Add support for AD4111/AD4112/AD4114/AD4115/AD4116.
The AD411X family encompasses a series of low power, low noise, 24-bit,
sigma-delta analog-to-digital converters that offer a versatile range of
specifications.
This family of ADCs integrates an analog front end suitable for processing
both fully differential and single-ended, bipolar voltage inputs
addressing a wide array of industrial and instrumentation requirements.
- All ADCs have inputs with a precision voltage divider with a division
ratio of 10.
- AD4116 has 5 low level inputs without a voltage divider.
- AD4111 and AD4112 support current inputs (0 mA to 20 mA) using a 50ohm
shunt resistor.
Signed-off-by: Dumitru Ceclan <dumitru.ceclan@analog.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Reviewed-by: David Lechner <dlechner@baylibre.com>
Link: https://patch.msgid.link/20240607-ad4111-v7-9-97e3855900a0@analog.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
The current error handling for calls such as devm_clk_get_enabled() in
the adi-axi-adc probe() function means that, if a property such as
'clocks' (for example) is not present in the devicetree when booting a
kernel with the driver enabled, the resulting error message will be
vague, e.g.:
|adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2
Change the devm_clk_get_enabled(), devm_regmap_init_mmio(), and
devm_iio_backend_register() checks to use dev_err_probe() with some
context for easier debugging.
After the change:
|adi_axi_adc 44a00000.backend: error -ENOENT: failed to get clock
|adi_axi_adc 44a00000.backend: probe with driver adi_axi_adc failed with error -2
Signed-off-by: Trevor Gamblin <tgamblin@baylibre.com>
Reviewed-by: Nuno Sa <nuno.sa@analog.com>
Link: https://patch.msgid.link/20240613163407.2147884-1-tgamblin@baylibre.com
Signed-off-by: Jonathan Cameron <Jonathan.Cameron@huawei.com>
Pull parisc fix from Helge Deller:
"On parisc we have suffered since years from random segfaults which
seem to have been triggered due to cache inconsistencies. Those
segfaults happened more often on machines with PA8800 and PA8900 CPUs,
which have much bigger caches than the earlier machines.
Dave Anglin has worked over the last few weeks to fix this bug. His
patch has been successfully tested by various people on various
machines and with various kernels (6.6, 6.8 and 6.9), and the debian
buildd servers haven't shown a single random segfault with this patch.
Since the cache handling has been reworked, the patch is slightly
bigger than I would like in this stage, but the greatly improved
stability IMHO justifies the inclusion now"
* tag 'parisc-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: Try to fix random segmentation faults in package builds
Pull i2c fixes from Wolfram Sang:
"Two fixes to correctly report i2c functionality, ensuring that
I2C_FUNC_SLAVE is reported when a device operates solely as a slave
interface"
* tag 'i2c-for-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/wsa/linux:
i2c: designware: Fix the functionality flags of the slave-only interface
i2c: at91: Fix the functionality flags of the slave-only interface
Pull USB / Thunderbolt fixes from Greg KH:
"Here are some small USB and Thunderbolt driver fixes for 6.10-rc4.
Included in here are:
- thunderbolt debugfs bugfix
- USB typec bugfixes
- kcov usb bugfix
- xhci bugfixes
- usb-storage bugfix
- dt-bindings bugfix
- cdc-wdm log message spam bugfix
All of these, except for the last cdc-wdm log level change, have been
in linux-next for a while with no reported problems. The cdc-wdm
bugfix has been tested by syzbot and proved to fix the reported cpu
lockup issues when the log is constantly spammed by a broken device"
* tag 'usb-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: class: cdc-wdm: Fix CPU lockup caused by excessive log messages
xhci: Handle TD clearing for multiple streams case
xhci: Apply broken streams quirk to Etron EJ188 xHCI host
xhci: Apply reset resume quirk to Etron EJ188 xHCI host
xhci: Set correct transferred length for cancelled bulk transfers
usb-storage: alauda: Check whether the media is initialized
usb: typec: ucsi: Ack also failed Get Error commands
kcov, usb: disable interrupts in kcov_remote_start_usb_softirq
dt-bindings: usb: realtek,rts5411: Add missing "additionalProperties" on child nodes
usb: typec: tcpm: Ignore received Hard Reset in TOGGLING state
usb: typec: tcpm: fix use-after-free case in tcpm_register_source_caps
USB: xen-hcd: Traverse host/ when CONFIG_USB_XEN_HCD is selected
usb: typec: ucsi: glink: increase max ports for x1e80100
Revert "usb: chipidea: move ci_ulpi_init after the phy initialization"
thunderbolt: debugfs: Fix margin debugfs node creation condition
Pull tty/serial driver fixes from Greg KH:
"Here are some small tty and serial driver fixes that resolve som
reported problems. Included in here are:
- n_tty lookahead buffer bugfix
- WARN_ON() removal where it was not needed
- 8250_dw driver bugfixes
- 8250_pxa bugfix
- sc16is7xx Kconfig fixes for reported build issues
All of these have been in linux-next for over a week with no reported
problems"
* tag 'tty-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
serial: drop debugging WARN_ON_ONCE() from uart_write()
serial: sc16is7xx: re-add Kconfig SPI or I2C dependency
serial: sc16is7xx: rename Kconfig CONFIG_SERIAL_SC16IS7XX_CORE
serial: port: Don't block system suspend even if bytes are left to xmit
serial: 8250_pxa: Configure tx_loadsz to match FIFO IRQ level
serial: 8250_dw: Revert "Move definitions to the shared header"
serial: 8250_dw: Don't use struct dw8250_data outside of 8250_dw
tty: n_tty: Fix buffer offsets when lookahead is used
Pull staging driver fix from Greg KH:
"Here is a single staging driver fix, for the vc04 driver. It resolves
a reported problem that showed up in the merge window set of changes.
It's been in linux-next for over a week with no reported problems"
* tag 'staging-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
staging: vchiq_debugfs: Fix NPD in vchiq_dump_state
Pull driver core and sysfs fixes from Greg KH:
"Here are three small changes for 6.10-rc4 that resolve reported
problems, and finally drop an unused api call. These are:
- removal of devm_device_add_groups(), all the callers of this are
finally gone after the 6.10-rc1 merge (changes came in through
different trees), so it's safe to remove.
- much reported sysfs build error fixed up for systems that did not
have sysfs enabled
- driver core sync issue fix for a many reported issue over the years
that no one really paid much attention to, until Dirk finally
tracked down the real issue and made the "obviously correct and
simple" fix for it.
All of these have been in linux-next for over a week with no reported
problems"
* tag 'driver-core-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
drivers: core: synchronize really_probe() and dev_uevent()
sysfs: Unbreak the build around sysfs_bin_attr_simple_read()
driver core: remove devm_device_add_groups()
Pull char/misc driver fixes from Greg KH:
"Here are a number of small char/misc and iio driver fixes for
6.10-rc4. Included in here are the following:
- iio driver fixes for a bunch of reported problems.
- mei driver fixes for a number of reported issues.
- amiga parport driver build fix.
- .editorconfig fix that was causing lots of unintended whitespace
changes to happen to files when they were being edited. Unless we
want to sweep the whole tree and remove all trailing whitespace at
once, this is needed for the .editorconfig file to be able to be
used at all. This change is required because the original
submitters never touched older files in the tree.
- jfs bugfix for a buffer overflow
The jfs bugfix is in here as I didn't know where else to put it, and
it's been ignored for a while as the filesystem seems to be abandoned
and I'm tired of seeing the same issue reported in multiple places.
All of these have been in linux-next with no reported issues"
* tag 'char-misc-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (25 commits)
.editorconfig: remove trim_trailing_whitespace option
jfs: xattr: fix buffer overflow for invalid xattr
misc: microchip: pci1xxxx: Fix a memory leak in the error handling of gp_aux_bus_probe()
misc: microchip: pci1xxxx: fix double free in the error handling of gp_aux_bus_probe()
parport: amiga: Mark driver struct with __refdata to prevent section mismatch
mei: vsc: Fix wrong invocation of ACPI SID method
mei: vsc: Don't stop/restart mei device during system suspend/resume
mei: me: release irq in mei_me_pci_resume error path
mei: demote client disconnect warning on suspend to debug
iio: inkern: fix channel read regression
iio: imu: inv_mpu6050: stabilized timestamping in interrupt
iio: adc: ad7173: Fix sampling frequency setting
iio: adc: ad7173: Clear append status bit
iio: imu: inv_icm42600: delete unneeded update watermark call
iio: imu: inv_icm42600: stabilized timestamp in interrupt
iio: invensense: fix odr switching to same value
iio: adc: ad7173: Remove index from temp channel
iio: adc: ad7173: Add ad7173_device_info names
iio: adc: ad7173: fix buffers enablement for ad7176-2
iio: temperature: mlx90635: Fix ERR_PTR dereference in mlx90635_probe()
...
Pull ata fix from Niklas Cassel:
"Fix a bug where the SCSI Removable Media Bit (RMB) was incorrectly set
for hot-plug capable (and eSATA) ports.
The RMB bit means that the media is removable (e.g. floppy or CD-ROM),
not that the device server is removable. If the RMB bit is set, SCSI
will set the removable media sysfs attribute.
If the removable media sysfs attribute is set on a device,
GNOME/udisks will automatically mount the device on boot.
We only want to set the SCSI RMB bit (and thus the removable media
sysfs attribute) for devices where the ATA removable media device bit
is set"
* tag 'ata-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/libata/linux:
ata: libata-scsi: Set the RMB bit only for removable media devices
Pull EDAC fixes from Borislav Petkov:
- Fix two issues with MI300 address translation logic
* tag 'edac_urgent_for_v6.10_rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ras/ras:
RAS/AMD/ATL: Use system settings for MI300 DRAM to normalized address translation
RAS/AMD/ATL: Fix MI300 bank hash
Pull firewire fixes from Takashi Sakamoto:
- Update tracepoints events introduced in v6.10-rc1 so that it includes
the numeric identifier of host card in which the event happens
- replace wiki URL with the current website URL in Kconfig
* tag 'firewire-fixes-6.10-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/ieee1394/linux1394:
firewire: core: record card index in bus_reset_handle tracepoints event
firewire: core: record card index in tracepoinrts events derived from bus_reset_arrange_template
firewire: core: record card index in async_phy_inbound tracepoints event
firewire: core: record card index in async_phy_outbound_complete tracepoints event
firewire: core: record card index in async_phy_outbound_initiate tracepoints event
firewire: core: record card index in tracepoinrts events derived from async_inbound_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_initiate_template
firewire: core: record card index in tracepoinrts events derived from async_outbound_complete_template
firewire: fix website URL in Kconfig
Commit 66601a29bb ("leds: class: If no default trigger is given, make
hw_control trigger the default trigger") causes ledtrig-netdev to get
set as default trigger on various network LEDs.
This causes users to hit a pre-existing AB-BA deadlock issue in
ledtrig-netdev between the LED-trigger locks and the rtnl mutex,
resulting in hung tasks in kernels >= 6.9.
Solving the deadlock is non trivial, so for now revert the change to
set the hw_control trigger as default trigger, so that ledtrig-netdev
no longer gets activated automatically for various network LEDs.
The netdev trigger is not needed because the network LEDs are usually under
hw-control and the netdev trigger tries to leave things that way so setting
it as the active trigger for the LED class device is a no-op.
Fixes: 66601a29bb ("leds: class: If no default trigger is given, make hw_control trigger the default trigger")
Reported-by: Genes Lists <lists@sapience.com>
Closes: https://lore.kernel.org/all/9d189ec329cfe68ed68699f314e191a10d4b5eda.camel@sapience.com/
Reported-by: Johannes Wüller <johanneswueller@gmail.com>
Closes: https://lore.kernel.org/lkml/e441605c-eaf2-4c2d-872b-d8e541f4cf60@gmail.com/
Cc: stable@vger.kernel.org
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Lee Jones <lee@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Two fixes from Jean aim to correctly report i2c functionality,
specifically ensuring that I2C_FUNC_SLAVE is reported when a
device operates solely as a slave interface.
