Pull networking updates from Paolo Abeni:
"Core:
- Implement the Device Memory TCP transmit path, allowing zero-copy
data transmission on top of TCP from e.g. GPU memory to the wire.
- Move all the IPv6 routing tables management outside the RTNL scope,
under its own lock and RCU. The route control path is now 3x times
faster.
- Convert queue related netlink ops to instance lock, reducing again
the scope of the RTNL lock. This improves the control plane
scalability.
- Refactor the software crc32c implementation, removing unneeded
abstraction layers and improving significantly the related
micro-benchmarks.
- Optimize the GRO engine for UDP-tunneled traffic, for a 10%
performance improvement in related stream tests.
- Cover more per-CPU storage with local nested BH locking; this is a
prep work to remove the current per-CPU lock in local_bh_disable()
on PREMPT_RT.
- Introduce and use nlmsg_payload helper, combining buffer bounds
verification with accessing payload carried by netlink messages.
Netfilter:
- Rewrite the procfs conntrack table implementation, improving
considerably the dump performance. A lot of user-space tools still
use this interface.
- Implement support for wildcard netdevice in netdev basechain and
flowtables.
- Integrate conntrack information into nft trace infrastructure.
- Export set count and backend name to userspace, for better
introspection.
BPF:
- BPF qdisc support: BPF-qdisc can be implemented with BPF struct_ops
programs and can be controlled in similar way to traditional qdiscs
using the "tc qdisc" command.
- Refactor the UDP socket iterator, addressing long standing issues
WRT duplicate hits or missed sockets.
Protocols:
- Improve TCP receive buffer auto-tuning and increase the default
upper bound for the receive buffer; overall this improves the
single flow maximum thoughput on 200Gbs link by over 60%.
- Add AFS GSSAPI security class to AF_RXRPC; it provides transport
security for connections to the AFS fileserver and VL server.
- Improve TCP multipath routing, so that the sources address always
matches the nexthop device.
- Introduce SO_PASSRIGHTS for AF_UNIX, to allow disabling SCM_RIGHTS,
and thus preventing DoS caused by passing around problematic FDs.
- Retire DCCP socket. DCCP only receives updates for bugs, and major
distros disable it by default. Its removal allows for better
organisation of TCP fields to reduce the number of cache lines hit
in the fast path.
- Extend TCP drop-reason support to cover PAWS checks.
Driver API:
- Reorganize PTP ioctl flag support to require an explicit opt-in for
the drivers, avoiding the problem of drivers not rejecting new
unsupported flags.
- Converted several device drivers to timestamping APIs.
- Introduce per-PHY ethtool dump helpers, improving the support for
dump operations targeting PHYs.
Tests and tooling:
- Add support for classic netlink in user space C codegen, so that
ynl-c can now read, create and modify links, routes addresses and
qdisc layer configuration.
- Add ynl sub-types for binary attributes, allowing ynl-c to output
known struct instead of raw binary data, clarifying the classic
netlink output.
- Extend MPTCP selftests to improve the code-coverage.
- Add tests for XDP tail adjustment in AF_XDP.
New hardware / drivers:
- OpenVPN virtual driver: offload OpenVPN data channels processing to
the kernel-space, increasing the data transfer throughput WRT the
user-space implementation.
- Renesas glue driver for the gigabit ethernet RZ/V2H(P) SoC.
- Broadcom asp-v3.0 ethernet driver.
- AMD Renoir ethernet device.
- ReakTek MT9888 2.5G ethernet PHY driver.
- Aeonsemi 10G C45 PHYs driver.
Drivers:
- Ethernet high-speed NICs:
- nVidia/Mellanox (mlx5):
- refactor the steering table handling to significantly
reduce the amount of memory used
- add support for complex matches in H/W flow steering
- improve flow streeing error handling
- convert to netdev instance locking
- Intel (100G, ice, igb, ixgbe, idpf):
- ice: add switchdev support for LLDP traffic over VF
- ixgbe: add firmware manipulation and regions devlink support
- igb: introduce support for frame transmission premption
- igb: adds persistent NAPI configuration
- idpf: introduce RDMA support
- idpf: add initial PTP support
- Meta (fbnic):
- extend hardware stats coverage
- add devlink dev flash support
- Broadcom (bnxt):
- add support for RX-side device memory TCP
- Wangxun (txgbe):
- implement support for udp tunnel offload
- complete PTP and SRIOV support for AML 25G/10G devices
- Ethernet NICs embedded and virtual:
- Google (gve):
- add device memory TCP TX support
- Amazon (ena):
- support persistent per-NAPI config
- Airoha:
- add H/W support for L2 traffic offload
- add per flow stats for flow offloading
- RealTek (rtl8211): add support for WoL magic packet
- Synopsys (stmmac):
- dwmac-socfpga 1000BaseX support
- add Loongson-2K3000 support
- introduce support for hardware-accelerated VLAN stripping
- Broadcom (bcmgenet):
- expose more H/W stats
- Freescale (enetc, dpaa2-eth):
- enetc: add MAC filter, VLAN filter RSS and loopback support
- dpaa2-eth: convert to H/W timestamping APIs
- vxlan: convert FDB table to rhashtable, for better scalabilty
- veth: apply qdisc backpressure on full ring to reduce TX drops
- Ethernet switches:
- Microchip (kzZ88x3): add ETS scheduler support
- Ethernet PHYs:
- RealTek (rtl8211):
- add support for WoL magic packet
- add support for PHY LEDs
- CAN:
- Adds RZ/G3E CANFD support to the rcar_canfd driver.
- Preparatory work for CAN-XL support.
- Add self-tests framework with support for CAN physical interfaces.
- WiFi:
- mac80211:
- scan improvements with multi-link operation (MLO)
- Qualcomm (ath12k):
- enable AHB support for IPQ5332
- add monitor interface support to QCN9274
- add multi-link operation support to WCN7850
- add 802.11d scan offload support to WCN7850
- monitor mode for WCN7850, better 6 GHz regulatory
- Qualcomm (ath11k):
- restore hibernation support
- MediaTek (mt76):
- WiFi-7 improvements
- implement support for mt7990
- Intel (iwlwifi):
- enhanced multi-link single-radio (EMLSR) support on 5 GHz links
- rework device configuration
- RealTek (rtw88):
- improve throughput for RTL8814AU
- RealTek (rtw89):
- add multi-link operation support
- STA/P2P concurrency improvements
- support different SAR configs by antenna
- Bluetooth:
- introduce HCI Driver protocol
- btintel_pcie: do not generate coredump for diagnostic events
- btusb: add HCI Drv commands for configuring altsetting
- btusb: add RTL8851BE device 0x0bda:0xb850
- btusb: add new VID/PID 13d3/3584 for MT7922
- btusb: add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: implement host-wakeup feature"
* tag 'net-next-6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net-next: (1611 commits)
selftests/bpf: Fix bpf selftest build warning
selftests: netfilter: Fix skip of wildcard interface test
net: phy: mscc: Stop clearing the the UDPv4 checksum for L2 frames
net: openvswitch: Fix the dead loop of MPLS parse
calipso: Don't call calipso functions for AF_INET sk.
selftests/tc-testing: Add a test for HFSC eltree double add with reentrant enqueue behaviour on netem
net_sched: hfsc: Address reentrant enqueue adding class to eltree twice
octeontx2-pf: QOS: Refactor TC_HTB_LEAF_DEL_LAST callback
octeontx2-pf: QOS: Perform cache sync on send queue teardown
net: mana: Add support for Multi Vports on Bare metal
net: devmem: ncdevmem: remove unused variable
net: devmem: ksft: upgrade rx test to send 1K data
net: devmem: ksft: add 5 tuple FS support
net: devmem: ksft: add exit_wait to make rx test pass
net: devmem: ksft: add ipv4 support
net: devmem: preserve sockc_err
page_pool: fix ugly page_pool formatting
net: devmem: move list_add to net_devmem_bind_dmabuf.
selftests: netfilter: nft_queue.sh: include file transfer duration in log message
net: phy: mscc: Fix memory leak when using one step timestamping
...
Pull drm updates from Dave Airlie:
"As part of building up nova-core/nova-drm pieces we've brought in some
rust abstractions through this tree, aux bus being the main one, with
devres changes also in the driver-core tree. Along with the drm core
abstractions and enough nova-core/nova-drm to use them. This is still
all stub work under construction, to build the nova driver upstream.
The other big NVIDIA related one is nouveau adds support for
Hopper/Blackwell GPUs, this required a new GSP firmware update to
570.144, and a bunch of rework in order to support multiple fw
interfaces.
There is also the introduction of an asahi uapi header file as a
precursor to getting the real driver in later, but to unblock
userspace mesa packages while the driver is trapped behind rust
enablement.
Otherwise it's the usual mixture of stuff all over, amdgpu, i915/xe,
and msm being the main ones, and some changes to vsprintf.
new drivers:
- bring in the asahi uapi header standalone
- nova-drm: stub driver
rust dependencies (for nova-core):
- auxiliary
- bus abstractions
- driver registration
- sample driver
- devres changes from driver-core
- revocable changes
core:
- add Apple fourcc modifiers
- add virtio capset definitions
- extend EXPORT_SYNC_FILE for timeline syncobjs
- convert to devm_platform_ioremap_resource
- refactor shmem helper page pinning
- DP powerup/down link helpers
- extended %p4cc in vsprintf.c to support fourcc prints
- change vsprintf %p4cn to %p4chR, remove %p4cn
- Add drm_file_err function
- IN_FORMATS_ASYNC property
- move sitronix from tiny to their own subdir
rust:
- add drm core infrastructure rust abstractions
(device/driver, ioctl, file, gem)
dma-buf:
- adjust sg handling to not cache map on attach
- allow setting dma-device for import
- Add a helper to sort and deduplicate dma_fence arrays
docs:
- updated drm scheduler docs
- fbdev todo update
- fb rendering
- actual brightness
ttm:
- fix delayed destroy resv object
bridge:
- add kunit tests
- convert tc358775 to atomic
- convert drivers to devm_drm_bridge_alloc
- convert rk3066_hdmi to bridge driver
scheduler:
- add kunit tests
panel:
- refcount panels to improve lifetime handling
- Powertip PH128800T004-ZZA01
- NLT NL13676BC25-03F, Tianma TM070JDHG34-00
- Himax HX8279/HX8279-D DDIC
- Visionox G2647FB105
- Sitronix ST7571
- ZOTAC rotation quirk
vkms:
- allow attaching more displays
i915:
- xe3lpd display updates
- vrr refactor
- intel_display struct conversions
- xe2hpd memory type identification
- add link rate/count to i915_display_info
- cleanup VGA plane handling
- refactor HDCP GSC
- fix SLPC wait boosting reference counting
- add 20ms delay to engine reset
- fix fence release on early probe errors
xe:
- SRIOV updates
- BMG PCI ID update
- support separate firmware for each GT
- SVM fix, prelim SVM multi-device work
- export fan speed
- temp disable d3cold on BMG
- backup VRAM in PM notifier instead of suspend/freeze
- update xe_ttm_access_memory to use GPU for non-visible access
- fix guc_info debugfs for VFs
- use copy_from_user instead of __copy_from_user
- append PCIe gen5 limitations to xe_firmware document
amdgpu:
- DSC cleanup
- DC Scaling updates
- Fused I2C-over-AUX updates
- DMUB updates
- Use drm_file_err in amdgpu
- Enforce isolation updates
- Use new dma_fence helpers
- USERQ fixes
- Documentation updates
- SR-IOV updates
- RAS updates
- PSP 12 cleanups
- GC 9.5 updates
- SMU 13.x updates
- VCN / JPEG SR-IOV updates
amdkfd:
- Update error messages for SDMA
- Userptr updates
- XNACK fixes
radeon:
- CIK doorbell cleanup
nouveau:
- add support for NVIDIA r570 GSP firmware
- enable Hopper/Blackwell support
nova-core:
- fix task list
- register definition infrastructure
- move firmware into own rust module
- register auxiliary device for nova-drm
nova-drm:
- initial driver skeleton
msm:
- GPU:
- ACD (adaptive clock distribution) for X1-85
- drop fictional address_space_size
- improve GMU HFI response time out robustness
- fix crash when throttling during boot
- DPU:
- use single CTL path for flushing on DPU 5.x+
- improve SSPP allocation code for better sharing
- Enabled SmartDMA on SM8150, SC8180X, SC8280XP, SM8550
- Added SAR2130P support
- Disabled DSC support on MSM8937, MSM8917, MSM8953, SDM660
- DP:
- switch to new audio helpers
- better LTTPR handling
- DSI:
- Added support for SA8775P
- Added SAR2130P support
- HDMI:
- Switched to use new helpers for ACR data
- Fixed old standing issue of HPD not working in some cases
amdxdna:
- add dma-buf support
- allow empty command submits
renesas:
- add dma-buf support
- add zpos, alpha, blend support
panthor:
- fail properly for NO_MMAP bos
- add SET_LABEL ioctl
- debugfs BO dumping support
imagination:
- update DT bindings
- support TI AM68 GPU
hibmc:
- improve interrupt handling and HPD support
virtio:
- add panic handler support
rockchip:
- add RK3588 support
- add DP AUX bus panel support
ivpu:
- add heartbeat based hangcheck
mediatek:
- prepares support for MT8195/99 HDMIv2/DDCv2
anx7625:
- improve HPD
tegra:
- speed up firmware loading
* tag 'drm-next-2025-05-28' of https://gitlab.freedesktop.org/drm/kernel: (1627 commits)
drm/nouveau/tegra: Fix error pointer vs NULL return in nvkm_device_tegra_resource_addr()
drm/xe: Default auto_link_downgrade status to false
drm/xe/guc: Make creation of SLPC debugfs files conditional
drm/i915/display: Add check for alloc_ordered_workqueue() and alloc_workqueue()
drm/i915/dp_mst: Work around Thunderbolt sink disconnect after SINK_COUNT_ESI read
drm/i915/ptl: Use everywhere the correct DDI port clock select mask
drm/nouveau/kms: add support for GB20x
drm/dp: add option to disable zero sized address only transactions.
drm/nouveau: add support for GB20x
drm/nouveau/gsp: add hal for fifo.chan.doorbell_handle
drm/nouveau: add support for GB10x
drm/nouveau/gf100-: track chan progress with non-WFI semaphore release
drm/nouveau/nv50-: separate CHANNEL_GPFIFO handling out from CHANNEL_DMA
drm/nouveau: add helper functions for allocating pinned/cpu-mapped bos
drm/nouveau: add support for GH100
drm/nouveau: improve handling of 64-bit BARs
drm/nouveau/gv100-: switch to volta semaphore methods
drm/nouveau/gsp: support deeper page tables in COPY_SERVER_RESERVED_PDES
drm/nouveau/gsp: init client VMMs with NV0080_CTRL_DMA_SET_PAGE_DIRECTORY
drm/nouveau/gsp: fetch level shift and PDE from BAR2 VMM
...
Pull media updates from Mauro Carvalho Chehab:
- v4l2-core fix: V4L2_BUF_TYPE_VIDEO_OVERLAY is capture, not output
- New driver: Amlogic C3 ISP
- New sensor drivers: ST VD55G1 and VD56G3, OmniVision OV02C10
- amlogic: c3-mipi-csi2: Handle 64-bits division
- a fix for 64-bits division at the amlogic c3-mipi-csi2 driver
- Changes at atomisp to support mainline mt9m114 driver and remove
deprecated GPIO APIs
- various cleanups, fixes and enhancements
* tag 'media/v6.16-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (314 commits)
media: rkvdec: h264: Support High 10 and 4:2:2 profiles
media: rkvdec: Add get_image_fmt ops
media: rkvdec: Initialize the m2m context before the controls
media: rkvdec: h264: Limit minimum profile to constrained baseline
media: mediatek: jpeg: support 34bits
media: verisilicon: Free post processor buffers on error
media: platform: mtk-mdp3: Remove unused mdp_get_plat_device
media: amlogic: c3-mipi-csi2: Handle 64-bits division
media: uvcvideo: Use dev_err_probe for devm_gpiod_get_optional
media: uvcvideo: Fix deferred probing error
media: uvcvideo: Rollback non processed entities on error
media: uvcvideo: Send control events for partial succeeds
media: uvcvideo: Return the number of processed controls
media: uvcvideo: Do not turn on the camera for some ioctls
media: uvcvideo: Make power management granular
media: uvcvideo: Increase/decrease the PM counter per IOCTL
media: uvcvideo: Create uvc_pm_(get|put) functions
media: uvcvideo: Keep streaming state in the file handle
Documentation: media: Add documentation file c3-isp.rst
Documentation: media: Add documentation file metafmt-c3-isp.rst
...
Pull thermal control updates from Rafael Wysocki:
"These add support for a new feature, Platform Temperature Control
(PTC), to the Intel int340x thermal driver, add support for the Airoha
EN7581 thermal sensor and the IPQ5018 platform, fix up the ACPI
thermal zones handling, fix other assorted issues and clean up code
Specifics:
- Add Platform Temperature Control (PTC) support to the Intel int340x
thermal driver (Srinivas Pandruvada)
- Make the Hisilicon thermal driver compile by default when ARCH_HISI
is set (Krzysztof Kozlowski)
- Clean up printk() format by using %pC instead of %pCn in the
bcm2835 thermal driver (Luca Ceresoli)
- Fix variable name coding style in the AmLogic thermal driver
(Enrique Isidoro Vazquez Ramos)
- Fix missing debugfs entry removal on failure by using the devm_
variant in the LVTS thermal driver (AngeloGioacchino Del Regno)
- Remove the unused lvts_debugfs_exit() function as the devm_ variant
introduced before takes care of removing the debugfs entry in the
LVTS driver (Arnd Bergmann)
- Add the Airoha EN7581 thermal sensor support along with its DT
bindings (Christian Marangi)
- Add ipq5018 compatible string DT binding, cleanup and add its
suppot to the QCom Tsens thermal driver (Sricharan Ramabadhran,
George Moussalem)
- Fix comments typos in the Airoha driver (Christian Marangi, Colin
Ian King)
- Address a sparse warning by making a local variable static in the
QCom thermal driver (George Moussalem)
- Fix the usage of the _SCP control method in the driver for ACPI
thermal zones (Armin Wolf)"
* tag 'thermal-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
thermal: qcom: ipq5018: make ops_ipq5018 struct static
thermal/drivers/airoha: Fix spelling mistake "calibrarion" -> "calibration"
ACPI: thermal: Execute _SCP before reading trip points
ACPI: OSI: Stop advertising support for "3.0 _SCP Extensions"
thermal/drivers/airoha: Fix spelling mistake
thermal/drivers/qcom/tsens: Add support for IPQ5018 tsens
thermal/drivers/qcom/tsens: Add support for tsens v1 without RPM
thermal/drivers/qcom/tsens: Update conditions to strictly evaluate for IP v2+
dt-bindings: thermal: qcom-tsens: Add ipq5018 compatible
thermal/drivers: Add support for Airoha EN7581 thermal sensor
dt-bindings: thermal: Add support for Airoha EN7581 thermal sensor
thermal/drivers/mediatek/lvts: Remove unused lvts_debugfs_exit
thermal/drivers/mediatek/lvts: Fix debugfs unregister on failure
thermal/drivers/amlogic: Rename Uptat to uptat to follow kernel coding style
vsprintf: remove redundant and unused %pCn format specifier
thermal/drivers/bcm2835: Use %pC instead of %pCn
thermal/drivers/hisi: Do not enable by default during compile testing
thermal: int340x: processor_thermal: Platform temperature control documentation
thermal: intel: int340x: Enable platform temperature control
thermal: intel: int340x: Add platform temperature control interface
Pull MMC updates from Ulf Hansson:
"MMC core:
- Scan the eMMC boot areas for partition table
- Clarify purpose of mmc_can* functions by renaming them to mmc_card_can*
- Clarify helpers for host capabilities by renaming them to mmc_host_can*
- Add support for graceful host removal for SD and eMMC
- Further avoid re-storing power to the eMMC before a shutdown
- Add quirk to disable DDR50 tuning and use it for some Swissbit SD-cards
MMC host:
- mtk-sd: Add support for Dimensity 1200 MT6893
- mtk-sd: Fix condition to enable single burst type
- mtk-sd: Optimize several code-paths by aggregating register-writes
- renesas_sdhi: Add support for the Renesas RZ/V2N variant
- sdhci-msm: Add support for the SM7150 variant
- sdhci-esdhc-imx: Re-factor the system PM logic
- sdhci-esdhc-imx: Lots of improvements around the tuning support
- sdhci-of-arasan: Add support for the Renesas RZ/N1D variant
- sdhci-of-dwcmhsc: Add Sophgo SG2044 support
- sdhci-of-esdhc: Add support for the LS1021a variant
- sdhci-of-k1: Add new driver to support for SpacemiT K1 controller
- sdhci-pic32: Convert microchip,sdhci-pic32 DT doc to json schema
- wmt-sdmmc: Convert DT doc to json schema"
* tag 'mmc-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc: (59 commits)
dt-bindings: mmc: sdhci-of-dwcmhsc: Allow use of a power-domain
mmc: sdhci-esdhc-imx: fix few build warnings
mmc: bcm2835: Use str_read_write() helper
mmc: host: sdhci-esdhc-imx: refactor the system PM logic
mmc: sdhci: export APIs for sdhci irq wakeup
mmc: sdhci-of-k1: add support for SpacemiT K1 SoC
dt-bindings: mmc: spacemit,sdhci: add support for K1 SoC
mmc: core: Scan the eMMC boot areas for partition table
dt-binding: mmc: microchip,sdhci-pic32: convert text based binding to json schema
mmc: rename mmc_boot_partition_access() to mmc_host_can_access_boot()
mmc: rename mmc_host_uhs() to mmc_host_can_uhs()
mmc: rename mmc_host_done_complete() to mmc_host_can_done_complete()
mmc: rename mmc_host_cmd23() to mmc_host_can_cmd23()
mmc: sdhci-esdhc-imx: fix defined but not used warnings
dt-bindings: mmc: vt8500-sdmmc: Convert to YAML
dt-bindings: mmc: sdhci-msm: Add the SM7150 compatible
dt-bindings: mmc: fsl,esdhc: add compatible string fsl,ls1021a-esdhc
mmc: cavium-thunderx: Use non-hybrid PCI devres API
dt-bindings: mmc: mtk-sd: Add support for Dimensity 1200 MT6893
dt-bindings: mmc: sdhci-of-dwcmhsc: Add Sophgo SG2044 support
...
Pull pmdomain updates from Ulf Hansson:
"pmdomain core:
- Add residency reflection for domain-idlestates to debugfs
- Add genpd helper to correct the usage/rejected counters
pmdomain providers:
- mediatek: Add support for Dimensity 1200 MT6893
- qcom: Add support for SM4450 power domains
- rockchip: Add support for RK3562 SoC
- sunxi: Add support for Allwinner H6/H616 PRCM PPU
- ti: Fix STANDBY handling of OMAP2+ PER power domain
cpuidle-psci:
- Correct the domain-idlestate statistics in debugfs"
* tag 'pmdomain-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm: (23 commits)
pmdomain: ti: Fix STANDBY handling of PER power domain
pmdomain: amlogic: Constify some structures
pmdomain: core: Use genpd->opp_table to simplify error/remove path
pmdomain: core: Simplify return statement in genpd_power_off()
pmdomain: core: Convert genpd_power_off() to void
pmdomain: core: Convert to device_awake_path()
pmdomain: mediatek: Add error messages for missing regmaps
pmdomain: arm: Do not enable by default during compile testing
pmdomain: qcom: rpmhpd: Add SM4450 power domains
dt-bindings: power: qcom,rpmpd: Add SM4450 compatible
pmdomain: sunxi: add H6 PRCM PPU driver
dt-bindings: power: Add Allwinner H6/H616 PRCM PPU
pmdomain: bcm: bcm2835-power: Use devm_clk_get_optional
pmdomain: rockchip: Add support for RK3562 SoC
dt-bindings: power: rockchip: Add support for RK3562 SoC
pmdomain: mediatek: Add support for Dimensity 1200 MT6893
pmdomain: mediatek: Bump maximum bus protect data array elements
dt-bindings: power: mediatek: Support Dimensity 1200 MT6893 MTCMOS
pmdomain: core: Reset genpd->states to avoid freeing invalid data
pmdomain: core: Add residency reflection for domain-idlestates to debugfs
...
Pull spi updates from Mark Brown:
"The bulk of the changes in this release are driver work, as well as
new device support we have some important work on performance over
several drivers, and big overhauls for maintainability on a couple
too. Highlights include:
- Big cleanups of the sh-msiof driver from Geert Uytterhoeven, and of
the NXP FSPI driver from Haibo Chen
- Performance improvements for the AXI SPI engine
- Support for writes to memory mapped flashes on Renesas devices
- Integrated DMA support for Tegra210 QSPI, used by the Tegra234
- DMA support for Amlogic SPI controllers
- Support for AMD HID2, Qualcomm IPQ5018, Renesas RZ/G3E, Rockchip
RK3528 and Samsung Exynos Autov920
An update to fix some issues with the Atmel QSPI driver runtime PM
pulled in a new API from the PM core, and the Renesas memory mapped
write changes pull in some code that's shared in drivers/memory"
* tag 'spi-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (90 commits)
spi: spi-qpic-snand: return early on error from qcom_spi_io_op()
spi: loopback-test: fix up const pointer issue in rx_ranges_cmp()
spi: gpio: fix const issue in spi_to_spi_gpio()
spi: spi-qpic-snand: remove superfluous parameters of qcom_spi_check_error()
dt-bindings: spi: samsung: add exynosautov920-spi compatible
spi: spi-qpic-snand: reuse qcom_spi_check_raw_flash_errors()
spi: dt-bindings: Add rk3528-spi compatible
spi: spi_amd: Update Kconfig dependencies
spi: spi_amd: Add HIDDMA basic write support
spi: spi_amd: Remove read{q,b} usage on DMA buffer
spi: sh-msiof: Move register definitions to <linux/spi/sh_msiof.h>
spi: sh-msiof: Document frame start sync pulse mode
spi: sh-msiof: Double maximum DMA transfer size using two groups
spi: sh-msiof: Simplify BRG's Division Ratio
spi: sh-msiof: Increase TX FIFO size for R-Car V4H/V4M
spi: sh-msiof: Correct RX FIFO size for R-Car Gen3
spi: sh-msiof: Correct RX FIFO size for R-Car Gen2
spi: sh-msiof: Add core support for dual-group transfers
spi: sh-msiof: Correct SIMDR2_GRPMASK
spi: sh-msiof: SIFCTR bitfield conversion
...
Pull regulator updates from Mark Brown:
"This is a very quiet release, there was no work on the core and a good
chunk of the updates were the result of conversions to use newer GPIO
APIs.
We did gain support for Analog ADP5055 and TI TPS65214 devices, and
there's a new restart handler for the PCA9450 which allows devices
using it to be properly power cycled on reboot, but otherwise it's
minor fixes and API updates"
* tag 'regulator-v6.16' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (24 commits)
regulator: qcom_spmi: Constify struct spmi_voltage_range
regulator: max8952: Correct Samsung "Electronics" spelling in copyright headers
regulator: dt-bindings: mt6357: Drop fixed compatible requirement
regulator: gpio: Use dev_err_probe
regulator: pca9450: Add restart handler
regulator: da9121: Fix Wvoid-pointer-to-enum-cast warning
regulator: tps65219: Add TI TPS65214 Regulator Support
regulator: tps65219: Add support for TPS65215 Regulator IRQs
regulator: tps65219: Add support for TPS65215 regulator resources
regulator: tps65219: Update struct names
regulator: pf9453: convert to use maple tree register cache
regulator: max20086: Change enable gpio to optional
regulator: max20086: Fix MAX200086 chip id
regulator: adp5055: Remove unneeded semicolon
regulator: adp5055: remove duplicate device table
regulator: adp5055: Add driver for adp5055
regulator: dt-bindings: adi,adp5055-regulator: Add adp5055 support
regulator: don't compare raw GPIO descriptor pointers
regulator: rpi-panel-attiny: use new GPIO line value setter callbacks
regulator: rpi-panel-attiny: use lock guards for the state mutex
...
Pull gpio updates from Bartosz Golaszewski:
"We have three new drivers, some refactoring in the GPIO core, lots of
various changes across many drivers, new configfs interface for the
virtual gpio-aggregator module and DT-bindings updates.
The treewide conversion of GPIO drivers to using the new value setter
callbacks is ongoing with another round of GPIO drivers updated. You
will also see these commits coming in from other subsystems as with
the relevant changes merged into mainline last cycle, I've started
converting GPIO providers located elsewhere than drivers/gpio/.
GPIO core:
- use more lock guards where applicable
- refactor GPIO ACPI code and shrink it in the process by 8%
- move GPIO ACPI quirks into a separate file
- remove unneeded #ifdef
- convert GPIO devres helpers to using devm_add_action() where
applicable which shrinks and simplifies the code
- refactor GPIO descriptor validation in GPIO consumer interfaces
- don't allow setting values on input lines in the GPIO core which
will take off the burden from GPIO drivers of checking this down
the line
- provide gpiod_is_equal() as a way of safely comparing two GPIO
descriptors (the only current user is in regulator core)
New drivers:
- add the GPIO module for the max77759 multifunction device
- add the GPIO driver for the VeriSilicon BLZP1600 GPIO controller
- add the GPIO driver for the Spacemit K1 SoC
Driver improvements:
- convert more drivers to using the new GPIO line value setter
callbacks
- convert more drivers to making the irq_chip immutable as is
recommended by the interrupt subsystem
- extend build testing coverage by enabling more modules to be built
with COMPILE_TEST=y
- extend the gpio-aggregator module with a configfs interface that
makes the setup easier for user-space than the existing
driver-level sysfs attributes and also adds more advanced
configuration features (such as referring to aggregated lines by
their original names or modifying their names as exposed by the
aggregated chip)
- add a missing mutex_destroy() in gpio-imx-scu
- add an OF polarity quirk for s5m8767
- allow building gpio-vf610 as a loadable module
- make gpio-mxc not hardcode its GPIO base number with GPIO SYSFS
interface disabled (another small step towards getting rid of the
global GPIO numberspace)
- add support for level-triggered interrupts to gpio-pca953x
- don't double-check the ngpios property in gpio-ds4520 as GPIO core
already does it
- don't double-check the number of GPIOs in gpio-imx-scu as GPIO core
already does it
- remove unused callbacks from gpio-max3191x
DT bindings:
- add device-tree bindings for max77759, spacemit,k1 and blzp1600
(new drivers added this cycle)
- document more properties for gpio-vf610 and gpio-tegra186
- document a new pca95xx variant
- fix style of examples in several GPIO DT-binding documents
Misc:
- TODO list updates"
* tag 'gpio-updates-for-v6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/brgl/linux: (123 commits)
gpio: timberdale: select GPIOLIB_IRQCHIP
gpio: lpc18xx: select GPIOLIB_IRQCHIP
gpio: grgpio: select GPIOLIB_IRQCHIP
gpio: bcm-kona: select GPIOLIB_IRQCHIP
dt-bindings: gpio: vf610: add ngpios and gpio-reserved-ranges
gpio: davinci: select GPIOLIB_IRQCHIP
gpiolib-acpi: Update file references in the Documentation and MAINTAINERS
gpiolib: acpi: Move quirks to a separate file
gpiolib: acpi: Add acpi_gpio_need_run_edge_events_on_boot() getter
gpiolib: acpi: Handle deferred list via new API
gpiolib: acpi: Make sure we fill struct acpi_gpio_info
gpiolib: acpi: Switch to use enum in acpi_gpio_in_ignore_list()
gpiolib: acpi: Use temporary variable for struct acpi_gpio_info
gpiolib: remove unneeded #ifdef
gpio: mpc8xxx: select GPIOLIB_IRQCHIP
gpio: pxa: select GPIOLIB_IRQCHIP
gpio: pxa: Make irq_chip immutable
gpio: timberdale: Make irq_chip immutable
gpio: xgene-sb: Make irq_chip immutable
gpio: davinci: Make irq_chip immutable
...
Pull sound updates from Takashi Iwai:
"We've received a lot of activities in this cycle, mostly about leaf
driver codes rather than the core part, but with a good mixture of
code cleanups and new driver additions. Below are some highlights:
ASoC:
- Support for automatically enumerating DAIs from standards
conforming SoundWire SDCA devices; not much used as of this
writing, rather for future implementations
- Conversion of quite a few drivers to newer GPIO APIs
- Continued cleanups and helper usages in allover places
- Support for a wider range of Intel AVS platforms
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32
Everest Semiconductor ES8375 and ES8389, Longsoon-1 AC'97
controllers, nVidia Tegra264, Richtek ALC203 and RT9123 and
Rockchip SAI controllers
HD-audio:
- Lots of cleanups of TAS2781 codec drivers
- A new HD-audio control bound via ACPI for Nvidia
- Support for Tegra264, Intel WCL, usual new codec quirks
USB-audio:
- Fix a race at removal of MIDI device
- Pioneer DJM-V10 support, Scarlett2 driver cleanups
Misc:
- Cleanups of deprecated PCI functions
- Removal of unused / dead function codes"
* tag 'sound-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (364 commits)
firmware: cs_dsp: Fix OOB memory read access in KUnit test
ASoC: codecs: add support for ES8375
ASoC: dt-bindings: Add Everest ES8375 audio CODEC
ALSA: hda: acpi: Make driver's match data const static
ALSA: hda: acpi: Use SYSTEM_SLEEP_PM_OPS()
ALSA: atmel: Replace deprecated strcpy() with strscpy()
ALSA: core: fix up bus match const issues.
ASoC: wm_adsp: Make cirrus_dir const
ASoC: tegra: Tegra264 support in isomgr_bw
ASoC: tegra: AHUB: Add Tegra264 support
ASoC: tegra: ADX: Add Tegra264 support
ASoC: tegra: AMX: Add Tegra264 support
ASoC: tegra: I2S: Add Tegra264 support
ASoC: tegra: Update PLL rate for Tegra264
ASoC: tegra: ASRC: Update ARAM address
ASoC: tegra: ADMAIF: Add Tegra264 support
ASoC: tegra: CIF: Add Tegra264 support
dt-bindings: ASoC: Document Tegra264 APE support
dt-bindings: ASoC: admaif: Add missing properties
ASoC: dt-bindings: audio-graph-card2: reference audio-graph routing property
...
Pull pwm updates from Uwe Kleine-König:
"This time around the pwm changes for the next release contain three
new drivers (loongson, mc33xs2410 and rzg2l-gpt) and the usual
collection of cleanups in both the core and drivers, support for new
variants in existing drivers, conversion of dt bindings to yaml and
documentation updates.
Thanks for contributions and reviews go to Alexey Charkov,
AngeloGioacchino Del Regno, Bartosz Golaszewski, Biju Das, Binbin
Zhou, Dan Carpenter, Dimitri Fedrau, Geert Uytterhoeven, George Stark,
Huacai Chen, Juxin Gao, Krzysztof Kozlowski, Kuninori Morimoto,
Laurent Pinchart, Neil Armstrong, Nuno Sá, Rob Herring, and Trevor
Gamblin"
* tag 'pwm/for-6.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/ukleinek/linux: (39 commits)
dt-bindings: timer: renesas,tpu: remove binding documentation
pwm: adp5585: make sure to include mod_devicetable.h
pwm: Tidyup PWM menu for Renesas
pwm: Restore alphabetic ordering in Kconfig and Makefile
pwm: Formally describe the procedure used to pick a hardware waveform setting
pwm: Let pwm_set_waveform_might_sleep() return 0 instead of 1 after rounding up
pwm: Let pwm_set_waveform_might_sleep() fail for exact but impossible requests
ARM: shmobile: defconfig: Enable more support for RZN1D-DB/EB
arm64: defconfig: Add Renesas MSIOF sound support
arm64: defconfig: Enable Renesas RZ/G2L GPT config
pwm: add support for NXPs high-side switch MC33XS2410
dt-bindings: pwm: add support for MC33XS2410
pwm: rzg2l-gpt: Accept requests for too high period length
dt-bindings: pwm: vt8500-pwm: Convert to YAML
dt-bindings: pwm: mediatek,pwm-disp: Add compatible for MT6893
pwm: Fix various formatting issues in kernel-doc
pwm: Add support for RZ/G2L GPT
dt-bindings: pwm: Add RZ/G2L GPT binding
pwm: Better document return value of pwm_round_waveform_might_sleep()
pwm: loongson: Fix an error code in probe()
...
Pull MSI updates from Thomas Gleixner:
"Updates for the MSI subsystem (core code and PCI):
- Switch the MSI descriptor locking to lock guards
- Replace a broken and naive implementation of PCI/MSI-X control word
updates in the PCI/TPH driver with a properly serialized variant in
the PCI/MSI core code.
- Remove the MSI descriptor abuse in the SCCI/UFS/QCOM driver by
replacing the direct access to the MSI descriptors with the proper
API function calls. People will never understand that APIs exist
for a reason...
- Provide core infrastructre for the upcoming PCI endpoint library
extensions. Currently limited to ARM GICv3+, but in theory
extensible to other architectures.
- Provide a MSI domain::teardown() callback, which allows drivers to
undo the effects of the prepare() callback.
- Move the MSI domain::prepare() callback invocation to domain
creation time to avoid redundant (and in case of ARM/GIC-V3-ITS
confusing) invocations on every allocation.
In combination with the new teardown callback this removes some
ugly hacks in the GIC-V3-ITS driver, which pretended to work around
the short comings of the core code so far. With this update the
code is correct by design and implementation.
- Make the irqchip MSI library globally available, provide a MSI
parent domain creation helper and convert a bunch of (PCI/)MSI
drivers over to the modern MSI parent mechanism. This is the first
step to get rid of at least one incarnation of the three PCI/MSI
management schemes.
- The usual small cleanups and improvements"
* tag 'irq-msi-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (33 commits)
PCI/MSI: Use bool for MSI enable state tracking
PCI: tegra: Convert to MSI parent infrastructure
PCI: xgene: Convert to MSI parent infrastructure
PCI: apple: Convert to MSI parent infrastructure
irqchip/msi-lib: Honour the MSI_FLAG_NO_AFFINITY flag
irqchip/mvebu: Convert to msi_create_parent_irq_domain() helper
irqchip/gic: Convert to msi_create_parent_irq_domain() helper
genirq/msi: Add helper for creating MSI-parent irq domains
irqchip: Make irq-msi-lib.h globally available
irqchip/gic-v3-its: Use allocation size from the prepare call
genirq/msi: Engage the .msi_teardown() callback on domain removal
genirq/msi: Move prepare() call to per-device allocation
irqchip/gic-v3-its: Implement .msi_teardown() callback
genirq/msi: Add .msi_teardown() callback as the reverse of .msi_prepare()
irqchip/gic-v3-its: Add support for device tree msi-map and msi-mask
dt-bindings: PCI: pci-ep: Add support for iommu-map and msi-map
irqchip/gic-v3-its: Set IRQ_DOMAIN_FLAG_MSI_IMMUTABLE for ITS
irqdomain: Add IRQ_DOMAIN_FLAG_MSI_IMMUTABLE and irq_domain_is_msi_immutable()
platform-msi: Add msi_remove_device_irq_domain() in platform_device_msi_free_irqs_all()
genirq/msi: Rename msi_[un]lock_descs()
...
Pull irq controller updates from Thomas Gleixner:
"Update for interrupt chip drivers:
- Convert the generic interrupt chip to lock guards to remove copy &
pasta boilerplate code and gotos.
- A new driver fot the interrupt controller in the EcoNet EN751221
MIPS SoC.
- Extend the SG2042-MSI driver to support the new SG2044 SoC
- Updates and cleanups for the (ancient) VT8500 driver
- Improve the scalability of the ARM GICV4.1 ITS driver by utilizing
node local copies a VM's interrupt translation table when possible.
This results in a 12% reduction of VM IPI latency in certain
workloads.
- The usual cleanups and improvements all over the place"
* tag 'irq-drivers-2025-05-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (25 commits)
irqchip/irq-pruss-intc: Simplify chained interrupt handler setup
irqchip/gic-v4.1: Use local 4_1 ITS to generate VSGI
irqchip/econet-en751221: Switch to of_fwnode_handle()
irqchip/irq-vt8500: Switch to irq_domain_create_*()
irqchip/econet-en751221: Switch to irq_domain_create_linear()
irqchip/irq-vt8500: Use fewer global variables and add error handling
irqchip/irq-vt8500: Use a dedicated chained handler function
irqchip/irq-vt8500: Don't require 8 interrupts from a chained controller
irqchip/irq-vt8500: Drop redundant copy of the device node pointer
irqchip/irq-vt8500: Split up ack/mask functions
irqchip/sg2042-msi: Fix wrong type cast in sg2044_msi_irq_ack()
irqchip/sg2042-msi: Add the Sophgo SG2044 MSI interrupt controller
irqchip/sg2042-msi: Introduce configurable chipinfo for SG2042
irqchip/sg2042-msi: Rename functions and data structures to be SG2042 agnostic
dt-bindings: interrupt-controller: Add Sophgo SG2044 MSI controller
genirq/generic-chip: Fix incorrect lock guard conversions
genirq/generic-chip: Remove unused lock wrappers
irqchip: Convert generic irqchip locking to guards
gpio: mvebu: Convert generic irqchip locking to guard()
ARM: orion/gpio:: Convert generic irqchip locking to guard()
...
Pull crypto updates from Herbert Xu:
"API:
- Fix memcpy_sglist to handle partially overlapping SG lists
- Use memcpy_sglist to replace null skcipher
- Rename CRYPTO_TESTS to CRYPTO_BENCHMARK
- Flip CRYPTO_MANAGER_DISABLE_TEST into CRYPTO_SELFTESTS
- Hide CRYPTO_MANAGER
- Add delayed freeing of driver crypto_alg structures
Compression:
- Allocate large buffers on first use instead of initialisation in scomp
- Drop destination linearisation buffer in scomp
- Move scomp stream allocation into acomp
- Add acomp scatter-gather walker
- Remove request chaining
- Add optional async request allocation
Hashing:
- Remove request chaining
- Add optional async request allocation
- Move partial block handling into API
- Add ahash support to hmac
- Fix shash documentation to disallow usage in hard IRQs
Algorithms:
- Remove unnecessary SIMD fallback code on x86 and arm/arm64
- Drop avx10_256 xts(aes)/ctr(aes) on x86
- Improve avx-512 optimisations for xts(aes)
- Move chacha arch implementations into lib/crypto
- Move poly1305 into lib/crypto and drop unused Crypto API algorithm
- Disable powerpc/poly1305 as it has no SIMD fallback
- Move sha256 arch implementations into lib/crypto
- Convert deflate to acomp
- Set block size correctly in cbcmac
Drivers:
- Do not use sg_dma_len before mapping in sun8i-ss
- Fix warm-reboot failure by making shutdown do more work in qat
- Add locking in zynqmp-sha
- Remove cavium/zip
- Add support for PCI device 0x17D8 to ccp
- Add qat_6xxx support in qat
- Add support for RK3576 in rockchip-rng
- Add support for i.MX8QM in caam
Others:
- Fix irq_fpu_usable/kernel_fpu_begin inconsistency during CPU bring-up
- Add new SEV/SNP platform shutdown API in ccp"
* tag 'v6.16-p1' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (382 commits)
x86/fpu: Fix irq_fpu_usable() to return false during CPU onlining
crypto: qat - add missing header inclusion
crypto: api - Redo lookup on EEXIST
Revert "crypto: testmgr - Add hash export format testing"
crypto: marvell/cesa - Do not chain submitted requests
crypto: powerpc/poly1305 - add depends on BROKEN for now
Revert "crypto: powerpc/poly1305 - Add SIMD fallback"
crypto: ccp - Add missing tee info reg for teev2
crypto: ccp - Add missing bootloader info reg for pspv5
crypto: sun8i-ce - move fallback ahash_request to the end of the struct
crypto: octeontx2 - Use dynamic allocated memory region for lmtst
crypto: octeontx2 - Initialize cptlfs device info once
crypto: xts - Only add ecb if it is not already there
crypto: lrw - Only add ecb if it is not already there
crypto: testmgr - Add hash export format testing
crypto: testmgr - Use ahash for generic tfm
crypto: hmac - Add ahash support
crypto: testmgr - Ignore EEXIST on shash allocation
crypto: algapi - Add driver template support to crypto_inst_setname
crypto: shash - Set reqsize in shash_alg
...
Marc Kleine-Budde says:
====================
pull-request: can-next 2025-05-22
this is a pull request of 22 patches for net-next/main.
The series by Biju Das contains 19 patches and adds RZ/G3E CANFD
support to the rcar_canfd driver.
The patch by Vincent Mailhol adds a struct data_bittiming_params to
group FD parameters as a preparation patch for CAN-XL support.
Felix Maurer's patch imports tst-filter from can-tests into the kernel
self tests and Vincent Mailhol adds support for physical CAN
interfaces.
linux-can-next-for-6.16-20250522
* tag 'linux-can-next-for-6.16-20250522' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can-next: (22 commits)
selftests: can: test_raw_filter.sh: add support of physical interfaces
selftests: can: Import tst-filter from can-tests
can: dev: add struct data_bittiming_params to group FD parameters
can: rcar_canfd: Add RZ/G3E support
can: rcar_canfd: Enhance multi_channel_irqs handling
can: rcar_canfd: Add external_clk variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add sh variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add struct rcanfd_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add shared_can_regs variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add ch_interface_mode variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add {nom,data}_bittiming variables to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_cftml variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add max_aflpn variable to struct rcar_canfd_hw_info
can: rcar_canfd: Add rnc_field_width variable to struct rcar_canfd_hw_info
can: rcar_canfd: Update RCANFD_GAFLCFG macro
can: rcar_canfd: Add rcar_canfd_setrnc()
can: rcar_canfd: Drop the mask operation in RCANFD_GAFLCFG_SETRNC macro
can: rcar_canfd: Update RCANFD_GERFL_ERR macro
can: rcar_canfd: Drop RCANFD_GAFLCFG_GETRNC macro
can: rcar_canfd: Use of_get_available_child_by_name()
...
====================
Link: https://patch.msgid.link/20250522084128.501049-1-mkl@pengutronix.de
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
ASoC: Additional v6.16 updates
A couple more updates on top of the last set I sent you, a new driver
for the ES8375 and a fix for the Cirrus KUnit tests from Jaroslav.
Luiz Augusto von Dentz says:
====================
bluetooth-next pull request for net-next:
core:
- Add support for SIOCETHTOOL ETHTOOL_GET_TS_INFO
- Separate CIS_LINK and BIS_LINK link types
- Introduce HCI Driver protocol
drivers:
- btintel_pcie: Do not generate coredump for diagnostic events
- btusb: Add HCI Drv commands for configuring altsetting
- btusb: Add RTL8851BE device 0x0bda:0xb850
- btusb: Add new VID/PID 13d3/3584 for MT7922
- btusb: Add new VID/PID 13d3/3630 and 13d3/3613 for MT7925
- btnxpuart: Implement host-wakeup feature
* tag 'for-net-next-2025-05-22' of git://git.kernel.org/pub/scm/linux/kernel/git/bluetooth/bluetooth-next: (23 commits)
Bluetooth: btintel: Check dsbr size from EFI variable
Bluetooth: MGMT: iterate over mesh commands in mgmt_mesh_foreach()
Bluetooth: btusb: Add new VID/PID 13d3/3584 for MT7922
Bluetooth: btusb: use skb_pull to avoid unsafe access in QCA dump handling
Bluetooth: L2CAP: Fix not checking l2cap_chan security level
Bluetooth: separate CIS_LINK and BIS_LINK link types
Bluetooth: btusb: Add new VID/PID 13d3/3630 for MT7925
Bluetooth: add support for SIOCETHTOOL ETHTOOL_GET_TS_INFO
Bluetooth: btintel_pcie: Dump debug registers on error
Bluetooth: ISO: Fix getpeername not returning sockaddr_iso_bc fields
Bluetooth: ISO: Fix not using SID from adv report
Revert "Bluetooth: btusb: add sysfs attribute to control USB alt setting"
Revert "Bluetooth: btusb: Configure altsetting for HCI_USER_CHANNEL"
Bluetooth: btusb: Add HCI Drv commands for configuring altsetting
Bluetooth: Introduce HCI Driver protocol
Bluetooth: btnxpuart: Implement host-wakeup feature
dt-bindings: net: bluetooth: nxp: Add support for host-wakeup
Bluetooth: btusb: Add RTL8851BE device 0x0bda:0xb850
Bluetooth: hci_uart: Remove unnecessary NULL check before release_firmware()
Bluetooth: btmtksdio: Fix wakeup source leaks on device unbind
...
====================
Link: https://patch.msgid.link/20250522171048.3307873-1-luiz.dentz@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
ASoC: Updates for v6.16
The changes in this release are quite large, mainly in drivers rather
than the core. This is partly due to cleanups that touch a lot of
drivers and partly due to several relatively large new drivers.
- Support for automatically enumerating DAIs from standards conforming
SoundWire SDCA devices, further work is required for these to be
useful in an actual card.
- Conversion of quite a few drivers to newer GPIO APIs.
- More helpers and cleanups from Mormimoto-san.
- Support for a wider range of AVS platforms.
- Support for AMD ACP 7.x platforms, Cirrus Logic CS35L63 and CS48L32,
Everest Semiconductor ES8389, Longsoon-1 AC'97 controllers, nVidia
Tegra264, Richtek ALC203 and RT9123 and Rockchip SAI controllers.
Merge series from "Sheetal ." <sheetal@nvidia.com>:
The patch series includes the necessary changes to enable
support for the Tegra264 platforms in AHUB drivers.
Add Tegra264 compatible strings to APE subsystem device bindings:
- audio-graph-card: Due to different PLL clock rate.
- admaif: Due to 32 channels supported and register offset changes.
- i2s: Due to 32 channels supported and register offset changes.
- amx/adx: Due to 32 channels supported and register offset changes.
- asrc: Due to different ARAM address.
- ahub: Due to AHUB IPs number of instances updates.
- for future proofing the T264 compatibility is added for other device
nodes.
These bindings enable the enhanced audio features of Tegra264
while maintaining compatibility with existing platforms.
Signed-off-by: Sheetal <sheetal@nvidia.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250512051747.1026770-3-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add optional interconnect and iommu properties to admaif yaml. These
properties are supported from Tegra186 SoC onwards.
This fixes below dtbs_check error for Tegra194 and Tegra234:
'interconnect-names', 'interconnects', 'iommus' do not match any of the regexes: 'pinctrl-[0-9]+'
Signed-off-by: Sheetal <sheetal@nvidia.com>
Acked-by: "Rob Herring (Arm)" <robh@kernel.org>
Link: https://patch.msgid.link/20250512051747.1026770-2-sheetal@nvidia.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Add Aeonsemi PHYs and the requirement of a firmware to correctly work.
Also document the max number of LEDs supported and what PHY ID expose
when no firmware is loaded.
Supported PHYs AS21011JB1, AS21011PB1, AS21010JB1, AS21010PB1,
AS21511JB1, AS21511PB1, AS21510JB1, AS21510PB1, AS21210JB1,
AS21210PB1 that all register with the PHY ID 0x7500 0x9410 on C45
registers before the firmware is loaded.
Reviewed-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Link: https://patch.msgid.link/20250517201353.5137-7-ansuelsmth@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Merge series from Mohammad Rafi Shaik <mohammad.rafi.shaik@oss.qualcomm.com>:
This patchset adds support for sound card on Qualcomm QCS9100 and
QCS9075 boards.
Introduce 'firmware-name' property to allow end-users and/or integrators
to decide which usecase-specific firmware to run on the WCN7850 platform.
This is necessary due to resource limitations such as memory capacity and
CPU capability, or performance and power optimization for different
application scenarios.
Two firmwares are supported: 'WCN7850/hw2.0' and 'WCN7850/hw2.0/ncm825'.
The former is the default firmware, suitable for most WiFi 7 STA
functions. The latter adds support for commercial-quality SAP and
optimizes power consumption for IoT applications.
Signed-off-by: Miaoqing Pan <quic_miaoqing@quicinc.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Link: https://patch.msgid.link/20250424005703.2479907-2-quic_miaoqing@quicinc.com
Signed-off-by: Jeff Johnson <jeff.johnson@oss.qualcomm.com>
Convert the Marvell CESA binding to DT schema format. The
marvell-cesa.txt and mv_cesa.txt are duplicate bindings.
The clock properties are quite varied for each platform hence the
if/then schemas. The old binding was fairly accurate with reality.
The original binding didn't mention there is 1 interrupt per CESA
engine. Based on users, there's a maximum of 2 engines.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the HiSilicon HIP06/7 Security Accelerator binding to DT schema
format. It's a straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
Convert the Broadcom SPUM/SPU2 binding to DT schema format. It's a
straight forward conversion.
Signed-off-by: Rob Herring (Arm) <robh@kernel.org>
Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
