dt-bindings: Changes for v5.7-rc1
New IDs are added for clocks that are controlled by the PMC. This
replaces older IDs that were erroneously provided by the clock and reset
controller.
This also adds device tree bindings for XUSB pad controller support on
Tegra194 as well as USB role switching on NVIDIA Tegra SoCs.
* tag 'tegra-for-5.7-dt-bindings' of git://git.kernel.org/pub/scm/linux/kernel/git/tegra/linux:
dt-bindings: usb: Add NVIDIA Tegra XUSB device mode controller binding
dt-bindings: phy: tegra-xusb: Add usb-role-switch
dt-bindings: phy: tegra: Add Tegra194 support
dt-bindings: soc: tegra-pmc: Add ID for Tegra PMC 32 kHz blink clock
dt-bindings: soc: tegra-pmc: Add Tegra PMC clock bindings
dt-bindings: tegra: Convert Tegra PMC bindings to YAML
dt-bindings: clock: tegra: Add IDs for OSC clocks
Link: https://lore.kernel.org/r/20200313165848.2915133-1-thierry.reding@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
STM32 DT updates for v5.3, round 1
Highlights:
----------
- Add support for DH Electronics DHCOM SoM and PDK2 rev. 400 carrier
board. It is based on stm32mp157c SoC.
- Add OTG full support on stm32mp15.
- Fix issues seen during yaml validation on stpmic and stmfx.
- Add i2c power/wakeup support on stm32mp15.
- Add card detect on sdcard on stm32mp boards
* tag 'stm32-dt-for-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/atorgue/stm32: (25 commits)
ARM: dts: stm32: use correct vqmmc regu for eMMC on stm32mp1 ED1/EV1 boards
ARM: dts: stm32: add disable-wp property for SD-card on STM32MP1 boards
ARM: dts: stm32: add cd-gpios properties for SD-cards on STM32MP1 boards
ARM: dts: stm32: Do clean up in stmpic nodes on stm32mp15 boards
ARM: dts: stm32: Rename stmfx joystick pins on stm32mp157c-ev1
ARM: dts: stm32: add cpu clock-frequency property on stm32mp15x
ARM: dts: stm32: add wakeup-source in all I2C nodes of stm32mp157c
ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp157c-ed1
ARM: dts: stm32: add i2c2/i2c5 sleep pinctrl on stm32mp157c-ev1
ARM: dts: stm32: add i2c4 sleep pinctrl on stm32mp15xx-dkx
ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp15 DK boards
ARM: dts: stm32: set i2c4 bus freq to 400KHz on stm32mp157c-ed1
ARM: dts: stm32: Correct stmfx node name on stm32mp157c-ev1 board
ARM: dts: stm32: Correct stmfx node name on stm32746g-eval board
ARM: dts: stm32: add resets property on all DMA nodes on stm32mp151
ARM: dts: stm32: enable USB OTG Dual Role on stm32mp157c-ev1
ARM: dts: stm32: add USB OTG pinctrl to stm32mp15
ARM: dts: stm32: add USB OTG full support on stm32mp151
ARM: dts: stm32: remove useless properties in stm32mp157a-avenger96 stmpic node
ARM: dts: stm32: Add DH Electronics DHCOM STM32MP1 SoM and PDK2 board
...
Link: https://lore.kernel.org/r/ded09d01-df47-9572-4679-34669bff8916@st.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas DT binding updates for v5.7
- Document support for the M3ULCB board with R-Car M3-W+.
* tag 'renesas-dt-bindings-for-v5.7-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
dt-bindings: arm: renesas: Add M3ULCB with R-Car M3-W+
Link: https://lore.kernel.org/r/20200313154304.1636-4-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Renesas ARM64 DT updates for v5.7 (take two)
- Thermal support for R-Car M3-W+,
- Support for the M3ULCB board with R-Car M3-W+,
- CPUIdle support for R-Car M3-N and E3,
- Display support for the HiHope RZ/G2M board,
- A minor fix.
* tag 'renesas-arm64-dt-for-v5.7-tag2' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/renesas-devel:
arm64: dts: renesas: Add HiHope RZ/G2M board with idk-1110wr display
arm64: dts: renesas: r8a77990: Add CPUIdle support for CA53 cores
arm64: dts: renesas: r8a77965: Add CPUIdle support for CA57 cores
arm64: dts: renesas: r8a77961: salvator-xs: Fix memory unit-address
arm64: dts: renesas: Add support for M3ULCB with R-Car M3-W+
arm64: dts: renesas: r8a77961: Add thermal nodes
Link: https://lore.kernel.org/r/20200313154304.1636-3-geert+renesas@glider.be
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
This pull request contains Broadcom ARM-based SoCs Device Tree changes
for 5.7, please pull the following:
- Stefan adds GPIO labels to the Raspberry Pi 4 Model B board DTS
- Nicolas moves the eMMC2 controller into its separate node in order for
platform firmware to perform the necessary "dma-ranges" property
patching based on the chip revision since the eMMC controller has
different addressing constraints.
- Florian convers a whole bunch of Broadcom boards bindings from text to
YAML.
* tag 'arm-soc/for-5.7/devicetree' of https://github.com/Broadcom/stblinux:
dt-bindings: arm: Document Broadcom SoCs 'secondary-boot-reg'
dt-bindings: arm: bcm: Convert Vulcan to YAML
dt-bindings: arm: bcm: Convert BCM11351 to YAML
dt-bindings: arm: bcm: Convert BCM4708 to YAML
dt-bindings: arm: bcm: Convert BCM23550 to YAML
dt-bindings: arm: bcm: Convert BCM21664 to YAML
dt-bindings: arm: bcm: Convert Stingray to YAML
dt-bindings: arm: bcm: Convert Northstar 2 to YAML
dt-bindings: arm: bcm: Convert Northstar Plus to YAML
dt-bindings: arm: bcm: Convert Hurricane 2 to YAML
dt-bindings: arm: bcm: Convert Cygnus to YAML
ARM: dts: bcm2711: Move emmc2 into its own bus
ARM: dts: bcm2711-rpi-4-b: Add SoC GPIO labels
Link: https://lore.kernel.org/r/20200311212012.9418-2-f.fainelli@gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Devicetree changes for omaps for v5.7 merge window
Few device tree changes for omaps for v5.7 to configure omap5
AESS module and to add idle_states for am335x and am437x cpuidle.
* tag 'omap-for-v5.7/dt-signed' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: am4372: Add idle_states for cpuidle
ARM: dts: am33xx: Add idle_states for cpuidle
ARM: dts: Configure omap5 AESS
Link: https://lore.kernel.org/r/pull-1583511417-919838@atomide.com-4
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Versatile DTS updates for the v5.7 series take one:
- Schema validation for the top level of all ARM reference
designs: Integrator, Versatile, RealView, Juno.
- Clean up some node names in the trees so they pass
validation fine.
- Drop the old text bindings.
- A top level DMA ranges patch from Rob.
* tag 'versatile-dts-v5.7-1' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-integrator:
ARM/arm64: dts: Rename SMB bus to just bus
dt-bindings: arm: Drop the non-YAML bindings
dt-bindings: arm: Add Versatile Express and Juno YAML schema
dt-bindings: arm: Add RealView YAML schema
dt-bindings: arm: Add Versatile YAML schema
dt-bindings: arm: Add Integrator YAML schema
ARM: dts: RealView: Fix the name of the SoC node
ARM: dts: Versatile: Use syscon as node name for IB2
ARM: dts: integratorap: Remove top level dma-ranges
Link: https://lore.kernel.org/r/CACRpkdbbniYVnsE-pAmU2qCerswserNgEFtY48XQ+_K+DUNC9Q@mail.gmail.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
On those boards, as stated in schematics files, the regulator used for IOs
is VDD. It was wrongly set to v3v3.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On STM32MP1 DK1, DK2, ED1 and EV1 boards, there is only a micro SD socket.
This is also the case on Avenger board.
They don't support the Write Protect pin.
The disable-wp is then added in the SD-cards sdmmc1 nodes.
This avoids executing some code and a warning during driver probe.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
The broken-cd properties are replaced with cd-gpios, with the correct
GPIO to detect the card insertion. The GPIO lines require a pull-up.
Signed-off-by: Yann Gautier <yann.gautier@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Remove unused properties from stpmic node.
The issues have been detected by running dtbs_check.
Signed-off-by: Benjamin Gaignard <benjamin.gaignard@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add the wakeup-source property in all i2c nodes of
the SoC stm32mp157c so that those I2C controllers can become
wakeup-source.
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add the sleep state pinctrl entry for the i2c4 node
of the stm32mp157c-ed1 board.
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add the sleep state pinctrl entry for the i2c2 and i2c5 nodes
of the stm32mp157c-ev1 board.
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add the sleep state pinctrl entry for the i2c4 node
of the stm32mp15xx-dkx.dtsi
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On DK boards, all I2C4 bus slaves supports I2C Fast Mode hence setting
the bus frequency to 400 KHz.
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
On this board, the I2C4 bus has only a single slave (pmic) which
supports I2C Fast Mode hence setting bus frequency to 400 KHz.
Signed-off-by: Alain Volmat <alain.volmat@st.com>
Signed-off-by: Alexandre Torgue <alexandre.torgue@st.com>
Add device-tree binding documentation for the XUSB device mode controller
present on Tegra210 and Tegra186 SoC. This controller supports the USB 3.0
specification.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Acked-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Add usb-role-switch property for Tegra210 and Tegra186 platforms. This
entry is used by XUSB pad controller driver to register for role changes
for OTG/Peripheral capable USB 2 ports.
Signed-off-by: Nagarjuna Kristam <nkristam@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Extend the bindings to cover the set of features found in Tegra194.
Note that, technically, there are four more supplies connected to the
XUSB pad controller (DVDD_PEX, DVDD_PEX_PLL, HVDD_PEX and HVDD_PEX_PLL)
, but the power sequencing requirements of Tegra194 require these to be
under the control of the PMIC.
Tegra194 XUSB PADCTL supports up to USB 3.1 Gen 2 speed, however, it
is possible for some platforms have long signal trace that could not
provide sufficient electrical environment for Gen 2 speed. This patch
adds a "maximum-speed" property to usb3 ports which can be used to
specify the maximum supported speed for any particular USB 3.1 port.
For a port that is not capable of SuperSpeedPlus, "maximum-speed"
property should carry "super-speed".
Signed-off-by: JC Kuo <jckuo@nvidia.com>
Acked-by: Thierry Reding <treding@nvidia.com>
Acked-by: Rob Herring <robh@kernel.org>
Signed-off-by: Thierry Reding <treding@nvidia.com>
Register range of display clocks is 0x10000, as it can be seen from
DE2 documentation.
Fix it.
Signed-off-by: Jernej Skrabec <jernej.skrabec@siol.net>
Fixes: 2c796fc8f5 ("arm64: dts: allwinner: a64: add necessary device tree nodes for DE2 CCU")
[wens@csie.org: added fixes tag]
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
On the Generic SODIMM Development Platform there is an RGB LCD panel
directly connected to the DU output. It uses the TPU0 as backlight, one
GPIO pull-up configuration for power enable, R[2:7], G[2:7], B[2:7],
VSYNC, HSYNC, DU0_DISP and, DU0_CLK as inputs.
There is no encoder between the DU and the panel, therefore the default
connector driver is used.
The two variants of the iW-G22D should be mutually exclusive, therefore
this patch also disables the RGB LCD display when the HDMI extension board
is used.
Signed-off-by: Marian-Cristian Rotariu <marian-cristian.rotariu.rb@bp.renesas.com>
Link: https://lore.kernel.org/r/1583239490-8837-1-git-send-email-marian-cristian.rotariu.rb@bp.renesas.com
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Consolidate and move the 'secondary-boot-reg' property from the 3
existing binding documents into the main cpus.yaml documentation, also
make sure that the property is enforced when relevant.
Acked-by: Maxime Ripard <mripard@kernel.org>
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update Vulcan SoC family binding document for boards/SoCs to use YAML.
Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM11351 SoC family binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM4708 SoC family binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM23550 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom BCM21664 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Stingray SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Northstar 2 SoC binding document for boards/SoCs to
use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Northstar Plus SoC binding document for boards/SoCs
to use YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadcom Hurricane 2 SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Update the Broadocom Cygnus SoC binding document for boards/SoCs to use
YAML. Verified with dt_binding_check and dtbs_check.
Acked-by: Scott Branden <scott.branden@broadcom.com>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
