Russell King says:
====================
net: dsa: mv88e6xxx: prepare for phylink_pcs conversion
These two patches provide some preparation for converting the mv88e6xxx
DSA driver to use phylink_pcs rather than bolting the serdes bits into
the MAC calls.
In order to correctly drive mv88e6xxx hardware when the PCS code is
split, we need to force the link down while changing the configuration
of a port. This is provided for via the mac_prepare() and mac_finish()
methods, but DSA does not forward these on to DSA drivers.
Patch 1 adds support to the DSA core to forward these two methods to
DSA drivers, and patch 2 moves the code from mv88e6xxx_mac_config()
into the respective methods.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Move the link forcing out of mac_config() and into the mac_prepare()
and mac_finish() methods. This results in no change to the order in
which these operations are performed, but does mean when we convert
mv88e6xxx to phylink_pcs support, we will continue to preserve this
ordering.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Add DSA support for the phylink mac_prepare() and mac_finish() calls.
These were introduced as part of the PCS support to allow MACs to
perform preparatory steps prior to configuration, and finalisation
steps after the MAC and PCS has been configured.
Introducing phylink_pcs support to the mv88e6xxx DSA driver needs some
code moved out of its mac_config() stage into the mac_prepare() and
mac_finish() stages, and this commit facilitates such code in DSA
drivers.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
To keep things simple we used to include the uAPI header
in the kernel in the #include <linux/$family.h> format.
This works well enough, most of the genl families should
have headers in include/net/ so linux/$family.h ends up
referring to the uAPI header, anyway. And if it doesn't
no big deal, we'll just include more info than we need.
Unless that is there is a naming conflict. Someone recently
created include/linux/psp.h which will be a problem when
supporting the PSP protocol. (I'm talking about
work-in-progress patches, but it's just a proof that assuming
lack of name conflicts was overly optimistic.)
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Busy polling is currently not allowed on PREEMPT_RT, because it disables
preemption while invoking the NAPI callback. It is not possible to acquire
sleeping locks with disabled preemption. For details see commit
20ab39d13e ("net/core: disable NET_RX_BUSY_POLL on PREEMPT_RT").
However, strict cyclic and/or low latency network applications may prefer busy
polling e.g., using AF_XDP instead of interrupt driven communication.
The preempt_disable() is used in order to prevent the poll_owner and NAPI owner
to be preempted while owning the resource to ensure progress. Netpoll performs
busy polling in order to acquire the lock. NAPI is locked by setting the
NAPIF_STATE_SCHED flag. There is no busy polling if the flag is set and the
"owner" is preempted. Worst case is that the task owning NAPI gets preempted and
NAPI processing stalls. This is can be prevented by properly prioritising the
tasks within the system.
Allow RX_BUSY_POLL on PREEMPT_RT if NETPOLL is disabled. Don't disable
preemption on PREEMPT_RT within the busy poll loop.
Tested on x86 hardware with v6.1-RT and v6.3-RT on Intel i225 (igc) with
AF_XDP/ZC sockets configured to run in busy polling mode.
Suggested-by: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Signed-off-by: Kurt Kanzenbach <kurt@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lee Jones says:
====================
Immutable branch between LEDs and netdev due for the v6.5 merge window
Andrew Lunn says:
Christian Marangi and I will be continuing the work of offloading LED
blinking to Ethernet MAC and PHY LED controllers. The next set of
patches is again cross subsystem, LEDs and netdev. It also requires
some patches you have in for-leds-next:
a286befc24e8 leds: trigger: netdev: Use mutex instead of spinlocks
509412749002 leds: trigger: netdev: Convert device attr to macro
0fd93ac85826 leds: trigger: netdev: Rename add namespace to netdev trigger enum modes
eb31ca4531a0 leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from mode
3fc498cf54b4 leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename
I'm assuming the new series will get nerged via netdev, with your
Acked-by. Could you create a stable branch with these patches which
can be pulled into netdev?
* tag 'ib-leds-netdev-v6.5' of git://git.kernel.org/pub/scm/linux/kernel/git/lee/leds:
leds: trigger: netdev: Use mutex instead of spinlocks
leds: trigger: netdev: Convert device attr to macro
leds: trigger: netdev: Rename add namespace to netdev trigger enum modes
leds: trigger: netdev: Drop NETDEV_LED_MODE_LINKUP from mode
leds: trigger: netdev: Recheck NETDEV_LED_MODE_LINKUP on dev rename
====================
Link: https://lore.kernel.org/r/20230525111521.GA411262@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull networking fixes from Paolo Abeni:
"Including fixes from bluetooth and bpf.
Current release - regressions:
- net: fix skb leak in __skb_tstamp_tx()
- eth: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
Current release - new code bugs:
- handshake:
- fix sock->file allocation
- fix handshake_dup() ref counting
- bluetooth:
- fix potential double free caused by hci_conn_unlink
- fix UAF in hci_conn_hash_flush
Previous releases - regressions:
- core: fix stack overflow when LRO is disabled for virtual
interfaces
- tls: fix strparser rx issues
- bpf:
- fix many sockmap/TCP related issues
- fix a memory leak in the LRU and LRU_PERCPU hash maps
- init the offload table earlier
- eth: mlx5e:
- do as little as possible in napi poll when budget is 0
- fix using eswitch mapping in nic mode
- fix deadlock in tc route query code
Previous releases - always broken:
- udplite: fix NULL pointer dereference in __sk_mem_raise_allocated()
- raw: fix output xfrm lookup wrt protocol
- smc: reset connection when trying to use SMCRv2 fails
- phy: mscc: enable VSC8501/2 RGMII RX clock
- eth: octeontx2-pf: fix TSOv6 offload
- eth: cdc_ncm: deal with too low values of dwNtbOutMaxSize"
* tag 'net-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (79 commits)
udplite: Fix NULL pointer dereference in __sk_mem_raise_allocated().
net: phy: mscc: enable VSC8501/2 RGMII RX clock
net: phy: mscc: remove unnecessary phydev locking
net: phy: mscc: add support for VSC8501
net: phy: mscc: add VSC8502 to MODULE_DEVICE_TABLE
net/handshake: Enable the SNI extension to work properly
net/handshake: Unpin sock->file if a handshake is cancelled
net/handshake: handshake_genl_notify() shouldn't ignore @flags
net/handshake: Fix uninitialized local variable
net/handshake: Fix handshake_dup() ref counting
net/handshake: Remove unneeded check from handshake_dup()
ipv6: Fix out-of-bounds access in ipv6_find_tlv()
net: ethernet: mtk_eth_soc: fix QoS on DSA MAC on non MTK_NETSYS_V2 SoCs
docs: netdev: document the existence of the mail bot
net: fix skb leak in __skb_tstamp_tx()
r8169: Use a raw_spinlock_t for the register locks.
page_pool: fix inconsistency for page_pool_ring_[un]lock()
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
...
Pull power supply fixes from Sebastian Reichel:
- Fix power_supply_get_battery_info for devices without parent devices
resulting in NULL pointer dereference
- Fix desktop systems reporting to run on battery once a power-supply
device with device scope appears (e.g. a HID keyboard with a battery)
- Ratelimit debug print about driver not providing data
- Fix race condition related to external_power_changed in multiple
drivers (ab8500, axp288, bq25890, sc27xx, bq27xxx)
- Fix LED trigger switching from blinking to solid-on when charging
finishes
- Fix multiple races in bq27xxx battery driver
- mt6360: handle potential ENOMEM from devm_work_autocancel
- sbs-charger: Fix SBS_CHARGER_STATUS_CHARGE_INHIBITED bit
- rt9467: avoid passing 0 to dev_err_probe
* tag 'for-v6.4-rc' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (21 commits)
power: supply: Fix logic checking if system is running from battery
power: supply: mt6360: add a check of devm_work_autocancel in mt6360_charger_probe
power: supply: sbs-charger: Fix INHIBITED bit for Status reg
power: supply: rt9467: Fix passing zero to 'dev_err_probe'
power: supply: Ratelimit no data debug output
power: supply: Fix power_supply_get_battery_info() if parent is NULL
power: supply: bq24190: Call power_supply_changed() after updating input current
power: supply: bq25890: Call power_supply_changed() after updating input current or voltage
power: supply: bq27xxx: Use mod_delayed_work() instead of cancel() + schedule()
power: supply: bq27xxx: After charger plug in/out wait 0.5s for things to stabilize
power: supply: bq27xxx: Ensure power_supply_changed() is called on current sign changes
power: supply: bq27xxx: Move bq27xxx_battery_update() down
power: supply: bq27xxx: Add cache parameter to bq27xxx_battery_current_and_status()
power: supply: bq27xxx: Fix poll_interval handling and races on remove
power: supply: bq27xxx: Fix I2C IRQ race on remove
power: supply: bq27xxx: Fix bq27xxx_battery_update() race condition
power: supply: leds: Fix blink to LED on transition
power: supply: sc27xx: Fix external_power_changed race
power: supply: bq25890: Fix external_power_changed race
power: supply: axp288_fuel_gauge: Fix external_power_changed race
...
Pull sound fixes from Takashi Iwai:
"A collection of small fixes:
- HD-audio runtime PM bug fix
- A couple of HD-audio quirks
- Fix series of ASoC Intel AVS drivers
- ASoC DPCM fix for a bug found on new Intel systems
- A few other ASoC device-specific small fixes"
* tag 'sound-6.4-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable headset onLenovo M70/M90
ASoC: dwc: move DMA init to snd_soc_dai_driver probe()
ASoC: cs35l41: Fix default regmap values for some registers
ALSA: hda: Fix unhandled register update during auto-suspend period
ASoC: dt-bindings: tlv320aic32x4: Fix supply names
ASoC: Intel: avs: Add missing checks on FE startup
ASoC: Intel: avs: Fix avs_path_module::instance_id size
ASoC: Intel: avs: Account for UID of ACPI device
ASoC: Intel: avs: Fix declaration of enum avs_channel_config
ASoC: Intel: Skylake: Fix declaration of enum skl_ch_cfg
ASoC: Intel: avs: Access path components under lock
ASoC: Intel: avs: Fix module lookup
ALSA: hda/ca0132: add quirk for EVGA X299 DARK
ASoC: soc-pcm: test if a BE can be prepared
ASoC: rt5682: Disable jack detection interrupt during suspend
ASoC: lpass: Fix for KASAN use_after_free out of bounds
Pull x86 platform driver fixes from Hans de Goede:
"Nothing special to report just a few small fixes"
* tag 'platform-drivers-x86-v6.4-3' of git://git.kernel.org/pub/scm/linux/kernel/git/pdx86/platform-drivers-x86:
platform/x86/intel/ifs: Annotate work queue on stack so object debug does not complain
platform/x86: ISST: Remove 8 socket limit
platform/mellanox: mlxbf-pmc: fix sscanf() error checking
platform/x86/amd/pmf: Fix CnQF and auto-mode after resume
platform/x86: asus-wmi: Ignore WMI events with codes 0x7B, 0xC0
Pull m68k fix from Geert Uytterhoeven:
- Fix signal frame issue causing user-space crashes on 68020/68030
* tag 'm68k-for-v6.4-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k: Move signal frame following exception on 68020/030
Antoine Tenart says:
====================
net: tcp: make txhash use consistent for IPv4
Series is divided in two parts. First two commits make the txhash (used
for the skb hash in TCP) to be consistent for all IPv4/TCP packets (IPv6
doesn't have the same issue). Last commit improve a hash-related doc.
One example is when using OvS with dp_hash, which uses skb->hash, to
select a path. We'd like packets from the same flow to be consistent, as
well as the hash being stable over time when using net.core.txrehash=0.
Same applies for kernel ECMP which also can use skb->hash.
====================
Link: https://lore.kernel.org/r/20230523161453.196094-1-atenart@kernel.org
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
The net.core.txrehash documentation mentions this knob is for listening
sockets only, while sk_rethink_txhash can be called on SYN and RTO
retransmits on all TCP sockets.
Remove the listening socket part.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
When using IPv4/TCP, skb->hash comes from sk->sk_txhash except in
TIME_WAIT and SYN_RECV where it's not set in the reply skb from
ip_send_unicast_reply. Those packets will have a mismatched hash with
others from the same flow as their hashes will be 0. IPv6 does not have
the same issue as the hash is set from the socket txhash in those cases.
This commits sets the hash in the reply skb from ip_send_unicast_reply,
which makes the IPv4 code behaving like IPv6.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Commit c67b85558f ("ipv6: tcp: send consistent autoflowlabel in
TIME_WAIT state") made the socket txhash also available in TIME_WAIT
sockets but for IPv6 only. Make it available for IPv4 too as we'll use
it in later commits.
Signed-off-by: Antoine Tenart <atenart@kernel.org>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Some LEDs may require to sleep while doing some operation like setting
brightness and other cleanup.
For this reason, using a spinlock will cause a sleep under spinlock
warning.
It should be safe to convert this to a sleepable lock since:
- sysfs read/write can sleep
- netdev_trig_work is a work queue and can sleep
- netdev _trig_notify can sleep
The spinlock was used when brightness didn't support sleeping, but this
changed and now it supported with brightness_set_blocking().
Convert to mutex lock to permit sleeping using brightness_set_blocking().
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-6-ansuelsmth@gmail.com
Putting NETDEV_LED_MODE_LINKUP in the same list of the netdev trigger
modes is wrong as it's used to set the link state of the device and not
to set a blink mode as it's done by NETDEV_LED_LINK, NETDEV_LED_TX and
NETDEV_LED_RX. It's also wrong to put this state in the same bitmap of the
netdev trigger mode and should be external to it.
Drop NETDEV_LED_MODE_LINKUP from mode list and convert to a simple bool
that will be true or false based on the carrier link. No functional
change intended.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Lee Jones <lee@kernel.org>
Link: https://lore.kernel.org/r/20230419210743.3594-3-ansuelsmth@gmail.com
David Epping says:
====================
net: phy: mscc: support VSC8501
this updated series of patches adds support for the VSC8501 Ethernet
PHY and fixes support for the VSC8502 PHY in cases where no other
software (like U-Boot) has initialized the PHY after power up.
The first patch simply adds the VSC8502 to the MODULE_DEVICE_TABLE,
where I guess it was unintentionally missing. I have no hardware to
test my change.
The second patch adds the VSC8501 PHY with exactly the same driver
implementation as the existing VSC8502.
The (new) third patch removes phydev locking from
vsc85xx_rgmii_set_skews(), as discussed for v2 of the patch set.
The (now) fourth patch fixes the initialization for VSC8501 and VSC8502.
I have tested this patch with VSC8501 on hardware in RGMII mode only.
https://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8501-03_Datasheet_60001741A.PDFhttps://ww1.microchip.com/downloads/aemDocuments/documents/UNG/ProductDocuments/DataSheets/VSC8502-03_Datasheet_60001742B.pdf
Table 4-42 "RGMII CONTROL, ADDRESS 20E2 (0X14)" Bit 11 for each of
them.
By default the RX_CLK is disabled for these PHYs. In cases where no
other software, like U-Boot, enabled the clock, this results in no
received packets being handed to the MAC.
The patch enables this clock output.
According to Microchip support (case number 01268776) this applies
to all modes (RGMII, GMII, and MII).
Other PHYs sharing the same register map and code, like
VSC8530/31/40/41 have the clock enabled and the relevant bit 11 is
reserved and read-only for them. As per previous discussion the
patch still clears the bit on these PHYs, too, possibly more easily
supporting other future PHYs implementing this functionality.
For the VSC8572 family of PHYs, having a different register map,
no such changes are applied.
====================
Link: https://lore.kernel.org/r/20230523153108.18548-1-david.epping@missinglinkelectronics.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
By default the VSC8501 and VSC8502 RGMII/GMII/MII RX_CLK output is
disabled. To allow packet forwarding towards the MAC it needs to be
enabled.
For other PHYs supported by this driver the clock output is enabled
by default.
Fixes: d316986331 ("net: phy: mscc: add support for VSC8502")
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Holding the struct phy_device (phydev) lock is unnecessary when
accessing phydev->interface in the PHY driver .config_init method,
which is the only place that vsc85xx_rgmii_set_skews() is called from.
The phy_modify_paged() function implements required MDIO bus level
locking, which can not be achieved by a phydev lock.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The VSC8501 PHY can use the same driver implementation as the VSC8502.
Adding the PHY ID and copying the handler functions of VSC8502 is
sufficient to operate it.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The mscc driver implements support for VSC8502, so its ID should be in
the MODULE_DEVICE_TABLE for automatic loading.
Signed-off-by: David Epping <david.epping@missinglinkelectronics.com>
Fixes: d316986331 ("net: phy: mscc: add support for VSC8502")
Reviewed-by: Vladimir Oltean <olteanv@gmail.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Chuck Lever says:
====================
Bug fixes for net/handshake
Paolo observed that there is a possible leak of sock->file. I
haven't looked into that yet, but it seems to be separate from
the fixes in this series, so no need to hold these up.
====================
The submissions mentions net-next but it means netdev (perhaps
merge window left over when trees are converged). In any case,
it should have gone into net, but was instead applied to net-next
as commit deb2e484ba ("Merge branch 'net-handshake-fixes'").
These are fixes tho, and Chuck needs them to make progress with
the client so double-merging them into net... it is what it is :(
Link: https://lore.kernel.org/r/168381978252.84244.1933636428135211300.stgit@91.116.238.104.host.secureserver.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Enable the upper layer protocol to specify the SNI peername. This
avoids the need for tlshd to use a DNS lookup, which can return a
hostname that doesn't match the incoming certificate's SubjectName.
Fixes: 2fd5532044 ("net/handshake: Add a kernel API for requesting a TLSv1.3 handshake")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If user space never calls DONE, sock->file's reference count remains
elevated. Enable sock->file to be freed eventually in this case.
Reported-by: Jakub Kacinski <kuba@kernel.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
trace_handshake_cmd_done_err() simply records the pointer in @req,
so initializing it to NULL is sufficient and safe.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
If get_unused_fd_flags() fails, we ended up calling fput(sock->file)
twice.
Reported-by: Dan Carpenter <dan.carpenter@linaro.org>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
handshake_req_submit() now verifies that the socket has a file.
Fixes: 3b3009ea8a ("net/handshake: Create a NETLINK service for handling handshake requests")
Reviewed-by: Simon Horman <simon.horman@corigine.com>
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Daniel Borkmann says:
====================
pull-request: bpf 2023-05-24
We've added 19 non-merge commits during the last 10 day(s) which contain
a total of 20 files changed, 738 insertions(+), 448 deletions(-).
The main changes are:
1) Batch of BPF sockmap fixes found when running against NGINX TCP tests,
from John Fastabend.
2) Fix a memleak in the LRU{,_PERCPU} hash map when bucket locking fails,
from Anton Protopopov.
3) Init the BPF offload table earlier than just late_initcall,
from Jakub Kicinski.
4) Fix ctx access mask generation for 32-bit narrow loads of 64-bit fields,
from Will Deacon.
5) Remove a now unsupported __fallthrough in BPF samples,
from Andrii Nakryiko.
6) Fix a typo in pkg-config call for building sign-file,
from Jeremy Sowden.
* tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf:
bpf, sockmap: Test progs verifier error with latest clang
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer with drops
bpf, sockmap: Test FIONREAD returns correct bytes in rx buffer
bpf, sockmap: Test shutdown() correctly exits epoll and recv()=0
bpf, sockmap: Build helper to create connected socket pair
bpf, sockmap: Pull socket helpers out of listen test for general use
bpf, sockmap: Incorrectly handling copied_seq
bpf, sockmap: Wake up polling after data copy
bpf, sockmap: TCP data stall on recv before accept
bpf, sockmap: Handle fin correctly
bpf, sockmap: Improved check for empty queue
bpf, sockmap: Reschedule is now done through backlog
bpf, sockmap: Convert schedule_work into delayed_work
bpf, sockmap: Pass skb ownership through read_skb
bpf: fix a memory leak in the LRU and LRU_PERCPU hash maps
bpf: Fix mask generation for 32-bit narrow loads of 64-bit fields
samples/bpf: Drop unnecessary fallthrough
bpf: netdev: init the offload table earlier
selftests/bpf: Fix pkg-config call building sign-file
====================
Link: https://lore.kernel.org/r/20230524170839.13905-1-daniel@iogearbox.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull spi fixes from Mark Brown:
"A collection of fixes that came in since the merge window, plus an
update to MAINTAINERS.
The Cadence fixes are coming from the addition of device mode support,
they required a couple of incremental updates in order to get
something that works robustly for both device and controller modes"
* tag 'spi-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi:
spi: spi-cadence: Interleave write of TX and read of RX FIFO
spi: dw: Replace spi->chip_select references with function calls
spi: MAINTAINERS: drop Krzysztof Kozlowski from Samsung SPI
spi: spi-cadence: Only overlap FIFO transactions in slave mode
spi: spi-cadence: Avoid read of RX FIFO before its ready
spi: spi-geni-qcom: Select FIFO mode for chip select
Pull regulator fixes from Mark Brown:
"Some fixes that came in since the merge window, nothing terribly
exciting - a couple of driver specific fixes and a fix for the error
handling when setting up the debugfs for the devices"
* tag 'regulator-fix-v6.4-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
regulator: mt6359: add read check for PMIC MT6359
regulator: Fix error checking for debugfs_create_dir
regulator: pca9450: Fix BUCK2 enable_mask
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Fix error propagation for the non-block-device I/O paths
MMC host:
- sdhci-cadence: Fix an error path during probe
- sdhci-esdhc-imx: Fix support for the 'no-mmc-hs400' DT property"
* tag 'mmc-v6.4-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: sdhci-esdhc-imx: make "no-mmc-hs400" works
mmc: sdhci-cadence: Fix an error handling path in sdhci_cdns_probe()
mmc: block: ensure error propagation for non-blk
Russell King says:
====================
net: pcs: xpcs: cleanups for clause 73 support
This series cleans up xpcs code, moving much of the clause 73 code
out of the driver into places where others can make use of it.
Specifically, we add a helper to convert a clause 73 advertisement
to ethtool link modes to mdio.h, and a helper to resolve the clause
73 negotiation state to phylink, which includes the pause modes.
In doing this cleanup, several issues were identified with the
original xpcs implementation:
1) it masks the link partner advertisement with its own advertisement
so userspace can't see what the full link partner advertisement
was.
2) it was always setting pause modes irrespective of the advertisements
on either end of the link.
3) it was reading the STAT1 registers multiple times. Reading STAT1
has the side effect of unlatching the link-down status, so
multiple reads should be avoided.
This patch series addresses the first two first by addressing the
issues, and then by moving over to the new helpers. The third issue
is solved by restructuring the xpcs code.
====================
Link: https://lore.kernel.org/r/ZGyR/jDyYTYzRklg@shell.armlinux.org.uk
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Avoid reading the STAT1 registers more than once while getting the PCS
state, as this register contains latching-low bits that are lost after
the first read.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use phylink_resolve_c73() to resolve the clause 73 autonegotiation
result.
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
xpcs was indicating symmetric pause should be enabled regardless of
the advertisements by either party. Fix this to use
linkmode_resolve_pause() now that we're no longer obliterating the
link partner's advertisement by logically anding it with our own.
This is transitional, the function will be entirely replaced with
phylink_resolve_c73() in the following patch.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
lp_advertising is supposed to reflect the link partner's advertisement
unmodified by the local advertisement, but xpcs bitwise ands it with
the local advertisement prior to calculating the resolution of the
negotiation.
Fix this by moving the bitwise and to xpcs_resolve_lpa_c73() so it can
place the results in a temporary bitmap before passing that to
ixpcs_get_max_usxgmii_speed().
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Convert xpcs clause 73 reading to use the newly introduced
mii_c73_to_linkmode() helper to translate the link partner
advertisement to an ethtool bitmap.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Read the clause 73 link partner advertisement in a loop and then
translate to the ethtool modes.
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
