Russell King reports that on the ZII dev rev B, deleting a bridge VLAN
from a user port fails with -ENOENT:
https://lore.kernel.org/netdev/Z_lQXNP0s5-IiJzd@shell.armlinux.org.uk/
This comes from mv88e6xxx_port_vlan_leave() -> mv88e6xxx_mst_put(),
which tries to find an MST entry in &chip->msts associated with the SID,
but fails and returns -ENOENT as such.
But we know that this chip does not support MST at all, so that is not
surprising. The question is why does the guard in mv88e6xxx_mst_put()
not exit early:
if (!sid)
return 0;
And the answer seems to be simple: the sid comes from vlan.sid which
supposedly was previously populated by mv88e6xxx_vtu_get().
But some chip->info->ops->vtu_getnext() implementations do not populate
vlan.sid, for example see mv88e6185_g1_vtu_getnext(). In that case,
later in mv88e6xxx_port_vlan_leave() we are using a garbage sid which is
just residual stack memory.
Testing for sid == 0 covers all cases of a non-bridge VLAN or a bridge
VLAN mapped to the default MSTI. For some chips, SID 0 is valid and
installed by mv88e6xxx_stu_setup(). A chip which does not support the
STU would implicitly only support mapping all VLANs to the default MSTI,
so although SID 0 is not valid, it would be sufficient, if we were to
zero-initialize the vlan structure, to fix the bug, due to the
coincidence that a test for vlan.sid == 0 already exists and leads to
the same (correct) behavior.
Another option which would be sufficient would be to add a test for
mv88e6xxx_has_stu() inside mv88e6xxx_mst_put(), symmetric to the one
which already exists in mv88e6xxx_mst_get(). But that placement means
the caller will have to dereference vlan.sid, which means it will access
uninitialized memory, which is not nice even if it ignores it later.
So we end up making both modifications, in order to not rely just on the
sid == 0 coincidence, but also to avoid having uninitialized structure
fields which might get temporarily accessed.
Fixes: acaf4d2e36 ("net: dsa: mv88e6xxx: MST Offloading")
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414212913.2955253-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Russell King reports that a system with mv88e6xxx dereferences a NULL
pointer when unbinding this driver:
https://lore.kernel.org/netdev/Z_lRkMlTJ1KQ0kVX@shell.armlinux.org.uk/
The crash seems to be in devlink_region_destroy(), which is not NULL
tolerant but is given a NULL devlink global region pointer.
At least on some chips, some devlink regions are conditionally registered
since the blamed commit, see mv88e6xxx_setup_devlink_regions_global():
if (cond && !cond(chip))
continue;
These are MV88E6XXX_REGION_STU and MV88E6XXX_REGION_PVT. If the chip
does not have an STU or PVT, it should crash like this.
To fix the issue, avoid unregistering those regions which are NULL, i.e.
were skipped at mv88e6xxx_setup_devlink_regions_global() time.
Fixes: 836021a2d0 ("net: dsa: mv88e6xxx: Export cross-chip PVT as devlink region")
Tested-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Link: https://patch.msgid.link/20250414212850.2953957-1-vladimir.oltean@nxp.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When txgbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in txgbe_probe() function, the subsequent
error paths after txgbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when txgbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 937d46ecc5 ("net: wangxun: add ethtool_ops for channel number")
Reported-by: Jiawen Wu <jiawenwu@trustnetic.com>
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250415032910.13139-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When adding a bridge vlan that is pvid or untagged after the vlan has
already been added to any other switchdev backed port, the vlan change
will be propagated as changed, since the flags change.
This causes the vlan to not be added to the hardware for DSA switches,
since the DSA handler ignores any vlans for the CPU or DSA ports that
are changed.
E.g. the following order of operations would work:
$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev swbridge vid 1 pvid untagged self
$ bridge vlan add dev lan1 vid 1 pvid untagged
but this order would break:
$ ip link add swbridge type bridge vlan_filtering 1 vlan_default_pvid 0
$ ip link set lan1 master swbridge
$ bridge vlan add dev lan1 vid 1 pvid untagged
$ bridge vlan add dev swbridge vid 1 pvid untagged self
Additionally, the vlan on the bridge itself would become undeletable:
$ bridge vlan
port vlan-id
lan1 1 PVID Egress Untagged
swbridge 1 PVID Egress Untagged
$ bridge vlan del dev swbridge vid 1 self
$ bridge vlan
port vlan-id
lan1 1 PVID Egress Untagged
swbridge 1 Egress Untagged
since the vlan was never added to DSA's vlan list, so deleting it will
cause an error, causing the bridge code to not remove it.
Fix this by checking if flags changed only for vlans that are already
brentry and pass changed as false for those that become brentries, as
these are a new vlan (member) from the switchdev point of view.
Since *changed is set to true for becomes_brentry = true regardless of
would_change's value, this will not change any rtnetlink notification
delivery, just the value passed on to switchdev in vlan->changed.
Fixes: 8d23a54f5b ("net: bridge: switchdev: differentiate new VLANs from changed ones")
Reviewed-by: Vladimir Oltean <vladimir.oltean@nxp.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Reviewed-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: Nikolay Aleksandrov <razor@blackwall.org>
Link: https://patch.msgid.link/20250414200020.192715-1-jonas.gorski@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
ynl: avoid leaks in attr override and spec fixes for C
The C rt-link work revealed more problems in existing codegen
and classic netlink specs.
Patches 1 - 4 fix issues with the codegen. Patches 1 and 2 are
pre-requisites for patch 3. Patch 3 fixes leaking memory if user
tries to override already set attr. Patch 4 validates attrs in case
kernel sends something we don't expect.
Remaining patches fix and align the specs. Patch 5 changes nesting,
the rest are naming adjustments.
====================
Link: https://patch.msgid.link/20250414211851.602096-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Attach ndm- to all members of struct nfmsg. We could possibly
use name-prefix just for C, but I don't think we have any precedent
for using name-prefix on structs, and other rtnetlink sub-specs
give full names for fixed header struct members.
Fixes: bc515ed066 ("netlink: specs: Add a spec for neighbor tables in rtnetlink")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-9-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
MCTP attribute naming is inconsistent. In C we have:
IFLA_MCTP_NET,
IFLA_MCTP_PHYS_BINDING,
^^^^
but in YAML:
- mctp-net
- phys-binding
^
no "mctp"
It's unclear whether the "mctp" part of the name is supposed
to be a prefix or part of attribute name. Make it a prefix,
seems cleaner, even tho technically phys-binding was added later.
Fixes: b2f63d904e ("doc/netlink: Add spec for rt link messages")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user calls request_attrA_set() multiple times (for the same
attribute), and attrA is of type which allocates memory -
we try to free the previously associated values. For array
types (including multi-attr) we have only freed the array,
but the array may have contained pointers.
Refactor the code generation for free attr and reuse the generated
lines in setters to flush out the previous state. Since setters
are static inlines in the header we need to add forward declarations
for the free helpers of pure nested structs. Track which types get
used by arrays and include the right forwad declarations.
At least ethtool string set and bit set would not be freed without
this. Tho, admittedly, overriding already set attribute twice is likely
a very very rare thing to do.
Fixes: be5bea1cc0 ("net: add basic C code generators for Netlink")
Reviewed-by: Donald Hunter <donald.hunter@gmail.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414211851.602096-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the for loop used to allocate the loc_array and bmap for each port, a
memory leak is possible when the allocation for loc_array succeeds,
but the allocation for bmap fails. This is because when the control flow
goes to the label free_eth_finfo, only the allocations starting from
(i-1)th iteration are freed.
Fix that by freeing the loc_array in the bmap allocation error path.
Fixes: d915c299f1 ("cxgb4: add skeleton for ethtool n-tuple filters")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20250414170649.89156-1-abdun.nihaal@gmail.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Marc Kleine-Budde says:
====================
pull-request: can 2025-04-15
The first patch is by Davide Caratti and fixes the missing derement in
the protocol inuse counter for the J1939 CAN protocol.
The last patch is by Weizhao Ouyang and fixes a broken quirks check in
the rockchip CAN-FD driver.
* tag 'linux-can-fixes-for-6.15-20250415' of git://git.kernel.org/pub/scm/linux/kernel/git/mkl/linux-can:
can: rockchip_canfd: fix broken quirks checks
can: fix missing decrement of j1939_proto.inuse_idx
====================
Link: https://patch.msgid.link/20250415103401.445981-1-mkl@pengutronix.de
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Ido Schimmel says:
====================
fib_rules: Fix iif / oif matching on L3 master device
Patch #1 fixes a recently reported regression regarding FIB rules that
match on iif / oif being a VRF device.
Patch #2 adds test cases to the FIB rules selftest.
====================
Link: https://patch.msgid.link/20250414172022.242991-1-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add tests for FIB rules that match on iif / oif being a VRF device. Test
both good and bad flows.
With previous patch ("net: fib_rules: Fix iif / oif matching on L3
master device"):
# ./fib_rule_tests.sh
[...]
Tests passed: 328
Tests failed: 0
Without it:
# ./fib_rule_tests.sh
[...]
Tests passed: 324
Tests failed: 4
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-3-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Before commit 40867d74c3 ("net: Add l3mdev index to flow struct and
avoid oif reset for port devices") it was possible to use FIB rules to
match on a L3 domain. This was done by having a FIB rule match on iif /
oif being a L3 master device. It worked because prior to the FIB rule
lookup the iif / oif fields in the flow structure were reset to the
index of the L3 master device to which the input / output device was
enslaved to.
The above scheme made it impossible to match on the original input /
output device. Therefore, cited commit stopped overwriting the iif / oif
fields in the flow structure and instead stored the index of the
enslaving L3 master device in a new field ('flowi_l3mdev') in the flow
structure.
While the change enabled new use cases, it broke the original use case
of matching on a L3 domain. Fix this by interpreting the iif / oif
matching on a L3 master device as a match against the L3 domain. In
other words, if the iif / oif in the FIB rule points to a L3 master
device, compare the provided index against 'flowi_l3mdev' rather than
'flowi_{i,o}if'.
Before cited commit, a FIB rule that matched on 'iif vrf1' would only
match incoming traffic from devices enslaved to 'vrf1'. With the
proposed change (i.e., comparing against 'flowi_l3mdev'), the rule would
also match traffic originating from a socket bound to 'vrf1'. Avoid that
by adding a new flow flag ('FLOWI_FLAG_L3MDEV_OIF') that indicates if
the L3 domain was derived from the output interface or the input
interface (when not set) and take this flag into account when evaluating
the FIB rule against the flow structure.
Avoid unnecessary checks in the data path by detecting that a rule
matches on a L3 master device when the rule is installed and marking it
as such.
Tested using the following script [1].
Output before 40867d74c3 (v5.4.291):
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
Output after 40867d74c3:
default dev dummy1 table 300 scope link
default dev dummy1 table 300 scope link
Output with this patch:
default dev dummy1 table 100 scope link
default dev dummy1 table 200 scope link
[1]
#!/bin/bash
ip link add name vrf1 up type vrf table 10
ip link add name dummy1 up master vrf1 type dummy
sysctl -wq net.ipv4.conf.all.forwarding=1
sysctl -wq net.ipv4.conf.all.rp_filter=0
ip route add table 100 default dev dummy1
ip route add table 200 default dev dummy1
ip route add table 300 default dev dummy1
ip rule add prio 0 oif vrf1 table 100
ip rule add prio 1 iif vrf1 table 200
ip rule add prio 2 table 300
ip route get 192.0.2.1 oif dummy1 fibmatch
ip route get 192.0.2.1 iif dummy1 from 198.51.100.1 fibmatch
Fixes: 40867d74c3 ("net: Add l3mdev index to flow struct and avoid oif reset for port devices")
Reported-by: hanhuihui <hanhuihui5@huawei.com>
Closes: https://lore.kernel.org/netdev/ec671c4f821a4d63904d0da15d604b75@huawei.com/
Signed-off-by: Ido Schimmel <idosch@nvidia.com>
Acked-by: David Ahern <dsahern@kernel.org>
Link: https://patch.msgid.link/20250414172022.242991-2-idosch@nvidia.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When ngbe_sw_init() is called, memory is allocated for wx->rss_key
in wx_init_rss_key(). However, in ngbe_probe() function, the subsequent
error paths after ngbe_sw_init() don't free the rss_key. Fix that by
freeing it in error path along with wx->mac_table.
Also change the label to which execution jumps when ngbe_sw_init()
fails, because otherwise, it could lead to a double free for rss_key,
when the mac_table allocation fails in wx_sw_init().
Fixes: 02338c484a ("net: ngbe: Initialize sw info and register netdev")
Signed-off-by: Abdun Nihaal <abdun.nihaal@gmail.com>
Reviewed-by: Kory Maincent <kory.maincent@bootlin.com>
Reviewed-by: Jiawen Wu <jiawenwu@trustnetic.com>
Link: https://patch.msgid.link/20250412154927.25908-1-abdun.nihaal@gmail.com
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Tony Nguyen says:
====================
igc: Fix PTM timeout
Christopher S M Hall says:
There have been sporadic reports of PTM timeouts using i225/i226 devices
These timeouts have been root caused to:
1) Manipulating the PTM status register while PTM is enabled
and triggered
2) The hardware retrying too quickly when an inappropriate response
is received from the upstream device
The issue can be reproduced with the following:
$ sudo phc2sys -R 1000 -O 0 -i tsn0 -m
Note: 1000 Hz (-R 1000) is unrealistically large, but provides a way to
quickly reproduce the issue.
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
The first patch in this series also resolves an issue reported by Corinna
Vinschen relating to kdump:
This patch also fixes a hang in igc_probe() when loading the igc
driver in the kdump kernel on systems supporting PTM.
The igc driver running in the base kernel enables PTM trigger in
igc_probe(). Therefore the driver is always in PTM trigger mode,
except in brief periods when manually triggering a PTM cycle.
When a crash occurs, the NIC is reset while PTM trigger is enabled.
Due to a hardware problem, the NIC is subsequently in a bad busmaster
state and doesn't handle register reads/writes. When running
igc_probe() in the kdump kernel, the first register access to a NIC
register hangs driver probing and ultimately breaks kdump.
With this patch, igc has PTM trigger disabled most of the time,
and the trigger is only enabled for very brief (10 - 100 us) periods
when manually triggering a PTM cycle. Chances that a crash occurs
during a PTM trigger are not zero, but extremly reduced.
* '1GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue:
igc: add lock preventing multiple simultaneous PTM transactions
igc: cleanup PTP module if probe fails
igc: handle the IGC_PTP_ENABLED flag correctly
igc: move ktime snapshot into PTM retry loop
igc: increase wait time before retrying PTM
igc: fix PTM cycle trigger logic
====================
Link: https://patch.msgid.link/20250411162857.2754883-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
We started generating C code for OvS a while back, but actually
C codegen only supports fixed headers specified at the family
level right now (schema also allows specifying them per op).
ovs_flow and ovs_datapath already specify the fixed header
at the family level but ovs_vport does it per op.
Move the property, all ops use the same header.
This ensures YNL C sees the correct hdr_len:
const struct ynl_family ynl_ovs_vport_family = {
.name = "ovs_vport",
- .hdr_len = sizeof(struct genlmsghdr),
+ .hdr_len = sizeof(struct genlmsghdr) + sizeof(struct ovs_header),
};
Fixes: 7c59c9c8f2 ("tools: ynl: generate code for ovs families")
Link: https://patch.msgid.link/20250409145541.580674-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Lockdep found the following dependency:
&dev_instance_lock_key#3 -->
&rdev->wiphy.mtx -->
&net->xdp.lock -->
&xs->mutex -->
&dev_instance_lock_key#3
The first dependency is the problem. wiphy mutex should be outside
the instance locks. The problem happens in notifiers (as always)
for CLOSE. We only hold the instance lock for ops locked devices
during CLOSE, and WiFi netdevs are not ops locked. Unfortunately,
when we dev_close_many() during netns dismantle we may be holding
the instance lock of _another_ netdev when issuing a CLOSE for
a WiFi device.
Lockdep's "Possible unsafe locking scenario" only prints 3 locks
and we have 4, plus I think we'd need 3 CPUs, like this:
CPU0 CPU1 CPU2
---- ---- ----
lock(&xs->mutex);
lock(&dev_instance_lock_key#3);
lock(&rdev->wiphy.mtx);
lock(&net->xdp.lock);
lock(&xs->mutex);
lock(&rdev->wiphy.mtx);
lock(&dev_instance_lock_key#3);
Tho, I don't think that's possible as CPU1 and CPU2 would
be under rtnl_lock. Even if we have per-netns rtnl_lock and
wiphy can span network namespaces - CPU0 and CPU1 must be
in the same netns to see dev_instance_lock, so CPU0 can't
be installing a socket as CPU1 is tearing the netns down.
Regardless, our expected lock ordering is that wiphy lock
is taken before instance locks, so let's fix this.
Go over the ops locked and non-locked devices separately.
Note that calling dev_close_many() on an empty list is perfectly
fine. All processing (including RCU syncs) are conditional
on the list not being empty, already.
Fixes: 7e4d784f58 ("net: hold netdev instance lock during rtnetlink operations")
Reported-by: syzbot+6f588c78bf765b62b450@syzkaller.appspotmail.com
Acked-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250412233011.309762-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
After detecting the np_link_fail exception,
the driver attempts to fix the exception by
using phy_stop() and phy_start() in the scheduled task.
However, hbg_fix_np_link_fail() and .ndo_stop()
may be concurrently executed. As a result,
phy_stop() is executed twice, and the following Calltrace occurs:
hibmcge 0000:84:00.2 enp132s0f2: Link is Down
hibmcge 0000:84:00.2: failed to link between MAC and PHY, try to fix...
------------[ cut here ]------------
called from state HALTED
WARNING: CPU: 71 PID: 23391 at drivers/net/phy/phy.c:1503 phy_stop...
...
pc : phy_stop+0x138/0x180
lr : phy_stop+0x138/0x180
sp : ffff8000c76bbd40
x29: ffff8000c76bbd40 x28: 0000000000000000 x27: 0000000000000000
x26: ffff2020047358c0 x25: ffff202004735940 x24: ffff20200000e405
x23: ffff2020060e5178 x22: ffff2020060e4000 x21: ffff2020060e49c0
x20: ffff2020060e5170 x19: ffff20202538e000 x18: 0000000000000020
x17: 0000000000000000 x16: ffffcede02e28f40 x15: ffffffffffffffff
x14: 0000000000000000 x13: 205d313933333254 x12: 5b5d393430303233
x11: ffffcede04555958 x10: ffffcede04495918 x9 : ffffcede0274fee0
x8 : 00000000000bffe8 x7 : c0000000ffff7fff x6 : 0000000000000001
x5 : 00000000002bffa8 x4 : 0000000000000000 x3 : 0000000000000000
x2 : 0000000000000000 x1 : 0000000000000000 x0 : ffff20202e429480
Call trace:
phy_stop+0x138/0x180
hbg_fix_np_link_fail+0x4c/0x90 [hibmcge]
hbg_service_task+0xfc/0x148 [hibmcge]
process_one_work+0x180/0x398
worker_thread+0x210/0x328
kthread+0xe0/0xf0
ret_from_fork+0x10/0x20
---[ end trace 0000000000000000 ]---
This patch adds the rtnl_lock to hbg_fix_np_link_fail()
to ensure that other operations are not performed concurrently.
In addition, np_link_fail exception can be fixed
only when the PHY is link.
Fixes: e0306637e8 ("net: hibmcge: Add support for mac link exception handling feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410021327.590362-8-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The MAC hardware supports receiving two types of
pause frames from link partner.
One is a pause frame with a destination address
of 01:80:C2:00:00:01.
The other is a pause frame whose destination address
is the address of the hibmcge driver.
01:80:C2:00:00:01 is supported by default.
In .ndo_set_mac_address(), the hibmcge driver calls
.hbg_hw_set_rx_pause_mac_addr() to set its mac address as the
destination address of the rx puase frame.
Therefore, pause frames with two types of MAC addresses can be received.
Currently, the rx pause addr does not restored after reset.
As a result, pause frames whose destination address is
the hibmcge driver address cannot be correctly received.
This patch restores the configuration by calling
.hbg_hw_set_rx_pause_mac_addr() after reset is complete.
Fixes: 3f5a61f6d5 ("net: hibmcge: Add reset supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410021327.590362-7-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In the debugfs file, the driver displays the np_link fail state
based on the HBG_NIC_STATE_NP_LINK_FAIL.
However, HBG_NIC_STATE_NP_LINK_FAIL is cleared in hbg_service_task()
So, this value of np_link fail is always false.
This patch directly reads the related register to display the real state.
Fixes: e0306637e8 ("net: hibmcge: Add support for mac link exception handling feature")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410021327.590362-6-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
A dbg log is generated when the driver modifies the MTU,
which is expected to trace the change of the MTU.
However, the log is recorded after WRITE_ONCE().
At this time, netdev->mtu has been changed to the new value.
As a result, netdev->mtu is the same as new_mtu.
This patch modifies the log location and records logs before WRITE_ONCE().
Fixes: ff4edac6e9 ("net: hibmcge: Implement some .ndo functions")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410021327.590362-5-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
hbg_irqs is a global array which contains irq statistics.
However, the irq statistics of different network ports
point to the same global array. As a result, the statistics are incorrect.
This patch allocates a statistics array for each network port
to prevent the statistics of different network ports
from affecting each other.
irq statistics are removed from hbg_irq_info. Therefore,
all data in hbg_irq_info remains unchanged. Therefore,
the input parameter of some functions is changed to const.
Fixes: 4d089035fa ("net: hibmcge: Add interrupt supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410021327.590362-4-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
The driver supports pause frames,
but does not pass pause frames based on rx pause enable configuration,
resulting in incorrect pause frame statistics.
like this:
mz eno3 '01 80 c2 00 00 01 00 18 2d 04 00 9c 88 08 00 01 ff ff' \
-p 64 -c 100
ethtool -S enp132s0f2 | grep -v ": 0"
NIC statistics:
rx_octets_total_filt_cnt: 6800
rx_filt_pkt_cnt: 100
The rx pause frames are filtered by the MAC hardware.
This patch configures pass pause frames based on the
rx puase enable status to ensure that
rx pause frames are not filtered.
mz eno3 '01 80 c2 00 00 01 00 18 2d 04 00 9c 88 08 00 01 ff ff' \
-p 64 -c 100
ethtool --include-statistics -a enp132s0f2
Pause parameters for enp132s0f2:
Autonegotiate: on
RX: on
TX: on
RX negotiated: on
TX negotiated: on
Statistics:
tx_pause_frames: 0
rx_pause_frames: 100
Fixes: 3a03763f38 ("net: hibmcge: Add pauseparam supported in this module")
Signed-off-by: Jijie Shao <shaojijie@huawei.com>
Reviewed-by: Michal Swiatkowski <michal.swiatkowski@linux.intel.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20250410021327.590362-2-shaojijie@huawei.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
syzbot reports a case of ethtool_ops->get_link being called without
ops lock:
ethtool_op_get_link+0x15/0x60 net/ethtool/ioctl.c:63
bond_check_dev_link+0x1fb/0x4b0 drivers/net/bonding/bond_main.c:864
bond_miimon_inspect drivers/net/bonding/bond_main.c:2734 [inline]
bond_mii_monitor+0x49d/0x3170 drivers/net/bonding/bond_main.c:2956
process_one_work kernel/workqueue.c:3238 [inline]
process_scheduled_works+0xac3/0x18e0 kernel/workqueue.c:3319
worker_thread+0x870/0xd50 kernel/workqueue.c:3400
kthread+0x7b7/0x940 kernel/kthread.c:464
ret_from_fork+0x4b/0x80 arch/x86/kernel/process.c:153
ret_from_fork_asm+0x1a/0x30 arch/x86/entry/entry_64.S:245
Commit 04efcee6ef ("net: hold instance lock during NETDEV_CHANGE")
changed to lockless __linkwatch_sync_dev in ethtool_op_get_link.
All paths except bonding are coming via locked ioctl. Add necessary
locking to bonding.
Reviewed-by: Hangbin Liu <liuhangbin@gmail.com>
Reported-by: syzbot+48c14f61594bdfadb086@syzkaller.appspotmail.com
Closes: https://syzkaller.appspot.com/bug?extid=48c14f61594bdfadb086
Fixes: 04efcee6ef ("net: hold instance lock during NETDEV_CHANGE")
Signed-off-by: Stanislav Fomichev <sdf@fomichev.me>
Link: https://patch.msgid.link/20250410161117.3519250-1-sdf@fomichev.me
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Johannes Berg says:
====================
Just a handful of fixes, notably
- iwlwifi: various build warning fixes (e.g. PM_SLEEP)
- iwlwifi: fix operation when FW reset handshake times out
- mac80211: drop pending frames on interface down
* tag 'wireless-2025-04-11' of https://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless:
Revert "wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()"
wifi: iwlwifi: mld: Restart firmware on iwl_mld_no_wowlan_resume() error
wifi: iwlwifi: pcie: set state to no-FW before reset handshake
wifi: wl1251: fix memory leak in wl1251_tx_work
wifi: brcmfmac: fix memory leak in brcmf_get_module_param
wifi: iwlwifi: mld: silence uninitialized variable warning
wifi: mac80211: Purge vif txq in ieee80211_do_stop()
wifi: mac80211: Update skb's control block key in ieee80211_tx_dequeue()
wifi: at76c50x: fix use after free access in at76_disconnect
wifi: add wireless list to MAINTAINERS
iwlwifi: mld: fix building with CONFIG_PM_SLEEP disabled
wifi: iwlwifi: mld: fix PM_SLEEP -Wundef warning
wifi: iwlwifi: mld: reduce scope for uninitialized variable
====================
Link: https://patch.msgid.link/20250411142354.24419-3-johannes@sipsolutions.net
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Add a mutex around the PTM transaction to prevent multiple transactors
Multiple processes try to initiate a PTM transaction, one or all may
fail. This can be reproduced by running two instances of the
following:
$ sudo phc2sys -O 0 -i tsn0 -m
PHC2SYS exits with:
"ioctl PTP_OFFSET_PRECISE: Connection timed out" when the PTM transaction
fails
Note: Normally two instance of PHC2SYS will not run, but one process
should not break another.
Fixes: a90ec84837 ("igc: Add support for PTP getcrosststamp()")
Signed-off-by: Christopher S M Hall <christopher.s.hall@intel.com>
Reviewed-by: Corinna Vinschen <vinschen@redhat.com>
Signed-off-by: Jacob Keller <jacob.e.keller@intel.com>
Tested-by: Mor Bar-Gabay <morx.bar.gabay@intel.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
