Oded writes:
This tag contains the following changes for 5.12-rc1:
- Improve communication protocol with device CPU CP application.
The change prevents random (rare) out-of-sync errors.
- Notify F/W to start sending events only after initialization of
device is done. This fixes the issue where fatal events were received
but ignored.
- Fix integer handling (static analysis warning).
- Always fetch HBM ECC errors from F/W (if available).
- Minor fix in GAUDI-specific initialization code.
* tag 'misc-habanalabs-next-2021-02-08' of https://git.kernel.org/pub/scm/linux/kernel/git/ogabbay/linux:
habanalabs/gaudi: don't enable clock gating on DMA5
habanalabs: return block size + block ID
habanalabs: update security map after init CPU Qs
habanalabs: enable F/W events after init done
habanalabs/gaudi: use HBM_ECC_EN bit for ECC ERR
habanalabs: support fetching first available user CQ
habanalabs: improve communication protocol with cpucp
habanalabs: fix integer handling issue
Vinod writes:
soundwire updates for 5.12-rc1
Updates forv5.12-rc1 are:
- New no_pm IO routines and the usage in Intel drivers
- Intel driver & Cadence lib updates
* tag 'soundwire-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/vkoul/soundwire:
soundwire: bus: clarify dev_err/dbg device references
soundwire: bus: fix confusion on device used by pm_runtime
soundwire: export sdw_write/read_no_pm functions
soundwire: bus: use no_pm IO routines for all interrupt handling
soundwire: bus: use sdw_write_no_pm when setting the bus scale registers
soundwire: bus: use sdw_update_no_pm when initializing a device
soundwire: Revert "soundwire: debugfs: use controller id instead of link_id"
soundwire: return earlier if no slave is attached
soundwire: bus: add better dev_dbg to track complete() calls
soundwire: cadence: adjust verbosity in response handling
soundwire: cadence: fix ACK/NAK handling
soundwire: bus: add more details to track failed transfers
soundwire: cadence: add status in dev_dbg 'State change' log
soundwire: use consistent format for Slave devID logs
soundwire: intel: don't return error when clock stop failed
soundwire: debugfs: use controller id instead of link_id
MAINTAINERS: soundwire: Add soundwire tree
soundwire: sysfs: Constify static struct attribute_group
soundwire: cadence: reduce timeout on transactions
soundwire: intel: Use kzalloc for allocating only one thing
The driver core ignores the return value of mei_cl_device_remove() so
passing an error value doesn't solve any problem. As most mei drivers'
remove callbacks return 0 unconditionally and returning a different value
doesn't have any effect, change this prototype to return void and return 0
unconditionally in mei_cl_device_remove(). The only driver that could
return an error value is modified to emit an explicit warning in the error
case.
Acked-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208073705.428185-3-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
The driver core only calls a bus' remove function when there is actually
a driver and a device. So drop the needless check and assign cldrv earlier.
(Side note: The check for cldev being non-NULL is broken anyhow, because
to_mei_cl_device() is a wrapper around container_of() for a member that is
not the first one. So cldev only can become NULL if dev is (void *)0xc
(for archs with 32 bit pointers) or (void *)0x18 (for archs with 64 bit
pointers).)
Signed-off-by: Uwe Kleine-König <uwe@kleine-koenig.org>
Link: https://lore.kernel.org/r/20210208073705.428185-2-uwe@kleine-koenig.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Graph Compiler uses DMA5 in a non-standard way and it requires the
driver to disable clock gating on that DMA.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
When user gives us a block address to get its ID to mmap it, he also
needs to get from us the block size to pass to the driver in the mmap
function.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
when reading CPU_BOOT_DEV_STS0 reg after FW reports SRAM AVAILABLE the
value in the register might not yet be updated by FW.
to overcome this issue another "up-to-date" read of this register is
done at the end of CPU queues init.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Only after the initialization of the device is done, the driver is
ready to receive events from the F/W. The driver can't handle events
before that because of races so it will ignore events. In case of
a fatal event, the driver won't know about it and the device will be
operational although it shouldn't be.
Same logic should be applied after hard-reset.
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
driver should use ECC info from FW only if HBM ECC CAP is set.
otherwise, try to fetch the data from MC regs only if security is
disabled.
Signed-off-by: Ohad Sharabi <osharabi@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Current messaging communictaion protocol with cpucp can get out
of sync due to coherency issues. In order to improve the protocol
reliability, we modify the protocol to expect a different
acknowledgment for every packet sent to cpucp.
Signed-off-by: Ofir Bitton <obitton@habana.ai>
Reviewed-by: Oded Gabbay <ogabbay@kernel.org>
Signed-off-by: Oded Gabbay <ogabbay@kernel.org>
Intel stress-tests routinely report IO timeouts and invalid power
management transitions. Upon further analysis, we seem to be using the
wrong devices in pm_runtime calls.
Before reading and writing registers, we first need to make sure the
Slave is fully resumed. The existing code attempts to do such that,
however because of a confusion dating from 2017 and copy/paste, we
end-up resuming the parent only instead of resuming the codec device.
This can lead to accesses to the Slave registers while the bus is
still being configured and the Slave not enumerated, and as a result
IO errors occur.
This is a classic problem, similar confusions happened for HDaudio
between bus and codec device, leading to power management issues.
Fix by using the relevant device for all uses of pm_runtime functions.
Fixes: 60ee9be255 ('soundwire: bus: add PM/no-PM versions of read/write functions')
Fixes: aa79293517 ('soundwire: bus: fix io error when processing alert event')
Fixes: 9d715fa005 ('soundwire: Add IO transfer')
Reported-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Signed-off-by: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Reviewed-by: Rander Wang <rander.wang@linux.intel.com>
Signed-off-by: Bard Liao <yung-chuan.liao@linux.intel.com>
Link: https://lore.kernel.org/r/20210122070634.12825-9-yung-chuan.liao@linux.intel.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
This reverts commit 6d5e7af1f6 ("soundwire: debugfs: use controller id
instead of link_id") for now while we arrive at a better way for this.
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Don't populate the const array cfg1_settings on the stack but instead make
it static. Makes the object code smaller by 24 bytes:
Before:
text data bss dec hex filename
73585 20240 64 93889 16ec1 drivers/phy/qualcomm/phy-qcom-qmp.o
After:
text data bss dec hex filename
73465 20336 64 93865 16ea9 drivers/phy/qualcomm/phy-qcom-qmp.o
(gcc version 10.2.0)
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Link: https://lore.kernel.org/r/20210204180313.108876-1-colin.king@canonical.com
Signed-off-by: Vinod Koul <vkoul@kernel.org>
Manivannan writes:
MHI changes for v5.12
Loic improved the MHI PCI generic controller by adding support for DIAG channel,
PCI error handling, suspend/recovery/resume, and health check. Loic also added
support for resetting the MHI device as per the MHI specification. This includes
writing to a specific register for default cases and looking for controller
specific callback when provided.
Along with this Loic, also added a new API which gets the number for free TREs
(Transfer Ring Elements) from the MHI core. The client drivers can make use of
this API and the current consumer is the "mhi-net" driver. For taking both the
"mhi-net" driver change and the API change, we created "mhi-net-immutable"
branch for this patch and merged the same into net-next and mhi-next.
Carl added a patch which lets the controller driver to pass the custom IRQ
flags for BHI and MHI event interrupts to the MHI core. The current consumer of
this feature is the ath11k MHI controller driver. For taking both the changes,
we created "mhi-ath11k-immutable" branch for this patch and merged into
ath11k-next and mhi-next.
Finally, Loic cleaned up the MHI queue APIs and fixed the shared MSI vector
support.
* tag 'mhi-for-v5.12' of git://git.kernel.org/pub/scm/linux/kernel/git/mani/mhi:
bus: mhi: pci_generic: Increase num of elements in hw event ring
mhi: pci_generic: Print warning in case of firmware crash
bus: mhi: core: Add helper API to return number of free TREs
mhi: core: Factorize mhi queuing
mhi: use irq_flags if controller driver configures it
mhi: pci_generic: Fix shared MSI vector support
mhi: unconstify mhi_event_config
bus: mhi: Ensure correct ring update ordering with memory barrier
mhi: pci_generic: Set irq moderation value to 1ms for hw channels
mhi: pci_generic: Add diag channels
mhi: pci_generic: Increase controller timeout value
mhi: pci_generic: Add health-check
mhi: pci_generic: Add PCI error handlers
mhi: pci_generic: Add suspend/resume/recovery procedure
mhi: pci_generic: Add support for reset
mhi: pci_generic: Enable burst mode for hardware channels
mhi: pci-generic: Increase number of hardware events
bus: mhi: core: Add device hardware reset support
Georgi writes:
interconnect changes for 5.12
Here are the interconnect changes for the 5.12-rc1 merge window
consisting of driver updates.
Driver changes:
- Refactoring and consolidation of drivers.
- New driver for MSM8939 platforms.
- New driver for SDX55 platforms.
Signed-off-by: Georgi Djakov <djakov@kernel.org>
* tag 'icc-5.12-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/djakov/icc:
interconnect: qcom: Add SDX55 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm SDX55 DT bindings
interconnect: qcom: Add MSM8939 interconnect provider driver
dt-bindings: interconnect: Add Qualcomm MSM8939 DT bindings
dt-bindings: interconnect: single yaml file for RPM interconnect drivers
interconnect: qcom: qcs404: use shared code
interconnect: qcom: Consolidate interconnect RPM support
The nvmem cell binding applies to all eeprom child nodes matching
"^.*@[0-9a-f]+$" without taking a compatible into account.
Linux drivers, like at24, are even more extensive and assume
_all_ at24 eeprom child nodes to be nvmem cells since e888d445ac
("nvmem: resolve cells from DT at registration time").
Since df5f3b6f53 ("dt-bindings: nvmem: stm32: new property for
data access"), the additionalProperties: True means it's Ok to have
other properties as long as they don't match "^.*@[0-9a-f]+$".
The barebox bootloader extends the MTD partitions binding to
EEPROM and can fix up following device tree node:
&eeprom {
partitions {
compatible = "fixed-partitions";
};
};
This is allowed binding-wise, but drivers using nvmem_register()
like at24 will fail to parse because the function expects all child
nodes to have a reg property present. This results in the whole
EEPROM driver probe failing despite the device tree being correct.
Fix this by skipping nodes lacking a reg property instead of
returning an error. This effectively makes the drivers adhere
to the binding because all nodes with a unit address must have
a reg property and vice versa.
Fixes: e888d445ac ("nvmem: resolve cells from DT at registration time").
Signed-off-by: Ahmad Fatoum <a.fatoum@pengutronix.de>
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Link: https://lore.kernel.org/r/20210129171430.11328-6-srinivas.kandagatla@linaro.org
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
