ASoC: Fixes for v6.10
A few fairly small fixes for ASoC, there's a relatively large set of
hardening changes for the cs_dsp firmware file parsing and a couple of
other small device specific fixes.
Use strnlen() instead of strlen() on the algorithm and coefficient name
string arrays in V1 wmfw files.
In V1 wmfw files the name is a NUL-terminated string in a fixed-size
array. cs_dsp should protect against overrunning the array if the NUL
terminator is missing.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240708144855.385332-1-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
MIDI2 Set Tempo message defines the tempo in 10ns unit for finer
accuracy, while MIDI1 was defined in 1us unit. For adapting this
different unit, introduce "tempo_base" field to snd_seq_queue_tempo
struct so that user-space can pass the proper tempo base unit.
The accepted value is limited, it must be either 0, 10 or 1000.
The protocol version is bumped to 1.0.4 along with this.
The access with the older protocol version ignores the tempo-base
value in ioctls and always treats as 1000.
Reviewed-by: Jaroslav Kysela <perex@perex.cz>
Link: https://patch.msgid.link/20240705160344.6481-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Until the commit e11f0f90a6 ("ALSA: pcm: remove SNDRV_PCM_IOCTL1_INFO
internal command"), there was a possibility to pass information
about the synchronized streams to the user space. The mentioned
commit removed blindly the appropriate code with an irrelevant comment.
The revert may be appropriate, but since this API was lost for several
years without any complains, it's time to improve it. The hardware
parameters may change the used stream clock source (e.g. USB hardware)
so move this synchronization ID to hw_params as read-only field.
It seems that pipewire can benefit from this API (disable adaptive
resampling for perfectly synchronized PCM streams) now.
Note that the contents of ID is not supposed to be used for direct
comparison with a specific byte sequence. The "empty" case is when
all bytes are zero (driver does not offer this information)
and all other cases must be only used for equal comparison among
PCM streams (including different sound cards) if they are using
identical hardware clock.
Cc: Takashi Sakamoto <takaswie@kernel.org>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Link: https://patch.msgid.link/20240625172836.589380-2-perex@perex.cz
Check that all fields of a V2 algorithm header fit into the available
firmware data buffer.
The wmfw V2 format introduced variable-length strings in the algorithm
block header. This means the overall header length is variable, and the
position of most fields varies depending on the length of the string
fields. Each field must be checked to ensure that it does not overflow
the firmware data buffer.
As this ia bugfix patch, the fixes avoid making any significant change to
the existing code. This makes it easier to review and less likely to
introduce new bugs.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-5-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Move the payload length check in cs_dsp_load() and cs_dsp_coeff_load()
to be done before the block is processed.
The check that the length of a block payload does not exceed the number
of remaining bytes in the firwmware file buffer was being done near the
end of the loop iteration. However, some code before that check used the
length field without validating it.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-4-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Return an error from cs_dsp_power_up() if a block header is longer
than the amount of data left in the file.
The previous code in cs_dsp_load() and cs_dsp_load_coeff() would loop
while there was enough data left in the file for a valid region. This
protected against overrunning the end of the file data, but it didn't
abort the file processing with an error.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-3-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
Fix the checking that firmware file buffer is large enough for the
wmfw header, to prevent overrunning the buffer.
The original code tested that the firmware data buffer contained
enough bytes for the sums of the size of the structs
wmfw_header + wmfw_adsp1_sizes + wmfw_footer
But wmfw_adsp1_sizes is only used on ADSP1 firmware. For ADSP2 and
Halo Core the equivalent struct is wmfw_adsp2_sizes, which is
4 bytes longer. So the length check didn't guarantee that there
are enough bytes in the firmware buffer for a header with
wmfw_adsp2_sizes.
This patch splits the length check into three separate parts. Each
of the wmfw_header, wmfw_adsp?_sizes and wmfw_footer are checked
separately before they are used.
Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: f6bc909e76 ("firmware: cs_dsp: add driver to support firmware loading on Cirrus Logic DSPs")
Link: https://patch.msgid.link/20240627141432.93056-2-rf@opensource.cirrus.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ASoC: Fixes for v6.10
A relatively large batch of updates, largely due to the long interval
since I last sent fixes due to various travel and holidays. There's a
lot of driver specific fixes and quirks in here, none of them too major,
and also some fixes for recently introduced memory safety issues in the
topology code.
The conversion of SPP to MIDI2 UMP called a wrong function, and the
secondary argument wasn't taken. As a result, MSB of SPP was always
zero. Fix to call the right function.
Fixes: e9e02819a9 ("ALSA: seq: Automatic conversion of UMP events")
Link: https://patch.msgid.link/20240626145141.16648-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
The recent fix for Lenovo IdeaPad 330-17IKB replaced the quirk entry,
and this eventually breaks the existing quirk for Lenovo Yoga Duet 7
13ITL6 equipped with the same PCI SSID 17aa:3820.
For applying a proper quirk for each model, check the codec SSID
additionally. Fortunately Yoga Duet has a different codec SSID,
0x17aa3802.
(Interestingly, 17aa:3802 has another conflict of SSID between another
Yoga model vs 14IRP8 which we had to work around similarly.)
Fixes: b1fd0d1285 ("ALSA: hda/realtek: Enable headset mic on IdeaPad 330-17IKB 81DM")
Link: https://patch.msgid.link/20240625155217.18767-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Both snd_dmaengine_pcm_close() and
snd_dmaengine_pcm_close_release_chan() are almost identical except for
a call of dma_release_channel() in the latter. For code
simplification, unify them internally.
Just a code refactoring, and no functional changes.
Link: https://patch.msgid.link/20240625113356.2123-1-tiwai@suse.de
Signed-off-by: Takashi Iwai <tiwai@suse.de>
When dmaengine supports pause function, in suspend state,
dmaengine_pause() is called instead of dmaengine_terminate_async(),
In end of playback stream, the runtime->state will go to
SNDRV_PCM_STATE_DRAINING, if system suspend & resume happen
at this time, application will not resume playback stream, the
stream will be closed directly, the dmaengine_terminate_async()
will not be called before the dmaengine_synchronize(), which
violates the call sequence for dmaengine_synchronize().
This behavior also happens for capture streams, but there is no
SNDRV_PCM_STATE_DRAINING state for capture. So use
dmaengine_tx_status() to check the DMA status if the status is
DMA_PAUSED, then call dmaengine_terminate_async() to terminate
dmaengine before dmaengine_synchronize().
Signed-off-by: Shengjiu Wang <shengjiu.wang@nxp.com>
Link: https://patch.msgid.link/1718851218-27803-1-git-send-email-shengjiu.wang@nxp.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Commit e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component
and rework codec link") removed the codec entry for the ETDM1_OUT_BE
dai link entirely instead of replacing it with COMP_EMPTY(). This worked
by accident as the remaining COMP_EMPTY() platform entry became the codec
entry, and the platform entry became completely empty, effectively the
same as COMP_DUMMY() since snd_soc_fill_dummy_dai() doesn't do anything
for platform entries.
This causes a KASAN out-of-bounds warning in mtk_soundcard_common_probe()
in sound/soc/mediatek/common/mtk-soundcard-driver.c:
for_each_card_prelinks(card, i, dai_link) {
if (adsp_node && !strncmp(dai_link->name, "AFE_SOF", strlen("AFE_SOF")))
dai_link->platforms->of_node = adsp_node;
else if (!dai_link->platforms->name && !dai_link->platforms->of_node)
dai_link->platforms->of_node = platform_node;
}
where the code expects the platforms array to have space for at least one entry.
Add an COMP_EMPTY() entry so that dai_link->platforms has space.
Fixes: e70b8dd267 ("ASoC: mediatek: mt8195: Remove afe-dai component and rework codec link")
Signed-off-by: Chen-Yu Tsai <wenst@chromium.org>
Reviewed-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@collabora.com>
Link: https://patch.msgid.link/20240624061257.3115467-1-wenst@chromium.org
Signed-off-by: Mark Brown <broonie@kernel.org>
priv->pdev pointer was set after being used in
fsl_asoc_card_audmux_init().
Move this assignment at the start of the probe function, so
sub-functions can correctly use pdev through priv.
fsl_asoc_card_audmux_init() dereferences priv->pdev to get access to the
dev struct, used with dev_err macros.
As priv is zero-initialised, there would be a NULL pointer dereference.
Note that if priv->dev is dereferenced before assignment but never used,
for example if there is no error to be printed, the driver won't crash
probably due to compiler optimisations.
Fixes: 708b4351f0 ("ASoC: fsl: Add Freescale Generic ASoC Sound Card with ASRC support")
Signed-off-by: Elinor Montmasson <elinor.montmasson@savoirfairelinux.com>
Link: https://patch.msgid.link/20240620132511.4291-2-elinor.montmasson@savoirfairelinux.com
Signed-off-by: Mark Brown <broonie@kernel.org>
The ACPI IDs used in the CS35L56 HDA drivers are all handled by the
serial multi-instantiate driver which starts multiple Linux device
instances from a single ACPI Device() node.
As serial multi-instantiate is not an optional part of the system add it
as a dependency in Kconfig so that it is not overlooked.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240619161602.117452-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
chip->flag variable assignment will be skipped when acp platform device
creation is skipped. In this case chip>flag value will not be set.
chip->flag variable should be assigned along with other structure
variables for 'chip' structure. Move chip->flag variable assignment
prior to acp platform device creation.
Fixes: 3a94c8ad0a ("ASoC: amd: acp: add code for scanning acp pdm controller")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-3-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
ACP supports different pin configurations for I2S IO. Checking ACP pin
configuration value against specific value breaks the functionality for
other I2S pin configurations. This check is no longer required in i2s dai
driver probe call as i2s configuration check will be verified during acp
platform device creation sequence.
Remove i2s_mode check in acp_i2s_probe() function.
Fixes: b24484c18b ("ASoC: amd: acp: ACP code generic to support newer platforms")
Signed-off-by: Vijendar Mukunda <Vijendar.Mukunda@amd.com>
Link: https://msgid.link/r/20240617072844.871468-2-Vijendar.Mukunda@amd.com
Signed-off-by: Mark Brown <broonie@kernel.org>
It is possible that during system boot when there multiple devices
attempting simultaneous initialization on a slow control bus the
download of firmware and tuning data may take a user perceivable amount
of time (a slow I2C bus with 4 amps this work could take over 2
seconds).
Adopt a pattern used in the ASoC driver and perform this activity in a
background thread so that interactive performance is not impaired. The
system_long_wq is a parallel workqueue and driver instances will perform
their firmware downloads in parallel to make best use of available bus
bandwidth.
Signed-off-by: Simon Trimmer <simont@opensource.cirrus.com>
Link: https://lore.kernel.org/20240618130011.62860-1-simont@opensource.cirrus.com
Signed-off-by: Takashi Iwai <tiwai@suse.de>
