Add the compatible string "qcom,sa8775p-camss" to support the
Camera Subsystem (CAMSS) on the Qualcomm lemans platform.
The Lemans(SA8775P) platform provides:
- 2 x VFE (version 690), each with 3 RDI
- 5 x VFE Lite (version 690), each with 6 RDI
- 2 x CSID (version 690)
- 5 x CSID Lite (version 690)
- 4 x CSIPHY (version 690)
- 3 x TPG
Lemans is the first Qualcomm SoC to introduce a CSIPHY-based
Test Pattern Generator (TPG).
Co-developed-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Wenmeng Liu <quic_wenmliu@quicinc.com>
Signed-off-by: Vikram Sharma <quic_vikramsa@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The Qualcomm SoC Iris video codec is an evolution of previous Venus and
it comes with its own Iris Linux drivers. These new drivers were
accepted under condition they actually improve state of afairs, instead
of duplicating old, legacy solutions.
Unfortunately binding still references common parts of Venus without
actual need and benefit. For example Iris does not use fake
"video-firmware" device node (fake because there is no actual device
underlying it and it was added only to work around some Linux issues
with IOMMU mappings).
Stop referencing venus-common schema in the new Qualcomm Iris bindings
and move all necessary properties, except unused "video-firmware" (no
driver usage, no DTS).
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Reviewed-by: Bryan O'Donoghue <bod@kernel.org>
[bod: Changed title order to dt-bindings: media]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Add binding for Qualcom SM8750 Iris video codec, which comes with
significantly different powering up sequence than previous SM8650, thus
different clocks and resets. For consistency keep existing clock and
clock-names naming, so the list shares common part.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
[bod: re-ordered patch title to dt-bindings: media]
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Iris in X1E80100 is pretty much identical to SM8550. We can use the same
firmware image and the same definitions in the driver, so just add
qcom,x1e80100-iris to the existing list with qcom,sm8550-iris as fallback
compatible.
Signed-off-by: Stephan Gerhold <stephan.gerhold@linaro.org>
Reviewed-by: Vikash Garodia <quic_vgarodia@quicinc.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Reviewed-by: Bryan O'Donoghue <bryan.odonoghue@linaro.org>
Signed-off-by: Bryan O'Donoghue <bod@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The sensor requires an external clock, and drivers need to access the
clock to retrieve its frequency in order to configure the sensor. This
makes usage of the clocks property mandatory for a system to work
properly. Mark the clocks and clock-names properties as required, and
update the example accordingly.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The sensor requires an external clock, and drivers need to access the
clock to retrieve its frequency in order to configure the sensor. This
makes usage of the clocks property mandatory for a system to work
properly. Mark the property as required.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Usage of the clock-frequency property for camera sensors is discouraged
in favour of using assigned-clock-rates (and assigned-clock-parents
where needed). Mark the property as deprecated.
Update the examples accordingly. In DT examples where the sensor input
clock appears to come from a programmable clock generator, replace
clock-frequency by the assigned-clocks and assigned-clock-rates
properties. Otherwise, just drop clock-frequency.
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Sakari Ailus <sakari.ailus@linux.intel.com>
Reviewed-by: Mehdi Djait <mehdi.djait@linux.intel.com>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
The CSI-2 receiver can be instantiated with up to four output channels.
This is an integration-specific property, specify the number of
instantiated channels through a new fsl,num-channels property. The
property is optional, and defaults to 1 as only one channel is currently
supported by drivers.
Using the compatible string to infer the number of channels has been
considered, but multiple instances of the same CSIS in the same SoC
could conceptually be synthesized with a different number of channels.
An explicit property is therefore more appropriate.
The only known SoC to have more than one channel is the i.MX8MP. As the
binding examples do not cover that SoC, don't update them.
Link: https://lore.kernel.org/r/20250822002734.23516-12-laurent.pinchart@ideasonboard.com
Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Hans Verkuil <hverkuil+cisco@kernel.org>
Pull mailbox updates from Jassi Brar:
- aspeed: add driver and bindings for ast2700
- broadcom: add driver and bindings for bcm74110
- mediatek: fix RPM api usage
- qcom: use dev_fwnode
- pcc: support shared buffer
- misc dt-bindings cleanup
* tag 'mailbox-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/jassibrar/mailbox:
mailbox/pcc: support mailbox management of the shared buffer
mailbox: bcm74110: Fix spelling mistake
mailbox: bcm74110: remove unneeded semicolon
mailbox: aspeed: add mailbox driver for AST27XX series SoC
dt-bindings: mailbox: Add ASPEED AST2700 series SoC
dt-bindings: mailbox: Drop consumers example DTS
dt-bindings: mailbox: nvidia,tegra186-hsp: Use generic node name
dt-bindings: mailbox: Correct example indentation
dt-bindings: mailbox: ti,secure-proxy: Add missing reg maxItems
dt-bindings: mailbox: amlogic,meson-gxbb-mhu: Add missing interrupts maxItems
dt-bindings: mailbox: qcom-ipcc: document the Milos Inter-Processor Communication Controller
mailbox: Add support for bcm74110
dt-bindings: mailbox: Add support for bcm74110
mailbox: Use dev_fwnode()
mailbox: mtk-cmdq: Switch to pm_runtime_put_autosuspend()
Pull networking fixes from Jakub Kicinski:
Previous releases - regressions:
- netlink: avoid infinite retry looping in netlink_unicast()
Previous releases - always broken:
- packet: fix a race in packet_set_ring() and packet_notifier()
- ipv6: reject malicious packets in ipv6_gso_segment()
- sched: mqprio: fix stack out-of-bounds write in tc entry parsing
- net: drop UFO packets (injected via virtio) in udp_rcv_segment()
- eth: mlx5: correctly set gso_segs when LRO is used, avoid false
positive checksum validation errors
- netpoll: prevent hanging NAPI when netcons gets enabled
- phy: mscc: fix parsing of unicast frames for PTP timestamping
- a number of device tree / OF reference leak fixes"
* tag 'net-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (44 commits)
pptp: fix pptp_xmit() error path
net: ti: icssg-prueth: Fix skb handling for XDP_PASS
net: Update threaded state in napi config in netif_set_threaded
selftests: netdevsim: Xfail nexthop test on slow machines
eth: fbnic: Lock the tx_dropped update
eth: fbnic: Fix tx_dropped reporting
eth: fbnic: remove the debugging trick of super high page bias
net: ftgmac100: fix potential NULL pointer access in ftgmac100_phy_disconnect
dt-bindings: net: Replace bouncing Alexandru Tachici emails
dpll: zl3073x: ZL3073X_I2C and ZL3073X_SPI should depend on NET
net/sched: mqprio: fix stack out-of-bounds write in tc entry parsing
Revert "net: mdio_bus: Use devm for getting reset GPIO"
selftests: net: packetdrill: xfail all problems on slow machines
net/packet: fix a race in packet_set_ring() and packet_notifier()
benet: fix BUG when creating VFs
net: airoha: npu: Add missing MODULE_FIRMWARE macros
net: devmem: fix DMA direction on unmapping
ipa: fix compile-testing with qcom-mdt=m
eth: fbnic: unlink NAPIs from queues on error to open
net: Add locking to protect skb->dev access in ip_output
...
Pull input updates from Dmitry Torokhov:
- updates to several drivers consuming GPIO APIs to use setters
returning error codes
- an infrastructure allowing to define "overlays" for touchscreens
carving out regions implementing buttons and other elements from a
bigger sensors and a corresponding update to st1232 driver
- an update to AT/PS2 keyboard driver to map F13-F24 by default
- Samsung keypad driver got a facelift
- evdev input handler will now bind to all devices using EV_SYN event
instead of abusing id->driver_info
- two new sub-drivers implementing 1A (capacitive buttons) and 21
(forcepad button) functions in Synaptics RMI driver
- support for polling mode in Goodix touchscreen driver
- support for support for FocalTech FT8716 in edt-ft5x06 driver
- support for MT6359 in mtk-pmic-keys driver
- removal of pcf50633-input driver since platform it was used on is
gone
- new definitions for game controller "grip" buttons (BTN_GRIP*) and
corresponding changes to xpad and hid-steam controller drivers
- a new definition for "performance" key
* tag 'input-for-v6.17-rc0' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: (38 commits)
HID: hid-steam: Use new BTN_GRIP* buttons
Input: add keycode for performance mode key
Input: max77693 - convert to atomic pwm operation
Input: st1232 - add touch-overlay handling
dt-bindings: input: touchscreen: st1232: add touch-overlay example
Input: touch-overlay - add touchscreen overlay handling
dt-bindings: touchscreen: add touch-overlay property
Input: atkbd - correctly map F13 - F24
Input: xpad - use new BTN_GRIP* buttons
Input: Add and document BTN_GRIP*
Input: xpad - change buttons the D-Pad gets mapped as to BTN_DPAD_*
Documentation: Fix capitalization of XBox -> Xbox
Input: synaptics-rmi4 - add support for F1A
dt-bindings: input: syna,rmi4: Document F1A function
Input: synaptics-rmi4 - add support for Forcepads (F21)
Input: mtk-pmic-keys - add support for MT6359 PMIC keys
Input: remove special handling of id->driver_info when matching
Input: evdev - switch matching to EV_SYN
Input: samsung-keypad - use BIT() and GENMASK() where appropriate
Input: samsung-keypad - use per-chip parameters
...
Providers DTS examples should not contain consumer nodes, because they
are completely redundant, obvious (defined in common schema) and add
unnecessary bloat. Drop consumer examples and unneeded node labels.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
According to Devicetree specifications, device node names should be
generic, thus Mailbox provider should be called "mailbox", not "hsp".
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
DTS example in the bindings should be indented with 2- or 4-spaces, so
correct a mixture of different styles to keep consistent 4-spaces.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Reviewed-by: Sven Peter <sven@kernel.org>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Lists should have fixed constraint, so add missing maxItems to the "reg"
property. Since minItems=maxItems, the minItems is implied by dtschema
so can be dropped.
Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Reviewed-by: Nishanth Menon <nm@ti.com>
Acked-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Jassi Brar <jassisinghbrar@gmail.com>
Pull more SCSI updates from James Bottomley:
"This is mostly fixes and cleanups and code reworks that trickled in
across the merge window and the weeks leading up. The only substantive
update is the Mediatek ufs driver which accounts for the bulk of the
additions"
* tag 'scsi-misc' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (37 commits)
scsi: libsas: Use a bool for sas_deform_port() second argument
scsi: libsas: Move declarations of internal functions to sas_internal.h
scsi: libsas: Make sas_get_ata_info() static
scsi: libsas: Simplify sas_ata_wait_eh()
scsi: libsas: Refactor dev_is_sata()
scsi: sd: Make sd shutdown issue START STOP UNIT appropriately
scsi: arm64: dts: mediatek: mt8195: Add UFSHCI node
scsi: dt-bindings: mediatek,ufs: add MT8195 compatible and update clock nodes
scsi: dt-bindings: mediatek,ufs: Add ufs-disable-mcq flag for UFS host
scsi: ufs: ufs-mediatek: Add UFS host support for MT8195 SoC
scsi: ufs: ufs-pci: Remove control of UIC Completion interrupt for Intel MTL
scsi: ufs: core: Do not write interrupt enable register unnecessarily
scsi: ufs: core: Set and clear UIC Completion interrupt as needed
scsi: ufs: core: Remove duplicated code in ufshcd_send_bsg_uic_cmd()
scsi: ufs: core: Move ufshcd_enable_intr() and ufshcd_disable_intr()
scsi: ufs: ufs-pci: Remove UFS PCI driver's ->late_init() call back
scsi: ufs: ufs-pci: Fix default runtime and system PM levels
scsi: ufs: ufs-pci: Fix hibernate state transition for Intel MTL-like host controllers
scsi: ufs: host: mediatek: Support FDE (AES) clock scaling
scsi: ufs: host: mediatek: Support clock scaling with Vcore binding
...
Pull more i2c updates from Wolfram Sang:
"A few more patches from I2C. Some are fixes which would be nice to
have in rc1 already, some patches have nearly been fallen through the
cracks, some just needed a bit more testing.
- acpi: enable 100kHz workaround for DLL0945
- apple: add support for Apple A7–A11, T2 chips; Kconfig update
- mux: mule: fix error handling path
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls"
* tag 'i2c-for-6.17-rc1-part2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: muxes: mule: Fix an error handling path in mule_i2c_mux_probe()
i2c: Force DLL0945 touchpad i2c freq to 100khz
i2c: apple: Drop default ARCH_APPLE in Kconfig
i2c: qcom-geni: fix I2C frequency table to achieve accurate bus rates
dt-bindings: i2c: apple,i2c: Document Apple A7-A11, T2 compatibles
i2c: tegra: Remove dma_sync_*() calls
i2c: tegra: Use internal reset when reset property is not available
i2c: stm32f7: support i2c_*_dma_safe_msg_buf APIs
Pull RTC updates from Alexandre Belloni:
"Support for a new RTC in an existing driver and all the drivers
exposing clocks using the common clock framework have been converted
to determine_rate(). Summary:
Subsystem:
- Convert drivers exposing a clock from round_rate() to determine_rate()
Drivers:
- ds1307: oscillator stop flag handling for ds1341
- pcf85063: add support for RV8063"
* tag 'rtc-6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (34 commits)
rtc: ds1685: Update Joshua Kinard's email address.
rtc: rv3032: convert from round_rate() to determine_rate()
rtc: rv3028: convert from round_rate() to determine_rate()
rtc: pcf8563: convert from round_rate() to determine_rate()
rtc: pcf85063: convert from round_rate() to determine_rate()
rtc: nct3018y: convert from round_rate() to determine_rate()
rtc: max31335: convert from round_rate() to determine_rate()
rtc: m41t80: convert from round_rate() to determine_rate()
rtc: hym8563: convert from round_rate() to determine_rate()
rtc: ds1307: convert from round_rate() to determine_rate()
rtc: rv3028: fix incorrect maximum clock rate handling
rtc: pcf8563: fix incorrect maximum clock rate handling
rtc: pcf85063: fix incorrect maximum clock rate handling
rtc: nct3018y: fix incorrect maximum clock rate handling
rtc: hym8563: fix incorrect maximum clock rate handling
rtc: ds1307: fix incorrect maximum clock rate handling
rtc: pcf85063: scope pcf85063_config structures
rtc: Optimize calculations in rtc_time64_to_tm()
dt-bindings: rtc: amlogic,a4-rtc: Add compatible string for C3
rtc: ds1307: handle oscillator stop flag (OSF) for ds1341
...
i2c-host for v6.17, part 2
- apple: add support for Apple A7–A11, T2 chips
- qcom-geni: fix controller frequency mapping
- stm32f7: add DMA-safe transfer support
- tegra: use controller reset if device reset is missing
- tegra: remove unnecessary dma_sync*() calls
Pull pin control updates from Linus Walleij:
"Nothing stands out, apart from maybe the interesting Eswin EIC7700, a
RISC-V SoC I've never seen before.
Core changes:
- Open code PINCTRL_FUNCTION_DESC() instead of defining a complex
macro only used in one place
- Add pinmux_generic_add_pinfunction() helper and use this in a few
drivers
New drivers:
- Amlogic S7, S7D and S6 pin control support
- Eswin EIC7700 pin control support
- Qualcomm PMIV0104, PM7550 and Milos pin control support
Because of unhelpful numbering schemes, the Qualcomm driver now
needs to start to rely on SoC codenames
- STM32 HDP pin control support
- Mediatek MT8189 pin control support
Improvements:
- Switch remaining pin control drivers over to the new GPIO set
callback that provides a return value
- Support RSVD (reserved) pins in the STM32 driver
- Move many fixed assignments over to pinctrl_desc definitions
- Handle multiple TLMM regions in the Qualcomm driver"
* tag 'pinctrl-v6.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: (105 commits)
pinctrl: mediatek: Add pinctrl driver for mt8189
dt-bindings: pinctrl: mediatek: Add support for mt8189
pinctrl: aspeed-g6: Add PCIe RC PERST pin group
pinctrl: ingenic: use pinmux_generic_add_pinfunction()
pinctrl: keembay: use pinmux_generic_add_pinfunction()
pinctrl: mediatek: moore: use pinmux_generic_add_pinfunction()
pinctrl: airoha: use pinmux_generic_add_pinfunction()
pinctrl: equilibrium: use pinmux_generic_add_pinfunction()
pinctrl: provide pinmux_generic_add_pinfunction()
pinctrl: pinmux: open-code PINCTRL_FUNCTION_DESC()
pinctrl: ma35: use new GPIO line value setter callbacks
MAINTAINERS: add Clément Le Goffic as STM32 HDP maintainer
pinctrl: stm32: Introduce HDP driver
dt-bindings: pinctrl: stm32: Introduce HDP
pinctrl: qcom: Add Milos pinctrl driver
dt-bindings: pinctrl: document the Milos Top Level Mode Multiplexer
pinctrl: qcom: spmi: Add PM7550
dt-bindings: pinctrl: qcom,pmic-gpio: Add PM7550 support
pinctrl: qcom: spmi: Add PMIV0104
dt-bindings: pinctrl: qcom,pmic-gpio: Add PMIV0104 support
...
Pull remoteproc updates from Bjorn Andersson:
- Make the Xilinx remoteproc driver support running on only a single
core, disable still unsupported remoteproc features, and stop the
remoteproc on shutdown to facilitate kexec.
- Conclude the renaming of the Qualcomm ADSP driver to "PAS" that was
started many years ago.
* tag 'rproc-v6.17' of git://git.kernel.org/pub/scm/linux/kernel/git/remoteproc/linux:
remoteproc: xlnx: Fix kernel-doc warnings
remoteproc: xlnx: Disable unsupported features
remoteproc: xlnx: Add shutdown callback
remoteproc: xlnx: Allow single core use in split mode
dt-bindings: remoteproc: qcom,sa8775p-pas: Correct the interrupt number
remoteproc: Don't use %pK through printk
dt-bindings: remoteproc: qcom,sm8150-pas: Document QCS615 remoteproc
remoteproc: qcom: pas: Conclude the rename from adsp
Pull PCI updates from Bjorn Helgaas:
"Enumeration:
- Allow built-in drivers, not just modular drivers, to use async
initial probing (Lukas Wunner)
- Support Immediate Readiness even on devices with no PM Capability
(Sean Christopherson)
- Consolidate definition of PCIE_RESET_CONFIG_WAIT_MS (100ms), the
required delay between a reset and sending config requests to a
device (Niklas Cassel)
- Add pci_is_display() to check for "Display" base class and use it
in ALSA hda, vfio, vga_switcheroo, vt-d (Mario Limonciello)
- Allow 'isolated PCI functions' (multi-function devices without a
function 0) for LoongArch, similar to s390 and jailhouse (Huacai
Chen)
Power control:
- Add ability to enable optional slot clock for cases where the PCIe
host controller and the slot are supplied by different clocks
(Marek Vasut)
PCIe native device hotplug:
- Fix runtime PM ref imbalance on Hot-Plug Capable ports caused by
misinterpreting a config read failure after a device has been
removed (Lukas Wunner)
- Avoid creating a useless PCIe port service device for pciehp if the
slot is handled by the ACPI hotplug driver (Lukas Wunner)
- Ignore ACPI hotplug slots when calculating depth of pciehp hotplug
ports (Lukas Wunner)
Virtualization:
- Save VF resizable BAR state and restore it after reset (Michał
Winiarski)
- Allow IOV resources (VF BARs) to be resized (Michał Winiarski)
- Add pci_iov_vf_bar_set_size() so drivers can control VF BAR size
(Michał Winiarski)
Endpoint framework:
- Add RC-to-EP doorbell support using platform MSI controller,
including a test case (Frank Li)
- Allow BAR assignment via configfs so platforms have flexibility in
determining BAR usage (Jerome Brunet)
Native PCIe controller drivers:
- Convert amazon,al-alpine-v[23]-pcie, apm,xgene-pcie,
axis,artpec6-pcie, marvell,armada-3700-pcie, st,spear1340-pcie to
DT schema format (Rob Herring)
- Use dev_fwnode() instead of of_fwnode_handle() to remove OF
dependency in altera (fixes an unused variable), designware-host,
mediatek, mediatek-gen3, mobiveil, plda, xilinx, xilinx-dma,
xilinx-nwl (Jiri Slaby, Arnd Bergmann)
- Convert aardvark, altera, brcmstb, designware-host, iproc,
mediatek, mediatek-gen3, mobiveil, plda, rcar-host, vmd, xilinx,
xilinx-dma, xilinx-nwl from using pci_msi_create_irq_domain() to
using msi_create_parent_irq_domain() instead; this makes the
interrupt controller per-PCI device, allows dynamic allocation of
vectors after initialization, and allows support of IMS (Nam Cao)
APM X-Gene PCIe controller driver:
- Rewrite MSI handling to MSI CPU affinity, drop useless CPU hotplug
bits, use device-managed memory allocations, and clean things up
(Marc Zyngier)
- Probe xgene-msi as a standard platform driver rather than a
subsys_initcall (Marc Zyngier)
Broadcom STB PCIe controller driver:
- Add optional DT 'num-lanes' property and if present, use it to
override the Maximum Link Width advertised in Link Capabilities
(Jim Quinlan)
Cadence PCIe controller driver:
- Use PCIe Message routing types from the PCI core rather than
defining private ones (Hans Zhang)
Freescale i.MX6 PCIe controller driver:
- Add IMX8MQ_EP third 64-bit BAR in epc_features (Richard Zhu)
- Add IMX8MM_EP and IMX8MP_EP fixed 256-byte BAR 4 in epc_features
(Richard Zhu)
- Configure LUT for MSI/IOMMU in Endpoint mode so Root Complex can
trigger doorbel on Endpoint (Frank Li)
- Remove apps_reset (LTSSM_EN) from
imx_pcie_{assert,deassert}_core_reset(), which fixes a hotplug
regression on i.MX8MM (Richard Zhu)
- Delay Endpoint link start until configfs 'start' written (Richard
Zhu)
Intel VMD host bridge driver:
- Add Intel Panther Lake (PTL)-H/P/U Vendor ID (George D Sworo)
Qualcomm PCIe controller driver:
- Add DT binding and driver support for SA8255p, which supports ECAM
for Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port
resets in a Root Port stanza and deprecate describing them in the
host bridge; this makes it possible to support multiple Root Ports
in the future (Krishna Chaitanya Chundru)
- Add Qualcomm QCS615 to SM8150 DT binding (Ziyue Zhang)
- Add Qualcomm QCS8300 to SA8775p DT binding (Ziyue Zhang)
- Drop TBU and ref clocks from Qualcomm SM8150 and SC8180x DT
bindings (Konrad Dybcio)
- Document 'link_down' reset in Qualcomm SA8775P DT binding (Ziyue
Zhang)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Rockchip PCIe controller driver:
- Drop unused PCIe Message routing and code definitions (Hans Zhang)
- Remove several unused header includes (Hans Zhang)
- Use standard PCIe config register definitions instead of
rockchip-specific redefinitions (Geraldo Nascimento)
- Set Target Link Speed to 5.0 GT/s before retraining so we have a
chance to train at a higher speed (Geraldo Nascimento)
Rockchip DesignWare PCIe controller driver:
- Prevent race between link training and register update via DBI by
inhibiting link training after hot reset and link down (Wilfred
Mallawa)
- Add required PCIE_RESET_CONFIG_WAIT_MS delay after Link up IRQ
(Niklas Cassel)
Sophgo PCIe controller driver:
- Add DT binding and driver for Sophgo SG2044 PCIe controller driver
in Root Complex mode (Inochi Amaoto)
Synopsys DesignWare PCIe controller driver:
- Add required PCIE_RESET_CONFIG_WAIT_MS after waiting for Link up on
Ports that support > 5.0 GT/s. Slower Ports still rely on the
not-quite-correct PCIE_LINK_WAIT_SLEEP_MS 90ms default delay while
waiting for the Link (Niklas Cassel)"
* tag 'pci-v6.17-changes' of git://git.kernel.org/pub/scm/linux/kernel/git/pci/pci: (116 commits)
dt-bindings: PCI: qcom,pcie-sa8775p: Document 'link_down' reset
dt-bindings: PCI: Remove 83xx-512x-pci.txt
dt-bindings: PCI: Convert amazon,al-alpine-v[23]-pcie to DT schema
dt-bindings: PCI: Convert marvell,armada-3700-pcie to DT schema
dt-bindings: PCI: Convert apm,xgene-pcie to DT schema
dt-bindings: PCI: Convert axis,artpec6-pcie to DT schema
dt-bindings: PCI: Convert st,spear1340-pcie to DT schema
PCI: Move is_pciehp check out of pciehp_is_native()
PCI: pciehp: Use is_pciehp instead of is_hotplug_bridge
PCI/portdrv: Use is_pciehp instead of is_hotplug_bridge
PCI/ACPI: Fix runtime PM ref imbalance on Hot-Plug Capable ports
selftests: pci_endpoint: Add doorbell test case
misc: pci_endpoint_test: Add doorbell test case
PCI: endpoint: pci-epf-test: Add doorbell test support
PCI: endpoint: Add pci_epf_align_inbound_addr() helper for inbound address alignment
PCI: endpoint: pci-ep-msi: Add checks for MSI parent and mutability
PCI: endpoint: Add RC-to-EP doorbell support using platform MSI controller
PCI: dwc: Add Sophgo SG2044 PCIe controller driver in Root Complex mode
PCI: vmd: Switch to msi_create_parent_irq_domain()
PCI: vmd: Convert to lock guards
...
Pull dmaengine updates from Vinod Koul:
"Core:
- Managed API for dma channel request
New support:
- Sophgo CV18XX/SG200X dmamux driver
- Qualcomm Milos GPI, sc8280xp GPI support
Updates:
- Conversion of brcm,iproc-sba and marvell,orion-xor binding
- Unused code cleanup across drivers"
* tag 'dmaengine-6.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/dmaengine: (23 commits)
dt-bindings: dma: fsl-mxs-dma: allow interrupt-names for fsl,imx23-dma-apbx
dmaengine: xdmac: make it selectable for ARCH_MICROCHIP
dt-bindings: dma: Convert marvell,orion-xor to DT schema
dt-bindings: dma: Convert brcm,iproc-sba to DT schema
dmaengine: nbpfaxi: Add missing check after DMA map
dmaengine: mv_xor: Fix missing check after DMA map and missing unmap
dt-bindings: dma: qcom,gpi: document the Milos GPI DMA Engine
dmaengine: idxd: Remove __packed from structures
dmaengine: ti: Do not enable by default during compile testing
dmaengine: sh: Do not enable SH_DMAE_BASE by default during compile testing
dmaengine: idxd: Fix warning for deadcode.deadstore
dmaengine: mmp: Fix again Wvoid-pointer-to-enum-cast warning
dmaengine: fsl-qdma: Add missing fsl_qdma_format kerneldoc
dmaengine: qcom: gpi: Drop unused gpi_write_reg_field()
dmaengine: fsl-dpaa2-qdma: Drop unused mc_enc()
dmaengine: dw-edma: Drop unused dchan2dev() and chan2dev()
dmaengine: stm32: Don't use %pK through printk
dmaengine: stm32-dma: configure next sg only if there are more than 2 sgs
dmaengine: sun4i: Simplify error handling in probe()
dt-bindings: dma: qcom,gpi: Document the sc8280xp GPI DMA engine
...
Pull more sound updates from Takashi Iwai:
"For catching up the remaining stuff for 6.17: only small updates and
the rest are mostly small fixes.
- Fixes in HD-audio codec driver Kconfig, so that configurations can
be more easily/safely carried between different versions
- Fixes in ASoC SDCA, FSL xcvr, AW88399
- ASoC IMX WM8524 support
- HD-audio and USB-audio quirks and fixes
- A minor selftest fix"
* tag 'sound-6.17-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
ALSA: usb: scarlett2: Fix missing NULL check
mips: Update HD-audio configs again
LoongArch: Update HD-audio codec configs
arm: Update HD-audio configs again
selftests: ALSA: fix memory leak in utimer test
ALSA: usb-audio: Add DSD support for Comtrue USB Audio device
ALSA: hda/hdmi: Enable drivers as default
ALSA: hda/cirrus: Enable drivers as default
ALSA: hda/realtek: Enable drivers as default
ALSA: hda/realtek - Fix mute LED for HP Victus 16-d1xxx (MB 8A26)
ALSA: hda/realtek - Fix mute LED for HP Victus 16-s0xxx
ALSA: hda: Fix the wrong register was used for DVC of TAS2770
ALSA: scarlett2: Add retry on -EPROTO from scarlett2_usb_tx()
ALSA: hda/realtek - Fix mute LED for HP Victus 16-r1xxx
ASoC: codecs: Add acpi_match_table for aw88399 driver
ASoC: dt-bindings: atmel,at91-ssc: add microchip,sam9x7-ssc
ASoC: imx-card: Add WM8524 support
ASoC: fsl_xcvr: get channel status data with firmware exists
ASoC: fsl_xcvr: get channel status data when PHY is not exists
ASoC: SDCA: Add support for -cn- value properties
...
- Export DWC MSI controller related APIs for use by upcoming DWC-based ECAM
implementation (Mayank Rana)
- Rename gen_pci_init() to pci_host_common_ecam_create() and export for use
by controller drivers (Mayank Rana)
- Add DT binding and driver support for SA8255p, which supports ECAM for
Configuration Space access (Mayank Rana)
- Update DT binding and driver to describe PHYs and per-Root Port resets in
a Root Port stanza and deprecate describing them in the host bridge; this
makes it possible to support multiple Root Ports in the future (Krishna
Chaitanya Chundru)
* pci/controller/qcom:
PCI: qcom: Add support for parsing the new Root Port binding
dt-bindings: PCI: qcom: Move PHY & reset GPIO to Root Port node
PCI: qcom: Add support for Qualcomm SA8255p based PCIe Root Complex
dt-bindings: PCI: qcom,pcie-sa8255p: Document ECAM compliant PCIe root complex
PCI: host-generic: Rename and export gen_pci_init() for PCIe controller drivers
PCI: dwc: Export DWC MSI controller related APIs
- Add optional DT 'num-lanes' property and if present, use it to override
the Maximum Link Width advertised in Link Capabilities (Jim Quinlan)
* pci/controller/brcmstb:
PCI: brcmstb: Replace open coded value with PCIE_T_RRS_READY_MS
MAINTAINERS: Drop Nicolas from maintaining pcie-brcmstb
PCI: brcmstb: Set MLW based on "num-lanes" DT property if present
dt-bindings: PCI: brcm,stb-pcie: Add num-lanes property
