We're moving pistachio to generic MIPS kernel. The clk driver
should be avilable to the generic MIPS kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Acked-by: Stephen Boyd <sboyd@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
CPC and CDMM addresses are adjustable and we should tell kernel
how to place them in devicetree.
Note that MACH_PISTACHIO code hardcoded CDMM base to 0x1bdd0000,
however it will collide with GIC address range. As we don't have
any CDMM device on this platform it won't be a problem.
I found another spare range, 0x1bdf0000~0x1be00000 to place CDMM
instead.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Marduk is based on IMG pistachio SoC. The platform is using
MIPS UHI booting protocol and does have a proper devicetree
implement, thus it could be a part of generic kernel.
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
LOONGSON_UART_BASE depends on EARLY_PRINTK || SERIAL_8250, but when
neither of these Kconfig symbols is set, the kernel build has errors:
../arch/mips/loongson2ef/common/serial.c: In function 'serial_init':
../arch/mips/loongson2ef/common/serial.c:66:25: error: 'loongson_uart_base' undeclared (first use in this function)
66 | loongson_uart_base;
../arch/mips/loongson2ef/common/serial.c:66:25: note: each undeclared identifier is reported only once for each function it appears in
../arch/mips/loongson2ef/common/serial.c:68:41: error: '_loongson_uart_base' undeclared (first use in this function)
68 | (void __iomem *)_loongson_uart_base;
Fix this by building serial.o only when one (or both) of these
Kconfig symbols is enabled.
Tested with:
(a) EARLY_PRINTK=y, SERIAL_8250 not set;
(b) EARLY_PRINTK=y, SERIAL_8250=y;
(c) EARLY_PRINTK=y, SERIAL_8250=m.
(d) EARLY_PRINTK not set, SERIAL_8250=y;
(e) EARLY_PRINTK not set, SERIAL_8250=m;
(f) EARLY_PRINTK not set, SERIAL_8250 not set.
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Jiaxun Yang <jiaxun.yang@flygoat.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The functions get_online_cpus() and put_online_cpus() have been
deprecated during the CPU hotplug rework. They map directly to
cpus_read_lock() and cpus_read_unlock().
Replace deprecated CPU-hotplug functions with the official version.
The behavior remains unchanged.
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Clean up kernel-doc warnings in arch/mips/mm/c-octeon.c.
arch/mips/mm/c-octeon.c:34: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Octeon automatically flushes the dcache on tlb changes, so
arch/mips/mm/c-octeon.c:65: warning: expecting prototype for Flush caches as necessary for all cores affected by a(). Prototype was for octeon_flush_icache_all_cores() instead
arch/mips/mm/c-octeon.c:99: warning: expecting prototype for Called to flush the icache on all cores(). Prototype was for octeon_flush_icache_all() instead
arch/mips/mm/c-octeon.c:111: warning: expecting prototype for Called to flush all memory associated with a memory(). Prototype was for octeon_flush_cache_mm() instead
arch/mips/mm/c-octeon.c:124: warning: Function parameter or member 'start' not described in 'octeon_flush_icache_range'
arch/mips/mm/c-octeon.c:124: warning: Function parameter or member 'end' not described in 'octeon_flush_icache_range'
arch/mips/mm/c-octeon.c:124: warning: expecting prototype for Flush a range of kernel addresses out of the icache(). Prototype was for octeon_flush_icache_range() instead
arch/mips/mm/c-octeon.c:138: warning: expecting prototype for Flush a range out of a vma(). Prototype was for octeon_flush_cache_range() instead
arch/mips/mm/c-octeon.c:153: warning: expecting prototype for Flush a specific page of a vma(). Prototype was for octeon_flush_cache_page() instead
arch/mips/mm/c-octeon.c:164: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Probe Octeon's caches
arch/mips/mm/c-octeon.c:264: warning: expecting prototype for Setup the Octeon cache flush routines(). Prototype was for octeon_cache_init() instead
arch/mips/mm/c-octeon.c:349: warning: expecting prototype for Called when the the exception is not recoverable(). Prototype was for cache_parity_error_octeon_non_recoverable() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Convert function comments to kernel-doc notation to remove
kernel-doc warnings in arch/mips/cavium-octeon/*.c.
Also clean up the comments in a few places.
arch/mips/cavium-octeon/flash_setup.c:66: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Module/ driver initialization.
--
arch/mips/cavium-octeon/setup.c:308: warning: expecting prototype for Return non zero if we are currently running in the Octeon simulator(). Prototype was for octeon_is_simulation() instead
arch/mips/cavium-octeon/setup.c:314: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Return true if Octeon is in PCI Host mode. This means
arch/mips/cavium-octeon/setup.c:334: warning: expecting prototype for Get the clock rate of Octeon(). Prototype was for octeon_get_clock_rate() instead
arch/mips/cavium-octeon/setup.c:351: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Write to the LCD display connected to the bootbus. This display
arch/mips/cavium-octeon/setup.c:380: warning: expecting prototype for Return the console uart passed by the bootloader(). Prototype was for octeon_get_boot_uart() instead
arch/mips/cavium-octeon/setup.c:386: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Get the coremask Linux was booted on.
arch/mips/cavium-octeon/setup.c:399: warning: expecting prototype for Check the hardware BIST results for a CPU(). Prototype was for octeon_check_cpu_bist() instead
arch/mips/cavium-octeon/setup.c:432: warning: expecting prototype for Reboot Octeon(). Prototype was for octeon_restart() instead
arch/mips/cavium-octeon/setup.c:452: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Permanently stop a core.
arch/mips/cavium-octeon/setup.c:475: warning: expecting prototype for Halt the system(). Prototype was for octeon_halt() instead
arch/mips/cavium-octeon/setup.c:520: warning: expecting prototype for Return a string representing the system type(). Prototype was for octeon_board_type_string() instead
arch/mips/cavium-octeon/setup.c:661: warning: expecting prototype for Early entry point for arch setup(). Prototype was for prom_init() instead
--
arch/mips/cavium-octeon/smp.c💯 warning: Function parameter or member 'cpu' not described in 'octeon_send_ipi_single'
arch/mips/cavium-octeon/smp.c💯 warning: Function parameter or member 'action' not described in 'octeon_send_ipi_single'
arch/mips/cavium-octeon/smp.c💯 warning: expecting prototype for Cause the function described by call_data to be executed on the passed(). Prototype was for octeon_send_ipi_single() instead
arch/mips/cavium-octeon/smp.c:119: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Detect available CPUs, populate cpu_possible_mask
arch/mips/cavium-octeon/smp.c:210: warning: Function parameter or member 'cpu' not described in 'octeon_boot_secondary'
arch/mips/cavium-octeon/smp.c:210: warning: Function parameter or member 'idle' not described in 'octeon_boot_secondary'
arch/mips/cavium-octeon/smp.c:210: warning: expecting prototype for Firmware CPU startup hook(). Prototype was for octeon_boot_secondary() instead
arch/mips/cavium-octeon/smp.c:236: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* After we've done initial boot, this function is called to allow the
arch/mips/cavium-octeon/smp.c:258: warning: Function parameter or member 'max_cpus' not described in 'octeon_prepare_cpus'
arch/mips/cavium-octeon/smp.c:258: warning: expecting prototype for Callout to firmware before smp_init(). Prototype was for octeon_prepare_cpus() instead
arch/mips/cavium-octeon/smp.c:276: warning: expecting prototype for Last chance for the board code to finish SMP initialization before(). Prototype was for octeon_smp_finish() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Remove all kernel-doc notation in arch/mips/cavium-octeon/executive/.
This removes dozens of kernel-doc warnings.
Most of these functions are static and don't need to be documented
with kernel-doc.
The function comments are still present for anyone who wants to read them.
These files are part of the OCTEON SDK so presumably they are documented
there as well.
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:61: warning: Function parameter or member 'addr' not described in 'CVMX_BOOTMEM_NAMED_GET_FIELD'
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:61: warning: Function parameter or member 'field' not described in 'CVMX_BOOTMEM_NAMED_GET_FIELD'
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:61: warning: expecting prototype for This macro returns a member of the(). Prototype was for CVMX_BOOTMEM_NAMED_GET_FIELD() instead
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:77: warning: Function parameter or member 'base' not described in '__cvmx_bootmem_desc_get'
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:77: warning: Function parameter or member 'offset' not described in '__cvmx_bootmem_desc_get'
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:77: warning: Function parameter or member 'size' not described in '__cvmx_bootmem_desc_get'
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:77: warning: expecting prototype for This function is the implementation of the get macros defined(). Prototype was for __cvmx_bootmem_desc_get() instead
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:133: warning: expecting prototype for Allocate a block of memory from the free list that was(). Prototype was for cvmx_bootmem_alloc_range() instead
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:554: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Finds a named memory block by name.
arch/mips/cavium-octeon/executive/cvmx-bootmem.c:661: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Frees a named block.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/cavium-octeon/executive/cvmx-helper-board.c:64: warning: expecting prototype for Return the MII PHY address associated with the given IPD(). Prototype was for cvmx_helper_board_get_mii_address() instead
arch/mips/cavium-octeon/executive/cvmx-helper-board.c:211: warning: expecting prototype for This function is the board specific method of determining an(). Prototype was for __cvmx_helper_board_link_get() instead
arch/mips/cavium-octeon/executive/cvmx-helper-board.c:278: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* This function is called by cvmx_helper_interface_probe() after it
arch/mips/cavium-octeon/executive/cvmx-helper-board.c:324: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Get the clock type used for the USB block based on board type.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/cavium-octeon/executive/cvmx-spi.c:77: warning: expecting prototype for Get current SPI4 initialization callbacks(). Prototype was for cvmx_spi_get_callbacks() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:87: warning: expecting prototype for Set new SPI4 initialization callbacks(). Prototype was for cvmx_spi_set_callbacks() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:92: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Initialize and start the SPI interface.
arch/mips/cavium-octeon/executive/cvmx-spi.c:151: warning: expecting prototype for This routine restarts the SPI interface after it has lost synchronization(). Prototype was for cvmx_spi_restart_interface() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:196: warning: expecting prototype for Callback to perform SPI4 reset(). Prototype was for cvmx_spi_reset_cb() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:313: warning: expecting prototype for Callback to setup calendar and miscellaneous settings before clock detection(). Prototype was for cvmx_spi_calendar_setup_cb() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:431: warning: expecting prototype for Callback to perform clock detection(). Prototype was for cvmx_spi_clock_detect_cb() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:509: warning: expecting prototype for Callback to perform link training(). Prototype was for cvmx_spi_training_cb() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:578: warning: expecting prototype for Callback to perform calendar data synchronization(). Prototype was for cvmx_spi_calendar_sync_cb() instead
arch/mips/cavium-octeon/executive/cvmx-spi.c:634: warning: expecting prototype for Callback to handle interface up(). Prototype was for cvmx_spi_interface_up_cb() instead
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c:67: warning: expecting prototype for Probe a XAUI interface and determine the number of ports(). Prototype was for __cvmx_helper_xaui_probe() instead
arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c:106: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Bringup and enable a XAUI interface. After this call packet
arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c:253: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Return the link state of an IPD/PKO port as returned by
arch/mips/cavium-octeon/executive/cvmx-helper-xaui.c:292: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Configure an IPD/PKO port for the specified link state. This
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/cavium-octeon/executive/cvmx-pko.c:43: warning: Function parameter or member 'interface' not described in '__cvmx_pko_int'
arch/mips/cavium-octeon/executive/cvmx-pko.c:43: warning: Function parameter or member 'index' not described in '__cvmx_pko_int'
arch/mips/cavium-octeon/executive/cvmx-pko.c:43: warning: expecting prototype for Internal state of packet output(). Prototype was for __cvmx_pko_int() instead
arch/mips/cavium-octeon/executive/cvmx-pko.c:186: warning: expecting prototype for Call before any other calls to initialize the packet(). Prototype was for cvmx_pko_initialize_global() instead
arch/mips/cavium-octeon/executive/cvmx-pko.c:241: warning: expecting prototype for This function does per(). Prototype was for cvmx_pko_initialize_local() instead
arch/mips/cavium-octeon/executive/cvmx-pko.c:247: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Enables the packet output hardware. It must already be
arch/mips/cavium-octeon/executive/cvmx-pko.c:270: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Disables the packet output. Does not affect any configuration.
arch/mips/cavium-octeon/executive/cvmx-pko.c:282: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Reset the packet output.
arch/mips/cavium-octeon/executive/cvmx-pko.c:293: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Shutdown and free resources required by packet output.
arch/mips/cavium-octeon/executive/cvmx-pko.c:324: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Configure a output port and the associated queues for use.
arch/mips/cavium-octeon/executive/cvmx-pko.c:555: warning: expecting prototype for Show map of ports(). Prototype was for cvmx_pko_show_queue_map() instead
arch/mips/cavium-octeon/executive/cvmx-pko.c:577: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Rate limit a PKO port to a max packets/sec. This function is only
arch/mips/cavium-octeon/executive/cvmx-pko.c:610: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Rate limit a PKO port to a max bits/sec. This function is only
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c:49: warning: cannot understand function prototype: '__cvmx_cmd_queue_all_state_t *__cvmx_cmd_queue_state_ptr; '
arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c:53: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Initialize the Global queue state pointer.
arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c:101: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Initialize a command queue for use. The initial FPA buffer is
arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c:199: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Shutdown a queue a free it's command buffers to the FPA. The
arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c:235: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Return the number of command words pending in the queue. This
arch/mips/cavium-octeon/executive/cvmx-cmd-queue.c:291: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Return the command buffer to be written to. The purpose of this
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c:53: warning: expecting prototype for Probe RGMII ports and determine the number present(). Prototype was for __cvmx_helper_rgmii_probe() instead
arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c:92: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Put an RGMII interface in loopback mode. Internal packets sent
arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c:135: warning: expecting prototype for Workaround ASX setup errata with CN38XX pass1(). Prototype was for __cvmx_helper_errata_asx_pass1() instead
arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c:152: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Configure all of the ASX, GMX, and PKO registers required
arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c:255: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Return the link state of an IPD/PKO port as returned by
arch/mips/cavium-octeon/executive/cvmx-helper-rgmii.c:284: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Configure an IPD/PKO port for the specified link state. This
--
arch/mips/cavium-octeon/executive/cvmx-l2c.c:768: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Return log base 2 of the number of sets in the L2 cache
arch/mips/cavium-octeon/executive/cvmx-l2c.c:861: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Flush a line from the L2 cache
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
You can use kvm-y instead of kvm-objs to create the composite module.
kvm-$(CONFIG_...) looks cleaner.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
As Documentation/kbuild/makefiles.rst says, EXTRA_CFLAGS is deprecated.
Replace it with ccflags-y.
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Clean up kernel-doc warnings in netlogic/xlr/fmn-config.c by using
correct kernel-doc format. Fixes these warnings:
arch/mips/netlogic/xlr/fmn-config.c:106: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* Configure bucket size and credits for a device. 'size' is the size of
arch/mips/netlogic/xlr/fmn-config.c:181: warning: expecting prototype for Setup the FMN details for each devices according to the device available(). Prototype was for xlr_board_info_setup() instead
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Ganesan Ramalingam <ganesanr@broadcom.com>
Cc: John Crispin <blogic@openwrt.org>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Fix kernel-doc warnings reported by kernel test robot:
arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c:49: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* __cvmx_interrupt_gmxx_rxx_int_en_enable enables all interrupt bits in cvmx_gmxx_rxx_int_en_t
arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c:230: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* __cvmx_interrupt_pcsx_intx_en_reg_enable enables all interrupt bits in cvmx_pcsx_intx_en_reg_t
arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c:271: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* __cvmx_interrupt_pcsxx_int_en_reg_enable enables all interrupt bits in cvmx_pcsxx_int_en_reg_t
arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c:301: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* __cvmx_interrupt_spxx_int_msk_enable enables all interrupt bits in cvmx_spxx_int_msk_t
arch/mips/cavium-octeon/executive/cvmx-interrupt-decodes.c:340: warning: This comment starts with '/**', but isn't a kernel-doc comment. Refer Documentation/doc-guide/kernel-doc.rst
* __cvmx_interrupt_stxx_int_msk_enable enables all interrupt bits in cvmx_stxx_int_msk_t
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Aditya Srivastava <yashsri421@gmail.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Cc: linux-mips@vger.kernel.org
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The config option CAVIUM_RESERVE32 is not used.
Remove the dead code controlled by it.
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
Add JZ4730, JZ4750, JZ4755, JZ4760, JZ4760B, X2000H, and X2100 system
type for cat /proc/cpuinfo to give out JZ4730, JZ4750, JZ4755, JZ4760,
JZ4760B, X2000H, and X2100.
Signed-off-by: 周琰杰 (Zhou Yanjie) <zhouyanjie@wanyeetech.com>
Reviewed-by: Paul Cercueil <paul@crapouillou.net>
Signed-off-by: Thomas Bogendoerfer <tsbogend@alpha.franken.de>
The kernel recovers in due course from missing Mlocked pages: but there
was no point in calling page_mlock() (formerly known as
try_to_munlock()) on a THP, because nothing got done even when it was
found to be mapped in another VM_LOCKED vma.
It's true that we need to be careful: Mlocked accounting of pte-mapped
THPs is too difficult (so consistently avoided); but Mlocked accounting
of only-pmd-mapped THPs is supposed to work, even when multiple mappings
are mlocked and munlocked or munmapped. Refine the tests.
There is already a VM_BUG_ON_PAGE(PageDoubleMap) in page_mlock(), so
page_mlock_one() does not even have to worry about that complication.
(I said the kernel recovers: but would page reclaim be likely to split
THP before rediscovering that it's VM_LOCKED? I've not followed that up)
Fixes: 9a73f61bdb ("thp, mlock: do not mlock PTE-mapped file huge pages")
Signed-off-by: Hugh Dickins <hughd@google.com>
Reviewed-by: Shakeel Butt <shakeelb@google.com>
Acked-by: Kirill A. Shutemov <kirill.shutemov@linux.intel.com>
Link: https://lore.kernel.org/lkml/cfa154c-d595-406-eb7d-eb9df730f944@google.com/
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Alistair Popple <apopple@nvidia.com>
Cc: Jason Gunthorpe <jgg@nvidia.com>
Cc: Ralph Campbell <rcampbell@nvidia.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Yang Shi <shy828301@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull irq fixes from Ingo Molnar:
"Two fixes:
- Fix a MIPS IRQ handling RCU bug
- Remove a DocBook annotation for a parameter that doesn't exist
anymore"
* tag 'irq-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/mips: Fix RCU violation when using irqdomain lookup on interrupt entry
genirq/irqdesc: Drop excess kernel-doc entry @lookup
Pull scheduler fixes from Ingo Molnar:
"Three fixes:
- Fix load tracking bug/inconsistency
- Fix a sporadic CFS bandwidth constraints enforcement bug
- Fix a uclamp utilization tracking bug for newly woken tasks"
* tag 'sched-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/uclamp: Ignore max aggregation if rq is idle
sched/fair: Fix CFS bandwidth hrtimer expiry type
sched/fair: Sync load_sum with load_avg after dequeue
Pull perf fixes from Ingo Molnar:
"A fix and a hardware-enablement addition:
- Robustify uncore_snbep's skx_iio_set_mapping()'s error cleanup
- Add cstate event support for Intel ICELAKE_X and ICELAKE_D"
* tag 'perf-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/intel/uncore: Clean up error handling path of iio mapping
perf/x86/cstate: Add ICELAKE_X and ICELAKE_D support
Pull locking fixes from Ingo Molnar:
- Fix a Sparc crash
- Fix a number of objtool warnings
- Fix /proc/lockdep output on certain configs
- Restore a kprobes fail-safe
* tag 'locking-urgent-2021-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
locking/atomic: sparc: Fix arch_cmpxchg64_local()
kprobe/static_call: Restore missing static_call_text_reserved()
static_call: Fix static_call_text_reserved() vs __init
jump_label: Fix jump_label_text_reserved() vs __init
locking/lockdep: Fix meaningless /proc/lockdep output of lock classes on !CONFIG_PROVE_LOCKING
Pull more SCSI updates from James Bottomley:
"This is a set of minor fixes and clean ups in the core and various
drivers.
The only core change in behaviour is the I/O retry for spinup notify,
but that shouldn't impact anything other than the failing case"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (23 commits)
scsi: virtio_scsi: Add validation for residual bytes from response
scsi: ipr: System crashes when seeing type 20 error
scsi: core: Retry I/O for Notify (Enable Spinup) Required error
scsi: mpi3mr: Fix warnings reported by smatch
scsi: qedf: Add check to synchronize abort and flush
scsi: MAINTAINERS: Add mpi3mr driver maintainers
scsi: libfc: Fix array index out of bound exception
scsi: mvsas: Use DEVICE_ATTR_RO()/RW() macro
scsi: megaraid_mbox: Use DEVICE_ATTR_ADMIN_RO() macro
scsi: qedf: Use DEVICE_ATTR_RO() macro
scsi: qedi: Use DEVICE_ATTR_RO() macro
scsi: message: mptfc: Switch from pci_ to dma_ API
scsi: be2iscsi: Fix some missing space in some messages
scsi: be2iscsi: Fix an error handling path in beiscsi_dev_probe()
scsi: ufs: Fix build warning without CONFIG_PM
scsi: bnx2fc: Remove meaningless bnx2fc_abts_cleanup() return value assignment
scsi: qla2xxx: Add heartbeat check
scsi: virtio_scsi: Do not overwrite SCSI status
scsi: libsas: Add LUN number check in .slave_alloc callback
scsi: core: Inline scsi_mq_alloc_queue()
...
Pull more perf tool updates from Arnaldo Carvalho de Melo:
"New features:
- Enable use of BPF counters with 'perf stat --for-each-cgroup',
using per-CPU 'cgroup-switch' events with an attached BPF program
that does aggregation per-cgroup in the kernel instead of using
per-cgroup perf events.
- Add Topdown metrics L2 events as default events in 'perf stat' for
systems having those events.
Hardware tracing:
- Add a config for max loops without consuming a packet in the Intel
PT packet decoder, set via 'perf config intel-pt.max-loops=N'
Hardware enablement:
- Disable misleading NMI watchdog message in 'perf stat' on hybrid
systems such as Intel Alder Lake.
- Add a dummy event on hybrid systems to collect metadata records.
- Add 24x7 nest metric events for the Power10 platform.
Fixes:
- Fix event parsing for PMUs starting with the same prefix.
- Fix the 'perf trace' 'trace' alias installation dir.
- Fix buffer size to report iregs in perf script python scripts,
supporting the extended registers in PowerPC.
- Fix overflow in elf_sec__is_text().
- Fix 's' on source line when disasm is empty in the annotation TUI,
accessible via 'perf annotate', 'perf report' and 'perf top'.
- Plug leaks in scandir() returned dirent entries in 'perf test' when
sorting the shell tests.
- Fix --task and --stat with pipe input in 'perf report'.
- Fix 'perf probe' use of debuginfo files by build id.
- If a DSO has both dynsym and symtab ELF sections, read from both
when loading the symbol table, fixing a problem processing Fedora
32 glibc DSOs.
Libraries:
- Add grouping of events to libperf, from code in tools/perf,
allowing libperf users to use that mode.
Misc:
- Filter plt stubs from the 'perf probe --functions' output.
- Update UAPI header copies for asound, DRM, mman-common.h and the
ones affected by the quotactl_fd syscall"
* tag 'perf-tools-for-v5.14-2021-07-10' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux: (29 commits)
perf test: Add free() calls for scandir() returned dirent entries
libperf: Add tests for perf_evlist__set_leader()
libperf: Remove BUG_ON() from library code in get_group_fd()
libperf: Add group support to perf_evsel__open()
perf tools: Fix pattern matching for same substring in different PMU type
perf record: Add a dummy event on hybrid systems to collect metadata records
perf stat: Add Topdown metrics L2 events as default events
libperf: Adopt evlist__set_leader() from tools/perf as perf_evlist__set_leader()
libperf: Move 'nr_groups' from tools/perf to evlist::nr_groups
libperf: Move 'leader' from tools/perf to perf_evsel::leader
libperf: Move 'idx' from tools/perf to perf_evsel::idx
libperf: Change tests to single static and shared binaries
perf intel-pt: Add a config for max loops without consuming a packet
perf stat: Disable the NMI watchdog message on hybrid
perf vendor events power10: Adds 24x7 nest metric events for power10 platform
perf script python: Fix buffer size to report iregs in perf script
perf trace: Fix the perf trace link location
perf top: Fix overflow in elf_sec__is_text()
perf annotate: Fix 's' on source line when disasm is empty
perf probe: Do not show @plt function by default
...
Commit dbbee9d5cd ("mm/page_alloc: convert per-cpu list protection to
local_lock") folded in a workaround patch for pahole that was unable to
deal with zero-sized percpu structures.
A superior workaround is achieved with commit a0b8200d06 ("kbuild:
skip per-CPU BTF generation for pahole v1.18-v1.21").
This patch reverts the dummy field and the pahole version check.
Fixes: dbbee9d5cd ("mm/page_alloc: convert per-cpu list protection to local_lock")
Signed-off-by: Mel Gorman <mgorman@techsingularity.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull cifs fixes from Steve French:
"13 cifs/smb3 fixes. Most are to address minor issues pointed out by
Coverity.
Also includes a packet signing enhancement and mount improvement"
* tag '5.14-rc-smb3-fixes-part2' of git://git.samba.org/sfrench/cifs-2.6:
cifs: update internal version number
cifs: prevent NULL deref in cifs_compose_mount_options()
SMB3.1.1: Add support for negotiating signing algorithm
cifs: use helpers when parsing uid/gid mount options and validate them
CIFS: Clarify SMB1 code for POSIX Lock
CIFS: Clarify SMB1 code for rename open file
CIFS: Clarify SMB1 code for delete
CIFS: Clarify SMB1 code for SetFileSize
smb3: fix typo in header file
CIFS: Clarify SMB1 code for UnixSetPathInfo
CIFS: Clarify SMB1 code for UnixCreateSymLink
cifs: clarify SMB1 code for UnixCreateHardLink
cifs: make locking consistent around the server session status
Pull i3c updates from Alexandre Belloni:
- two small fixes to the svc driver
* tag 'i3c/for-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/i3c/linux:
i3c: master: svc: fix doc warning in svc-i3c-master.c
i3c: master: svc: drop free_irq of devm_request_irq allocated irq
Pull thermal updates from Daniel Lezcano:
- Add rk3568 sensor support (Finley Xiao)
- Add missing MODULE_DEVICE_TABLE for the Spreadtrum sensor (Chunyan
Zhang)
- Export additionnal attributes for the int340x thermal processor
(Srinivas Pandruvada)
- Add SC7280 compatible for the tsens driver (Rajeshwari Ravindra
Kamble)
- Fix kernel documentation for thermal_zone_device_unregister() and use
devm_platform_get_and_ioremap_resource() (Yang Yingliang)
- Fix coefficient calculations for the rcar_gen3 sensor driver (Niklas
Söderlund)
- Fix shadowing variable rcar_gen3_ths_tj_1 (Geert Uytterhoeven)
- Add missing of_node_put() for the iMX and Spreadtrum sensors
(Krzysztof Kozlowski)
- Add tegra3 thermal sensor DT bindings (Dmitry Osipenko)
- Stop the thermal zone monitoring when unregistering it to prevent a
temperature update without the 'get_temp' callback (Dmitry Osipenko)
- Add rk3568 DT bindings, convert bindings to yaml schemas and add the
corresponding compatible in the Rockchip sensor (Ezequiel Garcia)
- Add the sc8180x compatible for the Qualcomm tsensor (Bjorn Andersson)
- Use the find_first_zero_bit() function instead of custom code (Andy
Shevchenko)
- Fix the kernel doc for the device cooling device (Yang Li)
- Reorg the processor thermal int340x to set the scene for the PCI mmio
driver (Srinivas Pandruvada)
- Add PCI MMIO driver for the int340x processor thermal driver
(Srinivas Pandruvada)
- Add hwmon sensors for the mediatek sensor (Frank Wunderlich)
- Fix warning for return value reported by Smatch for the int340x
thermal processor (Srinivas Pandruvada)
- Fix wrong register access and decoding for the int340x thermal
processor (Srinivas Pandruvada)
* tag 'thermal-v5.14-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/thermal/linux: (23 commits)
thermal/drivers/int340x/processor_thermal: Fix tcc setting
thermal/drivers/int340x/processor_thermal: Fix warning for return value
thermal/drivers/mediatek: Add sensors-support
thermal/drivers/int340x/processor_thermal: Add PCI MMIO based thermal driver
thermal/drivers/int340x/processor_thermal: Split enumeration and processing part
thermal: devfreq_cooling: Fix kernel-doc
thermal/drivers/intel/intel_soc_dts_iosf: Switch to use find_first_zero_bit()
dt-bindings: thermal: tsens: Add sc8180x compatible
dt-bindings: rockchip-thermal: Support the RK3568 SoC compatible
dt-bindings: thermal: convert rockchip-thermal to json-schema
thermal/core/thermal_of: Stop zone device before unregistering it
dt-bindings: thermal: Add binding for Tegra30 thermal sensor
thermal/drivers/sprd: Add missing of_node_put for loop iteration
thermal/drivers/imx_sc: Add missing of_node_put for loop iteration
thermal/drivers/rcar_gen3_thermal: Do not shadow rcar_gen3_ths_tj_1
thermal/drivers/rcar_gen3_thermal: Fix coefficient calculations
thermal/drivers/st: Use devm_platform_get_and_ioremap_resource()
thermal/core: Correct function name thermal_zone_device_unregister()
dt-bindings: thermal: tsens: Add compatible string to TSENS binding for SC7280
thermal/drivers/int340x: processor_thermal: Export additional attributes
...
Pull Kbuild updates from Masahiro Yamada:
- Increase the -falign-functions alignment for the debug option.
- Remove ugly libelf checks from the top Makefile.
- Make the silent build (-s) more silent.
- Re-compile the kernel if KBUILD_BUILD_TIMESTAMP is specified.
- Various script cleanups
* tag 'kbuild-v5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (27 commits)
scripts: add generic syscallnr.sh
scripts: check duplicated syscall number in syscall table
sparc: syscalls: use pattern rules to generate syscall headers
parisc: syscalls: use pattern rules to generate syscall headers
nds32: add arch/nds32/boot/.gitignore
kbuild: mkcompile_h: consider timestamp if KBUILD_BUILD_TIMESTAMP is set
kbuild: modpost: Explicitly warn about unprototyped symbols
kbuild: remove trailing slashes from $(KBUILD_EXTMOD)
kconfig.h: explain IS_MODULE(), IS_ENABLED()
kconfig: constify long_opts
scripts/setlocalversion: simplify the short version part
scripts/setlocalversion: factor out 12-chars hash construction
scripts/setlocalversion: add more comments to -dirty flag detection
scripts/setlocalversion: remove workaround for old make-kpkg
scripts/setlocalversion: remove mercurial, svn and git-svn supports
kbuild: clean up ${quiet} checks in shell scripts
kbuild: sink stdout from cmd for silent build
init: use $(call cmd,) for generating include/generated/compile.h
kbuild: merge scripts/mkmakefile to top Makefile
sh: move core-y in arch/sh/Makefile to arch/sh/Kbuild
...
Pull more s390 updates from Vasily Gorbik:
- Fix preempt_count initialization.
- Rework call_on_stack() macro to add proper type handling and avoid
possible register corruption.
- More error prone "register asm" removal and fixes.
- Fix syscall restarting when multiple signals are coming in. This adds
minimalistic trampolines to vdso so we can return from signal without
using the stack which requires pgm check handler hacks when NX is
enabled.
- Remove HAVE_IRQ_EXIT_ON_IRQ_STACK since this is no longer true after
switch to generic entry.
- Fix protected virtualization secure storage access exception
handling.
- Make machine check C handler always enter with DAT enabled and move
register validation to C code.
- Fix tinyconfig boot problem by avoiding MONITOR CALL without
CONFIG_BUG.
- Increase asm symbols alignment to 16 to make it consistent with
compilers.
- Enable concurrent access to the CPU Measurement Counter Facility.
- Add support for dynamic AP bus size limit and rework ap_dqap to deal
with messages greater than recv buffer.
* tag 's390-5.14-2' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux: (41 commits)
s390: preempt: Fix preempt_count initialization
s390/linkage: increase asm symbols alignment to 16
s390: rename CALL_ON_STACK_NORETURN() to call_on_stack_noreturn()
s390: add type checking to CALL_ON_STACK_NORETURN() macro
s390: remove old CALL_ON_STACK() macro
s390/softirq: use call_on_stack() macro
s390/lib: use call_on_stack() macro
s390/smp: use call_on_stack() macro
s390/kexec: use call_on_stack() macro
s390/irq: use call_on_stack() macro
s390/mm: use call_on_stack() macro
s390: introduce proper type handling call_on_stack() macro
s390/irq: simplify on_async_stack()
s390/irq: inline do_softirq_own_stack()
s390/irq: simplify do_softirq_own_stack()
s390/ap: get rid of register asm in ap_dqap()
s390: rename PIF_SYSCALL_RESTART to PIF_EXECVE_PGSTE_RESTART
s390: move restart of execve() syscall
s390/signal: remove sigreturn on stack
s390/signal: switch to using vdso for sigreturn and syscall restart
...
Pull MIPS fixes from Thomas Bogendoerfer:
- fix for accesing gic via vdso
- two build fixes
* tag 'mips_5.14_1' of git://git.kernel.org/pub/scm/linux/kernel/git/mips/linux:
MIPS: vdso: Invalid GIC access through VDSO
mips: disable branch profiling in boot/decompress.o
mips: always link byteswap helpers into decompressor
Pull ARM defconfig updates from "Olof Johansson
"A set of defconfig changes, we keep them in a separate branch to avoid
conflicts between topics by separating them out.
These changes are almost exclusively turning on new drivers for
various platforms, or turning on modules for new drivers for the
shared generic configs"
* tag 'arm-defconfig-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (22 commits)
arm64: defconfig: Enable renesas usb xhci pci host controller
arm64: defconfig: Visconti: Enable GPIO
arm64: defconfig: Visconti: Enable PWM
arm64: defconfig: add drivers needed for DragonBoard410c
ARM: config: aspeed: Add DEBUG_FS and EXT4
ARM: ixp4xx_defconfig: add MTD_PHYSMAP
ARM: ixp4xx_defconfig: add CONFIG_SERIAL_OF_PLATFORM
ARM: imx_v6_v7_defconfig: Select the Wifi ath10k sdio driver
ARM: exynos_defconfig: restore framebuffer support
arm64: defconfig: Enable ARCH_R9A07G044
ARM: configs: at91_dt_defconfig: configs for sam9x60
arm64: defconfig: Enable Exynos UFS driver
arm64: defconfig: qcom: enable interconnect for SM8350
ARM: tegra_defconfig: Enable CONFIG_DEVFREQ_THERMAL
arm64: defconfig: Enable usb2_clksel for R-Car Gen3 and RZ/G2
arm64: defconfig: enable Layerscape EDAC driver
ARM: omap2plus_defconfig: Add LP5523 LED driver
ARM: omap2plus_defconfig: Add WL1251 and WEXT modules
ARM: shmobile: defconfig: Refresh for v5.13-rc1
arm64: defconfig: Allow Mediatek boards to boot from the mmc
...
Pull ARM driver updates from Olof Johansson:
- Reset controllers: Adding support for Microchip Sparx5 Switch.
- Memory controllers: ARM Primecell PL35x SMC memory controller driver
cleanups and improvements.
- i.MX SoC drivers: Power domain support for i.MX8MM and i.MX8MN.
- Rockchip: RK3568 power domains support + DT binding updates,
cleanups.
- Qualcomm SoC drivers: Amend socinfo with more SoC/PMIC details,
including support for MSM8226, MDM9607, SM6125 and SC8180X.
- ARM FFA driver: "Firmware Framework for ARMv8-A", defining management
interfaces and communication (including bus model) between partitions
both in Normal and Secure Worlds.
- Tegra Memory controller changes, including major rework to deal with
identity mappings at boot and integration with ARM SMMU pieces.
* tag 'arm-drivers-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (120 commits)
firmware: turris-mox-rwtm: add marvell,armada-3700-rwtm-firmware compatible string
firmware: turris-mox-rwtm: show message about HWRNG registration
firmware: turris-mox-rwtm: fail probing when firmware does not support hwrng
firmware: turris-mox-rwtm: report failures better
firmware: turris-mox-rwtm: fix reply status decoding function
soc: imx: gpcv2: add support for i.MX8MN power domains
dt-bindings: add defines for i.MX8MN power domains
firmware: tegra: bpmp: Fix Tegra234-only builds
iommu/arm-smmu: Use Tegra implementation on Tegra186
iommu/arm-smmu: tegra: Implement SID override programming
iommu/arm-smmu: tegra: Detect number of instances at runtime
dt-bindings: arm-smmu: Add Tegra186 compatible string
firmware: qcom_scm: Add MDM9607 compatible
soc: qcom: rpmpd: Add MDM9607 RPM Power Domains
soc: renesas: Add support to read LSI DEVID register of RZ/G2{L,LC} SoC's
soc: renesas: Add ARCH_R9A07G044 for the new RZ/G2L SoC's
dt-bindings: soc: rockchip: drop unnecessary #phy-cells from grf.yaml
memory: emif: remove unused frequency and voltage notifiers
memory: fsl_ifc: fix leak of private memory on probe failure
memory: fsl_ifc: fix leak of IO mapping on probe failure
...
Pull ARM devicetree updates from Olof Johansson:
"Like always, the DT branch is sizable. There are numerous additions
and fixes to existing platforms, but also a handful of new ones
introduced. Less than some other releases, but there's been
significant work on cleanups, refactorings and device enabling on
existing platforms.
A non-exhaustive list of new material:
- Refactoring of BCM2711 dtsi structure to add support for the
Raspberry Pi 400
- Rockchip: RK3568 SoC and EVB, video codecs for
rk3036/3066/3188/322x
- Qualcomm: SA8155p Automotive platform (SM8150 derivative),
SM8150/8250 enhancements and support for Sony Xperia 1/1II and
5/5II
- TI K3: PCI/USB3 support on AM64-sk boards, R5 remoteproc
definitions
- TI OMAP: Various cleanups
- Tegra: Audio support for Jetson Xavier NX, SMMU support on Tegra194
- Qualcomm: lots of additions for peripherals across several SoCs,
and new support for Microsoft Surface Duo (SM8150-based), Huawei
Ascend G7.
- i.MX: Numerous additions of features across SoCs and boards.
- Allwinner: More device bindings for V3s, Forlinx OKA40i-C and
NanoPi R1S H5 boards
- MediaTek: More device bindings for mt8167, new Chromebook system
variants for mt8183
- Renesas: RZ/G2L SoC and EVK added
- Amlogic: BananaPi BPI-M5 board added"
* tag 'arm-dt-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (511 commits)
arm64: dts: rockchip: add basic dts for RK3568 EVB
arm64: dts: rockchip: add core dtsi for RK3568 SoC
arm64: dts: rockchip: add generic pinconfig settings used by most Rockchip socs
ARM: dts: rockchip: add vpu and vdec node for RK322x
ARM: dts: rockchip: add vpu nodes for RK3066 and RK3188
ARM: dts: rockchip: add vpu node for RK3036
arm64: dts: ipq8074: Add QUP6 I2C node
arm64: dts: rockchip: Re-add regulator-always-on for vcc_sdio for rk3399-roc-pc
arm64: dts: rockchip: Re-add regulator-boot-on, regulator-always-on for vdd_gpu on rk3399-roc-pc
arm64: dts: rockchip: add ir-receiver for rk3399-roc-pc
arm64: dts: rockchip: Add USB-C port details for rk3399 Firefly
arm64: dts: rockchip: Sort rk3399 firefly pinmux entries
arm64: dts: rockchip: add infrared receiver node to RK3399 Firefly
arm64: dts: rockchip: add SPDIF node for rk3399-firefly
arm64: dts: rockchip: Add Rotation Property for OGA Panel
arm64: dts: qcom: sc7180: bus votes for eMMC and SD card
arm64: dts: qcom: sm8250-edo: Add Samsung touchscreen
arm64: dts: qcom: sm8250-edo: Enable GPI DMA
arm64: dts: qcom: sm8250-edo: Enable ADSP/CDSP/SLPI
arm64: dts: qcom: sm8250-edo: Enable PCIe
...
Pull ARM SoC updates from Olof Johansson:
"A few SoC (code) changes have queued up this cycle, mostly for minor
changes and some refactoring and cleanup of legacy platforms. This
branch also contains a few of the fixes that weren't sent in by the
end of the release (all fairly minor).
- Adding an additional maintainer for the TEE subsystem (Sumit Garg)
- Quite a significant modernization of the IXP4xx platforms by Linus
Walleij, revisiting with a new PCI host driver/binding, removing
legacy mach/* include dependencies and moving platform
detection/config to drivers/soc. Also some updates/cleanup of
platform data.
- Core power domain support for Tegra platforms, and some
improvements in build test coverage by adding stubs for compile
test targets.
- A handful of updates to i.MX platforms, adding legacy (non-PSCI)
SMP support on i.MX7D, SoC ID setup for i.MX50, removal of platform
data and board fixups for iMX6/7.
... and a few smaller changes and fixes for Samsung, OMAP, Allwinner,
Rockchip"
* tag 'arm-soc-5.14' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (53 commits)
MAINTAINERS: Add myself as TEE subsystem reviewer
ixp4xx: fix spelling mistake in Kconfig "Devce" -> "Device"
hw_random: ixp4xx: Add OF support
hw_random: ixp4xx: Add DT bindings
hw_random: ixp4xx: Turn into a module
hw_random: ixp4xx: Use SPDX license tag
hw_random: ixp4xx: enable compile-testing
pata: ixp4xx: split platform data to its own header
soc: ixp4xx: move cpu detection to linux/soc/ixp4xx/cpu.h
PCI: ixp4xx: Add a new driver for IXP4xx
PCI: ixp4xx: Add device tree bindings for IXP4xx
ARM/ixp4xx: Make NEED_MACH_IO_H optional
ARM/ixp4xx: Move the virtual IObases
MAINTAINERS: ARM/MStar/Sigmastar SoCs: Add a link to the MStar tree
ARM: debug: add UART early console support for MSTAR SoCs
ARM: dts: ux500: Fix LED probing
ARM: imx: add smp support for imx7d
ARM: imx6q: drop of_platform_default_populate() from init_machine
arm64: dts: rockchip: Update RK3399 PCI host bridge window to 32-bit address memory
soc/tegra: fuse: Fix Tegra234-only builds
...
Pull memblock fix from Mike Rapoport:
"This is a fix for the rework of ARM's pfn_valid() implementation
merged during this merge window.
Don't abuse pfn_valid() to check if pfn is in RAM
The semantics of pfn_valid() is to check presence of the memory map
for a PFN and not whether a PFN is in RAM. The memory map may be
present for a hole in the physical memory and if such hole corresponds
to an MMIO range, __arm_ioremap_pfn_caller() will produce a WARN() and
fail.
Use memblock_is_map_memory() instead of pfn_valid() to check if a PFN
is in RAM or not"
* tag 'fixes-2021-07-09' of git://git.kernel.org/pub/scm/linux/kernel/git/rppt/memblock:
arm: ioremap: don't abuse pfn_valid() to check if pfn is in RAM
Pull percpu fix from Dennis Zhou:
"This is just a single change to fix percpu depopulation. The code
relied on depopulation code written specifically for the free path and
relied on vmalloc to do the tlb flush lazily. As we're modifying the
backing pages during the lifetime of a chunk, we need to also flush
the tlb accordingly.
Guenter Roeck reported this issue in [1] on mips. I believe we just
happen to be lucky given the much larger chunk sizes on x86 and
consequently less churning of this memory"
Link: https://lore.kernel.org/lkml/20210702191140.GA3166599@roeck-us.net/ [1]
* 'for-5.14-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/dennis/percpu:
percpu: flush tlb in pcpu_reclaim_populated()
commit 03623b4b04 ("rtc: pcf2127: add tamper detection support")
added support for timestamp interrupts. However they are not being
handled in the irq handler. If a timestamp interrupt occurs it
results in kernel disabling the interrupt and displaying the call
trace:
[ 121.145580] irq 78: nobody cared (try booting with the "irqpoll" option)
...
[ 121.238087] [<00000000c4d69393>] irq_default_primary_handler threaded [<000000000a90d25b>] pcf2127_rtc_irq [rtc_pcf2127]
[ 121.248971] Disabling IRQ #78
Handle timestamp interrupts in pcf2127_rtc_irq(). Save time stamp
before clearing TSF1 and TSF2 flags so that it can't be overwritten.
Set a flag to mark if the timestamp is valid and only report to sysfs
if the flag is set. To mimic the hardware behavior, don’t save
another timestamp until the first one has been read by the userspace.
However, if the alarm irq is not configured, keep the old way of
handling timestamp interrupt in the timestamp0 sysfs calls.
Signed-off-by: Mian Yousaf Kaukab <ykaukab@suse.de>
Reviewed-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Tested-by: Bruno Thomsen <bruno.thomsen@gmail.com>
Signed-off-by: Alexandre Belloni <alexandre.belloni@bootlin.com>
Link: https://lore.kernel.org/r/20210629150643.31551-1-ykaukab@suse.de
