Tony Nguyen says:
====================
net/e1000e, igb, igc: Remove redundant runtime resume
Bjorn Helgaas says:
e1000e, igb, and igc all have code to runtime resume the device during
ethtool operations.
Since f32a213765 ("ethtool: runtime-resume netdev parent before ethtool
ioctl ops"), dev_ethtool() does this for us, so remove it from the
individual drivers.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/next-queue:
igc: Remove redundant runtime resume for ethtool ops
igb: Remove redundant runtime resume for ethtool_ops
e1000e: Remove redundant runtime resume for ethtool_ops
====================
Link: https://lore.kernel.org/r/20240408210849.3641172-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
bonding: remove RTNL from three sysfs files
First patch might fix a potential deadlock.
sysfs handlers should use rtnl_trylock() instead of rtnl_lock().
Following files can be read without acquiring RTNL :
- /sys/class/net/bonding_masters
- /sys/class/net/<name>/bonding/slaves
- /sys/class/net/<name>/bonding/queue_id
====================
Link: https://lore.kernel.org/r/20240408190437.2214473-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When constructing a heap, heapify operations are required on all
non-leaf nodes. Thus, determining the index of the first non-leaf node
is crucial. In a heap, the left child's index of node i is 2 * i + 1
and the right child's index is 2 * i + 2. Node CAKE_MAX_TINS *
CAKE_QUEUES / 2 has its left and right children at indexes
CAKE_MAX_TINS * CAKE_QUEUES + 1 and CAKE_MAX_TINS * CAKE_QUEUES + 2,
respectively, which are beyond the heap's range, indicating it as a
leaf node. Conversely, node CAKE_MAX_TINS * CAKE_QUEUES / 2 - 1 has a
left child at index CAKE_MAX_TINS * CAKE_QUEUES - 1, confirming its
non-leaf status. The loop should start from it since it's not a leaf
node.
By starting the loop from CAKE_MAX_TINS * CAKE_QUEUES / 2 - 1, we
minimize function calls and branch condition evaluations. This
adjustment theoretically reduces two function calls (one for
cake_heapify() and another for cake_heap_get_backlog()) and five branch
evaluations (one for iterating all non-leaf nodes, one within
cake_heapify()'s while loop, and three more within the while loop
with if conditions).
Signed-off-by: Kuan-Wei Chiu <visitorckw@gmail.com>
Acked-by: Toke Høiland-Jørgensen <toke@toke.dk>
Link: https://lore.kernel.org/r/20240408174716.751069-1-visitorckw@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Horatiu Vultur says:
====================
net: phy: micrel: lan8814: Enable PTP_PF_PEROUT
Add support for PTP_PF_PEROUT to lan8814. First patch just enables
the LTC at probe time, such that it is not required to enable
timestamping to have the LTC enabled. While the second patch actually
adds support for PTP_PF_PEROUT.
====================
Link: https://lore.kernel.org/r/20240408064432.3881636-1-horatiu.vultur@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Lan8814 has 24 GPIOs but only 2 GPIOs (GPIO 0 and GPIO 1) can be
configured to generate period signals. And there are 2 events (EVENT_A
and EVENT_B) but these events are hardcoded to the GPIO 0 and GPIO 1.
These events are used to generate period signals. It is possible to
configure the length, the start time and the period of the signal by
configuring the event.
These events are generated by comparing the target time with the PHC
time. In case the PHC time is changed to a value bigger than the target
time + reload time, then it would generate only 1 event and then it
would stop because target time + reload time is smaller than PHC time.
Therefore it is required to change also the target time every time when
the PHC is changed. The same will apply also when the PHC time is
changed to a smaller value.
This was tested using:
testptp -i 1 -L 1,2
testptp -i 1 -p 1000000000 -w 200000000
Acked-by: Richard Cochran <richardcochran@gmail.com>
Reviewed-by: Divya Koppera <divya.koppera@microchip.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The LTC for lan8814 was enabled only if timestamping was enabled,
otherwise it would be stopped. Meaning that LTC will not increase by
itself. This might break other features that don't required timestamping
like generating 1PPS. Therefore enable the LTC at probe time.
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: Horatiu Vultur <horatiu.vultur@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Eric Dumazet says:
====================
tcp: fix ISN selection in TIMEWAIT -> SYN_RECV
TCP can transform a TIMEWAIT socket into a SYN_RECV one from
a SYN packet, and the ISN of the SYNACK packet is normally
generated using TIMEWAIT tw_snd_nxt.
This SYN packet also bypasses normal checks against listen queue
being full or not.
Unfortunately this has been broken almost one decade ago.
This series fixes the issue, in two patches.
First patch refactors code to add tcp_tw_isn as a parameter
to ->route_req(), to make the second patch smaller.
Second patch fixes the issue, by no longer using TCP_SKB_CB(skb)
to store the tcp_tw_isn.
Following packetdrill test passes after this series:
// Set up a server listening socket.
0 socket(..., SOCK_STREAM, IPPROTO_TCP) = 3
+0 setsockopt(3, SOL_SOCKET, SO_REUSEADDR, [1], 4) = 0
+0 bind(3, ..., ...) = 0
+0 listen(3, 1) = 0
// Establish connection
+0 < S 0:0(0) win 32792 <mss 1460,nop,nop,sackOK>
+0 > S. 0:0(0) ack 1 <mss 1460,nop,nop,sackOK>
+.01 < . 1:1(0) ack 1 win 32792
+0 accept(3, ..., ...) = 4
// We close(), send a FIN, and get an ACK and FIN, in order to get into TIME_WAIT.
+.01 close(4) = 0
+0 > F. 1:1(0) ack 1
+.01 < F. 1:1(0) ack 2 win 32792
+0 > . 2:2(0) ack 2
// SYN hitting a TIME_WAIT -> should use an ISN based on TIMEWAIT tw_snd_nxt
+.01 < S 1000:1000(0) win 65535 <mss 1460,nop,nop,sackOK>
+0 > S. 65539:65539(0) ack 1001 <mss 1460,nop,nop,sackOK>
====================
Link: https://lore.kernel.org/r/20240407093322.3172088-1-edumazet@google.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
TCP can transform a TIMEWAIT socket into a SYN_RECV one from
a SYN packet, and the ISN of the SYNACK packet is normally
generated using TIMEWAIT tw_snd_nxt :
tcp_timewait_state_process()
...
u32 isn = tcptw->tw_snd_nxt + 65535 + 2;
if (isn == 0)
isn++;
TCP_SKB_CB(skb)->tcp_tw_isn = isn;
return TCP_TW_SYN;
This SYN packet also bypasses normal checks against listen queue
being full or not.
tcp_conn_request()
...
__u32 isn = TCP_SKB_CB(skb)->tcp_tw_isn;
...
/* TW buckets are converted to open requests without
* limitations, they conserve resources and peer is
* evidently real one.
*/
if ((syncookies == 2 || inet_csk_reqsk_queue_is_full(sk)) && !isn) {
want_cookie = tcp_syn_flood_action(sk, rsk_ops->slab_name);
if (!want_cookie)
goto drop;
}
This was using TCP_SKB_CB(skb)->tcp_tw_isn field in skb.
Unfortunately this field has been accidentally cleared
after the call to tcp_timewait_state_process() returning
TCP_TW_SYN.
Using a field in TCP_SKB_CB(skb) for a temporary state
is overkill.
Switch instead to a per-cpu variable.
As a bonus, we do not have to clear tcp_tw_isn in TCP receive
fast path.
It is temporarily set then cleared only in the TCP_TW_SYN dance.
Fixes: 4ad19de877 ("net: tcp6: fix double call of tcp_v6_fill_cb()")
Fixes: eeea10b83a ("tcp: add tcp_v4_fill_cb()/tcp_v4_restore_cb()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
tcp_v6_init_req() reads TCP_SKB_CB(skb)->tcp_tw_isn to find
out if the request socket is created by a SYN hitting a TIMEWAIT socket.
This has been buggy for a decade, lets directly pass the information
from tcp_conn_request().
This is a preparatory patch to make the following one easier to review.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Daniel Machon says:
====================
Add support for flower actions mirred and redirect
This series adds support for the two tc flower actions mirred and
redirect. Both actions are implemented by means of a port mask and a
mask mode. The mask mode controls how the mask is applied, and together
they are used by the switch to make a forwarding decision. Both actions
are configurable via the IS0 or IS2 VCAP's (ingress stage 0 and 2,
respectively).
Patch #1: adds support for tc flower mirred action.
Patch #2: adds support for tc flower redirect action.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
====================
Link: https://lore.kernel.org/r/20240405-mirror-redirect-actions-v2-0-875d4c1927c8@microchip.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for the flower redirect action. Two VCAP actions are encoded
in the rule - one for the port mask, and one for the port mask mode.
When the rule is hit, the port mask is used as the final destination
set, replacing all other port masks.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Add support for tc flower mirred action. Two VCAP actions are encoded in
the rule - one for the port mask, and one for the port mask mode. When
the rule is hit, the destination mask is OR'ed with the port mask.
Also add new VCAP function for supporting 72-bit wide actions, and a tc
helper for setting the port forwarding mask.
Signed-off-by: Daniel Machon <daniel.machon@microchip.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Diogo Ivo says:
====================
Support ICSSG-based Ethernet on AM65x SR1.0 devices
This series extends the current ICSSG-based Ethernet driver to support
AM65x Silicon Revision 1.0 devices.
Notable differences between the Silicon Revisions are that there is
no TX core in SR1.0 with this being handled by the firmware, requiring
extra DMA channels to manage communication with the firmware (with the
firmware being different as well) and in the packet classifier.
The motivation behind it is that a significant number of Siemens
devices containing SR1.0 silicon have been deployed in the field
and need to be supported and updated to newer kernel versions
without losing functionality.
This series is based on TI's 5.10 SDK [1].
The fifth version of this patch series can be found in [2].
Compared to the last version of the patch set there are only changes in
patch 05/10, where the fields of a struct are now explicitly declared as
__le32 so that we can properly interpret them.
Both of the problems mentioned in v4 have been addressed by disabling
those functionalities, meaning that this driver currently only supports
one TX queue and does not support a 100Mbit/s half-duplex connection.
The removal of these features has been commented in the appropriate
locations in the code.
[1]: https://git.ti.com/cgit/ti-linux-kernel/ti-linux-kernel/tree/?h=ti-linux-5.10.y
[2]: https://lore.kernel.org/netdev/20240326110709.26165-1-diogo.ivo@siemens.com/
====================
Link: https://lore.kernel.org/r/20240403104821.283832-1-diogo.ivo@siemens.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
In order to allow code sharing between Silicon Revisions 1.0 and 2.0
move all functions that can be shared into a common file. This commit
introduces no functional changes.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
As these addresses can be useful outside of checking if an address
is a multicast address (for example in device drivers) make them
accessible to users of etherdevice.h to avoid code duplication.
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Silicon Revision 1.0 of the AM65x came with a slightly different ICSSG
support: Only 2 PRUs per slice are available and instead 2 additional
DMA channels are used for management purposes. We have no restrictions
on specified PRUs, but the DMA channels need to be adjusted.
Co-developed-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
Signed-off-by: Diogo Ivo <diogo.ivo@siemens.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Roger Quadros <rogerq@kernel.org>
Reviewed-by: MD Danish Anwar <danishanwar@ti.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
8c5ad0dae9 ("igc: Add ethtool support") added ethtool_ops.begin() and
.complete(), which used pm_runtime_get_sync() to resume suspended devices
before any ethtool_ops callback and allow suspend after it completed.
Subsequently, f32a213765 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.
Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
749ab2cd12 ("igb: add basic runtime PM support") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.
Subsequently, f32a213765 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before any ethtool_ops callback even if the driver
didn't supply a .begin() callback.
Remove the .begin() and .complete() callbacks, which are now redundant
because dev_ethtool() already resumes the device.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Sunitha Mekala <sunithax.d.mekala@intel.com> (A Contingent worker at Intel)
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
e60b22c5b7 ("e1000e: fix accessing to suspended device") added
ethtool_ops.begin() and .complete(), which used pm_runtime_get_sync() to
resume suspended devices before any ethtool_ops callback and allow suspend
after it completed.
3ef672ab18 ("e1000e: ethtool unnecessarily takes device out of RPM
suspend") removed ethtool_ops.begin() and .complete() and instead did
pm_runtime_get_sync() only in the individual ethtool_ops callbacks that
access device registers.
Subsequently, f32a213765 ("ethtool: runtime-resume netdev parent before
ethtool ioctl ops") added pm_runtime_get_sync() in the dev_ethtool() path,
so the device is resumed before *any* ethtool_ops callback, as it was
before 3ef672ab18.
Remove most runtime resumes from ethtool_ops, which are now redundant
because the resume has already been done by dev_ethtool(). This is
essentially a revert of 3ef672ab18 ("e1000e: ethtool unnecessarily takes
device out of RPM suspend").
There are a couple subtleties:
- Prior to 3ef672ab18, the device was resumed only for the duration of
a single ethtool callback. 3ef672ab18 changed e1000_set_phys_id() so
the device was resumed for ETHTOOL_ID_ACTIVE and remained resumed until
a subsequent callback for ETHTOOL_ID_INACTIVE. Preserve that part of
3ef672ab18 so the device will not be runtime suspended while in the
ETHTOOL_ID_ACTIVE state.
- 3ef672ab18 added "if (!pm_runtime_suspended())" in before reading the
STATUS register in e1000_get_settings(). This was racy and is now
unnecessary because dev_ethtool() has resumed the device already, so
revert that.
Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Tested-by: Naama Meir <naamax.meir@linux.intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
A user reported an unknown chip version. According to the r8168 vendor
driver it's called RTL8168M, but handling is identical to RTL8168H.
So let's simply treat it as RTL8168H.
Tested-by: Евгений <octobergun@gmail.com>
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Parav Pandit says:
====================
devlink: Add port function attribute for IO EQs
Currently, PCI SFs and VFs use IO event queues to deliver netdev per
channel events. The number of netdev channels is a function of IO
event queues. In the second scenario of an RDMA device, the
completion vectors are also a function of IO event queues. Currently, an
administrator on the hypervisor has no means to provision the number
of IO event queues for the SF device or the VF device. Device/firmware
determines some arbitrary value for these IO event queues. Due to this,
the SF netdev channels are unpredictable, and consequently, the
performance is too.
This short series introduces a new port function attribute: max_io_eqs.
The goal is to provide administrators at the hypervisor level with the
ability to provision the maximum number of IO event queues for a
function. This gives the control to the administrator to provision
right number of IO event queues and have predictable performance.
Examples of when an administrator provisions (set) maximum number of
IO event queues when using switchdev mode:
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable max_io_eqs 10
$ devlink port function set pci/0000:06:00.0/1 max_io_eqs 20
$ devlink port show pci/0000:06:00.0/1
pci/0000:06:00.0/1: type eth netdev enp6s0pf0vf0 flavour pcivf pfnum 0 vfnum 0
function:
hw_addr 00:00:00:00:00:00 roce enable max_io_eqs 20
This sets the corresponding maximum IO event queues of the function
before it is enumerated. Thus, when the VF/SF driver reads the
capability from the device, it sees the value provisioned by the
hypervisor. The driver is then able to configure the number of channels
for the net device, as well as the number of completion vectors
for the RDMA device. The device/firmware also honors the provisioned
value, hence any VF/SF driver attempting to create IO EQs
beyond provisioned value results in an error.
With above setting now, the administrator is able to achieve the 2x
performance on SFs with 20 channels. In second example when SF was
provisioned for a container with 2 cpus, the administrator provisioned only
2 IO event queues, thereby saving device resources.
With the above settings now in place, the administrator achieved 2x
performance with the SF device with 20 channels. In the second example,
when the SF was provisioned for a container with 2 CPUs, the administrator
provisioned only 2 IO event queues, thereby saving device resources.
changelog:
v2->v3:
- limited to 80 chars per line in devlink
- fixed comments from Jakub in mlx5 driver to fix missing mutex unlock
on error path
v1->v2:
- limited comment to 80 chars per line in header file
- fixed set function variables for reverse christmas tree
- fixed comments from Kalesh
- fixed missing kfree in get call
- returning error code for get cmd failure
- fixed error msg copy paste error in set on cmd failure
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Implement get and set for the maximum IO event queues for SF and VF.
This enables administrator on the hypervisor to control the maximum
IO event queues which are typically used to derive the maximum and
default number of net device channels or rdma device completion vectors.
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Many devices send event notifications for the IO queues,
such as tx and rx queues, through event queues.
Enable a privileged owner, such as a hypervisor PF, to set the number
of IO event queues for the VF and SF during the provisioning stage.
example:
Get maximum IO event queues of the VF device::
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 10
Set maximum IO event queues of the VF device::
$ devlink port function set pci/0000:06:00.0/2 max_io_eqs 32
$ devlink port show pci/0000:06:00.0/2
pci/0000:06:00.0/2: type eth netdev enp6s0pf0vf1 flavour pcivf pfnum 0 vfnum 1
function:
hw_addr 00:00:00:00:00:00 ipsec_packet disabled max_io_eqs 32
Reviewed-by: Jiri Pirko <jiri@nvidia.com>
Reviewed-by: Shay Drory <shayd@nvidia.com>
Signed-off-by: Parav Pandit <parav@nvidia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Print these additional fields in skb_dump() to ease debugging.
- mac_len
- csum_start (in v2, at Willem suggestion)
- csum_offset (in v2, at Willem suggestion)
- priority
- mark
- alloc_cpu
- vlan_all
- encapsulation
- inner_protocol
- inner_mac_header
- inner_network_header
- inner_transport_header
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Andrew Lunn says:
====================
net: Clean up some EEE code
Previous patches have reworked the API between phylib and MAC drivers
with respect to EEE, pushing most of the work into phylib. These two
patches rework two drivers to make use of the new API, and fix their
EEE implementation, so that EEE is configured in the MAC based on what
is actually negotiated during autoneg.
Compile tested only.
====================
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>
The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into
lan743x_phy_link_status_change() which gets called by phylib when
there is a change in link status.
lan743x_ethtool_set_eee() now just programs the hardware with the LTI
timer value, and passed everything else to phylib, so it can correctly
setup the PHY.
lan743x_ethtool_get_eee() relies on phylib doing most of the work, the
MAC driver just adds the LTI timer value.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The enabling/disabling of EEE in the MAC should happen as a result of
auto negotiation. So move the enable/disable into
lan783xx_phy_link_status_change() which gets called by phylib when
there is a change in link status.
lan78xx_set_eee() now just programs the hardware with the LPI
timer value, and passed everything else to phylib, so it can correctly
setup the PHY.
lan743x_get_eee() relies on phylib doing most of the work, the
MAC driver just adds the LPI timer value.
Call phy_support_eee() to indicate the MAC does actually support EEE.
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Oleksij Rempel <o.rempel@pengutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
The reason codes are handled in two ways nowadays (quoting Mat Martineau):
1. Sending in the MPTCP option on RST packets when there is no subflow
context available (these use subflow_add_reset_reason() and directly call
a TCP-level send_reset function)
2. The "normal" way via subflow->reset_reason. This will propagate to both
the outgoing reset packet and to a local path manager process via netlink
in mptcp_event_sub_closed()
RFC 8684 defines the skb reset reason behaviour which is not required
even though in some places:
A host sends a TCP RST in order to close a subflow or reject
an attempt to open a subflow (MP_JOIN). In order to let the
receiving host know why a subflow is being closed or rejected,
the TCP RST packet MAY include the MP_TCPRST option (Figure 15).
The host MAY use this information to decide, for example, whether
it tries to re-establish the subflow immediately, later, or never.
Since the commit dc87efdb1a ("mptcp: add mptcp reset option support")
introduced this feature about three years ago, we can fully use it.
There remains some places where we could insert reason into skb as
we can see in this patch.
Many thanks to Mat and Paolo for help:)
Signed-off-by: Jason Xing <kernelxing@tencent.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add a "scope" parameter to ip_route_output() so that callers don't have
to override the tos parameter with the RTO_ONLINK flag if they want a
local scope.
This will allow converting flowi4_tos to dscp_t in the future, thus
allowing static analysers to flag invalid interactions between
"tos" (the DSCP bits) and ECN.
Only three users ask for local scope (bonding, arp and atm). The others
continue to use RT_SCOPE_UNIVERSE. While there, add a comment to warn
users about the limitations of ip_route_output().
Signed-off-by: Guillaume Nault <gnault@redhat.com>
Acked-by: Leon Romanovsky <leonro@nvidia.com> # infiniband
Signed-off-by: David S. Miller <davem@davemloft.net>
In case of stacked devices, to help propagate the down
link state from the parent/root device (to this leaf device),
handle NETDEV_DOWN event like it is done now for NETDEV_UP.
In the below example, ens5 is the host interface which is the
parent of the ipvlan interface eth0 in the container.
Host:
[root@gkn-podman-x64 ~]# ip link set ens5 down
[root@gkn-podman-x64 ~]# ip -d link show dev ens5
3: ens5: <BROADCAST,MULTICAST> mtu 9000 qdisc mq state DOWN
...
[root@gkn-podman-x64 ~]#
Container:
[root@testnode-ol8 /]# ip -d link show dev eth0
2: eth0@if3: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 9000 state UNKNOWN
...
ipvlan mode l2 bridge
...
[root@testnode-ol8 /]#
eth0's state continues to show up as UP even though ens5 is now DOWN.
For macvlan the handling of NETDEV_DOWN event was added in
commit 80fd2d6ca5 ("macvlan: Change status when lower device goes down").
Reported-by: Gia-Khanh Nguyen <gia-khanh.nguyen@oracle.com>
Signed-off-by: Venkat Venkatsubra <venkat.x.venkatsubra@oracle.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
In a future patch HAS_IOPORT=n will disable inb()/outb() and friends at
compile time. We thus need to add HAS_IOPORT as dependency for
those drivers requiring them. For the DEFXX driver the use of I/O
ports is optional and we only need to fence specific code paths. It also
turns out that with HAS_IOPORT handled explicitly HAMRADIO does not need
the !S390 dependency and successfully builds the bpqether driver.
Acked-by: Marc Kleine-Budde <mkl@pengutronix.de>
Acked-by: Jakub Kicinski <kuba@kernel.org>
Acked-by: Maciej W. Rozycki <macro@orcam.me.uk>
Co-developed-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@kernel.org>
Signed-off-by: Niklas Schnelle <schnelle@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Matthieu Baerts says:
====================
selftests: mptcp: cleanups and 'ip mptcp' support
Here are some patches from Geliang, doing different cleanups, and
supporting 'ip mptcp' in more MPTCP selftests.
Patch 1 checks that TC is available in selftests requiring it.
Patch 2 adds 'ms' units in TC commands, to avoid confusions.
Patches 3-9 are some prerequisites for patch 10: some export code from
mptcp_join.sh to mptcp_lib.sh, to be re-used in pm_netlink.sh,
mptcp_sockopt.sh and simult_flows.sh ; and others add helpers to
pm_netlink.sh to easily support both 'ip mptcp' and 'pm_nl_ctl' tools to
interact with the in-kernel MPTCP path-manager.
Patch 10 adds a '-i' parameter in mptcp_sockopt.sh, pm_netlink.sh, and
simult_flows.sh to use 'ip mptcp' tool instead of 'pm_nl_ctl'.
Patch 11 fixes some ShellCheck warnings in pm_netlink.sh, in order to
drop a ShellCheck's 'disable' instruction.
====================
Signed-off-by: Matthieu Baerts (NGI0) <matttbe@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
