clang static analyzer reports this problem
init.c:739:8: warning: Called function pointer
is null (null dereference)
ret = adapter->if_ops.check_fw_status( ...
^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
In mwifiex_dnld_fw, there is an earlier check for check_fw_status(),
The check was introduced for usb support at the same time this
check in _mwifiex_fw_dpc() was made
if (adapter->if_ops.dnld_fw) {
ret = adapter->if_ops.dnld_fw(adapter, &fw);
} else {
ret = mwifiex_dnld_fw(adapter, &fw);
}
And a dnld_fw function initialized as part the usb's
mwifiex_if_ops.
The other instances of mwifiex_if_ops for pci and sdio
both set check_fw_status.
So the first check is not needed and can be removed.
Fixes: 4daffe3543 ("mwifiex: add support for Marvell USB8797 chipset")
Signed-off-by: Tom Rix <trix@redhat.com>
Reviewed-by: Nathan Chancellor <natechancellor@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200906200548.18053-1-trix@redhat.com
Setting F2 block size to 128 bytes for BCM4329 allows to significantly
improve RX throughput on NVIDIA Tegra20. Before this change the throughput
was capped to 30 Mbit/s on Tegra, now throughput is at 40 Mbit/s, which is
a maximum throughput for the BCM4329 chip. The F2 block size is borrowed
from the downstream BCMDHD driver. The comment in the BCMDHD driver says
that 128B improves throughput and turns out that it works for the brcmfmac
as well.
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200830191439.10017-4-digetx@gmail.com
This patch fixes SDHCI CRC errors during of RX throughput testing on
BCM4329 chip if SDIO BUS is clocked above 25MHz. In particular the
checksum problem is observed on NVIDIA Tegra20 SoCs. The good watermark
value is borrowed from downstream BCMDHD driver and it's matching to the
value that is already used for the BCM4339 chip, hence let's re-use it
for BCM4329.
Reviewed-by: Arend van Spriel <arend.vanspriel@broadcom.com>
Signed-off-by: Dmitry Osipenko <digetx@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200830191439.10017-2-digetx@gmail.com
These variables only used in sdio.c, move them to .c file
can silence these warnings:
In file included from drivers/net/wireless/marvell/mwifiex//main.h:59:0,
from drivers/net/wireless/marvell/mwifiex//cfp.c:24:
drivers/net/wireless/marvell/mwifiex//sdio.h:705:41: warning: ‘mwifiex_sdio_sd8801’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8801 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:689:41: warning: ‘mwifiex_sdio_sd8987’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8987 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:674:41: warning: ‘mwifiex_sdio_sd8887’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8887 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:658:41: warning: ‘mwifiex_sdio_sd8997’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8997 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:642:41: warning: ‘mwifiex_sdio_sd8977’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8977 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:627:41: warning: ‘mwifiex_sdio_sd8897’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8897 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:612:41: warning: ‘mwifiex_sdio_sd8797’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8797 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:597:41: warning: ‘mwifiex_sdio_sd8787’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8787 = {
^~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//sdio.h:582:41: warning: ‘mwifiex_sdio_sd8786’ defined but not used [-Wunused-const-variable=]
static const struct mwifiex_sdio_device mwifiex_sdio_sd8786 = {
^~~~~~~~~~~~~~~~~~~
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200902141155.30144-1-yuehaibing@huawei.com
In file included from drivers/net/wireless/marvell/mwifiex//cmdevt.c:26:0:
drivers/net/wireless/marvell/mwifiex//wmm.h:41:17: warning: ‘tos_to_tid_inv’ defined but not used [-Wunused-const-variable=]
static const u8 tos_to_tid_inv[] = {
^~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex//wmm.h:34:18: warning: ‘mwifiex_1d_to_wmm_queue’ defined but not used [-Wunused-const-variable=]
static const u16 mwifiex_1d_to_wmm_queue[8] = { 1, 0, 0, 1, 2, 2, 3, 3 };
^~~~~~~~~~~~~~~~~~~~~~~
move the variables definition to .c file, and leave declarations
in the header file to fix these warnings.
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200902140846.29024-1-yuehaibing@huawei.com
Remove function return type const in rtw8821c_get_swing_index().
This is unused, and unnecessary to be const.
All warnings (new ones prefixed by >>):
>> drivers/net/wireless/realtek/rtw88/rtw8821c.c:71:8: warning: type
qualifiers ignored on function return type [-Wignored-qualifiers]
71 | static const u8 rtw8821c_get_swing_index(struct rtw_dev *rtwdev)
| ^~~~~
Fixes: f745eb9ca5 ("rtw88: 8821c: Add 8821CE to Kconfig and Makefile")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Tzu-En Huang <tehuang@realtek.com>
Signed-off-by: Yan-Hsuan Chuang <yhchuang@realtek.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200902053402.12839-1-yhchuang@realtek.com
A new warning in clang points out when macro expansion might result in a
GNU C statement expression. There is an instance of this in the mwifiex
driver:
drivers/net/wireless/marvell/mwifiex/cmdevt.c:217:34: warning: '}' and
')' tokens terminating statement expression appear in different macro
expansion contexts [-Wcompound-token-split-by-macro]
host_cmd->seq_num = cpu_to_le16(HostCmd_SET_SEQ_NO_BSS_INFO
^~~~~~~~~~~~~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex/fw.h:519:46: note: expanded from
macro 'HostCmd_SET_SEQ_NO_BSS_INFO'
(((type) & 0x000f) << 12); }
^
This does not appear to be a real issue. Removing the braces and
replacing them with parentheses will fix the warning and not change the
meaning of the code.
Fixes: 5e6e3a92b9 ("wireless: mwifiex: initial commit for Marvell mwifiex driver")
Link: https://github.com/ClangBuiltLinux/linux/issues/1146
Reported-by: Andy Lavr <andy.lavr@gmail.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200901070834.1015754-1-natechancellor@gmail.com
Fixes the following W=1 kernel build warning(s):
In file included from drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:16:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_spurwar_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:19036:6: warning: variable ‘tempval’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_tempsense_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:21983:28: warning: variable ‘RfctrlMiscReg6_save’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_rssi_compute_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:22986:6: warning: variable ‘phyRx0_l’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_runsamples_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:23101:6: warning: variable ‘lpf_bw_ctl_miscreg4’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:23100:50: warning: variable ‘lpf_bw_ctl_miscreg3’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_iqcal_gainparams_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:23406:6: warning: variable ‘idx’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_a2_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:24707:7: warning: variable ‘phy_a6’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c: In function ‘wlc_phy_a3_nphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_n.c:24999:7: warning: variable ‘phy_a11’ set but not used [-Wunused-but-set-variable]
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: zhong jiang <zhongjiang@huawei.com>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-29-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
In file included from drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:11:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_rx_iq_cal’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1366:29: warning: variable ‘RFOverride0_old’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_radio_2064_channel_tune_4313’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:21: warning: variable ‘qFvco’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:14: warning: variable ‘qFref’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:1667:6: warning: variable ‘qFxtal’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_idle_tssi_est’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:2856:6: warning: variable ‘idleTssi’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_tx_iqlo_soft_cal_full’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:53: warning: variable ‘locc4’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:46: warning: variable ‘locc3’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:39: warning: variable ‘locc2’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:3861:32: warning: variable ‘iqcc0’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_lcnphy_periodic_cal’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4196:6: warning: variable ‘rx_iqcomp_sz’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4195:33: warning: variable ‘rx_iqcomp’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4194:16: warning: variable ‘full_cal’ set but not used [-Wunused-but-set-variable]
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c: In function ‘wlc_phy_txpwr_srom_read_lcnphy’:
drivers/net/wireless/broadcom/brcm80211/brcmsmac/phy/phy_lcn.c:4919:7: warning: variable ‘opo’ set but not used [-Wunused-but-set-variable]
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-28-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
In file included from drivers/net/wireless/wl3501_cs.c:57:
drivers/net/wireless/wl3501_cs.c:143: warning: Function parameter or member 'reg_domain' not described in 'iw_valid_channel'
drivers/net/wireless/wl3501_cs.c:143: warning: Function parameter or member 'channel' not described in 'iw_valid_channel'
drivers/net/wireless/wl3501_cs.c:162: warning: Function parameter or member 'reg_domain' not described in 'iw_default_channel'
drivers/net/wireless/wl3501_cs.c:248: warning: Function parameter or member 'this' not described in 'wl3501_set_to_wla'
drivers/net/wireless/wl3501_cs.c:270: warning: Function parameter or member 'this' not described in 'wl3501_get_from_wla'
drivers/net/wireless/wl3501_cs.c:467: warning: Function parameter or member 'this' not described in 'wl3501_send_pkt'
drivers/net/wireless/wl3501_cs.c:467: warning: Function parameter or member 'data' not described in 'wl3501_send_pkt'
drivers/net/wireless/wl3501_cs.c:467: warning: Function parameter or member 'len' not described in 'wl3501_send_pkt'
drivers/net/wireless/wl3501_cs.c:729: warning: Function parameter or member 'this' not described in 'wl3501_block_interrupt'
drivers/net/wireless/wl3501_cs.c:746: warning: Function parameter or member 'this' not described in 'wl3501_unblock_interrupt'
drivers/net/wireless/wl3501_cs.c:1124: warning: Function parameter or member 'irq' not described in 'wl3501_interrupt'
drivers/net/wireless/wl3501_cs.c:1124: warning: Function parameter or member 'dev_id' not described in 'wl3501_interrupt'
drivers/net/wireless/wl3501_cs.c:1257: warning: Function parameter or member 'dev' not described in 'wl3501_reset'
drivers/net/wireless/wl3501_cs.c:1420: warning: Function parameter or member 'link' not described in 'wl3501_detach'
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Fox Chen <mhchen@golf.ccl.itri.org.tw>
Cc: de Melo <acme@conectiva.com.br>
Cc: Gustavo Niemeyer <niemeyer@conectiva.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-21-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
In file included from drivers/net/wireless/intersil/hostap/hostap_cs.c:196:
drivers/net/wireless/intersil/hostap/hostap_hw.c: In function ‘prism2_tx_80211’:
drivers/net/wireless/intersil/hostap/hostap_hw.c:1806:18: warning: variable ‘fc’ set but not used [-Wunused-but-set-variable]
1806 | u16 tx_control, fc;
| ^~
In file included from drivers/net/wireless/intersil/hostap/hostap_plx.c:264:
drivers/net/wireless/intersil/hostap/hostap_hw.c: In function ‘prism2_tx_80211’:
drivers/net/wireless/intersil/hostap/hostap_hw.c:1806:18: warning: variable ‘fc’ set but not used [-Wunused-but-set-variable]
1806 | u16 tx_control, fc;
| ^~
In file included from drivers/net/wireless/intersil/hostap/hostap_pci.c:221:
drivers/net/wireless/intersil/hostap/hostap_hw.c: In function ‘prism2_tx_80211’:
drivers/net/wireless/intersil/hostap/hostap_hw.c:1806:18: warning: variable ‘fc’ set but not used [-Wunused-but-set-variable]
1806 | u16 tx_control, fc;
| ^~
Cc: Jouni Malinen <j@w1.fi>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Cong Wang <xiyou.wangcong@gmail.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-20-lee.jones@linaro.org
- File headers do not make for good kernel-doc candidates
- Kernel-doc header lines should start with " *"
- Fix doc-rot issue
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/rsi/rsi_91x_sdio.c:25: warning: cannot understand function prototype: 'u16 dev_oper_mode = DEV_OPMODE_STA_BT_DUAL; '
drivers/net/wireless/rsi/rsi_91x_sdio.c:802: warning: bad line: from the device.
drivers/net/wireless/rsi/rsi_91x_sdio.c:842: warning: Function parameter or member 'pfunction' not described in 'rsi_init_sdio_interface'
drivers/net/wireless/rsi/rsi_91x_sdio.c:842: warning: Excess function parameter 'pkt' description in 'rsi_init_sdio_interface'
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Siva Rebbagondla <siva8118@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-17-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c:389: warning: Function parameter or member 'name' not described in 'brcmf_fws_mac_descriptor'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c:389: warning: Function parameter or member 'requested_packet' not described in 'brcmf_fws_mac_descriptor'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c:389: warning: Function parameter or member 'suppr_transit_count' not described in 'brcmf_fws_mac_descriptor'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c:389: warning: Function parameter or member 'send_tim_signal' not described in 'brcmf_fws_mac_descriptor'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c:389: warning: Function parameter or member 'traffic_pending_bmp' not described in 'brcmf_fws_mac_descriptor'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/fwsignal.c:389: warning: Function parameter or member 'traffic_lastreported_bmp' not described in 'brcmf_fws_mac_descriptor'
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-14-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:433: warning: Function parameter or member 'hw' not described in 'zd_mac_tx_status'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:433: warning: Function parameter or member 'skb' not described in 'zd_mac_tx_status'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:433: warning: Function parameter or member 'tx_status' not described in 'zd_mac_tx_status'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:433: warning: Excess function parameter 'flags' description in 'zd_mac_tx_status'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:487: warning: Function parameter or member 'urb' not described in 'zd_mac_tx_failed'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:487: warning: Excess function parameter 'dev' description in 'zd_mac_tx_failed'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:927: warning: Function parameter or member 'hw' not described in 'zd_op_tx'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:927: warning: Excess function parameter 'dev' description in 'zd_op_tx'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:963: warning: Function parameter or member 'hw' not described in 'filter_ack'
drivers/net/wireless/zydas/zd1211rw/zd_mac.c:963: warning: Excess function parameter 'dev' description in 'filter_ack'
Cc: Daniel Drake <dsd@gentoo.org>
Cc: Ulrich Kunitz <kune@deine-taler.de>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Michael Wu <flamingice@sourmilk.net>
Cc: "Luis R. Rodriguez" <mcgrof@winlab.rutgers.edu>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-11-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intersil/orinoco/orinoco_usb.c:434: warning: Function parameter or member 'upriv' not described in 'ezusb_req_queue_run'
drivers/net/wireless/intersil/orinoco/orinoco_usb.c:716: warning: Function parameter or member 'req' not described in 'ezusb_fill_req'
drivers/net/wireless/intersil/orinoco/orinoco_usb.c:716: warning: Function parameter or member 'length' not described in 'ezusb_fill_req'
drivers/net/wireless/intersil/orinoco/orinoco_usb.c:716: warning: Function parameter or member 'rid' not described in 'ezusb_fill_req'
drivers/net/wireless/intersil/orinoco/orinoco_usb.c:716: warning: Function parameter or member 'data' not described in 'ezusb_fill_req'
drivers/net/wireless/intersil/orinoco/orinoco_usb.c:716: warning: Function parameter or member 'frame_type' not described in 'ezusb_fill_req'
drivers/net/wireless/intersil/orinoco/orinoco_usb.c:716: warning: Function parameter or member 'reply_count' not described in 'ezusb_fill_req'
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Greg Kroah-Hartman <greg@kroah.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-8-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlegacy/3945.c:104: warning: Function parameter or member 'il' not described in 'il3945_disable_events'
drivers/net/wireless/intel/iwlegacy/3945.c:273: warning: Function parameter or member 'il' not described in 'il3945_tx_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/3945.c:273: warning: Function parameter or member 'txq_id' not described in 'il3945_tx_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/3945.c:273: warning: Function parameter or member 'idx' not described in 'il3945_tx_queue_reclaim'
drivers/net/wireless/intel/iwlegacy/3945.c:299: warning: Function parameter or member 'il' not described in 'il3945_hdl_tx'
drivers/net/wireless/intel/iwlegacy/3945.c:299: warning: Function parameter or member 'rxb' not described in 'il3945_hdl_tx'
drivers/net/wireless/intel/iwlegacy/3945.c:637: warning: Function parameter or member 'il' not described in 'il3945_hw_txq_free_tfd'
drivers/net/wireless/intel/iwlegacy/3945.c:637: warning: Function parameter or member 'txq' not described in 'il3945_hw_txq_free_tfd'
drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'il' not described in 'il3945_hw_build_tx_cmd_rate'
drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'cmd' not described in 'il3945_hw_build_tx_cmd_rate'
drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'info' not described in 'il3945_hw_build_tx_cmd_rate'
drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'hdr' not described in 'il3945_hw_build_tx_cmd_rate'
drivers/net/wireless/intel/iwlegacy/3945.c:686: warning: Function parameter or member 'sta_id' not described in 'il3945_hw_build_tx_cmd_rate'
drivers/net/wireless/intel/iwlegacy/3945.c:838: warning: Function parameter or member 'il' not described in 'il3945_txq_ctx_reset'
drivers/net/wireless/intel/iwlegacy/3945.c:1003: warning: Function parameter or member 'il' not described in 'il3945_hw_txq_ctx_free'
drivers/net/wireless/intel/iwlegacy/3945.c:1044: warning: Function parameter or member 'new_reading' not described in 'il3945_hw_reg_adjust_power_by_temp'
drivers/net/wireless/intel/iwlegacy/3945.c:1044: warning: Function parameter or member 'old_reading' not described in 'il3945_hw_reg_adjust_power_by_temp'
drivers/net/wireless/intel/iwlegacy/3945.c:1053: warning: Function parameter or member 'temperature' not described in 'il3945_hw_reg_temp_out_of_range'
drivers/net/wireless/intel/iwlegacy/3945.c:1069: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_txpower_get_temperature'
drivers/net/wireless/intel/iwlegacy/3945.c:1107: warning: Function parameter or member 'il' not described in 'il3945_is_temp_calib_needed'
drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_set_scan_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'scan_tbl_idx' not described in 'il3945_hw_reg_set_scan_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'rate_idx' not described in 'il3945_hw_reg_set_scan_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'clip_pwrs' not described in 'il3945_hw_reg_set_scan_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'ch_info' not described in 'il3945_hw_reg_set_scan_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1328: warning: Function parameter or member 'band_idx' not described in 'il3945_hw_reg_set_scan_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1383: warning: Function parameter or member 'il' not described in 'il3945_send_tx_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1460: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_set_new_power'
drivers/net/wireless/intel/iwlegacy/3945.c:1522: warning: Function parameter or member 'ch_info' not described in 'il3945_hw_reg_get_ch_txpower_limit'
drivers/net/wireless/intel/iwlegacy/3945.c:1552: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_comp_txpower_temp'
drivers/net/wireless/intel/iwlegacy/3945.c:1712: warning: Function parameter or member 'il' not described in 'il3945_commit_rxon'
drivers/net/wireless/intel/iwlegacy/3945.c:1845: warning: Function parameter or member 'il' not described in 'il3945_reg_txpower_periodic'
drivers/net/wireless/intel/iwlegacy/3945.c:1889: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_get_ch_grp_idx'
drivers/net/wireless/intel/iwlegacy/3945.c:1889: warning: Function parameter or member 'ch_info' not described in 'il3945_hw_reg_get_ch_grp_idx'
drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'il' not described in 'il3945_hw_reg_get_matched_power_idx'
drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'requested_power' not described in 'il3945_hw_reg_get_matched_power_idx'
drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'setting_idx' not described in 'il3945_hw_reg_get_matched_power_idx'
drivers/net/wireless/intel/iwlegacy/3945.c:1924: warning: Function parameter or member 'new_idx' not described in 'il3945_hw_reg_get_matched_power_idx'
drivers/net/wireless/intel/iwlegacy/3945.c:2055: warning: Function parameter or member 'il' not described in 'il3945_txpower_set_from_eeprom'
drivers/net/wireless/intel/iwlegacy/3945.c:2313: warning: Function parameter or member 'il' not described in 'il3945_init_hw_rate_table'
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-6-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlegacy/3945-rs.c:136: warning: Function parameter or member 'rs_sta' not described in 'il3945_rate_scale_flush_wins'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:243: warning: Function parameter or member 'rs_sta' not described in 'il3945_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:243: warning: Function parameter or member 'win' not described in 'il3945_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:243: warning: Function parameter or member 'success' not described in 'il3945_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:243: warning: Function parameter or member 'retries' not described in 'il3945_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:243: warning: Function parameter or member 'idx' not described in 'il3945_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:429: warning: Function parameter or member 'il_rate' not described in 'il3945_rs_tx_status'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:429: warning: Function parameter or member 'sband' not described in 'il3945_rs_tx_status'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:429: warning: Function parameter or member 'sta' not described in 'il3945_rs_tx_status'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:429: warning: Function parameter or member 'il_sta' not described in 'il3945_rs_tx_status'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:429: warning: Function parameter or member 'skb' not described in 'il3945_rs_tx_status'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:606: warning: Function parameter or member 'il_r' not described in 'il3945_rs_get_rate'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:606: warning: Function parameter or member 'sta' not described in 'il3945_rs_get_rate'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:606: warning: Function parameter or member 'il_sta' not described in 'il3945_rs_get_rate'
drivers/net/wireless/intel/iwlegacy/3945-rs.c:606: warning: Function parameter or member 'txrc' not described in 'il3945_rs_get_rate'
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-5-lee.jones@linaro.org
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlegacy/3945-mac.c:821: warning: Function parameter or member 'il' not described in 'il3945_setup_handlers'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:915: warning: Function parameter or member 'il' not described in 'il3945_dma_addr2rbd_ptr'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:915: warning: Function parameter or member 'dma_addr' not described in 'il3945_dma_addr2rbd_ptr'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:932: warning: Function parameter or member 'il' not described in 'il3945_rx_queue_restock'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:979: warning: Function parameter or member 'il' not described in 'il3945_rx_allocate'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:979: warning: Function parameter or member 'priority' not described in 'il3945_rx_allocate'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1179: warning: Function parameter or member 'il' not described in 'il3945_rx_handle'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1663: warning: Function parameter or member 'il' not described in 'il3945_verify_inst_full'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1663: warning: Function parameter or member 'image' not described in 'il3945_verify_inst_full'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1663: warning: Function parameter or member 'len' not described in 'il3945_verify_inst_full'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1703: warning: Function parameter or member 'il' not described in 'il3945_verify_inst_sparse'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1703: warning: Function parameter or member 'image' not described in 'il3945_verify_inst_sparse'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1703: warning: Function parameter or member 'len' not described in 'il3945_verify_inst_sparse'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1739: warning: Function parameter or member 'il' not described in 'il3945_verify_ucode'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:1821: warning: Function parameter or member 'il' not described in 'il3945_read_ucode'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:2061: warning: Function parameter or member 'il' not described in 'il3945_set_ucode_ptrs'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:2093: warning: Function parameter or member 'il' not described in 'il3945_init_alive_start'
drivers/net/wireless/intel/iwlegacy/3945-mac.c:2135: warning: Function parameter or member 'il' not described in 'il3945_alive_start'
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-4-lee.jones@linaro.org
Saves on 10's of complains about 'defined but not used' variables.
Fixes the following W=1 kernel build warning(s):
In file included from drivers/net/wireless/marvell/mwifiex/main.h:57,
from drivers/net/wireless/marvell/mwifiex/main.c:22:
drivers/net/wireless/marvell/mwifiex/pcie.h:310:41: warning: ‘mwifiex_pcie8997’ defined but not used [-Wunused-const-variable=]
310 | static const struct mwifiex_pcie_device mwifiex_pcie8997 = {
| ^~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex/pcie.h:300:41: warning: ‘mwifiex_pcie8897’ defined but not used [-Wunused-const-variable=]
300 | static const struct mwifiex_pcie_device mwifiex_pcie8897 = {
| ^~~~~~~~~~~~~~~~
drivers/net/wireless/marvell/mwifiex/pcie.h:292:41: warning: ‘mwifiex_pcie8766’ defined but not used [-Wunused-const-variable=]
292 | static const struct mwifiex_pcie_device mwifiex_pcie8766 = {
| ^~~~~~~~~~~~~~~~
NB: Repeats 10's of times - snipped for brevity.
Cc: Amitkumar Karwar <amitkarwar@gmail.com>
Cc: Ganapathi Bhat <ganapathi.bhat@nxp.com>
Cc: Xinming Hu <huxinming820@gmail.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200826093401.1458456-2-lee.jones@linaro.org
In p54p_tx(), skb->data is mapped to streaming DMA on line 337:
mapping = pci_map_single(..., skb->data, ...);
Then skb->data is accessed on line 349:
desc->device_addr = ((struct p54_hdr *)skb->data)->req_id;
This access may cause data inconsistency between CPU cache and hardware.
To fix this problem, ((struct p54_hdr *)skb->data)->req_id is stored in
a local variable before DMA mapping, and then the driver accesses this
local variable instead of skb->data.
Cc: <stable@vger.kernel.org>
Signed-off-by: Jia-Ju Bai <baijiaju@tsinghua.edu.cn>
Acked-by: Christian Lamparter <chunkeey@gmail.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200802132949.26788-1-baijiaju@tsinghua.edu.cn
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlegacy/4965-rs.c:156: warning: cannot understand function prototype: 's32 expected_tpt_legacy[RATE_COUNT] = '
drivers/net/wireless/intel/iwlegacy/4965-rs.c:406: warning: Function parameter or member 'tbl' not described in 'il4965_rs_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:406: warning: Function parameter or member 'scale_idx' not described in 'il4965_rs_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:406: warning: Function parameter or member 'attempts' not described in 'il4965_rs_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:406: warning: Function parameter or member 'successes' not described in 'il4965_rs_collect_tx_data'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:629: warning: Function parameter or member 'il' not described in 'il4965_rs_use_green'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:629: warning: Function parameter or member 'sta' not described in 'il4965_rs_use_green'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:645: warning: Function parameter or member 'lq_sta' not described in 'il4965_rs_get_supported_rates'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:645: warning: Function parameter or member 'hdr' not described in 'il4965_rs_get_supported_rates'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:645: warning: Function parameter or member 'rate_type' not described in 'il4965_rs_get_supported_rates'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:2130: warning: duplicate section name 'NOTE'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:2134: warning: Function parameter or member 'il' not described in 'il4965_rs_initialize_lq'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:2134: warning: Function parameter or member 'conf' not described in 'il4965_rs_initialize_lq'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:2134: warning: Function parameter or member 'sta' not described in 'il4965_rs_initialize_lq'
drivers/net/wireless/intel/iwlegacy/4965-rs.c:2134: warning: Function parameter or member 'lq_sta' not described in 'il4965_rs_initialize_lq'
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821071644.109970-23-lee.jones@linaro.org
The function headers are either very weakly documented or not at all.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:94: warning: Function parameter or member 'reg50' not described in 'brcmf_btcoex_info'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:94: warning: Function parameter or member 'saved_regs_part2' not described in 'brcmf_btcoex_info'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:233: warning: Function parameter or member 'btci' not described in 'btcmf_btcoex_save_part1'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:253: warning: Function parameter or member 'btci' not described in 'brcmf_btcoex_restore_part1'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:273: warning: Function parameter or member 't' not described in 'brcmf_btcoex_timerfunc'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:453: warning: Function parameter or member 'vif' not described in 'brcmf_btcoex_set_mode'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:453: warning: Function parameter or member 'duration' not described in 'brcmf_btcoex_set_mode'
drivers/net/wireless/broadcom/brcm80211/brcmfmac/btcoex.c:453: warning: Excess function parameter 'cfg' description in 'brcmf_btcoex_set_mode'
Cc: Arend van Spriel <arend.vanspriel@broadcom.com>
Cc: Franky Lin <franky.lin@broadcom.com>
Cc: Hante Meuleman <hante.meuleman@broadcom.com>
Cc: Chi-Hsien Lin <chi-hsien.lin@cypress.com>
Cc: Wright Feng <wright.feng@cypress.com>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: linux-wireless@vger.kernel.org
Cc: brcm80211-dev-list.pdl@broadcom.com
Cc: brcm80211-dev-list@cypress.com
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821071644.109970-17-lee.jones@linaro.org
These are clearly not suitable for kernel-doc.
Fixes the following W=1 kernel build warning(s):
drivers/net/wireless/intel/iwlegacy/4965-mac.c:234: warning: Function parameter or member 'il' not described in 'il4965_dma_addr2rbd_ptr'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:234: warning: Function parameter or member 'dma_addr' not described in 'il4965_dma_addr2rbd_ptr'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:251: warning: Function parameter or member 'il' not described in 'il4965_rx_queue_restock'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:301: warning: Function parameter or member 'il' not described in 'il4965_rx_allocate'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:301: warning: Function parameter or member 'priority' not described in 'il4965_rx_allocate'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:1138: warning: Function parameter or member 'il' not described in 'il4965_set_rxon_chain'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:1943: warning: Function parameter or member 'il' not described in 'il4965_hw_txq_ctx_free'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:1971: warning: Function parameter or member 'il' not described in 'il4965_txq_ctx_alloc'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2068: warning: Function parameter or member 'il' not described in 'il4965_txq_ctx_stop'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2109: warning: Function parameter or member 'il' not described in 'il4965_tx_queue_stop_scheduler'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2109: warning: Function parameter or member 'txq_id' not described in 'il4965_tx_queue_stop_scheduler'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2122: warning: Function parameter or member 'il' not described in 'il4965_tx_queue_set_q2ratid'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2122: warning: Function parameter or member 'ra_tid' not described in 'il4965_tx_queue_set_q2ratid'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2122: warning: Function parameter or member 'txq_id' not described in 'il4965_tx_queue_set_q2ratid'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2153: warning: Function parameter or member 'il' not described in 'il4965_txq_agg_enable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2153: warning: Function parameter or member 'txq_id' not described in 'il4965_txq_agg_enable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2153: warning: Function parameter or member 'tx_fifo' not described in 'il4965_txq_agg_enable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2153: warning: Function parameter or member 'sta_id' not described in 'il4965_txq_agg_enable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2153: warning: Function parameter or member 'tid' not described in 'il4965_txq_agg_enable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2153: warning: Function parameter or member 'ssn_idx' not described in 'il4965_txq_agg_enable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2285: warning: Function parameter or member 'il' not described in 'il4965_txq_agg_disable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2285: warning: Function parameter or member 'txq_id' not described in 'il4965_txq_agg_disable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2285: warning: Function parameter or member 'ssn_idx' not described in 'il4965_txq_agg_disable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2285: warning: Function parameter or member 'tx_fifo' not described in 'il4965_txq_agg_disable'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2500: warning: Function parameter or member 'il' not described in 'il4965_tx_status_reply_compressed_ba'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2500: warning: Function parameter or member 'agg' not described in 'il4965_tx_status_reply_compressed_ba'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2500: warning: Function parameter or member 'ba_resp' not described in 'il4965_tx_status_reply_compressed_ba'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2651: warning: Function parameter or member 'il' not described in 'il4965_tx_status_reply_tx'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2651: warning: Function parameter or member 'agg' not described in 'il4965_tx_status_reply_tx'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2651: warning: Function parameter or member 'tx_resp' not described in 'il4965_tx_status_reply_tx'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2651: warning: Function parameter or member 'txq_id' not described in 'il4965_tx_status_reply_tx'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2651: warning: Function parameter or member 'start_idx' not described in 'il4965_tx_status_reply_tx'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2761: warning: Function parameter or member 'il' not described in 'il4965_hdl_tx'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2761: warning: Function parameter or member 'rxb' not described in 'il4965_hdl_tx'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2882: warning: Function parameter or member 'il' not described in 'il4965_hwrate_to_tx_control'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2882: warning: Function parameter or member 'rate_n_flags' not described in 'il4965_hwrate_to_tx_control'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2882: warning: Function parameter or member 'info' not described in 'il4965_hwrate_to_tx_control'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2908: warning: Function parameter or member 'il' not described in 'il4965_hdl_compressed_ba'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:2908: warning: Function parameter or member 'rxb' not described in 'il4965_hdl_compressed_ba'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:3514: warning: Function parameter or member 'il' not described in 'il4965_alloc_bcast_station'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:3554: warning: Function parameter or member 'il' not described in 'il4965_update_bcast_station'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:3587: warning: Function parameter or member 'il' not described in 'il4965_sta_tx_modify_enable_tid'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:3587: warning: Function parameter or member 'sta_id' not described in 'il4965_sta_tx_modify_enable_tid'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:3587: warning: Function parameter or member 'tid' not described in 'il4965_sta_tx_modify_enable_tid'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:3916: warning: Function parameter or member 'il' not described in 'il4965_hw_txq_free_tfd'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:3916: warning: Function parameter or member 'txq' not described in 'il4965_hw_txq_free_tfd'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:4059: warning: Function parameter or member 't' not described in 'il4965_bg_stats_periodic'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:4169: warning: Function parameter or member 'il' not described in 'il4965_setup_handlers'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:4211: warning: Function parameter or member 'il' not described in 'il4965_rx_handle'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:4767: warning: Function parameter or member 'ucode_raw' not described in 'il4965_ucode_callback'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:4767: warning: Function parameter or member 'context' not described in 'il4965_ucode_callback'
drivers/net/wireless/intel/iwlegacy/4965-mac.c:5269: warning: Function parameter or member 'il' not described in 'il4965_alive_start'
Cc: Stanislaw Gruszka <stf_xl@wp.pl>
Cc: Kalle Valo <kvalo@codeaurora.org>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Jakub Kicinski <kuba@kernel.org>
Cc: Linux Wireless <ilw@linux.intel.com>
Cc: linux-wireless@vger.kernel.org
Cc: netdev@vger.kernel.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>
Link: https://lore.kernel.org/r/20200821071644.109970-16-lee.jones@linaro.org
