The update of rate_num/den and msbits were factored out to
fixup_unreferenced_params() function to be called explicitly after the
hw_refine or hw_params procedure. It's called from
snd_pcm_hw_refine_user(), but it's forgotten in the PCM compat ioctl.
This ended up with the incomplete rate_num/den and msbits parameters
when 32bit compat ioctl is used.
This patch adds the missing call in snd_pcm_ioctl_hw_params_compat().
Reported-by: Meng_Cai@novatek.com.cn
Fixes: f9a076bff0 ("ALSA: pcm: calculate non-mask/non-interval parameters always when possible")
Reviewed-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Cc: <stable@vger.kernel.org>
Link: https://lore.kernel.org/r/20230829134344.31588-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A few newly added functions aren't built unless CONFIG_OF is set,
which result in the build failure due to defined-but-not-used errors.
Put "#ifdef CONFIG_OF" around those functions to suppress the build
error.
Fixes: 52ea7c0543 ("ASoC: dwc: i2s: Add StarFive JH7110 SoC support")
Link: https://lore.kernel.org/r/20230828113537.27600-1-tiwai@suse.de
Acked-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Updates for v6.6
The rest of the updates for v6.6, some of the highlights include:
- A big API cleanup from Morimoto-san, rationalising the places we put
functions.
- Lots of work on the SOF framework, AMD and Intel drivers, including a
lot of cleanup and new device support.
- Standardisation of the presentation of jacks from drivers.
- Provision of some generic sound card DT properties.
- Conversion oof more drivers to the maple tree register cache.
- New drivers for AMD Van Gogh, AWInic AW88261, Cirrus Logic cs42l43,
various Intel platforms, Mediatek MT7986, RealTek RT1017 and StarFive
JH7110.
USB-audio driver can still submit URBs while the device is being
disconnected, and it may result in spurious error messages like:
usb 1-2: cannot submit urb (err = -19)
usb 1-2: Unable to submit urb #0: -19 at snd_usb_queue_pending_output_urbs
usb 1-2: cannot submit urb 0, error -19: no device
Although those are harmless, they are just ugly.
This patch tries to avoid spewing such error messages when the device
is already at the disconnected state. It also skips the superfluous
xfer notification, too.
Link: https://lore.kernel.org/r/20230828101924.27107-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
A recent cleanup of soc_dai_link_sanity_check() is responsible for
generating lots of confusing errors before returning -EPROBE_DEFER:
acp5x_mach acp5x_mach.0: ASoC: Component acp5x_i2s_dma.0 not found for link acp5x-8821-play
[...]
acp5x_mach acp5x_mach.0: ASoC: Component spi-VLV1776:00 not found for link acp5x-CS35L41-Stereo
[...]
acp5x_mach acp5x_mach.0: ASoC: Component spi-VLV1776:01 not found for link acp5x-CS35L41-Stereo
Switch back to the initial behaviour of logging those messages on
KERN_DEBUG level instead of KERN_ERR.
While at it, use the correct form of the verb in 'component_not_find'
label.
Fixes: 0e66a2c694 ("ASoC: soc-core.c: cleanup soc_dai_link_sanity_check()")
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com
Link: https://lore.kernel.org/r/20230824193837.369761-1-cristian.ciocaltea@collabora.com
Signed-off-by: Mark Brown <broonie@kernel.org
Current audio-graph-card functions definition are like below
(A)' static int graph_get_dais_count();
(B) int audio_graph_parse_of(...)
{
...
(A) ret = graph_get_dais_count();
...
}
(A) static int graph_get_dais_count(...)
{
...
}
(C)
We don't need to have (A)' definition if audio_graph_parse_of() (B) was
defined at (C). This patch moves (B) to (C).
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com
Link: https://lore.kernel.org/r/87r0ntmc3c.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org
When the UMP Endpoint is declared as "static", that is, no dynamic
reassignment of UMP Groups, it makes little sense to expose always all
16 groups with 16 substreams. Many of those substreams are disabled
groups, hence they are useless, but applications don't know it and try
to open / access all those substreams unnecessarily.
This patch limits the number of UMP legacy rawmidi substreams only to
the active groups. The behavior is changed only for the static
endpoint (i.e. devices without UMP v1.1 feature implemented or with
the static block flag is set).
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-4-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
To make it clearer which legacy substream corresponds to which UMP
group, fill the subname field of each substream object with the group
number and the endpoint name, e.g. "Group 1 (My Device)".
Ideally speaking, we should have some better link information to the
derived UMP, but it's another feature extension.
Fixes: 0b5288f5fe ("ALSA: ump: Add legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-3-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The legacy rawmidi devices are the shadows of the main UMP devices,
hence it's better to initialize them after all UMP Endpoints are
parsed. Then, at the moment the legacy rawmidi is created, we already
know the static flag or the proper EP name string, and we can fill
those information at UMP core side instead of fiddling the attributes
at a later point.
Fixes: ec362b63c4 ("ALSA: usb-audio: Enable the legacy raw MIDI support")
Link: https://lore.kernel.org/r/20230824075108.29958-2-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Before committing 79597c8bf6, *rac97 always be NULL if there is
an error. When error happens, make sure *rac97 is NULL is safer.
For examble, in snd_vortex_mixer():
err = snd_ac97_mixer(pbus, &ac97, &vortex->codec);
vortex->isquad = ((vortex->codec == NULL) ?
0 : (vortex->codec->ext_id&0x80));
If error happened but vortex->codec isn't NULL, this may cause some
problems.
Move the judgement order to be clearer and better.
Fixes: 79597c8bf6 ("ALSA: ac97: Fix possible NULL dereference in snd_ac97_mixer")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Acked-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Su Hui <suhui@nfschina.com>
Link: https://lore.kernel.org/r/20230823025212.1000961-1-suhui@nfschina.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Add pause push/release support to the virtual PCM test driver. Add
'suspend' boolean field to the pcmtst_buf_iter structure, so we can
pause the timer without shutting it down. Update the trigger callback
handler correspondingly. Extract buffer initialization to the
'reset_buf_iterator' function since it is used in multiple places now.
Signed-off-by: Ivan Orlov <ivan.orlov0322@gmail.com>
Link: https://lore.kernel.org/r/20230822150541.8450-1-ivan.orlov0322@gmail.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
ASoC: Fixes for v6.5
A relatively large but generally not super urgent set of fixes for ASoC,
including some quirks and a MAINTAINERS update. There's also an update
to cs35l56 to change the firmware ABI, there are no current shipping
systems which use the current interface and the sooner we get the new
interface in the less likely it is that something will start.
It'd be nice if these landed for v6.5 but not the end of the world if
they wait till v6.6.
clang warns (or errors with CONFIG_WERROR=y):
sound/soc/codecs/cs42l43.c:1371:2: error: variable 'ret' is used uninitialized whenever switch default is taken [-Werror,-Wsometimes-uninitialized]
1371 | default:
| ^~~~~~~
sound/soc/codecs/cs42l43.c:1377:9: note: uninitialized use occurs here
1377 | return ret;
| ^~~
sound/soc/codecs/cs42l43.c:1349:9: note: initialize the variable 'ret' to silence this warning
1349 | int ret;
| ^
| = 0
1 error generated.
Initialize ret to 0 in the default case, as there was nothing to do for
other event types.
Closes: https://github.com/ClangBuiltLinux/linux/issues/1922
Fixes: fc918cbe87 ("ASoC: cs42l43: Add support for the cs42l43")
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Link: https://lore.kernel.org/r/20230823-cs42l43_pll_ev-init-ret-v1-1-5836f1ad5dad@kernel.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Xingyu Wu <xingyu.wu@starfivetech.com>:
This patch series adds I2S support for the StarFive JH7110 RISC-V
SoC based on Designware I2S controller. There has three I2S channels
(RX/TX0/TX1) on the JH7110 SoC, one of which is for record(RX) and
two for playback(TX).
The first patch adds support for the StarFive JH7110 SoC in the
Designware I2S bindings.
The second patch adds the ops to get data from platform bus in the
I2S driver.
The third patch adds support for the StarFive JH7110 SoC in
the Designware I2S driver.
The fourth patch fixes the name of I2STX1 pinmux.
The last patch adds device node of I2S RX/TX0/TX1 in JH7110 dts.
This patch series is based on Linux-next(20230818) which is merge
clock, syscon and dma nodes for the StarFive JH7110 SoC.
The series has been tested and works normally on the VisionFive 2
board by plugging an audio expansion board.
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
Renesas Sound has ADG for clock control. Basically it needs
accurately divisible external input clock. But sometimes
sometimes it doesn't have to be accurate for some reason.
We can use ADG clk_i for such case. It came from CPG as
very high rate clock, but is not accurately divisible for
48kHz/44.1kHz rate, but enough for approximate rate.
This patch set support such use case.
Add StarFive JH7110(TX0/TX1/RX channels) SoC support in the
designware I2S driver and a flag to check if it is on the JH7110 SoC.
These channels need to enable clocks, resets and syscon register on the
JH7110 SoC. So add init ops in platform data for the JH7110 SoC to do this.
Their resets should be deassert before changing the parent of clocks so
these are done in the init ops of platform data.
The I2S controllers use DMA controller by platform data on the JH7110
and their settings about snd_dmaengine_dai_dma_data() should be added
in the dw_configure_dai_by_pd(). And use dmaengine PCM registration if
these do not have IRQ on the JH7110 SoC.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Link: https://lore.kernel.org/r/20230821144151.207339-4-xingyu.wu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add the StarFive JH7110 (TX0/TX1/RX channel) SoC support in the bindings
of Designware I2S controller. The I2S controller needs two reset items
to work properly on the JH7110 SoC. And TX0 channel as master mode needs
5 clock items and TX1/RX channels as slave mode need 9 clock items on
the JH7110 SoC. The RX channel needs System Register Controller property
to enable it and other platforms do not need it.
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://lore.kernel.org/r/20230821144151.207339-2-xingyu.wu@starfivetech.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Current adg has default division for BRRA/BRRB, but it was created at
very beginning of the driver implementation, and is now an unnecessary
settings.
Because it has this default division, unexpected clockout might
be selected. For example if it requests only 44.1kHz base clockout,
unrequested 48kHz base clockout also will be selected.
This patch remove default division of clock out
Reported-by: Vincenzo De Michele <vincenzo.michele@davinci.de>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://lore.kernel.org/r/87il96zlep.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
DSP_SW_INTR_STAT_OFFSET is a common interrupt register which will be
accessed by both ACP firmware and driver. This register contains register
bits corresponds to host to dsp interrupts and vice versa.
when dsp to host interrupt is reported, only clear dsp to host
interrupt bit in DSP_SW_INTR_STAT_OFFSET.
Fixes: 2e7c6652f9 ("ASoC: SOF: amd: Fix for handling spurious interrupts from DSP")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://lore.kernel.org/r/20230823073340.2829821-7-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
