Context Timestamp (CTX_TIMESTAMP) in the LRC accumulates the run ticks
of the context, but only gets updated when the context switches out. In
order to check how long a context has been active before it switches
out, two things are required:
(1) Determine if the context is running:
To do so, we program the WA BB to set an initial value for CTX_TIMESTAMP
in the LRC. The value chosen is 1 since 0 is the initial value when the
LRC is initialized. During a query, we just check for this value to
determine if the context is active. If the context switched out, it
would overwrite this location with the actual CTX_TIMESTAMP MMIO value.
Note that WA BB runs as the last part of the context restore, so reusing
this LRC location will not clobber anything.
(2) Calculate the time that the context has been active for:
The CTX_TIMESTAMP ticks only when the context is active. If a context is
active, we just use the CTX_TIMESTAMP MMIO as the new value of
utilization. While doing so, we need to read the CTX_TIMESTAMP MMIO
for the specific engine instance. Since we do not know which instance
the context is running on until it is scheduled, we also read the
ENGINE_ID MMIO in the WA BB and store it in the PPHSWP.
Using the above 2 instructions in a WA BB, capture active context
utilization.
v2: (Matt Brost)
- This breaks TDR, fix it by saving the CTX_TIMESTAMP register
"drm/xe: Save CTX_TIMESTAMP mmio value instead of LRC value"
- Drop tile from LRC if using gt
"drm/xe: Save the gt pointer in LRC and drop the tile"
v3:
- Remove helpers for bb_per_ctx_ptr (Matt)
- Add define for context active value (Matt)
- Use 64 bit CTX TIMESTAMP for platforms that support it. For platforms
that don't, live with the rare race. (Matt, Lucas)
- Convert engine id to hwe and get the MMIO value (Lucas)
- Correct commit message on when WA BB runs (Lucas)
v4:
- s/GRAPHICS_VER(...)/xe->info.has_64bit_timestamp/ (Matt)
- Drop support for active utilization on a VF (CI failure)
- In xe_lrc_init ensure the lrc value is 0 to begin with (CI regression)
v5:
- Minor checkpatch fix
- Squash into previous commit and make TDR use 32-bit time
- Update code comment to match commit msg
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4532
Suggested-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Umesh Nerlige Ramappa <umesh.nerlige.ramappa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Link: https://lore.kernel.org/r/20250509161159.2173069-8-umesh.nerlige.ramappa@intel.com
Mixing GPU and CPU atomics does not work unless a strict migration
policy of GPU atomics must be device memory. Enforce a policy of must be
in VRAM with a retry loop of 3 attempts, if retry loop fails abort
fault.
Removing always_migrate_to_vram modparam as we now have real migration
policy.
v2:
- Only retry migration on atomics
- Drop alway migrate modparam
v3:
- Only set vram_only on DGFX (Himal)
- Bail on get_pages failure if vram_only and retry count exceeded (Himal)
- s/vram_only/devmem_only
- Update xe_svm_range_is_valid to accept devmem_only argument
v4:
- Fix logic bug get_pages failure
v5:
- Fix commit message (Himal)
- Mention removing always_migrate_to_vram in commit message (Lucas)
- Fix xe_svm_range_is_valid to check for devmem pages
- Bail on devmem_only && !migrate_devmem (Thomas)
v6:
- Add READ_ONCE barriers for opportunistic checks (Thomas)
- Pair READ_ONCE with WRITE_ONCE (Thomas)
v7:
- Adjust comments (Thomas)
Fixes: 2f118c9491 ("drm/xe: Add SVM VRAM migration")
Cc: stable@vger.kernel.org
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Acked-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-3-matthew.brost@intel.com
This commit adds a new flag, devmem_only, to the drm_gpusvm structure. The
purpose of this flag is to ensure that the get_pages function allocates
memory exclusively from the device's memory. If the allocation from
device memory fails, the function will return an -EFAULT error.
Required for shared CPU and GPU atomics on certain devices.
v3:
- s/vram_only/devmem_only/
Fixes: 99624bdff8 ("drm/gpusvm: Add support for GPU Shared Virtual Memory")
Cc: stable@vger.kernel.org
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Himal Prasad Ghimiray <himal.prasad.ghimiray@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Link: https://lore.kernel.org/r/20250512135500.1405019-2-matthew.brost@intel.com
During post-migration recovery of a VF, it is necessary to update
GGTT references included in messages which are going to be sent
to GuC. GuC will start consuming messages after VF KMD will inform
it about fixups being done; before that, the VF KMD is expected
to update any H2G messages which are already in send buffer but
were not consumed by GuC.
Only a small subset of messages allowed for VFs have GGTT references
in them. This patch adds the functionality to parse the CTB send
ring buffer and shift addresses contained within.
While fixing the CTB content, ct->lock is not taken. This means
the only barrier taken remains GGTT address lock - which is ok,
because only requests with GGTT addresses matter, but it also means
tail changes can happen during the CTB fixups execution (which may
be ignored as any new messages will not have anything to fix).
The GGTT address locking will be introduced in a future series.
v2: removed storing shift as that's now done in VMA nodes patch;
macros to inlines; warns to asserts; log messages fixes (Michal)
v3: removed inline keywords, enums for offsets in CTB messages,
less error messages, if return unused then made functs void (Michal)
v4: update the cached head before starting fixups
v5: removed/updated comments, wrapped lines, converted assert into
error, enums for offsets to separate patch, reused xe_map_rd
v6: define xe_map_*_array() macros, support CTB wrap which divides
a message, updated comments, moved one function to an earlier patch
v7: renamed few functions, wider use on previously introduced helper,
separate cases in parsing messges, documented a static funct
v8: Introduced more helpers, fixed coding style mistakes
v9: Move xe_map*() functs to macros, add asserts, add debug print
v10: Errors in place of some asserts, style fixes
v11: Fixed invalid conditionals, added debug-only local pointer
v12: Removed redundant __maybe_unused
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-5-tomasz.lis@intel.com
Some GuC messages are constructed with incrementing dword counter
rather than referencing specific DWORDs, as described in GuC interface
specification.
This change introduces the definitions of DWORD numbers for parameters
which will need to be referenced in a CTB parser to be added in a
following patch. To ensure correctness of these DWORDs, verification
in form of asserts was added to the message construction code.
v2: Renamed enum members, added ones for single context registration,
modified asserts to check values rather than indexes.
v3: Reordered assert args to take less lines
v4: Added lengths
v5: Renamed MULTI_LRC_MSG_LEN to MULTI_LRC_MSG_MIN_LEN
Suggested-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-4-tomasz.lis@intel.com
We have only one GGTT for all IOV functions, with each VF having assigned
a range of addresses for its use. After migration, a VF can receive a
different range of addresses than it had initially.
This implements shifting GGTT addresses within drm_mm nodes, so that
VMAs stay valid after migration. This will make the driver use new
addresses when accessing GGTT from the moment the shifting ends.
By taking the ggtt->lock for the period of VMA fixups, this change
also adds constraint on that mutex. Any locks used during the recovery
cannot ever wait for hardware response - because after migration,
the hardware will not do anything until fixups are finished.
v2: Moved some functs to xe_ggtt.c; moved shift computation to just
after querying; improved documentation; switched some warns to asserts;
skipping fixups when GGTT shift eq 0; iterating through tiles (Michal)
v3: Updated kerneldocs, removed unused funct, properly allocate
balloning nodes if non existent
v4: Re-used ballooning functions from VF init, used bool in place of
standard error codes
v5: Renamed one function
v6: Subject tag change, several kerneldocs updated, some functions
renamed, some moved, added several asserts, shuffled declarations
of variables, revealed more detail in high level functions
v7: Fixed typos, added `_locked` suffix to some functs, improved
readability of asserts, removed unneeded conditional
v8: Moved one function, removed implementation detail from kerneldoc,
added asserts
v9: Code shuffling without much change, and one param rename
v10: Minor error path change, added printing the shift via debugfs
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-3-tomasz.lis@intel.com
The balloon nodes, which are used to fill areas of GGTT inaccessible
for a specific VF, were allocated and inserted into GGTT within one
function. To be able to re-use that insertion code during VF
migration recovery, we need to split it.
This patch separates allocation (init/fini functs) from the insertion
of balloons (balloon/deballoon functs). Locks are also moved to ensure
calls from post-migration recovery worker will not cause a deadlock.
v2: Moved declarations to proper header
v3: Rephrased description, introduced "_locked" versions of some
functs, more lockdep checks, some functions renamed, altered error
handling, added missing kerneldocs.
v4: Suffixed more functs with `_locked`, moved lockdep asserts,
fixed finalization in error path, added asserts
v5: Renamed another few functs, used xe_ggtt_node_allocated(),
moved lockdep back again to avoid null dereference, added
asserts, improved comments
v6: Changed params of cleanup_ggtt()
Signed-off-by: Tomasz Lis <tomasz.lis@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://lore.kernel.org/r/20250512114018.361843-2-tomasz.lis@intel.com
The xe buffer object shrinker name is visible in the
<debugfs>/shrinker directory and most if not all other shinkers
follow a naming convention that looks like
<subsystem>-<driver>_<objects>:<unique>
Follow the same convention for xe, changing the name to
drm-xe_gem:<unique>.
Other shrinkers typically use the device node for <unique> but
since drm drivers typically don't have a single unique device-
node, instead use the unique name in the drm device.
Fixes: 00c8efc318 ("drm/xe: Add a shrinker for xe bos")
Cc: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Francois Dugast <francois.dugast@intel.com>
Link: https://lore.kernel.org/r/20250508112931.3347-1-thomas.hellstrom@linux.intel.com
The workqueue used for the reset worker is marked as WQ_MEM_RECLAIM,
while the GSC one isn't (and can't be as we need to do memory
allocations in the gsc worker). Therefore, we can't flush the latter
from the former.
The reason why we had such a flush was to avoid interrupting either
the GSC FW load or in progress GSC proxy operations. GSC proxy
operations fall into 2 categories:
1) GSC proxy init: this only happens once immediately after GSC FW load
and does not support being interrupted. The only way to recover from
an interruption of the proxy init is to do an FLR and re-load the GSC.
2) GSC proxy request: this can happen in response to a request that
the driver sends to the GSC. If this is interrupted, the GSC FW will
timeout and the driver request will be failed, but overall the GSC
will keep working fine.
Flushing the work allowed us to avoid interruption in both cases (unless
the hang came from the GSC engine itself, in which case we're toast
anyway). However, a failure on a proxy request is tolerable if we're in
a scenario where we're triggering a GT reset (i.e., something is already
gone pretty wrong), so what we really need to avoid is interrupting
the init flow, which we can do by polling on the register that reports
when the proxy init is complete (as that ensure us that all the load and
init operations have been completed).
Note that during suspend we still want to do a flush of the worker to
make sure it completes any operations involving the HW before the power
is cut.
v2: fix spelling in commit msg, rename waiter function (Julia)
Fixes: dd0e89e5ed ("drm/xe/gsc: GSC FW load")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4830
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: John Harrison <John.C.Harrison@Intel.com>
Cc: Alan Previn <alan.previn.teres.alexis@intel.com>
Cc: <stable@vger.kernel.org> # v6.8+
Reviewed-by: Julia Filipchuk <julia.filipchuk@intel.com>
Link: https://lore.kernel.org/r/20250502155104.2201469-1-daniele.ceraolospurio@intel.com
The device core dumps are copied in 1.5GB chunks, which leads to a
link-time error on 32-bit builds because of the 64-bit division not
getting trivially turned into mask and shift operations:
ERROR: modpost: "__moddi3" [drivers/gpu/drm/xe/xe.ko] undefined!
On top of this, I noticed that the ALIGN_DOWN() usage here cannot
work because that is only defined for power-of-two alignments.
Change ALIGN_DOWN into an explicit div_u64_rem() that avoids the
link error and hopefully produces the right results.
Doing a 1.5GB kvmalloc() does seem a bit suspicious as well, e.g.
this will clearly fail on any 32-bit platform and is also likely
to run out of memory on 64-bit systems under memory pressure, so
using a much smaller power-of-two chunk size might be a good idea
instead.
v2:
- Always call div_u64_rem (Matt)
Reported-by: kernel test robot <lkp@intel.com>
Closes: https://lore.kernel.org/oe-kbuild-all/202504251238.JsNgFeFc-lkp@intel.com/
Fixes: c4a2e5f865 ("drm/xe: Add devcoredump chunking")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250501012545.1045247-1-matthew.brost@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Use a separate lock in the polling function eu_stall_data_buf_poll()
instead of eu_stall->stream_lock. This would prevent a possible
circular locking dependency leading to a deadlock as described below.
This would also require additional locking with the new lock in
the read function.
<4> [787.192986] ======================================================
<4> [787.192988] WARNING: possible circular locking dependency detected
<4> [787.192991] 6.14.0-rc7-xe+ #1 Tainted: G U
<4> [787.192993] ------------------------------------------------------
<4> [787.192994] xe_eu_stall/20093 is trying to acquire lock:
<4> [787.192996] ffff88819847e2c0 ((work_completion)
(&(&stream->buf_poll_work)->work)), at: __flush_work+0x1f8/0x5e0
<4> [787.193005] but task is already holding lock:
<4> [787.193007] ffff88814ce83ba8 (>->eu_stall->stream_lock){3:3},
at: xe_eu_stall_stream_ioctl+0x41/0x6a0 [xe]
<4> [787.193090] which lock already depends on the new lock.
<4> [787.193093] the existing dependency chain (in reverse order) is:
<4> [787.193095]
-> #1 (>->eu_stall->stream_lock){+.+.}-{3:3}:
<4> [787.193099] __mutex_lock+0xb4/0xe40
<4> [787.193104] mutex_lock_nested+0x1b/0x30
<4> [787.193106] eu_stall_data_buf_poll_work_fn+0x44/0x1d0 [xe]
<4> [787.193155] process_one_work+0x21c/0x740
<4> [787.193159] worker_thread+0x1db/0x3c0
<4> [787.193161] kthread+0x10d/0x270
<4> [787.193164] ret_from_fork+0x44/0x70
<4> [787.193168] ret_from_fork_asm+0x1a/0x30
<4> [787.193172]
-> #0 ((work_completion)(&(&stream->buf_poll_work)->work)){+.+.}-{0:0}:
<4> [787.193176] __lock_acquire+0x1637/0x2810
<4> [787.193180] lock_acquire+0xc9/0x300
<4> [787.193183] __flush_work+0x219/0x5e0
<4> [787.193186] cancel_delayed_work_sync+0x87/0x90
<4> [787.193189] xe_eu_stall_disable_locked+0x9a/0x260 [xe]
<4> [787.193237] xe_eu_stall_stream_ioctl+0x5b/0x6a0 [xe]
<4> [787.193285] __x64_sys_ioctl+0xa4/0xe0
<4> [787.193289] x64_sys_call+0x131e/0x2650
<4> [787.193292] do_syscall_64+0x91/0x180
<4> [787.193295] entry_SYSCALL_64_after_hwframe+0x76/0x7e
<4> [787.193299]
other info that might help us debug this:
<4> [787.193302] Possible unsafe locking scenario:
<4> [787.193304] CPU0 CPU1
<4> [787.193305] ---- ----
<4> [787.193306] lock(>->eu_stall->stream_lock);
<4> [787.193308] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193311] lock(>->eu_stall->stream_lock);
<4> [787.193313] lock((work_completion)
(&(&stream->buf_poll_work)->work));
<4> [787.193315]
*** DEADLOCK ***
Fixes: 760edec939 ("drm/xe/eustall: Add support to read() and poll() EU stall data")
Closes: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/4598
Signed-off-by: Harish Chegondi <harish.chegondi@intel.com>
Reviewed-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Signed-off-by: Ashutosh Dixit <ashutosh.dixit@intel.com>
Link: https://lore.kernel.org/r/c896932fca84f79db2df5942911997ed77b2b9b6.1744934656.git.harish.chegondi@intel.com
Core Changes:
Fix drm_gpusvm kernel-doc (Lucas)
Driver Changes:
- Release guc ids before cancelling work (Tejas)
- Remove a duplicated pc_start_call (Rodrigo)
- Fix an incorrect assert in previous userptr fixes (Thomas)
- Remove gen11 assertions and prefixes (Lucas)
- Drop sentinels from arg to xe_rtp_process_to_src (Lucas)
- Temporarily disable D3Cold on BMG (Rodrigo)
- Fix MOCS debugfs LNCF readout (Tvrtko)
- Some ring flush cleanups (Tvrtko)
- Use unsigned int for alignment in fb pinning code (Tvrtko)
- Retry and wait longer for GuC PC start (Rodrigo)
- Recognize 3DSTATE_COARSE_PIXEL in LRC dumps (Matt Roper)
- Remove reduntant check in xe_vm_create_ioctl() (Xin)
- A bunch of SRIOV updates (Michal)
- Add stats for SVM page-faults (Francois)
- Fix an UAF (Harish)
- Expose fan speed (Raag)
- Fix exporting xe buffer objects multiple times (Tomasz)
- Apply a workaround (Vinay)
- Simplify pinned bo iteration (Thomas)
- Remove an incorrect "static" keywork (Lucas)
- Add support for separate firmware files on each GT (Lucas)
- Survivability handling fixes (Lucas)
- Allow to inject error in early probe (Lucas)
- Fix unmet direct dependencies warning (Yue Haibing)
- More error injection during probe (Francois)
- Coding style fix (Maarten)
- Additional stats support (Riana)
- Add fault injection for xe_oa_alloc_regs (Nakshrtra)
- Add a BMG PCI ID (Matt Roper)
- Some SVM fixes and preliminary SVM multi-device work (Thomas)
- Switch the migrate code from drm managed to dev managed (Aradhya)
- Fix an out-of-bounds shift when invalidating TLB (Thomas)
- Ensure fixed_slice_mode gets set after ccs_mode change (Niranjana)
- Use local fence in error path of xe_migrate_clear (Matthew Brost)
- More Workarounds (Julia)
- Define sysfs_ops on all directories (Tejas)
- Set power state to D3Cold during s2idle/s3 (Badal)
- Devcoredump output fix (John)
- Avoid plain 64-bit division (Arnd Bergmann)
- Reword a debug message (John)
- Don't print a hwconfig error message when forcing execlists (Stuart)
- Restore an error code to avoid a smatch warning (Rodrigo)
- Invalidate L3 read-only cachelines for geometry streams too (Kenneth)
- Make PPHWSP size explicit in xe_gt_lrc_size() (Gustavo)
- Add GT frequency events (Vinay)
- Fix xe_pt_stage_bind_walk kerneldoc (Thomas)
- Add a workaround (Aradhya)
- Rework pinned save/restore (Matthew Auld, Matthew Brost)
- Allow non-contig VRAM kernel BO (Matthew Auld)
- Support non-contig VRAM provisioning for SRIOV (Matthew Auld)
- Allow scratch-pages for unmapped parts of page-faulting VMs. (Oak)
- Ensure XE_BO_FLAG_CPU_ADDR_MIRROR had a unique value (Matt Roper)
- Fix taking an invalid lock on wedge (Lucas)
- Configs and documentation for survivability mode (Riana)
- Remove an unused macro (Shuicheng)
- Work around a page-fault full error (Matt Brost)
- Enable a SRIOV workaround (John)
- Bump the recommended GuC version (John)
- Allow to drop VRAM resizing (Lucas)
- Don't expose privileged debugfs files if VF (Michal)
- Don't show GGTT/LMEM debugfs files under media GT (Michal)
- Adjust ring-buffer emission for maximum possible size (Tvrtko)
- Fix notifier vs folio lock deadlock (Matthew Auld)
- Stop relying on placement for dma-buf unmap Matthew Auld)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Hellstrom <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/aADWaEFKVmxSnDLo@fedora
Add migrate layer functions to access VRAM and update
xe_ttm_access_memory to use for non-visible access and large (more than
16k) BO access. 8G devcoreump on BMG observed 3 minute CPU copy time vs.
3s GPU copy time.
v4:
- Fix non-page aligned accesses
- Add support for small / unaligned access
- Update commit message indicating migrate used for large accesses (Auld)
- Fix warning in xe_res_cursor for non-zero offset
v5:
- Fix 32 bit build (CI)
v6:
- Rebase and use SVM migration copy functions
v7:
- Fix build error (CI)
v8:
- Remove ifdef around VRAM copy functions (CI)
- Use break statement in dma unmmaping (Jonathan)
- Use if/else rather than goto (Jonathan)
- Use single return point (Jonathan)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250423171725.597955-3-matthew.brost@intel.com
Chunk devcoredump into 1.5G pieces to avoid hitting the kvmalloc limit
of 2G. Simple algorithm reads 1.5G at time in xe_devcoredump_read
callback as needed.
Some memory allocations are changed to GFP_ATOMIC as they done in
xe_devcoredump_read which holds lock in the path of reclaim. The
allocations are small, so in practice should never fail.
v2:
- Update commit message wrt gfp atomic (John H)
v6:
- Drop GFP_ATOMIC change for hwconfig (John H)
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Reviewed-by: Jonathan Cavitt <jonathan.cavitt@intel.com>
Link: https://lore.kernel.org/r/20250423171725.597955-2-matthew.brost@intel.com
This flag used to be used in the old memory tracking code, that
code got migrated into the vmwgfx driver[1], and then got removed
from the tree[2], but this piece got left behind.
[1] f07069da6b ("drm/ttm: move memory accounting into vmwgfx v4")
[2] 8aadeb8ad8 ("drm/vmwgfx: Remove the dedicated memory accounting")
Cleanup the dead code.
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
When an attribute group is created with sysfs_create_group() or
sysfs_create_files() the ->sysfs_ops() callback is set to
kobj_sysfs_ops, which sets the ->show() callback to kobj_attr_show().
kobj_attr_show() uses container_of() to get the ->show() callback
from the attribute it was passed, meaning the ->show() callback needs
to be the same type as the ->show() callback in 'struct kobj_attribute'.
However, cur_freq_show() has the type of the ->show() callback in
'struct device_attribute', which causes a CFI violation when opening the
'id' sysfs node under gtidle/freq/throttle. This happens to work because
the layout of 'struct kobj_attribute' and 'struct device_attribute' are
the same, so the container_of() cast happens to allow the ->show()
callback to still work.
Changed the type of cur_freq_show() and few more functions to match the
->show() callback in 'struct kobj_attributes' to resolve the CFI
violation.
CFI failure seen while accessing sysfs files under
/sys/class/drm/card0/device/tile0/gt*/gtidle/*
/sys/class/drm/card0/device/tile0/gt*/freq0/*
/sys/class/drm/card0/device/tile0/gt*/freq0/throttle/*
[ 2599.618075] RIP: 0010:__cfi_cur_freq_show+0xd/0x10 [xe]
[ 2599.624452] Code: 44 c1 44 89 fa e8 03 95 39 f2 48 98 5b 41 5e 41 5f 5d c3 c9
[ 2599.646638] RSP: 0018:ffffbe438ead7d10 EFLAGS: 00010286
[ 2599.652823] RAX: ffff9f7d8b3845d8 RBX: ffff9f7dee8c95d8 RCX: 0000000000000000
[ 2599.661246] RDX: ffff9f7e6f439000 RSI: ffffffffc13ada30 RDI: ffff9f7d975d4b00
[ 2599.669669] RBP: ffffbe438ead7d18 R08: 0000000000001000 R09: ffff9f7e6f439000
[ 2599.678092] R10: 00000000e07304a6 R11: ffffffffc1241ca0 R12: ffffffffb4836ea0
[ 2599.688435] R13: ffff9f7e45fb1180 R14: ffff9f7d975d4b00 R15: ffff9f7e6f439000
[ 2599.696860] FS: 000076b02b66cfc0(0000) GS:ffff9f80ef400000(0000) knlGS:00000
[ 2599.706412] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[ 2599.713196] CR2: 00005f80d94641a9 CR3: 00000001e44ec006 CR4: 0000000100f72ef0
[ 2599.721618] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
[ 2599.730041] DR3: 0000000000000000 DR6: 00000000ffff07f0 DR7: 0000000000000400
[ 2599.738464] PKRU: 55555554
[ 2599.741655] Call Trace:
[ 2599.744541] <TASK>
[ 2599.747017] ? __die_body+0x69/0xb0
[ 2599.751151] ? die+0xa9/0xd0
[ 2599.754548] ? do_trap+0x89/0x160
[ 2599.758476] ? __cfi_cur_freq_show+0xd/0x10 [xe b37985c94829727668bd7c5b33c1]
[ 2599.768315] ? handle_invalid_op+0x69/0x90
[ 2599.773167] ? __cfi_cur_freq_show+0xd/0x10 [xe b37985c94829727668bd7c5b33c1]
[ 2599.783010] ? exc_invalid_op+0x36/0x60
[ 2599.787552] ? fred_hwexc+0x123/0x1a0
[ 2599.791873] ? fred_entry_from_kernel+0x7b/0xd0
[ 2599.797219] ? asm_fred_entrypoint_kernel+0x45/0x70
[ 2599.802976] ? act_freq_show+0x70/0x70 [xe b37985c94829727668bd7c5b33c1d9998]
[ 2599.812301] ? __cfi_cur_freq_show+0xd/0x10 [xe b37985c94829727668bd7c5b33c1]
[ 2599.822137] ? __kmalloc_node_noprof+0x1f3/0x420
[ 2599.827594] ? __kvmalloc_node_noprof+0xcb/0x180
[ 2599.833045] ? kobj_attr_show+0x22/0x40
[ 2599.837571] sysfs_kf_seq_show+0xa8/0x110
[ 2599.842302] kernfs_seq_show+0x38/0x50
Signed-off-by: Jeevaka Prabu Badrappan <jeevaka.badrappan@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://lore.kernel.org/r/20250422171852.85558-1-jeevaka.badrappan@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Userspace is still alive and kicking at this point so actually moving
pinned stuff here is tricky. However, we can instead pre-allocate the
backup storage upfront from the notifier, such that we scoop up as much
as we can, and then leave the final .suspend() to do the actual copy (or
allocate anything that we missed). That way the bulk of our allocations
will hopefully be done outside the more restrictive .suspend().
We do need to be extra careful though, since the pinned handling can now
race with PM notifier, like something becoming unpinned after we prepare
it from the notifier.
v2 (Thomas):
- Fix kernel doc and drop the pin as soon as we are done with the
restore, instead of deferring to later.
Suggested-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250416150913.434369-8-matthew.auld@intel.com
We end up needing to grab both locks together anyway and keep them held
until we complete the copy or add the fence. Plus the backup_obj is
short lived and tied to the parent object, so seems reasonable to share
the same dma-resv. This will simplify the locking here, and in follow
up patches.
v2:
- Hold reference to the parent bo to be sure the shared dma-resv can't
go out of scope too soon. (Thomas)
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://lore.kernel.org/r/20250416150913.434369-7-matthew.auld@intel.com
Calculating the DSS id (index of a steered register) currently
requires reading state from the hwconfig table and that currently
requires dynamically allocating memory. The GuC based register capture
(for dev core dumps) includes this index as part of the register name
in the dump. However, it was calculating said index at the time of the
dump for every dump. That is wasteful. It also breaks anyone trying to
do the dump at a time when memory allocations are not allowed.
So rather than calculating on every print, just calculate at start of
day when creating the register list in the first place.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250417213303.3021243-1-John.C.Harrison@Intel.com
The printing code was doing a test on which list a register was in to
decide whether it is steered or not. That might be valid at this
moment but there may be other reasons for extended lists in the
future. Plus, there is a flag specifically for identifying steered
registers. So, just use that instead - it is simpler and safer.
Signed-off-by: John Harrison <John.C.Harrison@Intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://lore.kernel.org/r/20250417195215.3002210-3-John.C.Harrison@Intel.com
