If the operation mode is non-zero and an external reference voltage is set,
first the operation mode is written to the advanced configuration register,
followed by the externel reference enable bit,
resetting the configuration mode to 0.
To fix this, first compose the value of the advanced configuration register
based on the configuration mode and the external reference voltage.
The advanced configuration register is then written to the device,
if it is different from the default register value (0x0).
Signed-off-by: Roy van Doormaal <roy.van.doormaal@prodrive-technologies.com>
Link: https://lore.kernel.org/r/20200728151846.231785-1-roy.van.doormaal@prodrive-technologies.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The return value of pci_read_config_*() may not indicate a device error.
However, the value read by these functions is more likely to indicate
this kind of error. This presents two overlapping ways of reporting
errors and complicates error checking.
It is possible to move to one single way of checking for error if the
dependency on the return value of these functions is removed, then it
can later be made to return void.
Remove all uses of the return value of pci_read_config_*().
Check the actual value read for ~0. In this case, ~0 is an invalid
value thus it indicates some kind of error.
Suggested-by: Bjorn Helgaas <bjorn@helgaas.com>
Signed-off-by: Saheed O. Bolarinwa <refactormyself@gmail.com>
Link: https://lore.kernel.org/r/20200801112446.149549-11-refactormyself@gmail.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
The sparse tool complains as follows:
drivers/hwmon/sparx5-temp.c:150:27: warning:
symbol 's5_temp_match' was not declared. Should it be static?
This variable is not used outside of sparx5-temp.c, this commit
marks it static.
Fixes: c2cb4b5777e1 ("hwmon: sparx5: Add Sparx5 SoC temperature driver")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Link: https://lore.kernel.org/r/20200721134919.34033-1-weiyongjun1@huawei.com
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This adds the possibility for reading pwm values.
These can not be read if the device is controlled via
fan_target or a fan curve and will return an error in
this case. Since an error is expected, this adds some
rudimentary error handling.
Changes:
- add CTL_GET_FAN_PWM and use it via get_data
- pwm returns -ENODATA if the device returns error 0x12
- fan_target now returns -ENODATA when the driver is
started or a pwm value is set.
- add ccp_get_errno to determine errno from device error.
- get_data now has a parameter to determine whether
to read one or two bytes of data.
- update documentation
- fix missing surname in MAINTAINERS
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719192544.61247-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719191534.61181-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719190525.61112-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719183548.61011-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719182539.60944-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719181530.60878-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719180521.60811-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719175512.60745-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200719170420.60399-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If neither `\bgnu\.org/license`, nor `\bmozilla\.org/MPL\b`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200713140028.34775-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
This is v7 of a driver for the Corsair Commander Pro.
It provides sysfs attributes for:
- Reading fan speed
- Reading temp sensors
- Reading voltage values
- Writing pwm and reading last written pwm
- Reading fan and temp connection status
It is an usb driver, so it needs to be ignored by usbhid.
The Corsair Commander Pro is a fan controller and provides
no means for user interaction.
The two device numbers are there, because there is a slightly
different version of the same device. (Only difference
seem to be in some presets.)
Squashed:
hwmon: (corsair-cpro) add fan_target
This adds fan_target entries to the corsair-cpro driver.
Reading the attribute from the device does not seem possible, so
it returns the last set value (same as pwm).
send_usb_cmd now has one more argument, which is needed for the
fan_target command.
hwmon: corsair-cpro: Change to HID driver
This changes corsair-cpro to a hid driver using hid reports.
Signed-off-by: Marius Zachmann <mail@mariuszachmann.de>
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Link: https://lore.kernel.org/r/20200626055936.4441-1-mail@mariuszachmann.de
Link: https://lore.kernel.org/r/20200709141413.30790-1-mail@mariuszachmann.de
[groeck: Squashed follow-up patches to avoid changes in HID code]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Rationale:
Reduces attack surface on kernel devs opening the links for MITM
as HTTPS traffic is much harder to manipulate.
Deterministic algorithm:
For each file:
If not .svg:
For each line:
If doesn't contain `\bxmlns\b`:
For each link, `\bhttp://[^# \t\r\n]*(?:\w|/)`:
If both the HTTP and HTTPS versions
return 200 OK and serve the same content:
Replace HTTP with HTTPS.
Signed-off-by: Alexander A. Klimov <grandmaster@al2klimov.de>
Link: https://lore.kernel.org/r/20200703185657.15329-1-grandmaster@al2klimov.de
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Using s64 type, instead of long type, for internal calculations and for
the sysfs interface.
This allows 64-bit values to appear correctly on 32-bit kernels.
As wattage is reported in microwatts, monitoring a power supply over
2KW requires this.
Although it may seem unlikely to run a 32-bit kernel on such a large
machine, enterprise servers often include a BMC, and the BMC might be
running a 32-bit kernel.
Signed-off-by: Josh Lehan <krellan@google.com>
[groeck: Removed Change-Id and other tags, reformatted description]
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull perf tooling fixes from Arnaldo Carvalho de Melo:
- Update hashmap.h from libbpf and kvm.h from x86's kernel UAPI.
- Set opt->set in libsubcmd's OPT_CALLBACK_SET(). This fixes
'perf record --switch-output-event event-name' usage"
* tag 'perf-tools-fixes-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/acme/linux:
tools arch kvm: Sync kvm headers with the kernel sources
perf tools: Sync hashmap.h with libbpf's
libsubcmd: Fix OPT_CALLBACK_SET()
Pull x86 fixes from Thomas Gleixner:
"A pile of fixes for x86:
- Fix the I/O bitmap invalidation on XEN PV, which was overlooked in
the recent ioperm/iopl rework. This caused the TSS and XEN's I/O
bitmap to get out of sync.
- Use the proper vectors for HYPERV.
- Make disabling of stack protector for the entry code work with GCC
builds which enable stack protector by default. Removing the option
is not sufficient, it needs an explicit -fno-stack-protector to
shut it off.
- Mark check_user_regs() noinstr as it is called from noinstr code.
The missing annotation causes it to be placed in the text section
which makes it instrumentable.
- Add the missing interrupt disable in exc_alignment_check()
- Fixup a XEN_PV build dependency in the 32bit entry code
- A few fixes to make the Clang integrated assembler happy
- Move EFI stub build to the right place for out of tree builds
- Make prepare_exit_to_usermode() static. It's not longer called from
ASM code"
* tag 'x86-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/boot: Don't add the EFI stub to targets
x86/entry: Actually disable stack protector
x86/ioperm: Fix io bitmap invalidation on Xen PV
x86: math-emu: Fix up 'cmp' insn for clang ias
x86/entry: Fix vectors to IDTENTRY_SYSVEC for CONFIG_HYPERV
x86/entry: Add compatibility with IAS
x86/entry/common: Make prepare_exit_to_usermode() static
x86/entry: Mark check_user_regs() noinstr
x86/traps: Disable interrupts in exc_aligment_check()
x86/entry/32: Fix XEN_PV build dependency
Pull timer fixes from Thomas Gleixner:
"Two fixes for the timer wheel:
- A timer which is already expired at enqueue time can set the
base->next_expiry value backwards. As a consequence base->clk can
be set back as well. This can lead to timers expiring early. Add a
sanity check to prevent this.
- When a timer is queued with an expiry time beyond the wheel
capacity then it should be queued in the bucket of the last wheel
level which is expiring last.
The code adjusted the expiry time to the maximum wheel capacity,
which is only correct when the wheel clock is 0. Aside of that the
check whether the delta is larger than wheel capacity does not
check the delta, it checks the expiry value itself. As a result
timers can expire at random.
Fix this by checking the right variable and adjust expiry time so
it becomes base->clock plus capacity which places it into the
outmost bucket in the last wheel level"
* tag 'timers-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
timer: Fix wheel index calculation on last level
timer: Prevent base->clk from moving backward
Pull scheduler fixes from Thomas Gleixner:
"A set of scheduler fixes:
- Plug a load average accounting race which was introduced with a
recent optimization casing load average to show bogus numbers.
- Fix the rseq CPU id initialization for new tasks. sched_fork() does
not update the rseq CPU id so the id is the stale id of the parent
task, which can cause user space data corruption.
- Handle a 0 return value of task_h_load() correctly in the load
balancer, which does not decrease imbalance and therefore pulls
until the maximum number of loops is reached, which might be all
tasks just created by a fork bomb"
* tag 'sched-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
sched/fair: handle case of task_h_load() returning 0
sched: Fix unreliable rseq cpu_id for new tasks
sched: Fix loadavg accounting race
Pull irq fixes from Thomas Gleixner:
"Two fixes for the interrupt subsystem:
- Make the handling of the firmware node consistent and do not free
the node after the domain has been created successfully. The core
code stores a pointer to it which can lead to a use after free or
double free.
This used to "work" because the pointer was not stored when the
initial code was written, but at some point later it was required
to store it. Of course nobody noticed that the existing users break
that way.
- Handle affinity setting on inactive interrupts correctly when
hierarchical irq domains are enabled.
When interrupts are inactive with the modern hierarchical irqdomain
design, the interrupt chips are not necessarily in a state where
affinity changes can be handled. The legacy irq chip design allowed
this because interrupts are immediately fully initialized at
allocation time. X86 has a hacky workaround for this, but other
implementations do not.
This cased malfunction on GIC-V3. Instead of playing whack a mole
to find all affected drivers, change the core code to store the
requested affinity setting and then establish it when the interrupt
is allocated, which makes the X86 hack go away"
* tag 'irq-urgent-2020-07-19' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
genirq/affinity: Handle affinity setting on inactive interrupts correctly
irqdomain/treewide: Keep firmware node unconditionally allocated
Pull USB fixes from Greg KH:
"Here are a few small USB fixes, and one thunderbolt fix, for 5.8-rc6.
Nothing huge in here, just the normal collection of gadget, dwc2/3,
serial, and other minor USB driver fixes and id additions. Full
details are in the shortlog.
All of these have been in linux-next for a while with no reported
issues"
* tag 'usb-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
USB: serial: iuu_phoenix: fix memory corruption
USB: c67x00: fix use after free in c67x00_giveback_urb
usb: gadget: function: fix missing spinlock in f_uac1_legacy
usb: gadget: udc: atmel: fix uninitialized read in debug printk
usb: gadget: udc: atmel: remove outdated comment in usba_ep_disable()
usb: dwc2: Fix shutdown callback in platform
usb: cdns3: trace: fix some endian issues
usb: cdns3: ep0: fix some endian issues
usb: gadget: udc: gr_udc: fix memleak on error handling path in gr_ep_init()
usb: gadget: fix langid kernel-doc warning in usbstring.c
usb: dwc3: pci: add support for the Intel Jasper Lake
usb: dwc3: pci: add support for the Intel Tiger Lake PCH -H variant
usb: chipidea: core: add wakeup support for extcon
USB: serial: option: add Quectel EG95 LTE modem
thunderbolt: Fix path indices used in USB3 tunnel discovery
USB: serial: ch341: add new Product ID for CH340
USB: serial: option: add GosunCn GM500 series
USB: serial: cypress_m8: enable Simply Automated UPB PIM
Pull dma-mapping fixes from Christoph Hellwig:
"Ensure we always have fully addressable memory in the dma coherent
pool (Nicolas Saenz Julienne)"
* tag 'dma-mapping-5.8-6' of git://git.infradead.org/users/hch/dma-mapping:
dma-pool: do not allocate pool memory from CMA
dma-pool: make sure atomic pool suits device
dma-pool: introduce dma_guess_pool()
dma-pool: get rid of dma_in_atomic_pool()
dma-direct: provide function to check physical memory area validity
vmlinux-objs-y is added to targets, which currently means that the EFI
stub gets added to the targets as well. It shouldn't be added since it
is built elsewhere.
This confuses Makefile.build which interprets the EFI stub as a target
$(obj)/$(objtree)/drivers/firmware/efi/libstub/lib.a
and will create drivers/firmware/efi/libstub/ underneath
arch/x86/boot/compressed, to hold this supposed target, if building
out-of-tree. [0]
Fix this by pulling the stub out of vmlinux-objs-y into efi-obj-y.
[0] See scripts/Makefile.build near the end:
# Create directories for object files if they do not exist
Signed-off-by: Arvind Sankar <nivedita@alum.mit.edu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Reviewed-by: Masahiro Yamada <masahiroy@kernel.org>
Acked-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lkml.kernel.org/r/20200715032631.1562882-1-nivedita@alum.mit.edu
Some builds of GCC enable stack protector by default. Simply removing
the arguments is not sufficient to disable stack protector, as the stack
protector for those GCC builds must be explicitly disabled. Remove the
argument removals and add -fno-stack-protector. Additionally include
missed x32 argument updates, and adjust whitespace for readability.
Fixes: 20355e5f73 ("x86/entry: Exclude low level entry code from sanitizing")
Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Link: https://lkml.kernel.org/r/202006261333.585319CA6B@keescook
Pull SCSI fix from James Bottomley:
"One small driver fix. Although the one liner makes it sound like a
cosmetic change, it's a regression fix for the megaraid_sas driver"
* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
scsi: megaraid_sas: Remove undefined ENABLE_IRQ_POLL macro
Pull hwmon fixes from Guenter Roeck:
- Using SCT on some Tohsiba drives causes firmware hangs. Disable its
use in the drivetemp driver.
- Handle potential buffer overflows in scmi and aspeed-pwm-tacho
driver.
- Energy reporting does not work well on all AMD CPUs. Restrict
amd_energy to known working models.
- Enable reading the CPU temperature on NCT6798D using undocumented
registers.
- Fix read errors seen if PEC is enabled in adm1275 driver.
- Fix setting the pwm1_enable in emc2103 driver.
* tag 'hwmon-for-v5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (drivetemp) Avoid SCT usage on Toshiba DT01ACA family drives
hwmon: (scmi) Fix potential buffer overflow in scmi_hwmon_probe()
hwmon: (nct6775) Accept PECI Calibration as temperature source for NCT6798D
hwmon: (adm1275) Make sure we are reading enough data for different chips
hwmon: (emc2103) fix unable to change fan pwm1_enable attribute
hwmon: (amd_energy) match for supported models
hwmon: (aspeed-pwm-tacho) Avoid possible buffer overflow
Pull RISC-V fixes from Palmer Dabbelt:
"Two fixes:
- 16KiB kernel stacks on rv64, which fixes a lot of crashes.
- Rolling an mmiowb() into the scheduler, which when combined with
Will's fix to the mmiowb()-on-spinlock should fix the PREEMPT
issues we've been seeing"
* tag 'riscv-for-linus-5.8-rc6' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
RISC-V: Upgrade smp_mb__after_spinlock() to iorw,iorw
riscv: use 16KB kernel stack on 64-bit
Pull powerpc fixes from Michael Ellerman:
"Some more powerpc fixes for 5.8:
- A fix to the VAS code we merged this cycle, to report the proper
error code to userspace for address translation failures. And a
selftest update to match.
- Another fix for our pkey handling of PROT_EXEC mappings.
- A fix for a crash when booting a "secure VM" under an ultravisor
with certain numbers of CPUs.
Thanks to: Aneesh Kumar K.V, Haren Myneni, Laurent Dufour, Sandipan
Das, Satheesh Rajendran, Thiago Jung Bauermann"
* tag 'powerpc-5.8-7' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
selftests/powerpc: Use proper error code to check fault address
powerpc/vas: Report proper error code for address translation failure
powerpc/pseries/svm: Fix incorrect check for shared_lppaca_size
powerpc/book3s64/pkeys: Fix pkey_access_permitted() for execute disable pkey
It has been observed that Toshiba DT01ACA family drives have
WRITE FPDMA QUEUED command timeouts and sometimes just freeze until
power-cycled under heavy write loads when their temperature is getting
polled in SCT mode. The SMART mode seems to be fine, though.
Let's make sure we don't use SCT mode for these drives then.
While only the 3 TB model was actually caught exhibiting the problem let's
play safe here to avoid data corruption and extend the ban to the whole
family.
Fixes: 5b46903d8b ("hwmon: Driver for disk and solid state drives with temperature sensors")
Cc: stable@vger.kernel.org
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Link: https://lore.kernel.org/r/0cb2e7022b66c6d21d3f189a12a97878d0e7511b.1595075458.git.mail@maciej.szmigiero.name
Signed-off-by: Guenter Roeck <linux@roeck-us.net>
Pull NFS client fixes from Anna Schumaker:
"A few more NFS client bugfixes for Linux 5.8:
NFS:
- Fix interrupted slots by using the SEQUENCE operation
SUNRPC:
- revert d03727b248 to fix unkillable IOs
xprtrdma:
- Fix double-free in rpcrdma_ep_create()
- Fix recursion into rpcrdma_xprt_disconnect()
- Fix return code from rpcrdma_xprt_connect()
- Fix handling of connect errors
- Fix incorrect header size calculations"
* tag 'nfs-for-5.8-3' of git://git.linux-nfs.org/projects/anna/linux-nfs:
SUNRPC reverting d03727b248 ("NFSv4 fix CLOSE not waiting for direct IO compeletion")
xprtrdma: fix incorrect header size calculations
NFS: Fix interrupted slots by sending a solo SEQUENCE operation
xprtrdma: Fix handling of connect errors
xprtrdma: Fix return code from rpcrdma_xprt_connect()
xprtrdma: Fix recursion into rpcrdma_xprt_disconnect()
xprtrdma: Fix double-free in rpcrdma_ep_create()
Pull ARM SoC fixes from Arnd Bergmann:
"This time there are a number of actual code fixes, plus a small set of
device tree issues getting addressed:
Renesas:
- one defconfig cleanup to allow a later Kconfig change
Intel socfpga:
- enable QSPI devices on some machines
- fix DTC validation warnings
TI OMAP:
- Two DEBUG_ATOMIC_SLEEP fixes for ti-sysc interconnect target
module driver
- A regression fix for ti-sysc no-idle handling that caused issues
compared to earlier platform data based booting
- A fix for memory leak for omap_hwmod_allocate_module
- Fix d_can driver probe for am437x
NXP i.MX:
- A couple of fixes on i.MX platform device registration code to
stop the use of invalid IRQ 0.
- Fix a regression seen on ls1021a platform, caused by commit
52102a3ba6 ("soc: imx: move cpu code to drivers/soc/imx").
- Fix a misconfiguration of audio SSI on imx6qdl-gw551x board.
Amlogic Meson:
- misc DT fixes
- SoC ID fixes to detect all chips correctly"
* tag 'arm-fixes-5.8-2' of git://git.kernel.org/pub/scm/linux/kernel/git/soc/soc:
arm64: dts: spcfpga: Align GIC, NAND and UART nodenames with dtschema
ARM: dts: socfpga: Align L2 cache-controller nodename with dtschema
arm64: dts: stratix10: increase QSPI reg address in nand dts file
arm64: dts: stratix10: add status to qspi dts node
arm64: dts: agilex: add status to qspi dts node
ARM: dts: Fix dcan driver probe failed on am437x platform
ARM: OMAP2+: Fix possible memory leak in omap_hwmod_allocate_module
arm64: defconfig: Enable CONFIG_PCIE_RCAR_HOST
soc: imx: check ls1021a
ARM: imx: Remove imx_add_imx_dma() unused irq_err argument
ARM: imx: Provide correct number of resources when registering gpio devices
ARM: dts: imx6qdl-gw551x: fix audio SSI
bus: ti-sysc: Do not disable on suspend for no-idle
bus: ti-sysc: Fix sleeping function called from invalid context for RTC quirk
bus: ti-sysc: Fix wakeirq sleeping function called from invalid context
ARM: dts: meson: Align L2 cache-controller nodename with dtschema
arm64: dts: meson-gxl-s805x: reduce initial Mali450 core frequency
arm64: dts: meson: add missing gxl rng clock
soc: amlogic: meson-gx-socinfo: Fix S905X3 and S905D3 ID's
