The custom sdhost controller on BCM2835 is feed by the critical VPU clock.
In preparation for PM suspend/resume support, add a proper clock handling
to the driver like in the other clock consumers (e.g. I2C).
Move the clock handling behind mmc_of_parse(), because it could return
with -EPROBE_DEFER and we want to minimize potential clock operation during
boot phase.
Signed-off-by: Stefan Wahren <wahrenst@gmx.net>
Message-ID: <20241025103621.4780-5-wahrenst@gmx.net>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Merge the mmc fixes for v6.12-rc[n] into the next branch, to allow them to
get tested together with the new mmc changes that are targeted for v6.13.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
On sdhci_gl9767_set_clock(), the vendor header space(VHS) is read-only
after calling gl9767_disable_ssc_pll() and gl9767_set_ssc_pll_205mhz().
So the low power negotiation mode cannot be enabled again.
Introduce gl9767_set_low_power_negotiation() function to fix it.
The explanation process is as below.
static void sdhci_gl9767_set_clock()
{
...
gl9767_vhs_write();
...
value |= PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <--- (a)
gl9767_disable_ssc_pll(); <--- (b)
sdhci_writew(host, 0, SDHCI_CLOCK_CONTROL);
if (clock == 0)
return; <-- (I)
...
if (clock == 200000000 && ios->timing == MMC_TIMING_UHS_SDR104) {
...
gl9767_set_ssc_pll_205mhz(); <--- (c)
}
...
value &= ~PCIE_GLI_9767_CFG_LOW_PWR_OFF;
pci_write_config_dword(pdev, PCIE_GLI_9767_CFG, value); <-- (II)
gl9767_vhs_read();
}
(a) disable low power negotiation mode. When return on (I), the low power
mode is disabled. After (b) and (c), VHS is read-only, the low power mode
cannot be enabled on (II).
Reported-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Fixes: d275435551 ("mmc: sdhci-pci-gli: Set SDR104's clock to 205MHz and enable SSC for GL9767")
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Tested-by: Georg Gottleuber <ggo@tuxedocomputers.com>
Cc: stable@vger.kernel.org
Message-ID: <20241025060017.1663697-1-benchuanggli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Reset controls being refcounted, they allow to share gpios across
drivers. Right now, reset framework and reset-gpio driver supports only
one reset gpio, so add support for one single reset control. If more
than one reset gpio is configured in the device tree, then fallback to
classic gpio control.
Signed-off-by: Catalin Popescu <catalin.popescu@leica-geosystems.com>
Message-ID: <20241017131957.1171323-1-catalin.popescu@leica-geosystems.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Mediatek SoC MT8196 features a new design for tx/rx path. The new tx
path incorporates register settings that are closely associated with
bus timing. And the difference between new rx path and older versions
is the usage of distinct register bits when setting the data sampling
edge as part of the tuning process.
Besides, the register settings for STOP_DLY_SEL and POP_EN_CNT are
different from previous SoCs.
For the changes mentioned in relation to the MT8196, the new compatible
string 'mediatek,mt8196-mmc' is introduced. This is to accommodate
different settings and workflows specific to the MT8196.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241011024906.8173-3-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
There are modified register settings for STOP_DLY_SEL and POP_EN_CNT
from our next generation SoCs, due to the advanced chip manufacturing
process and the resulting changes in the internal signal timing.
Add two new fields to the compatibility structure to reflect the
modifications. For legacy SoCs, also add the original value of
'stop_dly_sel' to the platform data, for unified code setting.
Signed-off-by: Andy-ld Lu <andy-ld.lu@mediatek.com>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Message-ID: <20241011024906.8173-2-andy-ld.lu@mediatek.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Changes are:
* Disable GL9755 overcurrent interrupt when power on/off on UHS-II.
* Enable the internal clock when do reset on UHS-II mode.
* Increase timeout value before detecting UHS-II interface.
* Add vendor settings fro UHS-II mode.
* Remove sdhci_gli_enable_internal_clock functon unused clk_ctrl variable.
* Make a function sdhci_gli_wait_software_reset_done() for gl9755 reset.
* Remove unnecessary code from sdhci_gl9755_reset().
Signed-off-by: Ben Chuang <ben.chuang@genesyslogic.com.tw>
Signed-off-by: AKASHI Takahiro <takahiro.akashi@linaro.org>
Signed-off-by: Victor Shih <victor.shih@genesyslogic.com.tw>
Signed-off-by: Lucas Lai <lucas.lai@genesyslogic.com.tw>
Acked-by: Adrian Hunter <adrian.hunter@intel.com>
Message-ID: <20241018105333.4569-16-victorshihgli@gmail.com>
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
GCC 13 complains about the truncated output of snprintf():
drivers/mmc/host/mmc_spi.c: In function ‘mmc_spi_response_get’:
drivers/mmc/host/mmc_spi.c:227:64: error: ‘snprintf’ output may be truncated before the last format character [-Werror=format-truncation=]
227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
| ^
drivers/mmc/host/mmc_spi.c:227:9: note: ‘snprintf’ output between 26 and 43 bytes into a destination of size 32
227 | snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s",
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
228 | cmd->opcode, maptype(cmd));
Drop it and fold the string it generates into the only place where it's
emitted - the dev_dbg() call at the end of the function.
Fixes: 15a0580ced ("mmc_spi host driver")
Suggested-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@linaro.org>
Link: https://lore.kernel.org/r/20241008160134.69934-1-brgl@bgdev.pl
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
'struct memstick_device_id' are not modified in these drivers.
Constifying this structure moves some data to a read-only section, so
increases overall security.
Update memstick_dev_match(), memstick_bus_match() and struct
memstick_driver accordingly.
On a x86_64, with allmodconfig, as an example:
Before:
======
text data bss dec hex filename
74055 3455 88 77598 12f1e drivers/memstick/core/ms_block.o
After:
=====
text data bss dec hex filename
74087 3423 88 77598 12f1e drivers/memstick/core/ms_block.o
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Link: https://lore.kernel.org/r/6509d6f6ed64193f04e747a98ccea7492c976ca8.1727540434.git.christophe.jaillet@wanadoo.fr
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
To allow an additional external regulator to be controlled by an mmc host
driver, let's add support for a vqmmc2 regulator to the mmc core.
For an SD UHS-II interface the vqmmc2 regulator may correspond to the so
called vdd2 supply, as described by the SD spec. Initially, only 1.8V is
needed, hence limit the new helper function, mmc_regulator_set_vqmmc2() to
this too.
Note that, to allow for flexibility mmc host drivers need to manage the
enable/disable of the vqmmc2 regulator themselves, while the regulator is
looked up through the common mmc_regulator_get_supply().
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-5-victorshihgli@gmail.com
To inform the users about SD UHS-II cards, let's extend the print at card
insertion with a "UHS-II" substring. Within this change, it seems
reasonable to convert from using "ultra high speed" into "UHS-I speed", for
the UHS-I type, as it should makes it more clear.
Note that, the new print for UHS-II cards doesn't include the actual
selected speed mode. Instead, this is going to be added from subsequent
change.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-4-victorshihgli@gmail.com
The SD UHS-II interface was introduced to the SD spec v4.00 several years
ago. The interface is fundamentally different from an electrical and a
protocol point of view, comparing to the legacy SD interface.
However, the legacy SD protocol is supported through a specific transport
layer (SD-TRAN) defined in the UHS-II addendum of the spec. This allows the
SD card to be managed in a very similar way as a legacy SD card, hence a
lot of code can be re-used to support these new types of cards through the
mmc subsystem.
Moreover, an SD card that supports the UHS-II interface shall also be
backwards compatible with the legacy SD interface, which allows a UHS-II
card to be inserted into a legacy slot. As a matter of fact, this is
already supported by mmc subsystem as of today.
To prepare to add support for UHS-II, this change puts the basic foundation
in the mmc core in place, allowing it to be more easily reviewed before
subsequent changes implements the actual support.
Basically, the approach here adds a new UHS-II bus_ops type and adds a
separate initialization path for the UHS-II card. The intent is to avoid us
from sprinkling the legacy initialization path, but also to simplify
implementation of the UHS-II specific bits.
At this point, there is only one new host ops added to manage the various
ios settings needed for UHS-II. Additional host ops that are needed, are
being added from subsequent changes.
Signed-off-by: Ulf Hansson <ulf.hansson@linaro.org>
Link: https://lore.kernel.org/r/20240913102836.6144-3-victorshihgli@gmail.com
