ARM: tegra: Device tree changes for v5.18-rc1
The changes in this set are cleanups and fixes for 32-bit Tegra device
tree files. With these, some json-schema validation errors are fixed.
* tag 'tegra-for-5.18-arm-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
ARM: tegra: tamonten: Fix I2C3 pad setting
ARM: tegra: Fix ethernet node names
ARM: tegra: paz00: Add MMC aliases
ARM: tegra: tf700t: Rename DSI node
ARM: tegra: transformer: Drop reg-shift for Tegra HS UART
ARM: tegra: asus-tf101: Enable S/PDIF and HDMI audio
ARM: tegra: Update jedec,lpddr2 revision-id binding
Link: https://lore.kernel.org/r/20220225164741.1064416-3-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
dt-bindings: Changes for v5.18-rc1
This contains additions to various DT bindings includes (such as clocks,
resets, power domains, memory controller clients and SMMU stream IDs)
for Tegra234.
* tag 'tegra-for-5.18-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: memory: Add Tegra234 PCIe memory
dt-bindings: power: Add Tegra234 PCIe power domains
dt-bindings: Add Tegra234 PCIe clocks and resets
dt-bindings: Document Tegra234 HDA support
dt-bindings: Add HDA support for Tegra234
dt-bindings: Add Tegra234 APE support
dt-bindings: Add headers for Tegra234 PWM
dt-bindings: Add headers for Tegra234 I2C
Link: https://lore.kernel.org/r/20220225164741.1064416-2-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT for v5.18, round 1
Highlights:
----------
-MCU:
-Fix W=1 warnings for timers (duplicate unit-address) for F4 and F7 series.
-Enable DMA2D on f469 disco.
- MPU:
-General:
- Add new board support: emSBS-Argon.
- Add dma configuration for all U(S)ART nodes and disable them in board files
when they are not needed in stm32mp15.
- Correct GIC PPI interrupts on stm32mp15 and stm32mp13.
- ST boards:
- Add EXTI support on stm32mp13
- Add DMA, MDMA and DMAmux support to stm32mp13 (iso feature than MP15)
- Update SDMMC1/2 support on stm32mp13: sleep config, update version to v2.2,
update the max frequency to 130 MHz.
- DH boards:
- Enable rproc to control the CM4 and IPCC mailbox to interact with it.
* tag 'stm32-dt-for-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (43 commits)
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp15
ARM: dts: stm32: Correct masks for GIC PPI interrupts on stm32mp13
ARM: dts: stm32: remove timer5 duplicate unit-address on stm32f7 series
ARM: dts: stm32: remove some timer duplicate unit-address on stm32f7 series
ARM: dts: stm32: Enable EXTI on stm32mp13
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcor-avenger96
ARM: dts: stm32: keep uart4 behavior on stm32mp15xx-dhcom-som
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-picoitx
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-pdk2
ARM: dts: stm32: keep uart nodes behavior on stm32mp15xx-dhcom-drc02
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-odyssey
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-lxa-mc1
ARM: dts: stm32: keep uart nodes behavior on stm32mp157a-stinger96
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0
ARM: dts: stm32: keep uart nodes behavior on stm32mp1-microdev2.0-of7
ARM: dts: stm32: keep uart4 behavior on stm32mp157a-iot-box
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-edimm2.2
ARM: dts: stm32: keep uart4 behavior on icore-stm32mp1-ctouch2
ARM: dts: stm32: keep uart4 and uart7 behavior on stm32mp15xx-dkx
ARM: dts: stm32: keep uart4 behavior on stm32mp157c-ed1
...
Link: https://lore.kernel.org/r/893924a9-bcc4-9fa9-4f8e-7f56e77f6854@foss.st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Compatible for the rk3568-usb2phy-grf.
* tag 'v5.18-rockchip-drivers-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
dt-bindings: soc: rockchip: add rk3568-usb2phy-grf
Link: https://lore.kernel.org/r/9977257.a15B8eIVjX@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
AT91 & LAN966 DT #1 for 5.18:
- lan966x basic DT and associated evaluation board pcb8291 (2-ports)
- documentation for an upcoming Kontron switch board featuring a LAN9668
- one fix for an old bug we have with PMECC on sama5d2 in some corner
cases
- sama7g5 and its EK: crypto, CAN and DVFS operating points
* tag 'at91-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: dts: at91: sama7g5: add opps
ARM: dts: at91: sama7g5ek: set regulator voltages for standby state
ARM: dts: at91: fix low limit for CPU regulator
ARM: dts: at91: sama7g5: Enable can0 and can1 support in sama7g5-ek
ARM: dts: at91: sama7g5: Add can controllers of sama7g5
ARM: dts: at91: sama7g5: Add crypto nodes
ARM: dts: at91: Use the generic "crypto" node name for the crypto IPs
ARM: dts: at91: remove status = "okay" from soc specific dtsi
ARM: dts: at91: sama5d2: Fix PMERRLOC resource size
dt-bindings: arm: at91: add Kontron's new KSwitches
ARM: dts: add DT for lan966 SoC and 2-port board pcb8291
Link: https://lore.kernel.org/r/20220225110735.18080-1-nicolas.ferre@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM DT updates for v5.18 (take three)
- Pin control support for the R-Car S4-8 SoC on the Spider development
board.
* tag 'renesas-arm-dt-for-v5.18-tag3' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: spider: Complete SCIF3 description
arm64: dts: renesas: r8a779f0: Add pinctrl device node
Link: https://lore.kernel.org/r/cover.1645795643.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM DT updates for v5.18 (take two)
- Document the use of the renesas-soc IRC channel,
- Watchdog support for the R-Car S4-8, RZ/N1D, and RZ/G2LC SoCs on the
Spider, RZN1D-DB, and RZ/G2LC SMARC EVK development boards,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.18-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
ARM: dts: renesas: Align GPIO hog names with dtschema
arm64: dts: renesas: Align GPIO hog names with dtschema
arm64: dts: renesas: rzg2lc-smarc-som: Enable watchdog
ARM: dts: r9a06g032-rzn1d400-db: Enable watchdog0 with a 60s timeout
ARM: dts: r9a06g032: Add the watchdog nodes
dt-bindings: clock: r9a06g032: Add the definition of the watchdog clock
arm64: dts: renesas: spider-cpu: Enable watchdog timer
arm64: dts: renesas: r8a779f0: Add RWDT node
MAINTAINERS: Specify IRC channel for Renesas ARM64 port
MAINTAINERS: Specify IRC channel for Renesas ARM32 port
arm64: dts: renesas: ulcb-kf: fix wrong comment
Link: https://lore.kernel.org/r/cover.1645784466.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Remove an unneeded status property from the crypto-node
on rk3288.
* tag 'v5.18-rockchip-dts32-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: remove status from rk3288 crypto node
Link: https://lore.kernel.org/r/19595245.eudUkVceaq@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
New boards: Pine64 PineNote ereader tablet and Bananapi-R2-Pro (both rk356x)
New peripherals for the rk356x-family (pdm-audio, gpu, another i2s, usb2)
A lot of additions to Quartz-A (connector-header, gpu, sdmmc1, io-domains,
usb2) and rk3568-evb1-v10 (rk809-audio, cpu-regulator, gpu, tsadc, led,
usb2, touchscreen).
Fixes for the pwm-regulators, that used wrong names for their supplies
as well adapting the cros-ec pwm nodes to a changed binding (going via
the pwm tree).
And as sort of misc-changes, defined the logic-regulator on rk3399-puma
as well as enabled the mali-gpu on the rk3399-firefly.
* tag 'v5.18-rockchip-dts64-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip: (28 commits)
arm64: dts: rockchip: align Google CROS EC PWM node name with dtschema
arm64: dts: rockchip: enable rk809 audio codec on the rk3568 evb1-v10
arm64: dts: rockchip: set vdd_gpu regulator on rk3568-evb1-v10 to always on
arm64: dts: rockchip: add the vdd_cpu regulator to rk3568-evb1-v10
arm64: dts: rockchip: enable work led on rk3568-evb1-v10
arm64: dts: rockchip: fix supplies for pwm regulators
arm64: dts: rockchip: define vdd_log on rk3399-puma
arm64: dts: rockchip: Add Pine64 PineNote board
arm64: dts: rockchip: Add pdm node to rk356x
dt-bindings: arm: rockchip: Add Pine64 PineNote board
arm64: dts: rockchip: enable the tsadc on rk3568-evb1-v10
arm64: dts: rockchip: enable the gpu on rk3568-evb1-v10
arm64: dts: rockchip: enable the gpu on quartz64-a
arm64: dts: rockchip: add cooling map and trip points for gpu to rk356x
arm64: dts: rockchip: add gpu node to rk356x
arm64: dts: rockchip: add usb2 support to rk3568-evb1-v10
arm64: dts: rockchip: rename and sort the rk356x usb2 phy handles
arm64: dts: rockchip: add the i2s3_2ch node to rk356x
arm64: dts: rockchip: Add Bananapi R2 Pro
dt-bindings: rockchip: Add BananaPi R2 Pro Board
...
Link: https://lore.kernel.org/r/6456947.djgVdjDsCv@phil
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Usual round of DT patches for the 5.18 merge window, with:
- DT fixes
- ethernet0 alias for Nanopi NEO
- r_uart node for H3/H5
- eMMC and bluetooth nodes for Nanopi NEO air
- updated maintainers for Allwinner SoCs
- new board: A20-Marsboard
* tag 'sunxi-dt-for-5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sunxi/linux:
MAINTAINERS: Update Allwinner SoCs maintainers
ARM: dts: sun8i-h3: Drop args in 'thermal-sensors'
ARM: dts: sun8i: v3s: Move the csi1 block to follow address order
ARM: dts: sun8i: Add ethernet0 alias in Nanopi NEO's device tree
dt-bindings: arm: sunxi: add haoyu,a20-marsboard
ARM: dts: sun7i: Add A20-Marsboard
ARM: dts: sunxi: h3/h5: add r_uart node
ARM: dts: nanopi-neo-air: Add eMMC and bluetooth
Link: https://lore.kernel.org/r/YhgMJ0AqaHopzaW3@kista.localdomain
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for v5.18
Devicetree changes for omaps for v5.18:
- The devicetree node naming for pdu001 RTC name gets corrected
- For logicpd-torpedo baseboard, isp1763 USB controller gets added
- New board variant for SanCloud BBE Extended WiFi gets added
* tag 'omap-for-v5.18/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am335x-sancloud-bbe-extended-wifi: New devicetree
ARM: dts: logicpd-torpedo: Add isp1763 support to baseboard
ARM: dts: am334x: pdu001: Use correct node name for RTC
Link: https://lore.kernel.org/r/pull-1645606669-127734@atomide.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm Juno update for v5.18
Just a single update adding long waited support for SCMI firmware variant
as separate devicetrees. I wanted to deal with this differences in the
firmware interface within the bootloader for long time. But with variety
of bootloaders (u-boot, UEFI, ..etc) and need to add SCMI and SCPI
support for sake of discovery with discrepancies in shared memory layout,
it turned out difficult.
So, finally we are adding it as separate files so that we don't break
support for older SCPI firmware interface.
* tag 'juno-update-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add separate SCMI variants
arm64: dts: juno: Remove GICv2m dma-range
Link: https://lore.kernel.org/r/20220222201812.3338619-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm64 device tree change for 5.18:
- New support for a number of i.MX8M Mini based boards: Protonic PRT8MM,
emCON-MX8M Mini, Toradex Verdin, Gateworks GW7903.
- A series from Adam Ford to enable GPC, USB and display support for
i.MX8M Nano.
- Enable G1 and G2 video decoder devices for i.MX8MM and i.MX8MQ.
- Enable PCIe support on imx8mm-beacon, tqma8mqml, imx8mm-evk,
imx8mq-evk and imx8mm-venice board.
- A series from Hugo Villeneuve to add PCA6416 interrupt controller
configuration, GPIO line names and i2C5 support for imx8mp-evk board.
- Correct I2C3 pad-ctrl and add internal display support for mnt-reform2
board.
- Improve fsl-ls1028a-qds overlay support by dropping syntax hard coding
and using overlay target for build.
- Add overlay support for serial modes and imx219 rpi v2 camera on
Gateworks imx8mm-venice devices.
- A set of patches from Teresa Remmet to update phyCORE-i.MX8MP SoM
device tree, including drive strength updates of different interfaces
and PMIC configuration changes.
- Device additions on various boards and some small random changes.
* tag 'imx-dt64-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (50 commits)
arm64: dts: imx8mp-phycore-som: Set usdhc root clock for eMMC
arm64: dts: imx8mp-phycore-som: LDO5 needs to be enabled instead of LDO4
arm64: dts: imx8mp-phycore-som: Set VDD_ARM run and standby voltage
arm64: dts: imx8mp-phycore-som: Update WDOG muxing
arm64: dts: imx8mp-phycore-som: Reduce drive strength for fec tx lines
arm64: dts: imx8mp-phycore-som: Adapt eMMC drive strength
arm64: dts: imx8mp-phycore-som: Set minimum output impedance for eth phy
arm64: dts: imx8mm-venice-gw72xx-0x: add dt overlay for imx219 rpi v2 camera
arm64: dts: imx8mm-venice-gw73xx-0x: add dt overlay for imx219 rpi v2 camera
arm64: dts: imx8mm-venice-gw72xx-0x: add dt overlays for serial modes
arm64: dts: imx8mm-venice-gw73xx-0x: add dt overlays for serial modes
arm64: dts: imx: Add i.mx8mm Gateworks gw7903 dts support
arm64: dts: ls1028a: add efuse node
arm64: dts: imx8mp-evk: add support for I2C5
arm64: dts: imx8mp-evk: add PCA6416 gpio line names
arm64: dts: imx8qm: added more serial alias to dts
arm64: dts: imx8qm: add compatible string for usdhc3
arm64: dts: imx8mq-evk: Add second PCIe port support
arm64: dts: imx8mm-beacon: Enable PCIe
arm64: dts: freescale: add initial support for verdin imx8m mini
...
Link: https://lore.kernel.org/r/20220222075226.160187-5-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX arm device tree change for 5.18:
- A series from Alexander Stein to update imx6qdl based TQMA6 and MBA6
devices, adding I2C bus recovery, marking GPIO buttons as wakeup
source etc.
- A set of maintenance patches from Oleksij Rempel adding display,
CAN termination and thermal support for i.MX6 based boards from
Plymovent, Protonic and from Kverneland.
- A couple of patches from Thierry Reding to correct i.MX28 RTC
compatbile, and rename RTC device nodes for i.MX SoCs.
- Update i.MX7 device tree to use audio_mclk_post_div clock instead of
audio_mclk_root_clk, and move PCIe out of AIPS3 bus.
- A couple of patches on imx6qdl-phytec to support PMIC MFD subdevices.
- Add pinctrl header support for i.MXRT1050 SoC.
- Other small and random changes.
* tag 'imx-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (22 commits)
ARM: dts: imx6qp-sabresd: Enable PCIe support
ARM: dts: imx6dl: plym2m, prtvt7, victgo: add thermal zones and hwmon
ARM: dts: imx6dl: plym2m, prtvt7, victgo: make use of new resistive-adc-touch driver
ARM: dts: imx6qdl-vicut1: add CAN termination support
ARM: dts: imx6dl-prtvt7: Add missing tvp5150 video decoder node
ARM: dts: imx6dl-prtvt7: Add display and panel nodes
ARM: dts: imx6qdl-mba6: Move pinmux to regulator node
ARM: dts: imx6qdl: tqma6: Remove obsolete comment
ARM: dts: imx6qdl: tqma6: Mark gpio-buttons as wakeup-source
ARM: dts: imx6qdl: tqma6: Add i2c bus recovery
ARM: dts: imx6qdl-mba6: Move rtc alias to common location
ARM: dts: imx7: Move PCIe out of AIPS3
ARM: dts: imx: Add missing LVDS decoder on M53Menlo
ARM: dts: imx6qdl-phytec: handle unneeded MFD-subdevices correctly
ARM: dts: imx6qdl-phytec: add missing pmic MFD subdevices
ARM: dts: imx7: Use audio_mclk_post_div instead audio_mclk_root_clk
ARM: dts: imx28: reparent gpmi clock to ref_gpmi
ARM: dts: imxrt1050-pinfunc: Add pinctrl binding header
ARM: dts: imx6sx-udoo-neo: Add HDMI support
ARM: dts: imx6qdl-dhcom-pdk2: Include missing headers
...
Link: https://lore.kernel.org/r/20220222075226.160187-4-shawnguo@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Nuvoton device tree updates for 5.18
* Additions to wpcm450 following the upstremaing of the pinctrl/gpio
driver for this platform
* Match more of the platform in MAINTAINERS
* tag 'nuvoton-5.18-devicetree' of git://git.kernel.org/pub/scm/linux/kernel/git/joel/bmc:
MAINTAINERS: ARM/WPCM450: Add 'W:' line with wiki
ARM: dts: wpcm450: Add pinmux information to UART0
ARM: dts: wpcm450-supermicro-x9sci-ln4f: Add GPIO LEDs and buttons
ARM: dts: wpcm450: Add pin functions
ARM: dts: wpcm450: Add pinctrl and GPIO nodes
ARM: dts: wpcm450: Add global control registers (GCR) node
MAINTAINERS: Match all of bindings/arm/npcm/ as part of NPCM architecture
dt-bindings: arm/npcm: Add binding for global control registers (GCR)
Link: https://lore.kernel.org/r/CACPK8XdjF6dG04hR+iMpUP8=LSJi5x-hRivgCGDaY7o_461eJw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* 'mstar-dt-next' of https://github.com/linux-chenxing/linux:
ARM: mstar: Extend opp_table for infinity2m
ARM: mstar: Add OPP table for infinity3
ARM: mstar: Add OPP table for infinity
ARM: mstar: Link cpupll to second core
ARM: mstar: Link cpupll to cpu
ARM: mstar: Add cpupll to base dtsi
dt-bindings: clk: mstar msc313 cpupll binding description
ARM: dts: mstar: Add board for 100ask DongShanPiOne
dt-bindings: arm: mstar: Add compatible for 100ask DongShanPiOne
dt-bindings: vendor-prefixes: Add prefix for 100ask
ARM: dts: mstar: Add a dts for Miyoo Mini
dt-bindings: arm: mstar: Add compatible for Miyoo Mini
dt-bindings: vendor-prefixes: Add prefix for Miyoo
ARM: dts: mstar: Add the Wireless Tag IDO-SBC2D06-V1B-22W
dt-bindings: add vendor prefix for Wireless Tag
ARM: dts: mstar: Set gpio compatible for ssd20xd
Link: https://lore.kernel.org/r/20220216193131.59794-1-romain.perier@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
IXP4xx patches for the v5.18 kernel cycle:
- Fix up the WG302 to support the v1 version (also tested)
- Fix up the syscon size
- Drop the alias for UART1 in GW7001
* tag 'ixp4xx-dts-v5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: Drop serial 1 alias on GW7001
ARM: dts: ixp42x: Expand syscon register range
ARM: dts: ixp4xx: Fix up the Netgear WG302 device tree
Link: https://lore.kernel.org/r/CACRpkdaMk+XECwhXJYeiF8SMU6cQsj_dk8gGMoPE3zAURAPqTw@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Ux500 DTS updates for the v5.18 kernel cycle:
- Add battery thermal zones so we can monitor the battery temperature
- Enable charging options on AB8505
- Fix up all the AB8500 and AB8505 nodes in accordance with the new
schema.
- Fix the mounting matrix for the Janice phone.
* tag 'ux500-dts-v5.18-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-nomadik:
ARM: dts: ux500: Correct Janice accel mount matrix
ARM: dts: ux500: Update AB850[05] nodes
ARM: dts: AB8505: Enable charging options
ARM: dts: ux500: Add battery thermal zones and NTCs
Link: https://lore.kernel.org/r/CACRpkdaDcEqtSnWzRBnBHVweh2n=Dj3meHG9LND+K0Czb9ORGg@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DT binding updates for v5.18
- Document support for the new RZ/V2L SoC and the RZ/V2L SMARC EVK
board.
* tag 'renesas-dt-bindings-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: power: renesas,rzg2l-sysc: Document RZ/V2L SoC
dt-bindings: arm: renesas: Document Renesas RZ/V2L SoC on SMARC EVK
Link: https://lore.kernel.org/r/cover.1644587209.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM DT updates for v5.18
- External interrupt (INTC-EX) support for the R-Car V3U SoC,
- Initial support for the RZ/G2LC and RZ/V2L SoCs, and the RZ/G2LC and
RZ/V2L SMARC EVK development boards,
- Support for MAX9286 GMSL deserializers and GSML cameras on the Eagle
and Condor development boards,
- NAND support for the RZ/N1D SoC,
- DMA engine (SYS-DMAC) support for the R-Car S4-8 SoC,
- LVDS support for the R-Car M3-W+ SoC,
- HDMI output and 9-axis sensor support for the Kingfisher (ULCB
extension) board,
- MAX96712 GMSL serializer support for the Falcon development board,
- MOST network support for the R-Car H3, M3-W, M3-W+, M3-N, E3, and D3
SoCs,
- Miscellaneous fixes and improvements.
* tag 'renesas-arm-dt-for-v5.18-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel: (27 commits)
arm64: dts: renesas: rzg2lc-smarc: Use SW_SD0_DEV_SEL macro for eMMC/SDHI device selection
arm64: dts: renesas: rzg2lc-smarc: Enable CANFD channel 1
arm64: dts: renesas: rzg2lc-smarc: Enable SCIF1 on carrier board
arm64: dts: renesas: rzg2lc-smarc: Add macros for DIP-Switch settings
arm64: dts: renesas: rzg2l-smarc: Add common dtsi file
arm64: dts: renesas: rzg2lc-smarc: Enable microSD on SMARC platform
arm64: dts: renesas: rzg2lc-smarc-som: Enable eMMC on SMARC platform
arm64: dts: renesas: Add initial device tree for RZ/V2L SMARC EVK
arm64: dts: renesas: Add initial DTSI for RZ/V2L SoC
dt-bindings: clock: Add R9A07G054 CPG Clock and Reset Definitions
arm64: dts: renesas: ulcb/ulcb-kf: switch to use audio-graph-card2 for sound
arm64: dts: renesas: rcar-gen3: Add MOST devices
arm64: dts: renesas: Miscellaneous whitespace fixes
arm64: dts: renesas: falcon-csi-dsi: Add and connect MAX96712
arm64: dts: renesas: ulcb-kf: Add 9-asix sensor device
arm64: dts: renesas: ulcb-kf: Add KF HDMI output
arm64: dts: renesas: r8a77961: Add lvds0 device node
arm64: dts: renesas: r8a779f0: Add sys-dmac nodes
ARM: dts: r9a06g032: Describe the NAND controller
arm64: dts: renesas: Add GMSL cameras .dtsi
...
Link: https://lore.kernel.org/r/cover.1644587200.git.geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung pinctrl DTS and driver changes for v5.18
Conversion of Samsung pinctrl bindings to dtschema followed up with
alignment of DTS files to the dtschema.
The entire work consists of three parts but everything should be merged
at once to avoid dtschema check errors:
1. Samsung pinctrl driver change necessary to accept new DTS (driver
depends on node names and this has to be adjusted because of dtschema).
2. Conversion to dtschema which brings requirement of different naming
of the GPIO nodes.
3. DTS commits depending on driver (1) above, which convert all GPIO pin
bank names to new naming, required by dtschema.
This also includes few cleanups around DTS which are here to avoid
any merge conflicts.
The Samsung pinctrl driver changes are backwards compatible. However
the DTS changes (renaming nodes) could cause problems in out-of-tree or
other project implementations of the driver.
* tag 'samsung-dt-pinctrl-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (28 commits)
arm64: dts: exynos: use dedicated wake-up pinctrl compatible in ExynosAutov9
ARM: dts: s5pv210: align pinctrl with dtschema
ARM: dts: s3c64xx: align pinctrl with dtschema
ARM: dts: s3c24xx: align pinctrl with dtschema
arm64: dts: exynos: align pinctrl with dtschema in ExynosAutov9
arm64: dts: exynos: align pinctrl with dtschema in Exynos7
arm64: dts: exynos: align pinctrl with dtschema in Exynos5433
ARM: dts: exynos: align pinctrl with dtschema in Exynos542x/5800
ARM: dts: exynos: align pinctrl with dtschema in Exynos5410
ARM: dts: exynos: align pinctrl with dtschema in Exynos5260
ARM: dts: exynos: align pinctrl with dtschema in Exynos5250
ARM: dts: exynos: align pinctrl with dtschema in Exynos4412
ARM: dts: exynos: align pinctrl with dtschema in Exynos4210
ARM: dts: exynos: align pinctrl with dtschema in Exynos3250
ARM: dts: s3c64xx: drop unneeded pinctrl wake-up interrupt mapping
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pi
ARM: dts: exynos: override pins by label in Peach Pi
ARM: dts: exynos: simplify PMIC DVS pin configuration in Peach Pit
ARM: dts: exynos: override pins by label in Peach Pit
ARM: dts: exynos: simplify PMIC DVS pin configuration in Odroid XU
...
Link: https://lore.kernel.org/r/20220129115352.13274-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM64 changes for v5.18
1. Minor improvements and dtschema fixes (node names, properties).
2. Fix issues pointed out by DT schema checks:
- Add necessary clock controller inputs on Exynos7.
- Add USB DWC3 supplies.
- Drop old syscon phandle on Exynos5433.
3. Add initial Exynos850 support and WinLink E850-96 board using it.
* tag 'samsung-dt64-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: exynos: adjust USB DRD clocks with dtschema in Exynos7
arm64: dts: exynos: drop unneeded syscon phandle in Exynos5433 LPASS
arm64: dts: exynos: align pl330 node name with dtschema
arm64: dts: exynos: Add initial E850-96 board support
arm64: dts: exynos: Add initial Exynos850 SoC support
arm64: dts: exynos: add USB DWC3 supplies to Espresso board
arm64: dts: exynos: add necessary clock inputs in Exynos7
arm64: dts: exynos: Align MAX77843 nodes with dtschema on TM2
Link: https://lore.kernel.org/r/20220209145226.184375-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Samsung DTS ARM changes for v5.18
1. Minor improvements and dtschema fixes (node names, properties).
2. Fix issues pointed out by DT schema checks:
- Add necessary clock controller inputs on Exynos5260.
- Drop unsupported regulators on Odroid XU.
- Add USB DWC3 supplies.
- Drop old thermal properties from Exynos4210.
3. Add support for Samsung Chagall WiFi (Exynos5420, Samsung Galaxy Tab
S 10.5", SM-T800 ) and a similar Samsung Klimt WiFi (Samsung Galaxy
Tab S 8.4").
4. Add battery to Samsung P4Nnote (Exynos4412, Samsung Galaxy Note
10.1).
* tag 'samsung-dt-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux: (22 commits)
ARM: dts: exynos: use generic node name for LPDDR3 timings in Odroid
ARM: dts: exynos: add charger and battery to p4note
ARM: dts: exynos: update dma node name with dtschema
ARM: dts: exynos: use define for TMU clock on Exynos4412
ARM: dts: exynos: drop old thermal properties from Exynos4210
ARM: dts: exynos: add fake USB DWC3 supplies to SMDK5410
ARM: dts: exynos: add USB DWC3 supplies to SMDK5420
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Peach Pi
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Peach Pit
ARM: dts: exynos: add USB DWC3 supplies to ArndaleOcta
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Spring
ARM: dts: exynos: add USB DWC3 supplies to Chromebook Snow
ARM: dts: exynos: add USB DWC3 supplies to SMDK5250
ARM: dts: exynos: add USB DWC3 supplies to Arndale
ARM: dts: exynos: Add support for Samsung Klimt WiFi
dt-bindings: arm: samsung: document Klimt WiFi board binding
ARM: dts: exynos: Add support for Samsung Chagall WiFi
dt-bindings: arm: samsung: document Chagall WiFi board binding
ARM: dts: exynos: drop unsupported MAX77802 regulators on Odroid XU
ARM: dts: exynos: add necessary clock controller inputs in Exynos5260
...
Link: https://lore.kernel.org/r/20220209145226.184375-1-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Tesla FSD ARM64 changes for v5.18
Add Tesla FSD SoC ARM64 platform: bindings, DTSI+DTS, maintainer's entry
and defconfig change. This brings and enables this new platform.
This includes clock controller bindings (header files with clock IDs)
which are shared also with Tesla FSD SoC clock controller pull request.
* tag 'tesla-dt64-5.18' of git://git.kernel.org/pub/scm/linux/kernel/git/krzk/linux:
arm64: dts: fsd: Add SPI device nodes
arm64: defconfig: Enable Tesla FSD SoC
arm64: dts: fsd: Add initial pinctrl support
arm64: dts: fsd: Add initial device tree support
dt-bindings: clock: Document FSD CMU bindings
dt-bindings: clock: Add bindings definitions for FSD CMU blocks
dt-bindings: arm: add Tesla FSD ARM SoC
dt-bindings: add vendor prefix for Tesla
Link: https://lore.kernel.org/r/20220204154112.133723-2-krzysztof.kozlowski@canonical.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This patch fixes the tristate configuration for i2c3 function assigned
to the dtf pins on the Tamonten Tegra20 SoM.
Signed-off-by: Richard Leitner <richard.leitner@skidata.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Using GIC_CPU_MASK_SIMPLE(x), x should reflect the number of CPUs.
STM32MP151 is a single A7.
STM32MP153/157 is a dual A7.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Using GIC_CPU_MASK_SIMPLE(x), x should reflect the number of CPUs.
STM32MP13 is a single core A7.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Acked-by: Marc Zyngier <maz@kernel.org>
Remove the following warnings seen when building with W=1.
Warning (unique_unit_address): /soc/timer@40000c00: duplicate unit-address
(also used in node /soc/timers@40000c00)
This approach is based on some discussions[1], to restructure the dtsi
and dts files.
Timer5 is enabled by default on stm32f7 series, to act as clockevent. In
order to get rid of the W=1 warning, and be compliant with dt-schemas
(e.g. dtbs_check):
- In stm32f746.dtsi:
. Keep the more complete timers5 description
. Remove the most simple timer5 node that is duplicate
- In each board:
. adopt "st,stm32-timer" compatible for timers5, also add the interrupt
. use /delete-property/ and /delete-node/ so the it matches the
clockevent bindings
Note: all this is done in one shot (e.g. not split) to keep clockevent
functionality.
[1] https://lore.kernel.org/linux-arm-kernel/Yaf4jiZIp8+ndaXs@robh.at.kernel.org/
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
Several unused "timer" are duplicate nodes of "timers" nodes.
There are two dt-schemas:
- timer/st,stm32-timer.yaml: A timer is needed on STM32F7 series, on all
boards, to act as clockevent.
- mfd/st,stm32-timers.yaml: Timers can be used for other purpose.
By default, timer5 is left enabled to be used as clockevent. Remove all
other timer clockevent nodes that are currently unused and duplicated.
This removes several messages: Warning (unique_unit_address): /soc/timer@..
duplicate unit-address (also used in node /soc/timers@...)
Signed-off-by: Fabrice Gasnier <fabrice.gasnier@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
As EXTI/GIC mapping has changed between STM32MP15 and STM32MP13, a new
compatible is needed to choose mp13 mapping table in stm32-exti driver.
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp15xx-dhcor-avenger96 board device
tree to keep console in irq mode, as DMA support for console has been
removed from the driver by commit e359b4411c ("serial: stm32: fix
threaded interrupt handling").
Delete also usart2 and uart7 DMA property to keep current behavior.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp15xx-dhcom-som board device tree
to keep console in irq mode, as DMA support for console has been
removed from the driver by commit e359b4411c ("serial: stm32: fix
threaded interrupt handling").
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete usart3 and uart8 nodes DMA property in stm32mp15xx-dhcom-picoitx
board device tree to keep current behavior.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete usart3 and uart8 DMA property in stm32mp15xx-dhcom-pdk2 board
device tree to keep current behavior.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete usart3 and uart8 nodes DMA property in stm32mp15xx-dhcom-drc02
board device tree to keep current behavior.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp157c-odyssey board device tree to
keep console in irq mode, as DMA support for console has been removed
from the driver by commit e359b4411c ("serial: stm32: fix threaded
interrupt handling").
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp157c-lxa-mc1 board device tree to
keep console in irq mode, as DMA support for console has been removed
from the driver by commit e359b4411c ("serial: stm32: fix threaded
interrupt handling").
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Reviewed-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
DMA configuration is added to uart nodes in stm32mp15x device tree.
Delete uart4 DMA property in stm32mp157a-stinger96 board device tree to
keep console in irq mode, as DMA support for console has been removed
from the driver by commit e359b4411c ("serial: stm32: fix threaded
interrupt handling").
Delete also usart2 and uart7 DMA property to keep current behavior.
Signed-off-by: Erwan Le Ray <erwan.leray@foss.st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@foss.st.com>
