The mpll_cfg, cur_ctr and phy_config members in struct dw_hdmi_plat_data
are only used to configure the Synopsys PHYs supported internally by DW
HDMI transmitter driver (gpu/drm/bridge/synopsys/dw-hdmi.c), via
hdmi_phy_configure_dwc_hdmi_3d_tx(), which is further invoked from
dw_hdmi_phy_init(). This is part of the internal
dw_hdmi_synopsys_phy_ops struct, managed within dw_hdmi_detect_phy().
To handle vendor PHYs, DW HDMI driver doesn't make use of the internal
PHY ops and, instead, relies on the glue layer to provide the phy_ops
and phy_name members of struct dw_hdmi_plat_data.
Drop the unnecessary assignments of DW internal PHY related members from
structs rk3228_hdmi_drv_data and rk3328_hdmi_drv_data, since both set
the phy_force_vendor flag and correctly provide the expected vendor PHY
data.
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240813-dw-hdmi-rockchip-cleanup-v1-4-b3e73b5f4fd6@collabora.com
The RK3066 VOP sets a dma_stop bit when it's done scanning out a frame
and needs the driver to acknowledge that by clearing the bit.
Unless we clear it "between" frames, the RGB output only shows noise
instead of the picture. atomic_flush is the place for it that least
affects other code (doing it on vblank would require converting all
other usages of the reg_lock to spin_(un)lock_irq, which would affect
performance for everyone).
This seems to be a redundant synchronization mechanism that was removed
in later iterations of the VOP hardware block.
Fixes: f4a6de855e ("drm: rockchip: vop: add rk3066 vop definitions")
Cc: stable@vger.kernel.org
Signed-off-by: Val Packett <val@packett.cool>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20240624204054.5524-2-val@packett.cool
GitHub Dependabot has issued the following alert:
"Upgrade setuptools to version 70.0.0 or later.
A vulnerability in the package_index module of pypa/setuptools
versions up to 69.1.1 allows for remote code execution via its
download functions. These functions, which are used to download
packages from URLs provided by users or retrieved from package
index servers, are susceptible to code injection. If these
functions are exposed to user-controlled inputs, such as package
URLs, they can execute arbitrary commands on the system. The
issue is fixed in version 70.0.
Severity: 8.8 / 10 (High)
Attack vector: Network
Attack complexity: Low
Privileges required: None
User interaction: Required
Scope: Unchanged
Confidentiality: High
Integrity: High
Availability: High
CVE ID: CVE-2024-6345"
To avoid disturbing everyone with the kernel repo hosted on GitHub,
I suggest we upgrade our python dependencies once again to appease
GitHub Dependabot.
Link: https://github.com/dependabot
Signed-off-by: WangYuli <wangyuli@uniontech.com>
Acked-by: Helen Koike <helen.koike@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0237854884D6DB3C+20240716083743.33415-1-wangyuli@uniontech.com
Amdgpu and nouveau call vga_switcheroo_process_delayed_switch() from
their lastclose callbacks. Call it from drm_lastclose(), so that the
driver functions can finally be removed. Only PCI devices with enabled
switcheroo do the delayed switching. The call has no effect on other
hardware.
v2:
- move change to drm_lastclose() (Sima)
- update docs for vga_switcheroo_process_delayed_switch()
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240812083000.337744-2-tzimmermann@suse.de
Fix the unexpected indentation errors.
drm_connector.c has some kerneldoc comments that were missing newlines.
This results in the following warnings when running make htmldocs:
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2344: WARNING: Definition list ends without a blank line; unexpected unindent. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2346: ERROR: Unexpected indentation. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2368: WARNING: Block quote ends without a blank line; unexpected unindent. [docutils]
./Documentation/gpu/drm-kms:538: ./drivers/gpu/drm/drm_connector.c:2381: ERROR: Unexpected indentation. [docutils]
Signed-off-by: Daniel Yang <danielyangkang@gmail.com>
Reviewed-by: Shuah Khan <skhan@linuxfoundation.org>
[hmahfooz: append drm/connector prefix]
Signed-off-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240809032350.226382-1-danielyangkang@gmail.com
Mgag200's BMC connector tracks the status of an underlying physical
connector and updates the BMC status accordingly. This functionality
works around GNOME's settings app, which cannot handle multiple
outputs on the same CRTC.
The workaround is now obsolete as the VGA-BMC connector handles BMC
support internally. Hence, remove the driver's code and the BMC output
entirely.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-6-tzimmermann@suse.de
Move calls to stop and start BMC scanout from CRTC helpers to the
VGA-BMC encoder's atomic_disable and atomic_enable. Makes the BMC
scanout transparent to the CRTC.
DRM's atomic helpers call an encoder's atomic_disable and atomic_enable
helpers for all enabled encoders. The BMC stops scanning out the VGA
signal if modeset disables the VGA encoder, and starts scanning out
if the modeset enables the VGA encoder.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-5-tzimmermann@suse.de
Control the VIDRST pin from the VGA-BMC encoder's atomic_check and
remove the respective code from CRTC. Makes the VIDRST functionality
fully composable.
The VIDRST pin allows an external clock source to control the SYNC
signals of the Matrox chip. The functionality is part of the CRTC,
but depends on the presence of the clock source. This is the case for
some BMCs, so control the pin from the VGA-BMC output.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-4-tzimmermann@suse.de
The VGA-BMC connector selects the VGA output if a display has been
attached to the physical connector. Otherwise it selects the BMC
output. In any case, the connector status is set to 'detected', so
that the userspace compositor displays to it.
Depending on the setting, the connector's display modes either come
from the VGA monitor's EDID or from an internal list of BMC-compatible
modes.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Jocelyn Falempe <jfalempe@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240805130622.63458-3-tzimmermann@suse.de
For Amlogic Meson G12B (A311D) SOC the display driver is meson and
gpu driver is panfrost. Currently, in drm-ci for Meson G12B (A311D),
only the gpu driver is tested. Refactor the existing meson jobs
and add support in drm-ci to test both display and gpu driver for
Amlogic Meson G12B (A311D) and update xfails.
Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for meson jobs.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-6-vignesh.raman@collabora.com
For mediatek mt8183, the display driver is mediatek, while the
gpu driver is panfrost. Currently, in drm-ci for mt8183, only
the gpu driver is tested. Refactor the existing mediatek jobs
and add support in drm-ci to test both display and gpu driver
for mt8183 and update xfails.
Since the correct driver name is passed from the job to test gpu
and display driver, remove the check to set IGT_FORCE_DRIVER
based on driver name for mediatek jobs.
Update the MAINTAINERS file to include xfails for panfrost driver.
Acked-by: Helen Koike <helen.koike@collabora.com>
Reviewed-by: Daniel Stone <daniels@collabora.com>
Signed-off-by: Vignesh Raman <vignesh.raman@collabora.com>
Signed-off-by: Helen Koike <helen.koike@collabora.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20240730021545.912271-4-vignesh.raman@collabora.com
