__drm_atomic_helper_bridge_reset() is used to initialize a
newly allocated drm_bridge_state, and is being typically called by the
drm_bridge_funcs.atomic_reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_bridge_state instance, we will need to call
__drm_atomic_helper_bridge_reset() from both the atomic_reset and
atomic_create_state hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_bridge_reset() to
__drm_atomic_helper_bridge_state_init().
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Tested-by: Luca Ceresoli <luca.ceresoli@bootlin.com> # imx8mp + sn65dsi84 + bridge hotplug
Link: https://patch.msgid.link/20260619-drm-no-more-bridge-reset-v3-3-ff399263111b@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
The drm_bridge_funcs atomic_get_output_bus_fmts operation should be the
same for likely every HDMI connector bridge, unless such an HDMI
connector bridge has some special hardware restrictions that I cannot
envision yet.
To avoid code duplication and standardize on a set of media bus formats
that the HDMI output color formats translate to, add a common helper
function that implements this operation to the drm bridge helpers.
The function returns a list of output bus formats based on the HDMI
bridge's current output bits-per-component, and its bitmask of supported
color formats.
To guard against future expansion of DRM_OUTPUT_COLOR_FORMAT outgrowing
the hweight8 call, add a BUILD_BUG_ON statement where it's used that
checks for DRM_OUTPUT_COLOR_FORMAT_COUNT. The justification for not
using hweight32 in all cases is that not all ISAs have a popcount
instruction, and will benefit from a smaller/faster software
implementation that doesn't have to operate across all bits.
The justification for not defining an hweight_color depending on the
value of DRM_OUTPUT_COLOR_FORMAT_COUNT is that this count enum value is
only known at compile time, not at preprocessor time.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-7-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Add a new general DRM property named "color format" which can be used by
userspace to request the display driver to output a particular color
format.
Possible string values for the new enum property are:
- "AUTO" (setup by default, driver internally picks the color format)
- "RGB"
- "YUV 4:4:4"
- "YUV 4:2:2"
- "YUV 4:2:0"
Drivers should advertise from this list the formats they support in an
optimistic best-case scenario. EDID data from the sink can then be used
in the kernel's atomic check phase to restrict this set of formats, as
well as by userspace to make a correct choice in the first place.
Co-developed-by: Werner Sembach <wse@tuxedocomputers.com>
Signed-off-by: Werner Sembach <wse@tuxedocomputers.com>
Co-developed-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Andri Yngvason <andri@yngvason.is>
Signed-off-by: Marius Vlad <marius.vlad@collabora.com>
Reviewed-by: Maxime Ripard <mripard@kernel.org>
Reviewed-by: Daniel Stone <daniel@fooishbar.org>
Signed-off-by: Nicolas Frattaroli <nicolas.frattaroli@collabora.com>
Link: https://patch.msgid.link/20260609-color-format-v17-3-35739b5782cc@collabora.com
Signed-off-by: Daniel Stone <daniels@collabora.com>
Setting 6th or 9th bit of drm.debug change debug logging. Meanwhile
`modinfo drm` does not inform about it at all.
Add info to MODULE_PARAM_DESC(debug, ...) about setting 6th and 9th bit
basing on DECLARE_DYNDBG_CLASSMAP(drm_debug_classes, ...). Match
description of corresponding bits with enum drm_debug_category. Include
9th bit in the example with enabling all possible logging provided at
comment at include/drm/drm_print.h.
Signed-off-by: Michał Grzelak <michal.grzelak@intel.com>
Reviewed-by: Chaitanya Kumar Borah <chaitanya.kumar.borah@intel.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260522135520.1862848-2-michal.grzelak@intel.com
The DisplayPort AUX channel gets initialized and registered during
dw_dp_bind(), but it is never unregistered, which may lead to resource
leaks and/or use-after-free.
Add the missing dw_dp_unbind() function to allow the users of the
library to handle the required cleanup, i.e. unregister the AUX adapter.
Fixes: 86eecc3a9c ("drm/bridge: synopsys: Add DW DPTX Controller support library")
Reviewed-by: Andy Yan <andy.yan@rock-chips.com>
Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@collabora.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Link: https://patch.msgid.link/20260601-drm-rk-fixes-v4-1-c3f3f123e1da@collabora.com
The DRIVER_GEM_GPUVA feature flag is currently only used to control two
behaviors within the DRM core:
- calling drm_gem_gpuva_init() during
GEM object initialization
- creating the "gpuvas" debugfs entry
drm_gem_gpuva_init() is a plain INIT_LIST_HEAD() and therefore is cheap
to run for every GEM object. The DRM_DEBUGFS_GPUVA_INFO macro is only
referenced by GPU-VA capable drivers, so clearing the feature bit does
not cause any unrelated drivers to get the "gpuvas" debugfs node. The
flag doesn't have any relevant purpose (e.g. gating ioctl handlers or MM
logic) and doesn't provide any practical benefit.
Remove the flag definition and drop it from all drivers that use it,
call drm_gem_gpuva_init() unconditionally and clear the driver features
bit in DRM_DEBUGFS_GPUVA_INFO.
Signed-off-by: Laura Nao <laura.nao@collabora.com>
Acked-by: Rob Clark <rob.clark@oss.qualcomm.com>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Acked-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Link: https://patch.msgid.link/20260421084701.24227-1-laura.nao@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
drm_mode_config_reset() can be used to create the initial state, but
also to return to the initial state, when doing a suspend/resume cycle
for example.
It also affects both the software and the hardware, and drivers can
choose to reset the hardware as well. Most will just create an empty
state and the synchronisation between hardware and software states will
effectively be done when the first commit is done.
That dual role can be harmful, since some objects do need to be
initialized but also need to be preserved across a suspend/resume cycle.
drm_private_obj are such objects for example.
Thus, create another helper for drivers to call to initialize their
state when the driver is loaded, so we can make
drm_mode_config_reset() only about handling suspend/resume and similar.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-16-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 47b5ac7daa ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states.
Instead of relying on the reset() callback, it created a new
atomic_create_state hook. This is helpful because reset is a bit
overloaded: it's used to create the initial software state, reset it,
but also reset the hardware.
It can also be used either at probe time, to create the initial state
and possibly reset the hardware to an expected default, but also during
suspend/resume.
Both these cases come with different expectations too: during the
initialization, we want to initialize all states, but during
suspend/resume, drm_private_states for example are expected to be kept
around.
reset() also isn't fallible, which makes it harder to handle
initialization errors properly. This is only really relevant for some
drivers though, since all the helpers for reset only create a new
state, and don't touch the hardware at all.
It was thus decided to create a new hook that would allocate and
initialize a pristine state without any side effect:
atomic_create_state to untangle a bit some of it, and to separate the
initialization with the actual reset one might need during a
suspend/resume.
Continue the transition to the new pattern with connectors.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-15-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_connector_hdmi_reset() is typically used to
initialize a newly allocated drm_connector_state when the connector is
using the HDMI helpers, and is being called by the
drm_connector_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_connector_state instance, we will need to call
__drm_atomic_helper_connector_hdmi_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_connector_hdmi_reset() to
__drm_atomic_helper_connector_hdmi_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-14-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_connector_state_reset() is used to initialize a
newly allocated drm_connector_state, and is being typically called by
the drm_connector_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_connector_state instance, we will need to call
__drm_atomic_helper_connector_state_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_connector_state_reset() to
__drm_atomic_helper_connector_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-13-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 47b5ac7daa ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states.
Instead of relying on the reset() callback, it created a new
atomic_create_state hook. This is helpful because reset is a bit
overloaded: it's used to create the initial software state, reset it,
but also reset the hardware.
It can also be used either at probe time, to create the initial state
and possibly reset the hardware to an expected default, but also during
suspend/resume.
Both these cases come with different expectations too: during the
initialization, we want to initialize all states, but during
suspend/resume, drm_private_states for example are expected to be kept
around.
reset() also isn't fallible, which makes it harder to handle
initialization errors properly. This is only really relevant for some
drivers though, since all the helpers for reset only create a new
state, and don't touch the hardware at all.
It was thus decided to create a new hook that would allocate and
initialize a pristine state without any side effect:
atomic_create_state to untangle a bit some of it, and to separate the
initialization with the actual reset one might need during a
suspend/resume.
Continue the transition to the new pattern with CRTCs.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-12-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_crtc_state_reset() is used to initialize a newly
allocated drm_crtc_state, and is being typically called by the
drm_crtc_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_crtc_state instance, we will need to call
__drm_atomic_helper_crtc_state_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_crtc_state_reset() to
__drm_atomic_helper_crtc_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-11-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 47b5ac7daa ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states.
Instead of relying on the reset() callback, it created a new
atomic_create_state hook. This is helpful because reset is a bit
overloaded: it's used to create the initial software state, reset it,
but also reset the hardware.
It can also be used either at probe time, to create the initial state
and possibly reset the hardware to an expected default, but also during
suspend/resume.
Both these cases come with different expectations too: during the
initialization, we want to initialize all states, but during
suspend/resume, drm_private_states for example are expected to be kept
around.
reset() also isn't fallible, which makes it harder to handle
initialization errors properly. This is only really relevant for some
drivers though, since all the helpers for reset only create a new
state, and don't touch the hardware at all.
It was thus decided to create a new hook that would allocate and
initialize a pristine state without any side effect:
atomic_create_state to untangle a bit some of it, and to separate the
initialization with the actual reset one might need during a
suspend/resume.
Continue the transition to the new pattern with planes.
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-10-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
__drm_atomic_helper_plane_state_reset() is used to initialize a newly
allocated drm_plane_state, and is being typically called by the
drm_plane_funcs.reset implementation.
Since we want to consolidate DRM objects state allocation around the
atomic_create_state callback that will only allocate and initialize a
new drm_plane_state instance, we will need to call
__drm_atomic_helper_plane_state_reset() from both the reset and
atomic_create hooks.
To avoid any confusion, we can thus rename
__drm_atomic_helper_plane_state_reset() to
__drm_atomic_helper_plane_state_init().
Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-9-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Commit 47b5ac7daa ("drm/atomic: Add new atomic_create_state callback
to drm_private_obj") introduced a new pattern for allocating drm object
states.
Instead of relying on the reset() callback, it created a new
atomic_create_state hook. This is helpful because reset is a bit
overloaded: it's used to create the initial software state, reset it,
but also reset the hardware.
It can also be used either at probe time, to create the initial state
and possibly reset the hardware to an expected default, but also during
suspend/resume.
Both these cases come with different expectations too: during the
initialization, we want to initialize all states, but during
suspend/resume, drm_private_states for example are expected to be kept
around.
reset() also isn't fallible, which makes it harder to handle
initialization errors properly. This is only really relevant for some
drivers though, since all the helpers for reset only create a new
state, and don't touch the hardware at all.
It was thus decided to create a new hook that would allocate and
initialize a pristine state without any side effect:
atomic_create_state to untangle a bit some of it, and to separate the
initialization with the actual reset one might need during a
suspend/resume.
Continue the transition to the new pattern with drm_colorop.
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260526-drm-mode-config-init-v6-7-852346394200@kernel.org
Signed-off-by: Maxime Ripard <mripard@kernel.org>
Backmerging to get GEM LRU fixes from commit 379e8f1c ("drm/gem: Make
the GEM LRU lock part of drm_device") and other updates from v7.1-rc5.
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Boris Brezillion needs the gem lru fixes 379e8f1ca5 ("drm/gem: Make
the GEM LRU lock part of drm_device") backmerged for drm-misc-next.
That also means we need to sort out the rename conflict in panthor with
the fixup patch from Boris from drm-tip.
Signed-off-by: Simona Vetter <simona.vetter@ffwll.ch>
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Add VIRTIO_GPU_F_BLOB_ALIGNMENT flag.
Cross-subsystem Changes:
- Add common TMDS character rate constants to video/hdmi and use those
in bridge drivers.
Core Changes:
- Fix leak in drm_syncobj_find_fence.
- Fix OOB reads related to DP-MST.
- Create drm_get_bridge_by_endpoint and convert drivers to use it in
preparation of hotplug.
Driver Changes:
- Assorted bugfixes and cleanups to accel/ethosu, imagination, virtio,
rockchip.
- Expandable device heap support to amdxdna, bridge/chipone-icn6211.
- Add Surface Pro 12 panels.
- Convert ite-it6211 to use drm hdmi audio helpers.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f4034e3c-8290-49e1-9410-dc1f449265f4@linux.intel.com
Drivers were accessing this drm_exec member directly.
While that may seem harmless, it will require action if
the drm_exec utility is made a subclass of a dma-resv transaction
utility as outlined in the cover-letter.
Provide an accessor, drm_exec_ticket() to avoid that.
v2:
- Fix amdgpu compile error (Intel CI)
- Update the commit message.
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-5-thomas.hellstrom@linux.intel.com
The xe driver was using the drm_exec retry pointer directly to
restart the locking loop after out-of-memory errors. This is
relying on undocumented behaviour.
Instead add a drm_exec_retry() macro that can be used in this
situation, and that also warns if the struct drm_exec is
not newly (re-)initialized.
Use that macro in xe.
v2:
- Only allow if the drm_exec context is newly initialized.
(Christian)
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Link: https://patch.msgid.link/20260520101616.41284-4-thomas.hellstrom@linux.intel.com
drm_of_find_panel_or_bridge() is widely used, but many callers pass NULL
into the @panel or the @bridge arguments, thus making a very partial usage
of this rather complex function.
Besides, the bridge returned in @bridge is not refcounted, thus making this
API unsafe when DRM bridge hotplug will be introduced.
Solve both issues for the cases of calls to drm_of_find_panel_or_bridge()
with a NULL @panel pointer by adding a new function that only looks for
bridges (and is thus much simpler) and increments the refcount of the
returned bridge.
The new function is identical to drm_of_find_panel_or_bridge() except it:
- handles bridge refcounting: uses of_drm_find_and_get_bridge() instead of
of_drm_find_bridge() internally to return a refcounted bridge
- is simpler to use: just takes no @panel parameter, returns the pointer
in the return value instead of a double pointer argument
- has a simpler implementation: it is equal to
drm_of_find_panel_or_bridge() after removing the code that becomes dead
when @panel == NULL
Also add this function to drm_bridge.c and not drm_of.c because it returns
bridges only.
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@oss.qualcomm.com>
Reviewed-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Link: https://patch.msgid.link/20260511-drm-bridge-alloc-getput-panel_or_bridge-v6-2-f61c9e498b3f@bootlin.com
Signed-off-by: Luca Ceresoli <luca.ceresoli@bootlin.com>
Recently, a few races have been discovered in the GEM LRU logic, all
of them caused by the fact the LRU lock is accessed through
gem->lru->lock, and that very same lock also protects changes to
gem->lru, leading to situations where gem->lru needs to first be
accessed without the lock held, to then get the lru to access the lock
through and finally take the lock and do the expected operation.
Currently, the only driver making use of this API (MSM) declares a
device-wide lock, and the user we're about to add (panthor) will
do the same. There's no evidence that we will ever have a driver
that wants different pools of LRUs protected by different locks under
the same drm_device. So we're better off moving this lock to drm_device
and always locking it through obj->dev->gem_lru_mutex, or directly
through dev->gem_lru_mutex.
If anyone ever needs more fine-grained locking, this can be revisited
to pass some drm_gem_lru_pool object representing the pool of LRUs
under a specific lock, but for now, the per-device lock seems to be
enough.
Fixes: e7c2af13f8 ("drm/gem: Add LRU/shrinker helper")
Reported-by: Chia-I Wu <olvaffe@gmail.com>
Closes: https://gitlab.freedesktop.org/panfrost/linux/-/work_items/86
Reviewed-by: Rob Clark <rob.clark@oss.qualcomm.com>
Reviewed-by: Liviu Dudau <liviu.dudau@arm.com>
Reviewed-by: Steven Price <steven.price@arm.com>
Reviewed-by: Chia-I Wu <olvaffe@gmail.com>
Link: https://patch.msgid.link/20260518-panthor-shrinker-fixes-v4-1-1920234470d5@collabora.com
Signed-off-by: Boris Brezillon <boris.brezillon@collabora.com>
Short summary of fixes pull:
bridge:
- imx8qxp-pxl2dpi: avoid ERR_PTR with device_node cleanup
gma500:
- oaktrail_lvds: fix i2c handling
loongson:
- use managed cleanup for connector polling
panfrost:
- handle results from reservation locking correctly
qaic:
- check for integer overflows in mmap logic
rocket:
- handle results from reservation locking correctly
ttm:
- avoid infinite loop in swap out
- avoid infinite loop in BO shrinking
- convert -EAGAIN from dmem_cgroup_try_charge to -ENOSPC
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patch.msgid.link/20260515070816.GA88575@2a02-2455-9062-2500-7dec-552d-233d-9fe0.dyn6.pyur.net
- A Revert of a Kconfig patch that broke some builds (Jani)
- New fb_pin abstraction for xe and i915 fb transparent handling (Ville, Tvrtko)
- Skip inactive MST connectors on HDCP cases (Suraj)
- Reduce redundant intel_panel_fixed_mode (Ankit)
- Some general fixes (Imre, Chaitanya)
- Reorganize display documentation (Jani)
- Start switching to display specific reg types (Jani)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patch.msgid.link/agXbLMtMECnKy-YV@intel.com
strut intel_fb_pin_params will be an important part of the fb_pin
interface, so move the definition to the parent interface file.
Or maybe we should have a separate header for this kind of stuff
since the users of the parent interface will need the struct
definition but not the parent interface vfunc struct definitions?
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260508143426.26504-3-ville.syrjala@linux.intel.com
Introduce the "fb_pin" parent interface, as the first trivial step
move the *_get_map() stuff there.
The whole "fb_pin" as an interface might not really make sense,
and perhaps this (and other stuff) should just be collected into
some kind of "bo" interface. But let's go with "fb_pin" for now
to match where things are implemented, and possibly restructure
it later.
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patch.msgid.link/20260508143426.26504-2-ville.syrjala@linux.intel.com
Add additional DPCDs required to be configured to support VRR with Panel
Replay. These DPCDs are specifically required for configuring Adaptive Sync
SDP and are introduced in DP v2.1.
v2:
- Correct the shift for the bits. (Ville)
- Add DP_PR_ prefix for the PR-related fields.
v3:
- Use macro values in their shifted form to match the convention. (Ville)
v4:
- Add macro for the mask. (Ville)
Signed-off-by: Ankit Nautiyal <ankit.k.nautiyal@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Suraj Kandpal <suraj.kandpal@intel.com>
Link: https://patch.msgid.link/20260428074457.3566918-5-ankit.k.nautiyal@intel.com
When ttm_tt_swapout() fails, the current code calls
ttm_resource_add_bulk_move() followed by ttm_resource_move_to_lru_tail()
to restore the resource's bulk_move membership.
However, ttm_resource_move_to_lru_tail() places the resource at the tail
of the LRU list which, relative to the walk cursor's hitch node (placed
immediately after the resource when it was yielded), puts the resource
*in front of the* the hitch. The next list_for_each_entry_continue() from
the hitch finds the same resource again, causing an infinite loop.
Fix by deferring del_bulk_move to the success path only.
On the success path, TTM_TT_FLAG_SWAPPED has just been set by
ttm_tt_swapout() but the resource is still tracked in the bulk_move range,
so ttm_resource_del_bulk_move()'s !ttm_resource_unevictable() guard would
incorrectly skip the removal. Introduce
ttm_resource_del_bulk_move_unevictable() which bypasses that guard.
Reported-by: Jatin Kataria <jkataria@netflix.com>
Fixes: fc5d96670e ("drm/ttm: Move swapped objects off the manager's LRU list")
Cc: Christian König <christian.koenig@amd.com>
Cc: Matthew Brost <matthew.brost@intel.com>
Cc: <dri-devel@lists.freedesktop.org>
Cc: <stable@vger.kernel.org> # v6.13+
Assisted-by: GitHub_Copilot:claude-sonnet-4.6
Signed-off-by: Thomas Hellström <thomas.hellstrom@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Tested-by: Boqun Feng <boqun@kernel.org>
Link: https://patch.msgid.link/20260428094442.16985-1-thomas.hellstrom@linux.intel.com
drm-misc-next for v7.2-rc1:
UAPI Changes:
- Support medium/low power modes in amdxdna.
- Support limiting frequency in ivpu.
- Document license for drm core uAPI headers.
- Add the following DRM formats: P230, Y7, XYYY2101010, T430,
XVUY210101010.
Cross-subsystem Changes:
- Add and improve dt-bindings.
- Remove unused dma-fence-array's signal_on_any support.
Core Changes:
- Do not call drop_master on file close if not master.
- Convert drm-bridge and drm/atomic to use drm_printf_indent.
- Remove the extra call to drm_connector_attach_encoder after
drm_bridge_connector_init().
- Assorted docbook updates.
Driver Changes:
- Bugfixes in amdxdna, ivpu, mipi-dsi, imagination, nouveau, panthor,
bridge/analogix_dp, ipv3, lontium-lt8912b, verisilicon, tve200,
etnaviv, panel/focaltech-ota7290b, panel/jadard-jd9365da-h3,
bridge/ite-it6263, renesas, xlnx, bridge/cdns-dsi, gma500,
bridge/microchip-lvds, mgag200.
- Add support for MStar TSUMU88ADT3-LF-1 bridge.
- Add support for WaveShare 7, Novatek NT35532, Startek KD070HDFLD092,
ChipWealth CH13726A AMOLED, Team Source Display TST070WSNE-196C,
Displaytech DT050BTFT-PTS panels.
- Improve mipi-dsi shutdown and convert a panasonic panel to use the
mipi-dsi wrappers.
- Allowing dumping vbios over debugfs in GSP-RM mode.
- Update maintainers for ivpu, add reviewer for drm-bridge code
and update maintainers for LT8912B DRM HDMI bridge.
- Add test pattern support to bridge/ti-sn65dsi83.
- Convert vmwgfx to vblank timers.
- Add power management to sysfb drm drivers to allow suspend/resume.
- Support the aforementioned new drm formats in xlnx/qynqmp.
- Fix panel Kconfig dependencies.
- Add carveout support for debugging and bringup to amxdna.
- Add support for long command tx via videobuffer in bridge/tc358768.
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patch.msgid.link/f73f342d-6efb-416d-81b0-1716bdd98d5f@linux.intel.com
The kernel-doc block above struct drm_gpusvm_pages duplicates the
descriptions of the bit-flags that live in struct drm_gpusvm_pages_flags
using dotted notation (@flags.migrate_devmem, @flags.unmapped, ...).
That dotted notation is intended for nested anonymous structs/unions that
the parser flattens into the parent's parameter list. Here, however,
flags is of a named external type, so the parser does not flatten its
members and the dotted entries do not match any member of
drm_gpusvm_pages. They also duplicate the canonical descriptions already
present in the kernel-doc of struct drm_gpusvm_pages_flags itself.
Drop the five @flags.* lines and replace them with a single @flags entry
that cross-references the type via kernel-doc's "&struct ..." syntax.
This eliminates the redundancy and removes warnings emitted by the new
parameterdescs check in scripts/kernel-doc:
Excess struct member 'flags.migrate_devmem' description in
'drm_gpusvm_pages'
Excess struct member 'flags.unmapped' description in 'drm_gpusvm_pages'
Excess struct member 'flags.partial_unmap' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_devmem_pages' description in
'drm_gpusvm_pages'
Excess struct member 'flags.has_dma_mapping' description in
'drm_gpusvm_pages'
No functional change.
Assisted-by: Claude:claude-opus-4.6
Cc: Matthew Auld <matthew.auld@intel.com>
Signed-off-by: Shuicheng Lin <shuicheng.lin@intel.com>
Reviewed-by: Matthew Brost <matthew.brost@intel.com>
Signed-off-by: Matthew Brost <matthew.brost@intel.com>
Link: https://patch.msgid.link/20260501175956.4054088-1-shuicheng.lin@intel.com
