Couple of variables are actually useless, remove them to save some gcc
warning:
drivers/video/fbdev/riva/riva_hw.c:250:21: warning: variable ‘mlwm’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:15: warning: variable ‘vraw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:665:9: warning: variable ‘craw’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:73: warning: variable ‘align’ set
but not used [-Wunused-but-set-variable]
drivers/video/fbdev/riva/riva_hw.c:659:50: warning: variable
‘color_key_enable’ set but not used [-Wunused-but-set-variable]
Signed-off-by: Alex Shi <alex.shi@linux.alibaba.com>
Cc: Antonino Daplas <adaplas@gmail.com>
Cc: linux-fbdev@vger.kernel.org
Cc: dri-devel@lists.freedesktop.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1604822519-65607-1-git-send-email-alex.shi@linux.alibaba.com
On the SII9022, the IOVCC and CVCC12 supplies must reach the correct
voltage before the reset sequence is initiated. On most boards, this
assumption is true at boot-up, so initialization succeeds.
However, when we try to initialize the chip with incorrect supply
voltages, it will not respond to I2C requests. sii902x_probe() fails
with -ENXIO.
To resolve this, look for the "iovcc" and "cvcc12" regulators, and
make sure they are enabled before starting the reset sequence. If
these supplies are not available in devicetree, then they will default
to dummy-regulator. In that case everything will work like before.
This was observed on a STM32MP157C-DK2 booting in u-boot falcon mode.
On this board, the supplies would be set by the second stage
bootloader, which does not run in falcon mode.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
[Fix checkpatch warnings]
Link: https://patchwork.freedesktop.org/patch/msgid/20201020221501.260025-2-mr.nuke.me@gmail.com
We should be setting the drm_dp_aux_msg::reply field if a NACK or a
SHORT reply happens. Update the error bit handling logic in
ti_sn_aux_transfer() to handle these cases and notify upper layers that
such errors have happened. This helps the retry logic understand that a
timeout has happened, or to shorten the read length if the panel isn't
able to handle the longest read possible.
Note: I don't have any hardware that exhibits these code paths so this
is written based on reading the datasheet for this bridge and inspecting
the code and how this is called.
Changes in v2:
- Move WRITE_STATUS_UPDATE check from case to assignment
Changes in v2:
- Handle WRITE_STATUS_UPDATE properly
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Cc: Laurent Pinchart <Laurent.pinchart@ideasonboard.com>
Cc: Jonas Karlman <jonas@kwiboo.se>
Cc: Jernej Skrabec <jernej.skrabec@siol.net>
Cc: Sean Paul <seanpaul@chromium.org>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Stephen Boyd <swboyd@chromium.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201102181144.3469197-5-swboyd@chromium.org
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/mga/mga_dma.c:29: warning: Cannot understand * file mga_dma.c
drivers/gpu/drm/mga/mga_dma.c:455: warning: Function parameter or member 'dev' not described in 'mga_do_agp_dma_bootstrap'
drivers/gpu/drm/mga/mga_dma.c:455: warning: Function parameter or member 'dma_bs' not described in 'mga_do_agp_dma_bootstrap'
drivers/gpu/drm/mga/mga_dma.c:629: warning: Function parameter or member 'dev' not described in 'mga_do_pci_dma_bootstrap'
drivers/gpu/drm/mga/mga_dma.c:629: warning: Function parameter or member 'dma_bs' not described in 'mga_do_pci_dma_bootstrap'
drivers/gpu/drm/mga/mga_dma.c:1150: warning: Function parameter or member 'dev' not described in 'mga_driver_unload'
drivers/gpu/drm/mga/mga_dma.c:1159: warning: Function parameter or member 'dev' not described in 'mga_driver_lastclose'
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: by <jhartmann@precisioninsight.com>
Cc: Faith <faith@valinux.com>
Cc: Jeff Hartmann <jhartmann@valinux.com>
Cc: Keith Whitwell <keith@tungstengraphics.com>
Cc: Gareth Hughes <gareth@valinux.com>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201106214949.2042120-5-lee.jones@linaro.org
Noticed this when trying to compile with -Wall on a kernel fork. We
potentially don't set width here, which causes the compiler to complain
about width potentially being uninitialized in drm_cvt_modes(). So, let's
fix that.
Changes since v1:
* Don't emit an error as this code isn't reachable, just mark it as such
Changes since v2:
* Remove now unused variable
Fixes: 3f649ab728 ("treewide: Remove uninitialized_var() usage")
Signed-off-by: Lyude Paul <lyude@redhat.com>
Reviewed-by: Ilia Mirkin <imirkin@alum.mit.edu>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105235703.1328115-1-lyude@redhat.com
idr_init() uses base 0 which is an invalid identifier for this driver.
The idr_alloc for this driver uses VC4_PERFMONID_MIN as start value for
ID range and it is #defined to 1. The new function idr_init_base allows
IDR to set the ID lookup from base 1. This avoids all lookups that
otherwise starts from 0 since 0 is always unused / available.
References: commit 6ce711f275 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105202135.GA145111@localhost
idr_init() uses base 0 which is an invalid identifier for this driver.
The idr_alloc for this driver uses 1 as start value for ID range. The
new function idr_init_base allows IDR to set the ID lookup from base 1.
This avoids all lookups that otherwise starts from 0 since 0 is always
unused / available.
References: commit 6ce711f275 ("idr: Make 1-based IDRs more efficient")
Signed-off-by: Deepak R Varma <mh12gx2825@gmail.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20201105185016.GA71797@localhost
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>
Fixes the following W=1 kernel build warning(s):
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_THROUGH' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_ALIGNED' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_320X240' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_SRGB_DUMMY_360X240' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_1' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_THROUGH' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_PRGB_ALIGNED' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_640X320_YCBCR' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_YUV_720X360_YCBCR' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_DISABLED_2' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_720X360_YCBCR' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_ITU_R_BT656_640X320_YCBCR' not described in enum 'ili9322_input'
drivers/gpu/drm/panel/panel-ilitek-ili9322.c:177: warning: Enum value 'ILI9322_INPUT_UNKNOWN' not described in enum 'ili9322_input'
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Cc: Linus Walleij <linus.walleij@linaro.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Lee Jones <lee.jones@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20201105144517.1826692-17-lee.jones@linaro.org
Initializes Mipi DSI and sets up connects to ADV bridge
v2: removed license text
upclassed dev_private, removed HAVE_IRQ. (Sam)
v3: Squashed all 59 commits to one
v4: review changes from Sam Ravnborg
renamed dev_p to kmb
v5: corrected spellings
v6: corrected checkpatch warnings
v7: review changes Sam Ravnborg and Thomas Zimmerman
removed unnecessary logs and defines and ifdef codes (Sam)
split dphy_init_sequence smaller (Sam)
removed redundant checks in kmb_dsi (Sam)
changed kmb_dsi_init to drm_bridge_connector_init and
drm_connector_attach_encoder to bridge's connector (Sam)
v8: call drm_bridge_attach with DRM_BRIDGE_ATTACH_NO_CONNECTOR
v9: renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V)
v10: changes in driver to accommodate changes in DT to separate DSI
entries (Sam R)
added comments to clarify empty dsi host functions
review changes from Sam to separate out DSI part,
removed dependencies on drm side (Sam R)
v11: review changes for separate msscam node (Sam R, Neil A)
v12: fixed warnings Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1604538931-26726-7-git-send-email-anitha.chrisanthus@intel.com
This is a basic KMS atomic modesetting display driver for KeemBay family of
SOCs. Driver has no 2D or 3D graphics. It calls into the ADV bridge
driver at the connector level.
Single CRTC with LCD controller->mipi DSI->ADV bridge
Only 1080p resolution and single plane is supported at this time.
v2: moved extern to .h, removed license text
use drm_dev_init, upclassed dev_private, removed HAVE_IRQ.(Sam)
v3: Squashed all 59 commits to one
v4: review changes from Sam Ravnborg
renamed dev_p to kmb
moved clocks under kmb_clock, consolidated clk initializations
use drmm functions
use DRM_GEM_CMA_DRIVER_OPS_VMAP
v5: corrected spellings
v6: corrected checkpatch warnings
v7: review changes Sam Ravnborg and Thomas Zimmerman
removed kmb_crtc.h kmb_crtc_cleanup (Thomas)
renamed mode_set, kmb_load, inlined unload (Thomas)
moved remaining logging to drm_*(Thomas)
re-orged driver initialization (Thomas)
moved plane_status to drm_private (Sam)
removed unnecessary logs and defines and ifdef codes (Sam)
call helper_check in plane_atomic_check (Sam)
renamed set to get for bpp and format functions(Sam)
use drm helper functions for reset, duplicate/destroy state instead
of kmb functions (Sam)
removed kmb_priv from kmb_plane and removed kmb_plane_state (Sam)
v8: get clk_pll0 from display node in dt
v9: moved csc_coef_lcd to plane.c (Daniel Vetter)
call drm_atomic_helper_shutdown in remove (Daniel V)
use drm_crtc_handle_vblank (Daniel V)
renamed kmb_dsi_hw_init to kmb_dsi_mode_set (Daniel V)
complimentary changes to device tree changes (Rob)
v10: call drm_crtc_arm_vblank_event in atomic_flush (Daniel V)
moved global vars to kmb_private and added locks (Daniel V)
changes in driver to accommodate changes in DT to separate DSI
entries (Sam R)
review changes to separate mipi DSI (Sam R)
v11: review changes to separate msscam (Neil A,Sam R)
v12: fixed warnings Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Anitha Chrisanthus <anitha.chrisanthus@intel.com>
Reviewed-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/1604538931-26726-6-git-send-email-anitha.chrisanthus@intel.com
