add support for the BCM2711 HVS5")
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
Link: https://lore.kernel.org/r/20221207-rpi-hvs-crtc-misc-v1-1-1f8e0770798b@cerno.tech
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Many panel drivers define dsi_dcs_write_seq() and dsi_generic_write_seq()
macros to send DCS commands and generic write packets respectively, with
the payload specified as a list of parameters instead of using arrays.
There's already a macro for the former, introduced by commit 2a9e9daf75
("drm/mipi-dsi: Introduce mipi_dsi_dcs_write_seq macro") so drivers can be
changed to use that. But there isn't one yet for the latter, let's add it.
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102202542.3494677-2-javierm@redhat.com
Replace the combination of bpp and depth with a single color-mode
argument. Handle special cases in simpledrm and ofdrm. Hard-code
XRGB8888 as fallback format for cases where no given format works.
The color-mode argument accepts the same values as the kernel's video
parameter. These are mostly bpp values between 1 and 32. The exceptions
are 15, which has a color depth of 15 and a bpp value of 16; and 32,
which has a color depth of 24 and a bpp value of 32.
v4:
* add back lost test for bpp_specified (Maira)
* add Fixes tag (Daniel)
v3:
* fix ofdrm build (Maxime)
v2:
* minimize changes (Daniel)
* use drm_driver_legacy_fb_format() (Daniel)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Maíra Canal <mcanal@igalia.com> # vc4 and vkms
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Fixes: 37c90d589d ("drm/fb-helper: Fix single-probe color-format selection")
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Javier Martinez Canillas <javierm@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20230106112324.22055-1-tzimmermann@suse.de
Use drm_connector's helpers enable_hpd and disable_hpd to enable and
disable HPD automatically by the means of drm_kms_helper_poll_*
functions. As the drm_bridge_connector_enable_hpd() and
drm_bridge_connector_disable_hpd() functions are now unused, replace
them with stubs to ease driver migration.
Enabling the HPD from drm_bridge_connector_init() can happen too early,
before the driver is prepared to handle HPD events. As the
drm_bridge_connector_enable_hpd() is empty anyway, drop this call
anyway.
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221102180705.459294-4-dmitry.baryshkov@linaro.org
The DRM helper drm_fb_build_fourcc_list() creates a list of color
formats for primary planes of the generic drivers. Simplify the helper:
- It used to mix and filter native and emulated formats as provided
by the driver. Now the only emulated format is XRGB8888, which is
required as fallback by legacy software. Drop support for emulating
any other formats.
- Also convert alpha formats to their non-alpha counterparts. Generic
drivers don't support primary planes with alpha formats and some
DTs incorrectly advertise alpha channels for non-alpha hardware. So
only export non-alpha formats for primary planes.
With the simplified helper, scrap format lists of the affected generic
drivers. All they need is the firmware buffer's native format, from which
the helper creates the list of color formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-13-tzimmermann@suse.de
Fix the color-format selection of the single-probe helper. Go
through all user-specified values and test each for compatibility
with the driver. If none is supported, use the driver-provided
default. This guarantees that the console is always available in
any color format at least.
Until now, the format selection of the single-probe helper tried
to either use a user-specified format or a 32-bit default format.
If the user-specified format was not supported by the driver, the
selection failed and the display remained blank.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-12-tzimmermann@suse.de
Add conversion from XRGB8888 to XRGB1555, ARGB1555 and RGBA5551, which
are the formats currently supported by the simplefb infrastructure. The
new helpers allow the output of XRGB8888 framebuffers to firmware
scanout buffers in one of the 15-bit formats.
v3:
* use __le* for destination buffers (Jose, kernel test robot)
v2:
* test 15-bit results with local endianness (Jose)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Reviewed-by: José Expósito <jose.exposito89@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-10-tzimmermann@suse.de
Upcoming changes to the format conversion will mostly blit from
XRGB8888 to some other format. So put the source format in blit's
outer branches to make the code more readable. For cases where
a format only changes its endianness, such as XRGB565, introduce
dedicated branches that handle this for all formats.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-7-tzimmermann@suse.de
Select color format for EFI/VESA firmware scanout buffer from the
number of bits per pixel and the position of the individual color
components. Fixes the selected format for the buffer in several odd
cases. For example, XRGB1555 has been reported as ARGB1555 because
of the different use of depth and transparency in VESA and Linux.
Bits-per-pixel is always the pixel's raw number of bits; including
alpha and filler bits. It is preferred over color depth, which has a
different meaning among various components and standards.
Also do not compare reserved bits and transparency bits to each other.
These values have different meanings, as reserved bits include filler
bits while transparency does not.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20230102112927.26565-2-tzimmermann@suse.de
The pixel data for the ILI9486 is always 16-bits wide and it must be
sent over the SPI bus. When the controller is only able to deal with
8-bit transfers, this 16-bits data needs to be swapped before the
sending to account for the big endian bus, this is on the contrary not
needed when the SPI controller already supports 16-bits transfers.
The decision about swapping the pixel data or not is taken in the MIPI
DBI code by probing the controller capabilities: if the controller only
suppors 8-bit transfers the data is swapped, otherwise it is not.
This swapping/non-swapping is relying on the assumption that when the
controller does support 16-bit transactions then the data is sent
unswapped in 16-bits-per-word over SPI.
The problem with the ILI9486 driver is that it is forcing 8-bit
transactions also for controllers supporting 16-bits, violating the
assumption and corrupting the pixel data.
Align the driver to what is done in the MIPI DBI code by adjusting the
transfer size to the maximum allowed by the SPI controller.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Carlo Caione <ccaione@baylibre.com>
Reviewed-by: Kamlesh Gurudasani <kamlesh.gurudasani@gmail.com>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20221116-s905x_spi_ili9486-v4-2-f86b4463b9e4@baylibre.com
Although the device-centered debugfs functions can track requests for
the addition of DRM debugfs files at any time and have them added all
at once during drm_dev_register(), they are not able to create debugfs
files for modeset components, as they are registered after the primary
and the render drm_minor are registered.
So, create a drm_debugfs_late_register() function, which is responsible
for dealing with the creation of all the debugfs files for modeset
components at once. Therefore, the functions drm_debugfs_add_file()
and drm_debugfs_add_files() can be used in late_register hooks.
Signed-off-by: Maíra Canal <mcanal@igalia.com>
Reviewed-by: Melissa Wen <mwen@igalia.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Maíra Canal <mairacanal@riseup.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20221219120621.15086-4-mcanal@igalia.com
