The conversion to rhashtable introduced a hash table lock per lockspace,
in place of per bucket locks. To make this more scalable, switch to
using a rwlock for hash table access. The common case fast path uses
it as a read lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Currently the scand kthread acts like a garbage collection for expired
rsbs on toss list, to clean them up after a certain timeout. It triggers
every couple of seconds and iterates over the toss list while holding
ls_rsbtbl_lock for the whole hash bucket iteration.
To reduce the amount of time holding ls_rsbtbl_lock, we now handle the
disposal of expired rsbs using a per-lockspace timer that expires for the
earliest tossed rsb on the lockspace toss queue. This toss queue is
ordered according to the rsb res_toss_time with the earliest tossed rsb
as the first entry. The toss timer will only trylock() necessary locks,
since it is low priority garbage collection, and will rearm the timer
if trylock() fails. If the timer function does not find any expired
rsb's, it rearms the timer with the next earliest expired rsb.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
In the past we had problems when an rsb had a reference counter greater
than one while in the toss state. An rsb in the toss state is not
actively used for locking, and should not have any other references
apart from the single ref keeping it on the rsb hash. Shift to freeing
rsb's directly rather than using kref_put to free them, since the ref
counting is not meant to be used in this state. Add warnings if ref
counting is seen while an rsb is in the toss state.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace our own hash table with the more advanced rhashtable
for keeping rsb structs.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
To prepare for using rhashtable, add two rsb lists for iterating
through rsb's in two uncommon cases where this is necesssary:
- when dumping rsb state from debugfs, now using seq_list.
- when looking at all rsb's during recovery.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
There are several places where lock processing can perform two hash table
lookups, first in the "keep" list, and if not found, in the "toss" list.
This patch introduces a new rsb state flag "RSB_TOSS" to represent the
difference between the state of being on keep vs toss list, so that the
two lists can be combined. This avoids cases of two lookups.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Prepare to replace our own hash table with rhashtable by replacing
the per-bucket locks in our own hash table with a single lock.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Increment the ls_count value while dlm_scand is processing a
lockspace so that release_lockspace()/remove_lockspace() will
wait for dlm_scand to finish.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move dlm message processing from an ordered workqueue context to an
ordered softirq context. Handling dlm messages in softirq will allow
requests to be cleared more quickly and efficiently, and should avoid
longer queues of incomplete requests. Later patches are expected to
run completion/blocking callbacks directly from this message processing
context, further reducing context switches required to complete a request.
In the longer term, concurrent message processing could be implemented.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use spin_lock_bh for all spinlocks involved in message processing,
in preparation for softirq message processing. DLM lock requests
from user space involve dlm processing in user context, in addition
to the standard kernel context, necessitating bh variants.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove an explicit schedule() call in the message processing path,
in preparation for softirq message processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert ls_recv_active rw_semaphore to an rwlock to avoid
sleeping, in preparation for softirq message processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The end of the recovery process transitioned to normal message
processing by temporarily blocking the receiving context,
processing saved messages, then unblocking the receiving
context. To avoid blocking the receiving context, the old
wait_queue and mutex are replaced by a new rwlock and the new
RECV_MSG_BLOCKED flag. Received messages are added to the
list of saved messages, protected by the rwlock, until the
flag is cleared, which happens when all saved messages have
been processed.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert the rsb struct res_lock from a mutex to a spinlock
in preparation for processing messages in softirq context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Convert the waiters mutex to a spinlock in prepration for
processing messages in softirq context.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
The waiters_mutex no longer needs to be used in the waiters recovery
functions dlm_recover_waiters_pre() and dlm_recover_waiters_pre().
During recovery, ordinary locking operations are paused, and the
recovery thread is the only context accessing the waiters list,
so the lock is not needed.
Access to the waiters list from debugfs functions is avoided by
taking the top level recovery lock in the debugfs dump function.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add a new struct to save the current position in the rsb masters_list
while sending the rsb names to other nodes. The rsb names are sent in
multiple chunks, and for each new chunk, the new "dlm_dir_dump" struct
saves the last position in the masters_list. The new struct is also
used to save more information to sanity check the recovery process.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move the rsb root_list from the lockspace to a stack variable since
it is now only used by the ls_recover() function.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Add a new "masters_list" for master rsb structs, with a new
rwlock. The new list is created and used during the recovery
process to send the master rsb names to new nodes. With this
change, the current "root_list" can be used without locking.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Move dlm_create_root_list() and dlm_release_root_list() to
recover.c and declare them static because they are only used
there.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Replace GFP_NOFS with GFP_ATOMIC. Also stop using idr_preload which
uses a non-bh spin_lock. This is further preparation for softirq
message processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove the context parameter for message allocations and
always use GFP_ATOMIC. This prepares for softirq message
processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Acked-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Get rid of the unnecessary refcounting on callback structs.
Copy interesting callback info into the lkb struct rather
than maintaining pointers to callback structs from the lkb.
This goes back to the way things were done prior to
commit 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks").
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the following issue:
node 1 is dir
node 2 is master
node 3 is other
1->2: unlock
2: put final lkb, rsb moved to toss
2->1: unlock_reply
1: queue lkb callback with EUNLOCK
2->1: remove
1: receive_remove ignored (rsb on keep because of queued lkb callback)
1: complete lkb callback, put_lkb, move rsb to toss
3->1: lookup
1->3: lookup_reply master=2
3->2: request
2->3: request_reply EBADR
In summary:
An unexpected lkb reference causes the rsb to remain on the wrong list.
The rsb being on the wrong list causes receive_remove to be ignored.
An ignored receive_remove causes inconsistent dir and master state.
This sequence requires an unusually long delay in delivering the unlock
callback, because the remove message from 2->1 usually happens after
some seconds. So, it's not known exactly how frequently this sequence
occurs in pratice. It's possible that the same end result could also
have another unknown cause.
The solution for this issue is to further separate callback state
from the lkb, so that an lkb reference (and from that, an rsb ref)
are not held while a callback remains queued. Then, within the
unlock_reply, the lkb will be freed and the rsb moved to the toss
list. So, the receive_remove will not be ignored.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch combines the failure and default cases for enqueue and
dequeue a callback to the lkb callback queue that should end in both
cases as it should never happen.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Save lkb callback info when queueing the callback so that the
lkb struct is not needed in the callback workqueue processing.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Remove the ability to dump pending lkb callbacks from debugfs.
The prepares for separating lkb structs from callbacks.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Stop using lkb structs in the callback tracepoints so that lkb
references are not needed. This prepares for separating lkb
structs from callbacks.
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Use the new KMEM_CACHE() macro instead of direct kmem_cache_create
to simplify the creation of SLAB caches.
Signed-off-by: Kunwu Chan <chentao@kylinos.cn>
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
This patch fixes the copy lvb decision for user space lock requests.
Checking dlm_lvb_operations is done earlier, where granted/requested
lock modes are available to use in the matrix.
The decision had been moved to the wrong location, where granted mode
and requested mode where the same, which causes the dlm_lvb_operations
matix to produce the wrong copy decision. For PW or EX requests, the
caller could get invalid lvb data.
Fixes: 61bed0baa4 ("fs: dlm: use a non-static queue for callbacks")
Signed-off-by: Alexander Aring <aahringo@redhat.com>
Signed-off-by: David Teigland <teigland@redhat.com>
Pull Kbuild fixes from Masahiro Yamada:
- Deduplicate Kconfig entries for CONFIG_CXL_PMU
- Fix unselectable choice entry in MIPS Kconfig, and forbid this
structure
- Remove unused include/asm-generic/export.h
- Fix a NULL pointer dereference bug in modpost
- Enable -Woverride-init warning consistently with W=1
- Drop KCSAN flags from *.mod.c files
* tag 'kbuild-fixes-v6.9' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
kconfig: Fix typo HEIGTH to HEIGHT
Documentation/llvm: Note s390 LLVM=1 support with LLVM 18.1.0 and newer
kbuild: Disable KCSAN for autogenerated *.mod.c intermediaries
kbuild: make -Woverride-init warnings more consistent
modpost: do not make find_tosym() return NULL
export.h: remove include/asm-generic/export.h
kconfig: do not reparent the menu inside a choice block
MIPS: move unselectable FIT_IMAGE_FDT_EPM5 out of the "System type" choice
cxl: remove CONFIG_CXL_PMU entry in drivers/cxl/Kconfig
Pull EDAC fixes from Borislav Petkov:
- Fix more issues in the AMD FMPM driver
* tag 'edac_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS: Avoid build errors when CONFIG_DEBUG_FS=n
RAS/AMD/FMPM: Safely handle saved records of various sizes
RAS/AMD/FMPM: Avoid NULL ptr deref in get_saved_records()
Pull irq fixes from Borislav Petkov:
- Fix an unused function warning on irqchip/irq-armada-370-xp
- Fix the IRQ sharing with pinctrl-amd and ACPI OSL
* tag 'irq_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/armada-370-xp: Suppress unused-function warning
genirq: Introduce IRQF_COND_ONESHOT and use it in pinctrl-amd
Pull x86 perf fixes from Borislav Petkov:
- Define the correct set of default hw events on AMD Zen4
- Use the correct stalled cycles PMCs on AMD Zen2 and newer
- Fix detection of the LBR freeze feature on AMD
* tag 'perf_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
perf/x86/amd/core: Define a proper ref-cycles event for Zen 4 and later
perf/x86/amd/core: Update and fix stalled-cycles-* events for Zen 2 and later
perf/x86/amd/lbr: Use freeze based on availability
x86/cpufeatures: Add new word for scattered features
Pull timers update from Borislav Petkov:
- Volunteer in Anna-Maria and Frederic as timers co-maintainers so that
tglx can relax more :-P
* tag 'timers_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
MAINTAINERS: Add co-maintainers for time[rs]
Pull objtool fix from Borislav Petkov:
- Fix a format specifier build error in objtool during an x32 build
* tag 'objtool_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
objtool: Fix compile failure when using the x32 compiler
Pull x86 fixes from Borislav Petkov:
- Make sure single object builds in arch/x86/virt/ ala
make ... arch/x86/virt/vmx/tdx/seamcall.o
work again
- Do not do ROM range scans and memory validation when the kernel is
running as a SEV-SNP guest as those can get problematic and, before
that, are not really needed in such a guest
- Exclude the build-time generated vdso-image-x32.o object from objtool
validation and in particular the return sites in there due to a
warning which fires when an unpatched return thunk is being used
- Improve the NMI CPUs stall message to show additional information
about the state of each CPU wrt the NMI handler
- Enable gcc named address spaces support only on !KCSAN configs due to
compiler options incompatibility
- Revert a change which was trying to use GB pages for mapping regions
only when the regions would be large enough but that change lead to
kexec failing
- A documentation fixlet
* tag 'x86_urgent_for_v6.9_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/build: Use obj-y to descend into arch/x86/virt/
x86/sev: Skip ROM range scans and validation for SEV-SNP guests
x86/vdso: Fix rethunk patching for vdso-image-x32.o too
x86/nmi: Upgrade NMI backtrace stall checks & messages
x86/percpu: Disable named address spaces for KCSAN
Revert "x86/mm/ident_map: Use gbpages only where full GB page should be mapped."
Documentation/x86: Fix title underline length
Fixed a typo in some variables where height was misspelled as heigth.
Signed-off-by: Isak Ellmer <isak01@gmail.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
As of the first s390 pull request during the 6.9 merge window,
commit 691632f0e8 ("Merge tag 's390-6.9-1' of
git://git.kernel.org/pub/scm/linux/kernel/git/s390/linux"), s390 can be
built with LLVM=1 when using LLVM 18.1.0, which is the first version
that has SystemZ support implemented in ld.lld and llvm-objcopy.
Update the supported architectures table in the Kbuild LLVM
documentation to note this explicitly to make it more discoverable by
users and other developers. Additionally, this brings s390 in line with
the rest of the architectures in the table, which all support LLVM=1.
Signed-off-by: Nathan Chancellor <nathan@kernel.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When KCSAN and CONSTRUCTORS are enabled, one can trigger the
"Unpatched return thunk in use. This should not happen!"
catch-all warning.
Usually, when objtool runs on the .o objects, it does generate a section
.return_sites which contains all offsets in the objects to the return
thunks of the functions present there. Those return thunks then get
patched at runtime by the alternatives.
KCSAN and CONSTRUCTORS add this to the object file's .text.startup
section:
-------------------
Disassembly of section .text.startup:
...
0000000000000010 <_sub_I_00099_0>:
10: f3 0f 1e fa endbr64
14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9>
15: R_X86_64_PLT32 __tsan_init-0x4
19: e9 00 00 00 00 jmp 1e <__UNIQUE_ID___addressable_cryptd_alloc_aead349+0x6>
1a: R_X86_64_PLT32 __x86_return_thunk-0x4
-------------------
which, if it is built as a module goes through the intermediary stage of
creating a <module>.mod.c file which, when translated, receives a second
constructor:
-------------------
Disassembly of section .text.startup:
0000000000000010 <_sub_I_00099_0>:
10: f3 0f 1e fa endbr64
14: e8 00 00 00 00 call 19 <_sub_I_00099_0+0x9>
15: R_X86_64_PLT32 __tsan_init-0x4
19: e9 00 00 00 00 jmp 1e <_sub_I_00099_0+0xe>
1a: R_X86_64_PLT32 __x86_return_thunk-0x4
...
0000000000000030 <_sub_I_00099_0>:
30: f3 0f 1e fa endbr64
34: e8 00 00 00 00 call 39 <_sub_I_00099_0+0x9>
35: R_X86_64_PLT32 __tsan_init-0x4
39: e9 00 00 00 00 jmp 3e <__ksymtab_cryptd_alloc_ahash+0x2>
3a: R_X86_64_PLT32 __x86_return_thunk-0x4
-------------------
in the .ko file.
Objtool has run already so that second constructor's return thunk cannot
be added to the .return_sites section and thus the return thunk remains
unpatched and the warning rightfully fires.
Drop KCSAN flags from the mod.c generation stage as those constructors
do not contain data races one would be interested about.
Debugged together with David Kaplan <David.Kaplan@amd.com> and Nikolay
Borisov <nik.borisov@suse.com>.
Reported-by: Paul Menzel <pmenzel@molgen.mpg.de>
Closes: https://lore.kernel.org/r/0851a207-7143-417e-be31-8bf2b3afb57d@molgen.mpg.de
Signed-off-by: Borislav Petkov (AMD) <bp@alien8.de>
Tested-by: Paul Menzel <pmenzel@molgen.mpg.de> # Dell XPS 13
Reviewed-by: Nikolay Borisov <nik.borisov@suse.com>
Reviewed-by: Marco Elver <elver@google.com>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
The -Woverride-init warn about code that may be intentional or not,
but the inintentional ones tend to be real bugs, so there is a bit of
disagreement on whether this warning option should be enabled by default
and we have multiple settings in scripts/Makefile.extrawarn as well as
individual subsystems.
Older versions of clang only supported -Wno-initializer-overrides with
the same meaning as gcc's -Woverride-init, though all supported versions
now work with both. Because of this difference, an earlier cleanup of
mine accidentally turned the clang warning off for W=1 builds and only
left it on for W=2, while it's still enabled for gcc with W=1.
There is also one driver that only turns the warning off for newer
versions of gcc but not other compilers, and some but not all the
Makefiles still use a cc-disable-warning conditional that is no
longer needed with supported compilers here.
Address all of the above by removing the special cases for clang
and always turning the warning off unconditionally where it got
in the way, using the syntax that is supported by both compilers.
Fixes: 2cd3271b7a ("kbuild: avoid duplicate warning options")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Hamza Mahfooz <hamza.mahfooz@amd.com>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Andrew Jeffery <andrew@codeconstruct.com.au>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>
When compiling the v6.9-rc1 kernel with the x32 compiler, the following
errors are reported. The reason is that we take an "unsigned long"
variable and print it using "PRIx64" format string.
In file included from check.c:16:
check.c: In function ‘add_dead_ends’:
/usr/src/git/linux-2.6/tools/objtool/include/objtool/warn.h:46:17: error: format ‘%llx’ expects argument of type ‘long long unsigned int’, but argument 5 has type ‘long unsigned int’ [-Werror=format=]
46 | "%s: warning: objtool: " format "\n", \
| ^~~~~~~~~~~~~~~~~~~~~~~~
check.c:613:33: note: in expansion of macro ‘WARN’
613 | WARN("can't find unreachable insn at %s+0x%" PRIx64,
| ^~~~
...
Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: linux-kernel@vger.kernel.org
Pull xfs fixes from Chandan Babu:
- Allow stripe unit/width value passed via mount option to be written
over existing values in the super block
- Do not set current->journal_info to avoid its value from being miused
by another filesystem context
* tag 'xfs-6.9-fixes-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
xfs: don't use current->journal_info
xfs: allow sunit mount option to repair bad primary sb stripe values
Pull SCSI fixes and updates from James Bottomley:
"Fully half this pull is updates to lpfc and qla2xxx which got
committed just as the merge window opened. A sizeable fraction of the
driver updates are simple bug fixes (and lock reworks for bug fixes in
the case of lpfc), so rather than splitting the few actual
enhancements out, we're just adding the drivers to the -rc1 pull.
The enhancements for lpfc are log message removals, copyright updates
and three patches redefining types. For qla2xxx it's just removing a
debug message on module removal and the manufacturer detail update.
The two major fixes are the sg teardown race and a core error leg
problem with the procfs directory not being removed if we destroy a
created host that never got to the running state. The rest are minor
fixes and constifications"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi: (41 commits)
scsi: bnx2fc: Remove spin_lock_bh while releasing resources after upload
scsi: core: Fix unremoved procfs host directory regression
scsi: mpi3mr: Avoid memcpy field-spanning write WARNING
scsi: sd: Fix TCG OPAL unlock on system resume
scsi: sg: Avoid sg device teardown race
scsi: lpfc: Copyright updates for 14.4.0.1 patches
scsi: lpfc: Update lpfc version to 14.4.0.1
scsi: lpfc: Define types in a union for generic void *context3 ptr
scsi: lpfc: Define lpfc_dmabuf type for ctx_buf ptr
scsi: lpfc: Define lpfc_nodelist type for ctx_ndlp ptr
scsi: lpfc: Use a dedicated lock for ras_fwlog state
scsi: lpfc: Release hbalock before calling lpfc_worker_wake_up()
scsi: lpfc: Replace hbalock with ndlp lock in lpfc_nvme_unregister_port()
scsi: lpfc: Update lpfc_ramp_down_queue_handler() logic
scsi: lpfc: Remove IRQF_ONESHOT flag from threaded IRQ handling
scsi: lpfc: Move NPIV's transport unregistration to after resource clean up
scsi: lpfc: Remove unnecessary log message in queuecommand path
scsi: qla2xxx: Update version to 10.02.09.200-k
scsi: qla2xxx: Delay I/O Abort on PCI error
scsi: qla2xxx: Change debug message during driver unload
...
Pull i2c fix from Wolfram Sang:
"A fix from Andi for I2C host drivers"
* tag 'i2c-for-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: i801: Fix a refactoring that broke a touchpad on Lenovo P1
Pull USB fixes from Greg KH:
"Here are a bunch of small USB fixes for reported problems and
regressions for 6.9-rc2. Included in here are:
- deadlock fixes for long-suffering issues
- USB phy driver revert for reported problem
- typec fixes for reported problems
- duplicate id in dwc3 dropped
- dwc2 driver fixes
- udc driver warning fix
- cdc-wdm race bugfix
- other tiny USB bugfixes
All of these have been in linux-next this past week with no reported
issues"
* tag 'usb-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
USB: core: Fix deadlock in port "disable" sysfs attribute
USB: core: Add hub_get() and hub_put() routines
usb: typec: ucsi: Check capabilities before cable and identity discovery
usb: typec: ucsi: Clear UCSI_CCI_RESET_COMPLETE before reset
usb: typec: ucsi_acpi: Refactor and fix DELL quirk
usb: typec: ucsi: Ack unsupported commands
usb: typec: ucsi: Check for notifications after init
usb: typec: ucsi: Clear EVENT_PENDING under PPM lock
usb: typec: Return size of buffer if pd_set operation succeeds
usb: udc: remove warning when queue disabled ep
usb: dwc3: pci: Drop duplicate ID
usb: dwc3: Properly set system wakeup
Revert "usb: phy: generic: Get the vbus supply"
usb: cdc-wdm: close race between read and workqueue
usb: dwc2: gadget: LPM flow fix
usb: dwc2: gadget: Fix exiting from clock gating
usb: dwc2: host: Fix ISOC flow in DDMA mode
usb: dwc2: host: Fix remote wakeup from hibernation
usb: dwc2: host: Fix hibernation flow
USB: core: Fix deadlock in usb_deauthorize_interface()
...
Pull staging driver fixes from Greg KH:
"Here are two small staging driver fixes for the vc04_services driver
that resolve reported problems:
- strncpy fix for information leak
- another information leak discovered by the previous strncpy fix
Both of these have been in linux-next all this past week with no
reported issues"
* tag 'staging-6.9-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vc04_services: fix information leak in create_component()
staging: vc04_services: changen strncpy() to strscpy_pad()
One fix in the i801 driver where a bug caused touchpad
malfunctions on some Lenovo P1 models by incorrectly overwriting
a status variable during successful SMBUS transactions.
