x86 removed -pipe in commit 437e88ab8f ("x86/build: Remove -pipe from
KBUILD_CFLAGS") and the newer arm64 and riscv seem to have never used it,
so that seems to be the way the world's going.
Compile performance building defconfig on a POWER10 PowerNV system
was in the noise after 10 builds each. No point in adding options unless
they help something, so remove it.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230606064830.184083-1-npiggin@gmail.com
Looking at generated code for handle_signal32() shows calls to a
function called __unsafe_save_user_regs.constprop.0 while user access
is open.
And that __unsafe_save_user_regs.constprop.0 function has two nops at
the begining, allowing it to be traced, which is unexpected during
user access open window.
The solution could be to mark __unsafe_save_user_regs() no trace, but
to be on the safe side the most efficient is to flag it __always_inline
as already done for function __unsafe_restore_general_regs(). The
function is relatively small and only called twice, so the size
increase will remain in the noise.
Do the same with save_tm_user_regs_unsafe() as it may suffer the
same issue.
Fixes: ef75e73182 ("powerpc/signal32: Transform save_user_regs() and save_tm_user_regs() in 'unsafe' version")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/7e469c8f01860a69c1ada3ca6a5e2aa65f0f74b2.1685955220.git.christophe.leroy@csgroup.eu
A disassembly of interrupt_exit_kernel_prepare() shows a useless read
of MSR register. This is shown by r9 being re-used immediately without
doing anything with the value read.
c000e0e0: 60 00 00 00 nop
c000e0e4: 7d 3a c2 a6 mfmd_ap r9
c000e0e8: 7d 20 00 a6 mfmsr r9
c000e0ec: 7c 51 13 a6 mtspr 81,r2
c000e0f0: 81 3f 00 84 lwz r9,132(r31)
c000e0f4: 71 29 80 00 andi. r9,r9,32768
This is due to the use of local_irq_save(). The flags read by
local_irq_save() are never used, use local_irq_disable() instead.
Fixes: 13799748b9 ("powerpc/64: use interrupt restart table to speed up return from interrupt")
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/df36c6205ab64326fb1b991993c82057e92ace2f.1685955214.git.christophe.leroy@csgroup.eu
Activating KCSAN on a 32 bits architecture leads to the following
link-time failure:
LD .tmp_vmlinux.kallsyms1
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_load':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_load_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_store':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_store_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_exchange':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_add':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_add_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_sub':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_sub_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_and':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_and_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_or':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_or_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_xor':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_xor_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_fetch_nand':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_fetch_nand_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_strong':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_weak':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
powerpc64-linux-ld: kernel/kcsan/core.o: in function `__tsan_atomic64_compare_exchange_val':
kernel/kcsan/core.c:1273: undefined reference to `__atomic_compare_exchange_8'
32 bits architectures don't have 64 bits atomic builtins. Only
include DEFINE_TSAN_ATOMIC_OPS(64) on 64 bits architectures.
Fixes: 0f8ad5f2e9 ("kcsan: Add support for atomic builtins")
Suggested-by: Marco Elver <elver@google.com>
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Reviewed-by: Marco Elver <elver@google.com>
Acked-by: Marco Elver <elver@google.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/d9c6afc28d0855240171a4e0ad9ffcdb9d07fceb.1683892665.git.christophe.leroy@csgroup.eu
When CONFIG_SMP is not set, CONFIG_BROKEN_ON_SMP is set, and
CONFIG_PCI is not set, there can be a kconfig warning:
WARNING: unmet direct dependencies detected for PPC_INDIRECT_PCI
Depends on [n]: PCI [=n]
Selected by [y]:
- MPC10X_BRIDGE [=y]
To fix that, make the selects of MPC10X_BRIDGE be conditional
on PCI and use "imply" instead of "select".
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Suggested-by: Michael Ellerman <mpe@ellerman.id.au> # use "imply"
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230521225103.19197-1-rdunlap@infradead.org
Michael is merging KVM PPC patches via the powerpc tree and KVM topic
branches. He doesn't necessarily have time to be across all of KVM so
is reluctant to call himself maintainer, but for the mechanics of how
patches flow upstream, it is maintained and does make sense to have
some contact people in MAINTAINERS.
So add Michael Ellerman as KVM PPC maintainer and myself as reviewer.
Split out the subarchs that don't get so much attention.
Signed-off-by: Nicholas Piggin <npiggin@gmail.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230608024504.58189-1-npiggin@gmail.com
kallsyms_lookup() which in turn calls kallsyms_lookup_buildid() writes
to index "KSYM_NAME_LEN - 1".
Thus the array passed as namebuf to kallsyms_lookup() should be
KSYM_NAME_LEN in size.
In xmon.c the array was defined to be "128" bytes directly, without
using KSYM_NAME_LEN. Commit b8a94bfb33 ("kallsyms: increase maximum
kernel symbol length to 512") changed the value to 512, but missed
updating the xmon code.
Fixes: b8a94bfb33 ("kallsyms: increase maximum kernel symbol length to 512")
Cc: stable@vger.kernel.org # v6.1+
Co-developed-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Onkarnath <onkarnath.1@samsung.com>
Signed-off-by: Maninder Singh <maninder1.s@samsung.com>
[mpe: Tweak change log wording and fix commit reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230529111337.352990-2-maninder1.s@samsung.com
Currently in tce_freemulti_pSeriesLP() there is no limit on how many
TCEs are passed to the H_STUFF_TCE hcall. This has not caused an issue
until now, but newer firmware releases have started enforcing a limit of
512 TCEs per call.
The limit is correct per the specification (PAPR v2.12 § 14.5.4.2.3).
The code has been in it's current form since it was initially merged.
Cc: stable@vger.kernel.org
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
[mpe: Tweak change log wording & add PAPR reference]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525143454.56878-1-gbatra@linux.vnet.ibm.com
The recently added P10 AES/GCM code added some files containing
CRYPTOGAMS perl-asm code which are near duplicates of the p8 files
found in drivers/crypto/vmx.
In particular the newly added files produce functions with identical
names to the existing code.
When the kernel is built with CONFIG_CRYPTO_AES_GCM_P10=y and
CONFIG_CRYPTO_DEV_VMX_ENCRYPT=y that leads to link errors, eg:
ld: drivers/crypto/vmx/aesp8-ppc.o: in function `aes_p8_set_encrypt_key':
(.text+0xa0): multiple definition of `aes_p8_set_encrypt_key'; arch/powerpc/crypto/aesp8-ppc.o:(.text+0xa0): first defined here
...
ld: drivers/crypto/vmx/ghashp8-ppc.o: in function `gcm_ghash_p8':
(.text+0x140): multiple definition of `gcm_ghash_p8'; arch/powerpc/crypto/ghashp8-ppc.o:(.text+0x2e4): first defined here
Fix it for now by renaming the newly added files and functions to use
"p10" instead of "p8" in the names.
Fixes: 45a4672b9a ("crypto: p10-aes-gcm - Update Kconfig and Makefile")
Tested-by: Vishal Chourasia <vishalc@linux.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230525150501.37081-1-mpe@ellerman.id.au
Commit 1e8fed873e ("powerpc: drop ranges for definition of
ARCH_FORCE_MAX_ORDER") removed the limits on the possible values for
ARCH_FORCE_MAX_ORDER.
However removing the ranges entirely causes some common work flows to
break. For example building a defconfig (which uses 64K pages), changing
the page size to 4K, and rebuilding used to work, because
ARCH_FORCE_MAX_ORDER would be clamped to 12 by the ranges.
With the ranges removed it creates a kernel that builds but crashes at
boot:
kernel BUG at mm/huge_memory.c:470!
Oops: Exception in kernel mode, sig: 5 [#1]
...
NIP hugepage_init+0x9c/0x278
LR do_one_initcall+0x80/0x320
Call Trace:
do_one_initcall+0x80/0x320
kernel_init_freeable+0x304/0x3ac
kernel_init+0x30/0x1a0
ret_from_kernel_user_thread+0x14/0x1c
The reasoning for removing the ranges was that some of the values were
too large. So take that into account and limit the maximums to 10 which
is the default max, except for the 4K case which uses 12.
Fixes: 1e8fed873e ("powerpc: drop ranges for definition of ARCH_FORCE_MAX_ORDER")
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230519113806.370635-1-mpe@ellerman.id.au
For an SR-IOV device, while enabling DDW, a new table is created and
added at index 1 in the group. In the below 2 scenarios, the table is
incorrectly referenced at index 0 (which is where the table is for
default DMA window).
1. When adding DDW
This issue is exposed with "slub_debug". Error thrown out from
dma_iommu_dma_supported()
Warning: IOMMU offset too big for device mask
mask: 0xffffffff, table offset: 0x800000000000000
2. During Dynamic removal of the PCI device.
Error is from iommu_tce_table_put() since a NULL table pointer is
passed in.
Fixes: 381ceda88c ("powerpc/pseries/iommu: Make use of DDW for indirect mapping")
Cc: stable@vger.kernel.org # v5.15+
Signed-off-by: Gaurav Batra <gbatra@linux.vnet.ibm.com>
Reviewed-by: Brian King <brking@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230505184701.91613-1-gbatra@linux.vnet.ibm.com
Now that power calls iommu_device_register() and populates its groups
using iommu_ops->device_group it should not be calling
iommu_group_remove_device().
The core code owns the groups and all the other related iommu data, it
will clean it up automatically.
Remove the bus notifiers and explicit calls to
iommu_group_remove_device().
Fixes: a940904443 ("powerpc/iommu: Add iommu_ops to report capabilities and allow blocking domains")
Signed-off-by: Jason Gunthorpe <jgg@nvidia.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/0-v1-1421774b874b+167-ppc_device_group_jgg@nvidia.com
While mpc5200b.dtsi contains a device that this driver can bind to, the
only purpose of a bound device is to be used by the four exported functions
mpc52xx_lpbfifo_submit(), mpc52xx_lpbfifo_abort(), mpc52xx_lpbfifo_poll()
and mpc52xx_lpbfifo_start_xfer(). However there are no callers to this
function and so the driver is effectively superfluous and can be deleted.
Also drop some defines and a struct from <asm/mpc52xx.h> that are unused
now together with the declarations of the four mentioned functions.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230413061642.kqkor4wkt7lp2mhp@pengutronix.de
For ppc64, gcc with W=1 reports
arch/powerpc/platforms/cell/spu_base.c:330:17: error:
suggest braces around empty body in an 'if' statement [-Werror=empty-body]
330 | ;
| ^
arch/powerpc/platforms/cell/spu_base.c:333:17: error:
suggest braces around empty body in an 'if' statement [-Werror=empty-body]
333 | ;
| ^
These if-checks do not do anything so remove them.
Signed-off-by: Tom Rix <trix@redhat.com>
Fixes: 67207b9664 ("[PATCH] spufs: The SPU file system, base")
Reviewed-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230428221240.2679194-1-trix@redhat.com
When VSX is disabled, eg. microwatt_defconfig, the build fails with:
In function ‘enable_kernel_vsx’,
inlined from ‘vsx_begin’ at arch/powerpc/crypto/aes-gcm-p10-glue.c:68:2,
inlined from ‘p10_aes_gcm_crypt.constprop’ at arch/powerpc/crypto/aes-gcm-p10-glue.c:244:2:
...
arch/powerpc/include/asm/switch_to.h:86:9: note: in expansion of macro ‘BUILD_BUG’
86 | BUILD_BUG();
| ^~~~~~~~~
Fix it by making the p10-aes-gcm code depend on VSX.
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230515124731.122962-1-mpe%40ellerman.id.au
Since commit 85e031154c ("powerpc/bpf: Perform complete extra passes
to update addresses"), two additional passes are performed to avoid
space and CPU time wastage on powerpc. But these extra passes led to
WARN_ON_ONCE() hits in bpf_add_extable_entry() as extable entries are
populated again, during the extra pass, without resetting the index.
Fix it by resetting entry index before repopulating extable entries,
if and when there is an additional pass.
Fixes: 85e031154c ("powerpc/bpf: Perform complete extra passes to update addresses")
Cc: stable@vger.kernel.org # v6.3+
Signed-off-by: Hari Bathini <hbathini@linux.ibm.com>
Reviewed-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>
Link: https://msgid.link/20230425065829.18189-1-hbathini@linux.ibm.com
Pull compute express link fixes from Dan Williams:
- Fix a compilation issue with DEFINE_STATIC_SRCU() in the unit tests
- Fix leaking kernel memory to a root-only sysfs attribute
* tag 'cxl-fixes-6.4-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl:
cxl: Add missing return to cdat read error path
tools/testing/cxl: Use DEFINE_STATIC_SRCU()
Pull parisc architecture fixes from Helge Deller:
- Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
- Include reboot.h to avoid gcc-12 compiler warning
* tag 'parisc-for-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Fix encoding of swp_entry due to added SWP_EXCLUSIVE flag
parisc: kexec: include reboot.h
Pull ARM fixes from Russell King:
- fix unwinder for uleb128 case
- fix kernel-doc warnings for HP Jornada 7xx
- fix unbalanced stack on vfp success path
* tag 'for-linus' of git://git.armlinux.org.uk/~rmk/linux-arm:
ARM: 9297/1: vfp: avoid unbalanced stack on 'success' return path
ARM: 9296/1: HP Jornada 7XX: fix kernel-doc warnings
ARM: 9295/1: unwind:fix unwind abort for uleb128 case
Pull locking fix from Borislav Petkov:
- Make sure __down_read_common() is always inlined so that the callers'
names land in traceevents output and thus the blocked function can be
identified
* tag 'locking_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/rwsem: Add __always_inline annotation to __down_read_common() and inlined callers
Pull perf fixes from Borislav Petkov:
- Make sure the PEBS buffer is flushed before reprogramming the
hardware so that the correct record sizes are used
- Update the sample size for AMD BRS events
- Fix a confusion with using the same on-stack struct with different
events in the event processing path
* tag 'perf_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/ds: Flush PEBS DS when changing PEBS_DATA_CFG
perf/x86: Fix missing sample size update on AMD BRS
perf/core: Fix perf_sample_data not properly initialized for different swevents in perf_tp_event()
Pull scheduler fix from Borislav Petkov:
- Fix a couple of kernel-doc warnings
* tag 'sched_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: fix cid_lock kernel-doc warnings
Pull x86 fix from Borislav Petkov:
- Add the required PCI IDs so that the generic SMN accesses provided by
amd_nb.c work for drivers which switch to them. Add a PCI device ID
to k10temp's table so that latter is loaded on such systems too
* tag 'x86_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
hwmon: (k10temp) Add PCI ID for family 19, model 78h
x86/amd_nb: Add PCI ID for family 19h model 78h
Pull timer fix from Borislav Petkov:
- Prevent CPU state corruption when an active clockevent broadcast
device is replaced while the system is already in oneshot mode
* tag 'timers_urgent_for_v6.4_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
tick/broadcast: Make broadcast device replacement work correctly
Pull ext4 fixes from Ted Ts'o:
"Some ext4 bug fixes (mostly to address Syzbot reports)"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: bail out of ext4_xattr_ibody_get() fails for any reason
ext4: add bounds checking in get_max_inline_xattr_value_size()
ext4: add indication of ro vs r/w mounts in the mount message
ext4: fix deadlock when converting an inline directory in nojournal mode
ext4: improve error recovery code paths in __ext4_remount()
ext4: improve error handling from ext4_dirhash()
ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled
ext4: check iomap type only if ext4_iomap_begin() does not fail
ext4: avoid a potential slab-out-of-bounds in ext4_group_desc_csum
ext4: fix data races when using cached status extents
ext4: avoid deadlock in fs reclaim with page writeback
ext4: fix invalid free tracking in ext4_xattr_move_to_block()
ext4: remove a BUG_ON in ext4_mb_release_group_pa()
ext4: allow ext4_get_group_info() to fail
ext4: fix lockdep warning when enabling MMP
ext4: fix WARNING in mb_find_extent
Pull SCSI fix from James Bottomley:
"A single small fix for the UFS driver to fix a power management
failure"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Fix I/O hang that occurs when BKOPS fails in W-LUN suspend
In ext4_update_inline_data(), if ext4_xattr_ibody_get() fails for any
reason, it's best if we just fail as opposed to stumbling on,
especially if the failure is EFSCORRUPTED.
Cc: stable@kernel.org
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Whether the file system is mounted read-only or read/write is more
important than the quota mode, which we are already printing. Add the
ro vs r/w indication since this can be helpful in debugging problems
from the console log.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
If there are failures while changing the mount options in
__ext4_remount(), we need to restore the old mount options.
This commit fixes two problem. The first is there is a chance that we
will free the old quota file names before a potential failure leading
to a use-after-free. The second problem addressed in this commit is
if there is a failed read/write to read-only transition, if the quota
has already been suspended, we need to renable quota handling.
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-2-tytso@mit.edu
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
When a file system currently mounted read/only is remounted
read/write, if we clear the SB_RDONLY flag too early, before the quota
is initialized, and there is another process/thread constantly
attempting to create a directory, it's possible to trigger the
WARN_ON_ONCE(dquot_initialize_needed(inode));
in ext4_xattr_block_set(), with the following stack trace:
WARNING: CPU: 0 PID: 5338 at fs/ext4/xattr.c:2141 ext4_xattr_block_set+0x2ef2/0x3680
RIP: 0010:ext4_xattr_block_set+0x2ef2/0x3680 fs/ext4/xattr.c:2141
Call Trace:
ext4_xattr_set_handle+0xcd4/0x15c0 fs/ext4/xattr.c:2458
ext4_initxattrs+0xa3/0x110 fs/ext4/xattr_security.c:44
security_inode_init_security+0x2df/0x3f0 security/security.c:1147
__ext4_new_inode+0x347e/0x43d0 fs/ext4/ialloc.c:1324
ext4_mkdir+0x425/0xce0 fs/ext4/namei.c:2992
vfs_mkdir+0x29d/0x450 fs/namei.c:4038
do_mkdirat+0x264/0x520 fs/namei.c:4061
__do_sys_mkdirat fs/namei.c:4076 [inline]
__se_sys_mkdirat fs/namei.c:4074 [inline]
__x64_sys_mkdirat+0x89/0xa0 fs/namei.c:4074
Cc: stable@kernel.org
Link: https://lore.kernel.org/r/20230506142419.984260-1-tytso@mit.edu
Reported-by: syzbot+6385d7d3065524c5ca6d@syzkaller.appspotmail.com
Link: https://syzkaller.appspot.com/bug?id=6513f6cb5cd6b5fc9f37e3bb70d273b94be9c34c
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
