When I added support for the hpd-gpio to simple-panel in commit
48834e6084 ("drm/panel-simple: Support hpd-gpios for delaying
prepare()"), I added a special case to handle a circular dependency I
was running into on the ti-sn65dsi86 bridge chip. On my board the
hpd-gpio is actually provided by the bridge chip. That was causing
some circular dependency problems that I had to work around by getting
the hpd-gpio late.
I've now reorganized the ti-sn65dsi86 bridge chip driver to be a
collection of sub-drivers. Now the GPIO part can probe separately and
that breaks the chain. Let's get rid of the old code to clean things
up.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Bjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.10.I40eeedc23459d1e3fc96fa6cdad775d88c6e706c@changeid
Let's use the newly minted aux bus to break up the driver into sub
drivers. We're not doing a full breakup here: all the code is still in
the same file and remains largely untouched. The big goal here of
using sub-drivers is to allow part of our code to finish probing even
if some other code needs to defer. This can solve some chicken-and-egg
problems. Specifically:
- In commit 48834e6084 ("drm/panel-simple: Support hpd-gpios for
delaying prepare()") we had to add a bit of a hack to simpel-panel
to support HPD showing up late. We can get rid of that hack now
since the GPIO part of our driver can finish probing early.
- We have a desire to expose our DDC bus to simple-panel (and perhaps
to a backlight driver?). That will end up with the same
chicken-and-egg problem. A future patch to move this to a sub-driver
will fix it.
- If/when we support the PWM functionality present in the bridge chip
for a backlight we'll end up with another chicken-and-egg
problem. If we allow the PWM to be a sub-driver too then it solves
this problem.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210423095743.v5.9.I3e68fa38c4ccbdbdf145cad2b01e83a1e5eac302@changeid
We register the simplekms device with the DRM platform helpers. A
native driver for the graphics hardware will kick-out the simpledrm
driver before taking over the device.
The original generic platform device from the simple-framebuffer boot
code will be unregistered. The native driver will use whatever native
hardware device it received.
v4:
* convert to drm_aperture_acquire_from_firmware()
v3:
* use platform_device_unregister() and handle detachment
like hot-unplug event (Daniel)
v2:
* adapt to aperture changes
* use drm_dev_unplug() and drm_dev_enter/exit()
* don't split error string
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-10-tzimmermann@suse.de
The simpledrm driver is a DRM driver for simple-framebuffer framebuffers
as provided by the kernel's boot code. This driver enables basic
graphical output on many different graphics devices that are provided
by the platform (e.g., EFI, VESA, embedded framebuffers).
With the kernel's simple-framebuffer infrastructure, the kernel receives
a pre-configured framebuffer from the system (i.e., firmware, boot
loader). It creates a platform device to which simpledrm attaches.
The system's framebuffer consists of a memory range, size and format.
Based on these values, simpledrm creates a DRM devices. No actual
modesetting is possible.
A firmware framebuffer might also be specified via device-tree files. If
no device platform data is given, try the DT device node.
Make sure required hardware clocks and regulators are enabled while the
firmware framebuffer is in use. The basic code has been taken from the
simplefb driver and adapted to DRM. Clocks are released automatically
via devres helpers.
The drivers displays a console on simpledrm's framebuffer. The default
framebuffer format is being used.
v4:
* disable simplefb if simpledrm has been selected (Maxime)
v3:
* add disable function that clears screen to black (Daniel)
* set shadow buffering only for fbdev emulation
* set platform-driver data during device creation
v2:
* rename driver to simpledrm
* add dri-devel to MAINTAINERS entry
* put native format first in primary-plane format list (Daniel)
* inline simplekms_device_cleanup() (Daniel)
* use helpers for shadow-buffered planes
* fix whitespace errors
* add Device Tree match table
* clean-up parser wrappers
* use strscpy()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch> # fbdev support
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-5-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-6-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-7-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-8-tzimmermann@suse.de
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-9-tzimmermann@suse.de
Platform devices might operate on firmware framebuffers, such as VESA or
EFI. Before a native driver for the graphics hardware can take over the
device, it has to remove any platform driver that operates on the firmware
framebuffer. Aperture helpers provide the infrastructure for platform
drivers to acquire firmware framebuffers, and for native drivers to remove
them later on.
It works similar to the related fbdev mechanism. During initialization, the
platform driver acquires the firmware framebuffer's I/O memory and provides
a callback to be removed. The native driver later uses this information to
remove any platform driver for it's framebuffer I/O memory.
The aperture removal code is integrated into the existing code for removing
conflicting framebuffers, so native drivers use it automatically.
v5:
* fix build error introduced by rebasing v4
* fix typo in documentation
v4:
* hide detach callback in implementation (Daniel)
* documentation fixes
v3:
* rebase onto existing aperture infrastructure
* release aperture from list during detach; fix dangling apertures
* don't export struct drm_aperture
* document struct drm_aperture_funcs
v2:
* rename plaform helpers to aperture helpers
* tie to device lifetime with devm_ functions
* removed unsued remove() callback
* rename kickout to detach
* make struct drm_aperture private
* rebase onto existing drm_aperture.h header file
* use MIT license only for simplicity
* documentation
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Acked-by: Maxime Ripard <maxime@cerno.tech>
Tested-by: nerdopolis <bluescreen_avenger@verizon.net>
Link: https://patchwork.freedesktop.org/patch/msgid/20210430105840.30515-4-tzimmermann@suse.de
[why]
DP 1.4a spec mandates that if DP_EXTENDED_RECEIVER_CAP_FIELD_PRESENT is
set, Extended Base Receiver Capability DPCD space must be used. Without
doing that, the three DPCD values that differ will be wrong, leading to
incorrect or limited functionality. MST link rate, for example, could
have a lower value. Also, Synaptics quirk wouldn't work out well when
Extended DPCD was not read, resulting in no DSC for such hubs.
[how]
Modify MST topology manager to use the values from Extended DPCD where
applicable.
To prevent regression on the sources that have a lower maximum link rate
capability than MAX_LINK_RATE from Extended DPCD, have the drivers
supply maximum lane count and rate at initialization time.
This also reverts commit 2dcab875e7 ("Revert drm/dp_mst: Retrieve
extended DPCD caps for topology manager"), brining the change back to the
original commit ad44c03208 ("drm/dp_mst: Retrieve extended DPCD caps for
topology manager").
Signed-off-by: Nikola Cornij <nikola.cornij@amd.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Lyude Paul <lyude@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210429221151.22020-2-nikola.cornij@amd.com
Add support to overlay plane, in addition to primary and cursor
planes. In this approach, the plane composition still requires an
active primary plane and planes are composed associatively in the
order: (primary <- overlay) <- cursor
It enables to run the following IGT tests successfully:
- kms_plane_cursor:
- pipe-A-[overlay, primary, viewport]-size-[64, 128, 256]
- kms_atomic:
- plane-overlay-legacy
and preserves the successful execution of kms_cursor_crc,
kms_writeback and kms_flip
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/8261bf93d8a0e3ffaf81d8e7c9b3e9c229116be3.1619250933.git.melissa.srw@gmail.com
Add support for composing XRGB888 planes in addition to the ARGB8888
format. In the case of an XRGB plane at the top, the composition consists
of copying the RGB values of a pixel from src to dst and clearing alpha
channel, without the need for alpha blending operations for each pixel.
Blend equations assume a completely opaque background, i.e., primary plane
is not cleared before pixel blending but alpha channel is explicitly
opaque (a = 0xff). Also, there is room for performance evaluation in
switching pixel blend operation according to the plane format.
v4:
- clear alpha channel (0xff) after blend color values by pixel
- improve comments on blend ops to reflect the current state
- describe in the commit message future improvements for plane composition
Signed-off-by: Melissa Wen <melissa.srw@gmail.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/07bcf4643d11da9480599fe1b165e478bff58b25.1619250933.git.melissa.srw@gmail.com
idr_init() uses base 0 which is an invalid identifier for this driver.
The idr_alloc for this driver uses 1 as start value for ID range. The
new function idr_init_base allows IDR to set the ID lookup from base 1.
This avoids all lookups that otherwise starts from 0 since 0 is always
unused / available.
References: commit 6ce711f275 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Signed-off-by: Zack Rusin <zackr@vmware.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105190718.GA89863@localhost
