Heiner Kallweit says:
====================
net: phy: realtek: improve MMD register access for internal PHY's
The integrated PHYs on chip versions from RTL8168g allow to address
MDIO_MMD_VEND2 registers. All c22 standard registers are mapped to
MDIO_MMD_VEND2 registers. So far the paging mechanism is used to
address PHY registers. Add support for c45 ops to address MDIO_MMD_VEND2
registers directly, w/o the paging.
====================
Link: https://patch.msgid.link/c6a969ef-fd7f-48d6-8c48-4bc548831a8d@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The integrated PHYs on chip versions from RTL8168g allow to address
MDIO_MMD_VEND2 registers. All c22 standard registers are mapped to
MDIO_MMD_VEND2 registers. So far the paging mechanism is used to
address PHY registers. Add support for c45 ops to address MDIO_MMD_VEND2
registers directly, w/o the paging.
Signed-off-by: Heiner Kallweit <hkallweit1@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Link: https://patch.msgid.link/d6f97eaa-0f13-468f-89cb-75a41087bc4a@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King says:
====================
net: phylink,xpcs,stmmac: support PCS EEE configuration
This series adds support for phylink managed EEE at the PCS level,
allowing xpcs_config_eee() to be removed. Sadly, we still end up with
a XPCS specific function to configure the clock multiplier.
====================
Link: https://patch.msgid.link/Z6naiPpxfxGr1Ic6@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There is now no need to pass the mult_fact into xpcs_config_eee(), so
let's remove that argument and use xpcs->eee_mult_fact directly. While
changing the function signature, as we pass true/false for enable, use
"bool" instead of "int" for this.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQY-003w7U-IG@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a function to separate out the EEE clock multiplying factor. This
will be called by the stmmac driver to configure this value.
It would have been better had the driver used the CLK API to retrieve
this clock, get its rate and calculate the appropriate multiplier, but
that door has closed.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ8-003w70-VT@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are hooks in the stmmac driver into XPCS to control the EEE
settings when LPI is configured at the MAC. This bypasses the layering.
To allow this to be removed from the stmmac driver, add two new
methods for PCS to inform them when the LPI/EEE enablement state
changes at the MAC.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Link: https://patch.msgid.link/E1thRQ3-003w6u-RH@rmk-PC.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Eric Dumazet says:
====================
inet: better inet_sock_set_state() for passive flows
Small series to make inet_sock_set_state() more interesting for
LISTEN -> TCP_SYN_RECV changes : The 4-tuple parts are now correct.
First patch is a cleanup.
====================
Link: https://patch.msgid.link/20250212131328.1514243-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Current inet_sock_set_state trace from inet_csk_clone_lock() is missing
many details :
... sock:inet_sock_set_state: family=AF_INET6 protocol=IPPROTO_TCP \
sport=4901 dport=0 \
saddr=127.0.0.6 daddr=0.0.0.0 \
saddrv6=:: daddrv6=:: \
oldstate=TCP_LISTEN newstate=TCP_SYN_RECV
Only the sport gives the listener port, no other parts of the n-tuple are correct.
In this patch, I initialize relevant fields of the new socket before
calling inet_sk_set_state(newsk, TCP_SYN_RECV).
We now have a trace including all the source/destination bits.
... sock:inet_sock_set_state: family=AF_INET6 protocol=IPPROTO_TCP \
sport=4901 dport=47648 \
saddr=127.0.0.6 daddr=127.0.0.6 \
saddrv6=2002:a05:6830:1f85:: daddrv6=2001:4860:f803:65::3 \
oldstate=TCP_LISTEN newstate=TCP_SYN_RECV
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kuniyuki Iwashima <kuniyu@amazon.com>
Link: https://patch.msgid.link/20250212131328.1514243-3-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
For GSO packets, skb_cow_head() will reallocate the skb for TSO header
cloned skbs in airoha_dev_xmit(). For this reason, sinfo pointer can be
no more valid. Fix the issue relying on skb_shinfo() macro directly in
airoha_dev_xmit().
The problem exists since
commit 23020f0493 ("net: airoha: Introduce ethernet support for EN7581 SoC")
but it is not a user visible, since we can't currently enable TSO
for DSA user ports since we are missing to initialize net_device
vlan_features field.
Reviewed-by: Mateusz Polchlopek <mateusz.polchlopek@intel.com>
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Link: https://patch.msgid.link/20250213-airoha-en7581-flowtable-offload-v4-1-b69ca16d74db@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Jakub Kicinski:
"Including fixes from netfilter, wireless and bluetooth.
Kalle Valo steps down after serving as the WiFi driver maintainer for
over a decade.
Current release - fix to a fix:
- vsock: orphan socket after transport release, avoid null-deref
- Bluetooth: L2CAP: fix corrupted list in hci_chan_del
Current release - regressions:
- eth:
- stmmac: correct Rx buffer layout when SPH is enabled
- iavf: fix a locking bug in an error path
- rxrpc: fix alteration of headers whilst zerocopy pending
- s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
- Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
Current release - new code bugs:
- rxrpc: fix ipv6 path MTU discovery, only ipv4 worked
- pse-pd: fix deadlock in current limit functions
Previous releases - regressions:
- rtnetlink: fix netns refleak with rtnl_setlink()
- wifi: brcmfmac: use random seed flag for BCM4355 and BCM4364
firmware
Previous releases - always broken:
- add missing RCU protection of struct net throughout the stack
- can: rockchip: bail out if skb cannot be allocated
- eth: ti: am65-cpsw: base XDP support fixes
Misc:
- ethtool: tsconfig: update the format of hwtstamp flags, changes the
uAPI but this uAPI was not in any release yet"
* tag 'net-6.14-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (72 commits)
net: pse-pd: Fix deadlock in current limit functions
rxrpc: Fix ipv6 path MTU discovery
Reapply "net: skb: introduce and use a single page frag cache"
s390/qeth: move netif_napi_add_tx() and napi_enable() from under BH
mlxsw: Add return value check for mlxsw_sp_port_get_stats_raw()
ipv6: mcast: add RCU protection to mld_newpack()
team: better TEAM_OPTION_TYPE_STRING validation
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
net: ethernet: ti: am65_cpsw: fix tx_cleanup for XDP case
net: ethernet: ti: am65-cpsw: fix RX & TX statistics for XDP_TX case
net: ethernet: ti: am65-cpsw: fix memleak in certain XDP cases
vsock/test: Add test for SO_LINGER null ptr deref
vsock: Orphan socket after transport release
MAINTAINERS: Add sctp headers to the general netdev entry
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
iavf: Fix a locking bug in an error path
rxrpc: Fix alteration of headers whilst zerocopy pending
net: phylink: make configuring clock-stop dependent on MAC support
...
Pull btrfs fixes from David Sterba:
- fix stale page cache after race between readahead and direct IO write
- fix hole expansion when writing at an offset beyond EOF, the range
will not be zeroed
- use proper way to calculate offsets in folio ranges
* tag 'for-6.14-rc2-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: fix hole expansion when writing at an offset beyond EOF
btrfs: fix stale page cache after race between readahead and direct IO write
btrfs: fix two misuses of folio_shift()
Pull bcachefs fixes from Kent Overstreet:
"Just small stuff.
As a general announcement, on disk format is now frozen in my master
branch - future on disk format changes will be optional, not required.
- More fixes for going read-only: the previous fix was insufficient,
but with more work on ordering journal reclaim flushing (and a
btree node accounting fix so we don't split until we have to) the
tiering_replication test now consistently goes read-only in less
than a second.
- fix for fsck when we have reflink pointers to missing indirect
extents
- some transaction restart handling fixes from Alan; the "Pass
_orig_restart_count to trans_was_restarted" likely fixes some rare
undefined behaviour heisenbugs"
* tag 'bcachefs-2025-02-12' of git://evilpiepirate.org/bcachefs:
bcachefs: Reuse transaction
bcachefs: Pass _orig_restart_count to trans_was_restarted
bcachefs: CONFIG_BCACHEFS_INJECT_TRANSACTION_RESTARTS
bcachefs: Fix want_new_bset() so we write until the end of the btree node
bcachefs: Split out journal pins by btree level
bcachefs: Fix use after free
bcachefs: Fix marking reflink pointers to missing indirect extents
Fix a deadlock in pse_pi_get_current_limit and pse_pi_set_current_limit
caused by consecutive mutex_lock calls. One in the function itself and
another in pse_pi_get_voltage.
Resolve the issue by using the unlocked version of pse_pi_get_voltage
instead.
Fixes: e0a5e2bba3 ("net: pse-pd: Use power limit at driver side instead of current limit")
Signed-off-by: Kory Maincent <kory.maincent@bootlin.com>
Link: https://patch.msgid.link/20250212151751.1515008-1-kory.maincent@bootlin.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Luiz Augusto von Dentz says:
====================
bluetooth pull request for net:
- btintel_pcie: Fix a potential race condition
- L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
- L2CAP: Fix corrupted list in hci_chan_del
* tag 'for-net-2025-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth:
Bluetooth: L2CAP: Fix corrupted list in hci_chan_del
Bluetooth: btintel_pcie: Fix a potential race condition
Bluetooth: L2CAP: Fix slab-use-after-free Read in l2cap_send_cmd
====================
Link: https://patch.msgid.link/20250213162446.617632-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pablo Neira Ayuso says:
====================
Netfilter fixes for net
The following batch contains one revert for:
1) Revert flowtable entry teardown cycle when skbuff exceeds mtu to
deal with DF flag unset scenarios. This is reverts a patch coming
in the previous merge window (available in 6.14-rc releases).
* tag 'nf-25-02-13' of git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf:
Revert "netfilter: flowtable: teardown flow if cached mtu is stale"
====================
Link: https://patch.msgid.link/20250213100502.3983-1-pablo@netfilter.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull LoongArch fixes from Huacai Chen:
"Fix bugs about idle, kernel_page_present(), IP checksum and KVM, plus
some trival cleanups"
* tag 'loongarch-fixes-6.14-1' of git://git.kernel.org/pub/scm/linux/kernel/git/chenhuacai/linux-loongson:
LoongArch: KVM: Set host with kernel mode when switch to VM mode
LoongArch: KVM: Remove duplicated cache attribute setting
LoongArch: KVM: Fix typo issue about GCFG feature detection
LoongArch: csum: Fix OoB access in IP checksum code for negative lengths
LoongArch: Remove the deprecated notifier hook mechanism
LoongArch: Use str_yes_no() helper function for /proc/cpuinfo
LoongArch: Fix kernel_page_present() for KPRANGE/XKPRANGE
LoongArch: Fix idle VS timer enqueue
Pull x86 platform driver fixes from Ilpo Järvinen:
- thinkpad_acpi:
- Fix registration of tpacpi platform driver
- Support fan speed in ticks per revolution (Thinkpad X120e)
- Support V9 DYTC profiles (new Thinkpad AMD platforms)
- int3472: Handle GPIO "enable" vs "reset" variation (ov7251)
* tag 'platform-drivers-x86-v6.14-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86: thinkpad_acpi: Fix registration of tpacpi platform driver
platform/x86: int3472: Call "reset" GPIO "enable" for INT347E
platform/x86: int3472: Use correct type for "polarity", call it gpio_flags
platform/x86: thinkpad_acpi: Support for V9 DYTC platform profiles
platform/x86: thinkpad_acpi: Fix invalid fan speed on ThinkPad X120e
mld_newpack() can be called without RTNL or RCU being held.
Note that we no longer can use sock_alloc_send_skb() because
ipv6.igmp_sk uses GFP_KERNEL allocations which can sleep.
Instead use alloc_skb() and charge the net->ipv6.igmp_sk
socket under RCU protection.
Fixes: b8ad0cbc58 ("[NETNS][IPV6] mcast - handle several network namespace")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250212141021.1663666-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
On HCI_OP_RESET command, firmware raises alive interrupt. Driver needs
to wait for this before sending other command. This patch fixes the potential
miss of alive interrupt due to which HCI_OP_RESET can timeout.
Expected flow:
If tx command is HCI_OP_RESET,
1. set data->gp0_received = false
2. send HCI_OP_RESET
3. wait for alive interrupt
Actual flow having potential race:
If tx command is HCI_OP_RESET,
1. send HCI_OP_RESET
1a. Firmware raises alive interrupt here and in ISR
data->gp0_received is set to true
2. set data->gp0_received = false
3. wait for alive interrupt
Signed-off-by: Kiran K <kiran.k@intel.com>
Fixes: 05c200c8f0 ("Bluetooth: btintel_pcie: Add handshake between driver and firmware")
Reported-by: Bjorn Helgaas <helgaas@kernel.org>
Closes: https://patchwork.kernel.org/project/bluetooth/patch/20241001104451.626964-1-kiran.k@intel.com/
Signed-off-by: Luiz Augusto von Dentz <luiz.von.dentz@intel.com>
