mirror of
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git
synced 2026-05-04 16:24:29 -04:00
e85d3d55875f7a1079edfbc4e4e98d6f8aea9ac7
1171028 Commits
| Author | SHA1 | Message | Date | |
|---|---|---|---|---|
Joe Damato
|
e85d3d5587 |
ixgbe: Enable setting RSS table to default values
ethtool uses `ETHTOOL_GRXRINGS` to compute how many queues are supported
by RSS. The driver should return the smaller of either:
- The maximum number of RSS queues the device supports, OR
- The number of RX queues configured
Prior to this change, running `ethtool -X $iface default` fails if the
number of queues configured is larger than the number supported by RSS,
even though changing the queue count correctly resets the flowhash to
use all supported queues.
Other drivers (for example, i40e) will succeed but the flow hash will
reset to support the maximum number of queues supported by RSS, even if
that amount is smaller than the configured amount.
Prior to this change:
$ sudo ethtool -L eth1 combined 20
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 20 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
24: 8 9 10 11 12 13 14 15
32: 0 1 2 3 4 5 6 7
...
You can see that the flowhash was correctly set to use the maximum
number of queues supported by the driver (16).
However, asking the NIC to reset to "default" fails:
$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument
After this change, the flowhash can be reset to default which will use
all of the available RSS queues (16) or the configured queue count,
whichever is smaller.
Starting with eth1 which has 10 queues and a flowhash distributing to
all 10 queues:
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 0 1 2 3 4 5
16: 6 7 8 9 0 1 2 3
...
Increasing the queue count to 48 resets the flowhash to distribute to 16
queues, as it did before this patch:
$ sudo ethtool -L eth1 combined 48
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
...
Due to the other bugfix in this series, the flowhash can be set to use
queues 0-5:
$ sudo ethtool -X eth1 equal 5
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 0 1 2
8: 3 4 0 1 2 3 4 0
16: 1 2 3 4 0 1 2 3
...
Due to this bugfix, the flowhash can be reset to default and use 16
queues:
$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 16 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 10 11 12 13 14 15
16: 0 1 2 3 4 5 6 7
...
Fixes:
|
||
|
Joe Damato
|
4f3ed1293f |
ixgbe: Allow flow hash to be set via ethtool
ixgbe currently returns `EINVAL` whenever the flowhash it set by ethtool
because the ethtool code in the kernel passes a non-zero value for hfunc
that ixgbe should allow.
When ethtool is called with `ETHTOOL_SRXFHINDIR`,
`ethtool_set_rxfh_indir` will call ixgbe's set_rxfh function
with `ETH_RSS_HASH_NO_CHANGE`. This value should be accepted.
When ethtool is called with `ETHTOOL_SRSSH`, `ethtool_set_rxfh` will
call ixgbe's set_rxfh function with `rxfh.hfunc`, which appears to be
hardcoded in ixgbe to always be `ETH_RSS_HASH_TOP`. This value should
also be accepted.
Before this patch:
$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
Cannot set RX flow hash configuration: Invalid argument
After this patch:
$ sudo ethtool -L eth1 combined 10
$ sudo ethtool -X eth1 default
$ sudo ethtool -x eth1
RX flow hash indirection table for eth1 with 10 RX ring(s):
0: 0 1 2 3 4 5 6 7
8: 8 9 0 1 2 3 4 5
16: 6 7 8 9 0 1 2 3
24: 4 5 6 7 8 9 0 1
...
Fixes:
|
||
|
Vladimir Oltean
|
927cdea5d2 |
net: bridge: switchdev: don't notify FDB entries with "master dynamic"
There is a structural problem in switchdev, where the flag bits in
struct switchdev_notifier_fdb_info (added_by_user, is_local etc) only
represent a simplified / denatured view of what's in struct
net_bridge_fdb_entry :: flags (BR_FDB_ADDED_BY_USER, BR_FDB_LOCAL etc).
Each time we want to pass more information about struct
net_bridge_fdb_entry :: flags to struct switchdev_notifier_fdb_info
(here, BR_FDB_STATIC), we find that FDB entries were already notified to
switchdev with no regard to this flag, and thus, switchdev drivers had
no indication whether the notified entries were static or not.
For example, this command:
ip link add br0 type bridge && ip link set swp0 master br0
bridge fdb add dev swp0 00:01:02:03:04:05 master dynamic
has never worked as intended with switchdev. It causes a struct
net_bridge_fdb_entry to be passed to br_switchdev_fdb_notify() which has
a single flag set: BR_FDB_ADDED_BY_USER.
This is further passed to the switchdev notifier chain, where interested
drivers have no choice but to assume this is a static (does not age) and
sticky (does not migrate) FDB entry. So currently, all drivers offload
it to hardware as such, as can be seen below ("offload" is set).
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 offload master br0
The software FDB entry expires $ageing_time centiseconds after the
kernel last sees a packet with this MAC SA, and the bridge notifies its
deletion as well, so it eventually disappears from hardware too.
This is a problem, because it is actually desirable to start offloading
"master dynamic" FDB entries correctly - they should expire $ageing_time
centiseconds after the *hardware* port last sees a packet with this
MAC SA - and this is how the current incorrect behavior was discovered.
With an offloaded data plane, it can be expected that software only sees
exception path packets, so an otherwise active dynamic FDB entry would
be aged out by software sooner than it should.
With the change in place, these FDB entries are no longer offloaded:
bridge fdb get 00:01:02:03:04:05 dev swp0 master
00:01:02:03:04:05 dev swp0 master br0
and this also constitutes a better way (assuming a backport to stable
kernels) for user space to determine whether the kernel has the
capability of doing something sane with these or not.
As opposed to "master dynamic" FDB entries, on the current behavior of
which no one currently depends on (which can be deduced from the lack of
kselftests), Ido Schimmel explains that entries with the "extern_learn"
flag (BR_FDB_ADDED_BY_EXT_LEARN) should still be notified to switchdev,
since the spectrum driver listens to them (and this is kind of okay,
because although they are treated identically to "static", they are
expected to not age, and to roam).
Fixes:
|
||
|
Jakub Kicinski
|
f52cc627b8 |
Revert "net/mlx5: Enable management PF initialization"
This reverts commit |
||
|
Jakub Kicinski
|
9d94769081 |
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== bpf 2023-04-19 We've added 3 non-merge commits during the last 6 day(s) which contain a total of 3 files changed, 34 insertions(+), 9 deletions(-). The main changes are: 1) Fix a crash on s390's bpf_arch_text_poke() under a NULL new_addr, from Ilya Leoshkevich. 2) Fix a bug in BPF verifier's precision tracker, from Daniel Borkmann and Andrii Nakryiko. 3) Fix a regression in veth's xdp_features which led to a broken BPF CI selftest, from Lorenzo Bianconi. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: bpf: Fix incorrect verifier pruning due to missing register precision taints veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL ==================== Link: https://lore.kernel.org/r/20230419195847.27060-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Mat Martineau
|
52b37ae8aa |
MAINTAINERS: Resume MPTCP co-maintainer role
I'm returning to the MPTCP maintainer role I held for most of the subsytem's history. This time I'm using my kernel.org email address. Acked-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/mptcp/af85e467-8d0a-4eba-b5f8-e2f2c5d24984@tessares.net/ Signed-off-by: Mat Martineau <martineau@kernel.org> Link: https://lore.kernel.org/r/20230418231318.115331-1-martineau@kernel.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Matthieu Baerts
|
7b3aba7ea3 |
mailmap: add entries for Mat Martineau
Map Mat's old corporate addresses to his kernel.org one. Reviewed-by: Mat Martineau <martineau@kernel.org> Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> Link: https://lore.kernel.org/r/20230418-upstream-net-20230418-mailmap-mat-v1-1-13ca5dc83037@tessares.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Jakub Kicinski
|
7b97174d0e |
Merge branch '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue
Tony Nguyen says: ==================== Intel Wired LAN Driver Updates 2023-04-17 (i40e) This series contains updates to i40e only. Alex moves setting of active filters to occur under lock and checks/takes error path in rebuild if re-initializing the misc interrupt vector failed. * '40GbE' of git://git.kernel.org/pub/scm/linux/kernel/git/tnguy/net-queue: i40e: fix i40e_setup_misc_vector() error handling i40e: fix accessing vsi->active_filters without holding lock ==================== Reviewed-by: Simon Horman <simon.horman@corigine.com> Link: https://lore.kernel.org/r/20230417205245.1030733-1-anthony.l.nguyen@intel.com Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Sebastian Basierski
|
67d47b9511 |
e1000e: Disable TSO on i219-LM card to increase speed
While using i219-LM card currently it was only possible to achieve about 60% of maximum speed due to regression introduced in Linux 5.8. This was caused by TSO not being disabled by default despite commit |
||
|
Vadim Fedorenko
|
8c154d272c |
bnxt_en: fix free-runnig PHC mode
The patch in fixes changed the way real-time mode is chosen for PHC on
the NIC. Apparently there is one more use case of the check outside of
ptp part of the driver which was not converted to the new macro and is
making a lot of noise in free-running mode.
Fixes:
|
||
|
Christophe JAILLET
|
3d2f8f1f18 |
net: dsa: microchip: ksz8795: Correctly handle huge frame configuration
Because of the logic in place, SW_HUGE_PACKET can never be set.
(If the first condition is true, then the 2nd one is also true, but is not
executed)
Change the logic and update each bit individually.
Fixes:
|
||
|
Daniel Borkmann
|
71b547f561 |
bpf: Fix incorrect verifier pruning due to missing register precision taints
Juan Jose et al reported an issue found via fuzzing where the verifier's
pruning logic prematurely marks a program path as safe.
Consider the following program:
0: (b7) r6 = 1024
1: (b7) r7 = 0
2: (b7) r8 = 0
3: (b7) r9 = -2147483648
4: (97) r6 %= 1025
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2
7: (97) r6 %= 1
8: (b7) r9 = 0
9: (bd) if r6 <= r9 goto pc+1
10: (b7) r6 = 0
11: (b7) r0 = 0
12: (63) *(u32 *)(r10 -4) = r0
13: (18) r4 = 0xffff888103693400 // map_ptr(ks=4,vs=48)
15: (bf) r1 = r4
16: (bf) r2 = r10
17: (07) r2 += -4
18: (85) call bpf_map_lookup_elem#1
19: (55) if r0 != 0x0 goto pc+1
20: (95) exit
21: (77) r6 >>= 10
22: (27) r6 *= 8192
23: (bf) r1 = r0
24: (0f) r0 += r6
25: (79) r3 = *(u64 *)(r0 +0)
26: (7b) *(u64 *)(r1 +0) = r3
27: (95) exit
The verifier treats this as safe, leading to oob read/write access due
to an incorrect verifier conclusion:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r6 = 1024 ; R6_w=1024
1: (b7) r7 = 0 ; R7_w=0
2: (b7) r8 = 0 ; R8_w=0
3: (b7) r9 = -2147483648 ; R9_w=-2147483648
4: (97) r6 %= 1025 ; R6_w=scalar()
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff00000000; 0xffffffff)) R9_w=-2147483648
7: (97) r6 %= 1 ; R6_w=scalar()
8: (b7) r9 = 0 ; R9=0
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
10: (b7) r6 = 0 ; R6_w=0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 9
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=0
22: (27) r6 *= 8192 ; R6_w=0
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 19
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
last_idx 18 first_idx 9
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
regs=40 stack=0 before 10: (b7) r6 = 0
25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
27: (95) exit
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff8ad3886c2a00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1
frame 0: propagating r6
last_idx 19 first_idx 11
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff8ad3886c2a00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
last_idx 9 first_idx 9
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=0 R10=fp0
last_idx 8 first_idx 0
regs=40 stack=0 before 8: (b7) r9 = 0
regs=40 stack=0 before 7: (97) r6 %= 1
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=40 stack=0 before 5: (05) goto pc+0
regs=40 stack=0 before 4: (97) r6 %= 1025
regs=40 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
19: safe
frame 0: propagating r6
last_idx 9 first_idx 0
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=40 stack=0 before 5: (05) goto pc+0
regs=40 stack=0 before 4: (97) r6 %= 1025
regs=40 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
from 6 to 9: safe
verification time 110 usec
stack depth 4
processed 36 insns (limit 1000000) max_states_per_insn 0 total_states 3 peak_states 3 mark_read 2
The verifier considers this program as safe by mistakenly pruning unsafe
code paths. In the above func#0, code lines 0-10 are of interest. In line
0-3 registers r6 to r9 are initialized with known scalar values. In line 4
the register r6 is reset to an unknown scalar given the verifier does not
track modulo operations. Due to this, the verifier can also not determine
precisely which branches in line 6 and 9 are taken, therefore it needs to
explore them both.
As can be seen, the verifier starts with exploring the false/fall-through
paths first. The 'from 19 to 21' path has both r6=0 and r9=0 and the pointer
arithmetic on r0 += r6 is therefore considered safe. Given the arithmetic,
r6 is correctly marked for precision tracking where backtracking kicks in
where it walks back the current path all the way where r6 was set to 0 in
the fall-through branch.
Next, the pruning logics pops the path 'from 9 to 11' from the stack. Also
here, the state of the registers is the same, that is, r6=0 and r9=0, so
that at line 19 the path can be pruned as it is considered safe. It is
interesting to note that the conditional in line 9 turned r6 into a more
precise state, that is, in the fall-through path at the beginning of line
10, it is R6=scalar(umin=1), and in the branch-taken path (which is analyzed
here) at the beginning of line 11, r6 turned into a known const r6=0 as
r9=0 prior to that and therefore (unsigned) r6 <= 0 concludes that r6 must
be 0 (**):
[...] ; R6_w=scalar()
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
[...]
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
[...]
The next path is 'from 6 to 9'. The verifier considers the old and current
state equivalent, and therefore prunes the search incorrectly. Looking into
the two states which are being compared by the pruning logic at line 9, the
old state consists of R6_rwD=Pscalar() R9_rwD=0 R10=fp0 and the new state
consists of R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968)
R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0. While r6 had the reg->precise flag
correctly set in the old state, r9 did not. Both r6'es are considered as
equivalent given the old one is a superset of the current, more precise one,
however, r9's actual values (0 vs 0x80000000) mismatch. Given the old r9
did not have reg->precise flag set, the verifier does not consider the
register as contributing to the precision state of r6, and therefore it
considered both r9 states as equivalent. However, for this specific pruned
path (which is also the actual path taken at runtime), register r6 will be
0x400 and r9 0x80000000 when reaching line 21, thus oob-accessing the map.
The purpose of precision tracking is to initially mark registers (including
spilled ones) as imprecise to help verifier's pruning logic finding equivalent
states it can then prune if they don't contribute to the program's safety
aspects. For example, if registers are used for pointer arithmetic or to pass
constant length to a helper, then the verifier sets reg->precise flag and
backtracks the BPF program instruction sequence and chain of verifier states
to ensure that the given register or stack slot including their dependencies
are marked as precisely tracked scalar. This also includes any other registers
and slots that contribute to a tracked state of given registers/stack slot.
This backtracking relies on recorded jmp_history and is able to traverse
entire chain of parent states. This process ends only when all the necessary
registers/slots and their transitive dependencies are marked as precise.
The backtrack_insn() is called from the current instruction up to the first
instruction, and its purpose is to compute a bitmask of registers and stack
slots that need precision tracking in the parent's verifier state. For example,
if a current instruction is r6 = r7, then r6 needs precision after this
instruction and r7 needs precision before this instruction, that is, in the
parent state. Hence for the latter r7 is marked and r6 unmarked.
For the class of jmp/jmp32 instructions, backtrack_insn() today only looks
at call and exit instructions and for all other conditionals the masks
remain as-is. However, in the given situation register r6 has a dependency
on r9 (as described above in **), so also that one needs to be marked for
precision tracking. In other words, if an imprecise register influences a
precise one, then the imprecise register should also be marked precise.
Meaning, in the parent state both dest and src register need to be tracked
for precision and therefore the marking must be more conservative by setting
reg->precise flag for both. The precision propagation needs to cover both
for the conditional: if the src reg was marked but not the dst reg and vice
versa.
After the fix the program is correctly rejected:
func#0 @0
0: R1=ctx(off=0,imm=0) R10=fp0
0: (b7) r6 = 1024 ; R6_w=1024
1: (b7) r7 = 0 ; R7_w=0
2: (b7) r8 = 0 ; R8_w=0
3: (b7) r9 = -2147483648 ; R9_w=-2147483648
4: (97) r6 %= 1025 ; R6_w=scalar()
5: (05) goto pc+0
6: (bd) if r6 <= r9 goto pc+2 ; R6_w=scalar(umin=18446744071562067969,var_off=(0xffffffff80000000; 0x7fffffff),u32_min=-2147483648) R9_w=-2147483648
7: (97) r6 %= 1 ; R6_w=scalar()
8: (b7) r9 = 0 ; R9=0
9: (bd) if r6 <= r9 goto pc+1 ; R6=scalar(umin=1) R9=0
10: (b7) r6 = 0 ; R6_w=0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 9
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=0
22: (27) r6 *= 8192 ; R6_w=0
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 19
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
parent didn't have regs=40 stack=0 marks: R0_rw=map_value_or_null(id=1,off=0,ks=4,vs=48,imm=0) R6_rw=P0 R7=0 R8=0 R9=0 R10=fp0 fp-8=mmmm????
last_idx 18 first_idx 9
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
regs=40 stack=0 before 10: (b7) r6 = 0
25: (79) r3 = *(u64 *)(r0 +0) ; R0_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
26: (7b) *(u64 *)(r1 +0) = r3 ; R1_w=map_value(off=0,ks=4,vs=48,imm=0) R3_w=scalar()
27: (95) exit
from 9 to 11: R1=ctx(off=0,imm=0) R6=0 R7=0 R8=0 R9=0 R10=fp0
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1
frame 0: propagating r6
last_idx 19 first_idx 11
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_r=P0 R7=0 R8=0 R9=0 R10=fp0
last_idx 9 first_idx 9
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
parent didn't have regs=240 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar() R7_w=0 R8_w=0 R9_rw=P0 R10=fp0
last_idx 8 first_idx 0
regs=240 stack=0 before 8: (b7) r9 = 0
regs=40 stack=0 before 7: (97) r6 %= 1
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
19: safe
from 6 to 9: R1=ctx(off=0,imm=0) R6_w=scalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
9: (bd) if r6 <= r9 goto pc+1
last_idx 9 first_idx 0
regs=40 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
last_idx 9 first_idx 0
regs=200 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
11: R6=scalar(umax=18446744071562067968) R9=-2147483648
11: (b7) r0 = 0 ; R0_w=0
12: (63) *(u32 *)(r10 -4) = r0
last_idx 12 first_idx 11
regs=1 stack=0 before 11: (b7) r0 = 0
13: R0_w=0 R10=fp0 fp-8=0000????
13: (18) r4 = 0xffff9290dc5bfe00 ; R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
15: (bf) r1 = r4 ; R1_w=map_ptr(off=0,ks=4,vs=48,imm=0) R4_w=map_ptr(off=0,ks=4,vs=48,imm=0)
16: (bf) r2 = r10 ; R2_w=fp0 R10=fp0
17: (07) r2 += -4 ; R2_w=fp-4
18: (85) call bpf_map_lookup_elem#1 ; R0_w=map_value_or_null(id=3,off=0,ks=4,vs=48,imm=0)
19: (55) if r0 != 0x0 goto pc+1 ; R0_w=0
20: (95) exit
from 19 to 21: R0=map_value(off=0,ks=4,vs=48,imm=0) R6=scalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
21: (77) r6 >>= 10 ; R6_w=scalar(umax=18014398507384832,var_off=(0x0; 0x3fffffffffffff))
22: (27) r6 *= 8192 ; R6_w=scalar(smax=9223372036854767616,umax=18446744073709543424,var_off=(0x0; 0xffffffffffffe000),s32_max=2147475456,u32_max=-8192)
23: (bf) r1 = r0 ; R0=map_value(off=0,ks=4,vs=48,imm=0) R1_w=map_value(off=0,ks=4,vs=48,imm=0)
24: (0f) r0 += r6
last_idx 24 first_idx 21
regs=40 stack=0 before 23: (bf) r1 = r0
regs=40 stack=0 before 22: (27) r6 *= 8192
regs=40 stack=0 before 21: (77) r6 >>= 10
parent didn't have regs=40 stack=0 marks: R0_rw=map_value(off=0,ks=4,vs=48,imm=0) R6_r=Pscalar(umax=18446744071562067968) R7=0 R8=0 R9=-2147483648 R10=fp0 fp-8=mmmm????
last_idx 19 first_idx 11
regs=40 stack=0 before 19: (55) if r0 != 0x0 goto pc+1
regs=40 stack=0 before 18: (85) call bpf_map_lookup_elem#1
regs=40 stack=0 before 17: (07) r2 += -4
regs=40 stack=0 before 16: (bf) r2 = r10
regs=40 stack=0 before 15: (bf) r1 = r4
regs=40 stack=0 before 13: (18) r4 = 0xffff9290dc5bfe00
regs=40 stack=0 before 12: (63) *(u32 *)(r10 -4) = r0
regs=40 stack=0 before 11: (b7) r0 = 0
parent didn't have regs=40 stack=0 marks: R1=ctx(off=0,imm=0) R6_rw=Pscalar(umax=18446744071562067968) R7_w=0 R8_w=0 R9_w=-2147483648 R10=fp0
last_idx 9 first_idx 0
regs=40 stack=0 before 9: (bd) if r6 <= r9 goto pc+1
regs=240 stack=0 before 6: (bd) if r6 <= r9 goto pc+2
regs=240 stack=0 before 5: (05) goto pc+0
regs=240 stack=0 before 4: (97) r6 %= 1025
regs=240 stack=0 before 3: (b7) r9 = -2147483648
regs=40 stack=0 before 2: (b7) r8 = 0
regs=40 stack=0 before 1: (b7) r7 = 0
regs=40 stack=0 before 0: (b7) r6 = 1024
math between map_value pointer and register with unbounded min value is not allowed
verification time 886 usec
stack depth 4
processed 49 insns (limit 1000000) max_states_per_insn 1 total_states 5 peak_states 5 mark_read 2
Fixes:
|
||
|
Arnd Bergmann
|
fcd4843a19 |
hamradio: drop ISA_DMA_API dependency
It looks like the dependency got added accidentally in commit
|
||
|
Ido Schimmel
|
1f64757ee2 |
mlxsw: pci: Fix possible crash during initialization
During initialization the driver issues a reset command via its command
interface in order to remove previous configuration from the device.
After issuing the reset, the driver waits for 200ms before polling on
the "system_status" register using memory-mapped IO until the device
reaches a ready state (0x5E). The wait is necessary because the reset
command only triggers the reset, but the reset itself happens
asynchronously. If the driver starts polling too soon, the read of the
"system_status" register will never return and the system will crash
[1].
The issue was discovered when the device was flashed with a development
firmware version where the reset routine took longer to complete. The
issue was fixed in the firmware, but it exposed the fact that the
current wait time is borderline.
Fix by increasing the wait time from 200ms to 400ms. With this patch and
the buggy firmware version, the issue did not reproduce in 10 reboots
whereas without the patch the issue is reproduced quite consistently.
[1]
mce: CPUs not responding to MCE broadcast (may include false positives): 0,4
mce: CPUs not responding to MCE broadcast (may include false positives): 0,4
Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler
Shutting down cpus with NMI
Kernel Offset: 0x12000000 from 0xffffffff81000000 (relocation range: 0xffffffff80000000-0xffffffffbfffffff)
Fixes:
|
||
|
David S. Miller
|
ed7f9c01e2 |
Merge branch 'mptcp-fixes'
Matthieu Baerts says: ==================== mptcp: fixes around listening sockets and the MPTCP worker Christoph Paasch reported a couple of issues found by syzkaller and linked to operations done by the MPTCP worker on (un)accepted sockets. Fixing these issues was not obvious and rather complex but Paolo Abeni nicely managed to propose these excellent patches that seem to satisfy syzkaller. Patch 1 partially reverts a recent fix but while still providing a solution for the previous issue, it also prevents the MPTCP worker from running concurrently with inet_csk_listen_stop(). A warning is then avoided. The partially reverted patch has been introduced in v6.3-rc3, backported up to v6.1 and fixing an issue visible from v5.18. Patch 2 prevents the MPTCP worker to race with mptcp_accept() causing a UaF when a fallback to TCP is done while in parallel, the socket is being accepted by the userspace. This is also a fix of a previous fix introduced in v6.3-rc3, backported up to v6.1 but here fixing an issue that is in theory there from v5.7. There is no need to backport it up to here as it looks like it is only visible later, around v5.18, see the previous cover-letter linked to this original fix. ==================== Signed-off-by: Matthieu Baerts <matthieu.baerts@tessares.net> |
||
|
Paolo Abeni
|
63740448a3 |
mptcp: fix accept vs worker race
The mptcp worker and mptcp_accept() can race, as reported by Christoph:
refcount_t: addition on 0; use-after-free.
WARNING: CPU: 1 PID: 14351 at lib/refcount.c:25 refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25
Modules linked in:
CPU: 1 PID: 14351 Comm: syz-executor.2 Not tainted 6.3.0-rc1-gde5e8fd0123c #11
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:refcount_warn_saturate+0x105/0x1b0 lib/refcount.c:25
Code: 02 31 ff 89 de e8 1b f0 a7 ff 84 db 0f 85 6e ff ff ff e8 3e f5 a7 ff 48 c7 c7 d8 c7 34 83 c6 05 6d 2d 0f 02 01 e8 cb 3d 90 ff <0f> 0b e9 4f ff ff ff e8 1f f5 a7 ff 0f b6 1d 54 2d 0f 02 31 ff 89
RSP: 0018:ffffc90000a47bf8 EFLAGS: 00010282
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: ffff88802eae98c0 RSI: ffffffff81097d4f RDI: 0000000000000001
RBP: ffff88802e712180 R08: 0000000000000001 R09: 0000000000000000
R10: 0000000000000001 R11: ffff88802eaea148 R12: ffff88802e712100
R13: ffff88802e712a88 R14: ffff888005cb93a8 R15: ffff88802e712a88
FS: 0000000000000000(0000) GS:ffff88803ed00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f277fd89120 CR3: 0000000035486002 CR4: 0000000000370ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
Call Trace:
<TASK>
__refcount_add include/linux/refcount.h:199 [inline]
__refcount_inc include/linux/refcount.h:250 [inline]
refcount_inc include/linux/refcount.h:267 [inline]
sock_hold include/net/sock.h:775 [inline]
__mptcp_close+0x4c6/0x4d0 net/mptcp/protocol.c:3051
mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072
inet_release+0x56/0xa0 net/ipv4/af_inet.c:429
__sock_release+0x51/0xf0 net/socket.c:653
sock_close+0x18/0x20 net/socket.c:1395
__fput+0x113/0x430 fs/file_table.c:321
task_work_run+0x96/0x100 kernel/task_work.c:179
exit_task_work include/linux/task_work.h:38 [inline]
do_exit+0x4fc/0x10c0 kernel/exit.c:869
do_group_exit+0x51/0xf0 kernel/exit.c:1019
get_signal+0x12b0/0x1390 kernel/signal.c:2859
arch_do_signal_or_restart+0x25/0x260 arch/x86/kernel/signal.c:306
exit_to_user_mode_loop kernel/entry/common.c:168 [inline]
exit_to_user_mode_prepare+0x131/0x1a0 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x19/0x40 kernel/entry/common.c:296
do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7fec4b4926a9
Code: Unable to access opcode bytes at 0x7fec4b49267f.
RSP: 002b:00007fec49f9dd78 EFLAGS: 00000246 ORIG_RAX: 00000000000000ca
RAX: fffffffffffffe00 RBX: 00000000006bc058 RCX: 00007fec4b4926a9
RDX: 0000000000000000 RSI: 0000000000000080 RDI: 00000000006bc058
RBP: 00000000006bc050 R08: 00000000007df998 R09: 00000000007df998
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 000000000000000b R15: 000000000001fe40
</TASK>
The root cause is that the worker can force fallback to TCP the first
mptcp subflow, actually deleting the unaccepted msk socket.
We can explicitly prevent the race delaying the unaccepted msk deletion
at listener shutdown time. In case the closed subflow is later accepted,
just drop the mptcp context and let the user-space deal with the
paired mptcp socket.
Fixes:
|
||
|
Paolo Abeni
|
2a6a870e44 |
mptcp: stops worker on unaccepted sockets at listener close
This is a partial revert of the blamed commit, with a relevant
change: mptcp_subflow_queue_clean() now just change the msk
socket status and stop the worker, so that the UaF issue addressed
by the blamed commit is not re-introduced.
The above prevents the mptcp worker from running concurrently with
inet_csk_listen_stop(), as such race would trigger a warning, as
reported by Christoph:
RSP: 002b:00007f784fe09cd8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
WARNING: CPU: 0 PID: 25807 at net/ipv4/inet_connection_sock.c:1387 inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387
RAX: ffffffffffffffda RBX: 00000000006bc050 RCX: 00007f7850afd6a9
RDX: 0000000000000000 RSI: 0000000020000340 RDI: 0000000000000004
Modules linked in:
RBP: 0000000000000002 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000006bc05c
R13: fffffffffffffea8 R14: 00000000006bc050 R15: 000000000001fe40
</TASK>
CPU: 0 PID: 25807 Comm: syz-executor.7 Not tainted 6.2.0-g778e54711659 #7
Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.11.0-2.el7 04/01/2014
RIP: 0010:inet_csk_listen_stop+0x664/0x870 net/ipv4/inet_connection_sock.c:1387
RAX: 0000000000000000 RBX: ffff888100dfbd40 RCX: 0000000000000000
RDX: ffff8881363aab80 RSI: ffffffff81c494f4 RDI: 0000000000000005
RBP: ffff888126dad080 R08: 0000000000000005 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000000 R12: ffff888100dfe040
R13: 0000000000000001 R14: 0000000000000000 R15: ffff888100dfbdd8
FS: 00007f7850a2c800(0000) GS:ffff88813bc00000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000001b32d26000 CR3: 000000012fdd8006 CR4: 0000000000770ef0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
<TASK>
__tcp_close+0x5b2/0x620 net/ipv4/tcp.c:2875
__mptcp_close_ssk+0x145/0x3d0 net/mptcp/protocol.c:2427
mptcp_destroy_common+0x8a/0x1c0 net/mptcp/protocol.c:3277
mptcp_destroy+0x41/0x60 net/mptcp/protocol.c:3304
__mptcp_destroy_sock+0x56/0x140 net/mptcp/protocol.c:2965
__mptcp_close+0x38f/0x4a0 net/mptcp/protocol.c:3057
mptcp_close+0x24/0xe0 net/mptcp/protocol.c:3072
inet_release+0x53/0xa0 net/ipv4/af_inet.c:429
__sock_release+0x4e/0xf0 net/socket.c:651
sock_close+0x15/0x20 net/socket.c:1393
__fput+0xff/0x420 fs/file_table.c:321
task_work_run+0x8b/0xe0 kernel/task_work.c:179
resume_user_mode_work include/linux/resume_user_mode.h:49 [inline]
exit_to_user_mode_loop kernel/entry/common.c:171 [inline]
exit_to_user_mode_prepare+0x113/0x120 kernel/entry/common.c:203
__syscall_exit_to_user_mode_work kernel/entry/common.c:285 [inline]
syscall_exit_to_user_mode+0x1d/0x40 kernel/entry/common.c:296
do_syscall_64+0x46/0x90 arch/x86/entry/common.c:86
entry_SYSCALL_64_after_hwframe+0x72/0xdc
RIP: 0033:0x7f7850af70dc
RAX: 0000000000000000 RBX: 0000000000000004 RCX: 00007f7850af70dc
RDX: 00007f7850a2c800 RSI: 0000000000000002 RDI: 0000000000000003
RBP: 00000000006bd980 R08: 0000000000000000 R09: 00000000000018a0
R10: 00000000316338a4 R11: 0000000000000293 R12: 0000000000211e31
R13: 00000000006bc05c R14: 00007f785062c000 R15: 0000000000211af0
Fixes:
|
||
|
Alexander Aring
|
4e006c7a6d |
net: rpl: fix rpl header size calculation
This patch fixes a missing 8 byte for the header size calculation. The
ipv6_rpl_srh_size() is used to check a skb_pull() on skb->data which
points to skb_transport_header(). Currently we only check on the
calculated addresses fields using CmprI and CmprE fields, see:
https://www.rfc-editor.org/rfc/rfc6554#section-3
there is however a missing 8 byte inside the calculation which stands
for the fields before the addresses field. Those 8 bytes are represented
by sizeof(struct ipv6_rpl_sr_hdr) expression.
Fixes:
|
||
|
Seiji Nishikawa
|
6f4833383e |
net: vmxnet3: Fix NULL pointer dereference in vmxnet3_rq_rx_complete()
When vmxnet3_rq_create() fails to allocate rq->data_ring.base due to page allocation failure, subsequent call to vmxnet3_rq_rx_complete() can result in NULL pointer dereference. To fix this bug, check not only that rxDataRingUsed is true but also that adapter->rxdataring_enabled is true before calling memcpy() in vmxnet3_rq_rx_complete(). [1728352.477993] ethtool: page allocation failure: order:9, mode:0x6000c0(GFP_KERNEL), nodemask=(null),cpuset=/,mems_allowed=0 ... [1728352.478009] Call Trace: [1728352.478028] dump_stack+0x41/0x60 [1728352.478035] warn_alloc.cold.120+0x7b/0x11b [1728352.478038] ? _cond_resched+0x15/0x30 [1728352.478042] ? __alloc_pages_direct_compact+0x15f/0x170 [1728352.478043] __alloc_pages_slowpath+0xcd3/0xd10 [1728352.478047] __alloc_pages_nodemask+0x2e2/0x320 [1728352.478049] __dma_direct_alloc_pages.constprop.25+0x8a/0x120 [1728352.478053] dma_direct_alloc+0x5a/0x2a0 [1728352.478056] vmxnet3_rq_create.part.57+0x17c/0x1f0 [vmxnet3] ... [1728352.478188] vmxnet3 0000:0b:00.0 ens192: rx data ring will be disabled ... [1728352.515347] BUG: unable to handle kernel NULL pointer dereference at 0000000000000034 ... [1728352.515440] RIP: 0010:memcpy_orig+0x54/0x130 ... [1728352.515655] Call Trace: [1728352.515665] <IRQ> [1728352.515672] vmxnet3_rq_rx_complete+0x419/0xef0 [vmxnet3] [1728352.515690] vmxnet3_poll_rx_only+0x31/0xa0 [vmxnet3] ... Signed-off-by: Seiji Nishikawa <snishika@redhat.com> Signed-off-by: David S. Miller <davem@davemloft.net> |
||
|
Ido Schimmel
|
c484fcc058 |
bonding: Fix memory leak when changing bond type to Ethernet
When a net device is put administratively up, its 'IFF_UP' flag is set
(if not set already) and a 'NETDEV_UP' notification is emitted, which
causes the 8021q driver to add VLAN ID 0 on the device. The reverse
happens when a net device is put administratively down.
When changing the type of a bond to Ethernet, its 'IFF_UP' flag is
incorrectly cleared, resulting in the kernel skipping the above process
and VLAN ID 0 being leaked [1].
Fix by restoring the flag when changing the type to Ethernet, in a
similar fashion to the restoration of the 'IFF_SLAVE' flag.
The issue can be reproduced using the script in [2], with example out
before and after the fix in [3].
[1]
unreferenced object 0xffff888103479900 (size 256):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
00 a0 0c 15 81 88 ff ff 00 00 00 00 00 00 00 00 ................
00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff8406426c>] vlan_vid_add+0x30c/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
unreferenced object 0xffff88810f6a83e0 (size 32):
comm "ip", pid 329, jiffies 4294775225 (age 28.561s)
hex dump (first 32 bytes):
a0 99 47 03 81 88 ff ff a0 99 47 03 81 88 ff ff ..G.......G.....
81 00 00 00 01 00 00 00 cc cc cc cc cc cc cc cc ................
backtrace:
[<ffffffff81a6051a>] kmalloc_trace+0x2a/0xe0
[<ffffffff84064369>] vlan_vid_add+0x409/0x790
[<ffffffff84068e21>] vlan_device_event+0x1491/0x21a0
[<ffffffff81440c8e>] notifier_call_chain+0xbe/0x1f0
[<ffffffff8372383a>] call_netdevice_notifiers_info+0xba/0x150
[<ffffffff837590f2>] __dev_notify_flags+0x132/0x2e0
[<ffffffff8375ad9f>] dev_change_flags+0x11f/0x180
[<ffffffff8379af36>] do_setlink+0xb96/0x4060
[<ffffffff837adf6a>] __rtnl_newlink+0xc0a/0x18a0
[<ffffffff837aec6c>] rtnl_newlink+0x6c/0xa0
[<ffffffff837ac64e>] rtnetlink_rcv_msg+0x43e/0xe00
[<ffffffff839a99e0>] netlink_rcv_skb+0x170/0x440
[<ffffffff839a738f>] netlink_unicast+0x53f/0x810
[<ffffffff839a7fcb>] netlink_sendmsg+0x96b/0xe90
[<ffffffff8369d12f>] ____sys_sendmsg+0x30f/0xa70
[<ffffffff836a6d7a>] ___sys_sendmsg+0x13a/0x1e0
[2]
ip link add name t-nlmon type nlmon
ip link add name t-dummy type dummy
ip link add name t-bond type bond mode active-backup
ip link set dev t-bond up
ip link set dev t-nlmon master t-bond
ip link set dev t-nlmon nomaster
ip link show dev t-bond
ip link set dev t-dummy master t-bond
ip link show dev t-bond
ip link del dev t-bond
ip link del dev t-dummy
ip link del dev t-nlmon
[3]
Before:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 46:57:39:a4:46:a2 brd ff:ff:ff:ff:ff:ff
After:
12: t-bond: <NO-CARRIER,BROADCAST,MULTICAST,MASTER,UP> mtu 1500 qdisc noqueue state DOWN mode DEFAULT group default qlen 1000
link/netlink
12: t-bond: <BROADCAST,MULTICAST,MASTER,UP,LOWER_UP> mtu 1500 qdisc noqueue state UP mode DEFAULT group default qlen 1000
link/ether 66:48:7b:74:b6:8a brd ff:ff:ff:ff:ff:ff
Fixes:
|
||
|
Jakub Kicinski
|
92e8c732d8 |
Merge git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf
Pablo Neira Ayuso says: ==================== Netfilter fixes for net The following patchset contains Netfilter fixes for net: 1) Unbreak br_netfilter physdev match support, from Florian Westphal. 2) Use GFP_KERNEL_ACCOUNT for stateful/policy objects, from Chen Aotian. 3) Use IS_ENABLED() in nf_reset_trace(), from Florian Westphal. 4) Fix validation of catch-all set element. 5) Tighten requirements for catch-all set elements. * git://git.kernel.org/pub/scm/linux/kernel/git/netfilter/nf: netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements netfilter: nf_tables: validate catch-all set elements netfilter: nf_tables: fix ifdef to also consider nf_tables=m netfilter: nf_tables: Modify nla_memdup's flag to GFP_KERNEL_ACCOUNT netfilter: br_netfilter: fix recent physdev match breakage ==================== Link: https://lore.kernel.org/r/20230418145048.67270-1-pablo@netfilter.org Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Lorenzo Bianconi
|
8267fc71ab |
veth: take into account peer device for NETDEV_XDP_ACT_NDO_XMIT xdp_features flag
For veth pairs, NETDEV_XDP_ACT_NDO_XMIT is supported by the current
device if the peer one is running a XDP program or if it has GRO enabled.
Fix the xdp_features flags reporting considering peer device and not
current one for NETDEV_XDP_ACT_NDO_XMIT.
Fixes:
|
||
|
Nikita Zhandarovich
|
c0e73276f0 |
mlxfw: fix null-ptr-deref in mlxfw_mfa2_tlv_next()
Function mlxfw_mfa2_tlv_multi_get() returns NULL if 'tlv' in
question does not pass checks in mlxfw_mfa2_tlv_payload_get(). This
behaviour may lead to NULL pointer dereference in 'multi->total_len'.
Fix this issue by testing mlxfw_mfa2_tlv_multi_get()'s return value
against NULL.
Found by Linux Verification Center (linuxtesting.org) with static
analysis tool SVACE.
Fixes:
|
||
|
Paolo Abeni
|
28e63d01a9 |
Merge branch 'bnxt_en-bug-fixes'
Michael Chan says: ==================== bnxt_en: Bug fixes This small series contains 2 fixes. The first one fixes the PTP initialization logic on older chips to avoid logging a warning. The second one fixes a potenial NULL pointer dereference in the driver's aux bus unload path. ==================== Link: https://lore.kernel.org/r/20230417065819.122055-1-michael.chan@broadcom.com Signed-off-by: Paolo Abeni <pabeni@redhat.com> |
||
|
Kalesh AP
|
4f4e54b104 |
bnxt_en: Fix a possible NULL pointer dereference in unload path
In the driver unload path, the driver currently checks the valid
BNXT_FLAG_ROCE_CAP flag in bnxt_rdma_aux_device_uninit() before
proceeding. This is flawed because the flag may not be set initially
during driver load. It may be set later after the NVRAM setting is
changed followed by a firmware reset. Relying on the
BNXT_FLAG_ROCE_CAP flag may crash in bnxt_rdma_aux_device_uninit() if
the aux device was never initialized:
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
PGD 8ae6aa067 P4D 0
Oops: 0000 [#1] SMP NOPTI
CPU: 39 PID: 42558 Comm: rmmod Kdump: loaded Tainted: G OE --------- - - 4.18.0-348.el8.x86_64 #1
Hardware name: Dell Inc. PowerEdge R750/0WT8Y6, BIOS 1.5.4 12/17/2021
RIP: 0010:device_del+0x1b/0x410
Code: 89 a5 50 03 00 00 4c 89 a5 58 03 00 00 eb 89 0f 1f 44 00 00 41 56 41 55 41 54 4c 8d a7 80 00 00 00 55 53 48 89 fb 48 83 ec 18 <48> 8b 2f 4c 89 e7 65 48 8b 04 25 28 00 00 00 48 89 44 24 10 31 c0
RSP: 0018:ff7f82bf469a7dc8 EFLAGS: 00010292
RAX: 0000000000000000 RBX: 0000000000000000 RCX: 0000000000000000
RDX: 0000000000000000 RSI: 0000000000000206 RDI: 0000000000000000
RBP: ff31b7cd114b0ac0 R08: 0000000000000000 R09: ffffffff935c3400
R10: ff31b7cd45bc3440 R11: 0000000000000001 R12: 0000000000000080
R13: ffffffffc1069f40 R14: 0000000000000000 R15: 0000000000000000
FS: 00007fc9903ce740(0000) GS:ff31b7d4ffac0000(0000) knlGS:0000000000000000
CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000992fee004 CR4: 0000000000773ee0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400
PKRU: 55555554
Call Trace:
bnxt_rdma_aux_device_uninit+0x1f/0x30 [bnxt_en]
bnxt_remove_one+0x2f/0x1f0 [bnxt_en]
pci_device_remove+0x3b/0xc0
device_release_driver_internal+0x103/0x1f0
driver_detach+0x54/0x88
bus_remove_driver+0x77/0xc9
pci_unregister_driver+0x2d/0xb0
bnxt_exit+0x16/0x2c [bnxt_en]
__x64_sys_delete_module+0x139/0x280
do_syscall_64+0x5b/0x1a0
entry_SYSCALL_64_after_hwframe+0x65/0xca
RIP: 0033:0x7fc98f3af71b
Fix this by modifying the check inside bnxt_rdma_aux_device_uninit()
to check for bp->aux_priv instead. We also need to make some changes
in bnxt_rdma_aux_device_init() to make sure that bp->aux_priv is set
only when the aux device is fully initialized.
Fixes:
|
||
|
Michael Chan
|
e8b51a1a15 |
bnxt_en: Do not initialize PTP on older P3/P4 chips
The driver does not support PTP on these older chips and it is assuming
that firmware on these older chips will not return the
PORT_MAC_PTP_QCFG_RESP_FLAGS_HWRM_ACCESS flag in __bnxt_hwrm_ptp_qcfg(),
causing the function to abort quietly.
But newer firmware now sets this flag and so __bnxt_hwrm_ptp_qcfg()
will proceed further. Eventually it will fail in bnxt_ptp_init() ->
bnxt_map_ptp_regs() because there is no code to support the older chips.
The driver will then complain:
"PTP initialization failed.\n"
Fix it so that we abort quietly earlier without going through the
unnecessary steps and alarming the user with the warning log.
Fixes:
|
||
|
Pablo Neira Ayuso
|
d4eb7e3992 |
netfilter: nf_tables: tighten netlink attribute requirements for catch-all elements
If NFT_SET_ELEM_CATCHALL is set on, then userspace provides no set element
key. Otherwise, bail out with -EINVAL.
Fixes:
|
||
|
Duoming Zhou
|
e50b9b9e86 |
cxgb4: fix use after free bugs caused by circular dependency problem
The flower_stats_timer can schedule flower_stats_work and
flower_stats_work can also arm the flower_stats_timer. The
process is shown below:
----------- timer schedules work ------------
ch_flower_stats_cb() //timer handler
schedule_work(&adap->flower_stats_work);
----------- work arms timer ------------
ch_flower_stats_handler() //workqueue callback function
mod_timer(&adap->flower_stats_timer, ...);
When the cxgb4 device is detaching, the timer and workqueue
could still be rearmed. The process is shown below:
(cleanup routine) | (timer and workqueue routine)
remove_one() |
free_some_resources() | ch_flower_stats_cb() //timer
cxgb4_cleanup_tc_flower() | schedule_work()
del_timer_sync() |
| ch_flower_stats_handler() //workqueue
| mod_timer()
cancel_work_sync() |
kfree(adapter) //FREE | ch_flower_stats_cb() //timer
| adap->flower_stats_work //USE
This patch changes del_timer_sync() to timer_shutdown_sync(),
which could prevent rearming of the timer from the workqueue.
Fixes:
|
||
|
Pablo Neira Ayuso
|
d46fc89414 |
netfilter: nf_tables: validate catch-all set elements
catch-all set element might jump/goto to chain that uses expressions
that require validation.
Fixes:
|
||
|
Jacob Keller
|
1a2bd3bd72 |
ice: document RDMA devlink parameters
Commit
|
||
|
Aleksandr Loktionov
|
c86c00c693 |
i40e: fix i40e_setup_misc_vector() error handling
Add error handling of i40e_setup_misc_vector() in i40e_rebuild().
In case interrupt vectors setup fails do not re-open vsi-s and
do not bring up vf-s, we have no interrupts to serve a traffic
anyway.
Fixes:
|
||
|
Aleksandr Loktionov
|
8485d093b0 |
i40e: fix accessing vsi->active_filters without holding lock
Fix accessing vsi->active_filters without holding the mac_filter_hash_lock.
Move vsi->active_filters = 0 inside critical section and
move clear_bit(__I40E_VSI_OVERFLOW_PROMISC, vsi->state) after the critical
section to ensure the new filters from other threads can be added only after
filters cleaning in the critical section is finished.
Fixes:
|
||
|
Florian Westphal
|
c55c0e91c8 |
netfilter: nf_tables: fix ifdef to also consider nf_tables=m
nftables can be built as a module, so fix the preprocessor conditional
accordingly.
Fixes:
|
||
|
Pedro Tammela
|
338469d677 |
net/sched: clear actions pointer in miss cookie init fail
Palash reports a UAF when using a modified version of syzkaller[1].
When 'tcf_exts_miss_cookie_base_alloc()' fails in 'tcf_exts_init_ex()'
a call to 'tcf_exts_destroy()' is made to free up the tcf_exts
resources.
In flower, a call to '__fl_put()' when 'tcf_exts_init_ex()' fails is made;
Then calling 'tcf_exts_destroy()', which triggers an UAF since the
already freed tcf_exts action pointer is lingering in the struct.
Before the offending patch, this was not an issue since there was no
case where the tcf_exts action pointer could linger. Therefore, restore
the old semantic by clearing the action pointer in case of a failure to
initialize the miss_cookie.
[1] https://github.com/cmu-pasta/linux-kernel-enriched-corpus
v1->v2: Fix compilation on configs without tc actions (kernel test robot)
Fixes:
|
||
|
Ding Hui
|
a80bb8e723 |
sfc: Fix use-after-free due to selftest_work
There is a use-after-free scenario that is: When the NIC is down, user set mac address or vlan tag to VF, the xxx_set_vf_mac() or xxx_set_vf_vlan() will invoke efx_net_stop() and efx_net_open(), since netif_running() is false, the port will not start and keep port_enabled false, but selftest_work is scheduled in efx_net_open(). If we remove the device before selftest_work run, the efx_stop_port() will not be called since the NIC is down, and then efx is freed, we will soon get a UAF in run_timer_softirq() like this: [ 1178.907941] ================================================================== [ 1178.907948] BUG: KASAN: use-after-free in run_timer_softirq+0xdea/0xe90 [ 1178.907950] Write of size 8 at addr ff11001f449cdc80 by task swapper/47/0 [ 1178.907950] [ 1178.907953] CPU: 47 PID: 0 Comm: swapper/47 Kdump: loaded Tainted: G O --------- -t - 4.18.0 #1 [ 1178.907954] Hardware name: SANGFOR X620G40/WI2HG-208T1061A, BIOS SPYH051032-U01 04/01/2022 [ 1178.907955] Call Trace: [ 1178.907956] <IRQ> [ 1178.907960] dump_stack+0x71/0xab [ 1178.907963] print_address_description+0x6b/0x290 [ 1178.907965] ? run_timer_softirq+0xdea/0xe90 [ 1178.907967] kasan_report+0x14a/0x2b0 [ 1178.907968] run_timer_softirq+0xdea/0xe90 [ 1178.907971] ? init_timer_key+0x170/0x170 [ 1178.907973] ? hrtimer_cancel+0x20/0x20 [ 1178.907976] ? sched_clock+0x5/0x10 [ 1178.907978] ? sched_clock_cpu+0x18/0x170 [ 1178.907981] __do_softirq+0x1c8/0x5fa [ 1178.907985] irq_exit+0x213/0x240 [ 1178.907987] smp_apic_timer_interrupt+0xd0/0x330 [ 1178.907989] apic_timer_interrupt+0xf/0x20 [ 1178.907990] </IRQ> [ 1178.907991] RIP: 0010:mwait_idle+0xae/0x370 If the NIC is not actually brought up, there is no need to schedule selftest_work, so let's move invoking efx_selftest_async_start() into efx_start_all(), and it will be canceled by broughting down. Fixes: |
||
|
Xuan Zhuo
|
853618d588 |
virtio_net: bugfix overflow inside xdp_linearize_page()
Here we copy the data from the original buf to the new page. But we
not check that it may be overflow.
As long as the size received(including vnethdr) is greater than 3840
(PAGE_SIZE -VIRTIO_XDP_HEADROOM). Then the memcpy will overflow.
And this is completely possible, as long as the MTU is large, such
as 4096. In our test environment, this will cause crash. Since crash is
caused by the written memory, it is meaningless, so I do not include it.
Fixes:
|
||
|
Ilya Leoshkevich
|
c730fce7c7 |
s390/bpf: Fix bpf_arch_text_poke() with new_addr == NULL
Thomas Richter reported a crash in linux-next with a backtrace similar
to the following one:
[<0000000000000000>] 0x0
([<000000000031a182>] bpf_trace_run4+0xc2/0x218)
[<00000000001d59f4>] __bpf_trace_sched_switch+0x1c/0x28
[<0000000000c44a3a>] __schedule+0x43a/0x890
[<0000000000c44ef8>] schedule+0x68/0x110
[<0000000000c4e5ca>] do_nanosleep+0xa2/0x168
[<000000000026e7fe>] hrtimer_nanosleep+0xf6/0x1c0
[<000000000026eb6e>] __s390x_sys_nanosleep+0xb6/0xf0
[<0000000000c3b81c>] __do_syscall+0x1e4/0x208
[<0000000000c50510>] system_call+0x70/0x98
Last Breaking-Event-Address:
[<000003ff7fda1814>] bpf_prog_65e887c70a835bbf_on_switch+0x1a4/0x1f0
The problem is that bpf_arch_text_poke() with new_addr == NULL is
susceptible to the following race condition:
T1 T2
----------------- -------------------
plt.target = NULL
entry: brcl 0xf,plt
entry.mask = 0
lgrl %r1,plt.target
br %r1
Fix by setting PLT target to the instruction following `brcl 0xf,plt`
instead of 0. This way T2 will simply resume the execution of the eBPF
program, which is the desired effect of passing new_addr == NULL.
Fixes:
|
||
|
Gwangun Jung
|
3037933448 |
net: sched: sch_qfq: prevent slab-out-of-bounds in qfq_activate_agg
If the TCA_QFQ_LMAX value is not offered through nlattr, lmax is determined by the MTU value of the network device.
The MTU of the loopback device can be set up to 2^31-1.
As a result, it is possible to have an lmax value that exceeds QFQ_MIN_LMAX.
Due to the invalid lmax value, an index is generated that exceeds the QFQ_MAX_INDEX(=24) value, causing out-of-bounds read/write errors.
The following reports a oob access:
[ 84.582666] BUG: KASAN: slab-out-of-bounds in qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.583267] Read of size 4 at addr ffff88810f676948 by task ping/301
[ 84.583686]
[ 84.583797] CPU: 3 PID: 301 Comm: ping Not tainted 6.3.0-rc5 #1
[ 84.584164] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.15.0-1 04/01/2014
[ 84.584644] Call Trace:
[ 84.584787] <TASK>
[ 84.584906] dump_stack_lvl (lib/dump_stack.c:107 (discriminator 1))
[ 84.585108] print_report (mm/kasan/report.c:320 mm/kasan/report.c:430)
[ 84.585570] kasan_report (mm/kasan/report.c:538)
[ 84.585988] qfq_activate_agg.constprop.0 (net/sched/sch_qfq.c:1027 net/sched/sch_qfq.c:1060 net/sched/sch_qfq.c:1313)
[ 84.586599] qfq_enqueue (net/sched/sch_qfq.c:1255)
[ 84.587607] dev_qdisc_enqueue (net/core/dev.c:3776)
[ 84.587749] __dev_queue_xmit (./include/net/sch_generic.h:186 net/core/dev.c:3865 net/core/dev.c:4212)
[ 84.588763] ip_finish_output2 (./include/net/neighbour.h:546 net/ipv4/ip_output.c:228)
[ 84.589460] ip_output (net/ipv4/ip_output.c:430)
[ 84.590132] ip_push_pending_frames (./include/net/dst.h:444 net/ipv4/ip_output.c:126 net/ipv4/ip_output.c:1586 net/ipv4/ip_output.c:1606)
[ 84.590285] raw_sendmsg (net/ipv4/raw.c:649)
[ 84.591960] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.592084] __sys_sendto (net/socket.c:2142)
[ 84.593306] __x64_sys_sendto (net/socket.c:2150)
[ 84.593779] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.593902] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.594070] RIP: 0033:0x7fe568032066
[ 84.594192] Code: 0e 0d 00 f7 d8 64 89 02 48 c7 c0 ff ff ff ff eb b8 0f 1f 00 41 89 ca 64 8b 04 25 18 00 00 00 85 c09[ 84.594796] RSP: 002b:00007ffce388b4e8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
Code starting with the faulting instruction
===========================================
[ 84.595047] RAX: ffffffffffffffda RBX: 00007ffce388cc70 RCX: 00007fe568032066
[ 84.595281] RDX: 0000000000000040 RSI: 00005605fdad6d10 RDI: 0000000000000003
[ 84.595515] RBP: 00005605fdad6d10 R08: 00007ffce388eeec R09: 0000000000000010
[ 84.595749] R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
[ 84.595984] R13: 00007ffce388cc30 R14: 00007ffce388b4f0 R15: 0000001d00000001
[ 84.596218] </TASK>
[ 84.596295]
[ 84.596351] Allocated by task 291:
[ 84.596467] kasan_save_stack (mm/kasan/common.c:46)
[ 84.596597] kasan_set_track (mm/kasan/common.c:52)
[ 84.596725] __kasan_kmalloc (mm/kasan/common.c:384)
[ 84.596852] __kmalloc_node (./include/linux/kasan.h:196 mm/slab_common.c:967 mm/slab_common.c:974)
[ 84.596979] qdisc_alloc (./include/linux/slab.h:610 ./include/linux/slab.h:731 net/sched/sch_generic.c:938)
[ 84.597100] qdisc_create (net/sched/sch_api.c:1244)
[ 84.597222] tc_modify_qdisc (net/sched/sch_api.c:1680)
[ 84.597357] rtnetlink_rcv_msg (net/core/rtnetlink.c:6174)
[ 84.597495] netlink_rcv_skb (net/netlink/af_netlink.c:2574)
[ 84.597627] netlink_unicast (net/netlink/af_netlink.c:1340 net/netlink/af_netlink.c:1365)
[ 84.597759] netlink_sendmsg (net/netlink/af_netlink.c:1942)
[ 84.597891] sock_sendmsg (net/socket.c:724 net/socket.c:747)
[ 84.598016] ____sys_sendmsg (net/socket.c:2501)
[ 84.598147] ___sys_sendmsg (net/socket.c:2557)
[ 84.598275] __sys_sendmsg (./include/linux/file.h:31 net/socket.c:2586)
[ 84.598399] do_syscall_64 (arch/x86/entry/common.c:50 arch/x86/entry/common.c:80)
[ 84.598520] entry_SYSCALL_64_after_hwframe (arch/x86/entry/entry_64.S:120)
[ 84.598688]
[ 84.598744] The buggy address belongs to the object at ffff88810f674000
[ 84.598744] which belongs to the cache kmalloc-8k of size 8192
[ 84.599135] The buggy address is located 2664 bytes to the right of
[ 84.599135] allocated 7904-byte region [ffff88810f674000, ffff88810f675ee0)
[ 84.599544]
[ 84.599598] The buggy address belongs to the physical page:
[ 84.599777] page:00000000e638567f refcount:1 mapcount:0 mapping:0000000000000000 index:0x0 pfn:0x10f670
[ 84.600074] head:00000000e638567f order:3 entire_mapcount:0 nr_pages_mapped:0 pincount:0
[ 84.600330] flags: 0x200000000010200(slab|head|node=0|zone=2)
[ 84.600517] raw: 0200000000010200 ffff888100043180 dead000000000122 0000000000000000
[ 84.600764] raw: 0000000000000000 0000000080020002 00000001ffffffff 0000000000000000
[ 84.601009] page dumped because: kasan: bad access detected
[ 84.601187]
[ 84.601241] Memory state around the buggy address:
[ 84.601396] ffff88810f676800: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601620] ffff88810f676880: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.601845] >ffff88810f676900: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602069] ^
[ 84.602243] ffff88810f676980: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602468] ffff88810f676a00: fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc fc
[ 84.602693] ==================================================================
[ 84.602924] Disabling lock debugging due to kernel taint
Fixes:
|
||
|
Linus Torvalds
|
829cca4d17 |
Merge tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net
Pull networking fixes from Jakub Kicinski:
"Including fixes from bpf, and bluetooth.
Not all that quiet given spring celebrations, but "current" fixes are
thinning out, which is encouraging. One outstanding regression in the
mlx5 driver when using old FW, not blocking but we're pushing for a
fix.
Current release - new code bugs:
- eth: enetc: workaround for unresponsive pMAC after receiving
express traffic
Previous releases - regressions:
- rtnetlink: restore RTM_NEW/DELLINK notification behavior, keep the
pid/seq fields 0 for backward compatibility
Previous releases - always broken:
- sctp: fix a potential overflow in sctp_ifwdtsn_skip
- mptcp:
- use mptcp_schedule_work instead of open-coding it and make the
worker check stricter, to avoid scheduling work on closed
sockets
- fix NULL pointer dereference on fastopen early fallback
- skbuff: fix memory corruption due to a race between skb coalescing
and releasing clones confusing page_pool reference counting
- bonding: fix neighbor solicitation validation on backup slaves
- bpf: tcp: use sock_gen_put instead of sock_put in bpf_iter_tcp
- bpf: arm64: fixed a BTI error on returning to patched function
- openvswitch: fix race on port output leading to inf loop
- sfp: initialize sfp->i2c_block_size at sfp allocation to avoid
returning a different errno than expected
- phy: nxp-c45-tja11xx: unregister PTP, purge queues on remove
- Bluetooth: fix printing errors if LE Connection times out
- Bluetooth: assorted UaF, deadlock and data race fixes
- eth: macb: fix memory corruption in extended buffer descriptor mode
Misc:
- adjust the XDP Rx flow hash API to also include the protocol layers
over which the hash was computed"
* tag 'net-6.3-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net: (50 commits)
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
xdp: rss hash types representation
selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters
skbuff: Fix a race between coalescing and releasing SKBs
net: macb: fix a memory corruption in extended buffer descriptor mode
selftests: add the missing CONFIG_IP_SCTP in net config
udp6: fix potential access to stale information
selftests: openvswitch: adjust datapath NL message declaration
selftests: mptcp: userspace pm: uniform verify events
mptcp: fix NULL pointer dereference on fastopen early fallback
mptcp: stricter state check in mptcp_worker
mptcp: use mptcp_schedule_work instead of open-coding it
net: enetc: workaround for unresponsive pMAC after receiving express traffic
sctp: fix a potential overflow in sctp_ifwdtsn_skip
net: qrtr: Fix an uninit variable access bug in qrtr_tx_resume()
rtnetlink: Restore RTM_NEW/DELLINK notification behavior
net: ti/cpsw: Add explicit platform_device.h and of_platform.h includes
...
|
||
|
Linus Torvalds
|
4413ad01e2 |
Merge tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux
Pull devicetree fixes from Rob Herring: - Fix interaction between fw_devlink and DT overlays causing devices to not be probed - Fix the compatible string for loongson,cpu-interrupt-controller * tag 'devicetree-fixes-for-6.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/robh/linux: treewide: Fix probing of devices in DT overlays dt-bindings: interrupt-controller: loongarch: Fix mismatched compatible |
||
|
Linus Torvalds
|
531f27ad5e |
Merge tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl
Pull pin control fix from Linus Walleij: "This is just a revert of the AMD fix, because the fix broke some laptops. We are working on a proper solution" * tag 'pinctrl-v6.3-3' of git://git.kernel.org/pub/scm/linux/kernel/git/linusw/linux-pinctrl: Revert "pinctrl: amd: Disable and mask interrupts on resume" |
||
|
Linus Torvalds
|
f1be7b6c16 |
Merge tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm
Pull drm fixes from Daniel Vetter: - two fbcon regressions - amdgpu: dp mst, smu13 - i915: dual link dsi for tgl+ - armada, nouveau, drm/sched, fbmem * tag 'drm-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm: fbcon: set_con2fb_map needs to set con2fb_map! fbcon: Fix error paths in set_con2fb_map drm/amd/pm: correct the pcie link state check for SMU13 drm/amd/pm: correct SMU13.0.7 max shader clock reporting drm/amd/pm: correct SMU13.0.7 pstate profiling clock settings drm/amd/display: Pass the right info to drm_dp_remove_payload drm/armada: Fix a potential double free in an error handling path fbmem: Reject FB_ACTIVATE_KD_TEXT from userspace drm/nouveau/fb: add missing sysmen flush callbacks drm/i915/dsi: fix DSS CTL register offsets for TGL+ drm/scheduler: Fix UAF race in drm_sched_entity_push_job() |
||
|
Jakub Kicinski
|
d0f89c4c1d |
Merge tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf
Daniel Borkmann says: ==================== pull-request: bpf 2023-04-13 We've added 6 non-merge commits during the last 1 day(s) which contain a total of 14 files changed, 205 insertions(+), 38 deletions(-). The main changes are: 1) One late straggler fix on the XDP hints side which fixes bpf_xdp_metadata_rx_hash kfunc API before the release goes out in order to provide information on the RSS hash type, from Jesper Dangaard Brouer. * tag 'for-netdev' of https://git.kernel.org/pub/scm/linux/kernel/git/bpf/bpf: selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type veth: bpf_xdp_metadata_rx_hash add xdp rss hash type mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type xdp: rss hash types representation selftests/bpf: xdp_hw_metadata remove bpf_printk and add counters ==================== Link: https://lore.kernel.org/r/20230413192939.10202-1-daniel@iogearbox.net Signed-off-by: Jakub Kicinski <kuba@kernel.org> |
||
|
Daniel Vetter
|
cab2932213 |
Merge tag 'drm-misc-fixes-2023-04-13' of git://anongit.freedesktop.org/drm/drm-misc into drm-fixes
Short summary of fixes pull: * armada: Fix double free * fb: Clear FB_ACTIVATE_KD_TEXT in ioctl * nouveau: Add missing callbacks * scheduler: Fix use-after-free error Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch> From: Thomas Zimmermann <tzimmermann@suse.de> Link: https://patchwork.freedesktop.org/patch/msgid/20230413184233.GA8148@linux-uq9g |
||
|
Alexei Starovoitov
|
b65ef48c95 |
Merge branch 'XDP-hints: change RX-hash kfunc bpf_xdp_metadata_rx_hash'
Jesper Dangaard Brouer says: ==================== Current API for bpf_xdp_metadata_rx_hash() returns the raw RSS hash value, but doesn't provide information on the RSS hash type (part of 6.3-rc). This patchset proposal is to change the function call signature via adding a pointer value argument for providing the RSS hash type. Patchset also removes all bpf_printk's from xdp_hw_metadata program that we expect driver developers to use. Instead counters are introduced for relaying e.g. skip and fail info. ==================== Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jesper Dangaard Brouer
|
0f26b74e7d |
selftests/bpf: Adjust bpf_xdp_metadata_rx_hash for new arg
Update BPF selftests to use the new RSS type argument for kfunc bpf_xdp_metadata_rx_hash. Signed-off-by: Jesper Dangaard Brouer <brouer@redhat.com> Acked-by: Toke Høiland-Jørgensen <toke@redhat.com> Acked-by: Stanislav Fomichev <sdf@google.com> Link: https://lore.kernel.org/r/168132894068.340624.8914711185697163690.stgit@firesoul Signed-off-by: Alexei Starovoitov <ast@kernel.org> |
||
|
Jesper Dangaard Brouer
|
9123397aee |
mlx4: bpf_xdp_metadata_rx_hash add xdp rss hash type
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via matching individual Completion Queue Entry (CQE) status bits.
Fixes:
|
||
|
Jesper Dangaard Brouer
|
96b1a098f3 |
veth: bpf_xdp_metadata_rx_hash add xdp rss hash type
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type.
The veth driver currently only support XDP-hints based on SKB code path.
The SKB have lost information about the RSS hash type, by compressing
the information down to a single bitfield skb->l4_hash, that only knows
if this was a L4 hash value.
In preparation for veth, the xdp_rss_hash_type have an L4 indication
bit that allow us to return a meaningful L4 indication when working
with SKB based packets.
Fixes:
|
||
|
Jesper Dangaard Brouer
|
67f245c2ec |
mlx5: bpf_xdp_metadata_rx_hash add xdp rss hash type
Update API for bpf_xdp_metadata_rx_hash() with arg for xdp rss hash type
via mapping table.
The mlx5 hardware can also identify and RSS hash IPSEC. This indicate
hash includes SPI (Security Parameters Index) as part of IPSEC hash.
Extend xdp core enum xdp_rss_hash_type with IPSEC hash type.
Fixes:
|
||
|
Jesper Dangaard Brouer
|
0cd917a4a8 |
xdp: rss hash types representation
The RSS hash type specifies what portion of packet data NIC hardware used
when calculating RSS hash value. The RSS types are focused on Internet
traffic protocols at OSI layers L3 and L4. L2 (e.g. ARP) often get hash
value zero and no RSS type. For L3 focused on IPv4 vs. IPv6, and L4
primarily TCP vs UDP, but some hardware supports SCTP.
Hardware RSS types are differently encoded for each hardware NIC. Most
hardware represent RSS hash type as a number. Determining L3 vs L4 often
requires a mapping table as there often isn't a pattern or sorting
according to ISO layer.
The patch introduce a XDP RSS hash type (enum xdp_rss_hash_type) that
contains both BITs for the L3/L4 types, and combinations to be used by
drivers for their mapping tables. The enum xdp_rss_type_bits get exposed
to BPF via BTF, and it is up to the BPF-programmer to match using these
defines.
This proposal change the kfunc API bpf_xdp_metadata_rx_hash() adding
a pointer value argument for provide the RSS hash type.
Change signature for all xmo_rx_hash calls in drivers to make it compile.
The RSS type implementations for each driver comes as separate patches.
Fixes:
|