- Speed up clk_core_lookup() by using a hashtable
* clk-microchip:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
* clk-lookup:
clk: Use hashtable for global clk lookups
clk: Sort include statements
* clk-st:
dt-bindings: stm32: cosmetic fixes for STM32MP25 clock and reset bindings
clk: stm32: introduce clocks for STM32MP21 platform
dt-bindings: stm32: add STM32MP21 clocks and reset bindings
Pull Rockchip clk driver updates from Heiko Stuebner:
Export the dsi-24MHz clock on the RK3368, which seems to get some
attention to enable DSI support there.
* tag 'v6.18-rockchip-clk1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
clk: rockchip: rk3368: use clock ids for SCLK_MIPIDSI_24M
dt-bindings: clock: rk3368: Add SCLK_MIPIDSI_24M
The AST2700 reset driver is registered as an auxiliary device
due to reset and clock controller share the same register region.
Signed-off-by: Ryan Chen <ryan_chen@aspeedtech.com>
Reviewed-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
struct tegra_bpmp::clocks is a pointer to a dynamically allocated array
of pointers to 'struct tegra_bpmp_clk'.
But the size of the allocated area is calculated like it is an array
containing actual 'struct tegra_bpmp_clk' objects - it's not true, there
are just pointers.
Found by Linux Verification Center (linuxtesting.org) with Svace static
analysis tool.
Fixes: 2db12b15c6 ("clk: tegra: Register clocks from root to leaf")
Signed-off-by: Fedor Pchelkin <pchelkin@ispras.ru>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Change the 'ret' variable in ep93xx_uart_clock_init() from unsigned int to
int, as it needs to store either negative error codes or zero.
Storing the negative error codes in unsigned type, doesn't cause an issue
at runtime but can be confusing. Additionally, assigning negative error
codes to unsigned type may trigger a GCC warning when the -Wsign-conversion
flag is enabled.
No effect on runtime.
Signed-off-by: Qianfeng Rong <rongqianfeng@vivo.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clock controller of Loongson-2K0300 consists of three PLLs, requires
an 120MHz external reference clock to function, and generates clocks in
various frequencies for SoC peripherals.
Clock definitions for previous SoC generations could be reused for most
clock hardwares. There're two gates marked as critical, clk_node_gate
and clk_boot_gate, which supply the CPU cores and the system
configuration bus. Disabling them leads to a SoC hang.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Loongson-2K0300 requires a reference clock with a frequency different
from previous SoCs (120MHz v.s. 100MHz), thus hardcoding the firmware
name of the reference clock as ref_100m isn't a good idea.
This patch retrives the clock name of the reference clock dynamically
during probe, avoiding the hardcoded pdata structure and preparing for
support of future SoCs.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
LS2K0300 and LS2K0500 ship divider clocks which allows zero divisors,
in which case the divider acts the same as one is specified.
Let's pass CLK_DIVIDER_ALLOW_ZERO when registering divider clocks to
prepare for future introduction of these clocks.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
LS2K0300 and LS2K1500 ship scale clocks with an alternative mode.
There's one mode bit in clock configuration register indicating the
operation mode.
When mode bit is unset, the scale clock acts the same as previous
generation of scale clocks. When it's set, a different equation for
calculating result frequency, Fout = Fin / (scale + 1), is used.
This patch adds frequency calculation support for the scale clock
variant. A helper macro, CLK_SCALE_MODE, is added to simplify
definitions.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Some gate clocks need to be supplied with flags, e.g., it may be
required to specify CLK_IS_CRTICAL for CPU clocks.
Add a field to loongson2_clk_board_info for representing clock flags,
and specify it when registering gate clocks. A new helper macro,
CLK_GATE_FLAGS, is added to simplify definitions.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Document the clock controller shipped in Loongson-2K0300 SoC, which
generates various clock signals for SoC peripherals. Differing from
previous generations of SoCs, LS2K0300 requires a 120MHz external clock
input.
Signed-off-by: Yao Zi <ziyao@disroot.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Yanteng Si <siyanteng@cqsoftware.com.cn>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The output clock register offset used in clk_wzrd_register_output_clocks
was incorrectly referencing 0x3C instead of 0x38, which caused
misconfiguration of output dividers on Versal platforms.
Correcting the off-by-one error ensures proper configuration of output
clocks.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Optimise the clock wizard divisor calculation by eliminating the innermost
loop over output divider o. Earlier there was an error that is returned
if the WZRD_MIN_ERR is not achieved error is returned now it computes
the best possible frequency.
Signed-off-by: Shubhrajyoti Datta <shubhrajyoti.datta@amd.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The power domain driver shares the APMU clock controller's registers.
Instantiate the power domain driver through the APMU clock driver using
the auxiliary bus.
Also create a separate Kconfig entry for the PXA1908 clock driver to
allow (de)selecting the driver at will and selecting
CONFIG_AUXILIARY_BUS.
Signed-off-by: Duje Mihanović <duje@dujemihanovic.xyz>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for Samsung's S2MPG10 PMIC clock, which is similar to the
existing PMIC clocks supported by this driver.
S2MPG10 has three clock outputs @ 32kHz: AP, peri1 and peri2.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The Samsung S2MPG10 clock controller is similar to the existing clock
controllers supported by this binding. Register offsets / layout are
slightly different, so it needs its own compatible.
Acked-by: Stephen Boyd <sboyd@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: André Draszik <andre.draszik@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
- drop minItems from access-controllers
- remove rcc label from example
- fixes typos
- remove double '::' from 'See also::'
Acked-by: Conor Dooley <conor.dooley@microchip.com>
Signed-off-by: Gabriel Fernandez <gabriel.fernandez@foss.st.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
A clk lookup using clk_core_lookup() is currently somewhat expensive
since it has to walk the whole clk tree to find a match. This is
extremely bad in the clk_core_init() function where it is used to look
for clk name conflicts, which is always the worst case of walking the
whole tree. Moreover, the number of clks checked increases as more
clks are registered, causing each subsequent clk registration becoming
slower.
Add a hashtable for doing clk lookups to replace the tree walk method.
On arm64 this increases kernel memory usage by 4 KB for the hashtable,
and 16 bytes (2 pointers) for |struct hlist_node| in each clk. On a
platform with around 800 clks, this reduces the time spent in
clk_core_lookup() significantly:
| PID 0 | kworker |
| before | after | before | after |
-------------------------------------------
avg | 203 us | 2.7 us | 123 us | 1.5 us |
-------------------------------------------
min | 4.7 us | 2.3 us | 102 us | 0.9 us |
-------------------------------------------
max | 867 us | 4.8 us | 237 us | 3.5 us |
-------------------------------------------
culm | 109 ms | 1.5 ms | 21 ms | 0.3 ms |
This in turn reduces the time spent in clk_hw_register(), and
ultimately, boot time. On a different system with close to 700 clks,
This reduces boot time by around 110 ms. While this doesn't seem like
a lot, this helps in cases where minimizing boot time is important.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Tested-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
The clk core has its include statements in some random order.
Clean it up before we add more.
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Pull Microchip clk driver updates from Nicolas Ferre:
- add one clock for sam9x75
- new meaning for MCR register field in clk-master
- use force-write to PLL update register to ensure
reliable programming sequence
- update Analog Control Register (ACR) management to accommodate
differences across SoCs.
- ACR management dependency with one ARM PM patch added beforehand
* tag 'clk-microchip-6.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: remove default values for PMC_PLL_ACR
clk: at91: add ACR in all PLL settings
clk: at91: sam9x7: Add peripheral clock id for pmecc
clk: at91: clk-master: Add check for divide by 3
clk: at91: clk-sam9x60-pll: force write to PLL_UPDT register
ARM: at91: pm: save and restore ACR during PLL disable/enable
st/stih407-clock.dtsi file has been removed in commit 65322c1daf51
("clk: st: flexgen: remove unused compatible"). This file has three
compatibles which are now dangling. Remove them from documentation.
Signed-off-by: Raphael Gallais-Pou <rgallaispou@gmail.com>
Reviewed-by: Brian Masney <bmasney@redhat.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the MT8196 ovl1 clock controller, which provides clock
gate control for the display system. It is integrated with the mtk-mmsys
driver, which registers the ovl1 clock driver via
platform_device_register_data().
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the MT8196 ovl0 clock controller, which provides clock
gate control for the display system. It is integrated with the mtk-mmsys
driver, which registers the ovl0 clock driver via
platform_device_register_data().
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the MT8196 disp-ao clock controller, which provides
clock gate control for the display system. It is integrated with the
mtk-mmsys driver, which registers the disp-ao clock driver via
platform_device_register_data().
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the MT8196 disp1 clock controller, which provides clock
gate control for the display system. It is integrated with the mtk-mmsys
driver, which registers the disp1 clock driver via
platform_device_register_data().
Reviewed-by: Chen-Yu Tsai <wenst@chromium.org> # CLK_OPS_PARENT_ENABLE removal
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Add support for the MT8196 disp0 clock controller, which provides clock
gate control for the display system. It is integrated with the mtk-mmsys
driver, which registers the disp0 clock driver via
platform_device_register_data().
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
Introduce binding documentation for system clocks, functional clocks,
and PEXTP0/1 and UFS reset controllers on MediaTek MT8196.
This binding also includes a handle to the hardware voter, a
fixed-function MCU designed to aggregate votes from the application
processor and other remote processors to manage clocks and power
domains.
The HWV on MT8196/MT6991 is incomplete and requires software to manually
enable power supplies, parent clocks, and FENC, as well as write to both
the HWV MMIO and the controller registers.
Because of these constraints, the HWV cannot be modeled using generic
clock, power domain, or interconnect APIs. Instead, a custom phandle is
exceptionally used to provide direct, syscon-like register access to
drivers.
Reviewed-by: Nícolas F. R. A. Prado <nfraprado@collabora.com>
Co-developed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Signed-off-by: Stephen Boyd <sboyd@kernel.org>
