[WHAT]
Add KUnit coverage for the backlight level write path in
amdgpu_dm_backlight.c.
Tests cover stream lookup hit/miss, the connector-off and no-stream early
returns, and the AUX/PWM/idle-reallow programming branches. The DC
programming calls stay safe by injecting a NULL power module and keeping
idle optimizations a no-op via disable_idle_power_optimizations.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for uncovered MST paths:
- dm_mst_get_pbn_divider with non-null link
- retrieve_downstream_port_device AUX read failure
- dm_dp_aux_transfer non-ACK reply handling
- dm_handle_mst_sideband_msg_ready_event ESI read
failure and ready-bit without MST state
- dm_handle_mst_down_rep_msg_ready wrapper
- amdgpu_dm_initialize_dp_connector eDP early return
- amdgpu_dm_initialize_dp_connector non-eDP MST init
path (dc_link_dp_get_max_link_enc_cap,
drm_dp_mst_topology_mgr_init and subconnector
property attach)
The non-eDP MST test uses standard DRM KUnit helpers to
build a full fixture (drmm_mode_config_init plus
drm_connector_init), which the topology manager and
subconnector property require, and stubs the DC link
service get_max_link_enc_cap callback.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests to verify both functions return early when
job->fb is NULL without touching any buffer object.
Assisted-by: Copilot:Claude-Opus-4.6
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
FWTS autobrightness fails on eDP panels because actual_brightness can
read higher than the advertised max_brightness (e.g. 63576 vs 62451).
The conversion helpers expose the firmware PWM range to userspace as
[0..max]. But max_brightness is advertised as (max - min), which is
smaller. So reading the level can return a value above max_brightness.
This regressed in commit 4b61b8a390 ("drm/amd/display: Add debugging
message for brightness caps"), which changed max_brightness to
(max - min) and undid commit 8dbd72cb79 ("drm/amd/display: Export full
brightness range to userspace").
[How]
Advertise max_brightness as max, and scale the initial AC/DC brightness
against max too. Update the KUnit expectations to match.
Fixes: 4b61b8a390 ("drm/amd/display: Add debugging message for brightness caps")
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
Previous dcn315 BIOS has known dsc issue, not good for reuse their dsc settings.
this pre-OS dsc issue is fixed in dcn42 bios.
since there is no production bios update for older asic, limit our new code instead.
Reviewed-by: Mohit Bawa <mohit.bawa@amd.com>
Signed-off-by: Charlene Liu <Charlene.Liu@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Transition state does not have a valid dm_stream_ctx that should skip
configuring HDCP routine. The routine is valid to go through only when
a valid stream is created.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
On DCN32/321 sometimes DMCUB takes a long time to flush.
This adds a delay before the data is available on the driver side even
after driver receives notification from DMCUB via inbox
[How]
Allocating DMUB memory to GTT gives much better latency. Limit this to
DCN32/1 for now; it will be made general to all other dGPUs later.
Reviewed-by: Aurabindo Pillai <aurabindo.pillai@amd.com>
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
TCONs supporting VESA AUX Backlight does not always
support VESA Smooth Brightness. Driver software
needs to implement smooth brightness by periodically
updating the brightness by small steps. Driver
implementation is completed and verified on LCD
panels but solution is missing for OLED panels.
[How]
Updated driver to include smooth brightness for
OLED panels using VESA Aux Backlight.
Revert original workaround for VABC on oled issue,
as it is no longer needed.
Add VABC backlight Initialization sequence from
driver side.
Add fix to remove conflict between FW and driver
backlight programming for future ASIC.
Enable VABC for all future asic revisions.
Reviewed-by: Anthony Koo <anthony.koo@amd.com>
Reviewed-by: Dillon Varone <dillon.varone@amd.com>
Signed-off-by: Iswara Nagulendran <Iswara.Nagulendran@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_atomic_async_check(),
amdgpu_dm_plane_atomic_check(), amdgpu_dm_plane_panic_flush() and the
DRM plane reset, duplicate-state and destroy-state hooks.
Add the dm_test_init_atomic_check_state() helper and plane reset vtable
used by the new tests.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_helper_check_state() covering the
small viewport width, small viewport height, bottom-edge clipping and
scaling-caps rejection paths.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for the capability-callback-failure and not-capable
paths of amdgpu_dm_plane_validate_dcc(), and for the bad-size path of
amdgpu_dm_plane_get_cursor_position().
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for
amdgpu_dm_plane_fill_gfx12_plane_attributes_from_modifiers() covering
the block0, unconstrained-block and validation-failure cases.
Add the dm_test_gfx12_attrs() helper used to build the GFX12 inputs.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for
amdgpu_dm_plane_fill_gfx9_plane_attributes_from_modifiers() covering
DCC enablement, validation failure, and the RB+ 64B/128B and GFX9
64B/unconstrained block modes.
Add the dm_test_gfx9_attrs(), dm_test_setup_gfx9_dcc_device() and
dm_test_gfx9_dcc_modifier() helpers used to build the GFX9 DCC inputs.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for the video and GFX12 paths of
amdgpu_dm_plane_fill_plane_buffer_attributes().
Introduce the dm_test_plane_attrs(), dm_test_video_attrs() and
dm_test_graphics_attrs() helpers that drive the buffer-attribute fill
with representative plane states.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests covering the NV12 DCN1.x and plane-caps paths of
amdgpu_dm_plane_fill_dc_scaling_info() and the FP16 path of
amdgpu_dm_plane_get_min_max_dc_plane_scaling().
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_get_plane_modifiers() on GFX11
(64K-first and 256K-first) and GFX12 devices.
Add a register-read mock (dm_test_gfx11_reg_ctx and friends) and
device-setup helpers so the GFX11 DCC modifier ordering can be checked
without real hardware.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for amdgpu_dm_plane_get_plane_modifiers() on GFX9,
Raven, Raven constant-encode, GFX10.1 and GFX10.3 devices.
Introduce the dm_test_expect_mods_terminated(), dm_test_mods_contain()
and dm_test_get_primary_mods() helpers used to validate the generated
modifier lists.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for amdgpu_dm_plane_get_format_info(), the overlay
universal-plane path of get_plane_formats(), the D-swizzle rejection
path of format_mod_supported(), and the DCN4.2 variant of
fill_blending_from_plane_state().
These exercise format-query and blending code paths that the existing
suite did not cover.
Assisted-by: Copilot:Claude-Opus-4.8 GPT-5.5
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit coverage for amdgpu_dm_fbc_init() on the
amdgpu_dm_connector tests:
- No FBC present
- Non-eDP link
- Buffer already allocated
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit coverage for update_subconnector_property() on the
amdgpu_dm_connector suite:
- DP connector with a sink: subconnector property is resolved from
the dongle type (VGA converter -> VGA).
- DP connector without a sink: dongle type is ignored and the
property stays Unknown.
- Non-DP connector: function early-returns and leaves a pre-seeded
property value untouched.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit coverage for adjust_colour_depth_from_display_info() 420
reduction, amdgpu_dm_get_output_color_space() Y_ONLY/YCbCr601/BT2020
fallbacks, to_drm_connector_type() dual-link DVI-D, and
copy_crtc_timing_for_drm_display_mode().
Export copy_crtc_timing_for_drm_display_mode via EXPORT_IF_KUNIT so
the tests can reach it.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Adds a few more test cases to the hdcp code
- process_output(): make sure work gets requeued when callback and
watchdog are stopped but also asked to run again
- event_property_update(): bail out when the connector is NULL
- hdcp_handle_cpirq(): schedules the work and picks the right link
- hdcp_update_display(): schedules property validation on enable,
resets status and cancels validation on disable
- hdcp_create_workqueue(): returns NULL when max links is zero
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[Why]
If an external monitor is connected at power-on and then unplugged
before the driver loads (e.g. at the GRUB menu), the system can no
longer enter the s0i3 deepest suspend state, even though all connectors
report disconnected.
The pre-OS firmware (GOP/vBIOS) lights up a front-end for the display
that is present at power-on. The driver never fully tears this inherited
pipe down, and the leftover pipe keeps the DCN block from reaching idle,
which blocks s0i3.
[How]
Add dc_disable_dangling_timing_generators() to DC core and call it from
amdgpu_dm right after dc_hardware_init(). It scans every enabled timing
generator and classifies it as in-use or dangling. If a dangling pipe
exists and nothing needs to be preserved, power down the hw blocks so
DCN can reach idle.
Assisted-by: Cursor:claude-opus-4.8
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Tom Chung <chiahsuan.chung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[why]
The 8K120/8K240 timings live in DisplayID extension blocks 2 and 3
of this EDID. The EDID is a 4-block (512-byte) HDMI 2.1 EDID
that uses HF-EEODB.
drm core reads and parses this correctly, but amdgpu rebuilds its own copy.
Only 2 of 4 blocks were copied into sink->dc_edid, that leads to
drm_edid_connector_add_modes() never sees blocks 2 and 3.
[how]
Directly populate edid_blob_ptr with a blob whose length is the full,
and HF-EEODB-aware size.
Reviewed-by: Sun peng (Leo) Li <sunpeng.li@amd.com>
Signed-off-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for the two remaining uncovered functions in
amdgpu_dm_irq.c: amdgpu_dm_irq_handler() and dm_handle_vmin_vmax_update().
amdgpu_dm_irq_handler() is driven with a fake dc whose irq_service maps
the hardware IRQ entry to a DC source and whose per-source info table
lets dc_interrupt_ack() succeed; high- and low-context counting handlers
verify the immediate and scheduled dispatch paths.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add the final batch of amdgpu_dm_irq KUnit tests covering the high-IRQ
callbacks (dm_pflip_high_irq, dm_vupdate_high_irq, dm_crtc_high_irq),
dm_handle_hpd_work, the DMUB outbox1 low IRQ, and the per-ASIC IRQ
handler registration helpers (DCE110, DCN10 and outbox).
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for the DMUB HPD notification callbacks
(dmub_hpd_callback, dmub_hpd_sense_callback) and for
amdgpu_dm_register_hpd_handlers().
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit coverage for the HPD interrupt-handling helpers: the HPD-RX
offload worker, the HDMI HPD debounce worker, handle_hpd_irq_helper(),
handle_hpd_irq(), schedule_hpd_rx_offload_work() and handle_hpd_rx_irq().
Expose these statics for KUnit and add the stub link-service callbacks,
sink helpers and fixtures the tests rely on.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Add KUnit coverage for amdgpu_dm_hpd_init() and amdgpu_dm_hpd_fini():
empty connector list, the per-connector HW fallback path, the analog
polling enable/disable path, and the base-driver irq-ref path. Export
both functions for KUnit and add shared drm_connector test helpers.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit tests for the per-source IRQ state callbacks (HPD, pflip,
CRTC, vline0, vupdate, dmub outbox/trace), the immediate and scheduled
IRQ work paths, and amdgpu_dm_outbox_init.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Expand the amdgpu_dm_irq KUnit suite with the first batch of tests
covering IRQ source-function setup, suspend/resume of the IRQ
clients, and the HPD RX offload workqueue lifecycle.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for dm_helpers_construct_old_payload, the DP MST
payload allocation, poll-for-ACT and deallocation success paths, the
full dm_helpers_dp_write_dsc_enable matrix and
dm_helpers_dp_handle_test_pattern_request.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
dm_mst_test_fp_guarded_public_stubs() passes NULL arguments to
dm_dp_mst_is_port_support_mode() to test the stub implementation when
CONFIG_DRM_AMD_DC_FP is disabled.
However, this test is always registered. When CONFIG_DRM_AMD_DC_FP is
enabled, the real implementation is used instead of the stub. The real
implementation expects valid pointers, so passing NULL can lead to a
NULL pointer dereference.
Register this test only when CONFIG_DRM_AMD_DC_FP is disabled.
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Cc: Alex Hung <alex.hung@amd.com>
Cc: George Zhang <george.zhang@amd.com>
Cc: Roman Li <roman.li@amd.com>
Cc: Tom Chung <chiahsuan.chung@amd.com>
Cc: Aurabindo Pillai <aurabindo.pillai@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
No functional changes. Just clean up a conceptual mismatch.
Based on feedback on the NUTMEG code in DC, the
preferred_link_setting is meant to force the DP link to a
specific setting, meaning both the link rate and lane count
should be locked to an exact value. What NUTMEG needs is
a lower bound on the link rate, which is not the same concept.
Implement this as a HW workaround flag instead.
Suggested-by: Wenjing Liu <wenjing.liu@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
When there is a preferred link rate setting, it needs to be
applied to both the current and initial link rate.
This was regressed by a "coding style" fix, which caused
the current link rate to not respect the preferred value.
This commit restores the functionality of NUTMEG,
the DP bridge encoder found on old APUs such as Kaveri.
Fixes: a62346043a ("drm/amd/display: Fix coding style issue")
Closes: https://gitlab.freedesktop.org/drm/amd/-/work_items/5465
Cc: Chuanyu Tseng <Chuanyu.Tseng@amd.com>
Reviewed-by: Fangzhi Zuo <Jerry.Zuo@amd.com>
Signed-off-by: Timur Kristóf <timur.kristof@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
DM I2C adapters can remain visible to userspace while DM teardown is
already in progress. A concurrent i2c-dev transfer may then enter
amdgpu_dm_i2c_xfer() after the backing DM state has been torn down,
leading to a NULL pointer dereference.
Create a devres group around the DM I2C adapter lifetime and release it
at the start of dm_hw_fini(), before HPD, IRQ, and DM state are torn
down. This removes the I2C adapters first and waits for in-flight users
to drain before the structures used by amdgpu_dm_i2c_xfer() disappear.
This fixes a teardown ordering race seen during device removal:
BUG: kernel NULL pointer dereference
RIP: amdgpu_dm_i2c_xfer+0x122/0x1c0 [amdgpu]
Call Trace:
__i2c_transfer
i2c_transfer
i2cdev_ioctl_rdwr
Fixes: 5b3eca05cf ("drm/amd/display: Use devm_i2c_add_adapter to simplify i2c cleanup logic")
Signed-off-by: Geoffrey McRae <geoffrey.mcrae@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Leo Li <sunpeng.li@amd.com>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Both jpeg_v5_0_1.c and jpeg_v5_0_2.c implement identical
interrupt processing routines. To avoid code duplication,
make the implementation in jpeg_v5_0_1.c non-static and
call it directly from jpeg_v5_0_2.c.
Signed-off-by: Andre Luiz Batista Bueno <andrebueno.mac@gmail.com>
Co-developed-by: Enzo Furegatti Spinella <enzo.spinella@usp.br>
Signed-off-by: Enzo Furegatti Spinella <enzo.spinella@usp.br>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
debugfs is intended for debugging only, and failures to create debugfs
entries should not affect normal operation.
Remove the check for debugfs_create_dir() in kfd_debugfs_add_process().
If debugfs entries cannot be created, continue without them instead of
reporting an unnecessary error.
Fixes: 325de6bf33 ("drm/amdkfd: expose pasid of secondary contexts by debugfs")
Reported-by: Dan Carpenter <error27@gmail.com>
Cc: Zhu Lingshan <lingshan.zhu@amd.com>
Cc: Felix Kuehling <felix.kuehling@amd.com>
Signed-off-by: Srinivasan Shanmugam <srinivasan.shanmugam@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
UMC error injection on MI300 series is dispatched by the RAS TA using
the injection method; only the "coherent" methods are address based,
the single-shot/persistent/ac-parity ones ignore the address.
The debugfs control path validated the injection address against the
bad page list for every UMC injection. On uniras (SMU v13+) devices the
address is now validated by the ras_mgr inject handler, so the legacy
debugfs bad page check only runs on the legacy RAS path; other ASICs
keep injecting by address.
In the ras_mgr handler an injection is treated as non address-based only
when userspace passes the U64_MAX sentinel address and the method is a
non-address method. In that case the address is cleared to 0 and the bad
page / range validation is skipped; otherwise the injection address is
validated as before.
Signed-off-by: Stanley.Yang <Stanley.Yang@amd.com>
Reviewed-by: Hawking Zhang <Hawking.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
amdgpu_dm_connector_atomic_check() checks whether the old or new
connector state returned by the atomic helpers is NULL before using
those pointers.
However, new_con_state is already dereferenced while initializing crtc,
before the NULL check is reached. If
drm_atomic_get_new_connector_state() returns NULL, the function can
dereference the NULL pointer before the WARN_ON() check can handle it.
Declare crtc first and initialize it only after the NULL check has
succeeded.
Fixes: 1e5e8d672f ("drm/amd/display: Avoid a NULL pointer dereference")
Signed-off-by: Guangshuo Li <lgs201920130244@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@amd.com>
Link: https://patch.msgid.link/20260708072751.724400-1-lgs201920130244@gmail.com
(ML: adjust for movement to amdgpu_dm_connector.c)
Signed-off-by: Mario Limonciello <mario.limonciello@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
total_cwsr_size was computed in 32-bit before being used as a BO/SVM
allocation size.
With large ctx_save_restore_area_size and debug_memory_size
multiplied by the XCC count, the product can wrap,
yielding an undersized CWSR save area that firmware later overruns.
Promote total_cwsr_size to u64 and use check_add_overflow()/
check_mul_overflow() in both kfd_queue_acquire_buffers() and
kfd_queue_release_buffers().
Signed-off-by: Yongqiang Sun <Yongqiang.Sun@amd.com>
Reviewed-by: Philip Yang <philip.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for dm_helpers_read_mccs_caps and
dm_helpers_mccs_vcp_set, including the DP/HDMI/legacy-PCON selection,
the i2c VCP request and set packets and the retry-failure paths.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for dm_helpers_submit_i2c,
dm_helper_dmub_aux_transfer_sync, the empty stub helpers, the MST
null-connector early returns, dm_helpers_dmub_outbox_interrupt_control,
dm_helpers_mst_enable_stream_features and
dm_helpers_enable_periodic_detection.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
[WHAT]
Add KUnit coverage for the EDID parsing helpers edid_extract_panel_id,
apply_edid_quirks and dm_helpers_parse_edid_caps, together with the
ACPI/VBIOS EDID readers dm_helpers_probe_acpi_edid,
dm_helpers_read_acpi_edid and dm_helpers_read_vbios_hardcoded_edid.
Assisted-by: Copilot:Claude-Opus-4.8
Reviewed-by: Bhawanpreet Lakha <bhawanpreet.lakha@amd.com>
Signed-off-by: Alex Hung <alex.hung@amd.com>
Signed-off-by: George Zhang <george.zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
