The raydium I2C touchscreen driver is currently manually managing the
wake IRQ. This change removes the explicit enable_irq_wake /
disable_irq_wake and instead relies on the PM subsystem. This is done by
calling dev_pm_set_wake_irq.
i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Link: https://lore.kernel.org/r/20220929093200.v6.4.I06b417b274bbecb31775a73993a7a3c1bc80de7b@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Elan I2C touchscreen driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.
i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Link: https://lore.kernel.org/r/20220929093200.v6.3.I5862429ee3e4de0f9ad5ba01ce07ad99eec10cf0@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Elan I2C touchpad driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.
i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.
I tested this on an ACPI system where the touchpad doesn't have _PRW
defined. I verified I can still wake the system and that the wake source
was the touchpad IRQ GPIO.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Link: https://lore.kernel.org/r/20220929093200.v6.2.Id022caf53d01112188308520915798f08a33cd3e@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The I2C hid driver is currently manually managing the wake
IRQ. This change removes the explicit enable_irq_wake/disable_irq_wake
and instead relies on the PM subsystem. This is done by calling
dev_pm_set_wake_irq.
i2c_device_probe already calls dev_pm_set_wake_irq when using device
tree, and i2c_device_remove also already calls dev_pm_clear_wake_irq.
There could be some device tree systems that have incorrectly declared
`wake` capabilities, so this change will set the wake irq if one is
missing. This matches the previous behavior.
I tested this on an ACPI system that has a HID touchscreen and verified
the IRQ was armed for wake on suspend.
Signed-off-by: Raul E Rangel <rrangel@chromium.org>
Acked-by: Benjamin Tissoires <benjamin.tissoires@redhat.com>
Link: https://lore.kernel.org/r/20220929093200.v6.1.Id4b4bdfe06e2caf2d5a3c9dd4a9b1080c38b539c@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
pwm_request() isn't recommended to be used any more because it relies on
global IDs for the PWM which comes with different difficulties.
The new way to do things is to find the right PWM using a reference from
the platform device. (This can be created either using a device-tree
or a platform lookup table, see e.g. commit 5a4412d4a8 ("ARM: pxa:
tavorevb: Use PWM lookup table") how to do this.)
There are no in-tree users, so there are no other code locations that need
adaption.
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Acked-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20221117073543.3790449-1-u.kleine-koenig@pengutronix.de
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
As can be seen in elants_i2c_power_off(), we want the reset GPIO
asserted when power is off. The reset GPIO is active low so we need
the reset line logic low when power is off to avoid leakage.
We have a problem, though, at probe time. At probe time we haven't
powered the regulators on yet but we have:
devm_gpiod_get(&client->dev, "reset", GPIOD_OUT_LOW);
While that _looks_ right, it turns out that it's not. The
GPIOD_OUT_LOW doesn't mean to init the GPIO to low. It means init the
GPIO to "not asserted". Since this is an active low GPIO that inits it
to be high.
Let's fix this to properly init the GPIO. Now after both probe and
power off the state of the GPIO is consistent (it's "asserted" or
level low).
Once we fix this, we can see that at power on time we no longer to
assert the reset GPIO as the first thing. The reset GPIO is _always_
asserted before powering on. Let's fix powering on to account for
this.
Fixes: afe10358e4 ("Input: elants_i2c - wire up regulator support")
Signed-off-by: Douglas Anderson <dianders@chromium.org>
Link: https://lore.kernel.org/r/20221117123805.1.I9959ac561dd6e1e8e1ce7085e4de6167b27c574f@changeid
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
In the very unlikely event the cst3xx_i2c_write() fails inside of the
cst3xx_bootloader_enter() function 5 times in a row, the uninitalized
value of tmp will get compared to CST3XX_BOOTLDR_CHK_VAL. Initialize
the value of tmp to 0 so that in this unlikely event we are comparing
0 instead of an uninitalized variable.
Fixes: 66603243f5 ("Input: add driver for Hynitron cstxxx touchscreens")
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Link: https://lore.kernel.org/r/20221117195921.2291-1-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The fixp_sin32_rad() contains a call to BUG_ON(). If users of
fixp-arith.h have not included the bug.h prior including the fixp-arith.h
the compiler will not find the BUG_ON. Thus every user of fixp-arith.h
must also include bug.h (or roll own variant of BUG_ON()).
Include bug.h from fixp-arith.h so every user of fixp-arith.h does not
need to include the bug.h prior inclusion of fixp-arith.h
Fixes: 559addc25b ("[media] fixp-arith: replace sin/cos table by a better precision one")
Signed-off-by: Matti Vaittinen <matti.vaittinen@fi.rohmeurope.com>
Link: https://lore.kernel.org/r/Y3SgVdVey9legtX+@dc75zzyyyyyyyyyyyyydt-3.rev.dnainternet.fi
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
This patch adds support for Himax hx83112b touchscreen devices. As there
are no publicly available data sheets for these devices, the
implementation is based on the driver of the downstream Android kernel
used in the Fairphone 3. This patch is a complete rewrite, though, and
the code bears no resemblence to the original implementation.
The driver has been tested on the aforementioned phone.
Signed-off-by: Job Noorman <job@noorman.info>
Reviewed-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/20221107105604.26541-3-job@noorman.info
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The Allwinner F1C100s series of SoCs contain a LRADC (aka. KEYADC)
compatible to the version in other SoCs.
The manual doesn't mention the ratio of the input voltage that is used,
but comparing actual measurements with the values in the register
suggests that it is 3/4 of Vref.
Add an F1C100s compatible string to the list, and pair it with the
A83T fallback. Since the A64 is the same, combined both using an enum.
Signed-off-by: Andre Przywara <andre.przywara@arm.com>
Acked-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/20221101141658.3631342-9-andre.przywara@arm.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some Pin/GPIO controllers can't get current GPIO status when interrupt
mode is set. Specifically Ingenic's JZ4755 always returns status at the
moment of interrupt.
The patch tries to fix that by forcibly setting pin mode to GPIO input
prior to reading actual row status. enable_row_irqs seems to set
interrupt mode back as it should be.
Signed-off-by: Siarhei Volkau <lis8215@gmail.com>
Link: https://lore.kernel.org/r/20221102165747.1528988-1-lis8215@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Add support for the Hynitron cst3xx controller found on devices such
as the Anbernic RG353P and RG353V (the Hynitron CST340). This driver
was built from sources provided by Hynitron to Anbernic (possibly
via Rockchip as an intermediary) and marked as GPLv2 in the code.
This driver was written strictly for the cst3xx series, but in
most places was left somewhat generic so support could be easily
added to other devices in the future.
Signed-off-by: Chris Morgan <macromorgan@hotmail.com>
Link: https://lore.kernel.org/r/20221028202636.14341-4-macroalpha82@gmail.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The driver is using of_property_read_u32() and therefore needs to include
of.h header.
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The board file for Wolfson Cragganmore 6410 uses various KEY_* defines,
but does not include the relevant header directly and instead relies on
other headers to include it indirectly. With the upcoming cleanup of
matrix_keypad.h this indirection is now broken and we should include the
relevant header directly.
Reported-by: kernel test robot <lkp@intel.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/Y1wHwEm15/K87tdq@google.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
IQS7222A revisions 1.13 and later widen the gesture multiplier from
x4 ms to x16 ms; update the binding accordingly.
As part of this change, refresh the corresponding properties in the
example as well.
Fixes: 44dc42d254 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Y1SRaVGwj30z/g6r@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Select variants of silicon do not define a default slider size, in
which case the size must be specified in the device tree. If it is
not, the axis's maximum value is reported as 65535 due to unsigned
integer overflow.
To solve this problem, move the existing zero-check outside of the
conditional block that checks whether the property is present.
Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y1SRXEi7XMlncDWk@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Nonzero return values of several calls to fwnode_property_read_u32()
are silently ignored, leaving no way to know the properties were not
applied in the event of an error.
Solve this problem by evaluating fwnode_property_read_u32()'s return
value, and reporting an error for any nonzero return value not equal
to -EINVAL which indicates the property was absent altogether.
Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Mattijs Korpershoek <mkorpershoek@baylibre.com>
Link: https://lore.kernel.org/r/Y1SRRrpQXvkETjfm@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Following a recent refactor of the driver to properly drop unused
device nodes, the 'linux,code' property is now optional. This can
be useful for applications that define GPIO-mapped events that do
not correspond to any keycode.
Fixes: 44dc42d254 ("dt-bindings: input: Add bindings for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Link: https://lore.kernel.org/r/Y1SROIrrC1LwX0Sd@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Each call to device/fwnode_get_named_child_node() must be matched
with a call to fwnode_handle_put() once the corresponding node is
no longer in use. This ensures a reference count remains balanced
in the case of dynamic device tree support.
Currently, the driver never calls fwnode_handle_put(). Solve this
problem by moving the node handling from iqs7222_parse_props() to
the new iqs7222_parse_reg_grp(), leaving the former to do nothing
but parse properties. The latter then manages the reference count
in a single location and consistent fashion.
This change drastically simplifies iqs7222_parse_all(), which can
then call iqs7222_parse_reg_grp() on every register group without
having to treat each register group differently.
For nested event nodes, common parsing code has been factored out
to the new iqs7222_parse_event() so as to allow the event node to
be dropped from as few locations as possible.
As part of this refactor, the 'linux,code' property has been made
optional. This enables applications that define an event with the
sole purpose of enabling a GPIO.
Fixes: e505edaedc ("Input: add support for Azoteq IQS7222A/B/C")
Signed-off-by: Jeff LaBundy <jeff@labundy.com>
Link: https://lore.kernel.org/r/Y1SRJIQ3WPwNpC0K@nixie71
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Pull more random number generator updates from Jason Donenfeld:
"This time with some large scale treewide cleanups.
The intent of this pull is to clean up the way callers fetch random
integers. The current rules for doing this right are:
- If you want a secure or an insecure random u64, use get_random_u64()
- If you want a secure or an insecure random u32, use get_random_u32()
The old function prandom_u32() has been deprecated for a while
now and is just a wrapper around get_random_u32(). Same for
get_random_int().
- If you want a secure or an insecure random u16, use get_random_u16()
- If you want a secure or an insecure random u8, use get_random_u8()
- If you want secure or insecure random bytes, use get_random_bytes().
The old function prandom_bytes() has been deprecated for a while
now and has long been a wrapper around get_random_bytes()
- If you want a non-uniform random u32, u16, or u8 bounded by a
certain open interval maximum, use prandom_u32_max()
I say "non-uniform", because it doesn't do any rejection sampling
or divisions. Hence, it stays within the prandom_*() namespace, not
the get_random_*() namespace.
I'm currently investigating a "uniform" function for 6.2. We'll see
what comes of that.
By applying these rules uniformly, we get several benefits:
- By using prandom_u32_max() with an upper-bound that the compiler
can prove at compile-time is ≤65536 or ≤256, internally
get_random_u16() or get_random_u8() is used, which wastes fewer
batched random bytes, and hence has higher throughput.
- By using prandom_u32_max() instead of %, when the upper-bound is
not a constant, division is still avoided, because
prandom_u32_max() uses a faster multiplication-based trick instead.
- By using get_random_u16() or get_random_u8() in cases where the
return value is intended to indeed be a u16 or a u8, we waste fewer
batched random bytes, and hence have higher throughput.
This series was originally done by hand while I was on an airplane
without Internet. Later, Kees and I worked on retroactively figuring
out what could be done with Coccinelle and what had to be done
manually, and then we split things up based on that.
So while this touches a lot of files, the actual amount of code that's
hand fiddled is comfortably small"
* tag 'random-6.1-rc1-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/crng/random:
prandom: remove unused functions
treewide: use get_random_bytes() when possible
treewide: use get_random_u32() when possible
treewide: use get_random_{u8,u16}() when possible, part 2
treewide: use get_random_{u8,u16}() when possible, part 1
treewide: use prandom_u32_max() when possible, part 2
treewide: use prandom_u32_max() when possible, part 1
Pull more perf tools updates from Arnaldo Carvalho de Melo:
- Use BPF CO-RE (Compile Once, Run Everywhere) to support old kernels
when using bperf (perf BPF based counters) with cgroups.
- Support HiSilicon PCIe Performance Monitoring Unit (PMU), that
monitors bandwidth, latency, bus utilization and buffer occupancy.
Documented in Documentation/admin-guide/perf/hisi-pcie-pmu.rst.
- User space tasks can migrate between CPUs, so when tracing selected
CPUs, system-wide sideband is still needed, fix it in the setup of
Intel PT on hybrid systems.
- Fix metricgroups title message in 'perf list', it should state that
the metrics groups are to be used with the '-M' option, not '-e'.
- Sync the msr-index.h copy with the kernel sources, adding support for
using "AMD64_TSC_RATIO" in filter expressions in 'perf trace' as well
as decoding it when printing the MSR tracepoint arguments.
- Fix program header size and alignment when generating a JIT ELF in
'perf inject'.
- Add multiple new Intel PT 'perf test' entries, including a jitdump
one.
- Fix the 'perf test' entries for 'perf stat' CSV and JSON output when
running on PowerPC due to an invalid topology number in that arch.
- Fix the 'perf test' for arm_coresight failures on the ARM Juno
system.
- Fix the 'perf test' attr entry for PERF_FORMAT_LOST, adding this
option to the or expression expected in the intercepted
perf_event_open() syscall.
- Add missing condition flags ('hs', 'lo', 'vc', 'vs') for arm64 in the
'perf annotate' asm parser.
- Fix 'perf mem record -C' option processing, it was being chopped up
when preparing the underlying 'perf record -e mem-events' and thus
being ignored, requiring using '-- -C CPUs' as a workaround.
- Improvements and tidy ups for 'perf test' shell infra.
- Fix Intel PT information printing segfault in uClibc, where a NULL
format was being passed to fprintf.
* tag 'perf-tools-for-v6.1-2-2022-10-16' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (23 commits)
tools arch x86: Sync the msr-index.h copy with the kernel sources
perf auxtrace arm64: Add support for parsing HiSilicon PCIe Trace packet
perf auxtrace arm64: Add support for HiSilicon PCIe Tune and Trace device driver
perf auxtrace arm: Refactor event list iteration in auxtrace_record__init()
perf tests stat+json_output: Include sanity check for topology
perf tests stat+csv_output: Include sanity check for topology
perf intel-pt: Fix system_wide dummy event for hybrid
perf intel-pt: Fix segfault in intel_pt_print_info() with uClibc
perf test: Fix attr tests for PERF_FORMAT_LOST
perf test: test_intel_pt.sh: Add 9 tests
perf inject: Fix GEN_ELF_TEXT_OFFSET for jit
perf test: test_intel_pt.sh: Add jitdump test
perf test: test_intel_pt.sh: Tidy some alignment
perf test: test_intel_pt.sh: Print a message when skipping kernel tracing
perf test: test_intel_pt.sh: Tidy some perf record options
perf test: test_intel_pt.sh: Fix return checking again
perf: Skip and warn on unknown format 'configN' attrs
perf list: Fix metricgroups title message
perf mem: Fix -C option behavior for perf mem record
perf annotate: Add missing condition flags for arm64
...
Pull Kbuild fixes from Masahiro Yamada:
- Fix CONFIG_DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT=y compile error for the
combination of Clang >= 14 and GAS <= 2.35.
- Drop vmlinux.bz2 from the rpm package as it just annoyingly increased
the package size.
- Fix modpost error under build environments using musl.
- Make *.ll files keep value names for easier debugging
- Fix single directory build
- Prevent RISC-V from selecting the broken DWARF5 support when Clang
and GAS are used together.
* tag 'kbuild-fixes-v6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
lib/Kconfig.debug: Add check for non-constant .{s,u}leb128 support to DWARF5
kbuild: fix single directory build
kbuild: add -fno-discard-value-names to cmd_cc_ll_c
scripts/clang-tools: Convert clang-tidy args to list
modpost: put modpost options before argument
kbuild: Stop including vmlinux.bz2 in the rpm's
Kconfig.debug: add toolchain checks for DEBUG_INFO_DWARF_TOOLCHAIN_DEFAULT
Kconfig.debug: simplify the dependency of DEBUG_INFO_DWARF4/5
