When formatting the dynamic USB device IDs to show to
the user space, instead of scnprintf() function use
sysfs_emit_at(). The functions are equivalent, but
using the latter is recommended as it ensures that
no buffer overruns occur.
Testing the change can be done by assigning new IDs
to the USB driver's sysfs attribute new_id,
and then checking that the same values are returned.
For example:
echo 4533 7515 > /sys/bus/usb/drivers/usbfs/new_id
cat /sys/bus/usb/drivers/usbfs/new_id
The output should match the assigned IDs (4533 7515).
Signed-off-by: Hanne-Lotta Mäenpää <hannelotta@gmail.com>
Link: https://lore.kernel.org/r/20250621164005.4004-1-hannelotta@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Add irq_hpd sysfs node to displayport driver. This allows the userspace
to subscribe to irq events similar to how it can subscribe to changes in
hpd.
irq_hpd is read only and returns the number of irq events generated since
driver probe. pending_irq_hpd is added so that a sysfs_emit can be
generated if the HPD high event belonging to the same status message
is delayed until a successful configuration.
Signed-off-by: RD Babiera <rdbabiera@google.com>
Reviewed-by: Badhri Jagan Sridharan <badhri@google.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250623204947.732915-2-rdbabiera@google.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The macro was introduced in commit 69cb1ec4ce ("mxc_udc: add
workaround for ENGcm09152 for i.MX35") on 2010-10-15, but its prefix was
misspelled as **FLS_** instead of the usual **FSL_**.
Its last in-tree user disappeared with commit a390bef7db ("usb:
gadget: fsl_mxc_udc: Remove the driver") on 2020-12-10, so the macro has
been completely unused since then.
Remove the dead and wrongly named definition.
Signed-off-by: RubenKelevra <rubenkelevra@gmail.com>
Link: https://lore.kernel.org/r/20250618164743.1916838-1-rubenkelevra@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
ERR051725:
USB: With the USB controller configured as device mode, Clearing the RS
bit of USBCMD register fails to cause USB device to be detached
Description
1. USB controller working as high speed device mode with USB gadget
function enabled
2. Cable plugged into USB host
3. Use case is software-controlled detach from USB device side
The expected result is device side terminations removed, increase in USB
signal amplitude, USB host detect device is detached. But the issue is
that the clear RS bit of USBCMD register cannot cause device detach event.
Workaround
- Use the below steps to detach from the host:
write USBCMD.RS = 0b
write CTRL2[7:6] = 01b
write CTRL2[8] = 1b
- As CTRL2[8] is set at detach case, so attach the steps should add clear
CTRL2[8]:
write USBCMD.RS = 1b
write CTRL2[8] = 0b
Signed-off-by: Xu Yang <xu.yang_2@nxp.com>
Acked-by: Peter Chen <peter.chen@kernel.org>
Link: https://lore.kernel.org/r/20250614125645.207732-4-xu.yang_2@nxp.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Checking for the endpoint type is no reason for a WARN, as that can
cause a reboot. A driver not checking the endpoint type must not cause a
reboot, as there is just no point in this. We cannot prevent a device
from doing something incorrect as a reaction to a transfer. Hence
warning for a mere assumption being wrong is not sensible.
Signed-off-by: Oliver Neukum <oneukum@suse.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250612122149.2559724-1-oneukum@suse.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the dynamic device name instead of the hardcoded string "at91"
when creating the OHCI host controller driver.
This ensures that the device name is more flexible
and correctly reflects the actual device in the system.
This will be in sync with ehci at91 driver.
Before this patch:
[root@sam9x75eb ~]$ dmesg | grep usb
[ 1.464487] usb usb1: Manufacturer: Linux 6.16.0-rc2 ehci_hcd
[ 1.470210] usb usb1: SerialNumber: 700000.usb-ehci
[ 1.595683] usb usb2: Manufacturer: Linux 6.16.0-rc2 ohci_hcd
[ 1.601406] usb usb2: SerialNumber: at91
After this patch:
[root@sam9x75eb ~]$ dmesg | grep usb
[ 1.464487] usb usb1: Manufacturer: Linux 6.16.0-rc2 ehci_hcd
[ 1.470210] usb usb1: SerialNumber: 700000.usb-ehci
[ 1.595683] usb usb2: Manufacturer: Linux 6.16.0-rc2 ohci_hcd
[ 1.601406] usb usb2: SerialNumber: 600000.usb-ohci
Signed-off-by: Mihai Sain <mihai.sain@microchip.com>
Acked-by: Alan Stern <stern@rowland.harvard.edu>
Link: https://lore.kernel.org/r/20250616061759.3384-2-mihai.sain@microchip.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
usb_remove_config() was added in 2012's
commit Fixes: 51cce6fc15 ("usb: gadget: composite: Add
usb_remove_config")
but has remained unused.
I see there was a use in drivers/staging/cch that
was removed by
commit 515e6dd20b ("Staging: ccg: delete it from the tree")
but it had it's own copy of usb_remove_config()
Remove it.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250608233338.179894-3-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
tegra_ehci_phy_restore_start() and tegra_ehci_phy_restore_end()
last use was removed in 2013 by
commit a4faa54e3a ("USB: EHCI: tegra: remove all power management")
tegra_usb_phy_preresume() and tegra_usb_phy_postresume() last
use was removed in 2020 by
commit c3590c7656 ("usb: host: ehci-tegra: Remove the driver")
(Although that one makes me wonder how much of the rest of the file
is actually used)
Remove both sets.
Signed-off-by: "Dr. David Alan Gilbert" <linux@treblig.org>
Link: https://lore.kernel.org/r/20250603203905.279307-1-linux@treblig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When the gpio irqchip connected to a slow bus(e.g., i2c bus or virtio
bus), calling disable_irq_nosync() in top-half ISR handler will trigger
the following kernel BUG:
BUG: scheduling while atomic: RenderEngine/253/0x00010002
...
Call trace:
dump_backtrace+0x0/0x1c8
show_stack+0x1c/0x2c
dump_stack_lvl+0xdc/0x12c
dump_stack+0x1c/0x64
__schedule_bug+0x64/0x80
schedule_debug+0x98/0x118
__schedule+0x68/0x704
schedule+0xa0/0xe8
schedule_timeout+0x38/0x124
wait_for_common+0xa4/0x134
wait_for_completion+0x1c/0x2c
_virtio_gpio_req+0xf8/0x198
virtio_gpio_irq_bus_sync_unlock+0x94/0xf0
__irq_put_desc_unlock+0x50/0x54
disable_irq_nosync+0x64/0x94
fusb302_irq_intn+0x24/0x84
__handle_irq_event_percpu+0x84/0x278
handle_irq_event+0x64/0x14c
handle_level_irq+0x134/0x1d4
generic_handle_domain_irq+0x40/0x68
virtio_gpio_event_vq+0xb0/0x130
vring_interrupt+0x7c/0x90
vm_interrupt+0x88/0xd8
__handle_irq_event_percpu+0x84/0x278
handle_irq_event+0x64/0x14c
handle_fasteoi_irq+0x110/0x210
__handle_domain_irq+0x80/0xd0
gic_handle_irq+0x78/0x154
el0_irq_naked+0x60/0x6c
This patch replaces request_irq() with devm_request_threaded_irq() to
avoid the use of disable_irq_nosync().
Signed-off-by: Yongbo Zhang <giraffesnn123@gmail.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
Link: https://lore.kernel.org/r/20250526043433.673097-1-giraffesnn123@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
When multiple Apple devices are connected concurrently, the
apple-mfi-fastcharge driver fails to probe the subsequent devices with
the following error:
sysfs: cannot create duplicate filename '/class/power_supply/apple_mfi_fastcharge'
apple-mfi-fastcharge 5-2.4.3.3: probe of 5-2.4.3.3 failed with error -17
This happens because the driver uses a fixed power supply name
("apple_mfi_fastcharge") for all devices, causing a sysfs name
conflict when a second device is connected.
Fix this by generating unique names using the USB bus and device
number (e.g., "apple_mfi_fastcharge_5-12"). This ensures each
connected device gets a unique power supply entry in sysfs.
The change requires storing a copy of the power_supply_desc structure
in the per-device mfi_device struct, since the name pointer needs to
remain valid for the lifetime of the power supply registration.
Fixes: 249fa8217b ("USB: Add driver to control USB fast charge for iOS devices")
Signed-off-by: Charalampos Mitrodimas <charmitro@posteo.net>
Link: https://lore.kernel.org/r/20250602-apple-mfi-fastcharge-duplicate-sysfs-v1-1-5d84de34fac6@posteo.net
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Adds a shutdown callback to ensure that the XHCI stack is properly
shutdown in reboot/shutdown path.
In kexec flow, kernel_restart_prepare() performs actions necessary
to prepare the system for a restart and invokes device_shutdown. To
ensure proper shutdown attach the dwc3 shutdown implementation which
mirrors the remove method.
$ kexec -e
<snip>
xhci-hcd xhci-hcd.0.auto: remove, state 1
usb usb1: USB disconnect, device number 1
usb 1-1: USB disconnect, device number 6
xhci-hcd xhci-hcd.0.auto: USB bus 1 deregistered
kexec_core: Starting new kernel
Signed-off-by: Radhey Shyam Pandey <radhey.shyam.pandey@amd.com>
Acked-by: Thinh Nguyen <Thinh.Nguyen@synopsys.com>
Link: https://lore.kernel.org/r/1748977771-714153-1-git-send-email-radhey.shyam.pandey@amd.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Several configfs usage snippets forget to be formatted as literal code
blocks. These were outputted in htmldocs output as normal paragraph
instead. In particular, snippet for custom string descriptors as added
in 15a7cf8caa ("usb: gadget: configfs: Support arbitrary string
descriptors") is shown as single combined paragraph, rather than two
command lines.
Wrap them like the rest of snippets.
Fixes: 5e654a4655 ("Documentation/usb: gadget_configfs")
Fixes: d80b5005c5 ("docs: usb: convert documents to ReST")
Fixes: 15a7cf8caa ("usb: gadget: configfs: Support arbitrary string descriptors")
Signed-off-by: Bagas Sanjaya <bagasdotme@gmail.com>
Acked-by: Uwe Kleine-König <u.kleine-koenig@baylibre.com>
Link: https://lore.kernel.org/r/20250610031705.32774-2-bagasdotme@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the function usb_endpoint_num() and usb_endpoint_type()
rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250618040204.363383-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the function usb_endpoint_num() and usb_endpoint_type()
rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250618041222.408372-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Use the function usb_endpoint_num() and usb_endpoint_type()
rather than constants.
The Coccinelle semantic patch is as follows:
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bEndpointAddress & \(USB_ENDPOINT_NUMBER_MASK\|0x0f\))
+ usb_endpoint_num(epd)
@@ struct usb_endpoint_descriptor *epd; @@
- (epd->bmAttributes & \(USB_ENDPOINT_XFERTYPE_MASK\|3\))
+ usb_endpoint_type(epd)
Signed-off-by: Chen Ni <nichen@iscas.ac.cn>
Link: https://lore.kernel.org/r/20250618070714.817146-1-nichen@iscas.ac.cn
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull Kbuild fixes from Masahiro Yamada:
- Move warnings about linux/export.h from W=1 to W=2
- Fix structure type overrides in gendwarfksyms
* tag 'kbuild-fixes-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
gendwarfksyms: Fix structure type overrides
kbuild: move warnings about linux/export.h from W=1 to W=2
As we always iterate through the entire die_map when expanding
type strings, recursively processing referenced types in
type_expand_child() is not actually necessary. Furthermore,
the type_string kABI rule added in commit c9083467f7
("gendwarfksyms: Add a kABI rule to override type strings") can
fail to override type strings for structures due to a missing
kabi_get_type_string() check in this function.
Fix the issue by dropping the unnecessary recursion and moving
the override check to type_expand(). Note that symbol versions
are otherwise unchanged with this patch.
Fixes: c9083467f7 ("gendwarfksyms: Add a kABI rule to override type strings")
Reported-by: Giuliano Procida <gprocida@google.com>
Signed-off-by: Sami Tolvanen <samitolvanen@google.com>
Reviewed-by: Petr Pavlu <petr.pavlu@suse.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
Pull block fixes from Jens Axboe:
- Fix for a deadlock on queue freeze with zoned writes
- Fix for zoned append emulation
- Two bio folio fixes, for sparsemem and for very large folios
- Fix for a performance regression introduced in 6.13 when plug
insertion was changed
- Fix for NVMe passthrough handling for polled IO
- Document the ublk auto registration feature
- loop lockdep warning fix
* tag 'block-6.16-20250614' of git://git.kernel.dk/linux:
nvme: always punt polled uring_cmd end_io work to task_work
Documentation: ublk: Separate UBLK_F_AUTO_BUF_REG fallback behavior sublists
block: Fix bvec_set_folio() for very large folios
bio: Fix bio_first_folio() for SPARSEMEM without VMEMMAP
block: use plug request list tail for one-shot backmerge attempt
block: don't use submit_bio_noacct_nocheck in blk_zone_wplug_bio_work
block: Clear BIO_EMULATES_ZONE_APPEND flag on BIO completion
ublk: document auto buffer registration(UBLK_F_AUTO_BUF_REG)
loop: move lo_set_size() out of queue freeze
