Required bump from v5.13-rc3 to v5.14-rc3, and to pick up sysfb compilation fixes.
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
There's two stages of manual upload/invalidate displays:
- just handling dirtyfb and uploading the entire fb all the time
- looking at damage clips
In the latter case we support it through fbdev emulation (with
fb_defio), atomic property, and with the dirtfy clip rects.
Make sure at least the atomic property is set up as the main official
interface for this. Ideally we'd also check that
drm_atomic_helper_dirtyfb() is used and that fbdev defio is set up,
but that's quite a bit harder to do. Ideas very much welcome.
From a cursor audit drivers seem to be getting this right mostly, but
better to make sure. At least no one is bypassing the accessor
function.
v2:
- use drm_warn_once with a meaningful warning string (José)
- don't splat in the atomic check code for everyone (intel-gfx-ci)
Reviewed-by: José Roberto de Souza <jose.souza@intel.com> (v1)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Gwan-gyeong Mun <gwan-gyeong.mun@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Maxime Ripard <mripard@kernel.org>
Cc: Thomas Zimmermann <tzimmermann@suse.de>
Cc: David Airlie <airlied@linux.ie>
Cc: Daniel Vetter <daniel@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210723083457.696939-2-daniel.vetter@ffwll.ch
Finding panel_or_bridge might vary based on associated
DSI devices like DSI panel, bridge, and I2C based DSI
bridge.
1. DSI panels and bridges will invoke the host attach
from probe in order to find the panel_or_bridge.
chipone_probe()
dw_mipi_dsi_host_attach().start
dw_mipi_dsi_panel_or_bridge()
...found the panel_or_bridge...
ltdc_encoder_init().start
dw_mipi_dsi_bridge_attach().start
dw_mipi_dsi_host_attach().start
chipone_attach(). start
chipone_attach(). done
dw_mipi_dsi_host_attach().done
dw_mipi_dsi_bridge_attach(). done
ltdc_encoder_init().done
2. I2C based DSI bridge will invoke the drm_bridge_attach
from bridge attach in order to find the panel_or_bridge.
ltdc_encoder_init().start
dw_mipi_dsi_bridge_attach().start
dw_mipi_dsi_panel_or_bridge()
...found the panel_or_bridge...
dw_mipi_dsi_host_attach().start
sn65dsi83_attach(). start
sn65dsi83_attach(). done
dw_mipi_dsi_host_attach().done
dw_mipi_dsi_bridge_attach(). done
ltdc_encoder_init().done
So, invoke the panel_or_bridge from host attach and
bridge attach in order to find all possible DSI devices.
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Yannick Fertre <yannick.fertre@foss.st.com>
Reviewed-by: Robert Foss <robert.foss@linaro.org>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Robert Foss <robert.foss@linaro.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210704140309.268469-1-jagan@amarulasolutions.com
The Generic System Framebuffers support is built when the COMPILE_TEST
option is enabled. But this wrongly assumes that all the architectures
declare a struct screen_info.
This is true for most architectures, but at least the following do not:
arc, m68k, microblaze, openrisc, parisc and s390.
By attempting to make this compile testeable on all architectures, it
leads to linking errors as reported by the kernel test robot for parisc:
All errors (new ones prefixed by >>):
hppa-linux-ld: drivers/firmware/sysfb.o: in function `sysfb_init':
(.init.text+0x24): undefined reference to `screen_info'
>> hppa-linux-ld: (.init.text+0x28): undefined reference to `screen_info'
To prevent these errors only allow sysfb to be built on systems that are
going to need it, which are x86 BIOS and EFI.
The EFI Kconfig symbol is used instead of (ARM || ARM64 || RISC) because
some of these architectures only declare a struct screen_info if EFI is
enabled. And also, because the SYSFB code is only used for EFI on these
architectures. For !EFI the "simple-framebuffer" device is registered by
OF when parsing the Device Tree Blob (if a DT node for this was defined).
Fixes: d391c58271 ("drivers/firmware: move x86 Generic System Framebuffers support")
Reported-by: kernel test robot <lkp@intel.com>
Signed-off-by: Javier Martinez Canillas <javierm@redhat.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20210727093015.1225107-1-javierm@redhat.com
gcc doesn't care, but clang quite reasonably pointed out that the recent
commit e9ba16e68c ("smpboot: Mark idle_init() as __always_inlined to
work around aggressive compiler un-inlining") did some really odd
things:
kernel/smpboot.c:50:20: warning: duplicate 'inline' declaration specifier [-Wduplicate-decl-specifier]
static inline void __always_inline idle_init(unsigned int cpu)
^
which not only has that duplicate inlining specifier, but the new
__always_inline was put in the wrong place of the function definition.
We put the storage class specifiers (ie things like "static" and
"extern") first, and the type information after that. And while the
compiler may not care, we put the inline specifier before the types.
So it should be just
static __always_inline void idle_init(unsigned int cpu)
instead.
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull powerpc fixes from Michael Ellerman:
- Fix guest to host memory corruption in H_RTAS due to missing nargs
check.
- Fix guest triggerable host crashes due to bad handling of nested
guest TM state.
- Fix possible crashes due to incorrect reference counting in
kvm_arch_vcpu_ioctl().
- Two commits fixing some regressions in KVM transactional memory
handling introduced by the recent rework of the KVM code.
Thanks to Nicholas Piggin, Alexey Kardashevskiy, and Michael Neuling.
* tag 'powerpc-5.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
KVM: PPC: Book3S HV Nested: Sanitise H_ENTER_NESTED TM state
KVM: PPC: Book3S: Fix H_RTAS rets buffer overflow
KVM: PPC: Fix kvm_arch_vcpu_ioctl vcpu_load leak
KVM: PPC: Book3S: Fix CONFIG_TRANSACTIONAL_MEM=n crash
KVM: PPC: Book3S HV P9: Fix guest TM support
Pull timer fixes from Thomas Gleixner:
"A small set of timer related fixes:
- Plug a race between rearm and process tick in the posix CPU timers
code
- Make the optimization to avoid recalculation of the next timer
interrupt work correctly when there are no timers pending"
* tag 'timers-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timers: Fix get_next_timer_interrupt() with no timers pending
posix-cpu-timers: Fix rearm racing against process tick
Pull x86 jump label fix from Thomas Gleixner:
"A single fix for jump labels to prevent the compiler from agressive
un-inlining which results in a section mismatch"
* tag 'locking-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
jump_labels: Mark __jump_label_transform() as __always_inlined to work around aggressive compiler un-inlining
Pull EFI fixes from Thomas Gleixner:
"A set of EFI fixes:
- Prevent memblock and I/O reserved resources to get out of sync when
EFI memreserve is in use.
- Don't claim a non-existing table is invalid
- Don't warn when firmware memory is already reserved correctly"
* tag 'efi-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/mokvar: Reserve the table only if it is in boot services data
efi/libstub: Fix the efi_load_initrd function description
firmware/efi: Tell memblock about EFI iomem reservations
efi/tpm: Differentiate missing and invalid final event log table.
Pull core fix from Thomas Gleixner:
"A single update for the boot code to prevent aggressive un-inlining
which causes a section mismatch"
* tag 'core-urgent-2021-07-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
smpboot: Mark idle_init() as __always_inlined to work around aggressive compiler un-inlining
Pull dma-mapping fix from Christoph Hellwig:
- handle vmalloc addresses in dma_common_{mmap,get_sgtable} (Roman
Skakun)
* tag 'dma-mapping-5.14-1' of git://git.infradead.org/users/hch/dma-mapping:
dma-mapping: handle vmalloc addresses in dma_common_{mmap,get_sgtable}
SoCs like the rk3288 and rk3399 have 3 mipi dphys on them. One is TX-
only, one is RX-only and one can be configured to do either TX or RX.
The RX phy is statically connected to the first Image Signal Processor,
the TX phy is statically connected to the first DSI controller and
the TXRX phy is connected to both the second DSI controller as well
as the second ISP.
The RX dphy is controlled externally through registers in the "General
Register Files", while the other two are controlled through the
"Configuration and Test Interface" inside their DSI controller's
io-memory area.
The Rockchip dw-dsi controller already controls these dphys for the
TX case in the driver, but when we want to also allow configuration
for RX to the ISP from the media subsystem we need to expose phy-
functionality instead.
So add a bit of infrastructure to allow the dsi driver to work as a
phy and make sure it can be only one or the other at a time.
Similarly as the dsi-controller will be part of the drm-graph when
active, add an empty component to the drm-graph when in phy-mode
to make the rest of the drm-graph not wait for it.
Signed-off-by: Heiko Stuebner <heiko.stuebner@theobroma-systems.com>
Tested-by: Sebastian Fricke <sebastian.fricke@posteo.net>
Acked-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20210210111020.2476369-4-heiko@sntech.de
Drop the DRM IRQ midlayer in favor of Linux IRQ interfaces. DRM's
IRQ helpers are mostly useful for UMS drivers. Modern KMS drivers
don't benefit from using it.
v3:
* return error if (ret < 0) (Geert)
* remove duplicate error message (Geert)
v2:
* handle errors in platform_get_irq() (Geert, Sergei)
* store IRQ number in struct shmob_drm_device (Laurent)
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Acked-by: Sam Ravnborg <sam@ravnborg.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20210720080941.23646-1-tzimmermann@suse.de
Pull cifs fixes from Steve French:
"Five cifs/smb3 fixes, including a DFS failover fix, two fallocate
fixes, and two trivial coverity cleanups"
* tag '5.14-rc2-smb3-fixes' of git://git.samba.org/sfrench/cifs-2.6:
cifs: fix fallocate when trying to allocate a hole.
CIFS: Clarify SMB1 code for POSIX delete file
CIFS: Clarify SMB1 code for POSIX Create
cifs: support share failover when remounting
cifs: only write 64kb at a time when fallocating a small region of a file
Pull RISC-V fixes from Palmer Dabbelt:
- properly set the memory size, which fixes 32-bit systems
- allow initrd to load anywhere in memory, rather that restricting it
to the first 256MiB
- fix the 'mem=' parameter on 64-bit systems to properly account for
the maximum supported memory now that the kernel is outside the
linear map
- avoid installing mappings into the last 4KiB of memory, which
conflicts with error values
- avoid the stack from being freed while it is being walked
- a handful of fixes to the new copy to/from user routines
* tag 'riscv-for-linus-5.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: __asm_copy_to-from_user: Fix: Typos in comments
riscv: __asm_copy_to-from_user: Remove unnecessary size check
riscv: __asm_copy_to-from_user: Fix: fail on RV32
riscv: __asm_copy_to-from_user: Fix: overrun copy
riscv: stacktrace: pin the task's stack in get_wchan
riscv: Make sure the kernel mapping does not overlap with IS_ERR_VALUE
riscv: Make sure the linear mapping does not use the kernel mapping
riscv: Fix memory_limit for 64-bit kernel
RISC-V: load initrd wherever it fits into memory
riscv: Fix 32-bit RISC-V boot failure
Pull SCSI fixes from James Bottomley:
"Four fixes, all in drivers, all of which can lead to user visible
problems in certain situations"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: target: Fix NULL dereference on XCOPY completion
scsi: mpt3sas: Transition IOC to Ready state during shutdown
scsi: target: Fix protect handling in WRITE SAME(32)
scsi: iscsi: Fix iface sysfs attr detection
Pull io_uring fixes from Jens Axboe:
- Fix a memory leak due to a race condition in io_init_wq_offload
(Yang)
- Poll error handling fixes (Pavel)
- Fix early fdput() regression (me)
- Don't reissue iopoll requests off release path (me)
- Add a safety check for io-wq queue off wrong path (me)
* tag 'io_uring-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
io_uring: explicitly catch any illegal async queue attempt
io_uring: never attempt iopoll reissue from release path
io_uring: fix early fdput() of file
io_uring: fix memleak in io_init_wq_offload()
io_uring: remove double poll entry on arm failure
io_uring: explicitly count entries for poll reqs
Pull block fixes from Jens Axboe:
- NVMe pull request (Christoph):
- tracing fix (Keith Busch)
- fix multipath head refcounting (Hannes Reinecke)
- Write Zeroes vs PI fix (me)
- drop a bogus WARN_ON (Zhihao Cheng)
- Increase max blk-cgroup policy size, now that mq-deadline
uses it too (Oleksandr)
* tag 'block-5.14-2021-07-24' of git://git.kernel.dk/linux-block:
nvme: set the PRACT bit when using Write Zeroes with T10 PI
nvme: fix nvme_setup_command metadata trace event
nvme: fix refcounting imbalance when all paths are down
nvme-pci: don't WARN_ON in nvme_reset_work if ctrl.state is not RESETTING
block: increase BLKCG_MAX_POLS
Pull i2c fixes from Wolfram Sang:
"Two bugfixes for the I2C subsystem"
* 'i2c/for-current' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mpc: Poll for MCF
misc: eeprom: at24: Always append device id even if label property is set.
Merge misc mm fixes from Andrew Morton:
"15 patches.
VM subsystems affected by this patch series: userfaultfd, kfence,
highmem, pagealloc, memblock, pagecache, secretmem, pagemap, and
hugetlbfs"
* akpm:
hugetlbfs: fix mount mode command line processing
mm: fix the deadlock in finish_fault()
mm: mmap_lock: fix disabling preemption directly
mm/secretmem: wire up ->set_page_dirty
writeback, cgroup: do not reparent dax inodes
writeback, cgroup: remove wb from offline list before releasing refcnt
memblock: make for_each_mem_range() traverse MEMBLOCK_HOTPLUG regions
mm: page_alloc: fix page_poison=1 / INIT_ON_ALLOC_DEFAULT_ON interaction
mm: use kmap_local_page in memzero_page
mm: call flush_dcache_page() in memcpy_to_page() and memzero_page()
kfence: skip all GFP_ZONEMASK allocations
kfence: move the size check to the beginning of __kfence_alloc()
kfence: defer kfence_test_init to ensure that kunit debugfs is created
selftest: use mmap instead of posix_memalign to allocate memory
userfaultfd: do not untag user pointers
Clean up:
The size of 0 will be evaluated in the next step. Not
required here.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa210 ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
Had a bug when converting bytes to bits when the cpu was rv32.
The a3 contains the number of bytes and multiple of 8
would be the bits. The LGREG is holding 2 for RV32 and 3 for
RV32, so to achieve multiple of 8 it must always be constant 3.
The 2 was mistakenly used for rv32.
Signed-off-by: Akira Tsukamoto <akira.tsukamoto@gmail.com>
Fixes: ca6eaaa210 ("riscv: __asm_copy_to-from_user: Optimize unaligned memory access and pipeline stall")
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>
