[WHY]
Counter j was not updated to present the num of writeback_info when
writeback pipes are removed.
[HOW]
update j (num of writeback info) under the correct condition.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
hw_points_num is 0 before ogam LUT is programmed; however, function
"dwb3_program_ogam_pwl" assumes hw_points_num is always greater than 0,
i.e. substracting it by 1 as an array index.
[HOW]
Check hw_points_num is not equal to 0 before using it.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
wb_enabled field is set to false before it is used, and the following
code will never be executed.
[HOW]
Setting wb_enable to false after all removal work is completed.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
The enable and disable writeback calls need to be included in the
coressponding functions in dc_stream.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Writeback connectors don't have a physical sink but DC still
needs a sink to function. Create a fake sink and stream for
writeback connectors
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We need to track the dc_link and it would get confusing if
re-using the amdgpu_dm_connector.
[HOW]
Creating new amdgpu_dm_wb_connector.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Again, we need to use this function for writeback connectors,
which are not of type amdgpu_dm_connector. Use the common base
drm_connector instead.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
We need to use this function for both amdgpu_dm_connectors
and drm_writeback_connectors. Modify it to operate on
a drm_connector as a common base.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
I think this was an abstraction back from when
kfd supported both radeon and amdgpu. Since we just
support amdgpu now, there is no more need for this and
we can use the amdgpu structures directly.
This also avoids having the kfd_cu_info structures on
the stack when inlining which can blow up the stack.
Cc: Arnd Bergmann <arnd@kernel.org>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
We will be dealing with two types of connector: amdgpu_dm_connector
and drm_writeback_connector.
[HOW]
We want to find both and then cast to the appriopriate type afterwards.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Writeback connectors are based on a different object:
drm_writeback_connector, and are therefore different from
amdgpu_dm_connector. We need to be careful to ensure code
designed for amdgpu_dm_connector doesn't inadvertently try
to operate on a drm_writeback_connector.
[HOW]
Skip them when connector type is DRM_MODE_CONNECTOR_WRITEBACK.
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
prange->svm_bo unref can happen in both mmu callback and a callback after
migrate to system ram. Both are async call in different tasks. Sync svm_bo
unref operation to avoid random "use-after-free".
Signed-off-by: Xiaogang Chen <xiaogang.chen@amd.com>
Reviewed-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Jesse Zhang <Jesse.Zhang@amd.com>
Tested-by: Jesse Zhang <Jesse.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
As part of IP discovery early_init is run for all HW IP blocks.
During this phase all firmware is supposed to be identified that may
be missing so that the driver can avoid releasing resources used by
the EFI framebuffer or simpledrm until the last possible moment.
Move microcode loading from sw_init to early_init.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
This patch fixes a null pointer dereference in the error message that is
printed when the Display Core (DC) fails to initialize. The original
message includes the DC version number, which is undefined if the DC is
not initialized.
Fixes: 9788d087ca ("drm/amd/display: improve the message printed when loading DC")
Signed-off-by: Cong Liu <liucong2@kylinos.cn>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error path for SDMA firmware loading is unnecessarily noisy.
When a firmware is missing 3 errors show up:
```
amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_sdma.bin failed with error -2
[drm:sdma_v4_0_early_init [amdgpu]] *ERROR* Failed to load sdma firmware!
[drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <sdma_v4_0> failed -19
```
The error code for the device init is bubbled up already, remove the
second one.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pass the correct size to smu_v13_0_6_print_clks, otherwise
the same place in buf will be re-written.
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The allow_xgmi_power_down(true/false) will be generally replaced by:
- allow: select_xgmi_plpd_policy(XGMI_PLPD_DEFAULT)
- disallow: select_xgmi_plpd_policy(XGMI_PLPD_DISALLOW)
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Assign DEFAULT mode if it supports plpd, otherwise keeps NONE
v2: reduce ip version checks
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why & How]
These DPCD addresses are either declared in other header files
where it makes more sense or simply not used by any DC code.
Remove them to reduce redundancies and potential confusion.
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Stylon Wang <stylon.wang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHY]
Previously this only excluded build for a few amdgpu_dm
binaries which makes no sense.
[HOW]
Wrap the entire Makefile in "ifneq ($(CONFIG_DRM_AMD_DC),)"
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
The error path for DMUB firmware loading is unnecessarily noisy.
When a firmware is missing 3 errors show up:
```
amdgpu 0000:07:00.0: Direct firmware load for amdgpu/green_sardine_dmcub.bin failed with error -2
[drm:dm_early_init [amdgpu]] *ERROR* DMUB firmware loading failed: -19
[drm:amdgpu_device_init [amdgpu]] *ERROR* early_init of IP block <dm> failed -19
```
The error code for the device init is bubbled up already, remove the
second one.
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
If new range is splited to multiple pranges with max_svm_range_pages
alignment and added to update_list, svm validate and map should keep
going after error to make sure prange->mapped_to_gpu flag is up to date
for the whole range.
svm validate and map update set prange->mapped_to_gpu after mapping to
GPUs successfully, otherwise clear prange->mapped_to_gpu flag (for
update mapping case) instead of setting error flag, we can remove
the redundant error flag to simpliy code.
Refactor to remove goto and update prange->mapped_to_gpu flag inside
svm_range_lock, to guarant we always evict queues or unmap from GPUs if
there are invalid ranges.
After svm validate and map return error -EAGIN, the caller retry will
update the mapping for the whole range again.
Fixes: c22b044070 ("drm/amdkfd: flag added to handle errors from svm validate and map")
Signed-off-by: Philip Yang <Philip.Yang@amd.com>
Reviewed-by: Felix Kuehling <Felix.Kuehling@amd.com>
Tested-by: James Zhu <james.zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add the interface to change xgmi per-link power down policy.
v2: split from sysfs interface code and miscellaneous updates
v3: check against XGMI_PLPD_DEFAULT/XGMI_PLPD_OPTIMIZED and
pass PPSMC param
Signed-off-by: Le Ma <le.ma@amd.com>
Reviewed-by: Asad Kamal <asad.kamal@amd.com>
Reviewed-by: Lijo Lazar <lijo.lazar@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AMD_IP_BLOCK_TYPE_VPE is a new IP BLOCK type for Video Processing Engine,
but currently lacks description.
Fix the documentation warning:
warning: Enum value 'AMD_IP_BLOCK_TYPE_VPE' not described in
enum 'amd_ip_block_type'
Signed-off-by: Juntong Deng <juntong.deng@outlook.com>
Reviewed-by: Lang Yu <lang.yu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DC code is reused by other OSes and so Linux return codes don't
make sense. Change dc_set_power_state() to boolean and add a wrapper
dm_set_power_state() to return a Linux error code for the memory
allocation failure.
Suggested-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
AGP aperture is deprecated and no longer functional.
v2: fix typo (Alex)
v3: just skip the agp setup call
v4: revert back to the original model
v5: back to v3
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
err_event_athub will corrupt VCPU buffer and not good to
be restored in amdgpu_vcn_resume() and in this case
the VCPU buffer needs to be cleared for VCN firmware to
work properly.
Acked-by: Leo Liu <leo.liu@amd.com>
Signed-off-by: David (Ming Qiang) Wu <David.Wu3@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
