The way any singular display pipeline, in need of a modeset, gets
enabled is as follows -
crtc enable
(all) bridge pre-enable
encoder enable
(all) bridge enable
- and the disable sequence is exactly the reverse of this.
The crtc operations occur by looping over the old and new crtc states,
while the encoder and bridge operations occur together, by looping over
the connector states of the display pipelines.
Refactor these operations - crtc enable/disable, and encoder & bridge
(pre/post) enable/disable - into separate functions each, to make way
for the re-ordering of the enable/disable sequences.
This patch doesn't alter the sequence of crtc/encoder/bridge operations
in any way, but helps to cleanly pave the way for the next two patches,
by maintaining logical bisectability.
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ideasonboard.com>
Tested-by: Alexander Sverdlin <alexander.sverdlin@siemens.com>
Signed-off-by: Aradhya Bhatia <a-bhatia1@ti.com>
Signed-off-by: Aradhya Bhatia <aradhya.bhatia@linux.dev>
Tested-by: Devarsh Thakkar <devarsht@ti.com>
Link: https://lore.kernel.org/r/20250605171524.27222-2-aradhya.bhatia@linux.dev
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Currently, we pick the MMIO offset based on the size of the pgoff_t
type seen by the process that manipulates the FD, such that a 32-bit
process can always map the user MMIO ranges. But this approach doesn't
work well for emulators like FEX, where the emulator is a 64-bit binary
which might be executing 32-bit code. In that case, the kernel thinks
it's the 64-bit process and assumes DRM_PANTHOR_USER_MMIO_OFFSET_64BIT
is in use, but the UMD library expects DRM_PANTHOR_USER_MMIO_OFFSET_32BIT,
because it can't mmap() anything above the pgoff_t size.
In order to solve that, we need a way to explicitly set the user MMIO
offset from the UMD, such that the kernel doesn't have to guess it
from the TIF_32BIT flag set on user thread. We keep the old behavior
if DRM_PANTHOR_SET_USER_MMIO_OFFSET is never called.
Changes in v2:
- Drop the lock/immutable fields and allow SET_USER_MMIO_OFFSET
requests to race with mmap() requests
- Don't do the is_user_mmio_offset test twice in panthor_mmap()
- Improve the uAPI docs
Changes in v3:
- Bump to version 1.5 instead of 1.4 after rebasing
- Add R-bs
- Fix/rephrase comment as suggested by Liviu
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Link: https://lore.kernel.org/r/20250606080932.4140010-3-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
drm_panthor_gpu_info::shader_present is currently automatically offset
by 4 byte to meet Arm's 32-bit/64-bit field alignment rules, but those
constraints don't stand on 32-bit x86 and cause a mismatch when running
an x86 binary in a user emulated environment like FEX. It's also
generally agreed that uAPIs should explicitly pad their struct fields,
which we originally intended to do, but a mistake slipped through during
the submission process, leading drm_panthor_gpu_info::shader_present to
be misaligned.
This uAPI change doesn't break any of the existing users of panthor
which are either arm32 or arm64 where the 64-bit alignment of
u64 fields is already enforced a the compiler level.
Changes in v2:
- Rename the garbage field into pad0 and adjust the comment accordingly
- Add Liviu's A-b
Changes in v3:
- Add R-bs
Fixes: 0f25e493a2 ("drm/panthor: Add uAPI")
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250606080932.4140010-2-boris.brezillon@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
It's unclear why I originally wrote in the description of
`prepare_to_enable` that "This is not specified in a standard way on
eDP timing diagrams" and then also wrote "It is effectively the time
from HPD going high till you can turn on the backlight." It seems
pretty clear that it's (T4+T5+T6+T8)-min. Either I was confused when I
wrote this or I was looking at some strange panel datasheet that I can
no longer find.
Update the description of the field so it's easier for people to fill
this in. Couch the description with "usually" in case there really was
some weird datasheet where things were specified in a different way.
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250521173204.1.Ic0375a9360698592f27afbf1f60f4996d504ed4f@changeid
Timings taken from the datasheet and the display is working in DE mode,
thus the datasheet only specifies the blanking period. sync, back porch
and front porch are arbitrarily chosen.
The datasheet can be found at [1] but for reference these are the
relevant timings:
sym | | min | typ | max | unit |
------|--------------+------+------+------+------+
Tv | V period | 1094 | 1130 | 1836 | Th |
| V active | 1080 | 1080 | 1080 | Th |
| V blanking | 14 | 50 | 756 | Th |
Fv | V frequency | 49 | 60 | 76 | Hz |
Th | H period | 1000 | 1050 | 1678 | Tclk |
| H active | 960 | 960 | 960 | Tclk |
| H blanking | 40 | 90 | 718 | Tclk |
Fh | H frequency | 53.7 | 67.8 | 90.0 | kHz |
Tclk | LVDS clock | 53.7 | 71.2 | 90.0 | MHz |
Keep in mind that this is a dual link LVDS panel and the horizontal
timings are only for one half of the panel.
[1] https://www.fortec-integrated.de/fileadmin/pdf/produkte/TFT-Displays/AUO/P238HAN01.0_Datasheet.pdf
Signed-off-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
Link: https://lore.kernel.org/r/20250520074439.655749-2-mwalle@kernel.org
Move the define outside the ifdef for CONFIG_DEBUG_FS to fix the build.
This currently breaks drm kunit tests:
$ ./tools/testing/kunit/kunit.py run --kunitconfig drivers/gpu/drm/ttm/tests/.kunitconfig
ERROR:root:../drivers/gpu/drm/ttm/ttm_pool.c: In function ‘ttm_pool_mgr_init’:
../drivers/gpu/drm/ttm/ttm_pool.c:1335:30: error: ‘TTM_SHRINKER_BATCH’ undeclared (first use in this function)
1335 | mm_shrinker->batch = TTM_SHRINKER_BATCH;
Fixes: 22b929b252 ("drm/ttm: Increase pool shrinker batch target")
Cc: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250603184750.3304647-2-lucas.demarchi@intel.com
With the goal of reducing the need for drivers to touch (and dereference)
fence->ops, we move the 64-bit seqnos flag from struct dma_fence_ops to
the fence->flags.
Drivers which were setting this flag are changed to use new
dma_fence_init64() instead of dma_fence_init().
v2:
* Streamlined init and added kerneldoc.
* Rebase for amdgpu userq which landed since.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Reviewed-by: Christian König <christian.koenig@amd.com> # v1
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250515095004.28318-3-tvrtko.ursulin@igalia.com
Currently the TTM shrinker aborts shrinking as soon as it frees pages from
any of the page order pools and by doing so it can fail to respect the
freeing target which was configured by the shrinker core.
We use the wording "can fail" because the number of freed pages will
depend on the presence of pages in the pools and the order of the pools on
the LRU list. For example if there are no free pages in the high order
pools the shrinker core may require multiple passes over the TTM shrinker
before it will free the default target of 128 pages (assuming there are
free pages in the low order pools). This inefficiency can be compounded by
the pool LRU where multiple further calls into the TTM shrinker are
required to end up looking at the pool with pages.
Improve this by never freeing less than the shrinker core has requested.
At the same time we start reporting the number of scanned pages (freed in
this case), which prevents the core shrinker from giving up on the TTM
shrinker too soon and moving on.
v2:
* Simplify loop logic. (Christian)
* Improve commit message.
Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Tvrtko Ursulin <tursulin@ursulin.net>
Link: https://lore.kernel.org/r/20250603112750.34997-2-tvrtko.ursulin@igalia.com
[WHY]
1. Drivers using DRM_GEM_SHADOW_PLANE_HELPER_FUNCS and
DRM_GEM_SHMEM_DRIVER_OPS (e.g., udl, ast) do not require
sg_table import.
They only need dma_buf_vmap() to access the shared buffer's
kernel virtual address.
2. On certain Aspeed-based boards, a dma_mask of 0xffff_ffff may
trigger SWIOTLB during dmabuf import. However, IO_TLB_SEGSIZE
restricts the maximum DMA streaming mapping memory, resulting in
errors like:
ast 0000:07:00.0: swiotlb buffer is full (sz: 3145728 bytes), total 32768 (slots), used 0 (slots)
[HOW]
Provide a gem_prime_import implementation without sg_table mapping
to avoid issues (e.g., "swiotlb buffer is full"). Drivers that do not
require sg_table can adopt this.
Signed-off-by: Shixiong Ou <oushixiong@kylinos.cn>
Acked-by: Thomas Zimmermann <tzimmermann@suse.de>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250522070714.439824-1-oushixiong1025@163.com
This change is essentially a Panfrost port of commit a3707f53eb
("drm/panthor: show device-wide list of DRM GEM objects over DebugFS").
The DebugFS file is almost the same as in Panthor, minus the GEM object
usage flags, since Panfrost has no kernel-only BO's.
Two additional GEM state flags which are displayed but aren't relevant
to Panthor are 'Purged' and 'Purgeable', since Panfrost implements an
explicit shrinker and a madvise ioctl to flag objects as reclaimable.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250520174634.353267-5-adrian.larumbe@collabora.com
Perfcnt samples buffer is not exposed to UM, but we would like to keep
a tag on it as a potential debug aid.
PRIME imported GEM buffers are UM exposed, but since the usual Panfrost
UM driver code path is not followed in their creation, they might remain
unlabelled for their entire lifetime, so a generic tag was deemed
preferable. The tag is assigned before a UM handle is created so it
doesn't contradict the logic about labelling internal BOs.
Signed-off-by: Adrián Larumbe <adrian.larumbe@collabora.com>
Reviewed-by: Boris Brezillon <boris.brezillon@collabora.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Signed-off-by: Steven Price <steven.price@arm.com>
Link: https://lore.kernel.org/r/20250520174634.353267-3-adrian.larumbe@collabora.com
There is no need for separate locks for single jobs and the entire
scheduler. The dma_fence context can be protected by the scheduler lock,
allowing for removing the jobs' locks. This simplifies things and
reduces the likelyhood of deadlocks etc.
Replace the jobs' locks with the mock scheduler lock.
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@igalia.com>
Signed-off-by: Philipp Stanner <phasta@kernel.org>
Link: https://lore.kernel.org/r/20250527101029.56491-2-phasta@kernel.org
Replace the calls to drm_atomic_get_connector_state() with
drm_atomic_get_new_connector_state() for cases which do not require
allocating the connector state, e.g. after drm_atomic_check_only() when
the intent is to only read the new connector state.
The rational is to avoid the need to handle the potential EDEADLK error
returned by the former helper, which would require restarting the entire
atomic sequence.
Acked-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-13-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Factor out the HDMI connector initialization from
drm_kunit_helper_connector_hdmi_init_funcs() into a common
__connector_hdmi_init() function, while extending its functionality to
allow setting custom (i.e. non-default) EDID data.
Introduce a macro as a wrapper over the new helper to allow dropping the
open coded EDID setup from all test cases.
The actual conversion will be handled separately; for now just apply it
to drm_kunit_helper_connector_hdmi_init() helper.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-9-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
In preparation to support fallback to an alternative output format, e.g.
YUV420, when RGB cannot be used for any of the available color depths,
move the bpc try loop out of hdmi_compute_config() and, instead, make it
part of hdmi_compute_format(), while adding a new parameter to the
latter holding the output format to be checked and eventually set.
Since this helper now also changes hdmi.output_bpc in addition to
hdmi.output_format, highlight the extended functionality by renaming it
to hdmi_compute_format_bpc().
This improves code reusability and further extensibility, without
introducing any functional changes.
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Link: https://lore.kernel.org/r/20250527-hdmi-conn-yuv-v5-5-74c9c4a8ac0c@collabora.com
Signed-off-by: Maxime Ripard <mripard@kernel.org>
