kbuf imports have the front offset adjusted and segments removed, but
the tail segments are still included in the segment count that gets
passed in the iov_iter. As the segments aren't necessarily all the
same size, move importing to a separate helper and iterate the
mapped length to get an exact count.
Reviewed-by: Nitesh Shetty <nj.shetty@samsung.com>
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Sending exact nr_segs, avoids bio split check and processing in
block layer, which takes around 5%[1] of overall CPU utilization.
In our setup, we see overall improvement of IOPS from 7.15M to 7.65M [2]
and 5% less CPU utilization.
[1]
3.52% io_uring [kernel.kallsyms] [k] bio_split_rw_at
1.42% io_uring [kernel.kallsyms] [k] bio_split_rw
0.62% io_uring [kernel.kallsyms] [k] bio_submit_split
[2]
sudo taskset -c 0,1 ./t/io_uring -b512 -d128 -c32 -s32 -p1 -F1 -B1 -n2
-r4 /dev/nvme0n1 /dev/nvme1n1
Signed-off-by: Nitesh Shetty <nj.shetty@samsung.com>
[Pavel: fixed for kbuf, rebased and reworked on top of cleanups]
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/7a1a49a8d053bd617c244291d63dbfbc07afde36.1744882081.git.asml.silence@gmail.com
[axboe: fold in fix factoring in buf reg offset]
Signed-off-by: Jens Axboe <axboe@kernel.dk>
IORING_OP_RECV_ZC requests take a zcrx object id via sqe::zcrx_ifq_idx,
which binds it to the corresponding if / queue. However, we don't return
that id back to the user. It's fine as currently there can be only one
zcrx and the user assumes that its id should be 0, but as we'll need
multiple zcrx objects in the future let's explicitly pass it back on
registration.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/8714667d370651962f7d1a169032e5f02682a73e.1744722517.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Refill queue lock and other bits are only used from the allocation path
on the rx softirq side, but it shares the cache line with other fields
like ctx that are used also in the "syscall" path, which causes cache
bouncing when softirq runs on a different CPU.
Separate them into different cache lines. The first one now contains
constant fields used by both contextx, followed by a line responsible
for refill queue data.
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/6d1f598e27d623c07fc49d6baee13089a9b1216c.1743848241.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull dcache fixes from Al Viro:
"Fixes for bugs caught as part of tree-in-dcache work.
Mostly dentry refcount mishandling"
* tag 'pull-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
hypfs_create_cpu_files(): add missing check for hypfs_mkdir() failure
qibfs: fix _another_ leak
spufs: fix a leak in spufs_create_context()
spufs: fix gang directory lifetimes
spufs: fix a leak on spufs_new_file() failure
Pull smb server fixes from Steve French:
"Four ksmbd SMB3 server fixes, all also for stable"
* tag 'v6.15rc-part2-ksmbd-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: fix null pointer dereference in alloc_preauth_hash()
ksmbd: validate zero num_subauth before sub_auth is accessed
ksmbd: fix overflow in dacloffset bounds check
ksmbd: fix session use-after-free in multichannel connection
Pull ring-buffer updates from Steven Rostedt:
"Persistent buffer cleanups and simplifications.
It was mistaken that the physical memory returned from "reserve_mem"
had to be vmap()'d to get to it from a virtual address. But
reserve_mem already maps the memory to the virtual address of the
kernel so a simple phys_to_virt() can be used to get to the virtual
address from the physical memory returned by "reserve_mem". With this
new found knowledge, the code can be cleaned up and simplified.
- Enforce that the persistent memory is page aligned
As the buffers using the persistent memory are all going to be
mapped via pages, make sure that the memory given to the tracing
infrastructure is page aligned. If it is not, it will print a
warning and fail to map the buffer.
- Use phys_to_virt() to get the virtual address from reserve_mem
Instead of calling vmap() on the physical memory returned from
"reserve_mem", use phys_to_virt() instead.
As the memory returned by "memmap" or any other means where a
physical address is given to the tracing infrastructure, it still
needs to be vmap(). Since this memory can never be returned back to
the buddy allocator nor should it ever be memmory mapped to user
space, flag this buffer and up the ref count. The ref count will
keep it from ever being freed, and the flag will prevent it from
ever being memory mapped to user space.
- Use vmap_page_range() for memmap virtual address mapping
For the memmap buffer, instead of allocating an array of struct
pages, assigning them to the contiguous phsycial memory and then
passing that to vmap(), use vmap_page_range() instead
- Replace flush_dcache_folio() with flush_kernel_vmap_range()
Instead of calling virt_to_folio() and passing that to
flush_dcache_folio(), just call flush_kernel_vmap_range() directly.
This also fixes a bug where if a subbuffer was bigger than
PAGE_SIZE only the PAGE_SIZE portion would be flushed"
* tag 'trace-ringbuffer-v6.15-3' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
ring-buffer: Use flush_kernel_vmap_range() over flush_dcache_folio()
tracing: Use vmap_page_range() to map memmap ring buffer
tracing: Have reserve_mem use phys_to_virt() and separate from memmap buffer
tracing: Enforce the persistent ring buffer to be page aligned
Pull more io_uring updates from Jens Axboe:
"Set of fixes/updates for io_uring that should go into this release.
The ublk bits could've gone via either tree - usually I put them in
block, but they got a bit mixed this series with the zero-copy
supported that ended up dipping into both trees.
This contains:
- Fix for sendmsg zc, include in pinned pages accounting like we do
for the other zc types
- Series for ublk fixing request aborting, doing various little
cleanups, fixing some zc issues, and adding queue_rqs support
- Another ublk series doing some code cleanups
- Series cleaning up the io_uring send path, mostly in preparation
for registered buffers
- Series doing little MSG_RING cleanups
- Fix for the newly added zc rx, fixing len being 0 for the last
invocation of the callback
- Add vectored registered buffer support for ublk. With that, then
ublk also supports this feature in the kernel revision where it
could generically introduced for rw/net
- A bunch of selftest additions for ublk. This is the majority of the
diffstat
- Silence a KCSAN data race warning for io-wq
- Various little cleanups and fixes"
* tag 'io_uring-6.15-20250403' of git://git.kernel.dk/linux: (44 commits)
io_uring: always do atomic put from iowq
selftests: ublk: enable zero copy for stripe target
io_uring: support vectored kernel fixed buffer
block: add for_each_mp_bvec()
io_uring: add validate_fixed_range() for validate fixed buffer
selftests: ublk: kublk: fix an error log line
selftests: ublk: kublk: use ioctl-encoded opcodes
io_uring/zcrx: return early from io_zcrx_recv_skb if readlen is 0
io_uring/net: avoid import_ubuf for regvec send
io_uring/rsrc: check size when importing reg buffer
io_uring: cleanup {g,s]etsockopt sqe reading
io_uring: hide caches sqes from drivers
io_uring: make zcrx depend on CONFIG_IO_URING
io_uring: add req flag invariant build assertion
Documentation: ublk: remove dead footnote
selftests: ublk: specify io_cmd_buf pointer type
ublk: specify io_cmd_buf pointer type
io_uring: don't pass ctx to tw add remote helper
io_uring/msg: initialise msg request opcode
io_uring/msg: rename io_double_lock_ctx()
...
Pull more bcachefs updates from Kent Overstreet:
"More notable fixes:
- Fix for striping behaviour on tiering filesystems where replicas
exceeds durability on destination target
- Fix a race in device removal where deleting alloc info races with
the discard worker
- Some small stack usage improvements: this is just enough for KMSAN
builds to not blow the stack, more is queued up for 6.16"
* tag 'bcachefs-2025-04-03' of git://evilpiepirate.org/bcachefs:
bcachefs: Fix "journal stuck" during recovery
bcachefs: backpointer_get_key: check for null from peek_slot()
bcachefs: Fix null ptr deref in invalidate_one_bucket()
bcachefs: Fix check_snapshot_exists() restart handling
bcachefs: use nonblocking variant of print_string_as_lines in error path
bcachefs: Fix scheduling while atomic from logging changes
bcachefs: Add error handling for zlib_deflateInit2()
bcachefs: add missing selection of XARRAY_MULTI
bcachefs: bch_dev_usage_full
bcachefs: Kill btree_iter.trans
bcachefs: do_trace_key_cache_fill()
bcachefs: Split up bch_dev.io_ref
bcachefs: fix ref leak in btree_node_read_all_replicas
bcachefs: Fix null ptr deref in bch2_write_endio()
bcachefs: Fix field spanning write warning
bcachefs: Fix striping behaviour
Pull 9p updates from Dominique Martinet:
- fix handling of bogus (negative/too long) replies
- fix crash on mkdir with ACLs (... looks like nobody is using ACLs
with semi-recent kernels...)
- ipv6 support for trans=tcp
- minor concurrency fix to make syzbot happy
- minor cleanup
* tag '9p-for-6.15-rc1' of https://github.com/martinetd/linux:
docs: fs/9p: Add missing "not" in cache documentation
9p: Use hashtable.h for hash_errmap
Documentation/fs/9p: fix broken link
9p/trans_fd: mark concurrent read and writes to p9_conn->err
9p/net: return error on bogus (longer than requested) replies
9p/net: fix improper handling of bogus negative read/write replies
fs/9p: fix NULL pointer dereference on mkdir
net/9p/fd: support ipv6 for trans=tcp
Pull RTC updates from Alexandre Belloni:
"We see a net reduction of the number of lines of code thanks to the
removal of a now unused driver and a testing tool that is not used
anymore. Apart from this, the max31335 driver gets support for a new
part number and pm8xxx gets UEFI support.
Core:
- setdate is removed as it has better replacements
- skip alarms with a second resolution when we know the RTC doesn't
support those.
Subsystem:
- remove unnecessary private struct members
- use devm_pm_set_wake_irq were relevant
Drivers:
- ds1307: stop disabling alarms on probe for DS1337, DS1339, DS1341
and DS3231
- max31335: add max31331 support
- pcf50633 is removed as support for the related SoC has been removed
- pcf85063: properly handle POR failures"
* tag 'rtc-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (50 commits)
rtc: remove 'setdate' test program
selftest: rtc: skip some tests if the alarm only supports minutes
rtc: mt6397: drop unused defines
rtc: pcf85063: replace dev_err+return with return dev_err_probe
rtc: pcf85063: do a SW reset if POR failed
rtc: max31335: Add driver support for max31331
dt-bindings: rtc: max31335: Add max31331 support
rtc: cros-ec: Avoid a couple of -Wflex-array-member-not-at-end warnings
dt-bindings: rtc: pcf2127: Reference spi-peripheral-props.yaml
rtc: rzn1: implement one-second accuracy for alarms
rtc: pcf50633: Remove
rtc: pm8xxx: implement qcom,no-alarm flag for non-HLOS owned alarm
rtc: pm8xxx: mitigate flash wear
rtc: pm8xxx: add support for uefi offset
dt-bindings: rtc: qcom-pm8xxx: document qcom,no-alarm flag
rtc: rv3032: drop WADA
rtc: rv3032: fix EERD location
rtc: pm8xxx: switch to devm_device_init_wakeup
rtc: pm8xxx: fix possible race condition
rtc: mpfs: switch to devm_device_init_wakeup
...
Pull ARM and clkdev updates from Russell King:
- Simplify ARM_MMU_KEEP usage
- Add Rust support for ARM architecture version 7
- Align IPIs reported in /proc/interrupts
- require linker to support KEEP within OVERLAY
- add KEEP() for ARM vectors
- add __printf() attribute for clkdev functions
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rmk/linux:
ARM: 9445/1: clkdev: Mark some functions with __printf() attribute
ARM: 9444/1: add KEEP() keyword to ARM_VECTORS
ARM: 9443/1: Require linker to support KEEP within OVERLAY for DCE
ARM: 9442/1: smp: Fix IPI alignment in /proc/interrupts
ARM: 9441/1: rust: Enable Rust support for ARMv7
ARM: 9439/1: arm32: simplify ARM_MMU_KEEP usage
Pull arm64 fixes from Catalin Marinas:
- Fix max_pfn calculation when hotplugging memory so that it never
decreases
- Fix dereference of unused source register in the MOPS SET operation
fault handling
- Fix NULL calling in do_compat_alignment_fixup() when the 32-bit user
space does an unaligned LDREX/STREX
- Add the HiSilicon HIP09 processor to the Spectre-BHB affected CPUs
- Drop unused code pud accessors (special/mkspecial)
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: Don't call NULL in do_compat_alignment_fixup()
arm64: Add support for HIP09 Spectre-BHB mitigation
arm64: mm: Drop dead code for pud special bit handling
arm64: mops: Do not dereference src reg for a set operation
arm64: mm: Correct the update of max_pfn
Pull bpf fixes from Alexei Starovoitov:
- Fix BPF selftests expectations of assembler output and struct layout
(Song Liu and Yonghong Song)
- Fix XSK error code when queue is full (Wang Liang)
* tag 'bpf-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
selftests/bpf: Fix verifier_private_stack test failure
selftests/bpf: Fix verifier_bpf_fastcall test
selftests/bpf: Fix tests after fields reorder in struct file
xsk: Fix __xsk_generic_xmit() error code when cq is full
Pull more non-MM updates from Andrew Morton:
"One bugfix and a couple of small late-arriving updates"
* tag 'mm-nonmm-stable-2025-04-02-22-12' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
lib: scatterlist: fix sg_split_phys to preserve original scatterlist offsets
lib/sort.c: add _nonatomic() variants with cond_resched()
mailmap: add an entry for Nicolas Schier
Pull more MM updates from Andrew Morton:
- The series "mm: fixes for fallouts from mem_init() cleanup" from Mike
Rapoport fixes a couple of issues with the just-merged "arch, mm:
reduce code duplication in mem_init()" series
- The series "MAINTAINERS: add my isub-entries to MM part." from Mike
Rapoport does some maintenance on MAINTAINERS
- The series "remove tlb_remove_page_ptdesc()" from Qi Zheng does some
cleanup work to the page mapping code
- The series "mseal system mappings" from Jeff Xu permits sealing of
"system mappings", such as vdso, vvar, vvar_vclock, vectors (arm
compat-mode), sigpage (arm compat-mode)
- Plus the usual shower of singleton patches
* tag 'mm-stable-2025-04-02-22-07' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm: (31 commits)
mseal sysmap: add arch-support txt
mseal sysmap: enable s390
selftest: test system mappings are sealed
mseal sysmap: update mseal.rst
mseal sysmap: uprobe mapping
mseal sysmap: enable arm64
mseal sysmap: enable x86-64
mseal sysmap: generic vdso vvar mapping
selftests: x86: test_mremap_vdso: skip if vdso is msealed
mseal sysmap: kernel config and header change
mm: pgtable: remove tlb_remove_page_ptdesc()
x86: pgtable: convert to use tlb_remove_ptdesc()
riscv: pgtable: unconditionally use tlb_remove_ptdesc()
mm: pgtable: convert some architectures to use tlb_remove_ptdesc()
mm: pgtable: change pt parameter of tlb_remove_ptdesc() to struct ptdesc*
mm: pgtable: make generic tlb_remove_table() use struct ptdesc
microblaze/mm: put mm_cmdline_setup() in .init.text section
mm/memory_hotplug: fix call folio_test_large with tail page in do_migrate_range
MAINTAINERS: mm: add entry for secretmem
MAINTAINERS: mm: add entry for numa memblocks and numa emulation
...
Pull MM hotfixes from Andrew Morton:
"Five hotfixes. Three are cc:stable and the remainder address post-6.14
issues or aren't considered necessary for -stable kernels.
All patches are for MM"
* tag 'mm-hotfixes-stable-2025-04-02-21-57' of git://git.kernel.org/pub/scm/linux/kernel/git/akpm/mm:
mm: zswap: fix crypto_free_acomp() deadlock in zswap_cpu_comp_dead()
mm/hugetlb: move hugetlb_sysctl_init() to the __init section
mm: page_isolation: avoid calling folio_hstate() without hugetlb_lock
mm/hugetlb_vmemmap: fix memory loads ordering
mm/userfaultfd: fix release hang over concurrent GUP
Pull sched_ext fixes from Tejun Heo:
- Calling scx_bpf_create_dsq() with the same ID would succeed creating
duplicate DSQs. Fix it to return -EEXIST.
- scx_select_cpu_dfl() fixes and cleanups.
- Synchronize tool/sched_ext with external scheduler repo. While this
isn't a fix. There's no risk to the kernel and it's better if they
stay synced closer.
* tag 'sched_ext-for-6.15-rc0-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/sched_ext:
tools/sched_ext: Sync with scx repo
sched_ext: initialize built-in idle state before ops.init()
sched_ext: create_dsq: Return -EEXIST on duplicate request
sched_ext: Remove a meaningless conditional goto in scx_select_cpu_dfl()
sched_ext: idle: Fix return code of scx_select_cpu_dfl()
Pull tracing fixes from Steven Rostedt:
- Fix build error when CONFIG_PROBE_EVENTS_BTF_ARGS is not enabled
The tracing of arguments in the function tracer depends on some
functions that are only defined when PROBE_EVENTS_BTF_ARGS is
enabled. In fact, PROBE_EVENTS_BTF_ARGS also depends on all the same
configs as the function argument tracing requires. Just have the
function argument tracing depend on PROBE_EVENTS_BTF_ARGS.
- Free module_delta for persistent ring buffer instance
When an instance holds the persistent ring buffer, it allocates a
helper array to hold the deltas between where modules are loaded on
the last boot and the current boot. This array needs to be freed when
the instance is freed.
- Add cond_resched() to loop in ftrace_graph_set_hash()
The hash functions in ftrace loop over every function that can be
enabled by ftrace. This can be 50,000 functions or more. This loop is
known to trigger soft lockup warnings and requires a cond_resched().
The loop in ftrace_graph_set_hash() was missing it.
- Fix the event format verifier to include "%*p.." arguments
To prevent events from dereferencing stale pointers that can happen
if a trace event uses a dereferece pointer to something that was not
copied into the ring buffer and can be freed by the time the trace is
read, a verifier is called. At boot or module load, the verifier
scans the print format string for pointers that can be dereferenced
and it checks the arguments to make sure they do not contain
something that can be freed. The "%*p" was not handled, which would
add another argument and cause the verifier to not only not verify
this pointer, but it will look at the wrong argument for every
pointer after that.
- Fix mcount sorttable building for different endian type target
When modifying the ELF file to sort the mcount_loc table in the
sorttable.c code, the endianess of the file and the host is used to
determine if the bytes need to be swapped when calculations are done.
A change was made to the sorting of the mcount_loc that read the
values from the ELF file into an array and the swap happened on the
filling of the array. But one of the calculations of the array still
did the swap when it did not need to. This caused building on a
little endian machine for a big endian target to not find the mcount
function in the 'nm' table and it zeroed it out, causing there to be
no functions available to trace.
- Add goto out_unlock jump to rv_register_monitor() on error path
One of the error paths in rv_register_monitor() just returned the
error when it should have jumped to the out_unlock label to release
the mutex.
* tag 'trace-v6.15-2' of git://git.kernel.org/pub/scm/linux/kernel/git/trace/linux-trace:
rv: Fix missing unlock on double nested monitors return path
scripts/sorttable: Fix endianness handling in build-time mcount sort
tracing: Verify event formats that have "%*p.."
ftrace: Add cond_resched() to ftrace_graph_set_hash()
tracing: Free module_delta on freeing of persistent ring buffer
ftrace: Have tracing function args depend on PROBE_EVENTS_BTF_ARGS
If we crash when the journal pin fifo is completely full - i.e. we're
at the maximum number of dirty journal entries - that may put us in a
sticky situation in recovery, as journal replay will need to be able to
open new journal entries in order to get going.
bch2_fs_journal_start() already had provisions for resizing the journal
pin fifo if needed, but it needs a fudge factor to ensure there's room
for journal replay.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
peek_slot() doesn't normally return bkey_s_c_null - except when we ask
for a key at a btree level that doesn't exist, which can happen here.
We might want to revisit this, but we'll have to look over all the
places where we use peek_slot() on interior nodes.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Codepaths that create entries in the snapshots btree currently call
bch2_mark_snapshot(), which updates the in-memory snapshot table, before
transaction commit.
This is because bch2_mark_snapshot() is an atomic trigger, run with
btree write locks held, and isn't allowed to fail - but it might need to
reallocate the table, hence we call it early when we're still allowed to
fail.
This is generally harmless - if we fail, we'll have left an entry in the
snapshots table around, but nothing will reference it and it'll get
overwritten if reused by another transaction.
But check_snapshot_exists(), which reconstructs snapshots when the
snapshots btree has been corrupted or lost, was erronously rechecking if
the snapshot exists inside the transaction commit loop - so on
transaction restart (in this case mem_realloced), the second iteration
would return without repairing.
This code needs some cleanup: splitting out a "maybe realloc snapshots
table" helper would have avoided this, that will be in the next patch.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
The inconsistency error path calls print_string_as_lines, which calls
console_lock, which is a potentially-sleeping function and so can't be
called in an atomic context.
Replace calls to it with the nonblocking variant which is safe to call.
Signed-off-by: Bharadwaj Raju <bharadwaj.raju777@gmail.com>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
Two fixes from the recent logging changes:
bch2_inconsistent(), bch2_fs_inconsistent() be called from interrupt
context, or with rcu_read_lock() held.
The one syzbot found is in
bch2_bkey_pick_read_device
bch2_dev_rcu
bch2_fs_inconsistent
We're starting to switch to lift the printbufs up to higher levels so we
can emit better log messages and print them all in one go (avoid
garbling), so that conversion will help with spotting these in the
future; when we declare a printbuf it must be flagged if we're in an
atomic context.
Secondly, in btree_node_write_endio:
00085 BUG: sleeping function called from invalid context at include/linux/sched/mm.h:321
00085 in_atomic(): 1, irqs_disabled(): 1, non_block: 0, pid: 618, name: bch-reclaim/fa6
00085 preempt_count: 10001, expected: 0
00085 RCU nest depth: 0, expected: 0
00085 4 locks held by bch-reclaim/fa6/618:
00085 #0: ffffff80d7ccad68 (&j->reclaim_lock){+.+.}-{4:4}, at: bch2_journal_reclaim_thread+0x84/0x198
00085 #1: ffffff80d7c84218 (&c->btree_trans_barrier){.+.+}-{0:0}, at: __bch2_trans_get+0x1c0/0x440
00085 #2: ffffff80cd3f8140 (bcachefs_btree){+.+.}-{0:0}, at: __bch2_trans_get+0x22c/0x440
00085 #3: ffffff80c3823c20 (&vblk->vqs[i].lock){-.-.}-{3:3}, at: virtblk_done+0x58/0x130
00085 irq event stamp: 328
00085 hardirqs last enabled at (327): [<ffffffc080073a14>] finish_task_switch.isra.0+0xbc/0x2a0
00085 hardirqs last disabled at (328): [<ffffffc080971a10>] el1_interrupt+0x20/0x60
00085 softirqs last enabled at (0): [<ffffffc08002f920>] copy_process+0x7c8/0x2118
00085 softirqs last disabled at (0): [<0000000000000000>] 0x0
00085 Preemption disabled at:
00085 [<ffffffc08003ada0>] irq_enter_rcu+0x18/0x90
00085 CPU: 8 UID: 0 PID: 618 Comm: bch-reclaim/fa6 Not tainted 6.14.0-rc6-ktest-g04630bde23e8 #18798
00085 Hardware name: linux,dummy-virt (DT)
00085 Call trace:
00085 show_stack+0x1c/0x30 (C)
00085 dump_stack_lvl+0x84/0xc0
00085 dump_stack+0x14/0x20
00085 __might_resched+0x180/0x288
00085 __might_sleep+0x4c/0x88
00085 __kmalloc_node_track_caller_noprof+0x34c/0x3e0
00085 krealloc_noprof+0x1a0/0x2d8
00085 bch2_printbuf_make_room+0x9c/0x120
00085 bch2_prt_printf+0x60/0x1b8
00085 btree_node_write_endio+0x1b0/0x2d8
00085 bio_endio+0x138/0x1f0
00085 btree_node_write_endio+0xe8/0x2d8
00085 bio_endio+0x138/0x1f0
00085 blk_update_request+0x220/0x4c0
00085 blk_mq_end_request+0x28/0x148
00085 virtblk_request_done+0x64/0xe8
00085 blk_mq_complete_request+0x34/0x40
00085 virtblk_done+0x78/0x130
00085 vring_interrupt+0x6c/0xb0
00085 __handle_irq_event_percpu+0x8c/0x2e0
00085 handle_irq_event+0x50/0xb0
00085 handle_fasteoi_irq+0xc4/0x250
00085 handle_irq_desc+0x44/0x60
00085 generic_handle_domain_irq+0x20/0x30
00085 gic_handle_irq+0x54/0xc8
00085 call_on_irq_stack+0x24/0x40
Reported-by: syzbot+c82cd2906e2f192410bb@syzkaller.appspotmail.com
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
In attempt_compress(), the return value of zlib_deflateInit2() needs to be
checked. A proper implementation can be found in pstore_compress().
Add an error check and return 0 immediately if the initialzation fails.
Fixes: 986e9842fb ("bcachefs: Compression levels")
Signed-off-by: Wentao Liang <vulab@iscas.ac.cn>
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
io_uring always switches requests to atomic refcounting for iowq
execution before there is any parallilism by setting REQ_F_REFCOUNT,
and the flag is not cleared until the request completes. That should be
fine as long as the compiler doesn't make up a non existing value for
the flags, however KCSAN still complains when the request owner changes
oter flag bits:
BUG: KCSAN: data-race in io_req_task_cancel / io_wq_free_work
...
read to 0xffff888117207448 of 8 bytes by task 3871 on cpu 0:
req_ref_put_and_test io_uring/refs.h:22 [inline]
Skip REQ_F_REFCOUNT checks for iowq, we know it's set.
Reported-by: syzbot+903a2ad71fb3f1e47cf5@syzkaller.appspotmail.com
Signed-off-by: Pavel Begunkov <asml.silence@gmail.com>
Link: https://lore.kernel.org/r/d880bc27fb8c3209b54641be4ff6ac02b0e5789a.1743679736.git.asml.silence@gmail.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull firewire update from Takashi Sakamoto:
"A single commit to use the common helper function for on-stack
trailing array to enqueue any isochronous packet by the requests
from userspace applications"
* tag 'firewire-updates-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: avoid -Wflex-array-member-not-at-end warning
Commit [1] moves percpu data on x86 from address 0x000... to address
0xfff...
Before [1]:
159020: 0000000000030700 0 OBJECT GLOBAL DEFAULT 23 pcpu_hot
After [1]:
152602: ffffffff83a3e034 4 OBJECT GLOBAL DEFAULT 35 pcpu_hot
As a result, verifier_bpf_fastcall tests should now expect a negative
value for pcpu_hot, IOW, the disassemble should show "r=" instead of
"w=".
Fix this in the test.
Note that, a later change created a new variable "cpu_number" for
bpf_get_smp_processor_id() [2]. The inlining logic is updated properly
as part of this change, so there is no need to fix anything on the
kernel side.
[1] commit 9d7de2aa8b ("x86/percpu/64: Use relative percpu offsets")
[2] commit 01c7bc5198 ("x86/smp: Move cpu number to percpu hot section")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250328193124.808784-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
The change in struct file [1] moved f_ref to the 3rd cache line.
It made *(u64 *)file dereference invalid from the verifier point of view,
because btf_struct_walk() walks into f_lock field, which is 4-byte long.
Fix the selftests to deference the file pointer as a 4-byte access.
[1] commit e249056c91 ("fs: place f_ref to 3rd cache line in struct file to resolve false sharing")
Reported-by: Jakub Kicinski <kuba@kernel.org>
Signed-off-by: Song Liu <song@kernel.org>
Link: https://lore.kernel.org/r/20250327185528.1740787-1-song@kernel.org
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
When the cq reservation is failed, the error code is not set which is
initialized to zero in __xsk_generic_xmit(). That means the packet is not
send successfully but sendto() return ok.
Considering the impact on uapi, return -EAGAIN is a good idea. The cq is
full usually because it is not released in time, try to send msg again is
appropriate.
The bug was at the very early implementation of xsk, so the Fixes tag
targets the commit that introduced the changes in
xsk_cq_reserve_addr_locked where this fix depends on.
Fixes: e6c4047f51 ("xsk: Use xsk_buff_pool directly for cq functions")
Suggested-by: Magnus Karlsson <magnus.karlsson@gmail.com>
Signed-off-by: Wang Liang <wangliang74@huawei.com>
Signed-off-by: Martin KaFai Lau <martin.lau@kernel.org>
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250227081052.4096337-1-wangliang74@huawei.com
Signed-off-by: Alexei Starovoitov <ast@kernel.org>
Pull libnvdimm updates from Ira Weiny:
"Most of the code changes are to remove dead code.
The bug fixes are minor, Syzkaller and one for broken devices which
are unlikely to be in the field. So no need to backport them.
- two patches to remove dead code: nd_attach_ndns() and
nd_region_conflict() have not been used since 2017 and 2019
respectively
- Fix divide-by-0 if device returns a broken LSA value
- Fix Syzkaller reported bug"
* tag 'libnvdimm-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
libnvdimm/labels: Fix divide error in nd_label_data_init()
libnvdimm: Remove unused nd_attach_ndns
libnvdimm: Remove unused nd_region_conflict
acpi: nfit: fix narrowing conversion in acpi_nfit_ctl
Pull Compute Express Link (CXL) updates from Dave Jiang:
- Add support for Global Persistent Flush (GPF)
- Cleanup of DPA partition metadata handling:
- Remove the CXL_DECODER_MIXED enum that's not needed anymore
- Introduce helpers to access resource and perf meta data
- Introduce 'struct cxl_dpa_partition' and 'struct cxl_range_info'
- Make cxl_dpa_alloc() DPA partition number agnostic
- Remove cxl_decoder_mode
- Cleanup partition size and perf helpers
- Remove unused CXL partition values
- Add logging support for CXL CPER endpoint and port protocol errors:
- Prefix protocol error struct and function names with cxl_
- Move protocol error definitions and structures to a common location
- Remove drivers/firmware/efi/cper_cxl.h to include/linux/cper.h
- Add support in GHES to process CXL CPER protocol errors
- Process CXL CPER protocol errors
- Add trace logging for CXL PCIe port RAS errors
- Remove redundant gp_port init
- Add validation of cxl device serial number
- CXL ABI documentation updates/fixups
- A series that uses guard() to clean up open coded mutex lockings and
remove gotos for error handling.
- Some followup patches to support dirty shutdown accounting:
- Add helper to retrieve DVSEC offset for dirty shutdown registers
- Rename cxl_get_dirty_shutdown() to cxl_arm_dirty_shutdown()
- Add support for dirty shutdown count via sysfs
- cxl_test support for dirty shutdown
- A series to support CXL mailbox Features commands.
Mostly in preparation for CXL EDAC code to utilize the Features
commands. It's also in preparation for CXL fwctl support to utilize
the CXL Features. The commands include "Get Supported Features", "Get
Feature", and "Set Feature".
- A series to support extended linear cache support described by the
ACPI HMAT table.
The addition helps enumerate the cache and also provides additional
RAS reporting support for configuration with extended linear cache.
(and related fixes for the series).
- An update to cxl_test to support a 3-way capable CFMWS
- A documentation fix to remove unused "mixed mode"
* tag 'cxl-for-6.15' of git://git.kernel.org/pub/scm/linux/kernel/git/cxl/cxl: (39 commits)
cxl/region: Fix the first aliased address miscalculation
cxl/region: Quiet some dev_warn()s in extended linear cache setup
cxl/Documentation: Remove 'mixed' from sysfs mode doc
cxl: Fix warning from emitting resource_size_t as long long int on 32bit systems
cxl/test: Define a CFMWS capable of a 3 way HB interleave
cxl/mem: Do not return error if CONFIG_CXL_MCE unset
tools/testing/cxl: Set Shutdown State support
cxl/pmem: Export dirty shutdown count via sysfs
cxl/pmem: Rename cxl_dirty_shutdown_state()
cxl/pci: Introduce cxl_gpf_get_dvsec()
cxl/pci: Support Global Persistent Flush (GPF)
cxl: Document missing sysfs files
cxl: Plug typos in ABI doc
cxl/pmem: debug invalid serial number data
cxl/cdat: Remove redundant gp_port initialization
cxl/memdev: Remove unused partition values
cxl/region: Drop goto pattern of construct_region()
cxl/region: Drop goto pattern in cxl_dax_region_alloc()
cxl/core: Use guard() to drop goto pattern of cxl_dpa_alloc()
cxl/core: Use guard() to drop the goto pattern of cxl_dpa_free()
...
Pull USB / Thunderbolt updates from Greg KH:
"Here is the big set of USB and Thunderbolt driver updates for
6.15-rc1. Included in here are:
- Thunderbolt driver and core api updates for new hardware and
features
- usb-storage const array cleanups
- typec driver updates
- dwc3 driver updates
- xhci driver updates and bugfixes
- small USB documentation updates
- usb cdns3 driver updates
- usb gadget driver updates
- other small driver updates and fixes
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (92 commits)
thunderbolt: Do not add non-active NVM if NVM upgrade is disabled for retimer
thunderbolt: Scan retimers after device router has been enumerated
usb: host: cdns3: forward lost power information to xhci
usb: host: xhci-plat: allow upper layers to signal power loss
usb: xhci: change xhci_resume() parameters to explicit the desired info
usb: cdns3-ti: run HW init at resume() if HW was reset
usb: cdns3-ti: move reg writes to separate function
usb: cdns3: call cdns_power_is_lost() only once in cdns_resume()
usb: cdns3: rename hibernated argument of role->resume() to lost_power
usb: xhci: tegra: rename `runtime` boolean to `is_auto_runtime`
usb: host: xhci-plat: mvebu: use ->quirks instead of ->init_quirk() func
usb: dwc3: Don't use %pK through printk
usb: core: Don't use %pK through printk
usb: gadget: aspeed: Add NULL pointer check in ast_vhub_init_dev()
dt-bindings: usb: qcom,dwc3: Synchronize minItems for interrupts and -names
usb: common: usb-conn-gpio: switch psy_cfg from of_node to fwnode
usb: xhci: Avoid Stop Endpoint retry loop if the endpoint seems Running
usb: xhci: Don't change the status of stalled TDs on failed Stop EP
xhci: Avoid queuing redundant Stop Endpoint command for stalled endpoint
xhci: Handle spurious events on Etron host isoc enpoints
...
Pull tty/serial driver updates from Greg KH:
"Here is the big set of serial and tty driver updates for 6.15-rc1.
Include in here are the following:
- more great tty layer cleanups from Jiri. Someday this will be done,
but that's not going to be any year soon...
- kdb debug driver reverts to fix a reported issue
- lots of .dts binding updates for different devices with serial
devices
- lots of tiny updates and tweaks and a few bugfixes for different
serial drivers.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (79 commits)
tty: serial: fsl_lpuart: Fix unused variable 'sport' build warning
serial: stm32: do not deassert RS485 RTS GPIO prematurely
serial: 8250: add driver for NI UARTs
dt-bindings: serial: snps-dw-apb-uart: document RZ/N1 binding without DMA
serial: icom: fix code format problems
serial: sh-sci: Save and restore more registers
tty: serial: pl011: remove incorrect of_match_ptr annotation
dt-bindings: serial: snps-dw-apb-uart: Add support for rk3562
tty: serial: lpuart: only disable CTS instead of overwriting the whole UARTMODIR register
tty: caif: removed unused function debugfs_tx()
serial: 8250_dma: terminate correct DMA in tx_dma_flush()
tty: serial: fsl_lpuart: rename register variables more specifically
tty: serial: fsl_lpuart: use port struct directly to simply code
tty: serial: fsl_lpuart: Use u32 and u8 for register variables
tty: serial: fsl_lpuart: disable transmitter before changing RS485 related registers
tty: serial: 8250: Add Brainboxes XC devices
dt-bindings: serial: fsl-lpuart: support i.MX94
tty: serial: 8250: Add some more device IDs
dt-bindings: serial: samsung: add exynos7870-uart compatible
serial: 8250_dw: Comment possible corner cases in serial_out() implementation
...
Pull staging driver updates from Greg KH:
"Here is the big set of staging driver cleanups and updates for
6.15-rc1.
As expected, with the introduction of the gpib drivers, loads of
cleanups and fixes showed up, with the huge majority of changes being
for that chunk of drivers. This is good and shows that the community
can fix up things in public when asked to. Also included in here are:
- small sm750fb cleanups
- tiny rtl8723bs cleanups
- more vchiq_arm cleanups and changes, hopefully this will get out of
staging soon
All of these have been in linux-next for almost 2 weeks now with no
reported issues"
* tag 'staging-6.15-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (76 commits)
staging: rtl8723bs: fixed a unnecessary parentheses coding style issue
staging: vchiq_arm: Improve initial VCHIQ connect
staging: vchiq_arm: Create keep-alive thread during probe
staging: vchiq_arm: Stop kthreads if vchiq cdev register fails
staging: vchiq_arm: Fix possible NPR of keep-alive thread
staging: vchiq_arm: Register debugfs after cdev
staging: vchiq_arm: Don't use %pK through printk
staging: rtl8723bs: select CONFIG_CRYPTO_LIB_AES
staging: rtl8723bs: Remove some unused functions, macros, and structs
staging: gpib: change return type of t1_delay function to report errors
staging: gpib: remove commented-out lines
staging: gpib: fix kernel-doc section for usb_gpib_line_status() function
staging: gpib: fix kernel-doc section for function usb_gpib_interface_clear()
staging: gpib: fix kernel-doc section for write_loop() function
staging: gpib: Removing typedef for gpib_board
staging: gpib: struct typing for gpib_gboard_t
staging: gpib: tnt4882: struct gpib_board
staging: gpib: tms9914: struct gpib_board
staging: gpib: pc2: struct gpib_board
staging: gpib: ni_usb_gpib: struct gpib_board
...
