Cross-merge networking fixes after downstream PR.
Conflicts:
drivers/net/ethernet/broadcom/bnxt/bnxt.c
f7ce5eb2cb ("bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()")
20c8ad72eb ("eth: bnxt: use the RSS context XArray instead of the local list")
Adjacent changes:
net/ethtool/ioctl.c
503757c809 ("net: ethtool: Fix RSS setting")
eac9122f0c ("net: ethtool: record custom RSS contexts in the XArray")
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Jakub Kicinski says:
====================
eth: bnxt: use the new RSS API
Convert bnxt from using the set_rxfh API to separate create/modify/remove
callbacks.
Two small extensions to the core APIs are necessary:
- the ability to discard contexts if for some catastrophic reasons
device can no longer provide them;
- the ability to reserve space in the context for RSS table growth.
The driver is adjusted to store indirection tables on u32 to make
it easier to use core structs directly.
With that out of the way the conversion is fairly straightforward.
Since the opposition to discarding contexts was relatively mild
and its what bnxt does already, I'm sticking to that. We may very
well need to revisit that at a later time.
v1: https://lore.kernel.org/all/20240702234757.4188344-1-kuba@kernel.org/
====================
Link: https://patch.msgid.link/20240711220713.283778-1-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Instead of allocating a separate indir table in the vnic use
the one already present in the RSS context allocated by the core.
This saves some LoC and also we won't have to worry about syncing
the local version back to the core, once core learns how to dump
contexts.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-12-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
bnxt allocates tables of max size, and changes the used size
based on number of active rings. The unused entries get padded
out with zeros. bnxt_modify_rss() seems to always pad out
the table of the main / default RSS context, instead of
the table of the modified context.
I haven't observed any behavior change due to this patch,
so I don't think it's a fix. Not entirely sure what role
the padding plays, 0 is a valid queue ID.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-10-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Core can allocate space for per-context driver-private data,
use it for struct bnxt_rss_ctx. Inline bnxt_alloc_rss_ctx()
at this point, most of the init (as in the actions bnxt_del_one_rss_ctx()
will undo) is open coded in bnxt_create_rxfh_context(), anyway.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-8-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Use the new ethtool ops for RSS context management. The conversion
is pretty straightforward cut / paste of the right chunks of the
combined handler. Main change is that we let the core pick the IDs
(bitmap will be removed separately for ease of review), so we need
to tell the core when we lose a context.
Since the new API passes rxfh as const, change bnxt_modify_rss()
to also take const.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-5-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Contexts get deleted from FW when the device is down, but they
are kept in SW and re-added back on open. bnxt_set_rxfh_context()
apparently does not want to deal with complexity of dealing with
both the device down and device up cases. This is perhaps acceptable
for creating new contexts, but not being able to delete contexts
makes core-driven cleanups messy. Specifically with the new RSS
API core will try to delete contexts automatically after bringing
the device down.
Support the delete-while-down case. Skip the FW logic and delete
just the driver state.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-4-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Some drivers (bnxt but I think also mlx5 from ML discussions) change
the size of the indirection table depending on the number of Rx rings.
Decouple the max table size from the size of the currently used table,
so that we can reserve space in the context for table growth.
Static members in ethtool_ops are good enough for now, we can add
callbacks to read the max size more dynamically if someone needs
that.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-3-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
RSS contexts may get lost from a device, in various extreme circumstances.
Specifically if the firmware leaks resources and resets, or crashes and
either recovers in partially working state or the crash causes a
different FW version to run - creating the context again may fail.
Drivers should do their absolute best to prevent this from happening.
When it does, however, telling user that a context exists, when it can't
possibly be used any more is counter productive. Add a helper for
drivers to discard contexts. Print an error, in the future netlink
notification will also be sent.
More robust approaches were proposed, like keeping the contexts
but marking them as "dead" (but possibly resurrected by next reset).
That may be better but it's unclear at this stage whether the
effort is worth the benefits.
Reviewed-by: Pavan Chebbi <pavan.chebbi@broadcom.com>
Link: https://patch.msgid.link/20240711220713.283778-2-kuba@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Pull more networking fixes from Jakub Kicinski:
"A quick follow up to yesterday's pull. We got a regressions report for
the bnxt patch as soon as it got to your tree. The ethtool fix is also
good to have, although it's an older regression.
Current release - regressions:
- eth: bnxt_en: fix crash in bnxt_get_max_rss_ctx_ring() on older HW
when user tries to decrease the ring count
Previous releases - regressions:
- ethtool: fix RSS setting, accept "no change" setting if the driver
doesn't support the new features
- eth: i40e: remove needless retries of NVM update, don't wait 20min
when we know the firmware update won't succeed"
* tag 'net-6.10-rc8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/netdev/net:
bnxt_en: Fix crash in bnxt_get_max_rss_ctx_ring()
octeontx2-af: fix issue with IPv4 match for RSS
octeontx2-af: fix issue with IPv6 ext match for RSS
octeontx2-af: fix detection of IP layer
octeontx2-af: fix a issue with cpt_lf_alloc mailbox
octeontx2-af: replace cpt slot with lf id on reg write
i40e: fix: remove needless retries of NVM update
net: ethtool: Fix RSS setting
Pull btrfs fixes from David Sterba:
"Fix a regression in extent map shrinker behaviour.
In the past weeks we got reports from users that there are huge
latency spikes or freezes. This was bisected to newly added shrinker
of extent maps (it was added to fix a build up of the structures in
memory).
I'm assuming that the freezes would happen to many users after release
so I'd like to get it merged now so it's in 6.10. Although the diff
size is not small the changes are relatively straightforward, the
reporters verified the fixes and we did testing on our side.
The fixes:
- adjust behaviour under memory pressure and check lock or scheduling
conditions, bail out if needed
- synchronize tracking of the scanning progress so inode ranges are
not skipped or work duplicated
- do a delayed iput when scanning a root so evicting an inode does
not slow things down in case of lots of dirty data, also fix
lockdep warning, a deadlock could happen when writing the dirty
data would need to start a transaction"
* tag 'for-6.10-rc7-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux:
btrfs: avoid races when tracking progress for extent map shrinking
btrfs: stop extent map shrinker if reschedule is needed
btrfs: use delayed iput during extent map shrinking
Pull ceph fixes from Ilya Dryomov:
"A fix for a possible use-after-free following "rbd unmap" or "umount"
marked for stable and two kernel-doc fixups"
* tag 'ceph-for-6.10-rc8' of https://github.com/ceph/ceph-client:
libceph: fix crush_choose_firstn() kernel-doc warnings
libceph: suppress crush_choose_indep() kernel-doc warnings
libceph: fix race between delayed_work() and ceph_monc_stop()
Pull pmdomain fix from Ulf Hansson:
- qcom: Skip retention level for rpmhpd's
* tag 'pmdomain-v6.10-rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/ulfh/linux-pm:
pmdomain: qcom: rpmhpd: Skip retention level for Power Domains
Pull ARM SoC fixes from Arnd Bergmann:
"Most of these changes are Qualcomm SoC specific and came in just after
I sent out the last set of fixes. This includes two regression fixes
for SoC drivers, a defconfig change to ensure the Lenovo X13s is
usable and 11 changes to DT files to fix regressions and minor
platform specific issues.
Tony and Chunyan step back from their respective maintainership roles
on the omap and unisoc platforms, and Christophe in turn takes over
maintaining some of the Freescale SoC drivers that he has been taking
care of in practice already.
Lastly, there are two trivial fixes for the davinci and sunxi
platforms"
* tag 'arm-fixes-6.10-3' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
MAINTAINERS: Update FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY
MAINTAINERS: Add more maintainers for omaps
ARM: davinci: Convert comma to semicolon
MAINTAINERS: Move myself from SPRD Maintainer to Reviewer
Revert "dt-bindings: cache: qcom,llcc: correct QDU1000 reg entries"
arm64: dts: qcom: qdu1000: Fix LLCC reg property
arm64: dts: qcom: sm6115: add iommu for sdhc_1
arm64: dts: qcom: x1e80100-crd: fix DAI used for headset recording
arm64: dts: qcom: x1e80100-crd: fix WCD audio codec TX port mapping
soc: qcom: pmic_glink: disable UCSI on sc8280xp
arm64: defconfig: enable Elan i2c-hid driver
arm64: dts: qcom: sc8280xp-crd: use external pull up for touch reset
arm64: dts: qcom: sc8280xp-x13s: fix touchscreen power on
arm64: dts: qcom: x1e80100: Fix PCIe 6a reg offsets and add MHI
arm64: dts: qcom: sa8775p: Correct IRQ number of EL2 non-secure physical timer
arm64: dts: allwinner: Fix PMIC interrupt number
arm64: dts: qcom: sc8280xp: Set status = "reserved" on PSHOLD
arm64: dts: qcom: x1e80100-*: Allocate some CMA buffers
arm64: dts: qcom: sc8180x: Fix LLCC reg property again
Pull char / misc driver fixes from Greg KH:
"Here are some small remaining driver fixes for 6.10-final that have
all been in linux-next for a while and resolve reported issues.
Included in here are:
- mei driver fixes (and a spelling fix at the end just to be clean)
- iio driver fixes for reported problems
- fastrpc bugfixes
- nvmem small fixes"
* tag 'char-misc-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
mei: vsc: Fix spelling error
mei: vsc: Enhance SPI transfer of IVSC ROM
mei: vsc: Utilize the appropriate byte order swap function
mei: vsc: Prevent timeout error with added delay post-firmware download
mei: vsc: Enhance IVSC chipset stability during warm reboot
nvmem: core: limit cell sysfs permissions to main attribute ones
nvmem: core: only change name to fram for current attribute
nvmem: meson-efuse: Fix return value of nvmem callbacks
nvmem: rmem: Fix return value of rmem_read()
misc: microchip: pci1xxxx: Fix return value of nvmem callbacks
hpet: Support 32-bit userspace
misc: fastrpc: Restrict untrusted app to attach to privileged PD
misc: fastrpc: Fix ownership reassignment of remote heap
misc: fastrpc: Fix memory leak in audio daemon attach operation
misc: fastrpc: Avoid updating PD type for capability request
misc: fastrpc: Copy the complete capability structure to user
misc: fastrpc: Fix DSP capabilities request
iio: light: apds9306: Fix error handing
iio: trigger: Fix condition for own trigger
Pull tty / serial fixes from Greg KH:
"Here are some small serial driver fixes for 6.10-final. Included in
here are:
- qcom-geni fixes for a much much much discussed issue and everyone
now seems to be agreed that this is the proper way forward to
resolve the reported lockups
- imx serial driver bugfixes
- 8250_omap errata fix
- ma35d1 serial driver bugfix
All of these have been in linux-next for over a week with no reported
issues"
* tag 'tty-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: qcom-geni: do not kill the machine on fifo underrun
serial: qcom-geni: fix hard lockup on buffer flush
serial: qcom-geni: fix soft lockup on sw flow control and suspend
serial: imx: ensure RTS signal is not left active after shutdown
tty: serial: ma35d1: Add a NULL check for of_node
serial: 8250_omap: Fix Errata i2310 with RX FIFO level check
serial: imx: only set receiver level if it is zero
Pull USB fixes from Greg KH:
"Here are some small USB driver fixes and new device ids for
6.10-final. Included in here are:
- new usb-serial device ids for reported devices
- syzbot-triggered duplicate endpoint bugfix
- gadget bugfix for configfs memory overwrite
- xhci resume bugfix
- new device quirk added
- usb core error path bugfix
All of these have been in linux-next (most for a while) with no
reported issues"
* tag 'usb-6.10-final' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: mos7840: fix crash on resume
USB: serial: option: add Rolling RW350-GL variants
USB: serial: option: add support for Foxconn T99W651
USB: serial: option: add Netprisma LCUK54 series modules
usb: gadget: configfs: Prevent OOB read/write in usb_string_copy()
usb: dwc3: pci: add support for the Intel Panther Lake
usb: core: add missing of_node_put() in usb_of_has_devices_or_graph
USB: Add USB_QUIRK_NO_SET_INTF quirk for START BP-850k
USB: core: Fix duplicate endpoint bug by clearing reserved bits in the descriptor
xhci: always resume roothubs if xHC was reset during resume
USB: serial: option: add Telit generic core-dump composition
USB: serial: option: add Fibocom FM350-GL
USB: serial: option: add Telit FN912 rmnet compositions
Pull sound fixes from Takashi Iwai:
"The majority of changes here are small device-specific fixes for ASoC
SOF / Intel and usual HD-audio quirks.
The only significant high LOC is found in the Cirrus firmware driver,
but all those are for hardening against malicious firmware blobs, and
they look fine for taking as a last minute fix, too"
* tag 'sound-6.10' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
ALSA: hda/realtek: Enable Mute LED on HP 250 G7
firmware: cs_dsp: Use strnlen() on name fields in V1 wmfw files
ALSA: hda/realtek: Limit mic boost on VAIO PRO PX
ALSA: hda: cs35l41: Fix swapped l/r audio channels for Lenovo ThinBook 13x Gen4
ASoC: SOF: Intel: hda-pcm: Limit the maximum number of periods by MAX_BDL_ENTRIES
ASoC: rt711-sdw: add missing readable registers
ASoC: SOF: Intel: hda: fix null deref on system suspend entry
ALSA: hda/realtek: add quirk for Clevo V5[46]0TU
firmware: cs_dsp: Prevent buffer overrun when processing V2 alg headers
firmware: cs_dsp: Validate payload length before processing block
firmware: cs_dsp: Return error if block header overflows file
firmware: cs_dsp: Fix overflow checking of wmfw header
Pull more bcachefs fixes from Kent Overstreet:
- revert the SLAB_ACCOUNT patch, something crazy is going on in memcg
and someone forgot to test
- minor fixes: missing rcu_read_lock(), scheduling while atomic (in an
emergency shutdown path)
- two lockdep fixes; these could have gone earlier, but were left to
bake awhile
* tag 'bcachefs-2024-07-12' of https://evilpiepirate.org/git/bcachefs:
bcachefs: bch2_gc_btree() should not use btree_root_lock
bcachefs: Set PF_MEMALLOC_NOFS when trans->locked
bcachefs; Use trans_unlock_long() when waiting on allocator
Revert "bcachefs: Mark bch_inode_info as SLAB_ACCOUNT"
bcachefs: fix scheduling while atomic in break_cycle()
bcachefs: Fix RCU splat
Srujana Challa says:
====================
Fixes for CPT and RSS configuration
This series of patches fixes various issues related to CPT
configuration and RSS configuration.
v1->v2:
- Excluded the patch "octeontx2-af: reduce cpt flt interrupt vectors for
cn10kb" to submit it to net-next.
- Addressed the review comments.
Kiran Kumar K (1):
octeontx2-af: Fix issue with IPv6 ext match for RSS
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
While performing RSS based on IPv4, packets with
IPv4 options are not being considered. Adding changes
to match both plain IPv4 and IPv4 with option header.
Fixes: 41a7aa7b80 ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Satheesh Paul <psatheesh@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
While performing RSS based on IPv6, extension ltype
is not being considered. This will be problem for
fragmented packets or packets with extension header.
Adding changes to match IPv6 ext header along with IPv6
ltype.
Fixes: 41a7aa7b80 ("octeontx2-af: NIX Rx flowkey configuration for RSS")
Signed-off-by: Kiran Kumar K <kirankumark@marvell.com>
Reviewed-by: Kalesh AP <kalesh-anakkur.purayil@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Checksum and length checks are not enabled for IPv4 header with
options and IPv6 with extension headers.
To fix this a change in enum npc_kpu_lc_ltype is required which will
allow adjustment of LTYPE_MASK to detect all types of IP headers.
Fixes: 21e6699e5c ("octeontx2-af: Add NPC KPU profile")
Signed-off-by: Michal Mazur <mmazur2@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
This patch fixes CPT_LF_ALLOC mailbox error due to
incompatible mailbox message format. Specifically, it
corrects the `blkaddr` field type from `int` to `u8`.
Fixes: de2854c87c ("octeontx2-af: Mailbox changes for 98xx CPT block")
Signed-off-by: Srujana Challa <schalla@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Replace slot id with global CPT lf id on reg read/write as
CPTPF/VF driver would send slot number instead of global
lf id in the reg offset. And also update the mailbox response
with the global lf's register offset.
Fixes: ae454086e3 ("octeontx2-af: add mailbox interface for CPT")
Signed-off-by: Nithin Dabilpuram <ndabilpuram@marvell.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
If we encounter an error on i2c packet transmit, we won't have a valid
flow anymore; since we didn't transmit a valid packet sequence, we'll
have to wait for the key to timeout instead of dropping it on the reply.
This causes the i2c lock to be held for longer than necessary.
Instead, invalidate the flow on TX error, and release the i2c lock
immediately.
Cc: Bonnie Lo <Bonnie_Lo@wiwynn.com>
Tested-by: Jerry C Chen <Jerry_C_Chen@wiwynn.com>
Signed-off-by: Jeremy Kerr <jk@codeconstruct.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
FREESCALE SOC DRIVERS has been orphaned since
commit eaac25d026 ("MAINTAINERS: Drop Li Yang as their email address
stopped working")
QUICC ENGINE LIBRARY has Qiang Zhao as maintainer but he hasn't
responded for years and when Li Yang was still maintaining FREESCALE
SOC DRIVERS he was also handling QUICC ENGINE LIBRARY directly.
As a maintainer of LINUX FOR POWERPC EMBEDDED PPC8XX AND PPC83XX, I
also need FREESCALE SOC DRIVERS to be actively maintained, so add
myself as maintainer of FREESCALE SOC DRIVERS and QUICC ENGINE LIBRARY.
See below link for more context.
Link: https://lore.kernel.org/linuxppc-dev/20240219153016.ntltc76bphwrv6hn@skbuf/T/#mf6d4a5eef79e8eae7ae0456a2794c01e630a6756
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
There are many generations of omaps to maintain, and I will be only active
as a hobbyist with time permitting. Let's add more maintainers to ensure
continued Linux support.
TI is interested in maintaining the active SoCs such as am3, am4 and
dra7. And the hobbyists are interested in maintaining some of the older
devices, mainly based on omap3 and 4 SoCs.
Kevin and Roger have agreed to maintain the active TI parts. Both Kevin
and Roger have been working on the omap variants for a long time, and
have a good understanding of the hardware.
Aaro and Andreas have agreed to maintain the community devices. Both Aaro
and Andreas have long experience on working with the earlier TI SoCs.
While at it, let's also change me to be a reviewer for the omap1, and
drop the link to my old omap web page.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Acked-by: Kevin Hilman <khilman@baylibre.com>
Acked-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: Roger Quadros <rogerq@kernel.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
When handling colliding L2TPv3 session IDs, we use the existing
session IDR entry and link the new session on that using
session->coll_list. However, when using an existing IDR entry, we must
not do the idr_replace step.
Fixes: aa5e17e1f5 ("l2tp: store l2tpv3 sessions in per-net IDR")
Signed-off-by: James Chapman <jchapman@katalix.com>
Signed-off-by: Tom Parkin <tparkin@katalix.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
link_is_up() and tipc_link_is_up() have the same functionality.
Consolidate these functions.
Signed-off-by: Shigeru Yoshida <syoshida@redhat.com>
Reviewed-by: Tung Nguyen <tung.q.nguyen@endava.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Breno Leitao says:
====================
netconsole: improve code clarity
These changes aim to enhance the reliability of netconsole by
eliminating the potential race condition and improve maintainability
by making the code more straightforward to understand and modify.
====================
Link: https://patch.msgid.link/20240709144403.544099-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When disabling a netconsole target, enabled_store() is called with
enabled=false. Currently, this results in updating the nt->enabled
field twice:
1. Inside the if/else block, with the target_list_lock spinlock held
2. Later, without the target_list_lock
This patch eliminates the redundancy by setting the field only once,
improving efficiency and reducing potential race conditions.
Signed-off-by: Breno Leitao <leitao@debian.org>
Link: https://patch.msgid.link/20240709144403.544099-3-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
There are a couple of places where the test script "sleep"s to wait for
some external condition to be met.
This is error prone, specially in slow systems (identified in CI by
"KSFT_MACHINE_SLOW=yes").
To fix this, add a "ovs_wait" function that tries to execute a command
a few times until it succeeds. The timeout used is set to 5s for
"normal" systems and doubled if a slow CI machine is detected.
This should make the following work:
$ vng --build \
--config tools/testing/selftests/net/config \
--config kernel/configs/debug.config
$ vng --run . --user root -- "make -C tools/testing/selftests/ \
KSFT_MACHINE_SLOW=yes TARGETS=net/openvswitch run_tests"
Signed-off-by: Adrian Moreno <amorenoz@redhat.com>
Reviewed-by: Ilya Maximets <i.maximets@ovn.org>
Link: https://patch.msgid.link/20240710090500.1655212-1-amorenoz@redhat.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
In fact, this structure contains a flexible array at the end, but
historically its size, alignment etc., is calculated manually.
There are several instances of the structure embedded into other
structures, but also there's ongoing effort to remove them and we
could in the meantime declare &net_device properly.
Declare the array explicitly, use struct_size() and store the array
size inside the structure, so that __counted_by() can be applied.
Don't use PTR_ALIGN(), as SLUB itself tries its best to ensure the
allocated buffer is aligned to what the user expects.
Also, change its alignment from %NETDEV_ALIGN to the cacheline size
as per several suggestions on the netdev ML.
bloat-o-meter for vmlinux:
free_netdev 445 440 -5
netdev_freemem 24 - -24
alloc_netdev_mqs 1481 1450 -31
On x86_64 with several NICs of different vendors, I was never able to
get a &net_device pointer not aligned to the cacheline size after the
change.
Signed-off-by: Alexander Lobakin <aleksander.lobakin@intel.com>
Signed-off-by: Breno Leitao <leitao@debian.org>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Kees Cook <kees@kernel.org>
Link: https://patch.msgid.link/20240710113036.2125584-1-leitao@debian.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
To have enough space to write all possible sprintf() args. Currently
'name' size is 16, but the first '%s' specifier may already need at
least 16 characters, since 'bnad->netdev->name' is used there.
For '%d' specifiers, assume that they require:
* 1 char for 'tx_id + tx_info->tcb[i]->id' sum, BNAD_MAX_TXQ_PER_TX is 8
* 2 chars for 'rx_id + rx_info->rx_ctrl[i].ccb->id', BNAD_MAX_RXP_PER_RX
is 16
And replace sprintf with snprintf.
Detected using the static analysis tool - Svace.
Fixes: 8b230ed8ec ("bna: Brocade 10Gb Ethernet device driver")
Signed-off-by: Alexey Kodanev <aleksei.kodanev@bell-sw.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Remove wrong EIO to EGAIN conversion and pass all errors as is.
After commit 230f3d53a5 ("i40e: remove i40e_status"), which should only
replace F/W specific error codes with Linux kernel generic, all EIO errors
suddenly started to be converted into EAGAIN which leads nvmupdate to retry
until it timeouts and sometimes fails after more than 20 minutes in the
middle of NVM update, so NVM becomes corrupted.
The bug affects users only at the time when they try to update NVM, and
only F/W versions that generate errors while nvmupdate. For example, X710DA2
with 0x8000ECB7 F/W is affected, but there are probably more...
Command for reproduction is just NVM update:
./nvmupdate64
In the log instead of:
i40e_nvmupd_exec_aq err I40E_ERR_ADMIN_QUEUE_ERROR aq_err I40E_AQ_RC_ENOMEM)
appears:
i40e_nvmupd_exec_aq err -EIO aq_err I40E_AQ_RC_ENOMEM
i40e: eeprom check failed (-5), Tx/Rx traffic disabled
The problematic code did silently convert EIO into EAGAIN which forced
nvmupdate to ignore EAGAIN error and retry the same operation until timeout.
That's why NVM update takes 20+ minutes to finish with the fail in the end.
Fixes: 230f3d53a5 ("i40e: remove i40e_status")
Co-developed-by: Kelvin Kang <kelvin.kang@intel.com>
Signed-off-by: Kelvin Kang <kelvin.kang@intel.com>
Reviewed-by: Arkadiusz Kubalewski <arkadiusz.kubalewski@intel.com>
Signed-off-by: Aleksandr Loktionov <aleksandr.loktionov@intel.com>
Reviewed-by: Przemek Kitszel <przemyslaw.kitszel@intel.com>
Tested-by: Tony Brelinski <tony.brelinski@intel.com>
Signed-off-by: Tony Nguyen <anthony.l.nguyen@intel.com>
Reviewed-by: Jacob Keller <jacob.e.keller@intel.com>
Link: https://patch.msgid.link/20240710224455.188502-1-anthony.l.nguyen@intel.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
Kalle Valo says:
====================
wireless-next patches for v6.11
Most likely the last "new features" pull request for v6.11 with
changes both in stack and in drivers. The big thing is the multiple
radios for wiphy feature which makes it possible to better advertise
radio capabilities to user space. mt76 enabled MLO and iwlwifi
re-enabled MLO, ath12k and rtw89 Wi-Fi 6 devices got WoWLAN support.
Major changes:
cfg80211/mac80211
* remove DEAUTH_NEED_MGD_TX_PREP flag
* multiple radios per wiphy support
mac80211_hwsim
* multi-radio wiphy support
ath12k
* DebugFS support for datapath statistics
* WCN7850: support for WoW (Wake on WLAN)
* WCN7850: device-tree bindings
ath11k
* QCA6390: device-tree bindings
iwlwifi
* mvm: re-enable Multi-Link Operation (MLO)
* aggregation (A-MSDU) optimisations
rtw89
* preparation for RTL8852BE-VT support
* WoWLAN support for WiFi 6 chips
* 36-bit PCI DMA support
mt76
* mt7925 Multi-Link Operation (MLO) support
* tag 'wireless-next-2024-07-11' of git://git.kernel.org/pub/scm/linux/kernel/git/wireless/wireless-next: (204 commits)
wifi: mac80211: fix AP chandef capturing in CSA
wifi: iwlwifi: correctly reference TSO page information
wifi: mt76: mt792x: fix scheduler interference in drv own process
wifi: mt76: mt7925: enabling MLO when the firmware supports it
wifi: mt76: mt7925: remove the unused mt7925_mcu_set_chan_info
wifi: mt76: mt7925: update mt7925_mac_link_bss_add for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_basic_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_set_timing for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_phy_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_rate_ctrl_tlv for MLO
wifi: mt76: mt7925: add mt7925_mcu_sta_eht_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_update for MLO
wifi: mt76: mt7925: update mt7925_mcu_add_bss_info for MLO
wifi: mt76: mt7925: update mt7925_mcu_bss_mld_tlv for MLO
wifi: mt76: mt7925: update mt7925_mcu_sta_mld_tlv for MLO
wifi: mt76: mt7925: add mt7925_[assign,unassign]_vif_chanctx
wifi: mt76: add def_wcid to struct mt76_wcid
wifi: mt76: mt7925: report link information in rx status
wifi: mt76: mt7925: update rate index according to link id
wifi: mt76: mt7925: add link handling in the mt7925_ipv6_addr_change
...
====================
Link: https://patch.msgid.link/20240711102353.0C849C116B1@smtp.kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
When user submits a rxfh set command without touching XFRM_SYM_XOR,
rxfh.input_xfrm is set to RXH_XFRM_NO_CHANGE, which is equal to 0xff.
Testing if (rxfh.input_xfrm & RXH_XFRM_SYM_XOR &&
!ops->cap_rss_sym_xor_supported)
return -EOPNOTSUPP;
Will always be true on devices that don't set cap_rss_sym_xor_supported,
since rxfh.input_xfrm & RXH_XFRM_SYM_XOR is always true, if input_xfrm
was not set, i.e RXH_XFRM_NO_CHANGE=0xff, which will result in failure
of any command that doesn't require any change of XFRM, e.g RSS context
or hash function changes.
To avoid this breakage, test if rxfh.input_xfrm != RXH_XFRM_NO_CHANGE
before testing other conditions. Note that the problem will only trigger
with XFRM-aware userspace, old ethtool CLI would continue to work.
Fixes: 0dd415d155 ("net: ethtool: add a NO_CHANGE uAPI for new RXFH's input_xfrm")
Signed-off-by: Saeed Mahameed <saeedm@nvidia.com>
Reviewed-by: Ahmed Zaki <ahmed.zaki@intel.com>
Link: https://patch.msgid.link/20240710225538.43368-1-saeed@kernel.org
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
IFLA_MAX is increasing slowly but surely.
Some compilers use more than 512 bytes of stack in rtnetlink_rcv_msg()
because it calls rtnl_calcit() for RTM_GETLINK message.
Use noinline_for_stack attribute to not inline rtnl_calcit(),
and directly use nla_for_each_attr_type() (Jakub suggestion)
because we only care about IFLA_EXT_MASK at this stage.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reviewed-by: Simon Horman <horms@kernel.org>
Link: https://patch.msgid.link/20240710151653.3786604-1-edumazet@google.com
Signed-off-by: Jakub Kicinski <kuba@kernel.org>
btree_root_lock is for the root keys in btree_root, not the pointers to
the nodes themselves; this fixes a lock ordering issue between
btree_root_lock and btree node locks.
Signed-off-by: Kent Overstreet <kent.overstreet@linux.dev>
