Pointer tx_key is being assigned a value that is never read, it is
being re-assigned a new value later. The assignment is redundant
and can be removed.
Cleans up clan scan build warning:
drivers/staging/vt6655/rxtx.c:1311:3: warning: Value stored
to 'tx_key' is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220307143625.136189-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pointer w is being assigned a value that is never read, it is
being re-assigned a new value later. The assignment is redundant
and can be removed.
Cleans up clan scan build warning:
drivers/staging/gdm724x/gdm_lte.c:198:2: warning: Value stored to 'w'
is never read [deadcode.DeadStores]
Signed-off-by: Colin Ian King <colin.i.king@gmail.com>
Link: https://lore.kernel.org/r/20220307144603.136846-1-colin.i.king@gmail.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix the cpuintc and fixedregulator dtc warnings:
Warning (unit_address_vs_reg): /cpuintc@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /fixedregulator@0: node has a unit name, but no reg property
Warning (unit_address_vs_reg): /fixedregulator@1: node has a unit name, but no reg property
Warning (unique_unit_address): /cpuintc@0: duplicate unit-address (also used in node /fixedregulator@0)
Remove the unnecessary status = "okay" property from the xhci node.
Reviewed-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220312091832.6269-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Fix LED and pinctrl definitions on the GB-PC1 devicetree. Refer to the
schematics of the device for more information.
LED fixes:
- Change GPIO6 LED label from system to power as GPIO6 is connected to
PLED.
- Add default-on default-trigger to power LED.
- Change GPIO8 LED label from status to system as GPIO8 is connected to
SYS_LED.
- Add disk-activity default-trigger to system LED.
- Switch to the color:function naming scheme.
- Remove lan1 and lan2 LEDs as they don't exist.
Pinctrl fixes:
- Claim state_default node under pinctrl node.
- Change pinctrl0 node name to state-default.
- Change gpio node name to gpio-pinmux to respect
Documentation/devicetree/bindings/pinctrl/ralink,rt2880-pinmux.yaml.
- Sort pin groups alphabetically.
Misc fixes:
- Fix formatting.
- Use the status value "okay".
- Define hexadecimal addresses in lower case.
- Make hexadecimal addresses for memory easier to read.
Link: https://github.com/ngiger/GnuBee_Docs/blob/master/GB-PCx/Documents/GB-PC1_V1.0_Schematic.pdf
Tested-by: Sergio Paracuellos <sergio.paracuellos@gmail.com>
Signed-off-by: Arınç ÜNAL <arinc.unal@arinc9.com>
Link: https://lore.kernel.org/r/20220311090320.3068-1-arinc.unal@arinc9.com
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Pull x86 fixes from Borislav Petkov:
- Free shmem backing storage for SGX enclave pages when those are
swapped back into EPC memory
- Prevent do_int3() from being kprobed, to avoid recursion
- Remap setup_data and setup_indirect structures properly when
accessing their members
- Correct the alternatives patching order for modules too
* tag 'x86_urgent_for_v5.17_rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/sgx: Free backing memory after faulting the enclave page
x86/traps: Mark do_int3() NOKPROBE_SYMBOL
x86/boot: Add setup_indirect support in early_memremap_is_setup_data()
x86/boot: Fix memremap of setup_indirect structures
x86/module: Fix the paravirt vs alternative order
Pull perf tools fixes from Arnaldo Carvalho de Melo:
- Fix event parser error for hybrid systems
- Fix NULL check against wrong variable in 'perf bench' and in the
parsing code
- Update arm64 KVM headers from the kernel sources
- Sync cpufeatures header with the kernel sources
* tag 'perf-tools-fixes-for-v5.17-2022-03-12' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
perf parse: Fix event parser error for hybrid systems
perf bench: Fix NULL check against wrong variable
perf parse-events: Fix NULL check against wrong variable
tools headers cpufeatures: Sync with the kernel sources
tools kvm headers arm64: Update KVM headers from the kernel sources
Pull drm kconfig fix from Dave Airlie:
"Thorsten pointed out this had fallen down the cracks and was in -next
only, I've picked it out, fixed up it's Fixes: line.
- fix regression in Kconfig"
* tag 'drm-fixes-2022-03-12' of git://anongit.freedesktop.org/drm/drm:
drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP
This bug happened on hybrid systems when both cpu_core and cpu_atom
have the same event name such as "UOPS_RETIRED.MS" while their event
terms are different, then during perf stat, the event for cpu_atom
will parse fail and then no output for cpu_atom.
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/
It is because event terms in the "head" of parse_events_multi_pmu_add
will be changed to event terms for cpu_core after parsing UOPS_RETIRED.MS
for cpu_core, then when parsing the same event for cpu_atom, it still
uses the event terms for cpu_core, but event terms for cpu_atom are
different with cpu_core, the event parses for cpu_atom will fail. This
patch fixes it, the event terms should be parsed from the original
event.
This patch can work for the hybrid systems that have the same event
in more than 2 PMUs. It also can work in non-hybrid systems.
Before:
# perf stat -v -e UOPS_RETIRED.MS -a sleep 1
Using CPUID GenuineIntel-6-97-1
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
Control descriptor is not initialized
UOPS_RETIRED.MS: 2737845 16068518485 16068518485
Performance counter stats for 'system wide':
2,737,845 cpu_core/UOPS_RETIRED.MS/
1.002553850 seconds time elapsed
After:
# perf stat -v -e UOPS_RETIRED.MS -a sleep 1
Using CPUID GenuineIntel-6-97-1
UOPS_RETIRED.MS -> cpu_core/period=0x1e8483,umask=0x4,event=0xc2,frontend=0x8/
UOPS_RETIRED.MS -> cpu_atom/period=0x1e8483,umask=0x1,event=0xc2/
Control descriptor is not initialized
UOPS_RETIRED.MS: 1977555 16076950711 16076950711
UOPS_RETIRED.MS: 568684 8038694234 8038694234
Performance counter stats for 'system wide':
1,977,555 cpu_core/UOPS_RETIRED.MS/
568,684 cpu_atom/UOPS_RETIRED.MS/
1.004758259 seconds time elapsed
Fixes: fb0811535e ("perf parse-events: Allow config on kernel PMU events")
Reviewed-by: Kan Liang <kan.liang@linux.intel.com>
Signed-off-by: Zhengjun Xing <zhengjun.xing@linux.intel.com>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Alexander Shishkin <alexander.shishkin@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Ian Rogers <irogers@google.com>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: https://lore.kernel.org/r/20220307151627.30049-1-zhengjun.xing@linux.intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
d45476d983 ("x86/speculation: Rename RETPOLINE_AMD to RETPOLINE_LFENCE")
Its just a comment fixup.
This only causes these perf files to be rebuilt:
CC /tmp/build/perf/bench/mem-memcpy-x86-64-asm.o
CC /tmp/build/perf/bench/mem-memset-x86-64-asm.o
And addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/x86/include/asm/cpufeatures.h' differs from latest version at 'arch/x86/include/asm/cpufeatures.h'
diff -u tools/arch/x86/include/asm/cpufeatures.h arch/x86/include/asm/cpufeatures.h
Cc: Borislav Petkov <bp@suse.de>
Cc: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: https://lore.kernel.org/lkml/YiyiHatGaJQM7l/Y@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
To pick the changes from:
a5905d6af4 ("KVM: arm64: Allow SMCCC_ARCH_WORKAROUND_3 to be discovered and migrated")
That don't causes any changes in tooling (when built on x86), only
addresses this perf build warning:
Warning: Kernel ABI header at 'tools/arch/arm64/include/uapi/asm/kvm.h' differs from latest version at 'arch/arm64/include/uapi/asm/kvm.h'
diff -u tools/arch/arm64/include/uapi/asm/kvm.h arch/arm64/include/uapi/asm/kvm.h
Cc: James Morse <james.morse@arm.com>
Link: https://lore.kernel.org/lkml/YiyhAK6sVPc83FaI@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
When CONFIG_GENERIC_CPU_VULNERABILITIES is not set, references
to spectre_v2_update_state() cause a build error, so provide an
empty stub for that function when the Kconfig option is not set.
Fixes this build error:
arm-linux-gnueabi-ld: arch/arm/mm/proc-v7-bugs.o: in function `cpu_v7_bugs_init':
proc-v7-bugs.c:(.text+0x52): undefined reference to `spectre_v2_update_state'
arm-linux-gnueabi-ld: proc-v7-bugs.c:(.text+0x82): undefined reference to `spectre_v2_update_state'
Fixes: b9baf5c8c5 ("ARM: Spectre-BHB workaround")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: kernel test robot <lkp@intel.com>
Cc: Russell King <rmk+kernel@armlinux.org.uk>
Cc: Catalin Marinas <catalin.marinas@arm.com>
Cc: linux-arm-kernel@lists.infradead.org
Cc: patches@armlinux.org.uk
Acked-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull RISC-V fixes from Palmer Dabbelt:
- prevent users from enabling the alternatives framework (and thus
errata handling) on XIP kernels, where runtime code patching does not
function correctly.
- properly detect offset overflow for AUIPC-based relocations in
modules. This may manifest as modules calling arbitrary invalid
addresses, depending on the address allocated when a module is
loaded.
* tag 'riscv-for-linus-5.17-rc8' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
riscv: Fix auipc+jalr relocation range checks
riscv: alternative only works on !XIP_KERNEL
Pull powerpc fix from Michael Ellerman:
"Fix STACKTRACE=n build, in particular for skiroot_defconfig"
* tag 'powerpc-5.17-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix STACKTRACE=n build
When building for Thumb2, the vectors make use of a local label. Sadly,
the Spectre BHB code also uses a local label with the same number which
results in the Thumb2 reference pointing at the wrong place. Fix this
by changing the number used for the Spectre BHB local label.
Fixes: b9baf5c8c5 ("ARM: Spectre-BHB workaround")
Tested-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Russell King (Oracle) <rmk+kernel@armlinux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull MMC fixes from Ulf Hansson:
"MMC core:
- Restore (mostly) the busy polling for MMC_SEND_OP_COND
MMC host:
- meson-gx: Fix DMA usage of meson_mmc_post_req()"
* tag 'mmc-v5.17-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/mmc:
mmc: core: Restore (almost) the busy polling for MMC_SEND_OP_COND
mmc: meson: Fix usage of meson_mmc_post_req()
There is a limited amount of SGX memory (EPC) on each system. When that
memory is used up, SGX has its own swapping mechanism which is similar
in concept but totally separate from the core mm/* code. Instead of
swapping to disk, SGX swaps from EPC to normal RAM. That normal RAM
comes from a shared memory pseudo-file and can itself be swapped by the
core mm code. There is a hierarchy like this:
EPC <-> shmem <-> disk
After data is swapped back in from shmem to EPC, the shmem backing
storage needs to be freed. Currently, the backing shmem is not freed.
This effectively wastes the shmem while the enclave is running. The
memory is recovered when the enclave is destroyed and the backing
storage freed.
Sort this out by freeing memory with shmem_truncate_range(), as soon as
a page is faulted back to the EPC. In addition, free the memory for
PCMD pages as soon as all PCMD's in a page have been marked as unused
by zeroing its contents.
Cc: stable@vger.kernel.org
Fixes: 1728ab54b4 ("x86/sgx: Add a page reclaimer")
Reported-by: Dave Hansen <dave.hansen@linux.intel.com>
Signed-off-by: Jarkko Sakkinen <jarkko@kernel.org>
Signed-off-by: Dave Hansen <dave.hansen@linux.intel.com>
Link: https://lkml.kernel.org/r/20220303223859.273187-1-jarkko@kernel.org
Merge misc fixes from David Howells:
"A set of patches for watch_queue filter issues noted by Jann. I've
added in a cleanup patch from Christophe Jaillet to convert to using
formal bitmap specifiers for the note allocation bitmap.
Also two filesystem fixes (afs and cachefiles)"
* emailed patches from David Howells <dhowells@redhat.com>:
cachefiles: Fix volume coherency attribute
afs: Fix potential thrashing in afs writeback
watch_queue: Make comment about setting ->defunct more accurate
watch_queue: Fix lack of barrier/sync/lock between post and read
watch_queue: Free the alloc bitmap when the watch_queue is torn down
watch_queue: Fix the alloc bitmap size to reflect notes allocated
watch_queue: Use the bitmap API when applicable
watch_queue: Fix to always request a pow-of-2 pipe ring size
watch_queue: Fix to release page in ->release()
watch_queue, pipe: Free watchqueue state after clearing pipe ring
watch_queue: Fix filter limit check
A network filesystem may set coherency data on a volume cookie, and if
given, cachefiles will store this in an xattr on the directory in the
cache corresponding to the volume.
The function that sets the xattr just stores the contents of the volume
coherency buffer directly into the xattr, with nothing added; the
checking function, on the other hand, has a cut'n'paste error whereby it
tries to interpret the xattr contents as would be the xattr on an
ordinary file (using the cachefiles_xattr struct). This results in a
failure to match the coherency data because the buffer ends up being
shifted by 18 bytes.
Fix this by defining a structure specifically for the volume xattr and
making both the setting and checking functions use it.
Since the volume coherency doesn't work if used, take the opportunity to
insert a reserved field for future use, set it to 0 and check that it is
0. Log mismatch through the appropriate tracepoint.
Note that this only affects cifs; 9p, afs, ceph and nfs don't use the
volume coherency data at the moment.
Fixes: 32e150037d ("fscache, cachefiles: Store the volume coherency data")
Reported-by: Rohith Surabattula <rohiths.msft@gmail.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Reviewed-by: Jeff Layton <jlayton@kernel.org>
cc: Steve French <smfrench@gmail.com>
cc: linux-cifs@vger.kernel.org
cc: linux-cachefs@redhat.com
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
In afs_writepages_region(), if the dirty page we find is undergoing
writeback or write to cache, but the sync_mode is WB_SYNC_NONE, we go
round the loop trying the same page again and again with no pausing or
waiting unless and until another thread manages to clear the writeback
and fscache flags.
Fix this with three measures:
(1) Advance start to after the page we found.
(2) Break out of the loop and return if rescheduling is requested.
(3) Arbitrarily give up after a maximum of 5 skips.
Fixes: 31143d5d51 ("AFS: implement basic file write support")
Reported-by: Marc Dionne <marc.dionne@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Tested-by: Marc Dionne <marc.dionne@auristor.com>
Acked-by: Marc Dionne <marc.dionne@auristor.com>
Link: https://lore.kernel.org/r/164692725757.2097000.2060513769492301854.stgit@warthog.procyon.org.uk/ # v1
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
watch_queue_clear() has a comment stating that setting ->defunct to true
preventing new additions as well as preventing notifications. Whilst
the latter is true, the first bit is superfluous since at the time this
function is called, the pipe cannot be accessed to add new event
sources.
Remove the "new additions" bit from the comment.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
There's nothing to synchronise post_one_notification() versus
pipe_read(). Whilst posting is done under pipe->rd_wait.lock, the
reader only takes pipe->mutex which cannot bar notification posting as
that may need to be made from contexts that cannot sleep.
Fix this by setting pipe->head with a barrier in post_one_notification()
and reading pipe->head with a barrier in pipe_read().
If that's not sufficient, the rd_wait.lock will need to be taken,
possibly in a ->confirm() op so that it only applies to notifications.
The lock would, however, have to be dropped before copy_page_to_iter()
is invoked.
Fixes: c73be61ced ("pipe: Add general notification queue support")
Reported-by: Jann Horn <jannh@google.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
