Merge series from Peter Ujfalusi <peter.ujfalusi@linux.intel.com>:
The PROBE_INFO (ext_manifest type 3) is not used by the kernel, but
at every tiem the firmware is loaded the following is printed in
info level (user visible):
unknown sof_ext_man header type 3 size 0x30
The type is known, but it is not handled, the print is misleading.
It has been reported that the DMA memory allocation for firmware download
can fail after extended period of uptime on systems with relatively small
amount of RAM when the system memory becomes fragmented.
The issue primarily happens when the system is waking up from system
suspend, swap might not be available and the MM system cannot move things
around to allow for successful allocation.
If the IMR boot is not supported then for each DSP boot we would need to
allocate the DMA buffer for firmware transfer, which can increase the
chances of the issue to be hit.
This patch adds support for allocating the DMA buffers once at first boot
time and keep it until the system is shut down, rebooted or the drivers
re-loaded and makes this as the default operation.
With persistent_cl_buffer module parameter the persistent Code Loader
DMA buffer can be disabled to fall back to on demand allocation.
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Link: https://patch.msgid.link/20241107121440.1472-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The HDA specification states that the SDnLVI (Last Valid Index) must be at
least 1 (two BDLE entry).
Update the debug prints as well to provide better information.
While the LVI=0 worked so far without issues, it is better to align with
the specification to avoid unforeseen issues with FW loading.
Notes:
- The LVI > 0 rules is valid and honored for audio use cases
- LVI == 0 is used with software controlled (SPIB) transfers only for
firmware and library loading, which is permitted by the hardware
- This is not spelled out in the specification and it is better to avoid
cases
Signed-off-by: Peter Ujfalusi <peter.ujfalusi@linux.intel.com>
Reviewed-by: Liam Girdwood <liam.r.girdwood@intel.com>
Reviewed-by: Kai Vehmanen <kai.vehmanen@linux.intel.com>
Reviewed-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://patch.msgid.link/20241107121532.3241-1-peter.ujfalusi@linux.intel.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from Bard Liao <yung-chuan.liao@linux.intel.com>:
Fix the ld.lld: error: undefined symbol: sdca_device_quirk_match issue
when CONFIG_SND_SOC_SDCA=m and CONFIG_SND_SOC_ACPI_INTEL_SDCA_QUIRKS=y.
On the Renesas RZ/G3S SMARC Carrier II board having a DA7212 codec (using
da7213 driver) connected to one SSIF-2 available on the Renesas RZ/G3S SoC
it has been discovered that using the runtime PM API for suspend/resume
(as will be proposed in the following commits) leads to the codec not
being propertly initialized after resume. This is because w/o
max_register populated to regmap_config the regcache_rbtree_sync()
breaks on base_reg > max condition and the regcache_sync_block() call is
skipped.
Fixes: ef5c2eba24 ("ASoC: codecs: Add da7213 codec")
Cc: stable@vger.kernel.org
Signed-off-by: Claudiu Beznea <claudiu.beznea.uj@bp.renesas.com>
Link: https://patch.msgid.link/20241106081826.1211088-23-claudiu.beznea.uj@bp.renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Merge series from wangweidong.a@awinic.com:
Add the awinic,aw88081 property to support the aw88081 chip.
The driver is for amplifiers aw88081 of Awinic Technology
Corporation. The awinic AW88081 is an I2S/TDM input,
high efficiency digital Smart K audio amplifier
Merge series from Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>:
rtd has own ID, but it is naming "num" for it. The naming is confusable.
This patch rename it to "id".
And many functions request both "rtd" and its "id" as function parameter,
but rtd itself has rtd->id. This patch cleanup it.
And, Qcom driver want to use irregular rtd ID because of its topology,
and thus, soc-core need irregular calculation. I'm not sure why only Qcom
needs such calculation, but this patch also cleanup it.
But I guess we want to cleanup is not soc-core but Qcom side (?)
On some MediaTek SoCs, an Audio DSP (ADSP) is integrated as a separate
hardware block that leverages Sound Open Firmware (SOF) and provides
additional audio functionalities. This hardware is optional, and the
audio subsystem will still function normally when it's not present.
To enable ADSP support, a 'mediatek,adsp' property is required in the
sound card node to pass the ADSP phandle. This allows AFE to link to
ADSP when the sound card is probed.
MT8188 has ADSP integrated, so add the 'mediatek,adsp' property to
allow using it in the audio subsystem.
This fixes dtbs_check error:
Unevaluated properties are not allowed ('mediatek,adsp' was
unexpected)
Signed-off-by: Fei Shao <fshao@chromium.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Link: https://patch.msgid.link/20241105091246.3944946-1-fshao@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix an issue detected by the Smatch tool:
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_1'.
sound/soc/bcm/bcm63xx-pcm-whistler.c:264 i2s_dma_isr()
error: uninitialized symbol 'val_2'.
These errors were triggered because the variables 'val_1' and 'val_2'
could remain uninitialized if 'offlevel' is zero, meaning the loop
that assigns values to them does not execute. In this case,
'dma_addr_next' would use uninitialized data, potentially leading
to undefined behavior.
To resolve this, a conditional update for 'dma_addr_next' is added,
ensuring it is assigned only when 'val_1' and 'val_2' are read.
A new boolean variable 'val_read' flags when the values have been
retrieved, setting 'dma_addr_next' only if valid data is available.
This solution prevents the use of uninitialized data, maintaining
defined behavior for 'dma_addr_next' in all cases, and aligns with
expected usage of I2S RX descriptor data.
Signed-off-by: Suraj Sonawane <surajsonawane0215@gmail.com>
Link: https://patch.msgid.link/20241102123630.25446-1-surajsonawane0215@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
An atomicity violation occurs when the validity of the variables
da7219->clk_src and da7219->mclk_rate is being assessed. Since the entire
assessment is not protected by a lock, the da7219 variable might still be
in flux during the assessment, rendering this check invalid.
To fix this issue, we recommend adding a lock before the block
if ((da7219->clk_src == clk_id) && (da7219->mclk_rate == freq)) so that
the legitimacy check for da7219->clk_src and da7219->mclk_rate is
protected by the lock, ensuring the validity of the check.
This possible bug is found by an experimental static analysis tool
developed by our team. This tool analyzes the locking APIs
to extract function pairs that can be concurrently executed, and then
analyzes the instructions in the paired functions to identify possible
concurrency bugs including data races and atomicity violations.
Fixes: 6d817c0e9f ("ASoC: codecs: Add da7219 codec driver")
Cc: stable@vger.kernel.org
Signed-off-by: Qiu-ji Chen <chenqiuji666@gmail.com>
Link: https://patch.msgid.link/20240930101216.23723-1-chenqiuji666@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Some Qualcomm X1E laptops have only two speakers. Regardless whether
this sound card driver is suitable for them (we could re-use one for
some older SoC), we should set reasonable channel map depending on the
number of channels, not always 4-speaker setup.
This change is necessary for bringing audio support on Lenovo Thinkpad
T14s with Qualcomm X1E78100 and only two speakers.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20241023124152.130706-1-krzysztof.kozlowski@linaro.org
Signed-off-by: Mark Brown <broonie@kernel.org>
i.MX6SL and i.MX6SX SPDIF blocks are compatible with i.MX35.
Document 'fsl,imx35-spdif' as a fallback compatible for these two
chip variants.
This fixes the following dt-schema warnings:
compatible: ['fsl,imx6sl-spdif', 'fsl,imx35-spdif'] is too long
compatible: ['fsl,imx6sx-spdif', 'fsl,imx35-spdif'] is too long
Signed-off-by: Fabio Estevam <festevam@denx.de>
Link: https://patch.msgid.link/20241028020749.36972-1-festevam@gmail.com
Signed-off-by: Mark Brown <broonie@kernel.org>
qcom/qdsp6 want to use irregular rtd->id because of its topology.
Current code is calculating it at soc_init_pcm_runtime() which calls
soc_new_pcm(), and it doesn't save it to rtd->id.
Let's calculate and save it to rtd at snd_soc_add_pcm_runtime()
which create rtd and connect related components.
But, this feature should be implemented by using "dai_link" instead
of "component". Add FIXME as comment.
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Link: https://patch.msgid.link/87r086b84w.wl-kuninori.morimoto.gx@renesas.com
Signed-off-by: Mark Brown <broonie@kernel.org>
