Add support for DRM_FORMAT_C8 to vesadrm. The new pixel-format
description PIXEL_FORMAT_C8 describes the layout. Vesadrm's helpers
vesadrm_fill_palette_lut() and vesadrm_load_palette_lut() set the
hardware palette according to the CRTC's output format.
The driver emulates XRGB8888 by converting the source buffer to
RGB332 and using the resulting 256 colors as index into the hardware
palette. The hardware palette converts back to RGB during scanout.
This has no overhead compared to other format conversion, but allows
common userspace, such as Wayland compositors, to operate on the
display.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-10-tzimmermann@suse.de
Add helper drm_crtc_fill_palette_332(), which fills palettes with
RGB332 color data. Each color in RGB332 format serves as an index
into an 8-bit palette that stores the corresponding component-based
colors.
Vesadrm will use the new helper to emulate RGB formats on top of
framebuffers in C8 format.
v2:
- add comments on bit operations (Javier)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-6-tzimmermann@suse.de
Use the color format stored in struct drm_sysfb_crtc_state for
color-format conversion instead of the scanout-buffer format
announced by firmware. Currently, both values are identical.
This will allow drivers to modify the CRTC's input format to a
certain extend. Specifically, vesadrm will be able to display RGB
framebuffers when the scanout buffer is of C8 format. With color-
format conversion to RGB332 and correct setup of the C8 palette,
displaying XRGB8888-based buffers under C8 can be achieved.
v2:
- refer to RGB332 as CRTC input format
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-5-tzimmermann@suse.de
Convert drm_sysfb_get_format_si() to lookup the screen_info color
format as struct pixel_format with screen_info_pixel_format(). Then
search the list of given formats for the screen_info format with
pixel_format_equal().
Replaces custom code with helpers. The pixel-compare helper
pixel_format_equal() also handles indexed color formats. Prepares
for sysfb drivers to support color palettes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-4-tzimmermann@suse.de
Add screen_info_pixel_format(), which converts a screen_info's
information about the color format to struct pixel_format. The encoding
within the screen_info structure is complex and therefore prone to
errors. Later patches will convert callers to use the pixel format.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Javier Martinez Canillas <javierm@redhat.com>
Link: https://lore.kernel.org/r/20250714151513.309475-3-tzimmermann@suse.de
Introduce a new HID quirk to indicate that this device has to be enabled
after the panel's backlight is enabled, and update the driver data for
the elan devices to enable this quirk. This cannot be a I2C HID quirk
because the kernel needs to acknowledge this before powering up the
device and read the VID/PID. When this quirk is enabled, register
.panel_enabled()/.panel_disabling() instead for the panel follower.
Also rename the *panel_prepare* functions into *panel_follower* because
they could be called in other situations now.
Fixes: bd3cba00dc ("HID: i2c-hid: elan: Add support for Elan eKTH6915 i2c-hid touchscreens")
Fixes: d06651bebf ("HID: i2c-hid: elan: Add elan-ekth6a12nay timing")
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Signed-off-by: Pin-yen Lin <treapking@chromium.org>
Acked-by: Jiri Kosina <jkosina@suse.com>
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20250818115015.2909525-2-treapking@chromium.org
At least for panel-bridges, the atomic_enable call is defined as being
called right after the preceding element in the display pipe is enabled.
It is also stated that "The bridge can assume that the display pipe (i.e.
clocks and timing signals) feeding it is running when this callback is
called"
This means the DSI controller driving this display would have already
switched over to video-mode from command mode and thus dcs functions
should not be called anymore at this point.
This caused a non-working display for me, when trying to enable
the rk3576 dsi controller using a display using this controller.
Therefore move the display_on/off calls the more appropriate
prepare/unprepare callbacks.
Reviewed-by: Neil Armstrong <neil.armstrong@linaro.org>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://lore.kernel.org/r/20250707164906.1445288-3-heiko@sntech.de
Commit fd40a63c63 ("drm/atomic: Let drivers decide which planes to
async flip") unintentionally disallowed no-op changes on non-primary
planes that the driver doesn't allow async flips on. This broke async
flips for compositors that disable the cursor plane in every async
atomic commit. To fix that, change drm_atomic_set_property to again
only run atomic_async_check if the plane would actually be changed by
the atomic commit.
Fixes: fd40a63c63 ("drm/atomic: Let drivers decide which planes to async flip")
Closes: https://gitlab.freedesktop.org/drm/amd/-/issues/4263
Signed-off-by: Xaver Hugl <xaver.hugl@kde.org>
Reviewed-by: André Almeida <andrealmeid@igalia.com>
Link: https://lore.kernel.org/r/20250822152849.87843-1-xaver.hugl@kde.org
[andrealmeid: fix checkpatch warning]
Signed-off-by: André Almeida <andrealmeid@igalia.com>
At least some panels using the LSB register are not happy with the
unconditional increase of the command buffer to 3 bytes.
With the BOE NE14QDM in my Dell Latitude 7455, the recent patches for
luminance based brightness have introduced a regression: the brightness
range stopped being contiguous and became nonsensical (it probably was
interpreting the last 2 bytes of the buffer and not the first 2).
Change from using a fixed sizeof() to a length variable that's only
set to 3 when luminance is used. Let's leave the default as 2 even for
the single-byte version, since that's how it worked before.
Fixes: f2db78e37f ("drm/dp: Modify drm_edp_backlight_set_level")
Signed-off-by: Val Packett <val@packett.cool>
Tested-by: Abel Vesa <abel.vesa@linaro.org>
Reviewed-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://lore.kernel.org/r/20250706204446.8918-1-val@packett.cool
Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
The drm_gpusvm_for_each_notifier, drm_gpusvm_for_each_notifier_safe and
drm_gpusvm_for_each_range_safe macros are useful for locating notifiers
and ranges within a user-specified range. By making these macros public,
we enable broader access and utility for developers who need to leverage
them in their implementations.
v2 (Matthew Brost)
- drop inline __drm_gpusvm_range_find
- /s/notifier_iter_first/drm_gpusvm_notifier_find
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250819162058.2777306-5-himal.prasad.ghimiray@intel.com
drm-misc-next for v6.18:
UAPI Changes:
- Add DRM_IOCTL_GEM_CHANGE_HANDLE for reassigning GEM handles
- Document DRM_MODE_PAGE_FLIP_EVENT
Cross-subsystem Changes:
fbcon:
- Add missing declarations in fbcon.h
Core Changes:
bridge:
- Fix ref counting
panel:
- Replace and remove mipi_dsi_generic_write_{seq/_chatty}()
sched:
- Fixes
Rust:
- Drop Opaque<> from ioctl arguments
Driver Changes:
amdxdma:
- Support buffers allocated by user space
- Streamline PM interfaces
- Fixes
bridge:
- cdns-dsi: Various improvements to mode setting
- Support Solomon SSD2825 plus DT bindings
- Support Waveshare DSI2DPI plus DT bindings
gud:
- Fixes
ivpu:
- Fixes
nouveau:
- Use GSP firmware by default
- Fixes
panel:
- panel-edp: Support mt8189 Chromebooks; Support BOE NV140WUM-N64;
Support SHP LQ134Z1; Fixes
- panel-simple: Support Olimex LCD-OLinuXino-5CTS plus DT bindings
- Support Samsung AMS561RA01
- Support Hydis HV101HD1 plus DT bindings
panthor:
- Print task/pid on errors
- Fixes
renesas:
- convert to RUNTIME_PM_OPS
repaper:
- Use shadow-plane helpers
rocket:
- Add driver for Rockchip NPU plus DT bindings
sharp-memory:
- Use shadow-plane helpers
simpledrm:
- Use of_reserved_mem_region_to_resource() helper
tidss:
- Use crtc_ fields for programming display mode
- Remove other drivers from aperture
v3d:
- Support querying nubmer of GPU resets for KHR_robustness
vmwgfx:
- Fixes
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://lore.kernel.org/r/20250814072454.GA18104@linux.fritz.box
Pull x86 fixes from Borislav Petkov:
- Remove a transitional asm/cpuid.h header which was added only as a
fallback during cpuid helpers reorg
- Initialize reserved fields in the SVSM page validation calls
structure to zero in order to allow for future structure extensions
- Have the sev-guest driver's buffers used in encryption operations be
in linear mapping space as the encryption operation can be offloaded
to an accelerator
- Have a read-only MSR write when in an AMD SNP guest trap to the
hypervisor as it is usually done. This makes the guest user
experience better by simply raising a #GP instead of terminating said
guest
- Do not output AVX512 elapsed time for kernel threads because the data
is wrong and fix a NULL pointer dereferencing in the process
- Adjust the SRSO mitigation selection to the new attack vectors
* tag 'x86_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpuid: Remove transitional <asm/cpuid.h> header
x86/sev: Ensure SVSM reserved fields in a page validation entry are initialized to zero
virt: sev-guest: Satisfy linear mapping requirement in get_derived_key()
x86/sev: Improve handling of writes to intercepted TSC MSRs
x86/fpu: Fix NULL dereference in avx512_status()
x86/bugs: Select best SRSO mitigation
Pull locking fixes from Borislav Petkov:
- Make sure sanity checks down in the mutex lock path happen on the
correct type of task so that they don't trigger falsely
- Use the write unsafe user access pairs when writing a futex value to
prevent an error on PowerPC which does user read and write accesses
differently
* tag 'locking_urgent_for_v6.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking: Fix __clear_task_blocked_on() warning from __ww_mutex_wound() path
futex: Use user_write_access_begin/_end() in futex_put_value()
Pull rust fixes from Miguel Ojeda:
- Workaround 'rustdoc' target modifiers bug in Rust >= 1.88.0. It will
be fixed in Rust 1.90.0 (expected 2025-09-18).
- Clean 'rustdoc' output before running it to avoid confusing the tool
when files from previous versions remain.
* tag 'rust-fixes-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/ojeda/linux:
rust: kbuild: clean output before running `rustdoc`
rust: workaround `rustdoc` target modifiers bug
Pull ata fixes from Damien Le Moal:
- Fix a regression affecting old IDE/PATA device scan and introduced by
the recent link power management cleanups & fixes. The regression
prevented devices from being properly detected (me)
- Fix command duration limits (CDL) feature control: attempting to
enable the feature while NCQ commands are being executed resulted in
a silent failure to enable CDL when needed (Igor)
* tag 'ata-ata-6.17-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Fix CDL control
ata: libata-eh: Fix link state check for IDE/PATA ports
Pull SCSI fixes from James Bottomley:
"One core change removing the 'w' access flag of attributes that don't
have a set routine (and therefore can't be written to) which should
have no practical impact. The big scsi_debug update is caused by
reformatting lots of arrays and the rest of the bug fixes in drivers
are trivial"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: ufs: core: Remove error print for devm_add_action_or_reset()
scsi: ufs: mediatek: Fix out-of-bounds access in MCQ IRQ mapping
scsi: lpfc: Remove redundant assignment to avoid memory leak
scsi: lpfc: Fix wrong function reference in a comment
scsi: ufs: core: Fix interrupt handling for MCQ Mode
scsi: scsi_debug: Make read-only arrays static const
scsi: core: sysfs: Correct sysfs attributes access rights
Pull drm fixes from Dave Airlie:
"Relatively quiet week, usual amdgpu/i915/xe fixes along with a set of
fixes for fbdev format info, which fix some regressions seen in with
rc1.
bridge:
- fix OF-node leak
- fix documentation
fbdev-emulation:
- pass correct format info to drm_helper_mode_fill_fb_struct()
panfrost:
- print correct RSS size
amdgpu:
- PSP fix
- VRAM reservation fix
- CSA fix
- Process kill fix
i915:
- Fix the implementation of wa_18038517565 [fbc]
- Do not trigger Frame Change events from frontbuffer flush [psr]
xe:
- Some more xe_migrate_access_memory fixes (Auld)
- Defer buffer object shrinker write-backs and GPU waits (Thomas)
- HWMON fix for clamping limits (Karthik)
- SRIOV-PF: Set VF LMEM BAR size (Michal)"
* tag 'drm-fixes-2025-08-16' of https://gitlab.freedesktop.org/drm/kernel:
drm/xe/pf: Set VF LMEM BAR size
drm/amdgpu: fix task hang from failed job submission during process kill
drm/amdgpu: fix incorrect vm flags to map bo
drm/amdgpu: fix vram reservation issue
drm/amdgpu: Add PSP fw version check for fw reserve GFX command
drm/xe/hwmon: Add SW clamp for power limits writes
drm/xe: Defer buffer object shrinker write-backs and GPU waits
drm/xe/migrate: prevent potential UAF
drm/xe/migrate: don't overflow max copy size
drm/xe/migrate: prevent infinite recursion
drm/i915/psr: Do not trigger Frame Change events from frontbuffer flush
drm/i915/fbc: fix the implementation of wa_18038517565
drm/panfrost: Print RSS for tiler heap BO's in debugfs GEMS file
drm/radeon: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/nouveau: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/omap: Pass along the format info from .fb_create() to drm_helper_mode_fill_fb_struct()
drm/bridge: document HDMI CEC callbacks
drm/bridge: Describe the newly introduced drm_connector parameter for drm_bridge_detect
drm/bridge: fix OF node leak
Pull xfs fixes from Carlos Maiolino:
- Fix an assert trigger introduced during the merge window
- Prevent atomic writes to be used with DAX
- Prevent users from using the max_atomic_write mount option without
reflink, as atomic writes > 1block are not supported without reflink
- Fix a null-pointer-deref in a tracepoint
* tag 'xfs-fixes-6.17-rc2' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: split xfs_zone_record_blocks
xfs: fix scrub trace with null pointer in quotacheck
xfs: reject max_atomic_write mount option for no reflink
xfs: disallow atomic writes on DAX
fs/dax: Reject IOCB_ATOMIC in dax_iomap_rw()
xfs: remove XFS_IBULK_SAME_AG
xfs: fully decouple XFS_IBULK* flags from XFS_IWALK* flags
xfs: fix frozen file system assert in xfs_trans_alloc
