Add an "AVDD" regulator supply name alias to the supply-map which
gets registered for the INT3472 GPIO regulator.
This is necessary for the ov2680 driver which expects "AVDD" rather then
"avdd". Updating the ov2680 driver to use "avdd" is not possible because
that will break compatibility with existing DT / DTB files.
Tested-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230616172132.37859-5-hdegoede@redhat.com
On the Lenovo Miix 510-12IKB there is 1 GPIO regulator, with its GPIO
listed in the INT3472 device belonging to the OV5648 back sensor.
But this regulator also needs to be enabled for the OV2680 front sensor
to work.
Add support to skl_int3472_register_regulator() to add supply map entries
pointing to both sensors based on a DMI quirk table which gives the
dev_name part of the supply map for the second sensor (the sensor without
the GPIO listed in its matching INT3472 ACPI device).
Tested-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230616172132.37859-4-hdegoede@redhat.com
Currently the only 2 sensor_config-s both specify "avdd" as supply-id.
The INT3472 device is going to be the only supplier of a regulator for
the sensor device.
So there is no chance of collisions with other regulator suppliers
and it is undesirable to need to manually add new entries to
int3472_sensor_configs[] for each new sensor module which uses
a GPIO regulator.
Instead just always use "avdd" as supply-id when registering
the GPIO regulator.
If necessary for specific sensor drivers then other supply-ids can
be added as aliases in the future, adding aliases will be safe
since INT3472 will be the only regulator supplier for the sensor.
Cc: Bingbu Cao <bingbu.cao@intel.com>
Tested-by: Hao Yao <hao.yao@intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Link: https://lore.kernel.org/r/20230616172132.37859-3-hdegoede@redhat.com
The only sensor driver which needs GPIO remapping support is the ov2680
driver and ACPI enumeration support + other necessary changes to
the ov2680 driver were never upstreamed.
A new series updating the ov2680 driver is pending upstream now and
in this series the ov2680 driver is patched to look for "powerdown"
as con-id, instead of relying on GPIO remapping in the int3472 code,
so the GPIO remapping is no longer necessary.
Tested-by: Hao Yao <hao.yao@intel.com>
Reviewed-by: Daniel Scally <dan.scally@ideasonboard.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230616172132.37859-2-hdegoede@redhat.com
Fix issues identified in dytc_profile_refresh identified by lkp-tests.
drivers/platform/x86/thinkpad_acpi.c:10538
dytc_profile_refresh() error: uninitialized symbol 'funcmode'.
drivers/platform/x86/thinkpad_acpi.c:10531
dytc_profile_refresh() error: uninitialized symbol 'output'.
drivers/platform/x86/thinkpad_acpi.c:10537
dytc_profile_refresh() error: uninitialized symbol 'output'.
These issues should not lead to real problems in the field as the refresh
function should only be called if MMC or PSC mode enabled. But good to fix.
Thanks to Dan Carpenter and the lkp-tests project for flagging these.
Reported-by: kernel test robot <lkp@intel.com>
Reported-by: Dan Carpenter <error27@gmail.com>
Closes: https://lore.kernel.org/r/202306011202.1hbgLRD4-lkp@intel.com/
Fixes: 1bc5d819f0 ("platform/x86: thinkpad_acpi: Fix profile modes on Intel platforms")
Signed-off-by: Mark Pearson <mpearson-lenovo@squebb.ca>
Link: https://lore.kernel.org/r/20230606151804.8819-1-mpearson-lenovo@squebb.ca
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
This version addresses issues with core power configuration for
non CPU dies. Also address issue with JSON formatting of output.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
When core-power configuration or enabled is modified, this is only done
for compute dies. But the config must also be set to cores with no CPUs.
Without this the configuration is not affective.
On displaying config information, allow display for non compute dies
also.
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
commit c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake
support to pmc core driver") was supposed to add support for Meter
Lake P/M and mistakenly added support for Meteor Lake S instead. Meteor
Lake P/M support was added later and MTL-S support needs to be removed
since its currently assigned to the wrong register maps.
Fixes: c5ad454a12 ("platform/x86: intel/pmc/core: Add Meteor Lake support to pmc core driver")
Signed-off-by: Xi Pardee <xi.pardee@intel.com>
Signed-off-by: David E. Box <david.e.box@linux.intel.com>
Link: https://lore.kernel.org/r/20230601004706.871528-1-xi.pardee@intel.com
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
The added platform_driver support fails to link when I2C core support is
not rechable:
x86_64-linux-ld: drivers/platform/x86/lenovo-yogabook.o: in function `yogabook_pdev_probe':
lenovo-yogabook.c:(.text+0x5a5): undefined reference to `i2c_bus_type'
Add a Kconfig dependency to enforce a working configuration.
Fixes: 6df1523fa0 ("platform/x86: lenovo-yogabook: Add platform driver support")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Link: https://lore.kernel.org/r/20230519082606.375471-1-arnd@kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
On the Android yb1-x90f/l models there is not ACPI method to control
the keyboard backlight brightness. Instead the second PWM controller
is exposed directly to the OS there.
Add support for controlling keyboard backlight brightness on the Android
model by using the PWM subsystem to directly control the PWM.
The Android model also requires explicitly turning the backlight off
on suspend, which on the Windows model was done automatically.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-19-hdegoede@redhat.com
The Lenovo Yoga Book 1 comes in 2 versions.
Version 1: The yb1-x91f/l currently supported by lenovo-yogabook-wmi, which
has a WMI interface to deal with toggling the keyboard half between
touch-keyboard and wacom-digitizer mode.
Version 2: The yb1-x90f/l which is the same hardware shipping with Android
as factory OS. This version has a very different BIOS and ACPI tables which
lack the WMI interface.
Instead the x86-android-tablets.ko code which does devices instantiation
for devices missing from ACPI on various x86 Android tablets will
instantiate a platform device for the keyboard half touch-kbd/digitizer
toggle functionality.
This patch adds a platform driver to the lenovo-yogabook code which binds
to the platform device instantiated by x86-android-tablets.ko offering
touch-kbd/digitizer toggle functionality on the Android model.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-18-hdegoede@redhat.com
Group WMI specific code together. Note this just moves a bunch of
code-blocks around, not a single line is changed.
This is a preparation patch for making lenovo-yogabook-wmi also work
on the Android version of the Yoga Book 1 which does not have a WMI
interface to deal with toggling the keyboard half between
touch-keyboard and wacom-digitizer mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-16-hdegoede@redhat.com
Change the yogabook_wmi_ prefix of remaining generic (non WMI specific)
symbols to yogabook_ .
This is a preparation patch for making lenovo-yogabook-wmi also work
on the Android version of the Yoga Book 1 which does not have a WMI
interface to deal with toggling the keyboard half between
touch-keyboard and wacom-digitizer mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-15-hdegoede@redhat.com
Add a yogabook_toggle_digitizer_mode() helper function.
This is a preparation patch for making lenovo-yogabook-wmi also work
on the Android version of the Yoga Book 1 which does not have a WMI
interface to deal with toggling the keyboard half between
touch-keyboard and wacom-digitizer mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-14-hdegoede@redhat.com
Abstract kbd backlight setting.
This is a preparation patch for making lenovo-yogabook-wmi also work
on the Android version of the Yoga Book 1 which does not have a WMI
interface to deal with toggling the keyboard half between
touch-keyboard and wacom-digitizer mode.
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://lore.kernel.org/r/20230430165807.472798-13-hdegoede@redhat.com
