AT91 fixes for 6.1
It contains:
- signal name fix for a pin on SAMA7G5
- memory self-refresh fix for SAMA7G5 by avoid soft resetting AC
DLL which can introduce glitches in RAM controller and lead to
unexpected behavior
- led support fix for lan966x-pcb8291 board by enabling sgpio node
* tag 'at91-fixes-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/at91/linux:
ARM: at91: pm: avoid soft resetting AC DLL
ARM: dts: lan966x: Enable sgpio on pcb8291
ARM: dts: at91: sama7g5: fix signal name of pin PB2
Link: https://lore.kernel.org/r/20221110115411.180876-1-claudiu.beznea@microchip.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Qualcomm ARM64 DTS fixes for 6.1
This fixes the APCS register region on IPQ8074 to not overlap
with adjacent nodes.
It lists the valid LDO modes on a variety of platforms, as this is not
required by the binding and implementation.
The reference clocks for the two UFS instances on SC8280XP are
corrected, to avoid relying on the state left by most versions of the
bootloader.
A number of issues are corrected with regards to the QMP PHY register
ranges on SC8280XP.
SC7280 gains a missing lpass reset region.
Lastly cluster idle is termporarily disabled on SM8250 to avoid issues
with booting the platform, until the last missing pieces lands.
* tag 'qcom-arm64-fixes-for-6.1' of https://git.kernel.org/pub/scm/linux/kernel/git/qcom/linux:
arm64: dts: qcom: sm8250: Disable the not yet supported cluster idle state
arm64: dts: qcom: sc7280: Add the reset reg for lpass audiocc on SC7280
arm64: dts: qcom: sc8280xp: fix UFS PHY serdes size
arm64: dts: qcom: sc8280xp: drop broken DP PHY nodes
arm64: dts: qcom: sc8280xp: fix USB PHY PCS registers
arm64: dts: qcom: sc8280xp: fix USB1 PHY RX1 registers
arm64: dts: qcom: sc8280xp: fix USB0 PHY PCS_MISC registers
arm64: dts: qcom: sc8280xp: correct ref clock for ufs_mem_phy
arm64: dts: qcom: sc8280xp: fix ufs_card_phy ref clock
arm64: dts: qcom: sm8350-hdk: Specify which LDO modes are allowed
arm64: dts: qcom: sm8250-xperia-edo: Specify which LDO modes are allowed
arm64: dts: qcom: sm8150-xperia-kumano: Specify which LDO modes are allowed
arm64: dts: qcom: sc8280xp-crd: Specify which LDO modes are allowed
arm64: dts: qcom: sa8295p-adp: Specify which LDO modes are allowed
arm64: dts: qcom: sa8155p-adp: Specify which LDO modes are allowed
Revert "arm64: dts: qcom: msm8996: add missing TCSR syscon compatible"
arm64: dts: qcom: ipq8074: correct APCS register space size
Link: https://lore.kernel.org/r/20221110040635.795921-1-andersson@kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Armv8 Juno fix for v6.1
Just a single fix to add the missing critical points in the thermal
zones that has been mandatory in the binding but was enforced in the
code recently.
* tag 'juno-fix-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
arm64: dts: juno: Add thermal critical trip points
Link: https://lore.kernel.org/r/20221102140156.2758137-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arm SCMI fixes for v6.1
A bunch of fixes to handle:
1. A possible resource leak in scmi_remove(). The returned error
value gets ignored by the driver core and can remove the device and
free the devm-allocated resources. As a simple solution to be able to
easily backport, the bind attributes in the driver is suppressed as
there is no need to support it. Additionally the remove path is cleaned
up by adding device links between the core and the protocol devices
so that a proper and complete unbinding happens.
2. A possible spin-loop in the SCMI transmit path in case of misbehaving
platform firmware. A timeout is added to the existing loop so that
the SCMI stack can bailout aborting the transmission with warnings.
3. Optional Rx channel correctly by reporting any memory errors instead
of ignoring the same with other allowed errors.
4. The use of proper device for all the device managed allocations in the
virtio transport.
5. Incorrect deferred_tx_wq release on the error paths by using devres
API(devm_add_action_or_reset) to manage the release in the error path.
* tag 'scmi-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/sudeep.holla/linux:
firmware: arm_scmi: Fix deferred_tx_wq release on error paths
firmware: arm_scmi: Fix devres allocation device in virtio transport
firmware: arm_scmi: Make Rx chan_setup fail on memory errors
firmware: arm_scmi: Make tx_prepare time out eventually
firmware: arm_scmi: Suppress the driver's bind attributes
firmware: arm_scmi: Cleanup the core driver removal callback
Link: https://lore.kernel.org/r/20221102140142.2758107-1-sudeep.holla@arm.com
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
SCMI Rx channels are optional and they can fail to be setup when not
present but anyway channels setup routines must bail-out on memory errors.
Make channels setup, and related probing, fail when memory errors are
reported on Rx channels.
Fixes: 5c8a47a5a9 ("firmware: arm_scmi: Make scmi core independent of the transport type")
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-4-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
SCMI transports based on shared memory, at start of transmissions, have
to wait for the shared Tx channel area to be eventually freed by the
SCMI platform before accessing the channel. In fact the channel is owned
by the SCMI platform until marked as free by the platform itself and,
as such, cannot be used by the agent until relinquished.
As a consequence a badly misbehaving SCMI platform firmware could lock
the channel indefinitely and make the kernel side SCMI stack loop
forever waiting for such channel to be freed, possibly hanging the
whole boot sequence.
Add a timeout to the existent Tx waiting spin-loop so that, when the
system ends up in this situation, the SCMI stack can at least bail-out,
nosily warn the user, and abort the transmission.
Reported-by: YaxiongTian <iambestgod@outlook.com>
Suggested-by: YaxiongTian <iambestgod@outlook.com>
Cc: Vincent Guittot <vincent.guittot@linaro.org>
Cc: Etienne Carriere <etienne.carriere@linaro.org>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-3-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Platform drivers .remove callbacks are not supposed to fail and report
errors. Such errors are indeed ignored by the core platform drivers
and the driver unbind process is anyway completed.
The SCMI core platform driver as it is now, instead, bails out reporting
an error in case of an explicit unbind request.
Fix the removal path by adding proper device links between the core SCMI
device and the SCMI protocol devices so that a full SCMI stack unbind is
triggered when the core driver is removed. The remove process does not
bail out anymore on the anomalous conditions triggered by an explicit
unbind but the user is still warned.
Reported-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Cristian Marussi <cristian.marussi@arm.com>
Link: https://lore.kernel.org/r/20221028140833.280091-1-cristian.marussi@arm.com
Signed-off-by: Sudeep Holla <sudeep.holla@arm.com>
Recent changes to the thermal framework has made the trip
points (trips) for thermal zones compulsory, which made
the Ux500 DTS files break validation and also stopped
probing because of similar changes to the code.
Fix this by adding an "outer bounding box": battery thermal
zones should not get warmer than 70 degress, then we will
shut down.
Fixes: 8c59632423 ("dt-bindings: thermal: Fix missing required property")
Fixes: 3fd6d6e2b4 ("thermal/of: Rework the thermal device tree initialization")
Signed-off-by: Linus Walleij <linus.walleij@linaro.org>
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Cc: linux-pm@vger.kernel.org
Link: https://lore.kernel.org/r/20221030210854.346662-1-linus.walleij@linaro.org'
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
i.MX fixes for 6.1:
- Fix imx93-pd driver to release resources when error occurs in probe.
- A series from Ioana Ciornei to add missing clock frequencies for MDIO
controllers on LayerScape SoCs, so that the kernel driver can work
independently from bootloader.
- A series from Li Jun to fix USB power domain setup in i.MX8MM/N device
trees.
- Fix CPLD_Dn pull configuration for MX8Menlo board to avoid interfering
with CPLD power off functionality.
- Fix ctrl_sleep_moci GPIO setup for verdin-imx8mp board.
- Fix DT schema check warnings on uSDHC clocks for imx8-ss-conn device
tree.
- Fix up gpcv2 DT bindings to have an optional `power-domains` property.
- A couple of i.MX93 device tree fixes on S4MU interrupt and gpio-ranges
of GPIO controllers.
- Keep PU regulator on for Quad and QuadPlus based imx6dl-yapp4 boards to
work around a hardware design flaw in supply voltage distribution.
- Fix user push-button GPIO offset on imx6qdl-gw59 boards.
* tag 'imx-fixes-6.1' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux:
arm64: dts: ls208xa: specify clock frequencies for the MDIO controllers
arm64: dts: ls1088a: specify clock frequencies for the MDIO controllers
arm64: dts: lx2160a: specify clock frequencies for the MDIO controllers
soc: imx: imx93-pd: Fix the error handling path of imx93_pd_probe()
arm64: dts: imx93: correct gpio-ranges
arm64: dts: imx93: correct s4mu interrupt names
dt-bindings: power: gpcv2: add power-domains property
arm64: dts: imx8: correct clock order
ARM: dts: imx6dl-yapp4: Do not allow PM to switch PU regulator off on Q/QP
ARM: dts: imx6qdl-gw59{10,13}: fix user pushbutton GPIO offset
arm64: dts: imx8mn: Correct the usb power domain
arm64: dts: imx8mn: remove otg1 power domain dependency on hsio
arm64: dts: imx8mm: correct usb power domains
arm64: dts: imx8mm: remove otg1/2 power domain dependency on hsio
arm64: dts: verdin-imx8mp: fix ctrl_sleep_moci
arm64: dts: imx8mm: Enable CPLD_Dn pull down resistor on MX8Menlo
Link: https://lore.kernel.org/r/20221101031547.GB125525@dragon
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 0420dde30a ("arm64: dts: ls208xa: add the external MDIO nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: bbe75af7b0 ("arm64: dts: ls1088a: add external MDIO device nodes")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Up until now, the external MDIO controller frequency values relied
either on the default ones out of reset or on those setup by u-boot.
Let's just properly specify the MDC frequency in the DTS so that even
without u-boot's intervention Linux can drive the MDIO bus.
Fixes: 6e1b8fae89 ("arm64: dts: lx2160a: add emdio1 node")
Fixes: 5705b9dcda ("arm64: dts: lx2160a: add emdio2 node")
Signed-off-by: Ioana Ciornei <ioana.ciornei@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
In imx93_pd_probe(); if an error occurs, some resources need to be released
as done in the remove function.
Fixes: 0a0f7cc25d ("soc: imx: add i.MX93 SRC power domain driver")
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per binding doc, interrupt names should be tx and rx.
Fixes: 0dfb380d24 ("arm64: dts: imx93: add s4 mu node")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Some pgc power-domain requires a parent power domain, so
add an optional power-domains property, otherwise there will be
dt check warning:
gpc@303a0000: pgc:power-domain@1: 'power-domains' does not match
any of the regexes: 'pinctrl-[0-9]+'
Fixes: 30af8513bd ("dt-bindings: power: add defines for i.MX8MM power domains")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Per bindings/mmc/fsl-imx-esdhc.yaml, the clock order is ipg, ahb, per,
otherwise warning: "
mmc@5b020000: clock-names:1: 'ahb' was expected
mmc@5b020000: clock-names:2: 'per' was expected "
Fixes: 16c4ea7501 ("arm64: dts: imx8: switch to new lpcg clock binding")
Signed-off-by: Peng Fan <peng.fan@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Fix our design flaw in supply voltage distribution on the Quad and QuadPlus
based boards.
The problem is that we supply the SoC cache (VDD_CACHE_CAP) from VDD_PU
instead of VDD_SOC. The VDD_PU internal regulator can be disabled by PM
if VPU or GPU is not used. If that happens the system freezes. To prevent
that configure the reg_pu regulator to be always on.
Fixes: 0de4ab81ab ("ARM: dts: imx6dl-yapp4: Add Y Soft IOTA Crux/Crux+ board")
Cc: petrben@gmail.com
Cc: stable@vger.kernel.org
Signed-off-by: Petr Benes <petr.benes@ysoft.com>
Signed-off-by: Michal Vokáč <michal.vokac@ysoft.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GW5910 and GW5913 have a user pushbutton that is tied to the
Gateworks System Controller GPIO offset 2. Fix the invalid offset of 0.
Fixes: 64bf0a0af1 ("ARM: dts: imx6qdl-gw: add Gateworks System Controller support")
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1 power domain
to the usb phy node.
Fixes: ea2b5af58a ("arm64: dts: imx8mn: put USB controller into power-domains")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1 is an independent power domain of hsio, it's for usb phy,
so remove hsio power domain from its node.
Fixes: 8b8ebec673 ("arm64: dts: imx8mn: add GPC node")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1/2 is actual the power domain of usb PHY, usb controller
is in hsio power domain, and pgc_otg1/2 is required to be powered
up to detect usb remote wakeup, so move the pgc_otg1/2 power domain
to the usb phy node.
Fixes: 01df28d808 ("arm64: dts: imx8mm: put USB controllers into power-domains")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
pgc_otg1/2 are independent power domain of hsio, they for usb phy,
so remove hsio power domain dependency from its node.
Fixes: d39d4bb153 ("arm64: dts: imx8mm: add GPC node")
Signed-off-by: Li Jun <jun.li@nxp.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
The GPIO signaling ctrl_sleep_moci is currently handled as a gpio hog.
But the gpio-hog node is made a child of the wrong gpio controller.
Move it to the node representing gpio4 so that it actually works.
Without this carrier board components jumpered to use the signal are
unconditionally switched off.
Fixes: a39ed23bdf ("arm64: dts: freescale: add initial support for verdin imx8m plus")
Signed-off-by: Max Krummenacher <max.krummenacher@toradex.com>
Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
To support the deeper cluster idle state for sm8250 platforms, some
additional synchronization is needed between the rpmh-rsc device and the
CPU cluster PM domain. Until that is supported, let's disable the cluster
idle state.
This fixes a problem that has been reported for the Qcom RB5 platform (see
below), but most likely other sm8250 platforms suffers from similar issues,
so let's make the fix generic for sm8250.
vreg_l11c_3p3: failed to enable: -ETIMEDOUT
qcom-rpmh-regulator 18200000.rsc:pm8150l-rpmh-regulators: ldo11: devm_regulator_register() failed, ret=-110
qcom-rpmh-regulator: probe of 18200000.rsc:pm8150l-rpmh-regulators failed with error -110
Reported-by: Amit Pundir <amit.pundir@linaro.org>
Fixes: 32bc936d73 ("arm64: dts: qcom: sm8250: Add cpuidle states")
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Tested-by: Amit Pundir <amit.pundir@linaro.org>
Reviewed-by: Sudeep Holla <sudeep.holla@arm.com>
Signed-off-by: Bjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20221027115745.240516-1-ulf.hansson@linaro.org
Pull kvm fixes from Paolo Bonzini:
"RISC-V:
- Fix compilation without RISCV_ISA_ZICBOM
- Fix kvm_riscv_vcpu_timer_pending() for Sstc
ARM:
- Fix a bug preventing restoring an ITS containing mappings for very
large and very sparse device topology
- Work around a relocation handling error when compiling the nVHE
object with profile optimisation
- Fix for stage-2 invalidation holding the VM MMU lock for too long
by limiting the walk to the largest block mapping size
- Enable stack protection and branch profiling for VHE
- Two selftest fixes
x86:
- add compat implementation for KVM_X86_SET_MSR_FILTER ioctl
selftests:
- synchronize includes between include/uapi and tools/include/uapi"
* tag 'for-linus' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
tools: include: sync include/api/linux/kvm.h
KVM: x86: Add compat handler for KVM_X86_SET_MSR_FILTER
KVM: x86: Copy filter arg outside kvm_vm_ioctl_set_msr_filter()
kvm: Add support for arch compat vm ioctls
RISC-V: KVM: Fix kvm_riscv_vcpu_timer_pending() for Sstc
RISC-V: Fix compilation without RISCV_ISA_ZICBOM
KVM: arm64: vgic: Fix exit condition in scan_its_table()
KVM: arm64: nvhe: Fix build with profile optimization
KVM: selftests: Fix number of pages for memory slot in memslot_modification_stress_test
KVM: arm64: selftests: Fix multiple versions of GIC creation
KVM: arm64: Enable stack protection and branch profiling for VHE
KVM: arm64: Limit stage2_apply_range() batch size to largest block
KVM: arm64: Work out supported block level at compile time
This reverts commit 72a9585972.
It broke reboots on big-endian MIPS and MIPS64 malta QEMU instances,
which use the syscon driver. Little-endian is not effected, which means
likely it's important to handle regmap_get_val_endian() in this function
after all.
Fixes: 72a9585972 ("mfd: syscon: Remove repetition of the regmap_get_val_endian()")
Reviewed-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Lee Jones <lee@kernel.org>
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Pull perf fixes from Borislav Petkov:
- Fix raw data handling when perf events are used in bpf
- Rework how SIGTRAPs get delivered to events to address a bunch of
problems with it. Add a selftest for that too
* tag 'perf_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
bpf: Fix sample_flags for bpf_perf_event_output
selftests/perf_events: Add a SIGTRAP stress test with disables
perf: Fix missing SIGTRAPs
Pull scheduler fixes from Borislav Petkov:
- Adjust code to not trip up CFI
- Fix sched group cookie matching
* tag 'sched_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched: Introduce struct balance_callback to avoid CFI mismatches
sched/core: Fix comparison in sched_group_cookie_match()
Pull objtool fix from Borislav Petkov:
- Fix ORC stack unwinding when GCOV is enabled
* tag 'objtool_urgent_for_v6.1_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/unwind/orc: Fix unreliable stack dump with gcov
Pull x86 fixes from Borislav Petkov:
"As usually the case, right after a major release, the tip urgent
branches accumulate a couple more fixes than normal. And here is the
x86, a bit bigger, urgent pile.
- Use the correct CPU capability clearing function on the error path
in Intel perf LBR
- A CFI fix to ftrace along with a simplification
- Adjust handling of zero capacity bit mask for resctrl cache
allocation on AMD
- A fix to the AMD microcode loader to attempt patch application on
every logical thread
- A couple of topology fixes to handle CPUID leaf 0x1f enumeration
info properly
- Drop a -mabi=ms compiler option check as both compilers support it
now anyway
- A couple of fixes to how the initial, statically allocated FPU
buffer state is setup and its interaction with dynamic states at
runtime"
* tag 'x86_urgent_for_v6.0_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix copy_xstate_to_uabi() to copy init states correctly
perf/x86/intel/lbr: Use setup_clear_cpu_cap() instead of clear_cpu_cap()
ftrace,kcfi: Separate ftrace_stub() and ftrace_stub_graph()
x86/ftrace: Remove ftrace_epilogue()
x86/resctrl: Fix min_cbm_bits for AMD
x86/microcode/AMD: Apply the patch early on every logical thread
x86/topology: Fix duplicated core ID within a package
x86/topology: Fix multiple packages shown on a single-package system
hwmon/coretemp: Handle large core ID value
x86/Kconfig: Drop check for -mabi=ms for CONFIG_EFI_STUB
x86/fpu: Exclude dynamic states from init_fpstate
x86/fpu: Fix the init_fpstate size check with the actual size
x86/fpu: Configure init_fpstate attributes orderly
Pull io_uring follow-up from Jens Axboe:
"Currently the zero-copy has automatic fallback to normal transmit, and
it was decided that it'd be cleaner to return an error instead if the
socket type doesn't support it.
Zero-copy does work with UDP and TCP, it's more of a future proofing
kind of thing (eg for samba)"
* tag 'io_uring-6.1-2022-10-22' of git://git.kernel.dk/linux:
io_uring/net: fail zc sendmsg when unsupported by socket
io_uring/net: fail zc send when unsupported by socket
net: flag sockets supporting msghdr originated zerocopy
Enable CPLD_Dn pull down resistor instead of pull up to avoid
intefering with CPLD power off functionality.
Fixes: 510c527b4f ("arm64: dts: imx8mm: Add i.MX8M Mini Toradex Verdin based Menlo board")
Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Fabio Estevam <festevam@denx.de>
Signed-off-by: Shawn Guo <shawnguo@kernel.org>
Pull hwmon fixes from Guenter Roeck:
- corsair-psu: Fix typo in USB id description, and add USB ID for new
PSU
- pwm-fan: Fix fan power handling when disabling fan control
* tag 'hwmon-for-v6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (corsair-psu) Add USB id of the new HX1500i psu
hwmon: (pwm-fan) Explicitly switch off fan power when setting pwm1_enable to 0
hwmon: (corsair-psu) fix typo in USB id description
Pull i2c fixes from Wolfram Sang:
"RPM fix for qcom-cci, platform module alias for xiic, build warning
fix for mlxbf, typo fixes in comments"
* tag 'i2c-for-6.1-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: mlxbf: depend on ACPI; clean away ifdeffage
i2c: fix spelling typos in comments
i2c: qcom-cci: Fix ordering of pm_runtime_xx and i2c_add_adapter
i2c: xiic: Add platform module alias
Pull pci fixes from Bjorn Helgaas:
- Revert a simplification that broke pci-tegra due to a masking error
- Update MAINTAINERS for Kishon's email address change and TI
DRA7XX/J721E maintainer change
* tag 'pci-v6.1-fixes-2' of git://git.kernel.org/pub/scm/linux/kernel/git/helgaas/pci:
MAINTAINERS: Update Kishon's email address in PCI endpoint subsystem
MAINTAINERS: Add Vignesh Raghavendra as maintainer of TI DRA7XX/J721E PCI driver
Revert "PCI: tegra: Use PCI_CONF1_EXT_ADDRESS() macro"
Pull missed media updates from Mauro Carvalho Chehab:
"It seems I screwed-up my previous pull request: it ends up that only
half of the media patches that were in linux-next got merged in -rc1.
The script which creates the signed tags silently failed due to
5.19->6.0 so it ended generating a tag with incomplete stuff.
So here are the missing parts:
- a DVB core security fix
- lots of fixes and cleanups for atomisp staging driver
- old drivers that are VB1 are being moved to staging to be
deprecated
- several driver updates - mostly for embedded systems, but there are
also some things addressing issues with some PC webcams, in the UVC
video driver"
* tag 'media/v6.1-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (163 commits)
media: sun6i-csi: Move csi buffer definition to main header file
media: sun6i-csi: Introduce and use video helper functions
media: sun6i-csi: Add media ops with link notify callback
media: sun6i-csi: Remove controls handler from the driver
media: sun6i-csi: Register the media device after creation
media: sun6i-csi: Pass and store csi device directly in video code
media: sun6i-csi: Tidy up video code
media: sun6i-csi: Tidy up v4l2 code
media: sun6i-csi: Tidy up Kconfig
media: sun6i-csi: Use runtime pm for clocks and reset
media: sun6i-csi: Define and use variant to get module clock rate
media: sun6i-csi: Always set exclusive module clock rate
media: sun6i-csi: Tidy up platform code
media: sun6i-csi: Refactor main driver data structures
media: sun6i-csi: Define and use driver name and (reworked) description
media: cedrus: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-rotate: Add a Kconfig dependency on RESET_CONTROLLER
media: sun8i-di: Add a Kconfig dependency on RESET_CONTROLLER
media: sun4i-csi: Add a Kconfig dependency on RESET_CONTROLLER
media: sun6i-csi: Add a Kconfig dependency on RESET_CONTROLLER
...
