both of these fns are using ifdef CONFIG_NETWORK_SECMARK and related
to AppArmor's secmark based mediation, so move them together.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Make sure all the network mediation hooks are next to each other in
a logical block. This just makes it easier to read/understand the
network mediation code.
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Make it easier for distros to support the network backwards compat
patch by refactoring the code to minimize the changes needed.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Continue preparing for fine grained inet mediation by setting up the
stacked mediation callback. This lifts address mapping and audit
context setup out of the stacking loop and pushing the mediation down
into the callback fn.
While this patch sets up the structure for fine grained mediation it
does not change mediation and the callback fns only call the default
mediation that will be used when fine grained inet mediation is not
available.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Refactor network mediation, introducing the stub code for the fine
grained inet mediation. This is a preparatory step and does not change
mediation.
Signed-off-by: John Johansen <john.johansen@canonical.com>
Hide the functionality of determinig unix mediation behind its own fn
so it is easier to adjust the test in the future as it has different
requirements than the other socket mediation.
Signed-off-by: John Johansen <john.johansen@canonical.com>
copy_from_user does not return an error code and the check should be
setting the error code.
Fixes: 8b236f99edf8 ("apparmor: Initial support for compressed policies")
Signed-off-by: John Johansen <john.johansen@canonical.com>
aa_vec_unique() null terminates at vec[n - dups] when VEC_FLAG_TERMINATE
is passed. If the components are all distinct no duplicates are dropped,
dups is 0 and the terminator goes to vec[n], so the caller has to provide
room for n + 1 entries.
aa_label_strn_parse() sets up its vector with vec_setup(profile, vec, len,
gfp) and then calls aa_vec_unique(vec, len, VEC_FLAG_TERMINATE), but
vec_setup() does not reserve the terminator entry. Up to LOCAL_VEC_ENTRIES
it uses the local array of LOCAL_VEC_ENTRIES pointers, above that it
allocates exactly len pointers. The terminator therefore lands one entry
past the end of the local array when len is LOCAL_VEC_ENTRIES, and one
entry past the end of the allocation when len is larger.
len comes from the number of "//&" separated components in the label name
and label_count_strn_entries() does not bound it. An unprivileged task
reaches the parse by writing to /proc/self/attr/apparmor/current or through
lsm_set_self_attr(2), both of which go through do_setattr(), and the name
is parsed before the change_profile permission is checked.
The query_label() path behind the securityfs .access file, which is
mode 0666, performs no permission check at all. Every component has to
resolve to a loaded profile, so a system with policy loaded is required.
The other two VEC_FLAG_TERMINATE users work on a label vec that
aa_label_alloc() has already sized with "+ 1 for null terminator entry on
vec". Reserve the same entry in vec_setup() and DEFINE_VEC(). Passing
len + 1 from the caller instead would move len == LOCAL_VEC_ENTRIES out of
the local array and into kzalloc().
Fixes: f1bd904175 ("apparmor: add the base fns() for domain labels")
Cc: stable@vger.kernel.org
Signed-off-by: Hyunwoo Kim <imv4bel@gmail.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
verify_tags() validates the tagset table unpacked from a policy blob.
For each set it reads a count and checks that advancing the index by
that count stays inside sets.table[]:
u32 cnt = tags->sets.table[i];
if (i+cnt >= tags->sets.size) {
i, cnt and sets.size are all u32, so i+cnt is evaluated modulo 2^32.
sets.table[] is filled by unpack_tagsets() with aa_unpack_u32(), so
every entry is a raw unbounded 32-bit word taken from the policy blob,
and verify_tags() is the function that is supposed to validate it. A
count close to U32_MAX makes the sum wrap to a small value, the guard
passes, and the inner loop then walks sets.table[++i] past the end of
the kcalloc(size, sizeof(u32)) allocation.
Note that sets.size is bounded by 65535, because unpack_tagsets() reads
it with aa_unpack_array() as a u16, so the wrap cannot be reached by
growing the table; it is reached purely through the attacker-supplied
count.
With sets.size = 2 and sets.table = { 0, 0xffffffff }:
i = 0: cnt = 0, guard 0 + 0 >= 2 is false, inner loop does not run
i = 1: cnt = 0xffffffff, guard (1 + 0xffffffff) mod 2^32 == 0 >= 2 is
false, so the guard is bypassed and the inner loop reads
sets.table[2] -- one element past a two element allocation
The walk continues until an out-of-bounds value happens to be >=
hdrs.size or the access faults, so a crafted policy yields an
out-of-bounds read on the policy load path
(aa_replace_profiles -> aa_unpack -> unpack_policydb -> unpack_tags ->
verify_tags). unpack_tags() runs before the perms and DFA tables are
unpacked, so no other table needs to be well formed to reach it.
Policy load is gated by aa_may_manage_policy(), which checks
CAP_MAC_ADMIN relative to the subject's own user namespace rather than
the init user namespace, so with the default
unprivileged_userns_apparmor_policy=1 the path is reachable from an
unprivileged task in a matched-level nested namespace, not only by a
globally privileged one.
Perform the addition in u64 so that it cannot wrap, restoring the
intended i + cnt < sets.size guarantee.
Fixes: 3d28e2397a ("apparmor: add support loading per permission tagging")
Signed-off-by: Fabrice Derepas <fabrice.derepas@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
The {begin,end}_current_label_crit_section() has the same issue as the
{__begin,__end} version. That is the check to see if the label has
been updated in the end check forces an unnecessary memory barrier.
We can optimize this the same way we do with the {__begin,__end}
variant by passing in a local variable that carries the state
information from the begin check into the end check.
No functional change.
Signed-off-by: John Johansen <john.johansen@canonical.com>
AppArmor's begin_current_label_crit_section() is a scary function called
from lots of LSM hooks (in particular VFS/socket-related ones) that checks
if the label referenced by the current creds is marked FLAG_STALE, and if
so, attempts to use aa_replace_current_label() to replace the creds with an
updated version that uses a new label.
The first problem with this is that it would directly lead to UAF of
`struct cred` if anything in the kernel takes a pointer to the current
creds and accesses these past a security hook invocation that replaces
creds, like so:
```
const struct cred *cred = current_cred();
alloc_file_pseudo(...);
uid_t uid = cred->euid;
```
I don't know if anything in the kernel actually does this, but I think it
is very surprising that this pattern could lead to UAF.
The second problem is that things go wrong when aa_replace_current_label()
runs with overridden credentials. aa_replace_current_label() bails out if
`current_cred() != current_real_cred()` (mirroring the check in
proc_pid_attr_write()), but this check can't actually reliably detect
overridden credentials because the overridden creds can be the same as the
objective creds.
So in approximately the following scenario, things go wrong:
1. task begins with <creds A> (as both objective and subjective creds),
with refcount=2
2. task grabs an extra reference on <creds A> for overriding
3. task calls override_creds(<creds A>), which returns a pointer to the old
subjective creds (<creds A>)
4. task enters AppArmor LSM hook
5. AppArmor checks that objective/subjective creds are equal
6. AppArmor replaces both cred pointers with <creds B> and drops 2 refs on
<creds A>
7. task leaves AppArmor LSM hook
8. task calls revert_creds(<creds A>)
9. now task->cred is <creds A> while task->real_cred is <creds B>, but the
task_struct logically holds two references to <creds B>
10. another task drops the extra reference on <creds A> that was used for
overriding, refcount drops to 0
11. now task->real_cred points to freed creds
At this point, any access to current_cred() will be UAF.
I have a test case where I run aa-disable on a profile while a process
using that profile is blocked on splice() from a FUSE passthrough file into
a full pipe; after the profile update, the pipe becomes empty, splice()
resumes, the credentials go out of sync, and a subsequent getuid() syscall
results in a KASAN UAF splat.
To fix this, instead of directly replacing creds, do it via task_work that
will run at the end of the current syscall. (The point in time at which the
cred replacement happens should have no correctness impact; it is just a
performance optimization to avoid unnecessarily touching the refcount of
the new label.)
Note that AppArmor still performs direct cred replacements in the
sb_pivotroot LSM hook after this change, and that direct cred replacements
can still happen in VFS ->write() callbacks via proc_pid_attr_write().
There are two options for what to do with aa_dup_task_ctx(): Either
explicitly reset new->label_replacement_pending after the entire
aa_task_ctx has been copied, or switch to manually copying members over.
I am switching to manually copying members over because that should make
bugs more obvious.
Cc: stable@vger.kernel.org
Fixes: c75afcd153 ("AppArmor: contexts used in attaching policy to system objects")
Signed-off-by: Jann Horn <jannh@google.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
SEND_SIG_NOINFO is defined as ((struct kernel_siginfo *) 0), so passing
NULL works, but:
- this works "by accident" and looks as if the caller doesn't understand
the signal sending API.
- more importantly, this hides the usage of SEND_SIG_NOINFO from grep,
and this is really bad.
Signed-off-by: Oleg Nesterov <oleg@redhat.com>
Acked-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
decompress_zstd() is used in two cases:
- CONFIG SECURITY_APPARMOR_COMPRESSED_POLICY: which allows for
compressed policy to be loaded
- CONFIG_SECURITY_APPARMOR_EXPORT_BINARY: which allows introspecting
loaded policy, that is stored in compressed form until it is needed.
When neither of these are selected there is no need for decpress_zstd(),
which results in the decompressed_zstd defined but not used message.
Only define decmpress_zstd() if either of those config options are
enabled. The stub routine is not needed because all calling code is
gated by one of those config options.
Fixes: 1c5f27e845 ("apparmor: Fix build failure when ZSTD_DECOMPRESS is not enabled")
Signed-off-by: John Johansen <john.johansen@canonical.com>
When CONFIG_ZSTD_DECOMPRESS is not enabled, and neither
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY nor
CONFIG_SECURITY_APPARMOR_COMPRESSED_POLICY are enabled.
The build will fail with implicit declaration of function
'decompress_zstd' because there is not an appropriate stub function,
for when the zstd decompression isn't enabled.
In addition fix compress_min, and compress_max to be conditional on
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY, as they are used with the
exported policy.
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202608010834.9yIVzhG2-lkp@intel.com/
Fixes: 1c5f27e845 ("apparmor: Fix build failure when ZSTD_DECOMPRESS is not enabled")
Signed-off-by: John Johansen <john.johansen@canonical.com>
commit
17b5758bf3 ("apparmor: Initial support for compressed policies")
added the ability for apparmor to load compressed policy, unfortunately
it did not add a config option or select CONFIG_ZSTD_DECOMPRESS
which it depends on, leading to the following build failure
apparmorfs.c makes calls into zstd_*() even when
CONFIG_SECURITY_APPARMOR_EXPORT_BINARY is not set, causing
build errors:
/usr/bin/ld.bfd: security/apparmor/apparmorfs.o: in function `policy_update':
apparmorfs.c:(.text+0x1307): undefined reference to `zstd_get_frame_header'
/usr/bin/ld.bfd: apparmorfs.c:(.text+0x1359): undefined reference to `zstd_dctx_workspace_bound'
/usr/bin/ld.bfd: apparmorfs.c:(.text+0x13f7): undefined reference to `zstd_init_dctx'
/usr/bin/ld.bfd: apparmorfs.c:(.text+0x140c): undefined reference to `zstd_decompress_dctx'
/usr/bin/ld.bfd: apparmorfs.c:(.text+0x1411): undefined reference to `zstd_is_error'
Add a new config option to enable compress policy loading as using
the existing CONFIG_SECURITY_APPARMOR_EXPORT_BINARY is in appropriate
as that is about retaining loaded policy so that it can be introspected
at a later date.
Fixes: 17b5758bf3 ("apparmor: Initial support for compressed policies")
Reviewed-by: Georgia Garcia <georgia.garcia@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Warning: security/apparmor/apparmorfs.c:501 function parameter 'compressed_data' not described in 'aa_get_data_from_compressed'
Warning: security/apparmor/apparmorfs.c:501 function parameter 'compressed_data' not described in 'aa_get_data_from_compressed'
Warning: security/apparmor/apparmorfs.c:501 function parameter 'compressed_data' not described in 'aa_get_data_from_compressed'
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202607240144.4iqulDF1-lkp@intel.com/
Signed-off-by: John Johansen <john.johansen@canonical.com>
Make use of the audit_log_n_untrustedstring() function to simplify the
code in aa_label_xaudit().
Signed-off-by: Paul Moore <paul@paul-moore.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
When policy is compressed it is given a header in userspace. The
parser knows to strip this header, but alternate profile loaders like
aa-load and systemd have not been updated so that they know to strip
the header.
This allows those loaders to just load the binary file without having
to be updated.
Fixes: 17b5758bf3 ("apparmor: Initial support for compressed policies")
Signed-off-by: John Johansen <john.johansen@canonical.com>
This patch allows policies to be compressed in userspace and be sent to
the kernel through the existing ".load" and ".replace" kernel interfaces.
The benefits of this approach are:
- Save kernel time when loading policies
- Allow userspace to provide a higher level of compression than the one
provided by the kernel (ZSTD_CLEVEL_DEFAULT), thus saving space.
- Allow small embedded systems to only store the compressed version of
policies in userspace, saving memory.
Userspace-compressed policies improve system time by up to ~30% for big
profiles.
Signed-off-by: Maxime Bélair <maxime.belair@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Besides of resolving clangd IDE warnings, self-contained headers will be
less likely to break if the surrounding includes in .c files using them
change.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
While the #ifdef guards prevent the circular include from blowing up,
policy.h does not actually need anything from net.h. Remove, that include
and instead include net.h in the other files that need it.
Signed-off-by: Ryan Lee <ryan.lee@canonical.com>
Signed-off-by: John Johansen <john.johansen@canonical.com>
Pull NTB updates from Jon Mason:
"An EPF bug fix to prevent an invalid unmap during device removal,
along with documentation fixes and minor AMD driver cleanups"
* tag 'ntb-7.2' of https://github.com/jonmason/ntb:
ntb: amd: Use named initializer for pci_device_id::driver_data
NTB: fix kernel-doc warnings in ntb.h
NTB: epf: Avoid pci_iounmap() with offset when PEER_SPAD and CONFIG share BAR
ntb_hw_amd: Fix incorrect debug message in link disable path
Pull more input updates from Dmitry Torokhov:
- Updates to Synaptics RMI4 driver to fix potential OOB accesses in F30
and F3A keymap handling
- A workaround in Synaptics RMI4 to tolerate buggy firmware on some
touchpads (e.g. ThinkPad T14 Gen 1) that report incomplete register
descriptor structures, preventing probe failures
- A revert of an incorrect register descriptor address calculation in
Synaptics RMI4 driver
- A fix for a regression in HP GSC PS/2 (gscps2) driver where the
receive buffer write index was not advanced, leaving keyboard and
mouse unusable.
* tag 'input-for-v7.2-rc0-2' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
Input: gscps2 - advance receive buffer write index
Input: rmi4 - tolerate short register descriptor structure
Revert "Input: rmi4 - fix register descriptor address calculation"
Input: synaptics-rmi4 - bound the F30 keymap to the GPIO/LED count
Input: synaptics-rmi4 - bound the F3A keymap to the GPIO count
Pull pwm fixes from Uwe Kleine-König:
"Two more fixes that I managed to put into the public branch merged
into next before my first pull request but missed to include them in
it.
The first change is a relevant change that fixes misconfigurations due
to a variable overflow. The second is only cosmetic but very obviously
an improvement"
* tag 'pwm/for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux:
pwm: rzg2l-gpt: Add missing newlines to dev_err_probe() messages
pwm: rzg2l-gpt: Fix period_ticks type from u32 to u64
Pull more fbdev updates from Helge Deller:
"Fixes for generic fbdev & fbcon code for the handling of modelists
and preventing a potential NULL ptr dereference in the console code.
Fix missed cleanups in the error path of various fbdev drivers.
And Uwe Kleine-König contributed a cleanup patch to use named
initializers in the vga16fb driver"
* tag 'fbdev-for-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/linux-fbdev:
fbdev: Fix fb_new_modelist to prevent null-ptr-deref in fb_videomode_to_var
fbcon: fix NULL pointer dereference for a console without vc_data
fbdev: fix use-after-free in store_modes()
fbdev: viafb: return an error when DMA copy times out
fbdev: goldfishfb: fail pan display on base-update timeout
fbdev: fbcon: fix out-of-bounds read in err_out of fbcon_do_set_font()
fbdev: pm2fb: unwind WC setup on probe failure
fbdev: vga16fb: Drop unused assignment of platform_device_id driver data
Pull sound fixes from Takashi Iwai:
"A collection of small bug fixes accumulated over the last week.
Most are device-specific fixes while there are a few core fixes as
well.
Here are the highlights:
ALSA Core:
- A fix for an uninitialised heap leak in ALSA sequencer core
- A fix for error handling/resource leak in compress-offload API
USB-audio:
- A teardown-ordering fix in USB MIDI 2.0 to prevent use-after-free
- Bounds and length checks for packet data in Native Instruments
caiaq / Traktor Kontrol input parsers
- Avoidance of expensive kobject path lookups in DualSense controller
matches
- Robustness/memory leak fixes for Qualcomm USB offload driver
- Focusrite Control Protocol (FCP) NULL-pointer dereference fix and a
new device quirk (ISA C8X)
- Device-specific quirks for Yamaha CDS3000 and SC13A
HD-Audio:
- A bunch of quirks and mute/mic-mute LED fixups for various laptops
(Acer, Clevo, Lenovo, HP)
ASoC & SoundWire:
- Avoid failing card registration if the device_link creation fails
- A workaround for SoundWire randconfig build failures by making
helper functions static inline
- Corrected MCLK reference validation for CS530x codecs
- Clean up of untested, problematic guard() macro replacements in
Rockchip SAI driver
- Fix for eDMA maxburst misalignment with channel count in Freescale
ASRC
- Miscellaneous hardware-specific fixes (qcom, rt5650, tlv320aic3x,
tas2781/3)
Others:
- Bounds and length checks for packet data in Apple iSight"
* tag 'sound-fix-7.2-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (46 commits)
ALSA: FCP: Fix NULL pointer dereference in interface lookup
ALSA: hda/realtek: Update Acer Nitro ANV15-41 quirk to enable mute LED
ASoC: fsl_asrc_dma: fix eDMA maxburst misalignment with channel count
ASoC: codecs: pcm512x: only print info once on no sclk
ASoC: tas2781: Update default register address to TAS2563
ALSA: firewire: isight: bound the sample count to the packet payload
ALSA: usb-audio: qcom: Free QMI handle
ALSA: hda: Add Lenovo Legion 7i 16IAX7 17AA3874 quirk
ALSA: usb-audio: avoid kobject path lookup in DualSense match
ALSA: hda/realtek: Add quirk for Acer Nitro ANV15-41
ASoC: soc-core: Don't fail if device_link could not be created
ASoC: rockchip: rockchip_sai: #include <linux/platform_device.h> explicitly
ALSA: seq: Fix uninitialised heap leak in snd_seq_event_dup()
ASoC: rt5575: Use __le32 for SPI burst write address
ASoC: tas2783: Update loaded firmware names to linux-firmware 20260519
ASoC: SDCA: Validate written enum value in ge_put_enum_double()
ASoC: realtek: Add back local call to sdw_show_ping_status()
ASoC: ti: Add back local call to sdw_show_ping_status()
ASoC: max98373: Add back local call to sdw_show_ping_status()
ASoC: es9356: Add back local call to sdw_show_ping_status()
...
Pull RTC updates from Alexandre Belloni:
"Most of the work and improvements are for features of the m41t93.
The ds1307 also gets support for OSF (Oscillator Stop Flag) for
new variants.
The pcap driver is being removed as the Motorola EZX support was
removed a while ago.
Subsystem:
- add rtc_read_next_alarm() to read next expiring timer
Drivers:
- ds1307: handle OSF for ds1337/ds1339/ds3231, add clock provider for
ds1307, fix wday for rx8130
- m41t93: DT support, alarm, clock provider, watchdog support
- mv: add suspend/resume support for wakeup
- pcap: remove driver
- renesas-rtca3: many fixes"
* tag 'rtc-7.2' of git://git.kernel.org/pub/scm/linux/kernel/git/abelloni/linux: (36 commits)
rtc: ds1307: update reference to removed CONFIG_RTC_DRV_DS1307_HWMON
platform/x86: amd-pmc: Fix S0i3 wakeup with alarmtimer
rtc: s35390a: fix typo in comment
rtc: cmos: unregister HPET IRQ handler on probe failure
rtc: ds1307: Fix off-by-one issue with wday for rx8130
dt-bindings: rtc: ds1307: Add epson,rx8901
rtc: bq32000: add delay between RTC reads
rtc: m41t93: Add watchdog support
rtc: m41t93: Add square wave clock provider support
rtc: m41t93: Add alarm support
rtc: m41t93: migrate to regmap api for register access
rtc: m41t93: add device tree support
dt-bindings: rtc: Add ST m41t93
rtc: ds1307: add support for clock provider in ds1307
rtc: mv: add suspend/resume support for wakeup
rtc: aspeed: add AST2700 compatible
dt-bindings: rtc: add ASPEED AST2700 compatible
rtc: interface: fix typos in rtc_handle_legacy_irq() documentation
rtc: msc313: fix NULL deref in shared IRQ handler at probe
rtc: remove unused pcap driver
...
Pull fscrypt fixes from Eric Biggers:
- Fix a bug where in a specific edge case, file contents en/decryption
could be done with the wrong data unit size
- Fix the data structure used for keeping track of users that have
added an fscrypt key to be a simple list instead of a 'struct key'
keyring
This fixes issues such as a lockdep report found by syzbot and
possible unintended interactions with the keyctl() system calls
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/fs/fscrypt/linux:
fscrypt: Replace mk_users keyring with simple list
fscrypt: Fix key setup in edge case with multiple data unit sizes
Commit 44f9200699 ("Input: gscps2 - use guard notation when
acquiring spinlock") moved the receive loop into gscps2_read_data()
and gscps2_report_data().
While moving the code, it preserved the writes to
buffer[ps2port->append], but omitted the following producer index
update from the original loop:
ps2port->append = (ps2port->append + 1) & BUFFER_SIZE;
As a result, append never advances. Since gscps2_report_data() only
reports bytes while act != append, the receive buffer always appears
empty and no keyboard or mouse data reaches the serio core.
Restore the omitted index update.
Fixes: 44f9200699 ("Input: gscps2 - use guard notation when acquiring spinlock")
Cc: stable@vger.kernel.org # 6.13+
Signed-off-by: Xu Rao <raoxu@uniontech.com>
Link: https://patch.msgid.link/460B5655BA580C60+20260624094739.850306-1-raoxu@uniontech.com
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
Some touchpads (e.g. ThinkPad T14 Gen 1) have buggy firmware that reports
a register descriptor structure size that is too small for the number of
registers it claims to have in the presence map. The remaining bytes in
the structure are 0, which with the new strict bounds checking causes the
parser to fail with -EIO, aborting the device probe.
Tolerate such short reads by dropping the remaining (unparseable or
0-size) registers from the list instead of failing the probe,
preventing the driver from trying to use them.
Fixes: 0adb483fbf ("Input: rmi4 - refactor register descriptor parsing")
Reported-by: Barry K. Nathan <barryn@pobox.com>
Tested-by: Barry K. Nathan <barryn@pobox.com>
Cc: stable@vger.kernel.org
Assisted-by: Antigravity:gemini-3.5-flash
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The register descriptor presence register is a packet register, which
means its bytes share a single RMI address. It does not occupy
consecutive addresses, and the register structure that follows it
is located at the next RMI address (presence_address + 1), not
(presence_address + presence_size).
Revert the incorrect address calculation introduced in commit
a98518e724.
Reported-by: "Barry K. Nathan" <barryn@pobox.com>
Tested-by: "Barry K. Nathan" <barryn@pobox.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dmitry Torokhov <dmitry.torokhov@gmail.com>
The current list initialisation depends on the well hidden two zeros in
the PCI_VDEVICE macro. Instead use a named initialisation that is more
robust and easier to understand.
Signed-off-by: Uwe Kleine-König (The Capable Hub) <u.kleine-koenig@baylibre.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Correct a function name and function parameter name to avoid
kernel-doc warnings:
Warning: include/linux/ntb.h:575 expecting prototype for
ntb_default_port_count(). Prototype was for ntb_default_peer_port_count()
instead
Warning: include/linux/ntb.h:590 function parameter 'pidx' not
described in 'ntb_default_peer_port_number'
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Acked-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
When BAR_PEER_SPAD and BAR_CONFIG share one PCI BAR, the module teardown
path ends up calling pci_iounmap() on the same iomem with some offset,
which is unnecessary and triggers a kernel warning like the following:
Trying to vunmap() nonexistent vm area (0000000069a5ffe8)
WARNING: mm/vmalloc.c:3470 at vunmap+0x58/0x68, CPU#5: modprobe/2937
[...]
Call trace:
vunmap+0x58/0x68 (P)
iounmap+0x34/0x48
pci_iounmap+0x2c/0x40
ntb_epf_pci_remove+0x44/0x80 [ntb_hw_epf]
pci_device_remove+0x48/0xf8
device_remove+0x50/0x88
device_release_driver_internal+0x1c8/0x228
driver_detach+0x50/0xb0
bus_remove_driver+0x74/0x100
driver_unregister+0x34/0x68
pci_unregister_driver+0x34/0xa0
ntb_epf_pci_driver_exit+0x14/0xfe0 [ntb_hw_epf]
[...]
Fix it by unmapping only when PEER_SPAD and CONFIG use difference bars.
Cc: stable@vger.kernel.org
Fixes: e75d5ae8ab ("NTB: epf: Allow more flexibility in the memory BAR map method")
Reviewed-by: Frank Li <Frank.Li@nxp.com>
Signed-off-by: Koichiro Den <den@valinux.co.jp>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
amd_ntb_link_disable() prints "Enabling Link" which is misleading.
Update the message to reflect that the link is being disabled.
Signed-off-by: Alok Tiwari <alok.a.tiwari@oracle.com>
Reviewed-by: Dave Jiang <dave.jiang@intel.com>
Signed-off-by: Jon Mason <jdmason@kudzu.us>
Pull drm fixes from Dave Airlie:
"These are just the fixes from our fixes branch, all pretty small and
scattered.
sysfb:
- drm/sysfb truncation and alignment fixes
edid:
- fix edid OOB read in tile parsing
- increase displayid topology id to correct size
nouveau:
- fix error handling paths in nouveau
amdxdna:
- get_bo_info fix
ivpu:
- fix leak when error handling in ivpu"
* tag 'drm-fixes-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel:
drm/sysfb: Avoid truncating maximum stride
drm/sysfb: Return errno code from drm_sysfb_get_visible_size()
drm/sysfb: Avoid possible truncation with calculating visible size
drm/sysfb: Do not page-align visible size of the framebuffer
drm/edid: fix OOB read in drm_parse_tiled_block()
drm/nouveau: fix reversed error cleanup order in ucopy functions
drm/nouveau/acr: fix missing nvkm_done() in error path of nvkm_acr_oneinit()
accel/amdxdna: Use caller client for debug BO sync
drm/displayid: fix Tiled Display Topology ID size
accel/ivpu: fix HWS command queue leak on registration failure
Pull drm merge window fixes from Dave Airlie:
"This is the merge window fixes from our next tree, i915/xe and amdgpu
make up all of it.
I've got a separate fixes pull from our fixes branch arriving after
this.
i915:
- Fix corrupted display output on GLK, #16209
- Add missing Spectre mitigation for parallel submit IOCTL
- MTL+ fix for DP resume
- clear CRTC blobs after dropping refs
- fix sharpness filter on DP MST
xe:
- Set TTM beneficial order to 9 in Xe
- Several error path cleanups
- Fix TDR for unstarted jobs on kernel queues
- Several TLB invalidation fixes related to suspending LR queues
- Some small RAS fixes
- Multi-queue suspend fix for LR queues
- Revert inclusion of NVL_S firmware
amdgpu:
- devcoredump fixes
- SMU15 fix
- Various irq put/get imbalance cleanup fixes
- 8K panel fix
- DCN3.5 fix
- lockdep fix
- Cleaner shader sysfs IB overflow fix
- Async flip fixes
- GET_MAPPING_INFO fix
- CP_GFX_SHADOW fix
- Ctx pstate handling fix
- GTT bo move handling fixes
- Old UVD BO placement fixes
- GC9 mode2 reset fix
- IH6.1 version fix
- Soft IH ring fix
amdkfd:
- Fix doorbell/mmio double unpin on free
- CRIU fixes
- SMI event fixes
- Sysfs teardown fix
- Various boundary checking fixes
- Various error checking fixes
- SVM fix"
* tag 'drm-next-2026-06-27' of https://gitlab.freedesktop.org/drm/kernel: (52 commits)
drm/i915/cdclk: Fix up CDCLK_FREQ_DECIMAL without a full PLL re-enable
drm/i915/gem: Add missing nospec on parallel submit slot
drm/amdgpu: Use system unbound workqueue for soft IH ring
amdgpu/ih6.1: Fix minor version
drm/amdkfd: Use exclusive bounds for SVM split alignment checks
drm/amdgpu/gfx9: Fix Ring and IB test fail after mode2
drm/amdgpu/uvd: Fix forcing MSG, FB BOs into VCPU segment when it isn't at 0 (v2)
drm/amdgpu/uvd: Place VCPU BO only in VRAM for UVD 4.x and older
drm/amdgpu: Fix amdgpu_bo_move() when old_mem and new_mem are both GTT
drm/amdgpu: Respect placement requirements in amdgpu_gtt_mgr functions
drm/amdgpu: Fix context pstate override handling
drm/amdkfd: Use memdup_array_user to copy data from/to user space at kfd ioctls
drm/amdkfd: check find_first_zero_bit before __set_bit on kfd->doorbell_bitmap
drm/amdkfd: Let driver decide buffer size at AMDKFD_IOC_GET_DMABUF_INFO ioctl
drm/amdgpu: fix recursive ww_mutex acquire in amdgpu_devcoredump_format
drm/amdgpu: convert amdgpu_vm_lock_by_pasid() to drm_exec
drm/amdgpu: Don't use UTS_RELEASE directly
drm/amdkfd: Fix NULL deref during sysfs teardown
drm/amdgpu: validate CP_GFX_SHADOW chunk size in CS pass1
drm/amdgpu: check amdgpu_vm_bo_find() result in GET_MAPPING_INFO
...
Pull ceph updates from Ilya Dryomov:
"This adds support for manual client session reset in CephFS, allowing
operators to get out of tricky livelock situations involving caps and
file locks without evicting the problematic client instance on the MDS
side or rebooting the client node both of which can be disruptive"
* tag 'ceph-for-7.2-rc1' of https://github.com/ceph/ceph-client:
ceph: add manual reset debugfs control and tracepoints
ceph: add client reset state machine and session teardown
ceph: add diagnostic timeout loop to wait_caps_flush()
ceph: harden send_mds_reconnect and handle active-MDS peer reset
ceph: use proper endian conversion for flock_len in reconnect
ceph: convert inode flags to named bit positions and atomic bitops
rbd: switch to dynamic root device
Pull thermal control fixes from Rafael Wysocki:
"These fix a failure path in an Intel thermal driver and prevent
thermal testing module code from being executed after it has been
freed:
- Fix dangling resources on thermal_throttle_online() failure in the
Intel thermal_throttle driver (Ricardo Neri)
- Eliminate a possibility of running thermal testing module code
after that module has been removed (Rafael Wysocki)"
* tag 'thermal-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: testing: zone: Flush work items during cleanup
thermal: intel: Fix dangling resources on thermal_throttle_online() failure
Pull power management fixes from Rafael Wysocki:
"These fix the schedutil cpufreq governor and drop a bogus warning
from the cpuidle core:
- Remove a misguided warning along with an inaccurate comment
next to it from the cpuidle core (Rafael Wysocki)
- Clear need_freq_update as appropriate in the .adjust_perf()
path of the schedutil cpufreq governor to avoid calling
cpufreq_driver_adjust_perf() unnecessarily on every scheduler
utilization update (Zhongqiu Han)"
* tag 'pm-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
cpuidle: Allow exit latency to exceed target residency
cpufreq: schedutil: Fix uncleared need_freq_update on the .adjust_perf() path
Pull ACPI support fixes and cleanups from Rafael Wysocki:
"These fix assorted issues and do cleanups in the ACPI support code,
which includes a fix for tools build breakage related to strncpy()
removal:
- Unbreak ACPICA tools builds after switching over to using
strscpy_pad() that is kernel-specific (Rafael Wysocki)
- Fix module parameter file paths in comments in the ACPI code
managing the general sysfs attributes (Zenghui Yu)
- Update kerneldoc comments in the ACPI resource management code to
follow the common style (Andy Shevchenko)
- Fix inverted interface check in ipmi_bmc_gone() that may cause ACPI
IPMI interfaces to be mishandled (Xu Rao)
- Add __cpuidle annotation to idle state management functions related
to ACPI _LPI to avoid trace-induced RCU warnings (Li RongQing)"
* tag 'acpi-7.2-rc1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: processor_idle: Mark LPI enter functions as __cpuidle
ACPICA: Unbreak tools build after switching over to strscpy_pad()
ACPI: IPMI: Fix inverted interface check in ipmi_bmc_gone()
ACPI: resource: Amend kernel-doc style
ACPI: sysfs: Fix path of module parameters in comments
Pull spi fixes from Mark Brown:
"A fairly unremarkable collection of fixes that came in over the
merge window, plus a new device ID for the DesignWare controller
in the StarFive JHB100 SoC.
There's a couple of core fixes included, one avoiding freeing an
empty resource in error handling cases and another which fixes a
NULL dereference which could be triggered by using an abnormal
device registration flow like driver_override"
* tag 'spi-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: imx: reconfigure for PIO when DMA cannot be started
spi: dw: Add support for snps,dwc-ssi-2.00a
spi: dt-bindings: snps,dw-apb-ssi: Add starfive,jhb100-spi
spi: rpc-if: Use correct device for hardware reinitialization on resume
spi: acpi: Free resource list at appropriate time
spi: dw: fix wrong BAUDR setting after resume
spi: uniphier: Fix completion initialization order before devm_request_irq()
spi: Add NULL check for spi_get_device_id() in spi_get_device_match_data()
Pull regulator fixes from Mark Brown:
"A couple of unremarkable driver specific fixes that came in during the
merge window"
* tag 'regulator-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: da9121: Use subvariant ids in the I2C table
regulator: pca9450: Correct default t_off_deb for PCA9451A/PCA9452
Pull regmap fix from Mark Brown:
"Ensure that we don't overwrite the error code when cleaning up a
failed cache initialisation, helping people debug issues if they
do arise"
* tag 'regmap-fix-v7.2-merge-window' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regcache: Do not overwrite error code when finalizing cache after error
