The rtbitmap fsmap backend doesn't query the rmapbt, so it's wasteful to
spend time initializing the rmap_irec objects. Worse yet, the logic to
query the rtbitmap is spread across three separate functions, which is
unnecessarily difficult to follow.
Compute the start rtextent that we want from keys[0] directly and
combine the functions to avoid passing parameters around everywhere, and
consolidate all the logic into a single function. At one point many
years ago I intended to use __xfs_getfsmap_rtdev as the launching point
for realtime rmapbt queries, but this hasn't been the case for a long
time.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
The realtime section ends at the last rt extent. If the user configures
the rt geometry with an extent size that is not an integer factor of the
number of rt blocks, it's possible for there to be rt blocks past the
end of the last rt extent. These tail blocks cannot ever be allocated
and will cause corruption reports if the last extent coincides with the
end of an rt bitmap block, so do not report consider them for the
GETFSMAP output.
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
It's not correct to use the rmap irec structure to hold query key
information to query the rtbitmap because the realtime volume can be
longer than 2^32 fsblocks in length. Because the rt volume doesn't have
allocation groups, introduce a daddr-based record filtering algorithm
and compute the rtextent values using 64-bit variables. The same
problem exists in the external log device fsmap implementation, so use
the same solution to fix it too.
After this patch, all the code that touches info->low and info->high
under xfs_getfsmap_logdev and __xfs_getfsmap_rtdev are unnecessary.
Cleaning this up will be done in subsequent patches.
Fixes: 4c934c7dd6 ("xfs: report realtime space information via the rtbitmap")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
I noticed a bug in ranged GETFSMAP queries:
# xfs_io -c 'fsmap -vvvv' /opt
EXT: DEV BLOCK-RANGE OWNER FILE-OFFSET AG AG-OFFSET TOTAL
0: 8:80 [0..7]: static fs metadata 0 (0..7) 8
<snip>
9: 8:80 [192..223]: 137 0..31 0 (192..223) 32
# xfs_io -c 'fsmap -vvvv -d 208 208' /opt
#
That's not right -- we asked what block maps block 208, and we should've
received a mapping for inode 137 offset 16. Instead, we get nothing.
The root cause of this problem is a mis-interaction between the fsmap
code and how btree ranged queries work. xfs_btree_query_range returns
any btree record that overlaps with the query interval, even if the
record starts before or ends after the interval. Similarly, GETFSMAP is
supposed to return a recordset containing all records that overlap the
range queried.
However, it's possible that the recordset is larger than the buffer that
the caller provided to convey mappings to userspace. In /that/ case,
userspace is supposed to copy the last record returned to fmh_keys[0]
and call GETFSMAP again. In this case, we do not want to return
mappings that we have already supplied to the caller. The call to
xfs_btree_query_range is the same, but now we ignore any records that
start before fmh_keys[0].
Unfortunately, we didn't implement the filtering predicate correctly.
The predicate should only be called when we're calling back for more
records. Accomplish this by setting info->low.rm_blockcount to a
nonzero value and ensuring that it is cleared as necessary. As a
result, we no longer want to adjust dkeys[0] in the main setup function
because that's confusing.
This patch doesn't touch the logdev/rtbitmap backends because they have
bigger problems that will be addressed by subsequent patches.
Found via xfs/556 with parent pointers enabled.
Fixes: e89c041338 ("xfs: implement the GETFSMAP ioctl")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Need to happen before we allocate and then leak the xefi. Found by
coverity via an xfsprogs libxfs scan.
[djwong: This also fixes the type of the @agbno argument.]
Fixes: 7dfee17b13 ("xfs: validate block number being freed before adding to xefi")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
The AGF verifier does not check that the AGF length field is within
known good bounds. This has never been checked by runtime kernel
code (i.e. the lack of verification goes back to 1993) yet we assume
in many places that it is correct and verify other metdata against
it.
Add length verification to the AGF verifier. The length of the AGF
must be equal to the size of the AG specified in the superblock,
unless it is the last AG in the filesystem. In that case, it must be
less than or equal to sb->sb_agblocks and greater than
XFS_MIN_AG_BLOCKS, which is the smallest AG a growfs operation will
allow to exist.
This requires a bit of rework of the verifier function. We want to
verify metadata before we use it to verify other metadata. Hence
we need to verify the AGF sequence numbers before using them to
verify the length of the AGF. Then we can verify the AGF length
before we verify AGFL fields. Then we can verifier other fields that
are bounds limited by the AGF length.
And, finally, by calculating agf_length only once into a local
variable, we can collapse repeated "if (xfs_has_foo() &&"
conditionaly checks into single checks. This makes the code much
easier to follow as all the checks for a given feature are obviously
in the same place.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If the journal geometry results in a sector or log stripe unit
validation problem, it indicates that we cannot set the log up to
safely write to the the journal. In these cases, we must abort the
mount because the corruption needs external intervention to resolve.
Similarly, a journal that is too large cannot be written to safely,
either, so we shouldn't allow those geometries to mount, either.
If the log is too small, we risk having transaction reservations
overruning the available log space and the system hanging waiting
for space it can never provide. This is purely a runtime hang issue,
not a corruption issue as per the first cases listed above. We abort
mounts of the log is too small for V5 filesystems, but we must allow
v4 filesystems to mount because, historically, there was no log size
validity checking and so some systems may still be out there with
undersized logs.
The problem is that on V4 filesystems, when we discover a log
geometry problem, we skip all the remaining checks and then allow
the log to continue mounting. This mean that if one of the log size
checks fails, we skip the log stripe unit check. i.e. we allow the
mount because a "non-fatal" geometry is violated, and then fail to
check the hard fail geometries that should fail the mount.
Move all these fatal checks to the superblock verifier, and add a
new check for the two log sector size geometry variables having the
same values. This will prevent any attempt to mount a log that has
invalid or inconsistent geometries long before we attempt to mount
the log.
However, for the minimum log size checks, we can only do that once
we've setup up the log and calculated all the iclog sizes and
roundoffs. Hence this needs to remain in the log mount code after
the log has been initialised. It is also the only case where we
should allow a v4 filesystem to continue running, so leave that
handling in place, too.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
If the current transaction holds a busy extent and we are trying to
allocate a new extent to fix up the free list, we can deadlock if
the AG is entirely empty except for the busy extent held by the
transaction.
This can occur at runtime processing an XEFI with multiple extents
in this path:
__schedule+0x22f at ffffffff81f75e8f
schedule+0x46 at ffffffff81f76366
xfs_extent_busy_flush+0x69 at ffffffff81477d99
xfs_alloc_ag_vextent_size+0x16a at ffffffff8141711a
xfs_alloc_ag_vextent+0x19b at ffffffff81417edb
xfs_alloc_fix_freelist+0x22f at ffffffff8141896f
xfs_free_extent_fix_freelist+0x6a at ffffffff8141939a
__xfs_free_extent+0x99 at ffffffff81419499
xfs_trans_free_extent+0x3e at ffffffff814a6fee
xfs_extent_free_finish_item+0x24 at ffffffff814a70d4
xfs_defer_finish_noroll+0x1f7 at ffffffff81441407
xfs_defer_finish+0x11 at ffffffff814417e1
xfs_itruncate_extents_flags+0x13d at ffffffff8148b7dd
xfs_inactive_truncate+0xb9 at ffffffff8148bb89
xfs_inactive+0x227 at ffffffff8148c4f7
xfs_fs_destroy_inode+0xb8 at ffffffff81496898
destroy_inode+0x3b at ffffffff8127d2ab
do_unlinkat+0x1d1 at ffffffff81270df1
do_syscall_64+0x40 at ffffffff81f6b5f0
entry_SYSCALL_64_after_hwframe+0x44 at ffffffff8200007c
This can also happen in log recovery when processing an EFI
with multiple extents through this path:
context_switch() kernel/sched/core.c:3881
__schedule() kernel/sched/core.c:5111
schedule() kernel/sched/core.c:5186
xfs_extent_busy_flush() fs/xfs/xfs_extent_busy.c:598
xfs_alloc_ag_vextent_size() fs/xfs/libxfs/xfs_alloc.c:1641
xfs_alloc_ag_vextent() fs/xfs/libxfs/xfs_alloc.c:828
xfs_alloc_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:2362
xfs_free_extent_fix_freelist() fs/xfs/libxfs/xfs_alloc.c:3029
__xfs_free_extent() fs/xfs/libxfs/xfs_alloc.c:3067
xfs_trans_free_extent() fs/xfs/xfs_extfree_item.c:370
xfs_efi_recover() fs/xfs/xfs_extfree_item.c:626
xlog_recover_process_efi() fs/xfs/xfs_log_recover.c:4605
xlog_recover_process_intents() fs/xfs/xfs_log_recover.c:4893
xlog_recover_finish() fs/xfs/xfs_log_recover.c:5824
xfs_log_mount_finish() fs/xfs/xfs_log.c:764
xfs_mountfs() fs/xfs/xfs_mount.c:978
xfs_fs_fill_super() fs/xfs/xfs_super.c:1908
mount_bdev() fs/super.c:1417
xfs_fs_mount() fs/xfs/xfs_super.c:1985
legacy_get_tree() fs/fs_context.c:647
vfs_get_tree() fs/super.c:1547
do_new_mount() fs/namespace.c:2843
do_mount() fs/namespace.c:3163
ksys_mount() fs/namespace.c:3372
__do_sys_mount() fs/namespace.c:3386
__se_sys_mount() fs/namespace.c:3383
__x64_sys_mount() fs/namespace.c:3383
do_syscall_64() arch/x86/entry/common.c:296
entry_SYSCALL_64() arch/x86/entry/entry_64.S:180
To avoid this deadlock, we should not block in
xfs_extent_busy_flush() if we hold a busy extent in the current
transaction.
Now that the EFI processing code can handle requeuing a partially
completed EFI, we can detect this situation in
xfs_extent_busy_flush() and return -EAGAIN rather than going to
sleep forever. The -EAGAIN get propagated back out to the
xfs_trans_free_extent() context, where the EFD is populated and the
transaction is rolled, thereby moving the busy extents into the CIL.
At this point, we can retry the extent free operation again with a
clean transaction. If we hit the same "all free extents are busy"
situation when trying to fix up the free list, we can safely call
xfs_extent_busy_flush() and wait for the busy extents to resolve
and wake us. At this point, the allocation search can make progress
again and we can fix up the free list.
This deadlock was first reported by Chandan in mid-2021, but I
couldn't make myself understood during review, and didn't have time
to fix it myself.
It was reported again in March 2023, and again I have found myself
unable to explain the complexities of the solution needed during
review.
As such, I don't have hours more time to waste trying to get the
fix written the way it needs to be written, so I'm just doing it
myself. This patchset is largely based on Wengang Wang's last patch,
but with all the unnecessary stuff removed, split up into multiple
patches and cleaned up somewhat.
Reported-by: Chandan Babu R <chandanrlinux@gmail.com>
Reported-by: Wengang Wang <wen.gang.wang@oracle.com>
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Extent freeing neeeds to be able to avoid a busy extent deadlock
when the transaction itself holds the only busy extents in the
allocation group. This may occur if we have an EFI that contains
multiple extents to be freed, and the freeing the second intent
requires the space the first extent free released to expand the
AGFL. If we block on the busy extent at this point, we deadlock.
We hold a dirty transaction that contains a entire atomic extent
free operations within it, so if we can abort the extent free
operation and commit the progress that we've made, the busy extent
can be resolved by a log force. Hence we can restart the aborted
extent free with a new transaction and continue to make
progress without risking deadlocks.
To enable this, we need the EFI processing code to be able to handle
an -EAGAIN error to tell it to commit the current transaction and
retry again. This mechanism is already built into the defer ops
processing (used bythe refcount btree modification intents), so
there's relatively little handling we need to add to the EFI code to
enable this.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
To avoid blocking in xfs_extent_busy_flush() when freeing extents
and the only busy extents are held by the current transaction, we
need to pass the XFS_ALLOC_FLAG_FREEING flag context all the way
into xfs_extent_busy_flush().
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Btrees that aren't freespace management trees use the normal extent
allocation and freeing routines for their blocks. Hence when a btree
block is freed, a direct call to xfs_free_extent() is made and the
extent is immediately freed. This puts the entire free space
management btrees under this path, so we are stacking btrees on
btrees in the call stack. The inobt, finobt and refcount btrees
all do this.
However, the bmap btree does not do this - it calls
xfs_free_extent_later() to defer the extent free operation via an
XEFI and hence it gets processed in deferred operation processing
during the commit of the primary transaction (i.e. via intent
chaining).
We need to change xfs_free_extent() to behave in a non-blocking
manner so that we can avoid deadlocks with busy extents near ENOSPC
in transactions that free multiple extents. Inserting or removing a
record from a btree can cause a multi-level tree merge operation and
that will free multiple blocks from the btree in a single
transaction. i.e. we can call xfs_free_extent() multiple times, and
hence the btree manipulation transaction is vulnerable to this busy
extent deadlock vector.
To fix this, convert all the remaining callers of xfs_free_extent()
to use xfs_free_extent_later() to queue XEFIs and hence defer
processing of the extent frees to a context that can be safely
restarted if a deadlock condition is detected.
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
XFS has strict metadata ordering requirements. One of the things it
does is maintain the commit order of items from transaction commit
through the CIL and into the AIL. That is, if a transaction logs
item A before item B in a modification, then they will be inserted
into the CIL in the order {A, B}. These items are then written into
the iclog during checkpointing in the order {A, B}. When the
checkpoint commits, they are supposed to be inserted into the AIL in
the order {A, B}, and when they are pushed from the AIL, they are
pushed in the order {A, B}.
If we crash, log recovery then replays the two items from the
checkpoint in the order {A, B}, resulting in the objects the items
apply to being queued for writeback at the end of the checkpoint
in the order {A, B}. This means recovery behaves the same way as the
runtime code.
In places, we have subtle dependencies on this ordering being
maintained. One of this place is performing intent recovery from the
log. It assumes that recovering an intent will result in a
non-intent object being the first thing that is modified in the
recovery transaction, and so when the transaction commits and the
journal flushes, the first object inserted into the AIL beyond the
intent recovery range will be a non-intent item. It uses the
transistion from intent items to non-intent items to stop the
recovery pass.
A recent log recovery issue indicated that an intent was appearing
as the first item in the AIL beyond the recovery range, hence
breaking the end of recovery detection that exists.
Tracing indicated insertion of the items into the AIL was apparently
occurring in the right order (the intent was last in the commit item
list), but the intent was appearing first in the AIL. IOWs, the
order of items in the AIL was {D,C,B,A}, not {A,B,C,D}, and bulk
insertion was reversing the order of the items in the batch of items
being inserted.
Lucky for us, all the items fed to bulk insertion have the same LSN,
so the reversal of order does not affect the log head/tail tracking
that is based on the contents of the AIL. It only impacts on code
that has implicit, subtle dependencies on object order, and AFAICT
only the intent recovery loop is impacted by it.
Make sure bulk AIL insertion does not reorder items incorrectly.
Fixes: 0e57f6a36f ("xfs: bulk AIL insertion during transaction commit")
Signed-off-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Chandan Babu R <chandan.babu@oracle.com>
Pointers drop_leaf and save_leaf are initialized with values that are never
read, they are being re-assigned later on just before they are used. Remove
the redundant early initializations and keep the later assignments at the
point where they are used. Cleans up two clang scan build warnings:
fs/xfs/libxfs/xfs_attr_leaf.c:2288:29: warning: Value stored to 'drop_leaf'
during its initialization is never read [deadcode.DeadStores]
fs/xfs/libxfs/xfs_attr_leaf.c:2289:29: warning: Value stored to 'save_leaf'
during its initialization is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
I found a corruption during growfs:
XFS (loop0): Internal error agbno >= mp->m_sb.sb_agblocks at line 3661 of
file fs/xfs/libxfs/xfs_alloc.c. Caller __xfs_free_extent+0x28e/0x3c0
CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-20230420-00001-gda8c95746257
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_corruption_error+0x134/0x150
__xfs_free_extent+0x2c1/0x3c0
xfs_ag_extend_space+0x291/0x3e0
xfs_growfs_data+0xd72/0xe90
xfs_file_ioctl+0x5f9/0x14a0
__x64_sys_ioctl+0x13e/0x1c0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
XFS (loop0): Corruption detected. Unmount and run xfs_repair
XFS (loop0): Internal error xfs_trans_cancel at line 1097 of file
fs/xfs/xfs_trans.c. Caller xfs_growfs_data+0x691/0xe90
CPU: 0 PID: 573 Comm: xfs_growfs Not tainted 6.3.0-rc7-next-20230420-00001-gda8c95746257
Call Trace:
<TASK>
dump_stack_lvl+0x50/0x70
xfs_error_report+0x93/0xc0
xfs_trans_cancel+0x2c0/0x350
xfs_growfs_data+0x691/0xe90
xfs_file_ioctl+0x5f9/0x14a0
__x64_sys_ioctl+0x13e/0x1c0
do_syscall_64+0x39/0x80
entry_SYSCALL_64_after_hwframe+0x63/0xcd
RIP: 0033:0x7f2d86706577
The bug can be reproduced with the following sequence:
# truncate -s 1073741824 xfs_test.img
# mkfs.xfs -f -b size=1024 -d agcount=4 xfs_test.img
# truncate -s 2305843009213693952 xfs_test.img
# mount -o loop xfs_test.img /mnt/test
# xfs_growfs -D 1125899907891200 /mnt/test
The root cause is that during growfs, user space passed in a large value
of newblcoks to xfs_growfs_data_private(), due to current sb_agblocks is
too small, new AG count will exceed UINT_MAX. Because of AG number type
is unsigned int and it would overflow, that caused nagcount much smaller
than the actual value. During AG extent space, delta blocks in
xfs_resizefs_init_new_ags() will much larger than the actual value due to
incorrect nagcount, even exceed UINT_MAX. This will cause corruption and
be detected in __xfs_free_extent. Fix it by growing the filesystem to up
to the maximally allowed AGs and not return EINVAL when new AG count
overflow.
Signed-off-by: Long Li <leo.lilong@huawei.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Since commit a2ad63daa8 ("VFS: add FMODE_CAN_ODIRECT file flag") file
systems can just set the FMODE_CAN_ODIRECT flag at open time instead of
wiring up a dummy direct_IO method to indicate support for direct I/O.
Do that for xfs so that noop_direct_IO can eventually be removed.
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Reviewed-by: Darrick J. Wong <djwong@kernel.org>
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
This feature has been baking in upstream for ~10mo with no bug reports.
It seems to work fine here, let's get rid of the scary warnings?
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Reviewed-by: Dave Chinner <dchinner@redhat.com>
Every now and then, xfs/168 fails with this logged in dmesg:
Reserve blocks depleted! Consider increasing reserve pool size.
EXPERIMENTAL online shrink feature in use. Use at your own risk!
Per-AG reservation for AG 1 failed. Filesystem may run out of space.
Per-AG reservation for AG 1 failed. Filesystem may run out of space.
Error -28 reserving per-AG metadata reserve pool.
Corruption of in-memory data (0x8) detected at xfs_ag_shrink_space+0x23c/0x3b0 [xfs] (fs/xfs/libxfs/xfs_ag.c:1007). Shutting down filesystem.
It's silly to deplete the reserved blocks pool just to shrink the
filesystem, particularly since the fs goes down after that.
Fixes: fb2fc17201 ("xfs: support shrinking unused space in the last AG")
Signed-off-by: Darrick J. Wong <djwong@kernel.org>
Pull x86 fix from Borislav Petkov:
- Set up the kernel CS earlier in the boot process in case EFI boots
the kernel after bypassing the decompressor and the CS descriptor
used ends up being the EFI one which is not mapped in the identity
page table, leading to early SEV/SNP guest communication exceptions
resulting in the guest crashing
* tag 'x86_urgent_for_v6.4_rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/head/64: Switch to KERNEL_CS as soon as new GDT is installed
Pull smb server fixes from Steve French:
"Five smb3 server fixes, all also for stable:
- Fix four slab out of bounds warnings: improve checks for protocol
id, and for small packet length, and for create context parsing,
and for negotiate context parsing
- Fix for incorrect dereferencing POSIX ACLs"
* tag '6.4-rc5-smb3-server-fixes' of git://git.samba.org/ksmbd:
ksmbd: validate smb request protocol id
ksmbd: check the validation of pdu_size in ksmbd_conn_handler_loop
ksmbd: fix posix_acls and acls dereferencing possible ERR_PTR()
ksmbd: fix out-of-bound read in parse_lease_state()
ksmbd: fix out-of-bound read in deassemble_neg_contexts()
Pull i2c fixes from Wolfram Sang:
"Biggest news is that Andi Shyti steps in for maintaining the
controller drivers. Thank you very much!
Other than that, one new driver maintainer and the rest is usual
driver bugfixes. at24 has a Kconfig dependecy fix"
* tag 'i2c-for-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
MAINTAINERS: Add entries for Renesas RZ/V2M I2C driver
eeprom: at24: also select REGMAP
i2c: sprd: Delete i2c adapter in .remove's error path
i2c: mv64xxx: Fix reading invalid status value in atomic mode
i2c: designware: fix idx_write_cnt in read loop
i2c: mchp-pci1xxxx: Avoid cast to incompatible function type
i2c: img-scb: Fix spelling mistake "innacurate" -> "inaccurate"
MAINTAINERS: Add myself as I2C host drivers maintainer
Pull soundwire fixes from Vinod Koul:
"Core fix for missing flag clear, error patch handling in qcom driver
and BIOS quirk for HP Spectre x360:
- HP Spectre x360 soundwire DMI quirk
- Error path handling for qcom driver
- Core fix for missing clear of alloc_slave_rt"
* tag 'soundwire-6.4-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: stream: Add missing clear of alloc_slave_rt
soundwire: qcom: add proper error paths in qcom_swrm_startup()
soundwire: dmi-quirks: add new mapping for HP Spectre x360
Pull ARM SoC fixes from Arnd Bergmann:
"Most of the changes this time are for the Qualcomm Snapdragon
platforms.
There are bug fixes for error handling in Qualcomm icc-bwmon,
rpmh-rsc, ramp_controller and rmtfs driver as well as the AMD tee
firmware driver and a missing initialization in the Arm ff-a firmware
driver. The Qualcomm RPMh and EDAC drivers need some rework to work
correctly on all supported chips.
The DT fixes include:
- i.MX8 fixes for gpio, pinmux and clock settings
- ADS touchscreen gpio polarity settings in several machines
- Address dtb warnings for caches, panel and input-enable properties
on Qualcomm platforms
- Incorrect data on qualcomm platforms fir SA8155P power domains,
SM8550 LLCC, SC7180-lite SDRAM frequencies and SM8550 soundwire
- Remoteproc firmware paths are corrected for Sony Xperia 10 IV"
* tag 'arm-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc: (36 commits)
firmware: arm_ffa: Set handle field to zero in memory descriptor
ARM: dts: Fix erroneous ADS touchscreen polarities
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
EDAC/qcom: Get rid of hardcoded register offsets
EDAC/qcom: Remove superfluous return variable assignment in qcom_llcc_core_setup()
arm64: dts: qcom: sm8550: Use the correct LLCC register scheme
dt-bindings: cache: qcom,llcc: Fix SM8550 description
arm64: dts: qcom: sc7180-lite: Fix SDRAM freq for misidentified sc7180-lite boards
arm64: dts: qcom: sm8550: use uint16 for Soundwire interval
soc: qcom: rpmhpd: Add SA8155P power domains
arm64: dts: qcom: Split out SA8155P and use correct RPMh power domains
dt-bindings: power: qcom,rpmpd: Add SA8155P
soc: qcom: Rename ice to qcom_ice to avoid module name conflict
soc: qcom: rmtfs: Fix error code in probe()
soc: qcom: ramp_controller: Fix an error handling path in qcom_ramp_controller_probe()
ARM: dts: at91: sama7g5ek: fix debounce delay property for shdwc
ARM: at91: pm: fix imbalanced reference counter for ethernet devices
arm64: dts: qcom: sm6375-pdx225: Fix remoteproc firmware paths
...
Pull block fixes from Jens Axboe:
- Fix an issue with the hardware queue nr_active, causing it to become
imbalanced (Tian)
- Fix an issue with null_blk not releasing pages if configured as
memory backed (Nitesh)
- Fix a locking issue in dasd (Jan)
* tag 'block-6.4-2023-06-09' of git://git.kernel.dk/linux:
s390/dasd: Use correct lock while counting channel queue length
null_blk: Fix: memory release when memory_backed=1
blk-mq: fix blk_mq_hw_ctx active request accounting
Pull virtio bug fixes from Michael Tsirkin:
"A bunch of fixes all over the place"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
tools/virtio: use canonical ftrace path
vhost_vdpa: support PACKED when setting-getting vring_base
vhost: support PACKED when setting-getting vring_base
vhost: Fix worker hangs due to missed wake up calls
vhost: Fix crash during early vhost_transport_send_pkt calls
vhost_net: revert upend_idx only on retriable error
vhost_vdpa: tell vqs about the negotiated
vdpa/mlx5: Fix hang when cvq commands are triggered during device unregister
tools/virtio: Add .gitignore for ringtest
tools/virtio: Fix arm64 ringtest compilation error
vduse: avoid empty string for dev name
vhost: use kzalloc() instead of kmalloc() followed by memset()
Pull ceph fixes from Ilya Dryomov:
"A fix for a potential data corruption in differential backup and
snapshot-based mirroring scenarios in RBD and a reference counting
fixup to avoid use-after-free in CephFS, all marked for stable"
* tag 'ceph-for-6.4-rc6' of https://github.com/ceph/ceph-client:
ceph: fix use-after-free bug for inodes when flushing capsnaps
rbd: get snapshot context after exclusive lock is ensured to be held
rbd: move RBD_OBJ_FLAG_COPYUP_ENABLED flag setting
The lock around counting the channel queue length in the BIODASDINFO
ioctl was incorrectly changed to the dasd_block->queue_lock with commit
583d6535cb ("dasd: remove dead code"). This can lead to endless list
iterations and a subsequent crash.
The queue_lock is supposed to be used only for queue lists belonging to
dasd_block. For dasd_device related queue lists the ccwdev lock must be
used.
Fix the mentioned issues by correctly using the ccwdev lock instead of
the queue lock.
Fixes: 583d6535cb ("dasd: remove dead code")
Cc: stable@vger.kernel.org # v5.0+
Signed-off-by: Jan Höppner <hoeppner@linux.ibm.com>
Reviewed-by: Stefan Haberland <sth@linux.ibm.com>
Signed-off-by: Stefan Haberland <sth@linux.ibm.com>
Link: https://lore.kernel.org/r/20230609153750.1258763-2-sth@linux.ibm.com
Signed-off-by: Jens Axboe <axboe@kernel.dk>
Pull RISC-V fixes from Palmer Dabbelt:
- A fix to avoid ISA-disallowed privilege mappings that can result from
WRITE+EXEC mmap requests from userspace.
- A fix for kfence to handle the huge pages.
- A fix to avoid converting misaligned VAs to huge pages.
- ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE has been selected so kprobe
can understand user pointers.
* tag 'riscv-for-linus-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: fix kprobe __user string arg print fault issue
riscv: Check the virtual alignment before choosing a map size
riscv: Fix kfence now that the linear mapping can be backed by PUD/P4D/PGD
riscv: mm: Ensure prot of VM_WRITE and VM_EXEC must be readable
Pull s390 fixes from Alexander Gordeev:
- Avoid linker error for randomly generated config file that has
CONFIG_BRANCH_PROFILE_NONE enabled and make it similar to riscv, x86
and also to commit 4bf3ec384e ("s390: disable branch profiling for
vdso").
- Currently, if the device is offline and all the channel paths are
either configured or varied offline, the associated subchannel gets
unregistered. Don't unregister the subchannel, instead unregister
offline device.
* tag 's390-6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux:
s390/purgatory: disable branch profiling
s390/cio: unregister device when the only path is gone
Pull gpio fixes from Bartosz Golaszewski:
"Two fixes for the GPIO testing module and one commit making Andy a
reviewer for the GPIO subsystem:
- fix a memory corruption bug in gpio-sim
- fix inconsistencies in user-space configuration of gpio-sim
- make Andy Shevchenko a reviewer for the GPIO subsystem"
* tag 'gpio-fixes-for-v6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux:
MAINTAINERS: add Andy Shevchenko as reviewer for the GPIO subsystem
gpio: sim: quietly ignore configured lines outside the bank
gpio: sim: fix memory corruption when adding named lines and unnamed hogs
The canonical location for the tracefs filesystem is at /sys/kernel/tracing.
But, from Documentation/trace/ftrace.rst:
Before 4.1, all ftrace tracing control files were within the debugfs
file system, which is typically located at /sys/kernel/debug/tracing.
For backward compatibility, when mounting the debugfs file system,
the tracefs file system will be automatically mounted at:
/sys/kernel/debug/tracing
A few spots in tools/virtio still refer to this older debugfs
path, so let's update them to avoid confusion.
Signed-off-by: Ross Zwisler <zwisler@google.com>
Message-Id: <20230215223350.2658616-6-zwisler@google.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reviewed-by: Mukesh Ojha <quic_mojha@quicinc.com>
Pull pin control fix from Linus Walleij:
"A single fix for the Meson driver, nothing else has surfaced so far
this cycle"
* tag 'pinctrl-v6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl:
pinctrl: meson-axg: add missing GPIOA_18 gpio group
Pull sound fixes from Takashi Iwai:
"Lots of small fixes, and almost all are device-specific.
A few of them are the fixes for the old regressions by the fast kctl
lookups (introduced around 5.19). Others are ASoC simple-card fixes,
selftest compile warning fixes, ASoC AMD quirks, various ASoC codec
fixes as well as usual HD-audio quirks"
* tag 'sound-6.4-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (26 commits)
ALSA: hda/realtek: Enable 4 amplifiers instead of 2 on a HP platform
ALSA: hda: Fix kctl->id initialization
ALSA: gus: Fix kctl->id initialization
ALSA: cmipci: Fix kctl->id initialization
ALSA: ymfpci: Fix kctl->id initialization
ALSA: ice1712,ice1724: fix the kcontrol->id initialization
ALSA: hda/realtek: Add quirk for Clevo NS50AU
ALSA: hda/realtek: Add quirks for Asus ROG 2024 laptops using CS35L41
ALSA: hda/realtek: Add "Intel Reference board" and "NUC 13" SSID in the ALC256
ALSA: hda/realtek: Add Lenovo P3 Tower platform
ALSA: hda/realtek: Add a quirk for HP Slim Desktop S01
selftests: alsa: pcm-test: Fix compiler warnings about the format
ASoC: fsl_sai: Enable BCI bit if SAI works on synchronous mode with BYP asserted
ASoC: simple-card-utils: fix PCM constraint error check
ASoC: cs35l56: Remove NULL check from cs35l56_sdw_dai_set_stream()
ASoC: max98363: limit the number of channel to 1
ASoC: max98363: Removed 32bit support
ASoC: mediatek: mt8195: fix use-after-free in driver remove path
ASoC: mediatek: mt8188: fix use-after-free in driver remove path
ASoC: amd: yc: Add Thinkpad Neo14 to quirks list for acp6x
...
Pull ext4 fix from Ted Ts'o:
"Fix an ext4 regression which breaks remounting r/w file systems that
have the quota feature enabled"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: only check dquot_initialize_needed() when debugging
Revert "ext4: don't clear SB_RDONLY when remounting r/w until quota is re-enabled"
i.MX fixes for 6.4, round 2:
- Fix SPI CS pinmux for the final production version of imx8mn-beacon
board.
- Fix GPIOs for USDHC2 CD and WP signals on imx8qm-mek board.
- Assign default clock rate for i.MX8 LPUARTs to fix UART failure.
* tag 'imx-fixes-6.4-2' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: imx8mn-beacon: Fix SPI CS pinmux
arm64: dts: imx8-ss-dma: assign default clock rate for lpuarts
arm64: dts: imx8qm-mek: correct GPIOs for USDHC2 CD and WP signals
Link: https://lore.kernel.org/r/20230607141312.GU4199@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Pull drm fixes from Dave Airlie:
"Bit busier and a bit more scattered than usual. amdgpu is the main
one, with ivpu and msm having a few fixes, then i915, exynos, ast,
lima, radeon with some misc bits, but overall nothing standing out.
fb-helper:
- Fill in fb-helper vars more correctly
amdgpu:
- S0ix fixes
- GPU reset fixes
- SMU13 fixes
- SMU11 fixes
- Misc Display fixes
- Revert RV/RV2/PCO clock counter changes
- Fix Stoney xclk value
- Fix reserved vram debug info
radeon:
- Fix a potential use after free
i915:
- CDCLK voltage fix for ADL-P
- eDP wake sync pulse fix
- Two error handling fixes to selftests
exynos:
- Fix wrong return in Exynos vidi driver
- Fix use-after-free issue to Exynos g2d driver
ast:
- resume and modeset fixes for ast
ivpu:
- Assorted ivpu fixes
lima:
- lima context destroy fix
msm:
- Fix max segment size to address splat on newer a6xx
- Disable PSR by default w/ modparam to re-enable, since there still
seems to be a lingering issue
- Fix HPD issue
- Fix issue with unitialized GMU mutex"
* tag 'drm-fixes-2023-06-09' of git://anongit.freedesktop.org/drm/drm: (32 commits)
drm/msm/a6xx: initialize GMU mutex earlier
drm/msm/dp: enable HDP plugin/unplugged interrupts at hpd_enable/disable
accel/ivpu: Fix sporadic VPU boot failure
accel/ivpu: Do not use mutex_lock_interruptible
accel/ivpu: Do not trigger extra VPU reset if the VPU is idle
drm/amd/display: Reduce sdp bw after urgent to 90%
drm/amdgpu: change reserved vram info print
drm/amdgpu: fix xclk freq on CHIP_STONEY
drm/radeon: fix race condition UAF in radeon_gem_set_domain_ioctl
Revert "drm/amdgpu: switch to golden tsc registers for raven/raven2"
Revert "drm/amdgpu: Differentiate between Raven2 and Raven/Picasso according to revision id"
Revert "drm/amdgpu: change the reference clock for raven/raven2"
drm/amd/display: add ODM case when looking for first split pipe
drm/amd: Make lack of `ACPI_FADT_LOW_POWER_S0` or `CONFIG_AMD_PMC` louder during suspend path
drm/amd/pm: conditionally disable pcie lane switching for some sienna_cichlid SKUs
drm/amd/pm: Fix power context allocation in SMU13
drm/amdgpu: fix Null pointer dereference error in amdgpu_device_recover_vram
drm/amd: Disallow s0ix without BIOS support again
drm/i915/selftests: Add some missing error propagation
drm/exynos: fix race condition UAF in exynos_g2d_exec_ioctl
...
Pull cgroup fixes from Tejun Heo:
- Fix css_set reference leaks on fork failures
- Fix CPU hotplug locking in cgroup_transfer_tasks() which is used by
cgroup1 cpuset
- Doc update
* tag 'cgroup-for-6.4-rc5-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/cgroup:
cgroup: Documentation: Clarify usage of memory limits
cgroup: always put cset in cgroup_css_set_put_fork
cgroup: fix missing cpus_read_{lock,unlock}() in cgroup_transfer_tasks()
The internal_hpd flag is set to true by dp_bridge_hpd_enable() and set to
false by dp_bridge_hpd_disable() to handle GPIO pinmuxed into DP controller
case. HDP related interrupts can not be enabled until internal_hpd is set
to true. At current implementation dp_display_config_hpd() will initialize
DP host controller first followed by enabling HDP related interrupts if
internal_hpd was true at that time. Enable HDP related interrupts depends on
internal_hpd status may leave system with DP driver host is in running state
but without HDP related interrupts being enabled. This will prevent external
display from being detected. Eliminated this dependency by moving HDP related
interrupts enable/disable be done at dp_bridge_hpd_enable/disable() directly
regardless of internal_hpd status.
Changes in V3:
-- dp_catalog_ctrl_hpd_enable() and dp_catalog_ctrl_hpd_disable()
-- rewording ocmmit text
Changes in V4:
-- replace dp_display_config_hpd() with dp_display_host_start()
-- move enable_irq() at dp_display_host_start();
Changes in V5:
-- replace dp_display_host_start() with dp_display_host_init()
Changes in V6:
-- squash remove enable_irq() and disable_irq()
Fixes: cd198cadde ("drm/msm/dp: Rely on hpd_enable/disable callbacks")
Signed-off-by: Kuogee Hsieh <quic_khsieh@quicinc.com>
Tested-by: Leonard Lausen <leonard@lausen.nl> # on sc7180 lazor
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@linaro.org>
Reviewed-by: Bjorn Andersson <andersson@kernel.org>
Tested-by: Bjorn Andersson <andersson@kernel.org>
Reviewed-by: Abhinav Kumar <quic_abhinavk@quicinc.com>
Link: https://lore.kernel.org/r/1684878756-17830-1-git-send-email-quic_khsieh@quicinc.com
Signed-off-by: Rob Clark <robdclark@chromium.org>
Pull arm64 fixes from Will Deacon:
"Two tiny arm64 fixes for -rc6.
One fixes a build breakage when MAX_ORDER can be nonsensical if
CONFIG_EXPERT=y and the other fixes the address masking for perf's
page fault software events so that it is consistent amongst them:
- Fix build breakage due to bogus MAX_ORDER definitions on !4k pages
- Avoid masking fault address for perf software events"
* tag 'arm64-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
arm64: mm: pass original fault address to handle_mm_fault() in PER_VMA_LOCK block
arm64: Remove the ARCH_FORCE_MAX_ORDER config input prompt
We can race where we have added work to the work_list, but
vhost_task_fn has passed that check but not yet set us into
TASK_INTERRUPTIBLE. wake_up_process will see us in TASK_RUNNING and
just return.
This bug was intoduced in commit f9010dbdce ("fork, vhost: Use
CLONE_THREAD to fix freezer/ps regression") when I moved the setting
of TASK_INTERRUPTIBLE to simplfy the code and avoid get_signal from
logging warnings about being in the wrong state. This moves the setting
of TASK_INTERRUPTIBLE back to before we test if we need to stop the
task to avoid a possible race there as well. We then have vhost_worker
set TASK_RUNNING if it finds work similar to before.
Fixes: f9010dbdce ("fork, vhost: Use CLONE_THREAD to fix freezer/ps regression")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230607192338.6041-3-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
If userspace does VHOST_VSOCK_SET_GUEST_CID before VHOST_SET_OWNER we
can race where:
1. thread0 calls vhost_transport_send_pkt -> vhost_work_queue
2. thread1 does VHOST_SET_OWNER which calls vhost_worker_create.
3. vhost_worker_create will set the dev->worker pointer before setting
the worker->vtsk pointer.
4. thread0's vhost_work_queue will see the dev->worker pointer is
set and try to call vhost_task_wake using not yet set worker->vtsk
pointer.
5. We then crash since vtsk is NULL.
Before commit 6e890c5d50 ("vhost: use vhost_tasks for worker
threads"), we only had the worker pointer so we could just check it to
see if VHOST_SET_OWNER has been done. After that commit we have the
vhost_worker and vhost_task pointer, so we can now hit the bug above.
This patch embeds the vhost_worker in the vhost_dev and moves the work
list initialization back to vhost_dev_init, so we can just check the
worker.vtsk pointer to check if VHOST_SET_OWNER has been done like
before.
Fixes: 6e890c5d50 ("vhost: use vhost_tasks for worker threads")
Signed-off-by: Mike Christie <michael.christie@oracle.com>
Message-Id: <20230607192338.6041-2-michael.christie@oracle.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Reported-by: syzbot+d0d442c22fa8db45ff0e@syzkaller.appspotmail.com
Reviewed-by: Stefano Garzarella <sgarzare@redhat.com>
